dma: coh901318: push header down into the DMA subsystem

The defines in U300's <mach/coh901318.h> are now only used by
the DMA engine driver itself, so move the header down into the
DMA subsystem.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/dma/coh901318.h b/drivers/dma/coh901318.h
new file mode 100644
index 000000000000..9353c40b152a
--- /dev/null
+++ b/drivers/dma/coh901318.h
@@ -0,0 +1,245 @@
+/*
+ * Copyright (C) 2007-2013 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * DMA driver for COH 901 318
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef COH901318_H
+#define COH901318_H
+
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+#define MAX_DMA_PACKET_SIZE_SHIFT 11
+#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
+
+/**
+ * struct coh901318_lli - linked list item for DMAC
+ * @control: control settings for DMAC
+ * @src_addr: transfer source address
+ * @dst_addr: transfer destination address
+ * @link_addr:  physical address to next lli
+ * @virt_link_addr: virtual address of next lli (only used by pool_free)
+ * @phy_this: physical address of current lli (only used by pool_free)
+ */
+struct coh901318_lli {
+	u32 control;
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	dma_addr_t link_addr;
+
+	void *virt_link_addr;
+	dma_addr_t phy_this;
+};
+/**
+ * struct coh901318_params - parameters for DMAC configuration
+ * @config: DMA config register
+ * @ctrl_lli_last: DMA control register for the last lli in the list
+ * @ctrl_lli: DMA control register for an lli
+ * @ctrl_lli_chained: DMA control register for a chained lli
+ */
+struct coh901318_params {
+	u32 config;
+	u32 ctrl_lli_last;
+	u32 ctrl_lli;
+	u32 ctrl_lli_chained;
+};
+/**
+ * struct coh_dma_channel - dma channel base
+ * @name: ascii name of dma channel
+ * @number: channel id number
+ * @desc_nbr_max: number of preallocated descriptors
+ * @priority_high: prio of channel, 0 low otherwise high.
+ * @param: configuration parameters
+ */
+struct coh_dma_channel {
+	const char name[32];
+	const int number;
+	const int desc_nbr_max;
+	const int priority_high;
+	const struct coh901318_params param;
+};
+
+/**
+ * dma_access_memory_state_t - register dma for memory access
+ *
+ * @dev: The dma device
+ * @active:  1 means dma intends to access memory
+ *           0 means dma wont access memory
+ */
+typedef void (*dma_access_memory_state_t)(struct device *dev,
+					  bool active);
+
+/**
+ * struct powersave - DMA power save structure
+ * @lock: lock protecting data in this struct
+ * @started_channels: bit mask indicating active dma channels
+ */
+struct powersave {
+	spinlock_t lock;
+	u64 started_channels;
+};
+/**
+ * struct coh901318_platform - platform arch structure
+ * @chans_slave: specifying dma slave channels
+ * @chans_memcpy: specifying dma memcpy channels
+ * @access_memory_state: requesting DMA memory access (on / off)
+ * @chan_conf: dma channel configurations
+ * @max_channels: max number of dma chanenls
+ */
+struct coh901318_platform {
+	const int *chans_slave;
+	const int *chans_memcpy;
+	const dma_access_memory_state_t access_memory_state;
+	const struct coh_dma_channel *chan_conf;
+	const int max_channels;
+};
+
+/*
+ * DMA Controller - this access the static mappings of the coh901318 dma.
+ *
+ */
+
+#define COH901318_MOD32_MASK					(0x1F)
+#define COH901318_WORD_MASK					(0xFFFFFFFF)
+/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
+#define COH901318_INT_STATUS1					(0x0000)
+#define COH901318_INT_STATUS2					(0x0004)
+/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_TC_INT_STATUS1				(0x0008)
+#define COH901318_TC_INT_STATUS2				(0x000C)
+/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
+#define COH901318_TC_INT_CLEAR1					(0x0010)
+#define COH901318_TC_INT_CLEAR2					(0x0014)
+/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_RAW_TC_INT_STATUS1				(0x0018)
+#define COH901318_RAW_TC_INT_STATUS2				(0x001C)
+/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
+#define COH901318_BE_INT_STATUS1				(0x0020)
+#define COH901318_BE_INT_STATUS2				(0x0024)
+/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
+#define COH901318_BE_INT_CLEAR1					(0x0028)
+#define COH901318_BE_INT_CLEAR2					(0x002C)
+/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_RAW_BE_INT_STATUS1				(0x0030)
+#define COH901318_RAW_BE_INT_STATUS2				(0x0034)
+
+/*
+ * CX_CFG - Channel Configuration Registers 32bit (R/W)
+ */
+#define COH901318_CX_CFG					(0x0100)
+#define COH901318_CX_CFG_SPACING				(0x04)
+/* Channel enable activates tha dma job */
+#define COH901318_CX_CFG_CH_ENABLE				(0x00000001)
+#define COH901318_CX_CFG_CH_DISABLE				(0x00000000)
+/* Request Mode */
+#define COH901318_CX_CFG_RM_MASK				(0x00000006)
+#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY			(0x0 << 1)
+#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY			(0x1 << 1)
+#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY			(0x1 << 1)
+#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY		(0x3 << 1)
+#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY		(0x3 << 1)
+/* Linked channel request field. RM must == 11 */
+#define COH901318_CX_CFG_LCRF_SHIFT				3
+#define COH901318_CX_CFG_LCRF_MASK				(0x000001F8)
+#define COH901318_CX_CFG_LCR_DISABLE				(0x00000000)
+/* Terminal Counter Interrupt Request Mask */
+#define COH901318_CX_CFG_TC_IRQ_ENABLE				(0x00000200)
+#define COH901318_CX_CFG_TC_IRQ_DISABLE				(0x00000000)
+/* Bus Error interrupt Mask */
+#define COH901318_CX_CFG_BE_IRQ_ENABLE				(0x00000400)
+#define COH901318_CX_CFG_BE_IRQ_DISABLE				(0x00000000)
+
+/*
+ * CX_STAT - Channel Status Registers 32bit (R/-)
+ */
+#define COH901318_CX_STAT					(0x0200)
+#define COH901318_CX_STAT_SPACING				(0x04)
+#define COH901318_CX_STAT_RBE_IRQ_IND				(0x00000008)
+#define COH901318_CX_STAT_RTC_IRQ_IND				(0x00000004)
+#define COH901318_CX_STAT_ACTIVE				(0x00000002)
+#define COH901318_CX_STAT_ENABLED				(0x00000001)
+
+/*
+ * CX_CTRL - Channel Control Registers 32bit (R/W)
+ */
+#define COH901318_CX_CTRL					(0x0400)
+#define COH901318_CX_CTRL_SPACING				(0x10)
+/* Transfer Count Enable */
+#define COH901318_CX_CTRL_TC_ENABLE				(0x00001000)
+#define COH901318_CX_CTRL_TC_DISABLE				(0x00000000)
+/* Transfer Count Value 0 - 4095 */
+#define COH901318_CX_CTRL_TC_VALUE_MASK				(0x00000FFF)
+/* Burst count */
+#define COH901318_CX_CTRL_BURST_COUNT_MASK			(0x0000E000)
+#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES			(0x7 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES			(0x6 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES			(0x5 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES			(0x4 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES			(0x3 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES			(0x2 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES			(0x1 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE			(0x0 << 13)
+/* Source bus size  */
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK			(0x00030000)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS			(0x2 << 16)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS			(0x1 << 16)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS			(0x0 << 16)
+/* Source address increment */
+#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE			(0x00040000)
+#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE			(0x00000000)
+/* Destination Bus Size */
+#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK			(0x00180000)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS			(0x2 << 19)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS			(0x1 << 19)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS			(0x0 << 19)
+/* Destination address increment */
+#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE			(0x00200000)
+#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE			(0x00000000)
+/* Master Mode (Master2 is only connected to MSL) */
+#define COH901318_CX_CTRL_MASTER_MODE_MASK			(0x00C00000)
+#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W			(0x3 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W			(0x2 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M2RW			(0x1 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M1RW			(0x0 << 22)
+/* Terminal Count flag to PER enable */
+#define COH901318_CX_CTRL_TCP_ENABLE				(0x01000000)
+#define COH901318_CX_CTRL_TCP_DISABLE				(0x00000000)
+/* Terminal Count flags to CPU enable */
+#define COH901318_CX_CTRL_TC_IRQ_ENABLE				(0x02000000)
+#define COH901318_CX_CTRL_TC_IRQ_DISABLE			(0x00000000)
+/* Hand shake to peripheral */
+#define COH901318_CX_CTRL_HSP_ENABLE				(0x04000000)
+#define COH901318_CX_CTRL_HSP_DISABLE				(0x00000000)
+#define COH901318_CX_CTRL_HSS_ENABLE				(0x08000000)
+#define COH901318_CX_CTRL_HSS_DISABLE				(0x00000000)
+/* DMA mode */
+#define COH901318_CX_CTRL_DDMA_MASK				(0x30000000)
+#define COH901318_CX_CTRL_DDMA_LEGACY				(0x0 << 28)
+#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1			(0x1 << 28)
+#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2			(0x2 << 28)
+/* Primary Request Data Destination */
+#define COH901318_CX_CTRL_PRDD_MASK				(0x40000000)
+#define COH901318_CX_CTRL_PRDD_DEST				(0x1 << 30)
+#define COH901318_CX_CTRL_PRDD_SOURCE				(0x0 << 30)
+
+/*
+ * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
+ */
+#define COH901318_CX_SRC_ADDR					(0x0404)
+#define COH901318_CX_SRC_ADDR_SPACING				(0x10)
+
+/*
+ * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
+ */
+#define COH901318_CX_DST_ADDR					(0x0408)
+#define COH901318_CX_DST_ADDR_SPACING				(0x10)
+
+/*
+ * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
+ */
+#define COH901318_CX_LNK_ADDR					(0x040C)
+#define COH901318_CX_LNK_ADDR_SPACING				(0x10)
+#define COH901318_CX_LNK_LINK_IMMEDIATE				(0x00000001)
+#endif /* COH901318_H */