diff options
author | Kristian Høgsberg <krh@redhat.com> | 2007-05-30 19:06:35 -0400 |
---|---|---|
committer | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2007-05-31 21:40:14 +0200 |
commit | 2aef469a35a273609beaa7094d5a07c1f6d75285 (patch) | |
tree | 3aad939f26bee97a7998b67a634478d081192cee /drivers/firewire/fw-ohci.c | |
parent | b32744751e751e0abb184cf3b7359c9387a4bdf8 (diff) | |
download | linux-2aef469a35a273609beaa7094d5a07c1f6d75285.tar.gz linux-2aef469a35a273609beaa7094d5a07c1f6d75285.tar.bz2 linux-2aef469a35a273609beaa7094d5a07c1f6d75285.zip |
firewire: Implement suspend/resume PCI driver hooks.
It's a low-impact design, that just makes suspend/resume look like
a bus reset to the upper level drivers, but it should be sufficient.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Diffstat (limited to 'drivers/firewire/fw-ohci.c')
-rw-r--r-- | drivers/firewire/fw-ohci.c | 187 |
1 files changed, 123 insertions, 64 deletions
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 2e4cfa57126d..0d08bf9b78c2 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -417,12 +417,21 @@ ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, u32 regs) ctx->current_buffer = ab.next; ctx->pointer = ctx->current_buffer->data; - reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), - le32_to_cpu(ab.descriptor.branch_address)); + return 0; +} + +static void ar_context_run(struct ar_context *ctx) +{ + struct ar_buffer *ab = ctx->current_buffer; + dma_addr_t ab_bus; + size_t offset; + + offset = offsetof(struct ar_buffer, data); + ab_bus = ab->descriptor.data_address - offset; + + reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), ab_bus | 1); reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN); flush_writes(ctx->ohci); - - return 0; } static void context_tasklet(unsigned long data) @@ -1039,11 +1048,78 @@ static irqreturn_t irq_handler(int irq, void *data) return IRQ_HANDLED; } +static int software_reset(struct fw_ohci *ohci) +{ + int i; + + reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); + + for (i = 0; i < OHCI_LOOP_COUNT; i++) { + if ((reg_read(ohci, OHCI1394_HCControlSet) & + OHCI1394_HCControl_softReset) == 0) + return 0; + msleep(1); + } + + return -EBUSY; +} + static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) { struct fw_ohci *ohci = fw_ohci(card); struct pci_dev *dev = to_pci_dev(card->device); + if (software_reset(ohci)) { + fw_error("Failed to reset ohci card.\n"); + return -EBUSY; + } + + /* + * Now enable LPS, which we need in order to start accessing + * most of the registers. In fact, on some cards (ALI M5251), + * accessing registers in the SClk domain without LPS enabled + * will lock up the machine. Wait 50msec to make sure we have + * full link enabled. + */ + reg_write(ohci, OHCI1394_HCControlSet, + OHCI1394_HCControl_LPS | + OHCI1394_HCControl_postedWriteEnable); + flush_writes(ohci); + msleep(50); + + reg_write(ohci, OHCI1394_HCControlClear, + OHCI1394_HCControl_noByteSwapData); + + reg_write(ohci, OHCI1394_LinkControlSet, + OHCI1394_LinkControl_rcvSelfID | + OHCI1394_LinkControl_cycleTimerEnable | + OHCI1394_LinkControl_cycleMaster); + + reg_write(ohci, OHCI1394_ATRetries, + OHCI1394_MAX_AT_REQ_RETRIES | + (OHCI1394_MAX_AT_RESP_RETRIES << 4) | + (OHCI1394_MAX_PHYS_RESP_RETRIES << 8)); + + ar_context_run(&ohci->ar_request_ctx); + ar_context_run(&ohci->ar_response_ctx); + + reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); + reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000); + reg_write(ohci, OHCI1394_IntEventClear, ~0); + reg_write(ohci, OHCI1394_IntMaskClear, ~0); + reg_write(ohci, OHCI1394_IntMaskSet, + OHCI1394_selfIDComplete | + OHCI1394_RQPkt | OHCI1394_RSPkt | + OHCI1394_reqTxComplete | OHCI1394_respTxComplete | + OHCI1394_isochRx | OHCI1394_isochTx | + OHCI1394_masterIntEnable | + OHCI1394_cycle64Seconds); + + /* Activate link_on bit and contender bit in our self ID packets.*/ + if (ohci_update_phy_reg(card, 4, 0, + PHY_LINK_ACTIVE | PHY_CONTENDER) < 0) + return -EIO; + /* * When the link is not yet enabled, the atomic config rom * update mechanism described below in ohci_set_config_rom() @@ -1701,22 +1777,6 @@ static const struct fw_card_driver ohci_driver = { .stop_iso = ohci_stop_iso, }; -static int software_reset(struct fw_ohci *ohci) -{ - int i; - - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); - - for (i = 0; i < OHCI_LOOP_COUNT; i++) { - if ((reg_read(ohci, OHCI1394_HCControlSet) & - OHCI1394_HCControl_softReset) == 0) - return 0; - msleep(1); - } - - return -EBUSY; -} - static int __devinit pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { @@ -1762,33 +1822,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) goto fail_iomem; } - if (software_reset(ohci)) { - fw_error("Failed to reset ohci card.\n"); - err = -EBUSY; - goto fail_registers; - } - - /* - * Now enable LPS, which we need in order to start accessing - * most of the registers. In fact, on some cards (ALI M5251), - * accessing registers in the SClk domain without LPS enabled - * will lock up the machine. Wait 50msec to make sure we have - * full link enabled. - */ - reg_write(ohci, OHCI1394_HCControlSet, - OHCI1394_HCControl_LPS | - OHCI1394_HCControl_postedWriteEnable); - flush_writes(ohci); - msleep(50); - - reg_write(ohci, OHCI1394_HCControlClear, - OHCI1394_HCControl_noByteSwapData); - - reg_write(ohci, OHCI1394_LinkControlSet, - OHCI1394_LinkControl_rcvSelfID | - OHCI1394_LinkControl_cycleTimerEnable | - OHCI1394_LinkControl_cycleMaster); - ar_context_init(&ohci->ar_request_ctx, ohci, OHCI1394_AsReqRcvContextControlSet); @@ -1801,11 +1834,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) context_init(&ohci->at_response_ctx, ohci, AT_BUFFER_SIZE, OHCI1394_AsRspTrContextControlSet, handle_at_packet); - reg_write(ohci, OHCI1394_ATRetries, - OHCI1394_MAX_AT_REQ_RETRIES | - (OHCI1394_MAX_AT_RESP_RETRIES << 4) | - (OHCI1394_MAX_PHYS_RESP_RETRIES << 8)); - reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0); ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet); reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0); @@ -1835,18 +1863,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) goto fail_registers; } - reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); - reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000); - reg_write(ohci, OHCI1394_IntEventClear, ~0); - reg_write(ohci, OHCI1394_IntMaskClear, ~0); - reg_write(ohci, OHCI1394_IntMaskSet, - OHCI1394_selfIDComplete | - OHCI1394_RQPkt | OHCI1394_RSPkt | - OHCI1394_reqTxComplete | OHCI1394_respTxComplete | - OHCI1394_isochRx | OHCI1394_isochTx | - OHCI1394_masterIntEnable | - OHCI1394_cycle64Seconds); - bus_options = reg_read(ohci, OHCI1394_BusOptions); max_receive = (bus_options >> 12) & 0xf; link_speed = bus_options & 0x7; @@ -1908,6 +1924,45 @@ static void pci_remove(struct pci_dev *dev) fw_notify("Removed fw-ohci device.\n"); } +#ifdef CONFIG_PM +static int pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct fw_ohci *ohci = pci_get_drvdata(pdev); + int err; + + software_reset(ohci); + free_irq(pdev->irq, ohci); + err = pci_save_state(pdev); + if (err) { + fw_error("pci_save_state failed with %d", err); + return err; + } + err = pci_set_power_state(pdev, pci_choose_state(pdev, state)); + if (err) { + fw_error("pci_set_power_state failed with %d", err); + return err; + } + + return 0; +} + +static int pci_resume(struct pci_dev *pdev) +{ + struct fw_ohci *ohci = pci_get_drvdata(pdev); + int err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pci_enable_device(pdev); + if (err) { + fw_error("pci_enable_device failed with %d", err); + return err; + } + + return ohci_enable(&ohci->card, ohci->config_rom, CONFIG_ROM_SIZE); +} +#endif + static struct pci_device_id pci_table[] = { { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) }, { } @@ -1920,6 +1975,10 @@ static struct pci_driver fw_ohci_pci_driver = { .id_table = pci_table, .probe = pci_probe, .remove = pci_remove, +#ifdef CONFIG_PM + .resume = pci_resume, + .suspend = pci_suspend, +#endif }; MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>"); |