firmware: ti_sci: rm: Add new ops for ring configuration

The sysfw ring configuration message has been extended to include virtid
and asel value for the ring.
Add the ASEL_VALID to TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER as it is required
for DMA rings.

Instead of extending the current .config() ops - which would need same
patch change in the ringacc driver - add ti_sci_msg_rm_ring_cfg struct and
a new ops using it to configure the ring.

This will allow easy update path in case new members are added for the ring
configuration.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

2 files changed, 70 insertions, 0 deletions

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 0b801e67e672..a4d2b318795c 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -2120,6 +2120,68 @@ fail:
 }
 
 /**
+ * ti_sci_cmd_rm_ring_cfg() - Configure a NAVSS ring
+ * @handle:	Pointer to TI SCI handle.
+ * @params:	Pointer to ti_sci_msg_rm_ring_cfg ring config structure
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ *
+ * See @ti_sci_msg_rm_ring_cfg and @ti_sci_msg_rm_ring_cfg_req for
+ * more info.
+ */
+static int ti_sci_cmd_rm_ring_cfg(const struct ti_sci_handle *handle,
+				  const struct ti_sci_msg_rm_ring_cfg *params)
+{
+	struct ti_sci_msg_rm_ring_cfg_req *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(handle))
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_RING_CFG,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "RM_RA:Message config failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_rm_ring_cfg_req *)xfer->xfer_buf;
+	req->valid_params = params->valid_params;
+	req->nav_id = params->nav_id;
+	req->index = params->index;
+	req->addr_lo = params->addr_lo;
+	req->addr_hi = params->addr_hi;
+	req->count = params->count;
+	req->mode = params->mode;
+	req->size = params->size;
+	req->order_id = params->order_id;
+	req->virtid = params->virtid;
+	req->asel = params->asel;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "RM_RA:Mbox config send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+	dev_dbg(dev, "RM_RA:config ring %u ret:%d\n", params->index, ret);
+	return ret;
+}
+
+/**
  * ti_sci_cmd_rm_psil_pair() - Pair PSI-L source to destination thread
  * @handle:	Pointer to TI SCI handle.
  * @nav_id:	Device ID of Navigator Subsystem which should be used for
@@ -2847,6 +2909,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 	iops->free_event_map = ti_sci_cmd_free_event_map;
 
 	rops->config = ti_sci_cmd_ring_config;
+	rops->set_cfg = ti_sci_cmd_rm_ring_cfg;
 
 	psilops->pair = ti_sci_cmd_rm_psil_pair;
 	psilops->unpair = ti_sci_cmd_rm_psil_unpair;
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index 1cdf918be861..ef3a8214d002 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -659,6 +659,8 @@ struct ti_sci_msg_req_manage_irq {
  *	3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode
  *	4 - Valid bit for @tisci_msg_rm_ring_cfg_req size
  *	5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id
+ *	6 - Valid bit for @tisci_msg_rm_ring_cfg_req virtid
+ *	7 - Valid bit for @tisci_msg_rm_ring_cfg_req ASEL
  * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
  * @index: ring index to be configured.
  * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
@@ -672,6 +674,9 @@ struct ti_sci_msg_req_manage_irq {
  *	the formula (log2(size_bytes) - 2), where size_bytes cannot be
  *	greater than 256.
  * @order_id: Specifies the ring's bus order ID.
+ * @virtid: Ring virt ID value
+ * @asel: Ring ASEL (address select) value to be set into the ASEL field of the
+ *	ring's RING_BA_HI register.
  */
 struct ti_sci_msg_rm_ring_cfg_req {
 	struct ti_sci_msg_hdr hdr;
@@ -684,6 +689,8 @@ struct ti_sci_msg_rm_ring_cfg_req {
 	u8 mode;
 	u8 size;
 	u8 order_id;
+	u16 virtid;
+	u8 asel;
 } __packed;
 
 /**