diff options
| author | Milo Kim <milo.kim@ti.com> | 2013-12-06 11:18:42 +0900 |
|---|---|---|
| committer | Lee Jones <lee.jones@linaro.org> | 2014-01-21 08:27:57 +0000 |
| commit | 0cc59b9d98d554168915b3765a14e8b4ad75918c (patch) | |
| tree | 7939471290934e3482ecc8bc5a679e455159c205 /drivers/gpio/Makefile | |
| parent | 25a7a6f4a200e2eb04d87fb1c06130b1a85aa688 (diff) | |
| download | linux-0cc59b9d98d554168915b3765a14e8b4ad75918c.tar.gz linux-0cc59b9d98d554168915b3765a14e8b4ad75918c.tar.bz2 linux-0cc59b9d98d554168915b3765a14e8b4ad75918c.zip | |
gpio: add LP3943 I2C GPIO expander driver
This is one of LP3943 MFD driver.
LP3943 is configurable as a GPIO expander, up to 16 GPIOs.
* Application note: how to configure LP3943 as a GPIO expander
http://www.ti.com/lit/an/snva287a/snva287a.pdf
* Supported GPIO controller operations
request, free, direction_input, direction_output, get and set
* GPIO direction register not supported
LP3943 doesn't have the GPIO direction register. It only provides input and
output status registers.
So, private data for the direction should be handled manually.
This variable is updated whenever the direction is changed and
used in 'get' operation.
* Pin assignment
A driver data, 'pin_used' is checked when a GPIO is requested.
If the GPIO is already assigned, then returns as failure.
If the GPIO is available, 'pin_used' is set.
When the GPIO is not used anymore, then it is cleared.
It is defined as unsigned long type for atomic bit operation APIs,
but only LSB 16bits are used because LP3943 has 16 outputs.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers/gpio/Makefile')
| -rw-r--r-- | drivers/gpio/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 7971e36b8b12..95927b61c201 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o +obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o |