diff options
author | Nicolas Saenz Julienne <nicolassaenzj@gmail.com> | 2016-01-30 17:06:44 +0000 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2016-02-11 12:25:16 +0100 |
commit | c366c76a2c41d0c545e51b53056b21515db32e77 (patch) | |
tree | 9fa04f3eb2a7eabdccc0c24e1b891b1458457b15 /drivers/gpio/gpio-tps65218.c | |
parent | b866526d0cfe0c5b906f9f038f3f550efe30c9d0 (diff) | |
download | linux-c366c76a2c41d0c545e51b53056b21515db32e77.tar.gz linux-c366c76a2c41d0c545e51b53056b21515db32e77.tar.bz2 linux-c366c76a2c41d0c545e51b53056b21515db32e77.zip |
gpio: add tps65218 gpio
Driver for the GPIO block found in ti's tps65218 pmics.
The device has two GPIOs and one GPO pin which can be configured as follows:
GPIO1:
-general-purpose, open-drain output controlled by GPO1 user bit and/or
sequencer
-DDR3 reset input signal from SOC. Signal is either latched or
passed-trough to GPO2 pin. See below for details.
GPO2:
-general-purpose output controlled by GPO2 user bit
-DDR3 reset output signal. Signal is controlled by GPIO1 and PGOOD.
See below for details.
-Output buffer can be configured as open-drain or push-pull.
GPIO3:
-general-purpose, open-drain output controlled by GPO3 user bit and/or
sequencer
-reset input-signal for DCDC1 and DCDC2.
The input configurations are not meant to be used by the user so the driver
only offers GPOs.
v2: Added request routine that evaluates the fw config flags and removed module
owner
v3: Added .direction_input() routine, and took care of all Linus Walleij
suggestions (clamp to bool, use proper include)
Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio/gpio-tps65218.c')
-rw-r--r-- | drivers/gpio/gpio-tps65218.c | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-tps65218.c b/drivers/gpio/gpio-tps65218.c new file mode 100644 index 000000000000..7b02f7be9bc9 --- /dev/null +++ b/drivers/gpio/gpio-tps65218.c @@ -0,0 +1,223 @@ +/* + * Copyright 2015 Verifone Int. + * + * Author: Nicolas Saenz Julienne <nicolassaenzj@gmail.com> + * + * This program is free software; you can redistribute it and/or modify i t + * under the terms of the GNU General Public License as published by th e + * Free Software Foundation; either version 2 of the License, or (at you r + * option) any later version. + * + * This driver is based on the gpio-tps65912 implementation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/mfd/tps65218.h> +#include "gpiolib.h" + +struct tps65218_gpio { + struct tps65218 *tps65218; + struct gpio_chip gpio_chip; +}; + +static int tps65218_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc); + struct tps65218 *tps65218 = tps65218_gpio->tps65218; + unsigned int val; + int ret; + + ret = tps65218_reg_read(tps65218, TPS65218_REG_ENABLE2, &val); + if (ret) + return ret; + + return !!(val & (TPS65218_ENABLE2_GPIO1 << offset)); +} + +static void tps65218_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc); + struct tps65218 *tps65218 = tps65218_gpio->tps65218; + + if (value) + tps65218_set_bits(tps65218, TPS65218_REG_ENABLE2, + TPS65218_ENABLE2_GPIO1 << offset, + TPS65218_ENABLE2_GPIO1 << offset, + TPS65218_PROTECT_L1); + else + tps65218_clear_bits(tps65218, TPS65218_REG_ENABLE2, + TPS65218_ENABLE2_GPIO1 << offset, + TPS65218_PROTECT_L1); +} + +static int tps65218_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + /* Only drives GPOs */ + return 0; +} + +static int tps65218_gpio_input(struct gpio_chip *gc, unsigned offset) +{ + return -EPERM; +} + +static int tps65218_gpio_request(struct gpio_chip *gc, unsigned offset) +{ + struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc); + struct tps65218 *tps65218 = tps65218_gpio->tps65218; + unsigned long flags = gc->desc[offset].flags; + int ret; + + if (flags & FLAG_OPEN_SOURCE) { + dev_err(gc->parent, "can't work as open source\n"); + return -EINVAL; + } + + switch (offset) { + case 0: + if (!(flags & FLAG_OPEN_DRAIN)) { + dev_err(gc->parent, "GPO1 works only as open drain\n"); + return -EINVAL; + } + + /* Disable sequencer for GPO1 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7, + TPS65218_SEQ7_GPO1_SEQ_MASK, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + /* Setup GPO1 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1, + TPS65218_CONFIG1_IO1_SEL, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + break; + case 1: + /* GP02 is push-pull by default, can be set as open drain. */ + if (flags & FLAG_OPEN_DRAIN) { + ret = tps65218_clear_bits(tps65218, + TPS65218_REG_CONFIG1, + TPS65218_CONFIG1_GPO2_BUF, + TPS65218_PROTECT_L1); + if (ret) + return ret; + } + + /* Setup GPO2 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1, + TPS65218_CONFIG1_IO1_SEL, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + break; + + case 2: + if (!(flags & FLAG_OPEN_DRAIN)) { + dev_err(gc->parent, "GPO3 works only as open drain\n"); + return -EINVAL; + } + + /* Disable sequencer for GPO3 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7, + TPS65218_SEQ7_GPO3_SEQ_MASK, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + /* Setup GPO3 */ + ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG2, + TPS65218_CONFIG2_DC12_RST, + TPS65218_PROTECT_L1); + if (ret) + return ret; + + break; + default: + return -EINVAL; + } + + return 0; +} + +static struct gpio_chip template_chip = { + .label = "gpio-tps65218", + .owner = THIS_MODULE, + .request = tps65218_gpio_request, + .direction_output = tps65218_gpio_output, + .direction_input = tps65218_gpio_input, + .get = tps65218_gpio_get, + .set = tps65218_gpio_set, + .can_sleep = true, + .ngpio = 3, + .base = -1, +}; + +static int tps65218_gpio_probe(struct platform_device *pdev) +{ + struct tps65218 *tps65218 = dev_get_drvdata(pdev->dev.parent); + struct tps65218_gpio *tps65218_gpio; + int ret; + + tps65218_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps65218_gpio), + GFP_KERNEL); + if (!tps65218_gpio) + return -ENOMEM; + + tps65218_gpio->tps65218 = tps65218; + tps65218_gpio->gpio_chip = template_chip; + tps65218_gpio->gpio_chip.parent = &pdev->dev; +#ifdef CONFIG_OF_GPIO + tps65218_gpio->gpio_chip.of_node = pdev->dev.of_node; +#endif + + ret = gpiochip_add_data(&tps65218_gpio->gpio_chip, tps65218_gpio); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, tps65218_gpio); + + return ret; +} + +static int tps65218_gpio_remove(struct platform_device *pdev) +{ + struct tps65218_gpio *tps65218_gpio = platform_get_drvdata(pdev); + + gpiochip_remove(&tps65218_gpio->gpio_chip); + + return 0; +} + +static const struct of_device_id tps65218_dt_match[] = { + { .compatible = "ti,tps65218-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, tps65218_dt_match); + +static struct platform_driver tps65218_gpio_driver = { + .driver = { + .name = "tps65218-gpio", + .of_match_table = of_match_ptr(tps65218_dt_match) + }, + .probe = tps65218_gpio_probe, + .remove = tps65218_gpio_remove, +}; + +module_platform_driver(tps65218_gpio_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>"); +MODULE_DESCRIPTION("GPO interface for TPS65218 PMICs"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:tps65218-gpio"); |