diff options
author | Grygorii Strashko <grygorii.strashko@ti.com> | 2017-10-03 11:17:05 -0500 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2017-10-07 13:17:07 +0200 |
commit | 80ac93c274411a55ae731f259f75e4ca5e499e8b (patch) | |
tree | 73fce39c76d4636fc20486f94d797c87d58c0d6e /drivers/gpio | |
parent | e4b2ae7a8a11c5d4e0a6e21ba65d4b487a15d3d8 (diff) | |
download | linux-80ac93c274411a55ae731f259f75e4ca5e499e8b.tar.gz linux-80ac93c274411a55ae731f259f75e4ca5e499e8b.tar.bz2 linux-80ac93c274411a55ae731f259f75e4ca5e499e8b.zip |
gpio: omap: Fix lost edge interrupts
Now acking of edge irqs happens the following way:
- omap_gpio_irq_handler
- "isr" = read irq status
- omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
^ clear edge status, so irq can be accepted
- loop while "isr"
generic_handle_irq()
- handle_edge_irq()
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- omap_gpio_ack_irq()
it might be that at this moment edge IRQ was triggered again and it will be
cleared and IRQ will be lost.
Use handle_simple_irq and clear edge interrupts early without disabling them in
omap_gpio_irq_handler to avoid loosing interrupts.
[1] https://marc.info/?l=linux-omap&m=149004465313534&w=2
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/gpio-omap.c | 22 |
1 files changed, 13 insertions, 9 deletions
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 22d7d4838265..3233b72b6828 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -518,7 +518,13 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type) if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) irq_set_handler_locked(d, handle_level_irq); else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - irq_set_handler_locked(d, handle_edge_irq); + /* + * Edge IRQs are already cleared/acked in irq_handler and + * not need to be masked, as result handle_edge_irq() + * logic is excessed here and may cause lose of interrupts. + * So just use handle_simple_irq. + */ + irq_set_handler_locked(d, handle_simple_irq); return 0; @@ -678,7 +684,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank) { void __iomem *isr_reg = NULL; - u32 isr; + u32 enabled, isr, level_mask; unsigned int bit; struct gpio_bank *bank = gpiobank; unsigned long wa_lock_flags; @@ -691,23 +697,21 @@ static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank) pm_runtime_get_sync(bank->chip.parent); while (1) { - u32 isr_saved, level_mask = 0; - u32 enabled; - raw_spin_lock_irqsave(&bank->lock, lock_flags); enabled = omap_get_gpio_irqbank_mask(bank); - isr_saved = isr = readl_relaxed(isr_reg) & enabled; + isr = readl_relaxed(isr_reg) & enabled; if (bank->level_mask) level_mask = bank->level_mask & enabled; + else + level_mask = 0; /* clear edge sensitive interrupts before handler(s) are called so that we don't miss any interrupt occurred while executing them */ - omap_disable_gpio_irqbank(bank, isr_saved & ~level_mask); - omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask); - omap_enable_gpio_irqbank(bank, isr_saved & ~level_mask); + if (isr & ~level_mask) + omap_clear_gpio_irqbank(bank, isr & ~level_mask); raw_spin_unlock_irqrestore(&bank->lock, lock_flags); |