Merge branch 'for-5.13/thrustmaster' into for-linus

- support for initialization of some newer Thrustmaster wheels from
  Dario Pagani

4 files changed, 380 insertions, 4 deletions

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index f042c7466930..4bf263c2d61a 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1053,10 +1053,11 @@ config HID_THINGM
 
 config HID_THRUSTMASTER
 	tristate "ThrustMaster devices support"
-	depends on HID
+	depends on USB_HID
 	help
-	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
-	  a THRUSTMASTER Ferrari GT Rumble Wheel.
+	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
+	  a THRUSTMASTER Ferrari GT Rumble Wheel or Thrustmaster FFB
+	  Wheel (T150RS, T300RS, T300 Ferrari Alcantara Edition, T500RS).
 
 config THRUSTMASTER_FF
 	bool "ThrustMaster devices force feedback support"
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index a664a495fc44..193431ec4db8 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -113,7 +113,8 @@ obj-$(CONFIG_HID_STEAM)		+= hid-steam.o
 obj-$(CONFIG_HID_STEELSERIES)	+= hid-steelseries.o
 obj-$(CONFIG_HID_SUNPLUS)	+= hid-sunplus.o
 obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
-obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
+obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o hid-thrustmaster.o
+obj-$(CONFIG_HID_TMINIT)	+= hid-tminit.o
 obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 3816be700f49..3dd6f15f2a67 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -659,6 +659,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
 #endif
+#if IS_ENABLED(CONFIG_HID_TMINIT)
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65d) },
+#endif
 #if IS_ENABLED(CONFIG_HID_TIVO)
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) },
diff --git a/drivers/hid/hid-thrustmaster.c b/drivers/hid/hid-thrustmaster.c
new file mode 100644
index 000000000000..2e452c6e8ef4
--- /dev/null
+++ b/drivers/hid/hid-thrustmaster.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * When connected to the machine, the Thrustmaster wheels appear as
+ * a «generic» hid gamepad called "Thrustmaster FFB Wheel".
+ *
+ * When in this mode not every functionality of the wheel, like the force feedback,
+ * are available. To enable all functionalities of a Thrustmaster wheel we have to send
+ * to it a specific USB CONTROL request with a code different for each wheel.
+ *
+ * This driver tries to understand which model of Thrustmaster wheel the generic
+ * "Thrustmaster FFB Wheel" really is and then sends the appropriate control code.
+ *
+ * Copyright (c) 2020-2021 Dario Pagani <dario.pagani.146+linuxk@gmail.com>
+ * Copyright (c) 2020-2021 Kim Kuparinen <kimi.h.kuparinen@gmail.com>
+ */
+#include <linux/hid.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+/*
+ * These interrupts are used to prevent a nasty crash when initializing the
+ * T300RS. Used in thrustmaster_interrupts().
+ */
+static const u8 setup_0[] = { 0x42, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+static const u8 setup_1[] = { 0x0a, 0x04, 0x90, 0x03, 0x00, 0x00, 0x00, 0x00 };
+static const u8 setup_2[] = { 0x0a, 0x04, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00 };
+static const u8 setup_3[] = { 0x0a, 0x04, 0x12, 0x10, 0x00, 0x00, 0x00, 0x00 };
+static const u8 setup_4[] = { 0x0a, 0x04, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00 };
+static const u8 *const setup_arr[] = { setup_0, setup_1, setup_2, setup_3, setup_4 };
+static const unsigned int setup_arr_sizes[] = {
+	ARRAY_SIZE(setup_0),
+	ARRAY_SIZE(setup_1),
+	ARRAY_SIZE(setup_2),
+	ARRAY_SIZE(setup_3),
+	ARRAY_SIZE(setup_4)
+};
+/*
+ * This struct contains for each type of
+ * Thrustmaster wheel
+ *
+ * Note: The values are stored in the CPU
+ * endianness, the USB protocols always use
+ * little endian; the macro cpu_to_le[BIT]()
+ * must be used when preparing USB packets
+ * and vice-versa
+ */
+struct tm_wheel_info {
+	uint16_t wheel_type;
+
+	/*
+	 * See when the USB control out packet is prepared...
+	 * @TODO The TMX seems to require multiple control codes to switch.
+	 */
+	uint16_t switch_value;
+
+	char const *const wheel_name;
+};
+
+/*
+ * Known wheels.
+ * Note: TMX does not work as it requires 2 control packets
+ */
+static const struct tm_wheel_info tm_wheels_infos[] = {
+	{0x0306, 0x0006, "Thrustmaster T150RS"},
+	{0x0206, 0x0005, "Thrustmaster T300RS"},
+	{0x0204, 0x0005, "Thrustmaster T300 Ferrari Alcantara Edition"},
+	{0x0002, 0x0002, "Thrustmaster T500RS"}
+	//{0x0407, 0x0001, "Thrustmaster TMX"}
+};
+
+static const uint8_t tm_wheels_infos_length = 4;
+
+/*
+ * This structs contains (in little endian) the response data
+ * of the wheel to the request 73
+ *
+ * A sufficient research to understand what each field does is not
+ * beign conducted yet. The position and meaning of fields are a
+ * just a very optimistic guess based on instinct....
+ */
+struct __packed tm_wheel_response
+{
+	/*
+	 * Seems to be the type of packet
+	 * - 0x0049 if is data.a (15 bytes)
+	 * - 0x0047 if is data.b (7 bytes)
+	 */
+	uint16_t type;
+
+	union {
+		struct __packed {
+			uint16_t field0;
+			uint16_t field1;
+			/*
+			 * Seems to be the model code of the wheel
+			 * Read table thrustmaster_wheels to values
+			 */
+			uint16_t model;
+
+			uint16_t field2;
+			uint16_t field3;
+			uint16_t field4;
+			uint16_t field5;
+		} a;
+		struct __packed {
+			uint16_t field0;
+			uint16_t field1;
+			uint16_t model;
+		} b;
+	} data;
+};
+
+struct tm_wheel {
+	struct usb_device *usb_dev;
+	struct urb *urb;
+
+	struct usb_ctrlrequest *model_request;
+	struct tm_wheel_response *response;
+
+	struct usb_ctrlrequest *change_request;
+};
+
+/* The control packet to send to wheel */
+static const struct usb_ctrlrequest model_request = {
+	.bRequestType = 0xc1,
+	.bRequest = 73,
+	.wValue = 0,
+	.wIndex = 0,
+	.wLength = cpu_to_le16(0x0010)
+};
+
+static const struct usb_ctrlrequest change_request = {
+	.bRequestType = 0x41,
+	.bRequest = 83,
+	.wValue = 0, // Will be filled by the driver
+	.wIndex = 0,
+	.wLength = 0
+};
+
+/*
+ * On some setups initializing the T300RS crashes the kernel,
+ * these interrupts fix that particular issue. So far they haven't caused any
+ * adverse effects in other wheels.
+ */
+static void thrustmaster_interrupts(struct hid_device *hdev)
+{
+	int ret, trans, i, b_ep;
+	u8 *send_buf = kmalloc(256, GFP_KERNEL);
+	struct usb_host_endpoint *ep;
+	struct device *dev = &hdev->dev;
+	struct usb_interface *usbif = to_usb_interface(dev->parent);
+	struct usb_device *usbdev = interface_to_usbdev(usbif);
+
+	if (!send_buf) {
+		hid_err(hdev, "failed allocating send buffer\n");
+		return;
+	}
+
+	ep = &usbif->cur_altsetting->endpoint[1];
+	b_ep = ep->desc.bEndpointAddress;
+
+	for (i = 0; i < ARRAY_SIZE(setup_arr); ++i) {
+		memcpy(send_buf, setup_arr[i], setup_arr_sizes[i]);
+
+		ret = usb_interrupt_msg(usbdev,
+			usb_sndintpipe(usbdev, b_ep),
+			send_buf,
+			setup_arr_sizes[i],
+			&trans,
+			USB_CTRL_SET_TIMEOUT);
+
+		if (ret) {
+			hid_err(hdev, "setup data couldn't be sent\n");
+			return;
+		}
+	}
+
+	kfree(send_buf);
+}
+
+static void thrustmaster_change_handler(struct urb *urb)
+{
+	struct hid_device *hdev = urb->context;
+
+	// The wheel seems to kill himself before answering the host and therefore is violating the USB protocol...
+	if (urb->status == 0 || urb->status == -EPROTO || urb->status == -EPIPE)
+		hid_info(hdev, "Success?! The wheel should have been initialized!\n");
+	else
+		hid_warn(hdev, "URB to change wheel mode seems to have failed with error %d\n", urb->status);
+}
+
+/*
+ * Called by the USB subsystem when the wheel responses to our request
+ * to get [what it seems to be] the wheel's model.
+ *
+ * If the model id is recognized then we send an opportune USB CONTROL REQUEST
+ * to switch the wheel to its full capabilities
+ */
+static void thrustmaster_model_handler(struct urb *urb)
+{
+	struct hid_device *hdev = urb->context;
+	struct tm_wheel *tm_wheel = hid_get_drvdata(hdev);
+	uint16_t model = 0;
+	int i, ret;
+	const struct tm_wheel_info *twi = 0;
+
+	if (urb->status) {
+		hid_err(hdev, "URB to get model id failed with error %d\n", urb->status);
+		return;
+	}
+
+	if (tm_wheel->response->type == cpu_to_le16(0x49))
+		model = le16_to_cpu(tm_wheel->response->data.a.model);
+	else if (tm_wheel->response->type == cpu_to_le16(0x47))
+		model = le16_to_cpu(tm_wheel->response->data.b.model);
+	else {
+		hid_err(hdev, "Unknown packet type 0x%x, unable to proceed further with wheel init\n", tm_wheel->response->type);
+		return;
+	}
+
+	for (i = 0; i < tm_wheels_infos_length && !twi; i++)
+		if (tm_wheels_infos[i].wheel_type == model)
+			twi = tm_wheels_infos + i;
+
+	if (twi)
+		hid_info(hdev, "Wheel with model id 0x%x is a %s\n", model, twi->wheel_name);
+	else {
+		hid_err(hdev, "Unknown wheel's model id 0x%x, unable to proceed further with wheel init\n", model);
+		return;
+	}
+
+	tm_wheel->change_request->wValue = cpu_to_le16(twi->switch_value);
+	usb_fill_control_urb(
+		tm_wheel->urb,
+		tm_wheel->usb_dev,
+		usb_sndctrlpipe(tm_wheel->usb_dev, 0),
+		(char *)tm_wheel->change_request,
+		0, 0, // We do not expect any response from the wheel
+		thrustmaster_change_handler,
+		hdev
+	);
+
+	ret = usb_submit_urb(tm_wheel->urb, GFP_ATOMIC);
+	if (ret)
+		hid_err(hdev, "Error %d while submitting the change URB. I am unable to initialize this wheel...\n", ret);
+}
+
+static void thrustmaster_remove(struct hid_device *hdev)
+{
+	struct tm_wheel *tm_wheel = hid_get_drvdata(hdev);
+
+	usb_kill_urb(tm_wheel->urb);
+
+	kfree(tm_wheel->response);
+	kfree(tm_wheel->model_request);
+	usb_free_urb(tm_wheel->urb);
+	kfree(tm_wheel);
+
+	hid_hw_stop(hdev);
+}
+
+/*
+ * Function called by HID when a hid Thrustmaster FFB wheel is connected to the host.
+ * This function starts the hid dev, tries to allocate the tm_wheel data structure and
+ * finally send an USB CONTROL REQUEST to the wheel to get [what it seems to be] its
+ * model type.
+ */
+static int thrustmaster_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret = 0;
+	struct tm_wheel *tm_wheel = 0;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed with error %d\n", ret);
+		goto error0;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		hid_err(hdev, "hw start failed with error %d\n", ret);
+		goto error0;
+	}
+
+	// Now we allocate the tm_wheel
+	tm_wheel = kzalloc(sizeof(struct tm_wheel), GFP_KERNEL);
+	if (!tm_wheel) {
+		ret = -ENOMEM;
+		goto error1;
+	}
+
+	tm_wheel->urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!tm_wheel->urb) {
+		ret = -ENOMEM;
+		goto error2;
+	}
+
+	tm_wheel->model_request = kmemdup(&model_request,
+					  sizeof(struct usb_ctrlrequest),
+					  GFP_KERNEL);
+	if (!tm_wheel->model_request) {
+		ret = -ENOMEM;
+		goto error3;
+	}
+
+	tm_wheel->response = kzalloc(sizeof(struct tm_wheel_response), GFP_KERNEL);
+	if (!tm_wheel->response) {
+		ret = -ENOMEM;
+		goto error4;
+	}
+
+	tm_wheel->change_request = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	if (!tm_wheel->model_request) {
+		ret = -ENOMEM;
+		goto error5;
+	}
+	memcpy(tm_wheel->change_request, &change_request, sizeof(struct usb_ctrlrequest));
+
+	tm_wheel->usb_dev = interface_to_usbdev(to_usb_interface(hdev->dev.parent));
+	hid_set_drvdata(hdev, tm_wheel);
+
+	thrustmaster_interrupts(hdev);
+
+	usb_fill_control_urb(
+		tm_wheel->urb,
+		tm_wheel->usb_dev,
+		usb_rcvctrlpipe(tm_wheel->usb_dev, 0),
+		(char *)tm_wheel->model_request,
+		tm_wheel->response,
+		sizeof(struct tm_wheel_response),
+		thrustmaster_model_handler,
+		hdev
+	);
+
+	ret = usb_submit_urb(tm_wheel->urb, GFP_ATOMIC);
+	if (ret)
+		hid_err(hdev, "Error %d while submitting the URB. I am unable to initialize this wheel...\n", ret);
+
+	return ret;
+
+error5: kfree(tm_wheel->response);
+error4: kfree(tm_wheel->model_request);
+error3: usb_free_urb(tm_wheel->urb);
+error2: kfree(tm_wheel);
+error1: hid_hw_stop(hdev);
+error0:
+	return ret;
+}
+
+static const struct hid_device_id thrustmaster_devices[] = {
+	{ HID_USB_DEVICE(0x044f, 0xb65d)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(hid, thrustmaster_devices);
+
+static struct hid_driver thrustmaster_driver = {
+	.name = "hid-thrustmaster",
+	.id_table = thrustmaster_devices,
+	.probe = thrustmaster_probe,
+	.remove = thrustmaster_remove,
+};
+
+module_hid_driver(thrustmaster_driver);
+
+MODULE_AUTHOR("Dario Pagani <dario.pagani.146+linuxk@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver to initialize some steering wheel joysticks from Thrustmaster");
+