[PATCH] I2C: Move hwmon drivers (2/3)

Part 2: Move the driver files themselves.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

34 files changed, 25444 insertions, 0 deletions

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
new file mode 100644
index 000000000000..d2c774c32f45
--- /dev/null
+++ b/drivers/hwmon/adm1021.c
@@ -0,0 +1,402 @@
+/*
+    adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
+					0x29, 0x2a, 0x2b,
+					0x4c, 0x4d, 0x4e, 
+					I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066);
+
+/* adm1021 constants specified below */
+
+/* The adm1021 registers */
+/* Read-only */
+#define ADM1021_REG_TEMP		0x00
+#define ADM1021_REG_REMOTE_TEMP		0x01
+#define ADM1021_REG_STATUS		0x02
+#define ADM1021_REG_MAN_ID		0x0FE	/* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/
+#define ADM1021_REG_DEV_ID		0x0FF	/* ADM1021 = 0x0X, ADM1023 = 0x3X */
+#define ADM1021_REG_DIE_CODE		0x0FF	/* MAX1617A */
+/* These use different addresses for reading/writing */
+#define ADM1021_REG_CONFIG_R		0x03
+#define ADM1021_REG_CONFIG_W		0x09
+#define ADM1021_REG_CONV_RATE_R		0x04
+#define ADM1021_REG_CONV_RATE_W		0x0A
+/* These are for the ADM1023's additional precision on the remote temp sensor */
+#define ADM1021_REG_REM_TEMP_PREC	0x010
+#define ADM1021_REG_REM_OFFSET		0x011
+#define ADM1021_REG_REM_OFFSET_PREC	0x012
+#define ADM1021_REG_REM_TOS_PREC	0x013
+#define ADM1021_REG_REM_THYST_PREC	0x014
+/* limits */
+#define ADM1021_REG_TOS_R		0x05
+#define ADM1021_REG_TOS_W		0x0B
+#define ADM1021_REG_REMOTE_TOS_R	0x07
+#define ADM1021_REG_REMOTE_TOS_W	0x0D
+#define ADM1021_REG_THYST_R		0x06
+#define ADM1021_REG_THYST_W		0x0C
+#define ADM1021_REG_REMOTE_THYST_R	0x08
+#define ADM1021_REG_REMOTE_THYST_W	0x0E
+/* write-only */
+#define ADM1021_REG_ONESHOT		0x0F
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+/* Conversions  note: 1021 uses normal integer signed-byte format*/
+#define TEMP_FROM_REG(val)	(val > 127 ? (val-256)*1000 : val*1000)
+#define TEMP_TO_REG(val)	(SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255))
+
+/* Initial values */
+
+/* Note: Even though I left the low and high limits named os and hyst, 
+they don't quite work like a thermostat the way the LM75 does.  I.e., 
+a lower temp than THYST actually triggers an alarm instead of 
+clearing it.  Weird, ey?   --Phil  */
+
+/* Each client has this additional data */
+struct adm1021_data {
+	struct i2c_client client;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8	temp_max;	/* Register values */
+	u8	temp_hyst;
+	u8	temp_input;
+	u8	remote_temp_max;
+	u8	remote_temp_hyst;
+	u8	remote_temp_input;
+	u8	alarms;
+        /* Special values for ADM1023 only */
+	u8	remote_temp_prec;
+	u8	remote_temp_os_prec;
+	u8	remote_temp_hyst_prec;
+	u8	remote_temp_offset;
+	u8	remote_temp_offset_prec;
+};
+
+static int adm1021_attach_adapter(struct i2c_adapter *adapter);
+static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind);
+static void adm1021_init_client(struct i2c_client *client);
+static int adm1021_detach_client(struct i2c_client *client);
+static int adm1021_read_value(struct i2c_client *client, u8 reg);
+static int adm1021_write_value(struct i2c_client *client, u8 reg,
+			       u16 value);
+static struct adm1021_data *adm1021_update_device(struct device *dev);
+
+/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
+static int read_only = 0;
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver adm1021_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "adm1021",
+	.id		= I2C_DRIVERID_ADM1021,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= adm1021_attach_adapter,
+	.detach_client	= adm1021_detach_client,
+};
+
+#define show(value)	\
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	struct adm1021_data *data = adm1021_update_device(dev);		\
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value));	\
+}
+show(temp_max);
+show(temp_hyst);
+show(temp_input);
+show(remote_temp_max);
+show(remote_temp_hyst);
+show(remote_temp_input);
+
+#define show2(value)	\
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	struct adm1021_data *data = adm1021_update_device(dev);		\
+	return sprintf(buf, "%d\n", data->value);			\
+}
+show2(alarms);
+
+#define set(value, reg)	\
+static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)	\
+{								\
+	struct i2c_client *client = to_i2c_client(dev);		\
+	struct adm1021_data *data = i2c_get_clientdata(client);	\
+	int temp = simple_strtoul(buf, NULL, 10);		\
+								\
+	down(&data->update_lock);				\
+	data->value = TEMP_TO_REG(temp);			\
+	adm1021_write_value(client, reg, data->value);		\
+	up(&data->update_lock);					\
+	return count;						\
+}
+set(temp_max, ADM1021_REG_TOS_W);
+set(temp_hyst, ADM1021_REG_THYST_W);
+set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W);
+set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W);
+
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max);
+static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst);
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+
+static int adm1021_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, adm1021_detect);
+}
+
+static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct adm1021_data *data;
+	int err = 0;
+	const char *type_name = "";
+
+	/* Make sure we aren't probing the ISA bus!! This is just a safety check
+	   at this moment; i2c_detect really won't call us. */
+#ifdef DEBUG
+	if (i2c_is_isa_adapter(adapter)) {
+		dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n");
+		return 0;
+	}
+#endif
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto error0;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access adm1021_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto error0;
+	}
+	memset(data, 0, sizeof(struct adm1021_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1021_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+	if (kind < 0) {
+		if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00
+		 || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00
+		 || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) {
+			err = -ENODEV;
+			goto error1;
+		}
+	}
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID);
+		if (i == 0x41)
+			if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030)
+				kind = adm1023;
+			else
+				kind = adm1021;
+		else if (i == 0x49)
+			kind = thmc10;
+		else if (i == 0x23)
+			kind = gl523sm;
+		else if ((i == 0x4d) &&
+			 (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01))
+			kind = max1617a;
+		else if (i == 0x54)
+			kind = mc1066;
+		/* LM84 Mfr ID in a different place, and it has more unused bits */
+		else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00
+		      && (kind == 0 /* skip extra detection */
+		       || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00
+			&& (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00)))
+			kind = lm84;
+		else
+			kind = max1617;
+	}
+
+	if (kind == max1617) {
+		type_name = "max1617";
+	} else if (kind == max1617a) {
+		type_name = "max1617a";
+	} else if (kind == adm1021) {
+		type_name = "adm1021";
+	} else if (kind == adm1023) {
+		type_name = "adm1023";
+	} else if (kind == thmc10) {
+		type_name = "thmc10";
+	} else if (kind == lm84) {
+		type_name = "lm84";
+	} else if (kind == gl523sm) {
+		type_name = "gl523sm";
+	} else if (kind == mc1066) {
+		type_name = "mc1066";
+	}
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto error1;
+
+	/* Initialize the ADM1021 chip */
+	if (kind != lm84)
+		adm1021_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+error1:
+	kfree(data);
+error0:
+	return err;
+}
+
+static void adm1021_init_client(struct i2c_client *client)
+{
+	/* Enable ADC and disable suspend mode */
+	adm1021_write_value(client, ADM1021_REG_CONFIG_W,
+		adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF);
+	/* Set Conversion rate to 1/sec (this can be tinkered with) */
+	adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04);
+}
+
+static int adm1021_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+/* All registers are byte-sized */
+static int adm1021_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (!read_only)
+		return i2c_smbus_write_byte_data(client, reg, value);
+	return 0;
+}
+
+static struct adm1021_data *adm1021_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1021_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(&client->dev, "Starting adm1021 update\n");
+
+		data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP);
+		data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R);
+		data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R);
+		data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP);
+		data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R);
+		data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R);
+		data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c;
+		if (data->type == adm1023) {
+			data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC);
+			data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC);
+			data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC);
+			data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET);
+			data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC);
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_adm1021_init(void)
+{
+	return i2c_add_driver(&adm1021_driver);
+}
+
+static void __exit sensors_adm1021_exit(void)
+{
+	i2c_del_driver(&adm1021_driver);
+}
+
+MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and "
+		"Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("adm1021 driver");
+MODULE_LICENSE("GPL");
+
+module_param(read_only, bool, 0);
+MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
+
+module_init(sensors_adm1021_init)
+module_exit(sensors_adm1021_exit)
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
new file mode 100644
index 000000000000..e452d0daf906
--- /dev/null
+++ b/drivers/hwmon/adm1025.c
@@ -0,0 +1,577 @@
+/*
+ * adm1025.c
+ *
+ * Copyright (C) 2000       Chen-Yuan Wu <gwu@esoft.com>
+ * Copyright (C) 2003-2004  Jean Delvare <khali@linux-fr.org>
+ *
+ * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
+ * voltages (including its own power source) and up to two temperatures
+ * (its own plus up to one external one). Voltages are scaled internally
+ * (which is not the common way) with ratios such that the nominal value
+ * of each voltage correspond to a register value of 192 (which means a
+ * resolution of about 0.5% of the nominal value). Temperature values are
+ * reported with a 1 deg resolution and a 3 deg accuracy. Complete
+ * datasheet can be obtained from Analog's website at:
+ *   http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
+ *
+ * This driver also supports the ADM1025A, which differs from the ADM1025
+ * only in that it has "open-drain VID inputs while the ADM1025 has
+ * on-chip 100k pull-ups on the VID inputs". It doesn't make any
+ * difference for us.
+ *
+ * This driver also supports the NE1619, a sensor chip made by Philips.
+ * That chip is similar to the ADM1025A, with a few differences. The only
+ * difference that matters to us is that the NE1619 has only two possible
+ * addresses while the ADM1025A has a third one. Complete datasheet can be
+ * obtained from Philips's website at:
+ *   http://www.semiconductors.philips.com/pip/NE1619DS.html
+ *
+ * Since the ADM1025 was the first chipset supported by this driver, most
+ * comments will refer to this chipset, but are actually general and
+ * concern all supported chipsets, unless mentioned otherwise.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/*
+ * Addresses to scan
+ * ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e.
+ * NE1619 has two possible addresses: 0x2c and 0x2d.
+ */
+
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_2(adm1025, ne1619);
+
+/*
+ * The ADM1025 registers
+ */
+
+#define ADM1025_REG_MAN_ID		0x3E
+#define ADM1025_REG_CHIP_ID 		0x3F
+#define ADM1025_REG_CONFIG		0x40
+#define ADM1025_REG_STATUS1		0x41
+#define ADM1025_REG_STATUS2		0x42
+#define ADM1025_REG_IN(nr)		(0x20 + (nr))
+#define ADM1025_REG_IN_MAX(nr)		(0x2B + (nr) * 2)
+#define ADM1025_REG_IN_MIN(nr)		(0x2C + (nr) * 2)
+#define ADM1025_REG_TEMP(nr)		(0x26 + (nr))
+#define ADM1025_REG_TEMP_HIGH(nr)	(0x37 + (nr) * 2)
+#define ADM1025_REG_TEMP_LOW(nr)	(0x38 + (nr) * 2)
+#define ADM1025_REG_VID			0x47
+#define ADM1025_REG_VID4		0x49
+
+/*
+ * Conversions and various macros
+ * The ADM1025 uses signed 8-bit values for temperatures.
+ */
+
+static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
+
+#define IN_FROM_REG(reg,scale)	(((reg) * (scale) + 96) / 192)
+#define IN_TO_REG(val,scale)	((val) <= 0 ? 0 : \
+				 (val) * 192 >= (scale) * 255 ? 255 : \
+				 ((val) * 192 + (scale)/2) / (scale))
+
+#define TEMP_FROM_REG(reg)	((reg) * 1000)
+#define TEMP_TO_REG(val)	((val) <= -127500 ? -128 : \
+				 (val) >= 126500 ? 127 : \
+				 (((val) < 0 ? (val)-500 : (val)+500) / 1000))
+
+/*
+ * Functions declaration
+ */
+
+static int adm1025_attach_adapter(struct i2c_adapter *adapter);
+static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind);
+static void adm1025_init_client(struct i2c_client *client);
+static int adm1025_detach_client(struct i2c_client *client);
+static struct adm1025_data *adm1025_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver adm1025_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "adm1025",
+	.id		= I2C_DRIVERID_ADM1025,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= adm1025_attach_adapter,
+	.detach_client	= adm1025_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct adm1025_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	u8 in[6];		/* register value */
+	u8 in_max[6];		/* register value */
+	u8 in_min[6];		/* register value */
+	s8 temp[2];		/* register value */
+	s8 temp_min[2];		/* register value */
+	s8 temp_max[2];		/* register value */
+	u16 alarms;		/* register values, combined */
+	u8 vid;			/* register values, combined */
+	u8 vrm;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_in(offset) \
+static ssize_t show_in##offset(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
+		       in_scale[offset])); \
+} \
+static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
+		       in_scale[offset])); \
+} \
+static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
+		       in_scale[offset])); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);
+show_in(0);
+show_in(1);
+show_in(2);
+show_in(3);
+show_in(4);
+show_in(5);
+
+#define show_temp(offset) \
+static ssize_t show_temp##offset(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
+} \
+static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
+} \
+static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct adm1025_data *data = adm1025_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
+}\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL);
+show_temp(1);
+show_temp(2);
+
+#define set_in(offset) \
+static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct adm1025_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \
+	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \
+				  data->in_min[offset]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct adm1025_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \
+	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \
+				  data->in_max[offset]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
+	show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
+	show_in##offset##_max, set_in##offset##_max);
+set_in(0);
+set_in(1);
+set_in(2);
+set_in(3);
+set_in(4);
+set_in(5);
+
+#define set_temp(offset) \
+static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct adm1025_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_min[offset-1] = TEMP_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \
+				  data->temp_min[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct adm1025_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_max[offset-1] = TEMP_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \
+				  data->temp_max[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_min, set_temp##offset##_min); \
+static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_max, set_temp##offset##_max);
+set_temp(1);
+set_temp(2);
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1025_data *data = adm1025_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1025_data *data = adm1025_update_device(dev);
+	return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
+}
+/* in1_ref is deprecated in favour of cpu0_vid, remove after 2005-11-11 */
+static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL);
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1025_data *data = adm1025_update_device(dev);
+	return sprintf(buf, "%u\n", data->vrm);
+}
+static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1025_data *data = i2c_get_clientdata(client);
+	data->vrm = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+
+/*
+ * Real code
+ */
+
+static int adm1025_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, adm1025_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct adm1025_data *data;
+	int err = 0;
+	const char *name = "";
+	u8 config;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct adm1025_data));
+
+	/* The common I2C client data is placed right before the
+	   ADM1025-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1025_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+	config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG);
+	if (kind < 0) { /* detection */
+		if ((config & 0x80) != 0x00
+		 || (i2c_smbus_read_byte_data(new_client,
+		     ADM1025_REG_STATUS1) & 0xC0) != 0x00
+		 || (i2c_smbus_read_byte_data(new_client,
+		     ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
+			dev_dbg(&adapter->dev,
+				"ADM1025 detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+		u8 man_id, chip_id;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 ADM1025_REG_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  ADM1025_REG_CHIP_ID);
+		
+		if (man_id == 0x41) { /* Analog Devices */
+			if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
+				kind = adm1025;
+			}
+		} else
+		if (man_id == 0xA1) { /* Philips */
+			if (address != 0x2E
+			 && (chip_id & 0xF0) == 0x20) { /* NE1619 */
+				kind = ne1619;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	if (kind == adm1025) {
+		name = "adm1025";
+	} else if (kind == ne1619) {
+		name = "ne1619";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the ADM1025 chip */
+	adm1025_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	/* in1_ref is deprecated, remove after 2005-11-11 */
+	device_create_file(&new_client->dev, &dev_attr_in1_ref);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+	device_create_file(&new_client->dev, &dev_attr_vrm);
+
+	/* Pin 11 is either in4 (+12V) or VID4 */
+	if (!(config & 0x20)) {
+		device_create_file(&new_client->dev, &dev_attr_in4_input);
+		device_create_file(&new_client->dev, &dev_attr_in4_min);
+		device_create_file(&new_client->dev, &dev_attr_in4_max);
+	}
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void adm1025_init_client(struct i2c_client *client)
+{
+	u8 reg;
+	struct adm1025_data *data = i2c_get_clientdata(client);
+	int i;
+
+	data->vrm = i2c_which_vrm();
+
+	/*
+	 * Set high limits
+	 * Usually we avoid setting limits on driver init, but it happens
+	 * that the ADM1025 comes with stupid default limits (all registers
+	 * set to 0). In case the chip has not gone through any limit
+	 * setting yet, we better set the high limits to the max so that
+	 * no alarm triggers.
+	 */
+	for (i=0; i<6; i++) {
+		reg = i2c_smbus_read_byte_data(client,
+					       ADM1025_REG_IN_MAX(i));
+		if (reg == 0)
+			i2c_smbus_write_byte_data(client,
+						  ADM1025_REG_IN_MAX(i),
+						  0xFF);
+	}
+	for (i=0; i<2; i++) {
+		reg = i2c_smbus_read_byte_data(client,
+					       ADM1025_REG_TEMP_HIGH(i));
+		if (reg == 0)
+			i2c_smbus_write_byte_data(client,
+						  ADM1025_REG_TEMP_HIGH(i),
+						  0x7F);
+	}
+
+	/*
+	 * Start the conversions
+	 */
+	reg = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
+	if (!(reg & 0x01))
+		i2c_smbus_write_byte_data(client, ADM1025_REG_CONFIG,
+					  (reg&0x7E)|0x01);
+}
+
+static int adm1025_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct adm1025_data *adm1025_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1025_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		int i;
+
+		dev_dbg(&client->dev, "Updating data.\n");
+		for (i=0; i<6; i++) {
+			data->in[i] = i2c_smbus_read_byte_data(client,
+				      ADM1025_REG_IN(i));
+			data->in_min[i] = i2c_smbus_read_byte_data(client,
+					  ADM1025_REG_IN_MIN(i));
+			data->in_max[i] = i2c_smbus_read_byte_data(client,
+					  ADM1025_REG_IN_MAX(i));
+		}
+		for (i=0; i<2; i++) {
+			data->temp[i] = i2c_smbus_read_byte_data(client,
+					ADM1025_REG_TEMP(i));
+			data->temp_min[i] = i2c_smbus_read_byte_data(client,
+					    ADM1025_REG_TEMP_LOW(i));
+			data->temp_max[i] = i2c_smbus_read_byte_data(client,
+					    ADM1025_REG_TEMP_HIGH(i));
+		}
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       ADM1025_REG_STATUS1)
+			     | (i2c_smbus_read_byte_data(client,
+				ADM1025_REG_STATUS2) << 8);
+		data->vid = (i2c_smbus_read_byte_data(client,
+			     ADM1025_REG_VID) & 0x0f)
+			  | ((i2c_smbus_read_byte_data(client,
+			      ADM1025_REG_VID4) & 0x01) << 4);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_adm1025_init(void)
+{
+	return i2c_add_driver(&adm1025_driver);
+}
+
+static void __exit sensors_adm1025_exit(void)
+{
+	i2c_del_driver(&adm1025_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("ADM1025 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adm1025_init);
+module_exit(sensors_adm1025_exit);
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
new file mode 100644
index 000000000000..3c85fe150cd7
--- /dev/null
+++ b/drivers/hwmon/adm1026.c
@@ -0,0 +1,1714 @@
+/*
+    adm1026.c - Part of lm_sensors, Linux kernel modules for hardware
+	     monitoring
+    Copyright (C) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
+    Copyright (C) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
+
+    Chip details at:
+
+    <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <linux/hwmon-sysfs.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(adm1026);
+
+static int gpio_input[17]  = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+				-1, -1, -1, -1, -1, -1, -1, -1 }; 
+static int gpio_output[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+				-1, -1, -1, -1, -1, -1, -1, -1 };
+static int gpio_inverted[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+				-1, -1, -1, -1, -1, -1, -1, -1 };
+static int gpio_normal[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+				-1, -1, -1, -1, -1, -1, -1, -1 };
+static int gpio_fan[8] = { -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(gpio_input,int,NULL,0);
+MODULE_PARM_DESC(gpio_input,"List of GPIO pins (0-16) to program as inputs");
+module_param_array(gpio_output,int,NULL,0);
+MODULE_PARM_DESC(gpio_output,"List of GPIO pins (0-16) to program as "
+	"outputs");
+module_param_array(gpio_inverted,int,NULL,0);
+MODULE_PARM_DESC(gpio_inverted,"List of GPIO pins (0-16) to program as "
+	"inverted");
+module_param_array(gpio_normal,int,NULL,0);
+MODULE_PARM_DESC(gpio_normal,"List of GPIO pins (0-16) to program as "
+	"normal/non-inverted");
+module_param_array(gpio_fan,int,NULL,0);
+MODULE_PARM_DESC(gpio_fan,"List of GPIO pins (0-7) to program as fan tachs");
+
+/* Many ADM1026 constants specified below */
+
+/* The ADM1026 registers */
+#define ADM1026_REG_CONFIG1  0x00
+#define CFG1_MONITOR     0x01
+#define CFG1_INT_ENABLE  0x02
+#define CFG1_INT_CLEAR   0x04
+#define CFG1_AIN8_9      0x08
+#define CFG1_THERM_HOT   0x10
+#define CFG1_DAC_AFC     0x20
+#define CFG1_PWM_AFC     0x40
+#define CFG1_RESET       0x80
+#define ADM1026_REG_CONFIG2  0x01
+/* CONFIG2 controls FAN0/GPIO0 through FAN7/GPIO7 */
+#define ADM1026_REG_CONFIG3  0x07
+#define CFG3_GPIO16_ENABLE  0x01
+#define CFG3_CI_CLEAR  0x02
+#define CFG3_VREF_250  0x04
+#define CFG3_GPIO16_DIR  0x40
+#define CFG3_GPIO16_POL  0x80
+#define ADM1026_REG_E2CONFIG  0x13
+#define E2CFG_READ  0x01
+#define E2CFG_WRITE  0x02
+#define E2CFG_ERASE  0x04
+#define E2CFG_ROM  0x08
+#define E2CFG_CLK_EXT  0x80
+
+/* There are 10 general analog inputs and 7 dedicated inputs
+ * They are:
+ *    0 - 9  =  AIN0 - AIN9
+ *       10  =  Vbat
+ *       11  =  3.3V Standby
+ *       12  =  3.3V Main
+ *       13  =  +5V
+ *       14  =  Vccp (CPU core voltage)
+ *       15  =  +12V
+ *       16  =  -12V
+ */
+static u16 ADM1026_REG_IN[] = {
+		0x30, 0x31, 0x32, 0x33, 0x34, 0x35,
+		0x36, 0x37, 0x27, 0x29, 0x26, 0x2a,
+		0x2b, 0x2c, 0x2d, 0x2e, 0x2f
+	};
+static u16 ADM1026_REG_IN_MIN[] = {
+		0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d,
+		0x5e, 0x5f, 0x6d, 0x49, 0x6b, 0x4a,
+		0x4b, 0x4c, 0x4d, 0x4e, 0x4f
+	};
+static u16 ADM1026_REG_IN_MAX[] = {
+		0x50, 0x51, 0x52, 0x53, 0x54, 0x55,
+		0x56, 0x57, 0x6c, 0x41, 0x6a, 0x42,
+		0x43, 0x44, 0x45, 0x46, 0x47
+	};
+
+/* Temperatures are:
+ *    0 - Internal
+ *    1 - External 1
+ *    2 - External 2
+ */
+static u16 ADM1026_REG_TEMP[] = { 0x1f, 0x28, 0x29 };
+static u16 ADM1026_REG_TEMP_MIN[] = { 0x69, 0x48, 0x49 };
+static u16 ADM1026_REG_TEMP_MAX[] = { 0x68, 0x40, 0x41 };
+static u16 ADM1026_REG_TEMP_TMIN[] = { 0x10, 0x11, 0x12 };
+static u16 ADM1026_REG_TEMP_THERM[] = { 0x0d, 0x0e, 0x0f };
+static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f };
+
+#define ADM1026_REG_FAN(nr) (0x38 + (nr))
+#define ADM1026_REG_FAN_MIN(nr) (0x60 + (nr))
+#define ADM1026_REG_FAN_DIV_0_3 0x02
+#define ADM1026_REG_FAN_DIV_4_7 0x03
+
+#define ADM1026_REG_DAC  0x04
+#define ADM1026_REG_PWM  0x05
+
+#define ADM1026_REG_GPIO_CFG_0_3 0x08
+#define ADM1026_REG_GPIO_CFG_4_7 0x09
+#define ADM1026_REG_GPIO_CFG_8_11 0x0a
+#define ADM1026_REG_GPIO_CFG_12_15 0x0b
+/* CFG_16 in REG_CFG3 */
+#define ADM1026_REG_GPIO_STATUS_0_7 0x24
+#define ADM1026_REG_GPIO_STATUS_8_15 0x25
+/* STATUS_16 in REG_STATUS4 */
+#define ADM1026_REG_GPIO_MASK_0_7 0x1c
+#define ADM1026_REG_GPIO_MASK_8_15 0x1d
+/* MASK_16 in REG_MASK4 */
+
+#define ADM1026_REG_COMPANY 0x16
+#define ADM1026_REG_VERSTEP 0x17
+/* These are the recognized values for the above regs */
+#define ADM1026_COMPANY_ANALOG_DEV 0x41
+#define ADM1026_VERSTEP_GENERIC 0x40
+#define ADM1026_VERSTEP_ADM1026 0x44
+
+#define ADM1026_REG_MASK1 0x18
+#define ADM1026_REG_MASK2 0x19
+#define ADM1026_REG_MASK3 0x1a
+#define ADM1026_REG_MASK4 0x1b
+
+#define ADM1026_REG_STATUS1 0x20
+#define ADM1026_REG_STATUS2 0x21
+#define ADM1026_REG_STATUS3 0x22
+#define ADM1026_REG_STATUS4 0x23
+
+#define ADM1026_FAN_ACTIVATION_TEMP_HYST -6
+#define ADM1026_FAN_CONTROL_TEMP_RANGE 20
+#define ADM1026_PWM_MAX 255
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG 
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ */
+
+/* IN are scaled acording to built-in resistors.  These are the
+ *   voltages corresponding to 3/4 of full scale (192 or 0xc0)
+ *   NOTE: The -12V input needs an additional factor to account
+ *      for the Vref pullup resistor.
+ *      NEG12_OFFSET = SCALE * Vref / V-192 - Vref
+ *                   = 13875 * 2.50 / 1.875 - 2500
+ *                   = 16000
+ *
+ * The values in this table are based on Table II, page 15 of the
+ *    datasheet.
+ */
+static int adm1026_scaling[] = {  /* .001 Volts */
+		2250, 2250, 2250, 2250, 2250, 2250, 
+		1875, 1875, 1875, 1875, 3000, 3330, 
+		3330, 4995, 2250, 12000, 13875
+	};
+#define NEG12_OFFSET  16000
+#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from))
+#define INS_TO_REG(n,val)  (SENSORS_LIMIT(SCALE(val,adm1026_scaling[n],192),\
+	0,255))
+#define INS_FROM_REG(n,val) (SCALE(val,192,adm1026_scaling[n]))
+
+/* FAN speed is measured using 22.5kHz clock and counts for 2 pulses
+ *   and we assume a 2 pulse-per-rev fan tach signal
+ *      22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000
+ */
+#define FAN_TO_REG(val,div)  ((val)<=0 ? 0xff : SENSORS_LIMIT(1350000/((val)*\
+	(div)),1,254)) 
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==0xff ? 0 : 1350000/((val)*\
+	(div)))
+#define DIV_FROM_REG(val) (1<<(val))
+#define DIV_TO_REG(val) ((val)>=8 ? 3 : (val)>=4 ? 2 : (val)>=2 ? 1 : 0)
+
+/* Temperature is reported in 1 degC increments */
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\
+	-127,127))
+#define TEMP_FROM_REG(val) ((val) * 1000)
+#define OFFSET_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\
+	-127,127))
+#define OFFSET_FROM_REG(val) ((val) * 1000)
+
+#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
+#define PWM_FROM_REG(val) (val)
+
+#define PWM_MIN_TO_REG(val) ((val) & 0xf0)
+#define PWM_MIN_FROM_REG(val) (((val) & 0xf0) + ((val) >> 4))
+
+/* Analog output is a voltage, and scaled to millivolts.  The datasheet 
+ *   indicates that the DAC could be used to drive the fans, but in our 
+ *   example board (Arima HDAMA) it isn't connected to the fans at all.
+ */
+#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val)*255)+500)/2500),0,255)) 
+#define DAC_FROM_REG(val) (((val)*2500)/255)
+
+/* Typically used with systems using a v9.1 VRM spec ? */
+#define ADM1026_INIT_VRM  91
+
+/* Chip sampling rates
+ *
+ * Some sensors are not updated more frequently than once per second
+ *    so it doesn't make sense to read them more often than that.
+ *    We cache the results and return the saved data if the driver
+ *    is called again before a second has elapsed.
+ *
+ * Also, there is significant configuration data for this chip
+ *    So, we keep the config data up to date in the cache
+ *    when it is written and only sample it once every 5 *minutes*
+ */
+#define ADM1026_DATA_INTERVAL  (1 * HZ)
+#define ADM1026_CONFIG_INTERVAL  (5 * 60 * HZ)
+
+/* We allow for multiple chips in a single system.
+ *
+ * For each registered ADM1026, we need to keep state information
+ * at client->data. The adm1026_data structure is dynamically
+ * allocated, when a new client structure is allocated. */
+
+struct pwm_data {
+	u8 pwm;
+	u8 enable;
+	u8 auto_pwm_min;
+};
+
+struct adm1026_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	int valid;		/* !=0 if following fields are valid */
+	unsigned long last_reading;	/* In jiffies */
+	unsigned long last_config;	/* In jiffies */
+
+	u8 in[17];              /* Register value */
+	u8 in_max[17];          /* Register value */
+	u8 in_min[17];          /* Register value */
+	s8 temp[3];             /* Register value */
+	s8 temp_min[3];         /* Register value */
+	s8 temp_max[3];         /* Register value */
+	s8 temp_tmin[3];        /* Register value */
+	s8 temp_crit[3];        /* Register value */
+	s8 temp_offset[3];      /* Register value */
+	u8 fan[8];              /* Register value */
+	u8 fan_min[8];          /* Register value */
+	u8 fan_div[8];          /* Decoded value */
+	struct pwm_data pwm1;   /* Pwm control values */
+	int vid;                /* Decoded value */
+	u8 vrm;                 /* VRM version */
+	u8 analog_out;		/* Register value (DAC) */
+	long alarms;            /* Register encoding, combined */
+	long alarm_mask;        /* Register encoding, combined */
+	long gpio;              /* Register encoding, combined */
+	long gpio_mask;         /* Register encoding, combined */
+	u8 gpio_config[17];     /* Decoded value */
+	u8 config1;             /* Register value */
+	u8 config2;             /* Register value */
+	u8 config3;             /* Register value */
+};
+
+static int adm1026_attach_adapter(struct i2c_adapter *adapter);
+static int adm1026_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static int adm1026_detach_client(struct i2c_client *client);
+static int adm1026_read_value(struct i2c_client *client, u8 register);
+static int adm1026_write_value(struct i2c_client *client, u8 register,
+	int value); 
+static void adm1026_print_gpio(struct i2c_client *client);
+static void adm1026_fixup_gpio(struct i2c_client *client); 
+static struct adm1026_data *adm1026_update_device(struct device *dev);
+static void adm1026_init_client(struct i2c_client *client);
+
+
+static struct i2c_driver adm1026_driver = {
+	.owner          = THIS_MODULE,
+	.name           = "adm1026",
+	.flags          = I2C_DF_NOTIFY,
+	.attach_adapter = adm1026_attach_adapter,
+	.detach_client  = adm1026_detach_client,
+};
+
+int adm1026_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON)) {
+		return 0;
+	}
+	return i2c_detect(adapter, &addr_data, adm1026_detect);
+}
+
+int adm1026_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(client);
+	return 0;
+}
+
+int adm1026_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	if (reg < 0x80) {
+		/* "RAM" locations */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff;
+	} else {
+		/* EEPROM, do nothing */
+		res = 0;
+	}
+	return res;
+}
+
+int adm1026_write_value(struct i2c_client *client, u8 reg, int value)
+{
+	int res;
+
+	if (reg < 0x80) {
+		/* "RAM" locations */
+		res = i2c_smbus_write_byte_data(client, reg, value);
+	} else {
+		/* EEPROM, do nothing */
+		res = 0;
+	}
+	return res;
+}
+
+void adm1026_init_client(struct i2c_client *client)
+{
+	int value, i;
+	struct adm1026_data *data = i2c_get_clientdata(client);
+
+        dev_dbg(&client->dev, "Initializing device\n");
+	/* Read chip config */
+	data->config1 = adm1026_read_value(client, ADM1026_REG_CONFIG1);
+	data->config2 = adm1026_read_value(client, ADM1026_REG_CONFIG2);
+	data->config3 = adm1026_read_value(client, ADM1026_REG_CONFIG3);
+
+	/* Inform user of chip config */
+	dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n",
+		data->config1);
+	if ((data->config1 & CFG1_MONITOR) == 0) {
+		dev_dbg(&client->dev, "Monitoring not currently "
+			"enabled.\n");
+	}
+	if (data->config1 & CFG1_INT_ENABLE) {
+		dev_dbg(&client->dev, "SMBALERT interrupts are "
+			"enabled.\n");
+	}
+	if (data->config1 & CFG1_AIN8_9) {
+		dev_dbg(&client->dev, "in8 and in9 enabled. "
+			"temp3 disabled.\n");
+	} else {
+		dev_dbg(&client->dev, "temp3 enabled.  in8 and "
+			"in9 disabled.\n");
+	}
+	if (data->config1 & CFG1_THERM_HOT) {
+		dev_dbg(&client->dev, "Automatic THERM, PWM, "
+			"and temp limits enabled.\n");
+	}
+
+	value = data->config3;
+	if (data->config3 & CFG3_GPIO16_ENABLE) {
+		dev_dbg(&client->dev, "GPIO16 enabled.  THERM"
+			"pin disabled.\n");
+	} else {
+		dev_dbg(&client->dev, "THERM pin enabled.  "
+			"GPIO16 disabled.\n");
+	}
+	if (data->config3 & CFG3_VREF_250) {
+		dev_dbg(&client->dev, "Vref is 2.50 Volts.\n");
+	} else {
+		dev_dbg(&client->dev, "Vref is 1.82 Volts.\n");
+	}
+	/* Read and pick apart the existing GPIO configuration */
+	value = 0;
+	for (i = 0;i <= 15;++i) {
+		if ((i & 0x03) == 0) {
+			value = adm1026_read_value(client,
+					ADM1026_REG_GPIO_CFG_0_3 + i/4);
+		}
+		data->gpio_config[i] = value & 0x03;
+		value >>= 2;
+	}
+	data->gpio_config[16] = (data->config3 >> 6) & 0x03;
+
+	/* ... and then print it */
+	adm1026_print_gpio(client);
+
+	/* If the user asks us to reprogram the GPIO config, then
+	 * do it now.
+	 */
+	if (gpio_input[0] != -1 || gpio_output[0] != -1
+		|| gpio_inverted[0] != -1 || gpio_normal[0] != -1
+		|| gpio_fan[0] != -1) {
+		adm1026_fixup_gpio(client);
+	}
+
+	/* WE INTENTIONALLY make no changes to the limits,
+	 *   offsets, pwms, fans and zones.  If they were
+	 *   configured, we don't want to mess with them.
+	 *   If they weren't, the default is 100% PWM, no
+	 *   control and will suffice until 'sensors -s'
+	 *   can be run by the user.  We DO set the default 
+	 *   value for pwm1.auto_pwm_min to its maximum
+	 *   so that enabling automatic pwm fan control
+	 *   without first setting a value for pwm1.auto_pwm_min 
+	 *   will not result in potentially dangerous fan speed decrease.
+	 */
+	data->pwm1.auto_pwm_min=255;
+	/* Start monitoring */
+	value = adm1026_read_value(client, ADM1026_REG_CONFIG1);
+	/* Set MONITOR, clear interrupt acknowledge and s/w reset */
+	value = (value | CFG1_MONITOR) & (~CFG1_INT_CLEAR & ~CFG1_RESET);
+	dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
+	data->config1 = value;
+	adm1026_write_value(client, ADM1026_REG_CONFIG1, value);
+
+	/* initialize fan_div[] to hardware defaults */
+	value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3) |
+		(adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7) << 8);
+	for (i = 0;i <= 7;++i) {
+		data->fan_div[i] = DIV_FROM_REG(value & 0x03);
+		value >>= 2;
+	}
+}
+
+void adm1026_print_gpio(struct i2c_client *client)
+{
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int  i;
+
+	dev_dbg(&client->dev, "GPIO config is:");
+	for (i = 0;i <= 7;++i) {
+		if (data->config2 & (1 << i)) {
+			dev_dbg(&client->dev, "\t%sGP%s%d\n",
+				data->gpio_config[i] & 0x02 ? "" : "!",
+				data->gpio_config[i] & 0x01 ? "OUT" : "IN",
+				i);
+		} else {
+			dev_dbg(&client->dev, "\tFAN%d\n", i);
+		}
+	}
+	for (i = 8;i <= 15;++i) {
+		dev_dbg(&client->dev, "\t%sGP%s%d\n",
+			data->gpio_config[i] & 0x02 ? "" : "!",
+			data->gpio_config[i] & 0x01 ? "OUT" : "IN",
+			i);
+	}
+	if (data->config3 & CFG3_GPIO16_ENABLE) {
+		dev_dbg(&client->dev, "\t%sGP%s16\n",
+			data->gpio_config[16] & 0x02 ? "" : "!",
+			data->gpio_config[16] & 0x01 ? "OUT" : "IN");
+	} else {
+		/* GPIO16 is THERM  */
+		dev_dbg(&client->dev, "\tTHERM\n");
+	}
+}
+
+void adm1026_fixup_gpio(struct i2c_client *client)
+{
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int  i;
+	int  value;
+
+	/* Make the changes requested. */
+	/* We may need to unlock/stop monitoring or soft-reset the
+	 *    chip before we can make changes.  This hasn't been
+	 *    tested much.  FIXME
+	 */
+
+	/* Make outputs */
+	for (i = 0;i <= 16;++i) {
+		if (gpio_output[i] >= 0 && gpio_output[i] <= 16) {
+			data->gpio_config[gpio_output[i]] |= 0x01;
+		}
+		/* if GPIO0-7 is output, it isn't a FAN tach */
+		if (gpio_output[i] >= 0 && gpio_output[i] <= 7) {
+			data->config2 |= 1 << gpio_output[i];
+		}
+	}
+
+	/* Input overrides output */
+	for (i = 0;i <= 16;++i) {
+		if (gpio_input[i] >= 0 && gpio_input[i] <= 16) {
+			data->gpio_config[gpio_input[i]] &= ~ 0x01;
+		}
+		/* if GPIO0-7 is input, it isn't a FAN tach */
+		if (gpio_input[i] >= 0 && gpio_input[i] <= 7) {
+			data->config2 |= 1 << gpio_input[i];
+		}
+	}
+
+	/* Inverted  */
+	for (i = 0;i <= 16;++i) {
+		if (gpio_inverted[i] >= 0 && gpio_inverted[i] <= 16) {
+			data->gpio_config[gpio_inverted[i]] &= ~ 0x02;
+		}
+	}
+
+	/* Normal overrides inverted  */
+	for (i = 0;i <= 16;++i) {
+		if (gpio_normal[i] >= 0 && gpio_normal[i] <= 16) {
+			data->gpio_config[gpio_normal[i]] |= 0x02;
+		}
+	}
+
+	/* Fan overrides input and output */
+	for (i = 0;i <= 7;++i) {
+		if (gpio_fan[i] >= 0 && gpio_fan[i] <= 7) {
+			data->config2 &= ~(1 << gpio_fan[i]);
+		}
+	}
+
+	/* Write new configs to registers */
+	adm1026_write_value(client, ADM1026_REG_CONFIG2, data->config2);
+	data->config3 = (data->config3 & 0x3f)
+			| ((data->gpio_config[16] & 0x03) << 6);
+	adm1026_write_value(client, ADM1026_REG_CONFIG3, data->config3);
+	for (i = 15, value = 0;i >= 0;--i) {
+		value <<= 2;
+		value |= data->gpio_config[i] & 0x03;
+		if ((i & 0x03) == 0) {
+			adm1026_write_value(client,
+					ADM1026_REG_GPIO_CFG_0_3 + i/4,
+					value);
+			value = 0;
+		}
+	}
+
+	/* Print the new config */
+	adm1026_print_gpio(client);
+}
+
+
+static struct adm1026_data *adm1026_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int i;
+	long value, alarms, gpio;
+
+	down(&data->update_lock);
+	if (!data->valid
+	    || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) {
+		/* Things that change quickly */
+		dev_dbg(&client->dev,"Reading sensor values\n");
+		for (i = 0;i <= 16;++i) {
+			data->in[i] =
+			    adm1026_read_value(client, ADM1026_REG_IN[i]);
+		}
+
+		for (i = 0;i <= 7;++i) {
+			data->fan[i] =
+			    adm1026_read_value(client, ADM1026_REG_FAN(i));
+		}
+
+		for (i = 0;i <= 2;++i) {
+			/* NOTE: temp[] is s8 and we assume 2's complement
+			 *   "conversion" in the assignment   */
+			data->temp[i] =
+			    adm1026_read_value(client, ADM1026_REG_TEMP[i]);
+		}
+
+		data->pwm1.pwm = adm1026_read_value(client, 
+			ADM1026_REG_PWM);
+		data->analog_out = adm1026_read_value(client, 
+			ADM1026_REG_DAC);
+		/* GPIO16 is MSbit of alarms, move it to gpio */
+		alarms = adm1026_read_value(client, ADM1026_REG_STATUS4);
+		gpio = alarms & 0x80 ? 0x0100 : 0;  /* GPIO16 */
+		alarms &= 0x7f;
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_STATUS3);
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_STATUS2);
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_STATUS1);
+		data->alarms = alarms;
+
+		/* Read the GPIO values */
+		gpio |= adm1026_read_value(client, 
+			ADM1026_REG_GPIO_STATUS_8_15);
+		gpio <<= 8;
+		gpio |= adm1026_read_value(client, 
+			ADM1026_REG_GPIO_STATUS_0_7);
+		data->gpio = gpio;
+
+		data->last_reading = jiffies;
+	};  /* last_reading */
+
+	if (!data->valid ||
+	    time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) {
+		/* Things that don't change often */
+		dev_dbg(&client->dev, "Reading config values\n");
+		for (i = 0;i <= 16;++i) {
+			data->in_min[i] = adm1026_read_value(client, 
+				ADM1026_REG_IN_MIN[i]);
+			data->in_max[i] = adm1026_read_value(client, 
+				ADM1026_REG_IN_MAX[i]);
+		}
+
+		value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3)
+			| (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7)
+			<< 8);
+		for (i = 0;i <= 7;++i) {
+			data->fan_min[i] = adm1026_read_value(client, 
+				ADM1026_REG_FAN_MIN(i));
+			data->fan_div[i] = DIV_FROM_REG(value & 0x03);
+			value >>= 2;
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			/* NOTE: temp_xxx[] are s8 and we assume 2's 
+			 *    complement "conversion" in the assignment
+			 */
+			data->temp_min[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_MIN[i]);
+			data->temp_max[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_MAX[i]);
+			data->temp_tmin[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_TMIN[i]);
+			data->temp_crit[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_THERM[i]);
+			data->temp_offset[i] = adm1026_read_value(client, 
+				ADM1026_REG_TEMP_OFFSET[i]);
+		}
+
+		/* Read the STATUS/alarm masks */
+		alarms  = adm1026_read_value(client, ADM1026_REG_MASK4);
+		gpio    = alarms & 0x80 ? 0x0100 : 0;  /* GPIO16 */
+		alarms  = (alarms & 0x7f) << 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_MASK3);
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_MASK2);
+		alarms <<= 8;
+		alarms |= adm1026_read_value(client, ADM1026_REG_MASK1);
+		data->alarm_mask = alarms;
+
+		/* Read the GPIO values */
+		gpio |= adm1026_read_value(client, 
+			ADM1026_REG_GPIO_MASK_8_15);
+		gpio <<= 8;
+		gpio |= adm1026_read_value(client, ADM1026_REG_GPIO_MASK_0_7);
+		data->gpio_mask = gpio;
+
+		/* Read various values from CONFIG1 */
+		data->config1 = adm1026_read_value(client, 
+			ADM1026_REG_CONFIG1);
+		if (data->config1 & CFG1_PWM_AFC) {
+			data->pwm1.enable = 2;
+			data->pwm1.auto_pwm_min = 
+				PWM_MIN_FROM_REG(data->pwm1.pwm);
+		}
+		/* Read the GPIO config */
+		data->config2 = adm1026_read_value(client, 
+			ADM1026_REG_CONFIG2);
+		data->config3 = adm1026_read_value(client, 
+			ADM1026_REG_CONFIG3);
+		data->gpio_config[16] = (data->config3 >> 6) & 0x03;
+
+		value = 0;
+		for (i = 0;i <= 15;++i) {
+			if ((i & 0x03) == 0) {
+				value = adm1026_read_value(client,
+					    ADM1026_REG_GPIO_CFG_0_3 + i/4);
+			}
+			data->gpio_config[i] = value & 0x03;
+			value >>= 2;
+		}
+
+		data->last_config = jiffies;
+	};  /* last_config */
+
+	dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n");
+	data->vid = (data->gpio >> 11) & 0x1f;
+	data->valid = 1;
+	up(&data->update_lock);
+	return data;
+}
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr]));
+}
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev); 
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]));
+}
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = INS_TO_REG(nr, val);
+	adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]);
+	up(&data->update_lock);
+	return count; 
+}
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]));
+}
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = INS_TO_REG(nr, val);
+	adm1026_write_value(client, ADM1026_REG_IN_MAX[nr], data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define in_reg(offset)						\
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in,	\
+		NULL, offset);					\
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,	\
+		show_in_min, set_in_min, offset);		\
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,	\
+		show_in_max, set_in_max, offset);
+
+
+in_reg(0);
+in_reg(1);
+in_reg(2);
+in_reg(3);
+in_reg(4);
+in_reg(5);
+in_reg(6);
+in_reg(7);
+in_reg(8);
+in_reg(9);
+in_reg(10);
+in_reg(11);
+in_reg(12);
+in_reg(13);
+in_reg(14);
+in_reg(15);
+
+static ssize_t show_in16(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in[16]) -
+		NEG12_OFFSET);
+}
+static ssize_t show_in16_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev); 
+	return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_min[16])
+		- NEG12_OFFSET);
+}
+static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET);
+	adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]);
+	up(&data->update_lock);
+	return count; 
+}
+static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_max[16])
+			- NEG12_OFFSET);
+}
+static ssize_t set_in16_max(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[16] = INS_TO_REG(16, val+NEG12_OFFSET);
+	adm1026_write_value(client, ADM1026_REG_IN_MAX[16], data->in_max[16]);
+	up(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_in16, NULL, 16);
+static SENSOR_DEVICE_ATTR(in16_min, S_IRUGO | S_IWUSR, show_in16_min, set_in16_min, 16);
+static SENSOR_DEVICE_ATTR(in16_max, S_IRUGO | S_IWUSR, show_in16_max, set_in16_max, 16);
+
+
+
+
+/* Now add fan read/write functions */
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr],
+		data->fan_div[nr]));
+}
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+		data->fan_div[nr]));
+}
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, data->fan_div[nr]);
+	adm1026_write_value(client, ADM1026_REG_FAN_MIN(nr),
+		data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_offset(offset)                                         		\
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, 	\
+		offset - 1);							\
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,           	\
+		show_fan_min, set_fan_min, offset - 1);
+
+fan_offset(1);
+fan_offset(2);
+fan_offset(3);
+fan_offset(4);
+fan_offset(5);
+fan_offset(6);
+fan_offset(7);
+fan_offset(8);
+
+/* Adjust fan_min to account for new fan divisor */
+static void fixup_fan_min(struct device *dev, int fan, int old_div)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int    new_min;
+	int    new_div = data->fan_div[fan];
+
+	/* 0 and 0xff are special.  Don't adjust them */
+	if (data->fan_min[fan] == 0 || data->fan_min[fan] == 0xff) {
+		return;
+	}
+
+	new_min = data->fan_min[fan] * old_div / new_div;
+	new_min = SENSORS_LIMIT(new_min, 1, 254);
+	data->fan_min[fan] = new_min;
+	adm1026_write_value(client, ADM1026_REG_FAN_MIN(fan), new_min);
+}
+
+/* Now add fan_div read/write functions */
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", data->fan_div[nr]);
+}
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int    val,orig_div,new_div,shift;
+
+	val = simple_strtol(buf, NULL, 10);
+	new_div = DIV_TO_REG(val); 
+	if (new_div == 0) {
+		return -EINVAL;
+	}
+	down(&data->update_lock);
+	orig_div = data->fan_div[nr];
+	data->fan_div[nr] = DIV_FROM_REG(new_div);
+
+	if (nr < 4) { /* 0 <= nr < 4 */
+		shift = 2 * nr;
+		adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
+			((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
+			(new_div << shift)));
+	} else { /* 3 < nr < 8 */
+		shift = 2 * (nr - 4);
+		adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
+			((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
+			(new_div << shift)));
+	}
+
+	if (data->fan_div[nr] != orig_div) {
+		fixup_fan_min(dev,nr,orig_div);
+	}
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_offset_div(offset)                                          \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,         \
+		show_fan_div, set_fan_div, offset - 1);
+
+fan_offset_div(1);
+fan_offset_div(2);
+fan_offset_div(3);
+fan_offset_div(4);
+fan_offset_div(5);
+fan_offset_div(6);
+fan_offset_div(7);
+fan_offset_div(8);
+
+/* Temps */
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]));
+}
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_MIN[nr],
+		data->temp_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]));
+}
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_MAX[nr],
+		data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_reg(offset)						\
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, 	\
+		NULL, offset - 1);					\
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,	\
+		show_temp_min, set_temp_min, offset - 1);		\
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,	\
+		show_temp_max, set_temp_max, offset - 1);
+
+
+temp_reg(1);
+temp_reg(2);
+temp_reg(3);
+
+static ssize_t show_temp_offset(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_offset[nr]));
+}
+static ssize_t set_temp_offset(struct device *dev,
+		struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_offset[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_OFFSET[nr],
+		data->temp_offset[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_offset_reg(offset)							\
+static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR,		\
+		show_temp_offset, set_temp_offset, offset - 1);
+
+temp_offset_reg(1);
+temp_offset_reg(2);
+temp_offset_reg(3);
+
+static ssize_t show_temp_auto_point1_temp_hyst(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(
+		ADM1026_FAN_ACTIVATION_TEMP_HYST + data->temp_tmin[nr]));
+}
+static ssize_t show_temp_auto_point2_temp(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr] +
+		ADM1026_FAN_CONTROL_TEMP_RANGE));
+}
+static ssize_t show_temp_auto_point1_temp(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr]));
+}
+static ssize_t set_temp_auto_point1_temp(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_tmin[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_TMIN[nr],
+		data->temp_tmin[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_auto_point(offset)							\
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp, S_IRUGO | S_IWUSR,	\
+		show_temp_auto_point1_temp, set_temp_auto_point1_temp, 		\
+		offset - 1);							\
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO,	\
+		show_temp_auto_point1_temp_hyst, NULL, offset - 1);		\
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO,		\
+		show_temp_auto_point2_temp, NULL, offset - 1);
+
+temp_auto_point(1);
+temp_auto_point(2);
+temp_auto_point(3);
+
+static ssize_t show_temp_crit_enable(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", (data->config1 & CFG1_THERM_HOT) >> 4);
+}
+static ssize_t set_temp_crit_enable(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	if ((val == 1) || (val==0)) {
+		down(&data->update_lock);
+		data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4);
+		adm1026_write_value(client, ADM1026_REG_CONFIG1, 
+			data->config1);
+		up(&data->update_lock);
+	}
+	return count;
+}
+
+#define temp_crit_enable(offset)				\
+static DEVICE_ATTR(temp##offset##_crit_enable, S_IRUGO | S_IWUSR, \
+	show_temp_crit_enable, set_temp_crit_enable);
+
+temp_crit_enable(1);
+temp_crit_enable(2);
+temp_crit_enable(3);
+
+static ssize_t show_temp_crit(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
+}
+static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_crit[nr] = TEMP_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_TEMP_THERM[nr],
+		data->temp_crit[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_crit_reg(offset)						\
+static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR,	\
+		show_temp_crit, set_temp_crit, offset - 1);
+
+temp_crit_reg(1);
+temp_crit_reg(2);
+temp_crit_reg(3);
+
+static ssize_t show_analog_out_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", DAC_FROM_REG(data->analog_out));
+}
+static ssize_t set_analog_out_reg(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->analog_out = DAC_TO_REG(val);
+	adm1026_write_value(client, ADM1026_REG_DAC, data->analog_out);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg, 
+	set_analog_out_reg);
+
+static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
+}
+/* vid deprecated in favour of cpu0_vid, remove after 2005-11-11 */
+static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL);
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+
+static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", data->vrm);
+}
+static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+
+	data->vrm = simple_strtol(buf, NULL, 10);
+	return count;
+}
+
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+
+static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) (data->alarms));
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+
+static ssize_t show_alarm_mask(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%ld\n", data->alarm_mask);
+}
+static ssize_t set_alarm_mask(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	unsigned long mask;
+
+	down(&data->update_lock);
+	data->alarm_mask = val & 0x7fffffff;
+	mask = data->alarm_mask
+		| (data->gpio_mask & 0x10000 ? 0x80000000 : 0);
+	adm1026_write_value(client, ADM1026_REG_MASK1,
+		mask & 0xff);
+	mask >>= 8;
+	adm1026_write_value(client, ADM1026_REG_MASK2,
+		mask & 0xff);
+	mask >>= 8;
+	adm1026_write_value(client, ADM1026_REG_MASK3,
+		mask & 0xff);
+	mask >>= 8;
+	adm1026_write_value(client, ADM1026_REG_MASK4,
+		mask & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(alarm_mask, S_IRUGO | S_IWUSR, show_alarm_mask,
+	set_alarm_mask);
+
+
+static ssize_t show_gpio(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%ld\n", data->gpio);
+}
+static ssize_t set_gpio(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	long   gpio;
+
+	down(&data->update_lock);
+	data->gpio = val & 0x1ffff;
+	gpio = data->gpio;
+	adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff);
+	gpio >>= 8;
+	adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff);
+	gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f);
+	adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(gpio, S_IRUGO | S_IWUSR, show_gpio, set_gpio);
+
+
+static ssize_t show_gpio_mask(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%ld\n", data->gpio_mask);
+}
+static ssize_t set_gpio_mask(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	long   mask;
+
+	down(&data->update_lock);
+	data->gpio_mask = val & 0x1ffff;
+	mask = data->gpio_mask;
+	adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff);
+	mask >>= 8;
+	adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff);
+	mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f);
+	adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(gpio_mask, S_IRUGO | S_IWUSR, show_gpio_mask, set_gpio_mask);
+
+static ssize_t show_pwm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm1.pwm));
+}
+static ssize_t set_pwm_reg(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+
+	if (data->pwm1.enable == 1) {
+		int val = simple_strtol(buf, NULL, 10);
+
+		down(&data->update_lock);
+		data->pwm1.pwm = PWM_TO_REG(val);
+		adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
+		up(&data->update_lock);
+	}
+	return count;
+}
+static ssize_t show_auto_pwm_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", data->pwm1.auto_pwm_min);
+}
+static ssize_t set_auto_pwm_min(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255);
+	if (data->pwm1.enable == 2) { /* apply immediately */
+		data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
+			PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); 
+		adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_auto_pwm_max(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf,"%d\n", ADM1026_PWM_MAX);
+}
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1026_data *data = adm1026_update_device(dev);
+	return sprintf(buf,"%d\n", data->pwm1.enable);
+}
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1026_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	int     old_enable;
+
+	if ((val >= 0) && (val < 3)) {
+		down(&data->update_lock);
+		old_enable = data->pwm1.enable;
+		data->pwm1.enable = val;
+		data->config1 = (data->config1 & ~CFG1_PWM_AFC)
+				| ((val == 2) ? CFG1_PWM_AFC : 0);
+		adm1026_write_value(client, ADM1026_REG_CONFIG1,
+			data->config1);
+		if (val == 2) {  /* apply pwm1_auto_pwm_min to pwm1 */
+			data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
+				PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); 
+			adm1026_write_value(client, ADM1026_REG_PWM, 
+				data->pwm1.pwm);
+		} else if (!((old_enable == 1) && (val == 1))) {
+			/* set pwm to safe value */
+			data->pwm1.pwm = 255;
+			adm1026_write_value(client, ADM1026_REG_PWM, 
+				data->pwm1.pwm);
+		}
+		up(&data->update_lock);
+	}
+	return count;
+}
+
+/* enable PWM fan control */
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
+static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
+static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+	set_pwm_enable);
+static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+	set_pwm_enable);
+static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+	set_pwm_enable);
+static DEVICE_ATTR(temp1_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+	show_auto_pwm_min, set_auto_pwm_min);
+static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+	show_auto_pwm_min, set_auto_pwm_min);
+static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+	show_auto_pwm_min, set_auto_pwm_min);
+
+static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
+static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
+static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
+
+int adm1026_detect(struct i2c_adapter *adapter, int address,
+		int kind)
+{
+	int company, verstep;
+	struct i2c_client *new_client;
+	struct adm1026_data *data;
+	int err = 0;
+	const char *type_name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		/* We need to be able to do byte I/O */
+		goto exit;
+	};
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access adm1026_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct adm1026_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	memset(data, 0, sizeof(struct adm1026_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1026_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	company = adm1026_read_value(new_client, ADM1026_REG_COMPANY);
+	verstep = adm1026_read_value(new_client, ADM1026_REG_VERSTEP);
+
+	dev_dbg(&new_client->dev, "Detecting device at %d,0x%02x with"
+		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+		i2c_adapter_id(new_client->adapter), new_client->addr,
+		company, verstep);
+
+	/* If auto-detecting, Determine the chip type. */
+	if (kind <= 0) {
+		dev_dbg(&new_client->dev, "Autodetecting device at %d,0x%02x "
+			"...\n", i2c_adapter_id(adapter), address);
+		if (company == ADM1026_COMPANY_ANALOG_DEV
+		    && verstep == ADM1026_VERSTEP_ADM1026) {
+			kind = adm1026;
+		} else if (company == ADM1026_COMPANY_ANALOG_DEV
+			&& (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, ": Unrecognized stepping "
+				"0x%02x. Defaulting to ADM1026.\n", verstep);
+			kind = adm1026;
+		} else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, ": Found version/stepping "
+				"0x%02x. Assuming generic ADM1026.\n",
+				verstep);
+			kind = any_chip;
+		} else {
+			dev_dbg(&new_client->dev, ": Autodetection "
+				"failed\n");
+			/* Not an ADM1026 ... */
+			if (kind == 0)  { /* User used force=x,y */
+				dev_err(&adapter->dev, "Generic ADM1026 not "
+					"found at %d,0x%02x.  Try "
+					"force_adm1026.\n",
+					i2c_adapter_id(adapter), address);
+			}
+			err = 0;
+			goto exitfree;
+		}
+	}
+
+	/* Fill in the chip specific driver values */
+	switch (kind) {
+	case any_chip :
+		type_name = "adm1026";
+		break;
+	case adm1026 :
+		type_name = "adm1026";
+		break;
+	default :
+		dev_err(&adapter->dev, ": Internal error, invalid "
+			"kind (%d)!", kind);
+		err = -EFAULT;
+		goto exitfree;
+	}
+	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+
+	/* Fill in the remaining client fields */
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exitfree;
+
+	/* Set the VRM version */
+	data->vrm = i2c_which_vrm();
+
+	/* Initialize the ADM1026 chip */
+	adm1026_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in8_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in8_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in9_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in9_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in9_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in10_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in10_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in10_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in11_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in11_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in11_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in12_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in12_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in12_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in13_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in13_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in13_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in14_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in14_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in14_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in15_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in15_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in15_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in16_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in16_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in16_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan4_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan4_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan4_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan5_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan5_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan5_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan6_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan6_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan6_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan7_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan7_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan7_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan8_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan8_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan8_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_offset.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_offset.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_offset.dev_attr);
+	device_create_file(&new_client->dev, 
+		&sensor_dev_attr_temp1_auto_point1_temp.dev_attr);
+	device_create_file(&new_client->dev, 
+		&sensor_dev_attr_temp2_auto_point1_temp.dev_attr);
+	device_create_file(&new_client->dev, 
+		&sensor_dev_attr_temp3_auto_point1_temp.dev_attr);
+	device_create_file(&new_client->dev,
+		&sensor_dev_attr_temp1_auto_point1_temp_hyst.dev_attr);
+	device_create_file(&new_client->dev,
+		&sensor_dev_attr_temp2_auto_point1_temp_hyst.dev_attr);
+	device_create_file(&new_client->dev,
+		&sensor_dev_attr_temp3_auto_point1_temp_hyst.dev_attr);
+	device_create_file(&new_client->dev, 
+		&sensor_dev_attr_temp1_auto_point2_temp.dev_attr);
+	device_create_file(&new_client->dev, 
+		&sensor_dev_attr_temp2_auto_point2_temp.dev_attr);
+	device_create_file(&new_client->dev, 
+		&sensor_dev_attr_temp3_auto_point2_temp.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_crit.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_crit.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_crit.dev_attr);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_enable);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit_enable);
+	device_create_file(&new_client->dev, &dev_attr_temp3_crit_enable);
+	/* vid deprecated in favour of cpu0_vid, remove after 2005-11-11 */
+	device_create_file(&new_client->dev, &dev_attr_vid);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+	device_create_file(&new_client->dev, &dev_attr_vrm);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_alarm_mask);
+	device_create_file(&new_client->dev, &dev_attr_gpio);
+	device_create_file(&new_client->dev, &dev_attr_gpio_mask);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_pwm2);
+	device_create_file(&new_client->dev, &dev_attr_pwm3);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_point1_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_point1_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_point1_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_point2_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_point2_pwm);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_point2_pwm);
+	device_create_file(&new_client->dev, &dev_attr_analog_out);
+	return 0;
+
+	/* Error out and cleanup code */
+exitfree:
+	kfree(new_client);
+exit:
+	return err;
+}
+static int __init sm_adm1026_init(void)
+{
+	return i2c_add_driver(&adm1026_driver);
+}
+
+static void  __exit sm_adm1026_exit(void)
+{
+	i2c_del_driver(&adm1026_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
+              "Justin Thiessen <jthiessen@penguincomputing.com>");
+MODULE_DESCRIPTION("ADM1026 driver");
+
+module_init(sm_adm1026_init);
+module_exit(sm_adm1026_exit);
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
new file mode 100644
index 000000000000..9168e983ca1d
--- /dev/null
+++ b/drivers/hwmon/adm1031.c
@@ -0,0 +1,977 @@
+/*
+  adm1031.c - Part of lm_sensors, Linux kernel modules for hardware
+  monitoring
+  Based on lm75.c and lm85.c
+  Supports adm1030 / adm1031
+  Copyright (C) 2004 Alexandre d'Alton <alex@alexdalton.org>
+  Reworked by Jean Delvare <khali@linux-fr.org>
+  
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Following macros takes channel parameter starting from 0 to 2 */
+#define ADM1031_REG_FAN_SPEED(nr)	(0x08 + (nr))
+#define ADM1031_REG_FAN_DIV(nr)		(0x20  + (nr))
+#define ADM1031_REG_PWM			(0x22)
+#define ADM1031_REG_FAN_MIN(nr)		(0x10 + (nr))
+
+#define ADM1031_REG_TEMP_MAX(nr)	(0x14  + 4*(nr))
+#define ADM1031_REG_TEMP_MIN(nr)	(0x15  + 4*(nr))
+#define ADM1031_REG_TEMP_CRIT(nr)	(0x16  + 4*(nr))
+
+#define ADM1031_REG_TEMP(nr)		(0xa + (nr))
+#define ADM1031_REG_AUTO_TEMP(nr)	(0x24 + (nr))
+
+#define ADM1031_REG_STATUS(nr)		(0x2 + (nr))
+
+#define ADM1031_REG_CONF1		0x0
+#define ADM1031_REG_CONF2		0x1
+#define ADM1031_REG_EXT_TEMP		0x6
+
+#define ADM1031_CONF1_MONITOR_ENABLE	0x01	/* Monitoring enable */
+#define ADM1031_CONF1_PWM_INVERT	0x08	/* PWM Invert */
+#define ADM1031_CONF1_AUTO_MODE		0x80	/* Auto FAN */
+
+#define ADM1031_CONF2_PWM1_ENABLE	0x01
+#define ADM1031_CONF2_PWM2_ENABLE	0x02
+#define ADM1031_CONF2_TACH1_ENABLE	0x04
+#define ADM1031_CONF2_TACH2_ENABLE	0x08
+#define ADM1031_CONF2_TEMP_ENABLE(chan)	(0x10 << (chan))
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_2(adm1030, adm1031);
+
+typedef u8 auto_chan_table_t[8][2];
+
+/* Each client has this additional data */
+struct adm1031_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	int chip_type;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	/* The chan_select_table contains the possible configurations for
+	 * auto fan control.
+	 */
+	auto_chan_table_t *chan_select_table;
+	u16 alarm;
+	u8 conf1;
+	u8 conf2;
+	u8 fan[2];
+	u8 fan_div[2];
+	u8 fan_min[2];
+	u8 pwm[2];
+	u8 old_pwm[2];
+	s8 temp[3];
+	u8 ext_temp[3];
+	u8 auto_temp[3];
+	u8 auto_temp_min[3];
+	u8 auto_temp_off[3];
+	u8 auto_temp_max[3];
+	s8 temp_min[3];
+	s8 temp_max[3];
+	s8 temp_crit[3];
+};
+
+static int adm1031_attach_adapter(struct i2c_adapter *adapter);
+static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind);
+static void adm1031_init_client(struct i2c_client *client);
+static int adm1031_detach_client(struct i2c_client *client);
+static struct adm1031_data *adm1031_update_device(struct device *dev);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver adm1031_driver = {
+	.owner = THIS_MODULE,
+	.name = "adm1031",
+	.flags = I2C_DF_NOTIFY,
+	.attach_adapter = adm1031_attach_adapter,
+	.detach_client = adm1031_detach_client,
+};
+
+static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int
+adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+
+#define TEMP_TO_REG(val)		(((val) < 0 ? ((val - 500) / 1000) : \
+					((val + 500) / 1000)))
+
+#define TEMP_FROM_REG(val)		((val) * 1000)
+
+#define TEMP_FROM_REG_EXT(val, ext)	(TEMP_FROM_REG(val) + (ext) * 125)
+
+#define FAN_FROM_REG(reg, div)		((reg) ? (11250 * 60) / ((reg) * (div)) : 0)
+
+static int FAN_TO_REG(int reg, int div)
+{
+	int tmp;
+	tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div);
+	return tmp > 255 ? 255 : tmp;
+}
+
+#define FAN_DIV_FROM_REG(reg)		(1<<(((reg)&0xc0)>>6))
+
+#define PWM_TO_REG(val)			(SENSORS_LIMIT((val), 0, 255) >> 4)
+#define PWM_FROM_REG(val)		((val) << 4)
+
+#define FAN_CHAN_FROM_REG(reg)		(((reg) >> 5) & 7)
+#define FAN_CHAN_TO_REG(val, reg)	\
+	(((reg) & 0x1F) | (((val) << 5) & 0xe0))
+
+#define AUTO_TEMP_MIN_TO_REG(val, reg)	\
+	((((val)/500) & 0xf8)|((reg) & 0x7))
+#define AUTO_TEMP_RANGE_FROM_REG(reg)	(5000 * (1<< ((reg)&0x7)))
+#define AUTO_TEMP_MIN_FROM_REG(reg)	(1000 * ((((reg) >> 3) & 0x1f) << 2))
+
+#define AUTO_TEMP_MIN_FROM_REG_DEG(reg)	((((reg) >> 3) & 0x1f) << 2)
+
+#define AUTO_TEMP_OFF_FROM_REG(reg)		\
+	(AUTO_TEMP_MIN_FROM_REG(reg) - 5000)
+
+#define AUTO_TEMP_MAX_FROM_REG(reg)		\
+	(AUTO_TEMP_RANGE_FROM_REG(reg) +	\
+	AUTO_TEMP_MIN_FROM_REG(reg))
+
+static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
+{
+	int ret;
+	int range = val - AUTO_TEMP_MIN_FROM_REG(reg);
+
+	range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm);
+	ret = ((reg & 0xf8) |
+	       (range < 10000 ? 0 :
+		range < 20000 ? 1 :
+		range < 40000 ? 2 : range < 80000 ? 3 : 4));
+	return ret;
+}
+
+/* FAN auto control */
+#define GET_FAN_AUTO_BITFIELD(data, idx)	\
+	(*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx%2]
+
+/* The tables below contains the possible values for the auto fan 
+ * control bitfields. the index in the table is the register value.
+ * MSb is the auto fan control enable bit, so the four first entries
+ * in the table disables auto fan control when both bitfields are zero.
+ */
+static auto_chan_table_t auto_channel_select_table_adm1031 = {
+	{0, 0}, {0, 0}, {0, 0}, {0, 0},
+	{2 /*0b010 */ , 4 /*0b100 */ },
+	{2 /*0b010 */ , 2 /*0b010 */ },
+	{4 /*0b100 */ , 4 /*0b100 */ },
+	{7 /*0b111 */ , 7 /*0b111 */ },
+};
+
+static auto_chan_table_t auto_channel_select_table_adm1030 = {
+	{0, 0}, {0, 0}, {0, 0}, {0, 0},
+	{2 /*0b10 */		, 0},
+	{0xff /*invalid */	, 0},
+	{0xff /*invalid */	, 0},
+	{3 /*0b11 */		, 0},
+};
+
+/* That function checks if a bitfield is valid and returns the other bitfield
+ * nearest match if no exact match where found.
+ */
+static int
+get_fan_auto_nearest(struct adm1031_data *data,
+		     int chan, u8 val, u8 reg, u8 * new_reg)
+{
+	int i;
+	int first_match = -1, exact_match = -1;
+	u8 other_reg_val =
+	    (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1];
+
+	if (val == 0) {
+		*new_reg = 0;
+		return 0;
+	}
+
+	for (i = 0; i < 8; i++) {
+		if ((val == (*data->chan_select_table)[i][chan]) &&
+		    ((*data->chan_select_table)[i][chan ? 0 : 1] ==
+		     other_reg_val)) {
+			/* We found an exact match */
+			exact_match = i;
+			break;
+		} else if (val == (*data->chan_select_table)[i][chan] &&
+			   first_match == -1) {
+			/* Save the first match in case of an exact match has not been
+			 * found 
+			 */
+			first_match = i;
+		}
+	}
+
+	if (exact_match >= 0) {
+		*new_reg = exact_match;
+	} else if (first_match >= 0) {
+		*new_reg = first_match;
+	} else {
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static ssize_t show_fan_auto_channel(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr));
+}
+
+static ssize_t
+set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	u8 reg;
+	int ret;
+	u8 old_fan_mode;
+
+	old_fan_mode = data->conf1;
+
+	down(&data->update_lock);
+	
+	if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg))) {
+		up(&data->update_lock);
+		return ret;
+	}
+	if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^ 
+	    (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) {
+		if (data->conf1 & ADM1031_CONF1_AUTO_MODE){
+			/* Switch to Auto Fan Mode 
+			 * Save PWM registers 
+			 * Set PWM registers to 33% Both */
+			data->old_pwm[0] = data->pwm[0];
+			data->old_pwm[1] = data->pwm[1];
+			adm1031_write_value(client, ADM1031_REG_PWM, 0x55);
+		} else {
+			/* Switch to Manual Mode */
+			data->pwm[0] = data->old_pwm[0];
+			data->pwm[1] = data->old_pwm[1];
+			/* Restore PWM registers */
+			adm1031_write_value(client, ADM1031_REG_PWM, 
+					    data->pwm[0] | (data->pwm[1] << 4));
+		}
+	}
+	data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
+	adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1);
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_auto_channel_offset(offset)						\
+static ssize_t show_fan_auto_channel_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{										\
+	return show_fan_auto_channel(dev, buf, offset - 1);			\
+}										\
+static ssize_t set_fan_auto_channel_##offset (struct device *dev, struct device_attribute *attr,		\
+	const char *buf, size_t count)						\
+{										\
+	return set_fan_auto_channel(dev, buf, count, offset - 1);		\
+}										\
+static DEVICE_ATTR(auto_fan##offset##_channel, S_IRUGO | S_IWUSR,		\
+		   show_fan_auto_channel_##offset,				\
+		   set_fan_auto_channel_##offset)
+
+fan_auto_channel_offset(1);
+fan_auto_channel_offset(2);
+
+/* Auto Temps */
+static ssize_t show_auto_temp_off(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", 
+		       AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t show_auto_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t
+set_auto_temp_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
+	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
+			    data->auto_temp[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t
+set_auto_temp_max(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]);
+	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
+			    data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define auto_temp_reg(offset)							\
+static ssize_t show_auto_temp_##offset##_off (struct device *dev, struct device_attribute *attr, char *buf)	\
+{										\
+	return show_auto_temp_off(dev, buf, offset - 1);			\
+}										\
+static ssize_t show_auto_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{										\
+	return show_auto_temp_min(dev, buf, offset - 1);			\
+}										\
+static ssize_t show_auto_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)	\
+{										\
+	return show_auto_temp_max(dev, buf, offset - 1);			\
+}										\
+static ssize_t set_auto_temp_##offset##_min (struct device *dev, struct device_attribute *attr,		\
+					     const char *buf, size_t count)	\
+{										\
+	return set_auto_temp_min(dev, buf, count, offset - 1);		\
+}										\
+static ssize_t set_auto_temp_##offset##_max (struct device *dev, struct device_attribute *attr,		\
+					     const char *buf, size_t count)	\
+{										\
+	return set_auto_temp_max(dev, buf, count, offset - 1);		\
+}										\
+static DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO,				\
+		   show_auto_temp_##offset##_off, NULL);			\
+static DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR,			\
+		   show_auto_temp_##offset##_min, set_auto_temp_##offset##_min);\
+static DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR,			\
+		   show_auto_temp_##offset##_max, set_auto_temp_##offset##_max)
+
+auto_temp_reg(1);
+auto_temp_reg(2);
+auto_temp_reg(3);
+
+/* pwm */
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
+}
+static ssize_t
+set_pwm(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	int reg;
+
+	down(&data->update_lock);
+	if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && 
+	    (((val>>4) & 0xf) != 5)) {
+		/* In automatic mode, the only PWM accepted is 33% */
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+	data->pwm[nr] = PWM_TO_REG(val);
+	reg = adm1031_read_value(client, ADM1031_REG_PWM);
+	adm1031_write_value(client, ADM1031_REG_PWM,
+			    nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf)
+			    : (data->pwm[nr] & 0xf) | (reg & 0xf0));
+	up(&data->update_lock);
+	return count;
+}
+
+#define pwm_reg(offset)							\
+static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_pwm(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr,			\
+				 const char *buf, size_t count)		\
+{									\
+	return set_pwm(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,			\
+		   show_pwm_##offset, set_pwm_##offset)
+
+pwm_reg(1);
+pwm_reg(2);
+
+/* Fans */
+
+/*
+ * That function checks the cases where the fan reading is not
+ * relevant.  It is used to provide 0 as fan reading when the fan is
+ * not supposed to run
+ */
+static int trust_fan_readings(struct adm1031_data *data, int chan)
+{
+	int res = 0;
+
+	if (data->conf1 & ADM1031_CONF1_AUTO_MODE) {
+		switch (data->conf1 & 0x60) {
+		case 0x00:	/* remote temp1 controls fan1 remote temp2 controls fan2 */
+			res = data->temp[chan+1] >=
+			      AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]);
+			break;
+		case 0x20:	/* remote temp1 controls both fans */
+			res =
+			    data->temp[1] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]);
+			break;
+		case 0x40:	/* remote temp2 controls both fans */
+			res =
+			    data->temp[2] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]);
+			break;
+		case 0x60:	/* max controls both fans */
+			res =
+			    data->temp[0] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0])
+			    || data->temp[1] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1])
+			    || (data->chip_type == adm1031 
+				&& data->temp[2] >=
+				AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]));
+			break;
+		}
+	} else {
+		res = data->pwm[chan] > 0;
+	}
+	return res;
+}
+
+
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	int value;
+
+	value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr],
+				 FAN_DIV_FROM_REG(data->fan_div[nr])) : 0;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       FAN_FROM_REG(data->fan_min[nr],
+				    FAN_DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t
+set_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	if (val) {
+		data->fan_min[nr] = 
+			FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
+	} else {
+		data->fan_min[nr] = 0xff;
+	}
+	adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_fan_div(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	u8 tmp;
+	int old_div;
+	int new_min;
+
+	tmp = val == 8 ? 0xc0 :
+	      val == 4 ? 0x80 :
+	      val == 2 ? 0x40 :	
+	      val == 1 ? 0x00 :  
+	      0xff;
+	if (tmp == 0xff)
+		return -EINVAL;
+	
+	down(&data->update_lock);
+	old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
+	data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]);
+	new_min = data->fan_min[nr] * old_div / 
+		FAN_DIV_FROM_REG(data->fan_div[nr]);
+	data->fan_min[nr] = new_min > 0xff ? 0xff : new_min;
+	data->fan[nr] = data->fan[nr] * old_div / 
+		FAN_DIV_FROM_REG(data->fan_div[nr]);
+
+	adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr), 
+			    data->fan_div[nr]);
+	adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), 
+			    data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr,		\
+	const char *buf, size_t count)					\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr,		\
+	const char *buf, size_t count)					\
+{									\
+	return set_fan_div(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset,	\
+		   NULL);						\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		   show_fan_##offset##_min, set_fan_##offset##_min);	\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,		\
+		   show_fan_##offset##_div, set_fan_##offset##_div);	\
+static DEVICE_ATTR(auto_fan##offset##_min_pwm, S_IRUGO | S_IWUSR,	\
+		   show_pwm_##offset, set_pwm_##offset)
+
+fan_offset(1);
+fan_offset(2);
+
+
+/* Temps */
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	int ext;
+	ext = nr == 0 ?
+	    ((data->ext_temp[nr] >> 6) & 0x3) * 2 :
+	    (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
+	return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
+}
+static ssize_t show_temp_crit(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
+}
+static ssize_t
+set_temp_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
+			    data->temp_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_temp_max(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
+			    data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_temp_crit(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_crit[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
+			    data->temp_crit[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_reg(offset)							\
+static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{										\
+	return show_temp(dev, buf, offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)		\
+{										\
+	return show_temp_min(dev, buf, offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)		\
+{										\
+	return show_temp_max(dev, buf, offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_crit (struct device *dev, struct device_attribute *attr, char *buf)	\
+{										\
+	return show_temp_crit(dev, buf, offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr,			\
+					const char *buf, size_t count)		\
+{										\
+	return set_temp_min(dev, buf, count, offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr,			\
+					const char *buf, size_t count)		\
+{										\
+	return set_temp_max(dev, buf, count, offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_crit (struct device *dev, struct device_attribute *attr,			\
+					 const char *buf, size_t count)		\
+{										\
+	return set_temp_crit(dev, buf, count, offset - 1);			\
+}										\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset,		\
+		   NULL);							\
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_min, set_temp_##offset##_min);		\
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_max, set_temp_##offset##_max);		\
+static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_crit, set_temp_##offset##_crit)
+
+temp_reg(1);
+temp_reg(2);
+temp_reg(3);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarm);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+
+static int adm1031_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, adm1031_detect);
+}
+
+/* This function is called by i2c_detect */
+static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct adm1031_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct adm1031_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1031_driver;
+	new_client->flags = 0;
+
+	if (kind < 0) {
+		int id, co;
+		id = i2c_smbus_read_byte_data(new_client, 0x3d);
+		co = i2c_smbus_read_byte_data(new_client, 0x3e);
+
+		if (!((id == 0x31 || id == 0x30) && co == 0x41))
+			goto exit_free;
+		kind = (id == 0x30) ? adm1030 : adm1031;
+	}
+
+	if (kind <= 0)
+		kind = adm1031;
+
+	/* Given the detected chip type, set the chip name and the
+	 * auto fan control helper table. */
+	if (kind == adm1030) {
+		name = "adm1030";
+		data->chan_select_table = &auto_channel_select_table_adm1030;
+	} else if (kind == adm1031) {
+		name = "adm1031";
+		data->chan_select_table = &auto_channel_select_table_adm1031;
+	}
+	data->chip_type = kind;
+
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the ADM1031 chip */
+	adm1031_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_auto_fan1_channel);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_off);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_max);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_off);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_max);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_fan1_min_pwm);
+
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	if (kind == adm1031) {
+		device_create_file(&new_client->dev, &dev_attr_fan2_input);
+		device_create_file(&new_client->dev, &dev_attr_fan2_div);
+		device_create_file(&new_client->dev, &dev_attr_fan2_min);
+		device_create_file(&new_client->dev, &dev_attr_pwm2);
+		device_create_file(&new_client->dev,
+				   &dev_attr_auto_fan2_channel);
+		device_create_file(&new_client->dev, &dev_attr_temp3_input);
+		device_create_file(&new_client->dev, &dev_attr_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_off);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_auto_fan2_min_pwm);
+	}
+
+	return 0;
+
+exit_free:
+	kfree(new_client);
+exit:
+	return err;
+}
+
+static int adm1031_detach_client(struct i2c_client *client)
+{
+	int ret;
+	if ((ret = i2c_detach_client(client)) != 0) {
+		return ret;
+	}
+	kfree(client);
+	return 0;
+}
+
+static void adm1031_init_client(struct i2c_client *client)
+{
+	unsigned int read_val;
+	unsigned int mask;
+	struct adm1031_data *data = i2c_get_clientdata(client);
+
+	mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE);
+	if (data->chip_type == adm1031) {
+		mask |= (ADM1031_CONF2_PWM2_ENABLE |
+			ADM1031_CONF2_TACH2_ENABLE);
+	} 
+	/* Initialize the ADM1031 chip (enables fan speed reading ) */
+	read_val = adm1031_read_value(client, ADM1031_REG_CONF2);
+	if ((read_val | mask) != read_val) {
+	    adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask);
+	}
+
+	read_val = adm1031_read_value(client, ADM1031_REG_CONF1);
+	if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) {
+	    adm1031_write_value(client, ADM1031_REG_CONF1, read_val |
+				ADM1031_CONF1_MONITOR_ENABLE);
+	}
+
+}
+
+static struct adm1031_data *adm1031_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int chan;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting adm1031 update\n");
+		for (chan = 0;
+		     chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) {
+			u8 oldh, newh;
+
+			oldh =
+			    adm1031_read_value(client, ADM1031_REG_TEMP(chan));
+			data->ext_temp[chan] =
+			    adm1031_read_value(client, ADM1031_REG_EXT_TEMP);
+			newh =
+			    adm1031_read_value(client, ADM1031_REG_TEMP(chan));
+			if (newh != oldh) {
+				data->ext_temp[chan] =
+				    adm1031_read_value(client,
+						       ADM1031_REG_EXT_TEMP);
+#ifdef DEBUG
+				oldh =
+				    adm1031_read_value(client,
+						       ADM1031_REG_TEMP(chan));
+
+				/* oldh is actually newer */
+				if (newh != oldh)
+					dev_warn(&client->dev,
+						 "Remote temperature may be "
+						 "wrong.\n");
+#endif
+			}
+			data->temp[chan] = newh;
+
+			data->temp_min[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_MIN(chan));
+			data->temp_max[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_MAX(chan));
+			data->temp_crit[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_CRIT(chan));
+			data->auto_temp[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_AUTO_TEMP(chan));
+
+		}
+
+		data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1);
+		data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2);
+
+		data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0))
+			     | (adm1031_read_value(client, ADM1031_REG_STATUS(1))
+				<< 8);
+		if (data->chip_type == adm1030) {
+			data->alarm &= 0xc0ff;
+		}
+		
+		for (chan=0; chan<(data->chip_type == adm1030 ? 1 : 2); chan++) {
+			data->fan_div[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_DIV(chan));
+			data->fan_min[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_MIN(chan));
+			data->fan[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_SPEED(chan));
+			data->pwm[chan] =
+			    0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >> 
+				   (4*chan));
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_adm1031_init(void)
+{
+	return i2c_add_driver(&adm1031_driver);
+}
+
+static void __exit sensors_adm1031_exit(void)
+{
+	i2c_del_driver(&adm1031_driver);
+}
+
+MODULE_AUTHOR("Alexandre d'Alton <alex@alexdalton.org>");
+MODULE_DESCRIPTION("ADM1031/ADM1030 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adm1031_init);
+module_exit(sensors_adm1031_exit);
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
new file mode 100644
index 000000000000..5c68e9c311aa
--- /dev/null
+++ b/drivers/hwmon/adm9240.c
@@ -0,0 +1,791 @@
+/*
+ * adm9240.c	Part of lm_sensors, Linux kernel modules for hardware
+ * 		monitoring
+ *
+ * Copyright (C) 1999	Frodo Looijaard <frodol@dds.nl>
+ *			Philip Edelbrock <phil@netroedge.com>
+ * Copyright (C) 2003	Michiel Rook <michiel@grendelproject.nl>
+ * Copyright (C) 2005	Grant Coady <gcoady@gmail.com> with valuable
+ * 				guidance from Jean Delvare
+ *
+ * Driver supports	Analog Devices		ADM9240
+ *			Dallas Semiconductor	DS1780
+ *			National Semiconductor	LM81
+ *
+ * ADM9240 is the reference, DS1780 and LM81 are register compatibles
+ *
+ * Voltage	Six inputs are scaled by chip, VID also reported
+ * Temperature	Chip temperature to 0.5'C, maximum and max_hysteris
+ * Fans		2 fans, low speed alarm, automatic fan clock divider
+ * Alarms	16-bit map of active alarms
+ * Analog Out	0..1250 mV output
+ *
+ * Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear'
+ *
+ * Test hardware: Intel SE440BX-2 desktop motherboard --Grant
+ *
+ * LM81 extended temp reading not implemented
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
+					I2C_CLIENT_END };
+
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_3(adm9240, ds1780, lm81);
+
+/* ADM9240 registers */
+#define ADM9240_REG_MAN_ID		0x3e
+#define ADM9240_REG_DIE_REV		0x3f
+#define ADM9240_REG_CONFIG		0x40
+
+#define ADM9240_REG_IN(nr)		(0x20 + (nr))   /* 0..5 */
+#define ADM9240_REG_IN_MAX(nr)		(0x2b + (nr) * 2)
+#define ADM9240_REG_IN_MIN(nr)		(0x2c + (nr) * 2)
+#define ADM9240_REG_FAN(nr)		(0x28 + (nr))   /* 0..1 */
+#define ADM9240_REG_FAN_MIN(nr)		(0x3b + (nr))
+#define ADM9240_REG_INT(nr)		(0x41 + (nr))
+#define ADM9240_REG_INT_MASK(nr)	(0x43 + (nr))
+#define ADM9240_REG_TEMP		0x27
+#define ADM9240_REG_TEMP_HIGH		0x39
+#define ADM9240_REG_TEMP_HYST		0x3a
+#define ADM9240_REG_ANALOG_OUT		0x19
+#define ADM9240_REG_CHASSIS_CLEAR	0x46
+#define ADM9240_REG_VID_FAN_DIV		0x47
+#define ADM9240_REG_I2C_ADDR		0x48
+#define ADM9240_REG_VID4		0x49
+#define ADM9240_REG_TEMP_CONF		0x4b
+
+/* generalised scaling with integer rounding */
+static inline int SCALE(long val, int mul, int div)
+{
+	if (val < 0)
+		return (val * mul - div / 2) / div;
+	else
+		return (val * mul + div / 2) / div;
+}
+
+/* adm9240 internally scales voltage measurements */
+static const u16 nom_mv[] = { 2500, 2700, 3300, 5000, 12000, 2700 };
+
+static inline unsigned int IN_FROM_REG(u8 reg, int n)
+{
+	return SCALE(reg, nom_mv[n], 192);
+}
+
+static inline u8 IN_TO_REG(unsigned long val, int n)
+{
+	return SENSORS_LIMIT(SCALE(val, 192, nom_mv[n]), 0, 255);
+}
+
+/* temperature range: -40..125, 127 disables temperature alarm */
+static inline s8 TEMP_TO_REG(long val)
+{
+	return SENSORS_LIMIT(SCALE(val, 1, 1000), -40, 127);
+}
+
+/* two fans, each with low fan speed limit */
+static inline unsigned int FAN_FROM_REG(u8 reg, u8 div)
+{
+	if (!reg) /* error */
+		return -1;
+
+	if (reg == 255)
+		return 0;
+
+	return SCALE(1350000, 1, reg * div);
+}
+
+/* analog out 0..1250mV */
+static inline u8 AOUT_TO_REG(unsigned long val)
+{
+	return SENSORS_LIMIT(SCALE(val, 255, 1250), 0, 255);
+}
+
+static inline unsigned int AOUT_FROM_REG(u8 reg)
+{
+	return SCALE(reg, 1250, 255);
+}
+
+static int adm9240_attach_adapter(struct i2c_adapter *adapter);
+static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind);
+static void adm9240_init_client(struct i2c_client *client);
+static int adm9240_detach_client(struct i2c_client *client);
+static struct adm9240_data *adm9240_update_device(struct device *dev);
+
+/* driver data */
+static struct i2c_driver adm9240_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "adm9240",
+	.id		= I2C_DRIVERID_ADM9240,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= adm9240_attach_adapter,
+	.detach_client	= adm9240_detach_client,
+};
+
+/* per client data */
+struct adm9240_data {
+	enum chips type;
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;
+	unsigned long last_updated_measure;
+	unsigned long last_updated_config;
+
+	u8 in[6];		/* ro	in0_input */
+	u8 in_max[6];		/* rw	in0_max */
+	u8 in_min[6];		/* rw	in0_min */
+	u8 fan[2];		/* ro	fan1_input */
+	u8 fan_min[2];		/* rw	fan1_min */
+	u8 fan_div[2];		/* rw	fan1_div, read-only accessor */
+	s16 temp;		/* ro	temp1_input, 9-bit sign-extended */
+	s8 temp_high;		/* rw	temp1_max */
+	s8 temp_hyst;		/* rw	temp1_max_hyst */
+	u16 alarms;		/* ro	alarms */
+	u8 aout;		/* rw	aout_output */
+	u8 vid;			/* ro	vid */
+	u8 vrm;			/* --	vrm set on startup, no accessor */
+};
+
+/* i2c byte read/write interface */
+static int adm9240_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/*** sysfs accessors ***/
+
+/* temperature */
+#define show_temp(value, scale)					\
+static ssize_t show_##value(struct device *dev,			\
+			    struct device_attribute *attr,	\
+			    char *buf)				\
+{								\
+	struct adm9240_data *data = adm9240_update_device(dev);	\
+	return sprintf(buf, "%d\n", data->value * scale);	\
+}
+show_temp(temp_high, 1000);
+show_temp(temp_hyst, 1000);
+show_temp(temp, 500); /* 0.5'C per bit */
+
+#define set_temp(value, reg)					\
+static ssize_t set_##value(struct device *dev, 			\
+			   struct device_attribute *attr,	\
+			   const char *buf, size_t count)	\
+{								\
+	struct i2c_client *client = to_i2c_client(dev);		\
+	struct adm9240_data *data = adm9240_update_device(dev);	\
+	long temp = simple_strtoul(buf, NULL, 10);		\
+								\
+	down(&data->update_lock);				\
+	data->value = TEMP_TO_REG(temp);			\
+	adm9240_write_value(client, reg, data->value);		\
+	up(&data->update_lock);					\
+	return count;						\
+}
+
+set_temp(temp_high, ADM9240_REG_TEMP_HIGH);
+set_temp(temp_hyst, ADM9240_REG_TEMP_HYST);
+
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+		show_temp_high, set_temp_high);
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
+		show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+
+/* voltage */
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm9240_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val, nr);
+	adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_max(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm9240_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val, nr);
+	adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_in_offset(offset)						\
+static ssize_t show_in##offset(struct device *dev,			\
+			       struct device_attribute *attr,		\
+			       char *buf)				\
+{									\
+	return show_in(dev, buf, offset);				\
+}									\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);	\
+static ssize_t show_in##offset##_min(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     char *buf)				\
+{									\
+	return show_in_min(dev, buf, offset);				\
+}									\
+static ssize_t show_in##offset##_max(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     char *buf)				\
+{									\
+	return show_in_max(dev, buf, offset);				\
+}									\
+static ssize_t								\
+set_in##offset##_min(struct device *dev,				\
+		     struct device_attribute *attr, const char *buf,	\
+		     size_t count)					\
+{									\
+	return set_in_min(dev, buf, count, offset);			\
+}									\
+static ssize_t								\
+set_in##offset##_max(struct device *dev,				\
+		     struct device_attribute *attr, const char *buf,	\
+		     size_t count)					\
+{									\
+	return set_in_max(dev, buf, count, offset);			\
+}									\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,			\
+		show_in##offset##_min, set_in##offset##_min);		\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,			\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+show_in_offset(5);
+
+/* fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+				1 << data->fan_div[nr]));
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+				1 << data->fan_div[nr]));
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%d\n", 1 << data->fan_div[nr]);
+}
+
+/* write new fan div, callers must hold data->update_lock */
+static void adm9240_write_fan_div(struct i2c_client *client, int nr,
+		u8 fan_div)
+{
+	u8 reg, old, shift = (nr + 2) * 2;
+
+	reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
+	old = (reg >> shift) & 3;
+	reg &= ~(3 << shift);
+	reg |= (fan_div << shift);
+	adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg);
+	dev_dbg(&client->dev, "fan%d clock divider changed from %u "
+			"to %u\n", nr + 1, 1 << old, 1 << fan_div);
+}
+
+/* 
+ * set fan speed low limit:
+ *
+ * - value is zero: disable fan speed low limit alarm
+ *
+ * - value is below fan speed measurement range: enable fan speed low
+ *   limit alarm to be asserted while fan speed too slow to measure
+ *
+ * - otherwise: select fan clock divider to suit fan speed low limit,
+ *   measurement code may adjust registers to ensure fan speed reading
+ */
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm9240_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	u8 new_div;
+
+	down(&data->update_lock);
+
+	if (!val) {
+		data->fan_min[nr] = 255;
+		new_div = data->fan_div[nr];
+
+		dev_dbg(&client->dev, "fan%u low limit set disabled\n",
+				nr + 1);
+
+	} else if (val < 1350000 / (8 * 254)) {
+		new_div = 3;
+		data->fan_min[nr] = 254;
+
+		dev_dbg(&client->dev, "fan%u low limit set minimum %u\n",
+				nr + 1, FAN_FROM_REG(254, 1 << new_div));
+
+	} else {
+		unsigned int new_min = 1350000 / val;
+
+		new_div = 0;
+		while (new_min > 192 && new_div < 3) {
+			new_div++;
+			new_min /= 2;
+		}
+		if (!new_min) /* keep > 0 */
+			new_min++;
+
+		data->fan_min[nr] = new_min;
+
+		dev_dbg(&client->dev, "fan%u low limit set fan speed %u\n",
+				nr + 1, FAN_FROM_REG(new_min, 1 << new_div));
+	}
+
+	if (new_div != data->fan_div[nr]) {
+		data->fan_div[nr] = new_div;
+		adm9240_write_fan_div(client, nr, new_div);
+	}
+	adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr),
+			data->fan_min[nr]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev,			\
+				  struct device_attribute *attr,	\
+				  char *buf)				\
+{									\
+return show_fan(dev, buf, offset - 1);					\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev,		\
+					struct device_attribute *attr,	\
+					char *buf)			\
+{									\
+return show_fan_div(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev,		\
+					struct device_attribute *attr,	\
+					char *buf)			\
+{									\
+return show_fan_min(dev, buf, offset - 1);				\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, 		\
+				       struct device_attribute *attr,	\
+				       const char *buf, size_t count)	\
+{									\
+return set_fan_min(dev, buf, count, offset - 1);			\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, 			\
+		show_fan_##offset, NULL);				\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO, 				\
+		show_fan_##offset##_div, NULL);				\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+show_fan_offset(1);
+show_fan_offset(2);
+
+/* alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/* vid */
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+/* analog output */
+static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct adm9240_data *data = adm9240_update_device(dev);
+	return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout));
+}
+
+static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm9240_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->aout = AOUT_TO_REG(val);
+	adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout);
+	up(&data->update_lock);
+	return count;
+}
+static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
+
+/* chassis_clear */
+static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val = simple_strtol(buf, NULL, 10);
+
+	if (val == 1) {
+		adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
+		dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
+	}
+	return count;
+}
+static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear);
+
+
+/*** sensor chip detect and driver install ***/
+
+static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct adm9240_data *data;
+	int err = 0;
+	const char *name = "";
+	u8 man_id, die_rev;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct adm9240_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm9240_driver;
+	new_client->flags = 0;
+
+	if (kind == 0) {
+		kind = adm9240;
+	}
+
+	if (kind < 0) {
+
+		/* verify chip: reg address should match i2c address */
+		if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR)
+				!= address) {
+			dev_err(&adapter->dev, "detect fail: address match, "
+					"0x%02x\n", address);
+			goto exit_free;
+		}
+
+		/* check known chip manufacturer */
+		man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID);
+
+		if (man_id == 0x23) {
+			kind = adm9240;
+		} else if (man_id == 0xda) {
+			kind = ds1780;
+		} else if (man_id == 0x01) {
+			kind = lm81;
+		} else {
+			dev_err(&adapter->dev, "detect fail: unknown manuf, "
+					"0x%02x\n", man_id);
+			goto exit_free;
+		}
+
+		/* successful detect, print chip info */
+		die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV);
+		dev_info(&adapter->dev, "found %s revision %u\n",
+				man_id == 0x23 ? "ADM9240" :
+				man_id == 0xda ? "DS1780" : "LM81", die_rev);
+	}
+
+	/* either forced or detected chip kind */
+	if (kind == adm9240) {
+		name = "adm9240";
+	} else if (kind == ds1780) {
+		name = "ds1780";
+	} else if (kind == lm81) {
+		name = "lm81";
+	}
+
+	/* fill in the remaining client fields and attach */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->type = kind;
+	init_MUTEX(&data->update_lock);
+
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	adm9240_init_client(new_client);
+
+	/* populate sysfs filesystem */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_aout_output);
+	device_create_file(&new_client->dev, &dev_attr_chassis_clear);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+
+	return 0;
+exit_free:
+	kfree(new_client);
+exit:
+	return err;
+}
+
+static int adm9240_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, adm9240_detect);
+}
+
+static int adm9240_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+				"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static void adm9240_init_client(struct i2c_client *client)
+{
+	struct adm9240_data *data = i2c_get_clientdata(client);
+	u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG);
+	u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3;
+
+	data->vrm = i2c_which_vrm(); /* need this to report vid as mV */
+
+	dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10,
+			data->vrm % 10);
+
+	if (conf & 1) { /* measurement cycle running: report state */
+
+		dev_info(&client->dev, "status: config 0x%02x mode %u\n",
+				conf, mode);
+
+	} else { /* cold start: open limits before starting chip */
+		int i;
+
+		for (i = 0; i < 6; i++)
+		{
+			adm9240_write_value(client,
+					ADM9240_REG_IN_MIN(i), 0);
+			adm9240_write_value(client,
+					ADM9240_REG_IN_MAX(i), 255);
+		}
+		adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255);
+		adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255);
+		adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127);
+		adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127);
+
+		/* start measurement cycle */
+		adm9240_write_value(client, ADM9240_REG_CONFIG, 1);
+
+		dev_info(&client->dev, "cold start: config was 0x%02x "
+				"mode %u\n", conf, mode);
+	}
+}
+
+static struct adm9240_data *adm9240_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm9240_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	/* minimum measurement cycle: 1.75 seconds */
+	if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4))
+			|| !data->valid) {
+
+		for (i = 0; i < 6; i++) /* read voltages */
+		{
+			data->in[i] = adm9240_read_value(client,
+					ADM9240_REG_IN(i));
+		}
+		data->alarms = adm9240_read_value(client,
+					ADM9240_REG_INT(0)) |
+					adm9240_read_value(client,
+					ADM9240_REG_INT(1)) << 8;
+
+		/* read temperature: assume temperature changes less than
+		 * 0.5'C per two measurement cycles thus ignore possible
+		 * but unlikely aliasing error on lsb reading. --Grant */
+		data->temp = ((adm9240_read_value(client,
+					ADM9240_REG_TEMP) << 8) |
+					adm9240_read_value(client,
+					ADM9240_REG_TEMP_CONF)) / 128;
+
+		for (i = 0; i < 2; i++) /* read fans */
+		{
+			data->fan[i] = adm9240_read_value(client,
+					ADM9240_REG_FAN(i));
+
+			/* adjust fan clock divider on overflow */
+			if (data->valid && data->fan[i] == 255 &&
+					data->fan_div[i] < 3) {
+
+				adm9240_write_fan_div(client, i,
+						++data->fan_div[i]);
+
+				/* adjust fan_min if active, but not to 0 */
+				if (data->fan_min[i] < 255 &&
+						data->fan_min[i] >= 2)
+					data->fan_min[i] /= 2;
+			}
+		}
+		data->last_updated_measure = jiffies;
+	}
+
+	/* minimum config reading cycle: 300 seconds */
+	if (time_after(jiffies, data->last_updated_config + (HZ * 300))
+			|| !data->valid) {
+
+		for (i = 0; i < 6; i++)
+		{
+			data->in_min[i] = adm9240_read_value(client,
+					ADM9240_REG_IN_MIN(i));
+			data->in_max[i] = adm9240_read_value(client,
+					ADM9240_REG_IN_MAX(i));
+		}
+		for (i = 0; i < 2; i++)
+		{
+			data->fan_min[i] = adm9240_read_value(client,
+					ADM9240_REG_FAN_MIN(i));
+		}
+		data->temp_high = adm9240_read_value(client,
+				ADM9240_REG_TEMP_HIGH);
+		data->temp_hyst = adm9240_read_value(client,
+				ADM9240_REG_TEMP_HYST);
+
+		/* read fan divs and 5-bit VID */
+		i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
+		data->fan_div[0] = (i >> 4) & 3;
+		data->fan_div[1] = (i >> 6) & 3;
+		data->vid = i & 0x0f;
+		data->vid |= (adm9240_read_value(client,
+					ADM9240_REG_VID4) & 1) << 4;
+		/* read analog out */
+		data->aout = adm9240_read_value(client,
+				ADM9240_REG_ANALOG_OUT);
+
+		data->last_updated_config = jiffies;
+		data->valid = 1;
+	}
+	up(&data->update_lock);
+	return data;
+}
+
+static int __init sensors_adm9240_init(void)
+{
+	return i2c_add_driver(&adm9240_driver);
+}
+
+static void __exit sensors_adm9240_exit(void)
+{
+	i2c_del_driver(&adm9240_driver);
+}
+
+MODULE_AUTHOR("Michiel Rook <michiel@grendelproject.nl>, "
+		"Grant Coady <gcoady@gmail.com> and others");
+MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adm9240_init);
+module_exit(sensors_adm9240_exit);
+
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
new file mode 100644
index 000000000000..70d996d6fe0a
--- /dev/null
+++ b/drivers/hwmon/asb100.c
@@ -0,0 +1,1065 @@
+/*
+    asb100.c - Part of lm_sensors, Linux kernel modules for hardware
+	        monitoring
+
+    Copyright (C) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
+
+	(derived from w83781d.c)
+
+    Copyright (C) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>, and
+    Mark Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This driver supports the hardware sensor chips: Asus ASB100 and
+    ASB100-A "BACH".
+
+    ASB100-A supports pwm1, while plain ASB100 does not.  There is no known
+    way for the driver to tell which one is there.
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    asb100	7	3	1	4	0x31	0x0694	yes	no
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include "lm75.h"
+
+/*
+	HISTORY:
+	2003-12-29	1.0.0	Ported from lm_sensors project for kernel 2.6
+*/
+#define ASB100_VERSION "1.0.0"
+
+/* I2C addresses to scan */
+static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
+
+/* ISA addresses to scan (none) */
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(asb100);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+	"{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+/* Voltage IN registers 0-6 */
+#define ASB100_REG_IN(nr)	(0x20 + (nr))
+#define ASB100_REG_IN_MAX(nr)	(0x2b + (nr * 2))
+#define ASB100_REG_IN_MIN(nr)	(0x2c + (nr * 2))
+
+/* FAN IN registers 1-3 */
+#define ASB100_REG_FAN(nr)	(0x28 + (nr))
+#define ASB100_REG_FAN_MIN(nr)	(0x3b + (nr))
+
+/* TEMPERATURE registers 1-4 */
+static const u16 asb100_reg_temp[]	= {0, 0x27, 0x150, 0x250, 0x17};
+static const u16 asb100_reg_temp_max[]	= {0, 0x39, 0x155, 0x255, 0x18};
+static const u16 asb100_reg_temp_hyst[]	= {0, 0x3a, 0x153, 0x253, 0x19};
+
+#define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr])
+#define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr])
+#define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr])
+
+#define ASB100_REG_TEMP2_CONFIG	0x0152
+#define ASB100_REG_TEMP3_CONFIG	0x0252
+
+
+#define ASB100_REG_CONFIG	0x40
+#define ASB100_REG_ALARM1	0x41
+#define ASB100_REG_ALARM2	0x42
+#define ASB100_REG_SMIM1	0x43
+#define ASB100_REG_SMIM2	0x44
+#define ASB100_REG_VID_FANDIV	0x47
+#define ASB100_REG_I2C_ADDR	0x48
+#define ASB100_REG_CHIPID	0x49
+#define ASB100_REG_I2C_SUBADDR	0x4a
+#define ASB100_REG_PIN		0x4b
+#define ASB100_REG_IRQ		0x4c
+#define ASB100_REG_BANK		0x4e
+#define ASB100_REG_CHIPMAN	0x4f
+
+#define ASB100_REG_WCHIPID	0x58
+
+/* bit 7 -> enable, bits 0-3 -> duty cycle */
+#define ASB100_REG_PWM1		0x59
+
+/* CONVERSIONS
+   Rounding and limit checking is only done on the TO_REG variants. */
+
+/* These constants are a guess, consistent w/ w83781d */
+#define ASB100_IN_MIN (   0)
+#define ASB100_IN_MAX (4080)
+
+/* IN: 1/1000 V (0V to 4.08V)
+   REG: 16mV/bit */
+static u8 IN_TO_REG(unsigned val)
+{
+	unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX);
+	return (nval + 8) / 16;
+}
+
+static unsigned IN_FROM_REG(u8 reg)
+{
+	return reg * 16;
+}
+
+static u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == -1)
+		return 0;
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static int FAN_FROM_REG(u8 val, int div)
+{
+	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
+}
+
+/* These constants are a guess, consistent w/ w83781d */
+#define ASB100_TEMP_MIN (-128000)
+#define ASB100_TEMP_MAX ( 127000)
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static u8 TEMP_TO_REG(int temp)
+{
+	int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
+	ntemp += (ntemp<0 ? -500 : 500);
+	return (u8)(ntemp / 1000);
+}
+
+static int TEMP_FROM_REG(u8 reg)
+{
+	return (s8)reg * 1000;
+}
+
+/* PWM: 0 - 255 per sensors documentation
+   REG: (6.25% duty cycle per bit) */
+static u8 ASB100_PWM_TO_REG(int pwm)
+{
+	pwm = SENSORS_LIMIT(pwm, 0, 255);
+	return (u8)(pwm / 16);
+}
+
+static int ASB100_PWM_FROM_REG(u8 reg)
+{
+	return reg * 16;
+}
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
+   REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
+static u8 DIV_TO_REG(long val)
+{
+	return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
+}
+
+/* For each registered client, we need to keep some data in memory. That
+   data is pointed to by client->data. The structure itself is
+   dynamically allocated, at the same time the client itself is allocated. */
+struct asb100_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	unsigned long last_updated;	/* In jiffies */
+
+	/* array of 2 pointers to subclients */
+	struct i2c_client *lm75[2];
+
+	char valid;		/* !=0 if following fields are valid */
+	u8 in[7];		/* Register value */
+	u8 in_max[7];		/* Register value */
+	u8 in_min[7];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u16 temp[4];		/* Register value (0 and 3 are u8 only) */
+	u16 temp_max[4];	/* Register value (0 and 3 are u8 only) */
+	u16 temp_hyst[4];	/* Register value (0 and 3 are u8 only) */
+	u8 fan_div[3];		/* Register encoding, right justified */
+	u8 pwm;			/* Register encoding */
+	u8 vid;			/* Register encoding, combined */
+	u32 alarms;		/* Register encoding, combined */
+	u8 vrm;
+};
+
+static int asb100_read_value(struct i2c_client *client, u16 reg);
+static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val);
+
+static int asb100_attach_adapter(struct i2c_adapter *adapter);
+static int asb100_detect(struct i2c_adapter *adapter, int address, int kind);
+static int asb100_detach_client(struct i2c_client *client);
+static struct asb100_data *asb100_update_device(struct device *dev);
+static void asb100_init_client(struct i2c_client *client);
+
+static struct i2c_driver asb100_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "asb100",
+	.id		= I2C_DRIVERID_ASB100,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= asb100_attach_adapter,
+	.detach_client	= asb100_detach_client,
+};
+
+/* 7 Voltages */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct asb100_data *data = asb100_update_device(dev); \
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \
+}
+
+show_in_reg(in)
+show_in_reg(in_min)
+show_in_reg(in_max)
+
+#define set_in_reg(REG, reg) \
+static ssize_t set_in_##reg(struct device *dev, const char *buf, \
+		size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct asb100_data *data = i2c_get_clientdata(client); \
+	unsigned long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
+		data->in_##reg[nr]); \
+	up(&data->update_lock); \
+	return count; \
+}
+
+set_in_reg(MIN, min)
+set_in_reg(MAX, max)
+
+#define sysfs_in(offset) \
+static ssize_t \
+	show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+		show_in##offset, NULL); \
+static ssize_t \
+	show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_in_min(dev, buf, offset); \
+} \
+static ssize_t \
+	show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_in_max(dev, buf, offset); \
+} \
+static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	return set_in_min(dev, buf, count, offset); \
+} \
+static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	return set_in_max(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+		show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+		show_in##offset##_max, set_in##offset##_max);
+
+sysfs_in(0);
+sysfs_in(1);
+sysfs_in(2);
+sysfs_in(3);
+sysfs_in(4);
+sysfs_in(5);
+sysfs_in(6);
+
+#define device_create_file_in(client, offset) do { \
+	device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+	device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+	device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+/* 3 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+				size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	u32 val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+				size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int reg;
+	
+	down(&data->update_lock);
+
+	min = FAN_FROM_REG(data->fan_min[nr],
+			DIV_FROM_REG(data->fan_div[nr]));
+	data->fan_div[nr] = DIV_TO_REG(val);
+
+	switch(nr) {
+	case 0:	/* fan 1 */
+		reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		reg = (reg & 0xcf) | (data->fan_div[0] << 4);
+		asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
+		break;
+
+	case 1:	/* fan 2 */
+		reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		reg = (reg & 0x3f) | (data->fan_div[1] << 6);
+		asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
+		break;
+
+	case 2:	/* fan 3 */
+		reg = asb100_read_value(client, ASB100_REG_PIN);
+		reg = (reg & 0x3f) | (data->fan_div[2] << 6);
+		asb100_write_value(client, ASB100_REG_PIN, reg);
+		break;
+	}
+
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
+
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define sysfs_fan(offset) \
+static ssize_t show_fan##offset(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan(dev, buf, offset - 1); \
+} \
+static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan_min(dev, buf, offset - 1); \
+} \
+static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan_div(dev, buf, offset - 1); \
+} \
+static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+					size_t count) \
+{ \
+	return set_fan_min(dev, buf, count, offset - 1); \
+} \
+static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \
+					size_t count) \
+{ \
+	return set_fan_div(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+		show_fan##offset, NULL); \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_min, set_fan##offset##_min); \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_div, set_fan##offset##_div);
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+
+#define device_create_file_fan(client, offset) do { \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+/* 4 Temp. Sensors */
+static int sprintf_temp_from_reg(u16 reg, char *buf, int nr)
+{
+	int ret = 0;
+
+	switch (nr) {
+	case 1: case 2:
+		ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg));
+		break;
+	case 0: case 3: default:
+		ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
+		break;
+	}
+	return ret;
+}
+		 	
+#define show_temp_reg(reg) \
+static ssize_t show_##reg(struct device *dev, char *buf, int nr) \
+{ \
+	struct asb100_data *data = asb100_update_device(dev); \
+	return sprintf_temp_from_reg(data->reg[nr], buf, nr); \
+}
+
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_hyst);
+
+#define set_temp_reg(REG, reg) \
+static ssize_t set_##reg(struct device *dev, const char *buf, \
+			size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct asb100_data *data = i2c_get_clientdata(client); \
+	unsigned long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	switch (nr) { \
+	case 1: case 2: \
+		data->reg[nr] = LM75_TEMP_TO_REG(val); \
+		break; \
+	case 0: case 3: default: \
+		data->reg[nr] = TEMP_TO_REG(val); \
+		break; \
+	} \
+	asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
+			data->reg[nr]); \
+	up(&data->update_lock); \
+	return count; \
+}
+
+set_temp_reg(MAX, temp_max);
+set_temp_reg(HYST, temp_hyst);
+
+#define sysfs_temp(num) \
+static ssize_t show_temp##num(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL); \
+static ssize_t show_temp_max##num(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp_max(dev, buf, num-1); \
+} \
+static ssize_t set_temp_max##num(struct device *dev, struct device_attribute *attr, const char *buf, \
+					size_t count) \
+{ \
+	return set_temp_max(dev, buf, count, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \
+		show_temp_max##num, set_temp_max##num); \
+static ssize_t show_temp_hyst##num(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp_hyst(dev, buf, num-1); \
+} \
+static ssize_t set_temp_hyst##num(struct device *dev, struct device_attribute *attr, const char *buf, \
+					size_t count) \
+{ \
+	return set_temp_hyst(dev, buf, count, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \
+		show_temp_hyst##num, set_temp_hyst##num);
+
+sysfs_temp(1);
+sysfs_temp(2);
+sysfs_temp(3);
+sysfs_temp(4);
+
+/* VID */
+#define device_create_file_temp(client, num) do { \
+	device_create_file(&client->dev, &dev_attr_temp##num##_input); \
+	device_create_file(&client->dev, &dev_attr_temp##num##_max); \
+	device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \
+} while (0)
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+/* VRM */
+static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+	return count;
+}
+
+/* Alarms */
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm);
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms)
+
+/* 1 PWM */
+static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f));
+}
+
+static ssize_t set_pwm1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm &= 0x80; /* keep the enable bit */
+	data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
+	asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm_enable1(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0);
+}
+
+static ssize_t set_pwm_enable1(struct device *dev, struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm &= 0x0f; /* keep the duty cycle bits */
+	data->pwm |= (val ? 0x80 : 0x00);
+	asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+		show_pwm_enable1, set_pwm_enable1);
+#define device_create_file_pwm1(client) do { \
+	device_create_file(&new_client->dev, &dev_attr_pwm1); \
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \
+} while (0)
+
+/* This function is called when:
+	asb100_driver is inserted (when this module is loaded), for each
+		available adapter
+	when a new adapter is inserted (and asb100_driver is still present)
+ */
+static int asb100_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, asb100_detect);
+}
+
+static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
+		int kind, struct i2c_client *new_client)
+{
+	int i, id, err;
+	struct asb100_data *data = i2c_get_clientdata(new_client);
+
+	data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(data->lm75[0])) {
+		err = -ENOMEM;
+		goto ERROR_SC_0;
+	}
+	memset(data->lm75[0], 0x00, sizeof(struct i2c_client));
+
+	data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(data->lm75[1])) {
+		err = -ENOMEM;
+		goto ERROR_SC_1;
+	}
+	memset(data->lm75[1], 0x00, sizeof(struct i2c_client));
+
+	id = i2c_adapter_id(adapter);
+
+	if (force_subclients[0] == id && force_subclients[1] == address) {
+		for (i = 2; i <= 3; i++) {
+			if (force_subclients[i] < 0x48 ||
+			    force_subclients[i] > 0x4f) {
+				dev_err(&new_client->dev, "invalid subclient "
+					"address %d; must be 0x48-0x4f\n",
+					force_subclients[i]);
+				err = -ENODEV;
+				goto ERROR_SC_2;
+			}
+		}
+		asb100_write_value(new_client, ASB100_REG_I2C_SUBADDR,
+					(force_subclients[2] & 0x07) |
+					((force_subclients[3] & 0x07) <<4));
+		data->lm75[0]->addr = force_subclients[2];
+		data->lm75[1]->addr = force_subclients[3];
+	} else {
+		int val = asb100_read_value(new_client, ASB100_REG_I2C_SUBADDR);
+		data->lm75[0]->addr = 0x48 + (val & 0x07);
+		data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07);
+	}
+
+	if(data->lm75[0]->addr == data->lm75[1]->addr) {
+		dev_err(&new_client->dev, "duplicate addresses 0x%x "
+				"for subclients\n", data->lm75[0]->addr);
+		err = -ENODEV;
+		goto ERROR_SC_2;
+	}
+
+	for (i = 0; i <= 1; i++) {
+		i2c_set_clientdata(data->lm75[i], NULL);
+		data->lm75[i]->adapter = adapter;
+		data->lm75[i]->driver = &asb100_driver;
+		data->lm75[i]->flags = 0;
+		strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE);
+	}
+
+	if ((err = i2c_attach_client(data->lm75[0]))) {
+		dev_err(&new_client->dev, "subclient %d registration "
+			"at address 0x%x failed.\n", i, data->lm75[0]->addr);
+		goto ERROR_SC_2;
+	}
+
+	if ((err = i2c_attach_client(data->lm75[1]))) {
+		dev_err(&new_client->dev, "subclient %d registration "
+			"at address 0x%x failed.\n", i, data->lm75[1]->addr);
+		goto ERROR_SC_3;
+	}
+
+	return 0;
+
+/* Undo inits in case of errors */
+ERROR_SC_3:
+	i2c_detach_client(data->lm75[0]);
+ERROR_SC_2:
+	kfree(data->lm75[1]);
+ERROR_SC_1:
+	kfree(data->lm75[0]);
+ERROR_SC_0:
+	return err;
+}
+
+static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int err;
+	struct i2c_client *new_client;
+	struct asb100_data *data;
+
+	/* asb100 is SMBus only */
+	if (i2c_is_isa_adapter(adapter)) {
+		pr_debug("asb100.o: detect failed, "
+				"cannot attach to legacy adapter!\n");
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		pr_debug("asb100.o: detect failed, "
+				"smbus byte data not supported!\n");
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access asb100_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
+		pr_debug("asb100.o: detect failed, kmalloc failed!\n");
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+	memset(data, 0, sizeof(struct asb100_data));
+
+	new_client = &data->client;
+	init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &asb100_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	/* The chip may be stuck in some other bank than bank 0. This may
+	   make reading other information impossible. Specify a force=... or
+	   force_*=... parameter, and the chip will be reset to the right
+	   bank. */
+	if (kind < 0) {
+
+		int val1 = asb100_read_value(new_client, ASB100_REG_BANK);
+		int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN);
+
+		/* If we're in bank 0 */
+		if ( (!(val1 & 0x07)) &&
+				/* Check for ASB100 ID (low byte) */
+				( ((!(val1 & 0x80)) && (val2 != 0x94)) ||
+				/* Check for ASB100 ID (high byte ) */
+				((val1 & 0x80) && (val2 != 0x06)) ) ) {
+			pr_debug("asb100.o: detect failed, "
+					"bad chip id 0x%02x!\n", val2);
+			err = -ENODEV;
+			goto ERROR1;
+		}
+
+	} /* kind < 0 */
+
+	/* We have either had a force parameter, or we have already detected
+	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
+	asb100_write_value(new_client, ASB100_REG_BANK,
+		(asb100_read_value(new_client, ASB100_REG_BANK) & 0x78) | 0x80);
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		int val1 = asb100_read_value(new_client, ASB100_REG_WCHIPID);
+		int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN);
+
+		if ((val1 == 0x31) && (val2 == 0x06))
+			kind = asb100;
+		else {
+			if (kind == 0)
+				dev_warn(&new_client->dev, "ignoring "
+					"'force' parameter for unknown chip "
+					"at adapter %d, address 0x%02x.\n",
+					i2c_adapter_id(adapter), address);
+			err = -ENODEV;
+			goto ERROR1;
+		}
+	}
+
+	/* Fill in remaining client fields and put it into the global list */
+	strlcpy(new_client->name, "asb100", I2C_NAME_SIZE);
+	data->type = kind;
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR1;
+
+	/* Attach secondary lm75 clients */
+	if ((err = asb100_detect_subclients(adapter, address, kind,
+			new_client)))
+		goto ERROR2;
+
+	/* Initialize the chip */
+	asb100_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	data->fan_min[0] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(0));
+	data->fan_min[1] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(1));
+	data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2));
+
+	/* Register sysfs hooks */
+	device_create_file_in(new_client, 0);
+	device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	device_create_file_in(new_client, 4);
+	device_create_file_in(new_client, 5);
+	device_create_file_in(new_client, 6);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	device_create_file_temp(new_client, 3);
+	device_create_file_temp(new_client, 4);
+
+	device_create_file_vid(new_client);
+	device_create_file_vrm(new_client);
+
+	device_create_file_alarms(new_client);
+
+	device_create_file_pwm1(new_client);
+
+	return 0;
+
+ERROR2:
+	i2c_detach_client(new_client);
+ERROR1:
+	kfree(data);
+ERROR0:
+	return err;
+}
+
+static int asb100_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "client deregistration failed; "
+			"client not detached.\n");
+		return err;
+	}
+
+	if (i2c_get_clientdata(client)==NULL) {
+		/* subclients */
+		kfree(client);
+	} else {
+		/* main client */
+		kfree(i2c_get_clientdata(client));
+	}
+
+	return 0;
+}
+
+/* The SMBus locks itself, usually, but nothing may access the chip between
+   bank switches. */
+static int asb100_read_value(struct i2c_client *client, u16 reg)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	struct i2c_client *cl;
+	int res, bank;
+
+	down(&data->lock);
+
+	bank = (reg >> 8) & 0x0f;
+	if (bank > 2)
+		/* switch banks */
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
+
+	if (bank == 0 || bank > 2) {
+		res = i2c_smbus_read_byte_data(client, reg & 0xff);
+	} else {
+		/* switch to subclient */
+		cl = data->lm75[bank - 1];
+
+		/* convert from ISA to LM75 I2C addresses */
+		switch (reg & 0xff) {
+		case 0x50: /* TEMP */
+			res = swab16(i2c_smbus_read_word_data (cl, 0));
+			break;
+		case 0x52: /* CONFIG */
+			res = i2c_smbus_read_byte_data(cl, 1);
+			break;
+		case 0x53: /* HYST */
+			res = swab16(i2c_smbus_read_word_data (cl, 2));
+			break;
+		case 0x55: /* MAX */
+		default:
+			res = swab16(i2c_smbus_read_word_data (cl, 3));
+			break;
+		}
+	}
+
+	if (bank > 2)
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
+
+	up(&data->lock);
+
+	return res;
+}
+
+static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	struct i2c_client *cl;
+	int bank;
+
+	down(&data->lock);
+
+	bank = (reg >> 8) & 0x0f;
+	if (bank > 2)
+		/* switch banks */
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
+
+	if (bank == 0 || bank > 2) {
+		i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff);
+	} else {
+		/* switch to subclient */
+		cl = data->lm75[bank - 1];
+
+		/* convert from ISA to LM75 I2C addresses */
+		switch (reg & 0xff) {
+		case 0x52: /* CONFIG */
+			i2c_smbus_write_byte_data(cl, 1, value & 0xff);
+			break;
+		case 0x53: /* HYST */
+			i2c_smbus_write_word_data(cl, 2, swab16(value));
+			break;
+		case 0x55: /* MAX */
+			i2c_smbus_write_word_data(cl, 3, swab16(value));
+			break;
+		}
+	}
+
+	if (bank > 2)
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
+
+	up(&data->lock);
+}
+
+static void asb100_init_client(struct i2c_client *client)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	int vid = 0;
+
+	vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
+	vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
+	data->vrm = i2c_which_vrm();
+	vid = vid_from_reg(vid, data->vrm);
+
+	/* Start monitoring */
+	asb100_write_value(client, ASB100_REG_CONFIG, 
+		(asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01);
+}
+
+static struct asb100_data *asb100_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+		|| !data->valid) {
+
+		dev_dbg(&client->dev, "starting device update...\n");
+
+		/* 7 voltage inputs */
+		for (i = 0; i < 7; i++) {
+			data->in[i] = asb100_read_value(client,
+				ASB100_REG_IN(i));
+			data->in_min[i] = asb100_read_value(client,
+				ASB100_REG_IN_MIN(i));
+			data->in_max[i] = asb100_read_value(client,
+				ASB100_REG_IN_MAX(i));
+		}
+
+		/* 3 fan inputs */
+		for (i = 0; i < 3; i++) {
+			data->fan[i] = asb100_read_value(client,
+					ASB100_REG_FAN(i));
+			data->fan_min[i] = asb100_read_value(client,
+					ASB100_REG_FAN_MIN(i));
+		}
+
+		/* 4 temperature inputs */
+		for (i = 1; i <= 4; i++) {
+			data->temp[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP(i));
+			data->temp_max[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP_MAX(i));
+			data->temp_hyst[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP_HYST(i));
+		}
+
+		/* VID and fan divisors */
+		i = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		data->vid = i & 0x0f;
+		data->vid |= (asb100_read_value(client,
+				ASB100_REG_CHIPID) & 0x01) << 4;
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		data->fan_div[2] = (asb100_read_value(client,
+				ASB100_REG_PIN) >> 6) & 0x03;
+
+		/* PWM */
+		data->pwm = asb100_read_value(client, ASB100_REG_PWM1);
+
+		/* alarms */
+		data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) +
+			(asb100_read_value(client, ASB100_REG_ALARM2) << 8);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+
+		dev_dbg(&client->dev, "... device update complete\n");
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init asb100_init(void)
+{
+	return i2c_add_driver(&asb100_driver);
+}
+
+static void __exit asb100_exit(void)
+{
+	i2c_del_driver(&asb100_driver);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("ASB100 Bach driver");
+MODULE_LICENSE("GPL");
+
+module_init(asb100_init);
+module_exit(asb100_exit);
+
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
new file mode 100644
index 000000000000..0bcf82b4c07b
--- /dev/null
+++ b/drivers/hwmon/atxp1.c
@@ -0,0 +1,361 @@
+/*
+    atxp1.c - kernel module for setting CPU VID and general purpose
+                     I/Os using the Attansic ATXP1 chip.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
+MODULE_VERSION("0.6.2");
+MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
+
+#define ATXP1_VID	0x00
+#define ATXP1_CVID	0x01
+#define ATXP1_GPIO1	0x06
+#define ATXP1_GPIO2	0x0a
+#define ATXP1_VIDENA	0x20
+#define ATXP1_VIDMASK	0x1f
+#define ATXP1_GPIO1MASK	0x0f
+
+static unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+SENSORS_INSMOD_1(atxp1);
+
+static int atxp1_attach_adapter(struct i2c_adapter * adapter);
+static int atxp1_detach_client(struct i2c_client * client);
+static struct atxp1_data * atxp1_update_device(struct device *dev);
+static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind);
+
+static struct i2c_driver atxp1_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "atxp1",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter = atxp1_attach_adapter,
+	.detach_client	= atxp1_detach_client,
+};
+
+struct atxp1_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	unsigned long last_updated;
+	u8 valid;
+	struct {
+		u8 vid;		/* VID output register */
+		u8 cpu_vid; /* VID input from CPU */
+		u8 gpio1;   /* General purpose I/O register 1 */
+		u8 gpio2;   /* General purpose I/O register 2 */
+	} reg;
+	u8 vrm;			/* Detected CPU VRM */
+};
+
+static struct atxp1_data * atxp1_update_device(struct device *dev)
+{
+	struct i2c_client *client;
+	struct atxp1_data *data;
+
+	client = to_i2c_client(dev);
+	data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > HZ) ||
+	    (jiffies < data->last_updated) ||
+	    !data->valid) {
+
+		/* Update local register data */
+		data->reg.vid = i2c_smbus_read_byte_data(client, ATXP1_VID);
+		data->reg.cpu_vid = i2c_smbus_read_byte_data(client, ATXP1_CVID);
+		data->reg.gpio1 = i2c_smbus_read_byte_data(client, ATXP1_GPIO1);
+		data->reg.gpio2 = i2c_smbus_read_byte_data(client, ATXP1_GPIO2);
+
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return(data);
+}
+
+/* sys file functions for cpu0_vid */
+static ssize_t atxp1_showvcore(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	int size;
+	struct atxp1_data *data;
+
+	data = atxp1_update_device(dev);
+
+	size = sprintf(buf, "%d\n", vid_from_reg(data->reg.vid & ATXP1_VIDMASK, data->vrm));
+
+	return size;
+}
+
+static ssize_t atxp1_storevcore(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct atxp1_data *data;
+	struct i2c_client *client;
+	char vid;
+	char cvid;
+	unsigned int vcore;
+
+	client = to_i2c_client(dev);
+	data = atxp1_update_device(dev);
+
+	vcore = simple_strtoul(buf, NULL, 10);
+	vcore /= 25;
+	vcore *= 25;
+
+	/* Calculate VID */
+	vid = vid_to_reg(vcore, data->vrm);
+
+	if (vid < 0) {
+		dev_err(dev, "VID calculation failed.\n");
+		return -1;
+	}
+
+	/* If output enabled, use control register value. Otherwise original CPU VID */
+	if (data->reg.vid & ATXP1_VIDENA)
+		cvid = data->reg.vid & ATXP1_VIDMASK;
+	else
+		cvid = data->reg.cpu_vid;
+
+	/* Nothing changed, aborting */
+	if (vid == cvid)
+		return count;
+
+	dev_dbg(dev, "Setting VCore to %d mV (0x%02x)\n", vcore, vid);
+
+	/* Write every 25 mV step to increase stability */
+	if (cvid > vid) {
+		for (; cvid >= vid; cvid--) {
+        		i2c_smbus_write_byte_data(client, ATXP1_VID, cvid | ATXP1_VIDENA);
+		}
+	}
+	else {
+		for (; cvid <= vid; cvid++) {
+        		i2c_smbus_write_byte_data(client, ATXP1_VID, cvid | ATXP1_VIDENA);
+		}
+	}
+
+	data->valid = 0;
+
+	return count;
+}
+
+/* CPU core reference voltage
+    unit: millivolt
+*/
+static DEVICE_ATTR(cpu0_vid, S_IRUGO | S_IWUSR, atxp1_showvcore, atxp1_storevcore);
+
+/* sys file functions for GPIO1 */
+static ssize_t atxp1_showgpio1(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	int size;
+	struct atxp1_data *data;
+
+	data = atxp1_update_device(dev);
+
+	size = sprintf(buf, "0x%02x\n", data->reg.gpio1 & ATXP1_GPIO1MASK);
+
+	return size;
+}
+
+static ssize_t atxp1_storegpio1(struct device *dev, struct device_attribute *attr, const char*buf, size_t count)
+{
+	struct atxp1_data *data;
+	struct i2c_client *client;
+	unsigned int value;
+
+	client = to_i2c_client(dev);
+	data = atxp1_update_device(dev);
+
+	value = simple_strtoul(buf, NULL, 16);
+
+	value &= ATXP1_GPIO1MASK;
+
+	if (value != (data->reg.gpio1 & ATXP1_GPIO1MASK)) {
+		dev_info(dev, "Writing 0x%x to GPIO1.\n", value);
+
+		i2c_smbus_write_byte_data(client, ATXP1_GPIO1, value);
+
+		data->valid = 0;
+	}
+
+	return count;
+}
+
+/* GPIO1 data register
+    unit: Four bit as hex (e.g. 0x0f)
+*/
+static DEVICE_ATTR(gpio1, S_IRUGO | S_IWUSR, atxp1_showgpio1, atxp1_storegpio1);
+
+/* sys file functions for GPIO2 */
+static ssize_t atxp1_showgpio2(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	int size;
+	struct atxp1_data *data;
+
+	data = atxp1_update_device(dev);
+
+	size = sprintf(buf, "0x%02x\n", data->reg.gpio2);
+
+	return size;
+}
+
+static ssize_t atxp1_storegpio2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct atxp1_data *data;
+	struct i2c_client *client;
+	unsigned int value;
+
+	client = to_i2c_client(dev);
+	data = atxp1_update_device(dev);
+
+	value = simple_strtoul(buf, NULL, 16) & 0xff;
+
+	if (value != data->reg.gpio2) {
+		dev_info(dev, "Writing 0x%x to GPIO1.\n", value);
+
+		i2c_smbus_write_byte_data(client, ATXP1_GPIO2, value);
+
+		data->valid = 0;
+	}
+
+	return count;
+}
+
+/* GPIO2 data register
+    unit: Eight bit as hex (e.g. 0xff)
+*/
+static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2);
+
+
+static int atxp1_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, &atxp1_detect);
+};
+
+static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client * new_client;
+	struct atxp1_data * data;
+	int err = 0;
+	u8 temp;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct atxp1_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	memset(data, 0, sizeof(struct atxp1_data));
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &atxp1_driver;
+	new_client->flags = 0;
+
+	/* Detect ATXP1, checking if vendor ID registers are all zero */
+	if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
+	     (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
+	     (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
+	     (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) {
+
+		/* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
+		 * showing the same as register 0x00 */
+		temp = i2c_smbus_read_byte_data(new_client, 0x00);
+
+		if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
+			 (i2c_smbus_read_byte_data(new_client, 0x11) == temp) ))
+			goto exit_free;
+	}
+
+	/* Get VRM */
+	data->vrm = i2c_which_vrm();
+
+	if ((data->vrm != 90) && (data->vrm != 91)) {
+		dev_err(&new_client->dev, "Not supporting VRM %d.%d\n",
+				data->vrm / 10, data->vrm % 10);
+		goto exit_free;
+	}
+
+	strncpy(new_client->name, "atxp1", I2C_NAME_SIZE);
+
+	data->valid = 0;
+
+	init_MUTEX(&data->update_lock);
+
+	err = i2c_attach_client(new_client);
+
+	if (err)
+	{
+		dev_err(&new_client->dev, "Attach client error.\n");
+		goto exit_free;
+	}
+
+	device_create_file(&new_client->dev, &dev_attr_gpio1);
+	device_create_file(&new_client->dev, &dev_attr_gpio2);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+
+	dev_info(&new_client->dev, "Using VRM: %d.%d\n",
+			 data->vrm / 10, data->vrm % 10);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+};
+
+static int atxp1_detach_client(struct i2c_client * client)
+{
+	int err;
+
+	err = i2c_detach_client(client);
+
+	if (err)
+		dev_err(&client->dev, "Failed to detach client.\n");
+	else
+		kfree(i2c_get_clientdata(client));
+
+	return err;
+};
+
+static int __init atxp1_init(void)
+{
+	return i2c_add_driver(&atxp1_driver);
+};
+
+static void __exit atxp1_exit(void)
+{
+	i2c_del_driver(&atxp1_driver);
+};
+
+module_init(atxp1_init);
+module_exit(atxp1_exit);
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
new file mode 100644
index 000000000000..5360d58804f6
--- /dev/null
+++ b/drivers/hwmon/ds1621.c
@@ -0,0 +1,341 @@
+/*
+    ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Christian W. Zuckschwerdt  <zany@triq.net>  2000-11-23
+    based on lm75.c by Frodo Looijaard <frodol@dds.nl>
+    Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with 
+    the help of Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include "lm75.h"
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(ds1621);
+static int polarity = -1;
+module_param(polarity, int, 0);
+MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
+
+/* Many DS1621 constants specified below */
+/* Config register used for detection         */
+/*  7    6    5    4    3    2    1    0      */
+/* |Done|THF |TLF |NVB | X  | X  |POL |1SHOT| */
+#define DS1621_REG_CONFIG_NVB		0x10
+#define DS1621_REG_CONFIG_POLARITY	0x02
+#define DS1621_REG_CONFIG_1SHOT		0x01
+#define DS1621_REG_CONFIG_DONE		0x80
+
+/* The DS1621 registers */
+#define DS1621_REG_TEMP			0xAA /* word, RO */
+#define DS1621_REG_TEMP_MIN		0xA1 /* word, RW */
+#define DS1621_REG_TEMP_MAX		0xA2 /* word, RW */
+#define DS1621_REG_CONF			0xAC /* byte, RW */
+#define DS1621_COM_START		0xEE /* no data */
+#define DS1621_COM_STOP			0x22 /* no data */
+
+/* The DS1621 configuration register */
+#define DS1621_ALARM_TEMP_HIGH		0x40
+#define DS1621_ALARM_TEMP_LOW		0x20
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+#define ALARMS_FROM_REG(val) ((val) & \
+                              (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
+
+/* Each client has this additional data */
+struct ds1621_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;			/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u16 temp, temp_min, temp_max;	/* Register values, word */
+	u8 conf;			/* Register encoding, combined */
+};
+
+static int ds1621_attach_adapter(struct i2c_adapter *adapter);
+static int ds1621_detect(struct i2c_adapter *adapter, int address,
+			 int kind);
+static void ds1621_init_client(struct i2c_client *client);
+static int ds1621_detach_client(struct i2c_client *client);
+static struct ds1621_data *ds1621_update_client(struct device *dev);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ds1621_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "ds1621",
+	.id		= I2C_DRIVERID_DS1621,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= ds1621_attach_adapter,
+	.detach_client	= ds1621_detach_client,
+};
+
+/* All registers are word-sized, except for the configuration register.
+   DS1621 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int ds1621_read_value(struct i2c_client *client, u8 reg)
+{
+	if (reg == DS1621_REG_CONF)
+		return i2c_smbus_read_byte_data(client, reg);
+	else
+		return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+/* All registers are word-sized, except for the configuration register.
+   DS1621 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (reg == DS1621_REG_CONF)
+		return i2c_smbus_write_byte_data(client, reg, value);
+	else
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static void ds1621_init_client(struct i2c_client *client)
+{
+	int reg = ds1621_read_value(client, DS1621_REG_CONF);
+	/* switch to continuous conversion mode */
+	reg &= ~ DS1621_REG_CONFIG_1SHOT;
+
+	/* setup output polarity */
+	if (polarity == 0)
+		reg &= ~DS1621_REG_CONFIG_POLARITY;
+	else if (polarity == 1)
+		reg |= DS1621_REG_CONFIG_POLARITY;
+	
+	ds1621_write_value(client, DS1621_REG_CONF, reg);
+	
+	/* start conversion */
+	i2c_smbus_write_byte(client, DS1621_COM_START);
+}
+
+#define show(value)							\
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	struct ds1621_data *data = ds1621_update_client(dev);		\
+	return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value));	\
+}
+
+show(temp);
+show(temp_min);
+show(temp_max);
+
+#define set_temp(suffix, value, reg)					\
+static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf,	\
+				 size_t count)				\
+{									\
+	struct i2c_client *client = to_i2c_client(dev);			\
+	struct ds1621_data *data = ds1621_update_client(dev);		\
+	u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10));	\
+									\
+	down(&data->update_lock);					\
+	data->value = val;						\
+	ds1621_write_value(client, reg, data->value);			\
+	up(&data->update_lock);						\
+	return count;							\
+}
+
+set_temp(min, temp_min, DS1621_REG_TEMP_MIN);
+set_temp(max, temp_max, DS1621_REG_TEMP_MAX);
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct ds1621_data *data = ds1621_update_client(dev);
+	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+
+
+static int ds1621_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, ds1621_detect);
+}
+
+/* This function is called by i2c_detect */
+int ds1621_detect(struct i2c_adapter *adapter, int address,
+                  int kind)
+{
+	int conf, temp;
+	struct i2c_client *new_client;
+	struct ds1621_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA 
+				     | I2C_FUNC_SMBUS_WORD_DATA 
+				     | I2C_FUNC_SMBUS_WRITE_BYTE))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access ds1621_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct ds1621_data));
+	
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &ds1621_driver;
+	new_client->flags = 0;
+
+
+	/* Now, we do the remaining detection. It is lousy. */
+	if (kind < 0) {
+		/* The NVB bit should be low if no EEPROM write has been 
+		   requested during the latest 10ms, which is highly 
+		   improbable in our case. */
+		conf = ds1621_read_value(new_client, DS1621_REG_CONF);
+		if (conf & DS1621_REG_CONFIG_NVB)
+			goto exit_free;
+		/* The 7 lowest bits of a temperature should always be 0. */
+		temp = ds1621_read_value(new_client, DS1621_REG_TEMP);
+		if (temp & 0x007f)
+			goto exit_free;
+		temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN);
+		if (temp & 0x007f)
+			goto exit_free;
+		temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX);
+		if (temp & 0x007f)
+			goto exit_free;
+	}
+
+	/* Determine the chip type - only one kind supported! */
+	if (kind <= 0)
+		kind = ds1621;
+
+	/* Fill in remaining client fields and put it into the global list */
+	strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the DS1621 chip */
+	ds1621_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	
+	return 0;
+
+/* OK, this is not exactly good programming practice, usually. But it is
+   very code-efficient in this case. */
+      exit_free:
+	kfree(data);
+      exit:
+	return err;
+}
+
+static int ds1621_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+
+static struct ds1621_data *ds1621_update_client(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds1621_data *data = i2c_get_clientdata(client);
+	u8 new_conf;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting ds1621 update\n");
+
+		data->conf = ds1621_read_value(client, DS1621_REG_CONF);
+
+		data->temp = ds1621_read_value(client, DS1621_REG_TEMP);
+		
+		data->temp_min = ds1621_read_value(client,
+		                                    DS1621_REG_TEMP_MIN);
+		data->temp_max = ds1621_read_value(client,
+						    DS1621_REG_TEMP_MAX);
+
+		/* reset alarms if necessary */
+		new_conf = data->conf;
+		if (data->temp < data->temp_min)
+			new_conf &= ~DS1621_ALARM_TEMP_LOW;
+		if (data->temp > data->temp_max)
+			new_conf &= ~DS1621_ALARM_TEMP_HIGH;
+		if (data->conf != new_conf)
+			ds1621_write_value(client, DS1621_REG_CONF,
+					   new_conf);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init ds1621_init(void)
+{
+	return i2c_add_driver(&ds1621_driver);
+}
+
+static void __exit ds1621_exit(void)
+{
+	i2c_del_driver(&ds1621_driver);
+}
+
+
+MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
+MODULE_DESCRIPTION("DS1621 driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds1621_init);
+module_exit(ds1621_exit);
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
new file mode 100644
index 000000000000..da411741c2c5
--- /dev/null
+++ b/drivers/hwmon/fscher.c
@@ -0,0 +1,691 @@
+/*
+ * fscher.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* 
+ *  fujitsu siemens hermes chip, 
+ *  module based on fscpos.c 
+ *  Copyright (C) 2000 Hermann Jung <hej@odn.de>
+ *  Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
+ *  and Philip Edelbrock <phil@netroedge.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/*
+ * Addresses to scan
+ */
+
+static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(fscher);
+
+/*
+ * The FSCHER registers
+ */
+
+/* chip identification */
+#define FSCHER_REG_IDENT_0		0x00
+#define FSCHER_REG_IDENT_1		0x01
+#define FSCHER_REG_IDENT_2		0x02
+#define FSCHER_REG_REVISION		0x03
+
+/* global control and status */
+#define FSCHER_REG_EVENT_STATE		0x04
+#define FSCHER_REG_CONTROL		0x05
+
+/* watchdog */
+#define FSCHER_REG_WDOG_PRESET		0x28
+#define FSCHER_REG_WDOG_STATE		0x23
+#define FSCHER_REG_WDOG_CONTROL		0x21
+
+/* fan 0 */
+#define FSCHER_REG_FAN0_MIN		0x55
+#define FSCHER_REG_FAN0_ACT		0x0e
+#define FSCHER_REG_FAN0_STATE		0x0d
+#define FSCHER_REG_FAN0_RIPPLE		0x0f
+
+/* fan 1 */
+#define FSCHER_REG_FAN1_MIN		0x65
+#define FSCHER_REG_FAN1_ACT		0x6b
+#define FSCHER_REG_FAN1_STATE		0x62
+#define FSCHER_REG_FAN1_RIPPLE		0x6f
+
+/* fan 2 */
+#define FSCHER_REG_FAN2_MIN		0xb5
+#define FSCHER_REG_FAN2_ACT		0xbb
+#define FSCHER_REG_FAN2_STATE		0xb2
+#define FSCHER_REG_FAN2_RIPPLE		0xbf
+
+/* voltage supervision */
+#define FSCHER_REG_VOLT_12		0x45
+#define FSCHER_REG_VOLT_5		0x42
+#define FSCHER_REG_VOLT_BATT		0x48
+
+/* temperature 0 */
+#define FSCHER_REG_TEMP0_ACT		0x64
+#define FSCHER_REG_TEMP0_STATE		0x71
+
+/* temperature 1 */
+#define FSCHER_REG_TEMP1_ACT		0x32
+#define FSCHER_REG_TEMP1_STATE		0x81
+
+/* temperature 2 */
+#define FSCHER_REG_TEMP2_ACT		0x35
+#define FSCHER_REG_TEMP2_STATE		0x91
+
+/*
+ * Functions declaration
+ */
+
+static int fscher_attach_adapter(struct i2c_adapter *adapter);
+static int fscher_detect(struct i2c_adapter *adapter, int address, int kind);
+static int fscher_detach_client(struct i2c_client *client);
+static struct fscher_data *fscher_update_device(struct device *dev);
+static void fscher_init_client(struct i2c_client *client);
+
+static int fscher_read_value(struct i2c_client *client, u8 reg);
+static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value);
+
+/*
+ * Driver data (common to all clients)
+ */
+ 
+static struct i2c_driver fscher_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "fscher",
+	.id		= I2C_DRIVERID_FSCHER,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= fscher_attach_adapter,
+	.detach_client	= fscher_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct fscher_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* register values */
+	u8 revision;		/* revision of chip */
+	u8 global_event;	/* global event status */
+	u8 global_control;	/* global control register */
+	u8 watchdog[3];		/* watchdog */
+	u8 volt[3];		/* 12, 5, battery voltage */ 
+	u8 temp_act[3];		/* temperature */
+	u8 temp_status[3];	/* status of sensor */
+	u8 fan_act[3];		/* fans revolutions per second */
+	u8 fan_status[3];	/* fan status */
+	u8 fan_min[3];		/* fan min value for rps */
+	u8 fan_ripple[3];	/* divider for rps */
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define sysfs_r(kind, sub, offset, reg) \
+static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \
+static ssize_t show_##kind##offset##sub (struct device *, struct device_attribute *attr, char *); \
+static ssize_t show_##kind##offset##sub (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct fscher_data *data = fscher_update_device(dev); \
+	return show_##kind##sub(data, buf, (offset)); \
+}
+
+#define sysfs_w(kind, sub, offset, reg) \
+static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \
+static ssize_t set_##kind##offset##sub (struct device *, struct device_attribute *attr, const char *, size_t); \
+static ssize_t set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct fscher_data *data = i2c_get_clientdata(client); \
+	return set_##kind##sub(client, data, buf, count, (offset), reg); \
+}
+
+#define sysfs_rw_n(kind, sub, offset, reg) \
+sysfs_r(kind, sub, offset, reg) \
+sysfs_w(kind, sub, offset, reg) \
+static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub);
+
+#define sysfs_rw(kind, sub, reg) \
+sysfs_r(kind, sub, 0, reg) \
+sysfs_w(kind, sub, 0, reg) \
+static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub);
+
+#define sysfs_ro_n(kind, sub, offset, reg) \
+sysfs_r(kind, sub, offset, reg) \
+static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL);
+
+#define sysfs_ro(kind, sub, reg) \
+sysfs_r(kind, sub, 0, reg) \
+static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL);
+
+#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \
+sysfs_rw_n(pwm,        , offset, reg_min) \
+sysfs_rw_n(fan, _status, offset, reg_status) \
+sysfs_rw_n(fan, _div   , offset, reg_ripple) \
+sysfs_ro_n(fan, _input , offset, reg_act)
+
+#define sysfs_temp(offset, reg_status, reg_act) \
+sysfs_rw_n(temp, _status, offset, reg_status) \
+sysfs_ro_n(temp, _input , offset, reg_act)
+    
+#define sysfs_in(offset, reg_act) \
+sysfs_ro_n(in, _input, offset, reg_act)
+
+#define sysfs_revision(reg_revision) \
+sysfs_ro(revision, , reg_revision)
+
+#define sysfs_alarms(reg_events) \
+sysfs_ro(alarms, , reg_events)
+
+#define sysfs_control(reg_control) \
+sysfs_rw(control, , reg_control)
+
+#define sysfs_watchdog(reg_control, reg_status, reg_preset) \
+sysfs_rw(watchdog, _control, reg_control) \
+sysfs_rw(watchdog, _status , reg_status) \
+sysfs_rw(watchdog, _preset , reg_preset)
+
+sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN,
+	     FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT)
+sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN,
+	     FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT)
+sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN,
+	     FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT)
+
+sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT)
+sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT)
+sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT)
+
+sysfs_in(0, FSCHER_REG_VOLT_12)
+sysfs_in(1, FSCHER_REG_VOLT_5)
+sysfs_in(2, FSCHER_REG_VOLT_BATT)
+
+sysfs_revision(FSCHER_REG_REVISION)
+sysfs_alarms(FSCHER_REG_EVENTS)
+sysfs_control(FSCHER_REG_CONTROL)
+sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET)
+  
+#define device_create_file_fan(client, offset) \
+do { \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_status); \
+	device_create_file(&client->dev, &dev_attr_pwm##offset); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+} while (0)
+
+#define device_create_file_temp(client, offset) \
+do { \
+	device_create_file(&client->dev, &dev_attr_temp##offset##_status); \
+	device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
+} while (0)
+
+#define device_create_file_in(client, offset) \
+do { \
+	device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+} while (0)
+
+#define device_create_file_revision(client) \
+do { \
+	device_create_file(&client->dev, &dev_attr_revision); \
+} while (0)
+
+#define device_create_file_alarms(client) \
+do { \
+	device_create_file(&client->dev, &dev_attr_alarms); \
+} while (0)
+
+#define device_create_file_control(client) \
+do { \
+	device_create_file(&client->dev, &dev_attr_control); \
+} while (0)
+
+#define device_create_file_watchdog(client) \
+do { \
+	device_create_file(&client->dev, &dev_attr_watchdog_status); \
+	device_create_file(&client->dev, &dev_attr_watchdog_control); \
+	device_create_file(&client->dev, &dev_attr_watchdog_preset); \
+} while (0)
+  
+/*
+ * Real code
+ */
+
+static int fscher_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, fscher_detect);
+}
+
+static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct fscher_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	 * client structure, even though we cannot fill it completely yet.
+	 * But it allows us to access i2c_smbus_read_byte_data. */
+	if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+  	}
+	memset(data, 0, sizeof(struct fscher_data));
+
+	/* The common I2C client data is placed right before the
+	 * Hermes-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &fscher_driver;
+	new_client->flags = 0;
+
+	/* Do the remaining detection unless force or force_fscher parameter */
+	if (kind < 0) {
+		if ((i2c_smbus_read_byte_data(new_client,
+		     FSCHER_REG_IDENT_0) != 0x48)	/* 'H' */
+		 || (i2c_smbus_read_byte_data(new_client,
+		     FSCHER_REG_IDENT_1) != 0x45)	/* 'E' */
+		 || (i2c_smbus_read_byte_data(new_client,
+		     FSCHER_REG_IDENT_2) != 0x52))	/* 'R' */
+			goto exit_free;
+	}
+
+	/* Fill in the remaining client fields and put it into the
+	 * global list */
+	strlcpy(new_client->name, "fscher", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	fscher_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file_revision(new_client);
+	device_create_file_alarms(new_client);
+	device_create_file_control(new_client);
+	device_create_file_watchdog(new_client);
+
+	device_create_file_in(new_client, 0);
+	device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	device_create_file_temp(new_client, 3);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int fscher_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static int fscher_read_value(struct i2c_client *client, u8 reg)
+{
+	dev_dbg(&client->dev, "read reg 0x%02x\n", reg);
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n",
+		reg, value);
+
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Called when we have found a new FSC Hermes. */
+static void fscher_init_client(struct i2c_client *client)
+{
+	struct fscher_data *data = i2c_get_clientdata(client);
+
+	/* Read revision from chip */
+	data->revision =  fscher_read_value(client, FSCHER_REG_REVISION);
+}
+
+static struct fscher_data *fscher_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct fscher_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting fscher update\n");
+
+		data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT);
+		data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT);
+		data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT);
+		data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE);
+		data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE);
+		data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE);
+
+		data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12);
+		data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5);
+		data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT);
+
+		data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT);
+		data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT);
+		data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT);
+		data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE);
+		data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE);
+		data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE);
+		data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN);
+		data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN);
+		data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN);
+		data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE);
+		data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE);
+		data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE);
+
+		data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET);
+		data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE);
+		data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL);
+
+		data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE);
+
+		data->last_updated = jiffies;
+		data->valid = 1;                 
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+
+
+#define FAN_INDEX_FROM_NUM(nr)	((nr) - 1)
+
+static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data,
+			      const char *buf, size_t count, int nr, int reg)
+{
+	/* bits 0..1, 3..7 reserved => mask with 0x04 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04;
+	
+	down(&data->update_lock);
+	data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v;
+	fscher_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 0..1, 3..7 reserved => mask with 0x04 */  
+	return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04);
+}
+
+static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
+		       const char *buf, size_t count, int nr, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v;
+	fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
+}
+
+static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data,
+			   const char *buf, size_t count, int nr, int reg)
+{
+	/* supported values: 2, 4, 8 */
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	switch (v) {
+	case 2: v = 1; break;
+	case 4: v = 2; break;
+	case 8: v = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			 "supported. Choose one of 2, 4 or 8!\n", v);
+		return -EINVAL;
+	}
+
+	down(&data->update_lock);
+
+	/* bits 2..7 reserved => mask with 0x03 */
+	data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03;
+	data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v;
+
+	fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 2..7 reserved => mask with 0x03 */  
+	return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03));
+}
+
+#define RPM_FROM_REG(val)	(val*60)
+
+static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)]));
+}
+
+
+
+#define TEMP_INDEX_FROM_NUM(nr)		((nr) - 1)
+
+static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data,
+			       const char *buf, size_t count, int nr, int reg)
+{
+	/* bits 2..7 reserved, 0 read only => mask with 0x02 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
+
+	down(&data->update_lock);
+	data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v;
+	fscher_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 2..7 reserved => mask with 0x03 */
+	return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03);
+}
+
+#define TEMP_FROM_REG(val)	(((val) - 128) * 1000)
+
+static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)]));
+}
+
+/*
+ * The final conversion is specified in sensors.conf, as it depends on
+ * mainboard specific values. We export the registers contents as
+ * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much
+ * sense per se, but it minimizes the conversions count and keeps the
+ * values within a usual range.
+ */
+#define VOLT_FROM_REG(val)	((val) * 10)
+
+static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr]));
+}
+
+
+
+static ssize_t show_revision(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", data->revision);
+}
+
+
+
+static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 2, 5..6 reserved => mask with 0x9b */
+	return sprintf(buf, "%u\n", data->global_event & 0x9b);
+}
+
+
+
+static ssize_t set_control(struct i2c_client *client, struct fscher_data *data,
+			   const char *buf, size_t count, int nr, int reg)
+{
+	/* bits 1..7 reserved => mask with 0x01 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;
+
+	down(&data->update_lock);
+	data->global_control &= ~v;
+	fscher_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_control(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 1..7 reserved => mask with 0x01 */
+	return sprintf(buf, "%u\n", data->global_control & 0x01);
+}
+
+
+
+static ssize_t set_watchdog_control(struct i2c_client *client, struct
+				    fscher_data *data, const char *buf, size_t count,
+				    int nr, int reg)
+{
+	/* bits 0..3 reserved => mask with 0xf0 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
+
+	down(&data->update_lock);
+	data->watchdog[2] &= ~0xf0;
+	data->watchdog[2] |= v;
+	fscher_write_value(client, reg, data->watchdog[2]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */
+	return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0);
+}
+
+static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data,
+				   const char *buf, size_t count, int nr, int reg)
+{
+	/* bits 0, 2..7 reserved => mask with 0x02 */  
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
+
+	down(&data->update_lock);
+	data->watchdog[1] &= ~v;
+	fscher_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr)
+{
+	/* bits 0, 2..7 reserved => mask with 0x02 */
+	return sprintf(buf, "%u\n", data->watchdog[1] & 0x02);
+}
+
+static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data,
+				   const char *buf, size_t count, int nr, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
+	
+	down(&data->update_lock);
+	data->watchdog[0] = v;
+	fscher_write_value(client, reg, data->watchdog[0]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", data->watchdog[0]);
+}
+
+static int __init sensors_fscher_init(void)
+{
+	return i2c_add_driver(&fscher_driver);
+}
+
+static void __exit sensors_fscher_exit(void)
+{
+	i2c_del_driver(&fscher_driver);
+}
+
+MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>");
+MODULE_DESCRIPTION("FSC Hermes driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_fscher_init);
+module_exit(sensors_fscher_exit);
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
new file mode 100644
index 000000000000..3beaa6191ef4
--- /dev/null
+++ b/drivers/hwmon/fscpos.c
@@ -0,0 +1,641 @@
+/*
+	fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips
+	Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+	fujitsu siemens poseidon chip,
+	module based on the old fscpos module by Hermann Jung <hej@odn.de> and
+	the fscher module by Reinhard Nissl <rnissl@gmx.de>
+
+	original module based on lm80.c
+	Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
+	and Philip Edelbrock <phil@netroedge.com>
+
+	Thanks to Jean Delvare for reviewing my code and suggesting a lot of
+	improvements.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+
+/*
+ * Addresses to scan
+ */
+static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+SENSORS_INSMOD_1(fscpos);
+
+/*
+ * The FSCPOS registers
+ */
+
+/* chip identification */
+#define FSCPOS_REG_IDENT_0		0x00
+#define FSCPOS_REG_IDENT_1		0x01
+#define FSCPOS_REG_IDENT_2		0x02
+#define FSCPOS_REG_REVISION		0x03
+
+/* global control and status */
+#define FSCPOS_REG_EVENT_STATE		0x04
+#define FSCPOS_REG_CONTROL		0x05
+
+/* watchdog */
+#define FSCPOS_REG_WDOG_PRESET		0x28
+#define FSCPOS_REG_WDOG_STATE		0x23
+#define FSCPOS_REG_WDOG_CONTROL		0x21
+
+/* voltages */
+#define FSCPOS_REG_VOLT_12		0x45
+#define FSCPOS_REG_VOLT_5		0x42
+#define FSCPOS_REG_VOLT_BATT		0x48
+
+/* fans - the chip does not support minimum speed for fan2 */
+static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 };
+static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab };
+static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 };
+static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf };
+
+/* temperatures */
+static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 };
+static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 };
+
+/*
+ * Functions declaration
+ */
+static int fscpos_attach_adapter(struct i2c_adapter *adapter);
+static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind);
+static int fscpos_detach_client(struct i2c_client *client);
+
+static int fscpos_read_value(struct i2c_client *client, u8 register);
+static int fscpos_write_value(struct i2c_client *client, u8 register, u8 value);
+static struct fscpos_data *fscpos_update_device(struct device *dev);
+static void fscpos_init_client(struct i2c_client *client);
+
+static void reset_fan_alarm(struct i2c_client *client, int nr);
+
+/*
+ * Driver data (common to all clients)
+ */
+static struct i2c_driver fscpos_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "fscpos",
+	.id		= I2C_DRIVERID_FSCPOS,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= fscpos_attach_adapter,
+	.detach_client	= fscpos_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+struct fscpos_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; 		/* 0 until following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	/* register values */
+	u8 revision;		/* revision of chip */
+	u8 global_event;	/* global event status */
+	u8 global_control;	/* global control register */
+	u8 wdog_control;	/* watchdog control */
+	u8 wdog_state;		/* watchdog status */
+	u8 wdog_preset;		/* watchdog preset */
+	u8 volt[3];		/* 12, 5, battery current */
+	u8 temp_act[3];		/* temperature */
+	u8 temp_status[3];	/* status of sensor */
+	u8 fan_act[3];		/* fans revolutions per second */
+	u8 fan_status[3];	/* fan status */
+	u8 pwm[2];		/* fan min value for rps */
+	u8 fan_ripple[3];	/* divider for rps */
+};
+
+/* Temperature */
+#define TEMP_FROM_REG(val)	(((val) - 128) * 1000)
+
+static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1]));
+}
+
+static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr)
+{
+	/* bits 2..7 reserved => mask with 0x03 */
+	return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03);
+}
+
+static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "1\n");
+}
+
+static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data
+			*data, const char *buf,	size_t count, int nr, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+	if (v != 1) {
+		dev_err(&client->dev, "temp_reset value %ld not supported. "
+					"Use 1 to reset the alarm!\n", v);
+		return -EINVAL;
+	}
+
+	dev_info(&client->dev, "You used the temp_reset feature which has not "
+				"been proplerly tested. Please report your "
+				"experience to the module author.\n");
+
+	/* Supported value: 2 (clears the status) */
+	fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr], 2);
+	return count;
+}
+
+/* Fans */
+#define RPM_FROM_REG(val)	((val) * 60)
+
+static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr)
+{
+	/* bits 0..1, 3..7 reserved => mask with 0x04 */
+	return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04);
+}
+
+static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1]));
+}
+
+static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr)
+{
+	/* bits 2..7 reserved => mask with 0x03 */
+	return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03);
+}
+
+static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data
+			*data, const char *buf,	size_t count, int nr, int reg)
+{
+	/* supported values: 2, 4, 8 */
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	switch (v) {
+		case 2: v = 1; break;
+		case 4: v = 2; break;
+		case 8: v = 3; break;
+	default:
+		dev_err(&client->dev, "fan_ripple value %ld not supported. "
+					"Must be one of 2, 4 or 8!\n", v);
+		return -EINVAL;
+	}
+	
+	down(&data->update_lock);
+	/* bits 2..7 reserved => mask with 0x03 */
+	data->fan_ripple[nr - 1] &= ~0x03;
+	data->fan_ripple[nr - 1] |= v;
+	
+	fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr)
+{
+	return sprintf(buf, "%u\n", data->pwm[nr - 1]);
+}
+
+static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data,
+				const char *buf, size_t count, int nr, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+
+	/* Range: 0..255 */
+	if (v < 0) v = 0;
+	if (v > 255) v = 255;
+
+	down(&data->update_lock);
+	data->pwm[nr - 1] = v;
+	fscpos_write_value(client, reg, data->pwm[nr - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static void reset_fan_alarm(struct i2c_client *client, int nr)
+{
+	fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4);
+}
+
+/* Volts */
+#define VOLT_FROM_REG(val, mult)	((val) * (mult) / 255)
+
+static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct fscpos_data *data = fscpos_update_device(dev);
+	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200));
+}
+
+static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct fscpos_data *data = fscpos_update_device(dev);
+	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600));
+}
+
+static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct fscpos_data *data = fscpos_update_device(dev);
+	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300));
+}
+
+/* Watchdog */
+static ssize_t show_wdog_control(struct fscpos_data *data, char *buf)
+{
+	/* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */
+	return sprintf(buf, "%u\n", data->wdog_control & 0xb0);
+}
+
+static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data
+				*data, const char *buf,	size_t count, int reg)
+{
+	/* bits 0..3 reserved => mask with 0xf0 */
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
+
+	down(&data->update_lock);
+	data->wdog_control &= ~0xf0;
+	data->wdog_control |= v;
+	fscpos_write_value(client, reg, data->wdog_control);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_wdog_state(struct fscpos_data *data, char *buf)
+{
+	/* bits 0, 2..7 reserved => mask with 0x02 */
+	return sprintf(buf, "%u\n", data->wdog_state & 0x02);
+}
+
+static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data
+				*data, const char *buf, size_t count, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
+
+	/* Valid values: 2 (clear) */
+	if (v != 2) {
+		dev_err(&client->dev, "wdog_state value %ld not supported. "
+					"Must be 2 to clear the state!\n", v);
+		return -EINVAL;
+	}
+
+	down(&data->update_lock);
+	data->wdog_state &= ~v;
+	fscpos_write_value(client, reg, v);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf)
+{
+	return sprintf(buf, "%u\n", data->wdog_preset);
+}
+
+static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data
+				*data, const char *buf,	size_t count, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
+
+	down(&data->update_lock);
+	data->wdog_preset = v;
+	fscpos_write_value(client, reg, data->wdog_preset);
+	up(&data->update_lock);
+	return count;
+}
+
+/* Event */
+static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	/* bits 5..7 reserved => mask with 0x1f */
+	struct fscpos_data *data = fscpos_update_device(dev);
+	return sprintf(buf, "%u\n", data->global_event & 0x9b);
+}
+
+/*
+ * Sysfs stuff
+ */
+#define create_getter(kind, sub) \
+	static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \
+	{ \
+		struct fscpos_data *data = fscpos_update_device(dev); \
+		return show_##kind##sub(data, buf); \
+	}
+
+#define create_getter_n(kind, offset, sub) \
+	static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\
+								 	*buf) \
+	{ \
+		struct fscpos_data *data = fscpos_update_device(dev); \
+		return show_##kind##sub(data, buf, offset); \
+	}
+
+#define create_setter(kind, sub, reg) \
+	static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \
+							*buf, size_t count) \
+	{ \
+		struct i2c_client *client = to_i2c_client(dev); \
+		struct fscpos_data *data = i2c_get_clientdata(client); \
+		return set_##kind##sub(client, data, buf, count, reg); \
+	}
+
+#define create_setter_n(kind, offset, sub, reg) \
+	static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \
+					const char *buf, size_t count) \
+	{ \
+		struct i2c_client *client = to_i2c_client(dev); \
+		struct fscpos_data *data = i2c_get_clientdata(client); \
+		return set_##kind##sub(client, data, buf, count, offset, reg);\
+	}
+
+#define create_sysfs_device_ro(kind, sub, offset) \
+	static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \
+					sysfs_show_##kind##offset##sub, NULL);
+
+#define create_sysfs_device_rw(kind, sub, offset) \
+	static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \
+		sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub);
+
+#define sysfs_ro_n(kind, sub, offset) \
+	create_getter_n(kind, offset, sub); \
+	create_sysfs_device_ro(kind, sub, offset);
+
+#define sysfs_rw_n(kind, sub, offset, reg) \
+	create_getter_n(kind, offset, sub); \
+	create_setter_n(kind, offset, sub, reg); \
+	create_sysfs_device_rw(kind, sub, offset);
+
+#define sysfs_rw(kind, sub, reg) \
+	create_getter(kind, sub); \
+	create_setter(kind, sub, reg); \
+	create_sysfs_device_rw(kind, sub,);
+
+#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \
+	sysfs_fan(offset, reg_status, reg_ripple); \
+	sysfs_rw_n(pwm,, offset, reg_min);
+
+#define sysfs_fan(offset, reg_status, reg_ripple) \
+	sysfs_ro_n(fan, _input, offset); \
+	sysfs_ro_n(fan, _status, offset); \
+	sysfs_rw_n(fan, _ripple, offset, reg_ripple);
+
+#define sysfs_temp(offset, reg_status) \
+	sysfs_ro_n(temp, _input, offset); \
+	sysfs_ro_n(temp, _status, offset); \
+	sysfs_rw_n(temp, _reset, offset, reg_status);
+
+#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \
+	sysfs_rw(wdog, _control, reg_wdog_control); \
+	sysfs_rw(wdog, _preset, reg_wdog_preset); \
+	sysfs_rw(wdog, _state, reg_wdog_state);
+
+sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0],
+							FSCPOS_REG_PWM[0]);
+sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1],
+							FSCPOS_REG_PWM[1]);
+sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]);
+
+sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]);
+sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]);
+sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]);
+
+sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE,
+						FSCPOS_REG_WDOG_CONTROL);
+
+static DEVICE_ATTR(event, S_IRUGO, show_event, NULL);
+static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL);
+static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL);
+static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL);
+
+static int fscpos_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, fscpos_detect);
+}
+
+int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct fscpos_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	/*
+	 * OK. For now, we presume we have a valid client. We now create the
+	 * client structure, even though we cannot fill it completely yet.
+	 * But it allows us to access fscpos_{read,write}_value.
+	 */
+
+	if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct fscpos_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &fscpos_driver;
+	new_client->flags = 0;
+
+	/* Do the remaining detection unless force or force_fscpos parameter */
+	if (kind < 0) {
+		if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0)
+			!= 0x50) /* 'P' */
+		|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1)
+			!= 0x45) /* 'E' */
+		|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
+			!= 0x47))/* 'G' */
+		{
+			dev_dbg(&new_client->dev, "fscpos detection failed\n");
+			goto exit_free;
+		}
+	}
+
+	/* Fill in the remaining client fields and put it in the global list */
+	strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE);
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Inizialize the fscpos chip */
+	fscpos_init_client(new_client);
+
+	/* Announce that the chip was found */
+	dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_event);
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_wdog_control);
+	device_create_file(&new_client->dev, &dev_attr_wdog_preset);
+	device_create_file(&new_client->dev, &dev_attr_wdog_state);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_status);
+	device_create_file(&new_client->dev, &dev_attr_temp1_reset);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_status);
+	device_create_file(&new_client->dev, &dev_attr_temp2_reset);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_status);
+	device_create_file(&new_client->dev, &dev_attr_temp3_reset);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_status);
+	device_create_file(&new_client->dev, &dev_attr_fan1_ripple);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_status);
+	device_create_file(&new_client->dev, &dev_attr_fan2_ripple);
+	device_create_file(&new_client->dev, &dev_attr_pwm2);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_status);
+	device_create_file(&new_client->dev, &dev_attr_fan3_ripple);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int fscpos_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, client"
+							" not detached.\n");
+		return err;
+	}
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static int fscpos_read_value(struct i2c_client *client, u8 reg)
+{
+	dev_dbg(&client->dev, "Read reg 0x%02x\n", reg);
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value);
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Called when we have found a new FSCPOS chip */
+static void fscpos_init_client(struct i2c_client *client)
+{
+	struct fscpos_data *data = i2c_get_clientdata(client);
+
+	/* read revision from chip */
+	data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION);
+}
+
+static struct fscpos_data *fscpos_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct fscpos_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > 2 * HZ) ||
+			(jiffies < data->last_updated) || !data->valid) {
+		int i;
+
+		dev_dbg(&client->dev, "Starting fscpos update\n");
+
+		for (i = 0; i < 3; i++) {
+			data->temp_act[i] = fscpos_read_value(client,
+						FSCPOS_REG_TEMP_ACT[i]);
+			data->temp_status[i] = fscpos_read_value(client,
+						FSCPOS_REG_TEMP_STATE[i]);
+			data->fan_act[i] = fscpos_read_value(client,
+						FSCPOS_REG_FAN_ACT[i]);
+			data->fan_status[i] = fscpos_read_value(client,
+						FSCPOS_REG_FAN_STATE[i]);
+			data->fan_ripple[i] = fscpos_read_value(client,
+						FSCPOS_REG_FAN_RIPPLE[i]);
+			if (i < 2) {
+				/* fan2_min is not supported by the chip */
+				data->pwm[i] = fscpos_read_value(client,
+							FSCPOS_REG_PWM[i]);
+			}
+			/* reset fan status if speed is back to > 0 */
+			if (data->fan_status[i] != 0 && data->fan_act[i] > 0) {
+				reset_fan_alarm(client, i);
+			}
+		}
+
+		data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12);
+		data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5);
+		data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT);
+
+		data->wdog_preset = fscpos_read_value(client,
+							FSCPOS_REG_WDOG_PRESET);
+		data->wdog_state = fscpos_read_value(client,
+							FSCPOS_REG_WDOG_STATE);
+		data->wdog_control = fscpos_read_value(client,
+						FSCPOS_REG_WDOG_CONTROL);
+
+		data->global_event = fscpos_read_value(client,
+						FSCPOS_REG_EVENT_STATE);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+	up(&data->update_lock);
+	return data;
+}
+
+static int __init sm_fscpos_init(void)
+{
+	return i2c_add_driver(&fscpos_driver);
+}
+
+static void __exit sm_fscpos_exit(void)
+{
+	i2c_del_driver(&fscpos_driver);
+}
+
+MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung "
+				"<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>"
+				" and Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver");
+MODULE_LICENSE("GPL");
+
+module_init(sm_fscpos_init);
+module_exit(sm_fscpos_exit);
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
new file mode 100644
index 000000000000..6bedf729dcf5
--- /dev/null
+++ b/drivers/hwmon/gl518sm.c
@@ -0,0 +1,604 @@
+/*
+ * gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
+ *             monitoring
+ * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
+ * Kyosti Malkki <kmalkki@cc.hut.fi>
+ * Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
+ * Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
+ * and advice of Greg Kroah-Hartman.
+ *
+ * Notes about the port:
+ * Release 0x00 of the GL518SM chipset doesn't support reading of in0,
+ * in1 nor in2. The original driver had an ugly workaround to get them
+ * anyway (changing limits and watching alarms trigger and wear off).
+ * We did not keep that part of the original driver in the Linux 2.6
+ * version, since it was making the driver significantly more complex
+ * with no real benefit.
+ *
+ * History:
+ * 2004-01-28  Original port. (Hong-Gunn Chew)
+ * 2004-01-31  Code review and approval. (Jean Delvare)
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80);
+
+/* Many GL518 constants specified below */
+
+/* The GL518 registers */
+#define GL518_REG_CHIP_ID	0x00
+#define GL518_REG_REVISION	0x01
+#define GL518_REG_VENDOR_ID	0x02
+#define GL518_REG_CONF		0x03
+#define GL518_REG_TEMP_IN	0x04
+#define GL518_REG_TEMP_MAX	0x05
+#define GL518_REG_TEMP_HYST	0x06
+#define GL518_REG_FAN_COUNT	0x07
+#define GL518_REG_FAN_LIMIT	0x08
+#define GL518_REG_VIN1_LIMIT	0x09
+#define GL518_REG_VIN2_LIMIT	0x0a
+#define GL518_REG_VIN3_LIMIT	0x0b
+#define GL518_REG_VDD_LIMIT	0x0c
+#define GL518_REG_VIN3		0x0d
+#define GL518_REG_MISC		0x0f
+#define GL518_REG_ALARM		0x10
+#define GL518_REG_MASK		0x11
+#define GL518_REG_INT		0x12
+#define GL518_REG_VIN2		0x13
+#define GL518_REG_VIN1		0x14
+#define GL518_REG_VDD		0x15
+
+
+/*
+ * Conversions. Rounding and limit checking is only done on the TO_REG
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ * Fixing this is just not worth it.
+ */
+
+#define RAW_FROM_REG(val)	val
+
+#define BOOL_FROM_REG(val)	((val)?0:1)
+#define BOOL_TO_REG(val)	((val)?0:1)
+
+#define TEMP_TO_REG(val)	(SENSORS_LIMIT(((((val)<0? \
+				(val)-500:(val)+500)/1000)+119),0,255))
+#define TEMP_FROM_REG(val)	(((val) - 119) * 1000)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	long rpmdiv;
+	if (rpm == 0)
+		return 0;
+	rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div;
+	return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255);
+}
+#define FAN_FROM_REG(val,div)	((val)==0 ? 0 : (960000/((val)*(div))))
+
+#define IN_TO_REG(val)		(SENSORS_LIMIT((((val)+9)/19),0,255))
+#define IN_FROM_REG(val)	((val)*19)
+
+#define VDD_TO_REG(val)		(SENSORS_LIMIT((((val)*4+47)/95),0,255))
+#define VDD_FROM_REG(val)	(((val)*95+2)/4)
+
+#define DIV_TO_REG(val)		((val)==4?2:(val)==2?1:(val)==1?0:3)
+#define DIV_FROM_REG(val)	(1 << (val))
+
+#define BEEP_MASK_TO_REG(val)	((val) & 0x7f & data->alarm_mask)
+#define BEEP_MASK_FROM_REG(val)	((val) & 0x7f)
+
+/* Each client has this additional data */
+struct gl518_data {
+	struct i2c_client client;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 voltage_in[4];	/* Register values; [0] = VDD */
+	u8 voltage_min[4];	/* Register values; [0] = VDD */
+	u8 voltage_max[4];	/* Register values; [0] = VDD */
+	u8 iter_voltage_in[4];	/* Register values; [0] = VDD */
+	u8 fan_in[2];
+	u8 fan_min[2];
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u8 fan_auto1;		/* Boolean */
+	u8 temp_in;		/* Register values */
+	u8 temp_max;		/* Register values */
+	u8 temp_hyst;		/* Register values */
+	u8 alarms;		/* Register value */
+	u8 alarm_mask;		/* Register value */
+	u8 beep_mask;		/* Register value */
+	u8 beep_enable;		/* Boolean */
+};
+
+static int gl518_attach_adapter(struct i2c_adapter *adapter);
+static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
+static void gl518_init_client(struct i2c_client *client);
+static int gl518_detach_client(struct i2c_client *client);
+static int gl518_read_value(struct i2c_client *client, u8 reg);
+static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
+static struct gl518_data *gl518_update_device(struct device *dev);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver gl518_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "gl518sm",
+	.id		= I2C_DRIVERID_GL518,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= gl518_attach_adapter,
+	.detach_client	= gl518_detach_client,
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show(type, suffix, value)					\
+static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	struct gl518_data *data = gl518_update_device(dev);		\
+	return sprintf(buf, "%d\n", type##_FROM_REG(data->value));	\
+}
+
+#define show_fan(suffix, value, index)					\
+static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	struct gl518_data *data = gl518_update_device(dev);		\
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[index],	\
+		DIV_FROM_REG(data->fan_div[index])));			\
+}
+
+show(TEMP, temp_input1, temp_in);
+show(TEMP, temp_max1, temp_max);
+show(TEMP, temp_hyst1, temp_hyst);
+show(BOOL, fan_auto1, fan_auto1);
+show_fan(fan_input1, fan_in, 0);
+show_fan(fan_input2, fan_in, 1);
+show_fan(fan_min1, fan_min, 0);
+show_fan(fan_min2, fan_min, 1);
+show(DIV, fan_div1, fan_div[0]);
+show(DIV, fan_div2, fan_div[1]);
+show(VDD, in_input0, voltage_in[0]);
+show(IN, in_input1, voltage_in[1]);
+show(IN, in_input2, voltage_in[2]);
+show(IN, in_input3, voltage_in[3]);
+show(VDD, in_min0, voltage_min[0]);
+show(IN, in_min1, voltage_min[1]);
+show(IN, in_min2, voltage_min[2]);
+show(IN, in_min3, voltage_min[3]);
+show(VDD, in_max0, voltage_max[0]);
+show(IN, in_max1, voltage_max[1]);
+show(IN, in_max2, voltage_max[2]);
+show(IN, in_max3, voltage_max[3]);
+show(RAW, alarms, alarms);
+show(BOOL, beep_enable, beep_enable);
+show(BEEP_MASK, beep_mask, beep_mask);
+
+#define set(type, suffix, value, reg)					\
+static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf,	\
+	size_t count)							\
+{									\
+	struct i2c_client *client = to_i2c_client(dev);			\
+	struct gl518_data *data = i2c_get_clientdata(client);		\
+	long val = simple_strtol(buf, NULL, 10);			\
+									\
+	down(&data->update_lock);					\
+	data->value = type##_TO_REG(val);				\
+	gl518_write_value(client, reg, data->value);			\
+	up(&data->update_lock);						\
+	return count;							\
+}
+
+#define set_bits(type, suffix, value, reg, mask, shift)			\
+static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf,	\
+	size_t count)							\
+{									\
+	struct i2c_client *client = to_i2c_client(dev);			\
+	struct gl518_data *data = i2c_get_clientdata(client);		\
+	int regvalue;							\
+	unsigned long val = simple_strtoul(buf, NULL, 10);		\
+									\
+	down(&data->update_lock);					\
+	regvalue = gl518_read_value(client, reg);			\
+	data->value = type##_TO_REG(val);				\
+	regvalue = (regvalue & ~mask) | (data->value << shift);		\
+	gl518_write_value(client, reg, regvalue);			\
+	up(&data->update_lock);						\
+	return count;							\
+}
+
+#define set_low(type, suffix, value, reg)				\
+	set_bits(type, suffix, value, reg, 0x00ff, 0)
+#define set_high(type, suffix, value, reg)				\
+	set_bits(type, suffix, value, reg, 0xff00, 8)
+
+set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
+set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
+set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
+set_bits(DIV, fan_div1, fan_div[0], GL518_REG_MISC, 0xc0, 6);
+set_bits(DIV, fan_div2, fan_div[1], GL518_REG_MISC, 0x30, 4);
+set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
+set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
+set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
+set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
+set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
+set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
+set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
+set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
+set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
+set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
+
+static ssize_t set_fan_min1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gl518_data *data = i2c_get_clientdata(client);
+	int regvalue;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
+	data->fan_min[0] = FAN_TO_REG(val,
+		DIV_FROM_REG(data->fan_div[0]));
+	regvalue = (regvalue & 0x00ff) | (data->fan_min[0] << 8);
+	gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
+
+	data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
+	if (data->fan_min[0] == 0)
+		data->alarm_mask &= ~0x20;
+	else
+		data->alarm_mask |= 0x20;
+	data->beep_mask &= data->alarm_mask;
+	gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
+
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_fan_min2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gl518_data *data = i2c_get_clientdata(client);
+	int regvalue;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
+	data->fan_min[1] = FAN_TO_REG(val,
+		DIV_FROM_REG(data->fan_div[1]));
+	regvalue = (regvalue & 0xff00) | data->fan_min[1];
+	gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
+
+	data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
+	if (data->fan_min[1] == 0)
+		data->alarm_mask &= ~0x40;
+	else
+		data->alarm_mask |= 0x40;
+	data->beep_mask &= data->alarm_mask;
+	gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
+
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
+	show_temp_hyst1, set_temp_hyst1);
+static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
+static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
+static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1);
+static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2);
+static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1);
+static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2);
+static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
+static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
+static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
+static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
+static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
+static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
+static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
+static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
+static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
+static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
+static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
+static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
+	show_beep_enable, set_beep_enable);
+static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
+	show_beep_mask, set_beep_mask);
+
+/*
+ * Real code
+ */
+
+static int gl518_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, gl518_detect);
+}
+
+static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct gl518_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access gl518_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct gl518_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &gl518_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	if (kind < 0) {
+		if ((gl518_read_value(new_client, GL518_REG_CHIP_ID) != 0x80)
+		 || (gl518_read_value(new_client, GL518_REG_CONF) & 0x80))
+			goto exit_free;
+	}
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		i = gl518_read_value(new_client, GL518_REG_REVISION);
+		if (i == 0x00) {
+			kind = gl518sm_r00;
+		} else if (i == 0x80) {
+			kind = gl518sm_r80;
+		} else {
+			if (kind <= 0)
+				dev_info(&adapter->dev,
+				    "Ignoring 'force' parameter for unknown "
+				    "chip at adapter %d, address 0x%02x\n",
+				    i2c_adapter_id(adapter), address);
+			goto exit_free;
+		}
+	}
+
+	/* Fill in the remaining client fields */
+	strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the GL518SM chip */
+	data->alarm_mask = 0xff;
+	data->voltage_in[0]=data->voltage_in[1]=data->voltage_in[2]=0;
+	gl518_init_client((struct i2c_client *) new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_fan1_auto);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_beep_enable);
+	device_create_file(&new_client->dev, &dev_attr_beep_mask);
+
+	return 0;
+
+/* OK, this is not exactly good programming practice, usually. But it is
+   very code-efficient in this case. */
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+
+/* Called when we have found a new GL518SM.
+   Note that we preserve D4:NoFan2 and D2:beep_enable. */
+static void gl518_init_client(struct i2c_client *client)
+{
+	/* Make sure we leave D7:Reset untouched */
+	u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
+
+	/* Comparator mode (D3=0), standby mode (D6=0) */
+	gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
+
+	/* Never interrupts */
+	gl518_write_value(client, GL518_REG_MASK, 0x00);
+
+	/* Clear status register (D5=1), start (D6=1) */
+	gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
+	gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
+}
+
+static int gl518_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+/* Registers 0x07 to 0x0c are word-sized, others are byte-sized 
+   GL518 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int gl518_read_value(struct i2c_client *client, u8 reg)
+{
+	if ((reg >= 0x07) && (reg <= 0x0c))
+		return swab16(i2c_smbus_read_word_data(client, reg));
+	else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* Registers 0x07 to 0x0c are word-sized, others are byte-sized 
+   GL518 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if ((reg >= 0x07) && (reg <= 0x0c))
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+	else
+		return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static struct gl518_data *gl518_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gl518_data *data = i2c_get_clientdata(client);
+	int val;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(&client->dev, "Starting gl518 update\n");
+
+		data->alarms = gl518_read_value(client, GL518_REG_INT);
+		data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
+
+		val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
+		data->voltage_min[0] = val & 0xff;
+		data->voltage_max[0] = (val >> 8) & 0xff;
+		val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
+		data->voltage_min[1] = val & 0xff;
+		data->voltage_max[1] = (val >> 8) & 0xff;
+		val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
+		data->voltage_min[2] = val & 0xff;
+		data->voltage_max[2] = (val >> 8) & 0xff;
+		val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
+		data->voltage_min[3] = val & 0xff;
+		data->voltage_max[3] = (val >> 8) & 0xff;
+
+		val = gl518_read_value(client, GL518_REG_FAN_COUNT);
+		data->fan_in[0] = (val >> 8) & 0xff;
+		data->fan_in[1] = val & 0xff;
+
+		val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
+		data->fan_min[0] = (val >> 8) & 0xff;
+		data->fan_min[1] = val & 0xff;
+
+		data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
+		data->temp_max =
+		    gl518_read_value(client, GL518_REG_TEMP_MAX);
+		data->temp_hyst =
+		    gl518_read_value(client, GL518_REG_TEMP_HYST);
+
+		val = gl518_read_value(client, GL518_REG_MISC);
+		data->fan_div[0] = (val >> 6) & 0x03;
+		data->fan_div[1] = (val >> 4) & 0x03;
+		data->fan_auto1  = (val >> 3) & 0x01;
+
+		data->alarms &= data->alarm_mask;
+
+		val = gl518_read_value(client, GL518_REG_CONF);
+		data->beep_enable = (val >> 2) & 1;
+
+		if (data->type != gl518sm_r00) {
+			data->voltage_in[0] =
+			    gl518_read_value(client, GL518_REG_VDD);
+			data->voltage_in[1] =
+			    gl518_read_value(client, GL518_REG_VIN1);
+			data->voltage_in[2] =
+			    gl518_read_value(client, GL518_REG_VIN2);
+		}
+		data->voltage_in[3] =
+		    gl518_read_value(client, GL518_REG_VIN3);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_gl518sm_init(void)
+{
+	return i2c_add_driver(&gl518_driver);
+}
+
+static void __exit sensors_gl518sm_exit(void)
+{
+	i2c_del_driver(&gl518_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	"Kyosti Malkki <kmalkki@cc.hut.fi> and "
+	"Hong-Gunn Chew <hglinux@gunnet.org>");
+MODULE_DESCRIPTION("GL518SM driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_gl518sm_init);
+module_exit(sensors_gl518sm_exit);
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
new file mode 100644
index 000000000000..a13a504f5bfa
--- /dev/null
+++ b/drivers/hwmon/gl520sm.c
@@ -0,0 +1,769 @@
+/*
+    gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
+                              Kyösti Mälkki <kmalkki@cc.hut.fi>
+    Copyright (c) 2005        Maarten Deprez <maartendeprez@users.sourceforge.net>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/* Type of the extra sensor */
+static unsigned short extra_sensor_type;
+module_param(extra_sensor_type, ushort, 0);
+MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)");
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(gl520sm);
+
+/* Many GL520 constants specified below 
+One of the inputs can be configured as either temp or voltage.
+That's why _TEMP2 and _IN4 access the same register 
+*/
+
+/* The GL520 registers */
+#define GL520_REG_CHIP_ID		0x00
+#define GL520_REG_REVISION		0x01
+#define GL520_REG_CONF			0x03
+#define GL520_REG_MASK			0x11
+
+#define GL520_REG_VID_INPUT		0x02
+
+#define GL520_REG_IN0_INPUT		0x15
+#define GL520_REG_IN0_LIMIT		0x0c
+#define GL520_REG_IN0_MIN		GL520_REG_IN0_LIMIT
+#define GL520_REG_IN0_MAX		GL520_REG_IN0_LIMIT
+
+#define GL520_REG_IN1_INPUT		0x14
+#define GL520_REG_IN1_LIMIT		0x09
+#define GL520_REG_IN1_MIN		GL520_REG_IN1_LIMIT
+#define GL520_REG_IN1_MAX		GL520_REG_IN1_LIMIT
+
+#define GL520_REG_IN2_INPUT		0x13
+#define GL520_REG_IN2_LIMIT		0x0a
+#define GL520_REG_IN2_MIN		GL520_REG_IN2_LIMIT
+#define GL520_REG_IN2_MAX		GL520_REG_IN2_LIMIT
+
+#define GL520_REG_IN3_INPUT		0x0d
+#define GL520_REG_IN3_LIMIT		0x0b
+#define GL520_REG_IN3_MIN		GL520_REG_IN3_LIMIT
+#define GL520_REG_IN3_MAX		GL520_REG_IN3_LIMIT
+
+#define GL520_REG_IN4_INPUT		0x0e
+#define GL520_REG_IN4_MAX		0x17
+#define GL520_REG_IN4_MIN		0x18
+
+#define GL520_REG_TEMP1_INPUT		0x04
+#define GL520_REG_TEMP1_MAX		0x05
+#define GL520_REG_TEMP1_MAX_HYST	0x06
+
+#define GL520_REG_TEMP2_INPUT		0x0e
+#define GL520_REG_TEMP2_MAX		0x17
+#define GL520_REG_TEMP2_MAX_HYST	0x18
+
+#define GL520_REG_FAN_INPUT		0x07
+#define GL520_REG_FAN_MIN		0x08
+#define GL520_REG_FAN_DIV		0x0f
+#define GL520_REG_FAN_OFF		GL520_REG_FAN_DIV
+
+#define GL520_REG_ALARMS		0x12
+#define GL520_REG_BEEP_MASK		0x10
+#define GL520_REG_BEEP_ENABLE		GL520_REG_CONF
+
+/*
+ * Function declarations
+ */
+
+static int gl520_attach_adapter(struct i2c_adapter *adapter);
+static int gl520_detect(struct i2c_adapter *adapter, int address, int kind);
+static void gl520_init_client(struct i2c_client *client);
+static int gl520_detach_client(struct i2c_client *client);
+static int gl520_read_value(struct i2c_client *client, u8 reg);
+static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
+static struct gl520_data *gl520_update_device(struct device *dev);
+
+/* Driver data */
+static struct i2c_driver gl520_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "gl520sm",
+	.id		= I2C_DRIVERID_GL520,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= gl520_attach_adapter,
+	.detach_client	= gl520_detach_client,
+};
+
+/* Client data */
+struct gl520_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;		/* zero until the following fields are valid */
+	unsigned long last_updated;	/* in jiffies */
+
+	u8 vid;
+	u8 vrm;
+	u8 in_input[5];		/* [0] = VVD */
+	u8 in_min[5];		/* [0] = VDD */
+	u8 in_max[5];		/* [0] = VDD */
+	u8 fan_input[2];
+	u8 fan_min[2];
+	u8 fan_div[2];
+	u8 fan_off;
+	u8 temp_input[2];
+	u8 temp_max[2];
+	u8 temp_max_hyst[2];
+	u8 alarms;
+	u8 beep_enable;
+	u8 beep_mask;
+	u8 alarm_mask;
+	u8 two_temps;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define sysfs_r(type, n, item, reg) \
+static ssize_t get_##type##item (struct gl520_data *, char *, int); \
+static ssize_t get_##type##n##item (struct device *, struct device_attribute *attr, char *); \
+static ssize_t get_##type##n##item (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct gl520_data *data = gl520_update_device(dev); \
+	return get_##type##item(data, buf, (n)); \
+}
+
+#define sysfs_w(type, n, item, reg) \
+static ssize_t set_##type##item (struct i2c_client *, struct gl520_data *, const char *, size_t, int, int); \
+static ssize_t set_##type##n##item (struct device *, struct device_attribute *attr, const char *, size_t); \
+static ssize_t set_##type##n##item (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct gl520_data *data = i2c_get_clientdata(client); \
+	return set_##type##item(client, data, buf, count, (n), reg); \
+}
+
+#define sysfs_rw_n(type, n, item, reg) \
+sysfs_r(type, n, item, reg) \
+sysfs_w(type, n, item, reg) \
+static DEVICE_ATTR(type##n##item, S_IRUGO | S_IWUSR, get_##type##n##item, set_##type##n##item);
+
+#define sysfs_ro_n(type, n, item, reg) \
+sysfs_r(type, n, item, reg) \
+static DEVICE_ATTR(type##n##item, S_IRUGO, get_##type##n##item, NULL);
+
+#define sysfs_rw(type, item, reg) \
+sysfs_r(type, 0, item, reg) \
+sysfs_w(type, 0, item, reg) \
+static DEVICE_ATTR(type##item, S_IRUGO | S_IWUSR, get_##type##0##item, set_##type##0##item);
+
+#define sysfs_ro(type, item, reg) \
+sysfs_r(type, 0, item, reg) \
+static DEVICE_ATTR(type##item, S_IRUGO, get_##type##0##item, NULL);
+
+
+#define sysfs_vid(n) \
+sysfs_ro_n(cpu, n, _vid, GL520_REG_VID_INPUT)
+
+#define device_create_file_vid(client, n) \
+device_create_file(&client->dev, &dev_attr_cpu##n##_vid)
+
+#define sysfs_in(n) \
+sysfs_ro_n(in, n, _input, GL520_REG_IN##n##INPUT) \
+sysfs_rw_n(in, n, _min, GL520_REG_IN##n##_MIN) \
+sysfs_rw_n(in, n, _max, GL520_REG_IN##n##_MAX) \
+
+#define device_create_file_in(client, n) \
+({device_create_file(&client->dev, &dev_attr_in##n##_input); \
+device_create_file(&client->dev, &dev_attr_in##n##_min); \
+device_create_file(&client->dev, &dev_attr_in##n##_max);})
+
+#define sysfs_fan(n) \
+sysfs_ro_n(fan, n, _input, GL520_REG_FAN_INPUT) \
+sysfs_rw_n(fan, n, _min, GL520_REG_FAN_MIN) \
+sysfs_rw_n(fan, n, _div, GL520_REG_FAN_DIV)
+
+#define device_create_file_fan(client, n) \
+({device_create_file(&client->dev, &dev_attr_fan##n##_input); \
+device_create_file(&client->dev, &dev_attr_fan##n##_min); \
+device_create_file(&client->dev, &dev_attr_fan##n##_div);})
+
+#define sysfs_fan_off(n) \
+sysfs_rw_n(fan, n, _off, GL520_REG_FAN_OFF) \
+
+#define device_create_file_fan_off(client, n) \
+device_create_file(&client->dev, &dev_attr_fan##n##_off)
+
+#define sysfs_temp(n) \
+sysfs_ro_n(temp, n, _input, GL520_REG_TEMP##n##_INPUT) \
+sysfs_rw_n(temp, n, _max, GL520_REG_TEMP##n##_MAX) \
+sysfs_rw_n(temp, n, _max_hyst, GL520_REG_TEMP##n##_MAX_HYST)
+
+#define device_create_file_temp(client, n) \
+({device_create_file(&client->dev, &dev_attr_temp##n##_input); \
+device_create_file(&client->dev, &dev_attr_temp##n##_max); \
+device_create_file(&client->dev, &dev_attr_temp##n##_max_hyst);})
+
+#define sysfs_alarms() \
+sysfs_ro(alarms, , GL520_REG_ALARMS) \
+sysfs_rw(beep_enable, , GL520_REG_BEEP_ENABLE) \
+sysfs_rw(beep_mask, , GL520_REG_BEEP_MASK)
+
+#define device_create_file_alarms(client) \
+({device_create_file(&client->dev, &dev_attr_alarms); \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask);})
+
+
+sysfs_vid(0)
+
+sysfs_in(0)
+sysfs_in(1)
+sysfs_in(2)
+sysfs_in(3)
+sysfs_in(4)
+
+sysfs_fan(1)
+sysfs_fan(2)
+sysfs_fan_off(1)
+
+sysfs_temp(1)
+sysfs_temp(2)
+
+sysfs_alarms()
+
+
+static ssize_t get_cpu_vid(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
+}
+
+#define VDD_FROM_REG(val) (((val)*95+2)/4)
+#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255))
+
+#define IN_FROM_REG(val) ((val)*19)
+#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255))
+
+static ssize_t get_in_input(struct gl520_data *data, char *buf, int n)
+{
+	u8 r = data->in_input[n];
+
+	if (n == 0)
+		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+	else
+		return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t get_in_min(struct gl520_data *data, char *buf, int n)
+{
+	u8 r = data->in_min[n];
+
+	if (n == 0)
+		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+	else
+		return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t get_in_max(struct gl520_data *data, char *buf, int n)
+{
+	u8 r = data->in_max[n];
+
+	if (n == 0)
+		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+	else
+		return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t set_in_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	long v = simple_strtol(buf, NULL, 10);
+	u8 r;
+
+	down(&data->update_lock);
+
+	if (n == 0)
+		r = VDD_TO_REG(v);
+	else
+		r = IN_TO_REG(v);
+
+	data->in_min[n] = r;
+
+	if (n < 4)
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r);
+	else
+		gl520_write_value(client, reg, r);
+
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	long v = simple_strtol(buf, NULL, 10);
+	u8 r;
+
+	if (n == 0)
+		r = VDD_TO_REG(v);
+	else
+		r = IN_TO_REG(v);
+
+	down(&data->update_lock);
+
+	data->in_max[n] = r;
+
+	if (n < 4)
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8));
+	else
+		gl520_write_value(client, reg, r);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define DIV_FROM_REG(val) (1 << (val))
+#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (480000/((val) << (div))))
+#define FAN_TO_REG(val,div) ((val)<=0?0:SENSORS_LIMIT((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, 255));
+
+static ssize_t get_fan_input(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n - 1], data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_min(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n - 1], data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_div(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_off(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", data->fan_off);
+}
+
+static ssize_t set_fan_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+	u8 r;
+
+	down(&data->update_lock);
+	r = FAN_TO_REG(v, data->fan_div[n - 1]);
+	data->fan_min[n - 1] = r;
+
+	if (n == 1)
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8));
+	else
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r);
+
+	data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
+	if (data->fan_min[n - 1] == 0)
+		data->alarm_mask &= (n == 1) ? ~0x20 : ~0x40;
+	else
+		data->alarm_mask |= (n == 1) ? 0x20 : 0x40;
+	data->beep_mask &= data->alarm_mask;
+	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
+
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_fan_div(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	unsigned long v = simple_strtoul(buf, NULL, 10);
+	u8 r;
+
+	switch (v) {
+	case 1: r = 0; break;
+	case 2: r = 1; break;
+	case 4: r = 2; break;
+	case 8: r = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v);
+		return -EINVAL;
+	}
+
+	down(&data->update_lock);
+	data->fan_div[n - 1] = r;
+
+	if (n == 1)
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xc0) | (r << 6));
+	else
+		gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4));
+
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_fan_off(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	u8 r = simple_strtoul(buf, NULL, 10)?1:0;
+
+	down(&data->update_lock);
+	data->fan_off = r;
+	gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2));
+	up(&data->update_lock);
+	return count;
+}
+
+#define TEMP_FROM_REG(val) (((val) - 130) * 1000)
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0?(val)-500:(val)+500) / 1000)+130),0,255))
+
+static ssize_t get_temp_input(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n - 1]));
+}
+
+static ssize_t get_temp_max(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n - 1]));
+}
+
+static ssize_t get_temp_max_hyst(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n - 1]));
+}
+
+static ssize_t set_temp_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	long v = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_max[n - 1] = TEMP_TO_REG(v);;
+	gl520_write_value(client, reg, data->temp_max[n - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_temp_max_hyst(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	long v = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_max_hyst[n - 1] = TEMP_TO_REG(v);
+	gl520_write_value(client, reg, data->temp_max_hyst[n - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t get_alarms(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static ssize_t get_beep_enable(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", data->beep_enable);
+}
+
+static ssize_t get_beep_mask(struct gl520_data *data, char *buf, int n)
+{
+	return sprintf(buf, "%d\n", data->beep_mask);
+}
+
+static ssize_t set_beep_enable(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	u8 r = simple_strtoul(buf, NULL, 10)?0:1;
+
+	down(&data->update_lock);
+	data->beep_enable = !r;
+	gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_beep_mask(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+	u8 r = simple_strtoul(buf, NULL, 10);
+	
+	down(&data->update_lock);
+	r &= data->alarm_mask;
+	data->beep_mask = r;
+	gl520_write_value(client, reg, r);
+	up(&data->update_lock);
+	return count;
+}
+
+
+/*
+ * Real code
+ */
+
+static int gl520_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, gl520_detect);
+}
+
+static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct gl520_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access gl520_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct gl520_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &gl520_driver;
+	new_client->flags = 0;
+
+	/* Determine the chip type. */
+	if (kind < 0) {
+		if ((gl520_read_value(new_client, GL520_REG_CHIP_ID) != 0x20) ||
+		    ((gl520_read_value(new_client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
+		    ((gl520_read_value(new_client, GL520_REG_CONF) & 0x80) != 0x00)) {
+			dev_dbg(&new_client->dev, "Unknown chip type, skipping\n");
+			goto exit_free;
+		}
+	}
+
+	/* Fill in the remaining client fields */
+	strlcpy(new_client->name, "gl520sm", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the GL520SM chip */
+	gl520_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file_vid(new_client, 0);
+
+	device_create_file_in(new_client, 0);
+	device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	if (!data->two_temps)
+		device_create_file_in(new_client, 4);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan_off(new_client, 1);
+
+	device_create_file_temp(new_client, 1);
+	if (data->two_temps)
+		device_create_file_temp(new_client, 2);
+
+	device_create_file_alarms(new_client);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+
+/* Called when we have found a new GL520SM. */
+static void gl520_init_client(struct i2c_client *client)
+{
+	struct gl520_data *data = i2c_get_clientdata(client);
+	u8 oldconf, conf;
+
+	conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
+
+	data->alarm_mask = 0xff;
+	data->vrm = i2c_which_vrm();
+
+	if (extra_sensor_type == 1)
+		conf &= ~0x10;
+	else if (extra_sensor_type == 2)
+		conf |= 0x10;
+	data->two_temps = !(conf & 0x10);
+
+	/* If IRQ# is disabled, we can safely force comparator mode */
+	if (!(conf & 0x20))
+		conf &= 0xf7;
+
+	/* Enable monitoring if needed */
+	conf |= 0x40;
+
+	if (conf != oldconf)
+		gl520_write_value(client, GL520_REG_CONF, conf);
+
+	gl520_update_device(&(client->dev));
+
+	if (data->fan_min[0] == 0)
+		data->alarm_mask &= ~0x20;
+	if (data->fan_min[1] == 0)
+		data->alarm_mask &= ~0x40;
+
+	data->beep_mask &= data->alarm_mask;
+	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
+}
+
+static int gl520_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+
+/* Registers 0x07 to 0x0c are word-sized, others are byte-sized 
+   GL520 uses a high-byte first convention */
+static int gl520_read_value(struct i2c_client *client, u8 reg)
+{
+	if ((reg >= 0x07) && (reg <= 0x0c))
+		return swab16(i2c_smbus_read_word_data(client, reg));
+	else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if ((reg >= 0x07) && (reg <= 0x0c))
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+	else
+		return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+
+static struct gl520_data *gl520_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gl520_data *data = i2c_get_clientdata(client);
+	int val;
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > 2 * HZ) ||
+	    (jiffies < data->last_updated) || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting gl520sm update\n");
+
+		data->alarms = gl520_read_value(client, GL520_REG_ALARMS);
+		data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
+		data->vid = gl520_read_value(client, GL520_REG_VID_INPUT) & 0x1f;
+
+		val = gl520_read_value(client, GL520_REG_IN0_LIMIT);
+		data->in_min[0] = val & 0xff;
+		data->in_max[0] = (val >> 8) & 0xff;
+		val = gl520_read_value(client, GL520_REG_IN1_LIMIT);
+		data->in_min[1] = val & 0xff;
+		data->in_max[1] = (val >> 8) & 0xff;
+		val = gl520_read_value(client, GL520_REG_IN2_LIMIT);
+		data->in_min[2] = val & 0xff;
+		data->in_max[2] = (val >> 8) & 0xff;
+		val = gl520_read_value(client, GL520_REG_IN3_LIMIT);
+		data->in_min[3] = val & 0xff;
+		data->in_max[3] = (val >> 8) & 0xff;
+
+		val = gl520_read_value(client, GL520_REG_FAN_INPUT);
+		data->fan_input[0] = (val >> 8) & 0xff;
+		data->fan_input[1] = val & 0xff;
+
+		val = gl520_read_value(client, GL520_REG_FAN_MIN);
+		data->fan_min[0] = (val >> 8) & 0xff;
+		data->fan_min[1] = val & 0xff;
+
+		data->temp_input[0] = gl520_read_value(client, GL520_REG_TEMP1_INPUT);
+		data->temp_max[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX);
+		data->temp_max_hyst[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX_HYST);
+
+		val = gl520_read_value(client, GL520_REG_FAN_DIV);
+		data->fan_div[0] = (val >> 6) & 0x03;
+		data->fan_div[1] = (val >> 4) & 0x03;
+		data->fan_off = (val >> 2) & 0x01;
+
+		data->alarms &= data->alarm_mask;
+
+		val = gl520_read_value(client, GL520_REG_CONF);
+		data->beep_enable = !((val >> 2) & 1);
+
+		data->in_input[0] = gl520_read_value(client, GL520_REG_IN0_INPUT);
+		data->in_input[1] = gl520_read_value(client, GL520_REG_IN1_INPUT);
+		data->in_input[2] = gl520_read_value(client, GL520_REG_IN2_INPUT);
+		data->in_input[3] = gl520_read_value(client, GL520_REG_IN3_INPUT);
+
+		/* Temp1 and Vin4 are the same input */
+		if (data->two_temps) {
+			data->temp_input[1] = gl520_read_value(client, GL520_REG_TEMP2_INPUT);
+			data->temp_max[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX);
+			data->temp_max_hyst[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX_HYST);
+		} else {
+			data->in_input[4] = gl520_read_value(client, GL520_REG_IN4_INPUT);
+			data->in_min[4] = gl520_read_value(client, GL520_REG_IN4_MIN);
+			data->in_max[4] = gl520_read_value(client, GL520_REG_IN4_MAX);
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+
+static int __init sensors_gl520sm_init(void)
+{
+	return i2c_add_driver(&gl520_driver);
+}
+
+static void __exit sensors_gl520sm_exit(void)
+{
+	i2c_del_driver(&gl520_driver);
+}
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	"Kyösti Mälkki <kmalkki@cc.hut.fi>, "
+	"Maarten Deprez <maartendeprez@users.sourceforge.net>");
+MODULE_DESCRIPTION("GL520SM driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_gl520sm_init);
+module_exit(sensors_gl520sm_exit);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
new file mode 100644
index 000000000000..db20c9e47393
--- /dev/null
+++ b/drivers/hwmon/it87.c
@@ -0,0 +1,1184 @@
+/*
+    it87.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring.
+
+    Supports: IT8705F  Super I/O chip w/LPC interface & SMBus
+              IT8712F  Super I/O chip w/LPC interface & SMBus
+              Sis950   A clone of the IT8705F
+
+    Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com> 
+    Largely inspired by lm78.c of the same package
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    djg@pdp8.net David Gesswein 7/18/01
+    Modified to fix bug with not all alarms enabled.
+    Added ability to read battery voltage and select temperature sensor
+    type at module load time.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <linux/hwmon-sysfs.h>
+#include <asm/io.h>
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+					0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_2(it87, it8712);
+
+#define	REG	0x2e	/* The register to read/write */
+#define	DEV	0x07	/* Register: Logical device select */
+#define	VAL	0x2f	/* The value to read/write */
+#define PME	0x04	/* The device with the fan registers in it */
+#define	DEVID	0x20	/* Register: Device ID */
+#define	DEVREV	0x22	/* Register: Device Revision */
+
+static inline int
+superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static int superio_inw(int reg)
+{
+	int val;
+	outb(reg++, REG);
+	val = inb(VAL) << 8;
+	outb(reg, REG);
+	val |= inb(VAL);
+	return val;
+}
+
+static inline void
+superio_select(void)
+{
+	outb(DEV, REG);
+	outb(PME, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+	outb(0x87, REG);
+	outb(0x01, REG);
+	outb(0x55, REG);
+	outb(0x55, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+	outb(0x02, REG);
+	outb(0x02, VAL);
+}
+
+#define IT8712F_DEVID 0x8712
+#define IT8705F_DEVID 0x8705
+#define IT87_ACT_REG  0x30
+#define IT87_BASE_REG 0x60
+
+/* Update battery voltage after every reading if true */
+static int update_vbat;
+
+/* Not all BIOSes properly configure the PWM registers */
+static int fix_pwm_polarity;
+
+/* Chip Type */
+
+static u16 chip_type;
+
+/* Many IT87 constants specified below */
+
+/* Length of ISA address segment */
+#define IT87_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define IT87_ADDR_REG_OFFSET 5
+#define IT87_DATA_REG_OFFSET 6
+
+/*----- The IT87 registers -----*/
+
+#define IT87_REG_CONFIG        0x00
+
+#define IT87_REG_ALARM1        0x01
+#define IT87_REG_ALARM2        0x02
+#define IT87_REG_ALARM3        0x03
+
+#define IT87_REG_VID           0x0a
+#define IT87_REG_FAN_DIV       0x0b
+
+/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
+
+#define IT87_REG_FAN(nr)       (0x0d + (nr))
+#define IT87_REG_FAN_MIN(nr)   (0x10 + (nr))
+#define IT87_REG_FAN_MAIN_CTRL 0x13
+#define IT87_REG_FAN_CTL       0x14
+#define IT87_REG_PWM(nr)       (0x15 + (nr))
+
+#define IT87_REG_VIN(nr)       (0x20 + (nr))
+#define IT87_REG_TEMP(nr)      (0x29 + (nr))
+
+#define IT87_REG_VIN_MAX(nr)   (0x30 + (nr) * 2)
+#define IT87_REG_VIN_MIN(nr)   (0x31 + (nr) * 2)
+#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
+#define IT87_REG_TEMP_LOW(nr)  (0x41 + (nr) * 2)
+
+#define IT87_REG_I2C_ADDR      0x48
+
+#define IT87_REG_VIN_ENABLE    0x50
+#define IT87_REG_TEMP_ENABLE   0x51
+
+#define IT87_REG_CHIPID        0x58
+
+#define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
+#define IN_FROM_REG(val) ((val) * 16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+			     254);
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
+					((val)+500)/1000),-128,127))
+#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+
+#define PWM_TO_REG(val)   ((val) >> 1)
+#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
+
+static int DIV_TO_REG(int val)
+{
+	int answer = 0;
+	while ((val >>= 1) != 0)
+		answer++;
+	return answer;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+
+/* For each registered IT87, we need to keep some data in memory. That
+   data is pointed to by it87_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new it87 client is
+   allocated. */
+struct it87_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 in[9];		/* Register value */
+	u8 in_max[9];		/* Register value */
+	u8 in_min[9];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 temp[3];		/* Register value */
+	u8 temp_high[3];	/* Register value */
+	u8 temp_low[3];		/* Register value */
+	u8 sensor;		/* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	int vrm;
+	u32 alarms;		/* Register encoding, combined */
+	u8 fan_main_ctrl;	/* Register value */
+	u8 manual_pwm_ctl[3];   /* manual PWM value set by user */
+};
+
+
+static int it87_attach_adapter(struct i2c_adapter *adapter);
+static int it87_find(int *address);
+static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int it87_detach_client(struct i2c_client *client);
+
+static int it87_read_value(struct i2c_client *client, u8 register);
+static int it87_write_value(struct i2c_client *client, u8 register,
+			u8 value);
+static struct it87_data *it87_update_device(struct device *dev);
+static int it87_check_pwm(struct i2c_client *client);
+static void it87_init_client(struct i2c_client *client, struct it87_data *data);
+
+
+static struct i2c_driver it87_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "it87",
+	.id		= I2C_DRIVERID_IT87,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= it87_attach_adapter,
+	.detach_client	= it87_detach_client,
+};
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val);
+	it87_write_value(client, IT87_REG_VIN_MIN(nr), 
+			data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val);
+	it87_write_value(client, IT87_REG_VIN_MAX(nr), 
+			data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_in_offset(offset)					\
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO,		\
+		show_in, NULL, offset);
+
+#define limit_in_offset(offset)					\
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,	\
+		show_in_min, set_in_min, offset);		\
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,	\
+		show_in_max, set_in_max, offset);
+
+show_in_offset(0);
+limit_in_offset(0);
+show_in_offset(1);
+limit_in_offset(1);
+show_in_offset(2);
+limit_in_offset(2);
+show_in_offset(3);
+limit_in_offset(3);
+show_in_offset(4);
+limit_in_offset(4);
+show_in_offset(5);
+limit_in_offset(5);
+show_in_offset(6);
+limit_in_offset(6);
+show_in_offset(7);
+limit_in_offset(7);
+show_in_offset(8);
+
+/* 3 temperatures */
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
+}
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr]));
+}
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_high[nr] = TEMP_TO_REG(val);
+	it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_low[nr] = TEMP_TO_REG(val);
+	it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_temp_offset(offset)					\
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,		\
+		show_temp, NULL, offset - 1);				\
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,	\
+		show_temp_max, set_temp_max, offset - 1);		\
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,	\
+		show_temp_min, set_temp_min, offset - 1);
+
+show_temp_offset(1);
+show_temp_offset(2);
+show_temp_offset(3);
+
+static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	u8 reg = data->sensor; /* In case the value is updated while we use it */
+	
+	if (reg & (1 << nr))
+		return sprintf(buf, "3\n");  /* thermal diode */
+	if (reg & (8 << nr))
+		return sprintf(buf, "2\n");  /* thermistor */
+	return sprintf(buf, "0\n");      /* disabled */
+}
+static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	data->sensor &= ~(1 << nr);
+	data->sensor &= ~(8 << nr);
+	/* 3 = thermal diode; 2 = thermistor; 0 = disabled */
+	if (val == 3)
+	    data->sensor |= 1 << nr;
+	else if (val == 2)
+	    data->sensor |= 8 << nr;
+	else if (val != 0) {
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+	it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+	up(&data->update_lock);
+	return count;
+}
+#define show_sensor_offset(offset)					\
+static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR,	\
+		show_sensor, set_sensor, offset - 1);
+
+show_sensor_offset(1);
+show_sensor_offset(2);
+show_sensor_offset(3);
+
+/* 3 Fans */
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], 
+				DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n",
+		FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0);
+}
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]);
+}
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	int i, min[3];
+	u8 old;
+
+	down(&data->update_lock);
+	old = it87_read_value(client, IT87_REG_FAN_DIV);
+
+	for (i = 0; i < 3; i++)
+		min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i]));
+
+	switch (nr) {
+	case 0:
+	case 1:
+		data->fan_div[nr] = DIV_TO_REG(val);
+		break;
+	case 2:
+		if (val < 8)
+			data->fan_div[nr] = 1;
+		else
+			data->fan_div[nr] = 3;
+	}
+	val = old & 0x80;
+	val |= (data->fan_div[0] & 0x07);
+	val |= (data->fan_div[1] & 0x07) << 3;
+	if (data->fan_div[2] == 3)
+		val |= 0x1 << 6;
+	it87_write_value(client, IT87_REG_FAN_DIV, val);
+
+	for (i = 0; i < 3; i++) {
+		data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i]));
+		it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_pwm_enable(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if (val == 0) {
+		int tmp;
+		/* make sure the fan is on when in on/off mode */
+		tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+		it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr));
+		/* set on/off mode */
+		data->fan_main_ctrl &= ~(1 << nr);
+		it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+	} else if (val == 1) {
+		/* set SmartGuardian mode */
+		data->fan_main_ctrl |= (1 << nr);
+		it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+		/* set saved pwm value, clear FAN_CTLX PWM mode bit */
+		it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+	} else {
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	if (val < 0 || val > 255)
+		return -EINVAL;
+
+	down(&data->update_lock);
+	data->manual_pwm_ctl[nr] = val;
+	if (data->fan_main_ctrl & (1 << nr))
+		it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)					\
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,		\
+		show_fan, NULL, offset - 1);			\
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		show_fan_min, set_fan_min, offset - 1);		\
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+		show_fan_div, set_fan_div, offset - 1);
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+
+#define show_pwm_offset(offset)						\
+static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,	\
+		show_pwm_enable, set_pwm_enable, offset - 1);		\
+static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,		\
+		show_pwm, set_pwm, offset - 1);
+
+show_pwm_offset(1);
+show_pwm_offset(2);
+show_pwm_offset(3);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t
+show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+static ssize_t
+store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm)
+
+static ssize_t
+show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+/* This function is called when:
+     * it87_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and it87_driver is still present) */
+static int it87_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, it87_detect);
+}
+
+/* SuperIO detection - will change normal_isa[0] if a chip is found */
+static int it87_find(int *address)
+{
+	int err = -ENODEV;
+
+	superio_enter();
+	chip_type = superio_inw(DEVID);
+	if (chip_type != IT8712F_DEVID
+	 && chip_type != IT8705F_DEVID)
+	 	goto exit;
+
+	superio_select();
+	if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
+		pr_info("it87: Device not activated, skipping\n");
+		goto exit;
+	}
+
+	*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
+	if (*address == 0) {
+		pr_info("it87: Base address not set, skipping\n");
+		goto exit;
+	}
+
+	err = 0;
+	pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+		chip_type, *address, superio_inb(DEVREV) & 0x0f);
+
+exit:
+	superio_exit();
+	return err;
+}
+
+/* This function is called by i2c_detect */
+int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct it87_data *data;
+	int err = 0;
+	const char *name = "";
+	int is_isa = i2c_is_isa_adapter(adapter);
+	int enable_pwm_interface;
+
+	if (!is_isa && 
+	    !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto ERROR0;
+
+	/* Reserve the ISA region */
+	if (is_isa)
+		if (!request_region(address, IT87_EXTENT, it87_driver.name))
+			goto ERROR0;
+
+	/* Probe whether there is anything available on this address. Already
+	   done for SMBus and Super-I/O clients */
+	if (kind < 0) {
+		if (is_isa && !chip_type) {
+#define REALLY_SLOW_IO
+			/* We need the timeouts for at least some IT87-like chips. But only
+			   if we read 'undefined' registers. */
+			i = inb_p(address + 1);
+			if (inb_p(address + 2) != i
+			 || inb_p(address + 3) != i
+			 || inb_p(address + 7) != i) {
+		 		err = -ENODEV;
+				goto ERROR1;
+			}
+#undef REALLY_SLOW_IO
+
+			/* Let's just hope nothing breaks here */
+			i = inb_p(address + 5) & 0x7f;
+			outb_p(~i & 0x7f, address + 5);
+			if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) {
+				outb_p(i, address + 5);
+				err = -ENODEV;
+				goto ERROR1;
+			}
+		}
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access it87_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+	memset(data, 0, sizeof(struct it87_data));
+
+	new_client = &data->client;
+	if (is_isa)
+		init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &it87_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	if (kind < 0) {
+		if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
+		  || (!is_isa
+		   && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) {
+		   	err = -ENODEV;
+			goto ERROR2;
+		}
+	}
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		i = it87_read_value(new_client, IT87_REG_CHIPID);
+		if (i == 0x90) {
+			kind = it87;
+			if ((is_isa) && (chip_type == IT8712F_DEVID))
+				kind = it8712;
+		}
+		else {
+			if (kind == 0)
+				dev_info(&adapter->dev, 
+					"Ignoring 'force' parameter for unknown chip at "
+					"adapter %d, address 0x%02x\n",
+					i2c_adapter_id(adapter), address);
+			err = -ENODEV;
+			goto ERROR2;
+		}
+	}
+
+	if (kind == it87) {
+		name = "it87";
+	} else if (kind == it8712) {
+		name = "it8712";
+	}
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	/* Check PWM configuration */
+	enable_pwm_interface = it87_check_pwm(new_client);
+
+	/* Initialize the IT87 chip */
+	it87_init_client(new_client, data);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_type.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_type.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr);
+	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	if (enable_pwm_interface) {
+		device_create_file(&new_client->dev, &sensor_dev_attr_pwm1_enable.dev_attr);
+		device_create_file(&new_client->dev, &sensor_dev_attr_pwm2_enable.dev_attr);
+		device_create_file(&new_client->dev, &sensor_dev_attr_pwm3_enable.dev_attr);
+		device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr);
+		device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr);
+		device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr);
+	}
+
+	if (data->type == it8712) {
+		data->vrm = i2c_which_vrm();
+		device_create_file_vrm(new_client);
+		device_create_file_vid(new_client);
+	}
+
+	return 0;
+
+ERROR2:
+	kfree(data);
+ERROR1:
+	if (is_isa)
+		release_region(address, IT87_EXTENT);
+ERROR0:
+	return err;
+}
+
+static int it87_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+			"Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if(i2c_is_isa_client(client))
+		release_region(client->addr, IT87_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+/* The SMBus locks itself, but ISA access must be locked explicitly! 
+   We don't want to lock the whole ISA bus, so we lock each client
+   separately.
+   We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the IT87 access and should not be necessary. */
+static int it87_read_value(struct i2c_client *client, u8 reg)
+{
+	struct it87_data *data = i2c_get_clientdata(client);
+
+	int res;
+	if (i2c_is_isa_client(client)) {
+		down(&data->lock);
+		outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+		res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
+		up(&data->lock);
+		return res;
+	} else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* The SMBus locks itself, but ISA access muse be locked explicitly! 
+   We don't want to lock the whole ISA bus, so we lock each client
+   separately.
+   We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the IT87 access and should not be necessary. */
+static int it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	struct it87_data *data = i2c_get_clientdata(client);
+
+	if (i2c_is_isa_client(client)) {
+		down(&data->lock);
+		outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+		outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
+		up(&data->lock);
+		return 0;
+	} else
+		return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Return 1 if and only if the PWM interface is safe to use */
+static int it87_check_pwm(struct i2c_client *client)
+{
+	/* Some BIOSes fail to correctly configure the IT87 fans. All fans off
+	 * and polarity set to active low is sign that this is the case so we
+	 * disable pwm control to protect the user. */
+	int tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+	if ((tmp & 0x87) == 0) {
+		if (fix_pwm_polarity) {
+			/* The user asks us to attempt a chip reconfiguration.
+			 * This means switching to active high polarity and
+			 * inverting all fan speed values. */
+			int i;
+			u8 pwm[3];
+
+			for (i = 0; i < 3; i++)
+				pwm[i] = it87_read_value(client,
+							 IT87_REG_PWM(i));
+
+			/* If any fan is in automatic pwm mode, the polarity
+			 * might be correct, as suspicious as it seems, so we
+			 * better don't change anything (but still disable the
+			 * PWM interface). */
+			if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
+				dev_info(&client->dev, "Reconfiguring PWM to "
+					 "active high polarity\n");
+				it87_write_value(client, IT87_REG_FAN_CTL,
+						 tmp | 0x87);
+				for (i = 0; i < 3; i++)
+					it87_write_value(client,
+							 IT87_REG_PWM(i),
+							 0x7f & ~pwm[i]);
+				return 1;
+			}
+
+			dev_info(&client->dev, "PWM configuration is "
+				 "too broken to be fixed\n");
+		}
+
+		dev_info(&client->dev, "Detected broken BIOS "
+			 "defaults, disabling PWM interface\n");
+		return 0;
+	} else if (fix_pwm_polarity) {
+		dev_info(&client->dev, "PWM configuration looks "
+			 "sane, won't touch\n");
+	}
+
+	return 1;
+}
+
+/* Called when we have found a new IT87. */
+static void it87_init_client(struct i2c_client *client, struct it87_data *data)
+{
+	int tmp, i;
+
+	/* initialize to sane defaults:
+	 * - if the chip is in manual pwm mode, this will be overwritten with
+	 *   the actual settings on the chip (so in this case, initialization
+	 *   is not needed)
+	 * - if in automatic or on/off mode, we could switch to manual mode,
+	 *   read the registers and set manual_pwm_ctl accordingly, but currently
+	 *   this is not implemented, so we initialize to something sane */
+	for (i = 0; i < 3; i++) {
+		data->manual_pwm_ctl[i] = 0xff;
+	}
+
+	/* Check if temperature channnels are reset manually or by some reason */
+	tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+	if ((tmp & 0x3f) == 0) {
+		/* Temp1,Temp3=thermistor; Temp2=thermal diode */
+		tmp = (tmp & 0xc0) | 0x2a;
+		it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp);
+	}
+	data->sensor = tmp;
+
+	/* Check if voltage monitors are reset manually or by some reason */
+	tmp = it87_read_value(client, IT87_REG_VIN_ENABLE);
+	if ((tmp & 0xff) == 0) {
+		/* Enable all voltage monitors */
+		it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
+	}
+
+	/* Check if tachometers are reset manually or by some reason */
+	data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+	if ((data->fan_main_ctrl & 0x70) == 0) {
+		/* Enable all fan tachometers */
+		data->fan_main_ctrl |= 0x70;
+		it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+	}
+
+	/* Set current fan mode registers and the default settings for the
+	 * other mode registers */
+	for (i = 0; i < 3; i++) {
+		if (data->fan_main_ctrl & (1 << i)) {
+			/* pwm mode */
+			tmp = it87_read_value(client, IT87_REG_PWM(i));
+			if (tmp & 0x80) {
+				/* automatic pwm - not yet implemented, but
+				 * leave the settings made by the BIOS alone
+				 * until a change is requested via the sysfs
+				 * interface */
+			} else {
+				/* manual pwm */
+				data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp);
+			}
+		}
+ 	}
+
+	/* Start monitoring */
+	it87_write_value(client, IT87_REG_CONFIG,
+			 (it87_read_value(client, IT87_REG_CONFIG) & 0x36)
+			 | (update_vbat ? 0x41 : 0x01));
+}
+
+static struct it87_data *it87_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		if (update_vbat) {
+			/* Cleared after each update, so reenable.  Value
+		 	  returned by this read will be previous value */	
+			it87_write_value(client, IT87_REG_CONFIG,
+			   it87_read_value(client, IT87_REG_CONFIG) | 0x40);
+		}
+		for (i = 0; i <= 7; i++) {
+			data->in[i] =
+			    it87_read_value(client, IT87_REG_VIN(i));
+			data->in_min[i] =
+			    it87_read_value(client, IT87_REG_VIN_MIN(i));
+			data->in_max[i] =
+			    it87_read_value(client, IT87_REG_VIN_MAX(i));
+		}
+		data->in[8] =
+		    it87_read_value(client, IT87_REG_VIN(8));
+		/* Temperature sensor doesn't have limit registers, set
+		   to min and max value */
+		data->in_min[8] = 0;
+		data->in_max[8] = 255;
+
+		for (i = 0; i < 3; i++) {
+			data->fan[i] =
+			    it87_read_value(client, IT87_REG_FAN(i));
+			data->fan_min[i] =
+			    it87_read_value(client, IT87_REG_FAN_MIN(i));
+		}
+		for (i = 0; i < 3; i++) {
+			data->temp[i] =
+			    it87_read_value(client, IT87_REG_TEMP(i));
+			data->temp_high[i] =
+			    it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+			data->temp_low[i] =
+			    it87_read_value(client, IT87_REG_TEMP_LOW(i));
+		}
+
+		i = it87_read_value(client, IT87_REG_FAN_DIV);
+		data->fan_div[0] = i & 0x07;
+		data->fan_div[1] = (i >> 3) & 0x07;
+		data->fan_div[2] = (i & 0x40) ? 3 : 1;
+
+		data->alarms =
+			it87_read_value(client, IT87_REG_ALARM1) |
+			(it87_read_value(client, IT87_REG_ALARM2) << 8) |
+			(it87_read_value(client, IT87_REG_ALARM3) << 16);
+		data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+
+		data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+		/* The 8705 does not have VID capability */
+		if (data->type == it8712) {
+			data->vid = it87_read_value(client, IT87_REG_VID);
+			data->vid &= 0x1f;
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sm_it87_init(void)
+{
+	int addr;
+
+	if (!it87_find(&addr)) {
+		normal_isa[0] = addr;
+	}
+	return i2c_add_driver(&it87_driver);
+}
+
+static void __exit sm_it87_exit(void)
+{
+	i2c_del_driver(&it87_driver);
+}
+
+
+MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>");
+MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
+module_param(update_vbat, bool, 0);
+MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
+module_param(fix_pwm_polarity, bool, 0);
+MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)");
+MODULE_LICENSE("GPL");
+
+module_init(sm_it87_init);
+module_exit(sm_it87_exit);
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
new file mode 100644
index 000000000000..7c6f9ea5a254
--- /dev/null
+++ b/drivers/hwmon/lm63.c
@@ -0,0 +1,597 @@
+/*
+ * lm63.c - driver for the National Semiconductor LM63 temperature sensor
+ *          with integrated fan control
+ * Copyright (C) 2004-2005  Jean Delvare <khali@linux-fr.org>
+ * Based on the lm90 driver.
+ *
+ * The LM63 is a sensor chip made by National Semiconductor. It measures
+ * two temperatures (its own and one external one) and the speed of one
+ * fan, those speed it can additionally control. Complete datasheet can be
+ * obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM63.html
+ *
+ * The LM63 is basically an LM86 with fan speed monitoring and control
+ * capabilities added. It misses some of the LM86 features though:
+ *  - No low limit for local temperature.
+ *  - No critical limit for local temperature.
+ *  - Critical limit for remote temperature can be changed only once. We
+ *    will consider that the critical limit is read-only.
+ *
+ * The datasheet isn't very clear about what the tachometer reading is.
+ * I had a explanation from National Semiconductor though. The two lower
+ * bits of the read value have to be masked out. The value is still 16 bit
+ * in width.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * Addresses to scan
+ * Address is fully defined internally and cannot be changed.
+ */
+
+static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(lm63);
+
+/*
+ * The LM63 registers
+ */
+
+#define LM63_REG_CONFIG1		0x03
+#define LM63_REG_CONFIG2		0xBF
+#define LM63_REG_CONFIG_FAN		0x4A
+
+#define LM63_REG_TACH_COUNT_MSB		0x47
+#define LM63_REG_TACH_COUNT_LSB		0x46
+#define LM63_REG_TACH_LIMIT_MSB		0x49
+#define LM63_REG_TACH_LIMIT_LSB		0x48
+
+#define LM63_REG_PWM_VALUE		0x4C
+#define LM63_REG_PWM_FREQ		0x4D
+
+#define LM63_REG_LOCAL_TEMP		0x00
+#define LM63_REG_LOCAL_HIGH		0x05
+
+#define LM63_REG_REMOTE_TEMP_MSB	0x01
+#define LM63_REG_REMOTE_TEMP_LSB	0x10
+#define LM63_REG_REMOTE_OFFSET_MSB	0x11
+#define LM63_REG_REMOTE_OFFSET_LSB	0x12
+#define LM63_REG_REMOTE_HIGH_MSB	0x07
+#define LM63_REG_REMOTE_HIGH_LSB	0x13
+#define LM63_REG_REMOTE_LOW_MSB		0x08
+#define LM63_REG_REMOTE_LOW_LSB		0x14
+#define LM63_REG_REMOTE_TCRIT		0x19
+#define LM63_REG_REMOTE_TCRIT_HYST	0x21
+
+#define LM63_REG_ALERT_STATUS		0x02
+#define LM63_REG_ALERT_MASK		0x16
+
+#define LM63_REG_MAN_ID			0xFE
+#define LM63_REG_CHIP_ID		0xFF
+
+/*
+ * Conversions and various macros
+ * For tachometer counts, the LM63 uses 16-bit values.
+ * For local temperature and high limit, remote critical limit and hysteresis
+ * value, it uses signed 8-bit values with LSB = 1 degree Celsius.
+ * For remote temperature, low and high limits, it uses signed 11-bit values
+ * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
+ */
+
+#define FAN_FROM_REG(reg)	((reg) == 0xFFFC || (reg) == 0 ? 0 : \
+				 5400000 / (reg))
+#define FAN_TO_REG(val)		((val) <= 82 ? 0xFFFC : \
+				 (5400000 / (val)) & 0xFFFC)
+#define TEMP8_FROM_REG(reg)	((reg) * 1000)
+#define TEMP8_TO_REG(val)	((val) <= -128000 ? -128 : \
+				 (val) >= 127000 ? 127 : \
+				 (val) < 0 ? ((val) - 500) / 1000 : \
+				 ((val) + 500) / 1000)
+#define TEMP11_FROM_REG(reg)	((reg) / 32 * 125)
+#define TEMP11_TO_REG(val)	((val) <= -128000 ? 0x8000 : \
+				 (val) >= 127875 ? 0x7FE0 : \
+				 (val) < 0 ? ((val) - 62) / 125 * 32 : \
+				 ((val) + 62) / 125 * 32)
+#define HYST_TO_REG(val)	((val) <= 0 ? 0 : \
+				 (val) >= 127000 ? 127 : \
+				 ((val) + 500) / 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int lm63_attach_adapter(struct i2c_adapter *adapter);
+static int lm63_detach_client(struct i2c_client *client);
+
+static struct lm63_data *lm63_update_device(struct device *dev);
+
+static int lm63_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm63_init_client(struct i2c_client *client);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm63_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm63",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm63_attach_adapter,
+	.detach_client	= lm63_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm63_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 config, config_fan;
+	u16 fan[2];	/* 0: input
+			   1: low limit */
+	u8 pwm1_freq;
+	u8 pwm1_value;
+	s8 temp8[3];	/* 0: local input
+			   1: local high limit
+			   2: remote critical limit */
+	s16 temp11[3];	/* 0: remote input
+			   1: remote low limit
+			   2: remote high limit */
+	u8 temp2_crit_hyst;
+	u8 alarms;
+};
+
+/*
+ * Sysfs callback functions and files
+ */
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index]));
+}
+
+static ssize_t set_fan(struct device *dev, struct device_attribute *dummy,
+		       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan[1] = FAN_TO_REG(val);
+	i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB,
+				  data->fan[1] & 0xFF);
+	i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB,
+				  data->fan[1] >> 8);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy,
+			 char *buf)
+{
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ?
+		       255 : (data->pwm1_value * 255 + data->pwm1_freq) /
+		       (2 * data->pwm1_freq));
+}
+
+static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy,
+			const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	
+	if (!(data->config_fan & 0x20)) /* register is read-only */
+		return -EPERM;
+
+	val = simple_strtoul(buf, NULL, 10);
+	down(&data->update_lock);
+	data->pwm1_value = val <= 0 ? 0 :
+			   val >= 255 ? 2 * data->pwm1_freq :
+			   (val * data->pwm1_freq * 2 + 127) / 255;
+	i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy,
+				char *buf)
+{
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2);
+}
+
+static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index]));
+}
+
+static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy,
+			 const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp8[1] = TEMP8_TO_REG(val);
+	i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
+			   char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index]));
+}
+
+static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
+			  const char *buf, size_t count)
+{
+	static const u8 reg[4] = {
+		LM63_REG_REMOTE_LOW_MSB,
+		LM63_REG_REMOTE_LOW_LSB,
+		LM63_REG_REMOTE_HIGH_MSB,
+		LM63_REG_REMOTE_HIGH_LSB,
+	};
+
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int nr = attr->index;
+
+	down(&data->update_lock);
+	data->temp11[nr] = TEMP11_TO_REG(val);
+	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
+				  data->temp11[nr] >> 8);
+	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
+				  data->temp11[nr] & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+/* Hysteresis register holds a relative value, while we want to present
+   an absolute to user-space */
+static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy,
+				    char *buf)
+{
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2])
+		       - TEMP8_FROM_REG(data->temp2_crit_hyst));
+}
+
+/* And now the other way around, user-space provides an absolute
+   hysteresis value and we have to store a relative one */
+static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy,
+				   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	long hyst;
+
+	down(&data->update_lock);
+	hyst = TEMP8_FROM_REG(data->temp8[2]) - val;
+	i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
+				  HYST_TO_REG(hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy,
+			   char *buf)
+{
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan,
+	set_fan, 1);
+
+static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 1);
+
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 2);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2);
+static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst,
+	set_temp2_crit_hyst);
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm63_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm63_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm63_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm63_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm63_data));
+
+	/* The common I2C client data is placed right before the
+	   LM63-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm63_driver;
+	new_client->flags = 0;
+
+	/* Default to an LM63 if forced */
+	if (kind == 0)
+		kind = lm63;
+
+	if (kind < 0) { /* must identify */
+		u8 man_id, chip_id, reg_config1, reg_config2;
+		u8 reg_alert_status, reg_alert_mask;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 LM63_REG_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  LM63_REG_CHIP_ID);
+		reg_config1 = i2c_smbus_read_byte_data(new_client,
+			      LM63_REG_CONFIG1);
+		reg_config2 = i2c_smbus_read_byte_data(new_client,
+			      LM63_REG_CONFIG2);
+		reg_alert_status = i2c_smbus_read_byte_data(new_client,
+				   LM63_REG_ALERT_STATUS);
+		reg_alert_mask = i2c_smbus_read_byte_data(new_client,
+				 LM63_REG_ALERT_MASK);
+
+		if (man_id == 0x01 /* National Semiconductor */
+		 && chip_id == 0x41 /* LM63 */
+		 && (reg_config1 & 0x18) == 0x00
+		 && (reg_config2 & 0xF8) == 0x00
+		 && (reg_alert_status & 0x20) == 0x00
+		 && (reg_alert_mask & 0xA4) == 0xA4) {
+			kind = lm63;
+		} else { /* failed */
+			dev_dbg(&adapter->dev, "Unsupported chip "
+				"(man_id=0x%02X, chip_id=0x%02X).\n",
+				man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	strlcpy(new_client->name, "lm63", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM63 chip */
+	lm63_init_client(new_client);
+
+	/* Register sysfs hooks */
+	if (data->config & 0x04) { /* tachometer enabled */
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan1_input.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan1_min.dev_attr);
+	}
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_min.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_crit.dev_attr);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+/* Idealy we shouldn't have to initialize anything, since the BIOS
+   should have taken care of everything */
+static void lm63_init_client(struct i2c_client *client)
+{
+	struct lm63_data *data = i2c_get_clientdata(client);
+
+	data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1);
+	data->config_fan = i2c_smbus_read_byte_data(client,
+						    LM63_REG_CONFIG_FAN);
+
+	/* Start converting if needed */
+	if (data->config & 0x40) { /* standby */
+		dev_dbg(&client->dev, "Switching to operational mode");
+		data->config &= 0xA7;
+		i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1,
+					  data->config);
+	}
+
+	/* We may need pwm1_freq before ever updating the client data */
+	data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ);
+	if (data->pwm1_freq == 0)
+		data->pwm1_freq = 1;
+
+	/* Show some debug info about the LM63 configuration */
+	dev_dbg(&client->dev, "Alert/tach pin configured for %s\n",
+		(data->config & 0x04) ? "tachometer input" :
+		"alert output");
+	dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n",
+		(data->config_fan & 0x08) ? "1.4" : "360",
+		((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq);
+	dev_dbg(&client->dev, "PWM output active %s, %s mode\n",
+		(data->config_fan & 0x10) ? "low" : "high",
+		(data->config_fan & 0x20) ? "manual" : "auto");
+}
+
+static int lm63_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm63_data *lm63_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		if (data->config & 0x04) { /* tachometer enabled  */
+			/* order matters for fan1_input */
+			data->fan[0] = i2c_smbus_read_byte_data(client,
+				       LM63_REG_TACH_COUNT_LSB) & 0xFC;
+			data->fan[0] |= i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_COUNT_MSB) << 8;
+			data->fan[1] = (i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_LIMIT_LSB) & 0xFC)
+				     | (i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_LIMIT_MSB) << 8);
+		}
+
+		data->pwm1_freq = i2c_smbus_read_byte_data(client,
+				  LM63_REG_PWM_FREQ);
+		if (data->pwm1_freq == 0)
+			data->pwm1_freq = 1;
+		data->pwm1_value = i2c_smbus_read_byte_data(client,
+				   LM63_REG_PWM_VALUE);
+
+		data->temp8[0] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_LOCAL_TEMP);
+		data->temp8[1] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_LOCAL_HIGH);
+
+		/* order matters for temp2_input */
+		data->temp11[0] = i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_TEMP_MSB) << 8;
+		data->temp11[0] |= i2c_smbus_read_byte_data(client,
+				   LM63_REG_REMOTE_TEMP_LSB);
+		data->temp11[1] = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_LOW_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_LOW_LSB);
+		data->temp11[2] = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_HIGH_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_HIGH_LSB);
+		data->temp8[2] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_REMOTE_TCRIT);
+		data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
+					LM63_REG_REMOTE_TCRIT_HYST);
+
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       LM63_REG_ALERT_STATUS) & 0x7F;
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm63_init(void)
+{
+	return i2c_add_driver(&lm63_driver);
+}
+
+static void __exit sensors_lm63_exit(void)
+{
+	i2c_del_driver(&lm63_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM63 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm63_init);
+module_exit(sensors_lm63_exit);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
new file mode 100644
index 000000000000..5be164ed278e
--- /dev/null
+++ b/drivers/hwmon/lm75.c
@@ -0,0 +1,296 @@
+/*
+    lm75.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include "lm75.h"
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(lm75);
+
+/* Many LM75 constants specified below */
+
+/* The LM75 registers */
+#define LM75_REG_TEMP		0x00
+#define LM75_REG_CONF		0x01
+#define LM75_REG_TEMP_HYST	0x02
+#define LM75_REG_TEMP_OS	0x03
+
+/* Each client has this additional data */
+struct lm75_data {
+	struct i2c_client	client;
+	struct semaphore	update_lock;
+	char			valid;		/* !=0 if following fields are valid */
+	unsigned long		last_updated;	/* In jiffies */
+	u16			temp_input;	/* Register values */
+	u16			temp_max;
+	u16			temp_hyst;
+};
+
+static int lm75_attach_adapter(struct i2c_adapter *adapter);
+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm75_init_client(struct i2c_client *client);
+static int lm75_detach_client(struct i2c_client *client);
+static int lm75_read_value(struct i2c_client *client, u8 reg);
+static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
+static struct lm75_data *lm75_update_device(struct device *dev);
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver lm75_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm75",
+	.id		= I2C_DRIVERID_LM75,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm75_attach_adapter,
+	.detach_client	= lm75_detach_client,
+};
+
+#define show(value)	\
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	struct lm75_data *data = lm75_update_device(dev);		\
+	return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value));	\
+}
+show(temp_max);
+show(temp_hyst);
+show(temp_input);
+
+#define set(value, reg)	\
+static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)	\
+{								\
+	struct i2c_client *client = to_i2c_client(dev);		\
+	struct lm75_data *data = i2c_get_clientdata(client);	\
+	int temp = simple_strtoul(buf, NULL, 10);		\
+								\
+	down(&data->update_lock);				\
+	data->value = LM75_TEMP_TO_REG(temp);			\
+	lm75_write_value(client, reg, data->value);		\
+	up(&data->update_lock);					\
+	return count;						\
+}
+set(temp_max, LM75_REG_TEMP_OS);
+set(temp_hyst, LM75_REG_TEMP_HYST);
+
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
+
+static int lm75_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm75_detect);
+}
+
+/* This function is called by i2c_detect */
+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct lm75_data *data;
+	int err = 0;
+	const char *name = "";
+
+	/* Make sure we aren't probing the ISA bus!! This is just a safety check
+	   at this moment; i2c_detect really won't call us. */
+#ifdef DEBUG
+	if (i2c_is_isa_adapter(adapter)) {
+		dev_dbg(&adapter->dev,
+			"lm75_detect called for an ISA bus adapter?!?\n");
+		goto exit;
+	}
+#endif
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm75_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm75_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm75_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. There is no identification-
+	   dedicated register so we have to rely on several tricks:
+	   unused bits, registers cycling over 8-address boundaries,
+	   addresses 0x04-0x07 returning the last read value.
+	   The cycling+unused addresses combination is not tested,
+	   since it would significantly slow the detection down and would
+	   hardly add any value. */
+	if (kind < 0) {
+		int cur, conf, hyst, os;
+
+		/* Unused addresses */
+		cur = i2c_smbus_read_word_data(new_client, 0);
+		conf = i2c_smbus_read_byte_data(new_client, 1);
+		hyst = i2c_smbus_read_word_data(new_client, 2);
+		if (i2c_smbus_read_word_data(new_client, 4) != hyst
+		 || i2c_smbus_read_word_data(new_client, 5) != hyst
+		 || i2c_smbus_read_word_data(new_client, 6) != hyst
+		 || i2c_smbus_read_word_data(new_client, 7) != hyst)
+		 	goto exit_free;
+		os = i2c_smbus_read_word_data(new_client, 3);
+		if (i2c_smbus_read_word_data(new_client, 4) != os
+		 || i2c_smbus_read_word_data(new_client, 5) != os
+		 || i2c_smbus_read_word_data(new_client, 6) != os
+		 || i2c_smbus_read_word_data(new_client, 7) != os)
+		 	goto exit_free;
+
+		/* Unused bits */
+		if (conf & 0xe0)
+		 	goto exit_free;
+
+		/* Addresses cycling */
+		for (i = 8; i < 0xff; i += 8)
+			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+			 || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+			 || i2c_smbus_read_word_data(new_client, i + 3) != os)
+				goto exit_free;
+	}
+
+	/* Determine the chip type - only one kind supported! */
+	if (kind <= 0)
+		kind = lm75;
+
+	if (kind == lm75) {
+		name = "lm75";
+	}
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM75 chip */
+	lm75_init_client(new_client);
+	
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm75_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+/* All registers are word-sized, except for the configuration register.
+   LM75 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int lm75_read_value(struct i2c_client *client, u8 reg)
+{
+	if (reg == LM75_REG_CONF)
+		return i2c_smbus_read_byte_data(client, reg);
+	else
+		return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+/* All registers are word-sized, except for the configuration register.
+   LM75 uses a high-byte first convention, which is exactly opposite to
+   the usual practice. */
+static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (reg == LM75_REG_CONF)
+		return i2c_smbus_write_byte_data(client, reg, value);
+	else
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static void lm75_init_client(struct i2c_client *client)
+{
+	/* Initialize the LM75 chip */
+	lm75_write_value(client, LM75_REG_CONF, 0);
+}
+
+static struct lm75_data *lm75_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm75_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(&client->dev, "Starting lm75 update\n");
+
+		data->temp_input = lm75_read_value(client, LM75_REG_TEMP);
+		data->temp_max = lm75_read_value(client, LM75_REG_TEMP_OS);
+		data->temp_hyst = lm75_read_value(client, LM75_REG_TEMP_HYST);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm75_init(void)
+{
+	return i2c_add_driver(&lm75_driver);
+}
+
+static void __exit sensors_lm75_exit(void)
+{
+	i2c_del_driver(&lm75_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("LM75 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm75_init);
+module_exit(sensors_lm75_exit);
diff --git a/drivers/hwmon/lm75.h b/drivers/hwmon/lm75.h
new file mode 100644
index 000000000000..63e3f2fb4c21
--- /dev/null
+++ b/drivers/hwmon/lm75.h
@@ -0,0 +1,49 @@
+/*
+    lm75.h - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This file contains common code for encoding/decoding LM75 type
+    temperature readings, which are emulated by many of the chips
+    we support.  As the user is unlikely to load more than one driver
+    which contains this code, we don't worry about the wasted space.
+*/
+
+#include <linux/i2c-sensor.h>
+
+/* straight from the datasheet */
+#define LM75_TEMP_MIN (-55000)
+#define LM75_TEMP_MAX 125000
+
+/* TEMP: 0.001C/bit (-55C to +125C)
+   REG: (0.5C/bit, two's complement) << 7 */
+static inline u16 LM75_TEMP_TO_REG(int temp)
+{
+	int ntemp = SENSORS_LIMIT(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
+	ntemp += (ntemp<0 ? -250 : 250);
+	return (u16)((ntemp / 500) << 7);
+}
+
+static inline int LM75_TEMP_FROM_REG(u16 reg)
+{
+	/* use integer division instead of equivalent right shift to
+	   guarantee arithmetic shift and preserve the sign */
+	return ((s16)reg / 128) * 500;
+}
+
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
new file mode 100644
index 000000000000..b98f44952997
--- /dev/null
+++ b/drivers/hwmon/lm77.c
@@ -0,0 +1,420 @@
+/*
+    lm77.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+
+    Copyright (c) 2004  Andras BALI <drewie@freemail.hu>
+
+    Heavily based on lm75.c by Frodo Looijaard <frodol@dds.nl>.  The LM77
+    is a temperature sensor and thermal window comparator with 0.5 deg
+    resolution made by National Semiconductor.  Complete datasheet can be
+    obtained at their site:
+       http://www.national.com/pf/LM/LM77.html
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(lm77);
+
+/* The LM77 registers */
+#define LM77_REG_TEMP		0x00
+#define LM77_REG_CONF		0x01
+#define LM77_REG_TEMP_HYST	0x02
+#define LM77_REG_TEMP_CRIT	0x03
+#define LM77_REG_TEMP_MIN	0x04
+#define LM77_REG_TEMP_MAX	0x05
+
+/* Each client has this additional data */
+struct lm77_data {
+	struct i2c_client	client;
+	struct semaphore	update_lock;
+	char			valid;
+	unsigned long		last_updated;	/* In jiffies */
+	int			temp_input;	/* Temperatures */
+	int			temp_crit;
+	int			temp_min;
+	int			temp_max;
+	int			temp_hyst;
+	u8			alarms;
+};
+
+static int lm77_attach_adapter(struct i2c_adapter *adapter);
+static int lm77_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm77_init_client(struct i2c_client *client);
+static int lm77_detach_client(struct i2c_client *client);
+static u16 lm77_read_value(struct i2c_client *client, u8 reg);
+static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value);
+
+static struct lm77_data *lm77_update_device(struct device *dev);
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver lm77_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm77",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter = lm77_attach_adapter,
+	.detach_client	= lm77_detach_client,
+};
+
+/* straight from the datasheet */
+#define LM77_TEMP_MIN (-55000)
+#define LM77_TEMP_MAX 125000
+
+/* In the temperature registers, the low 3 bits are not part of the
+   temperature values; they are the status bits. */
+static inline u16 LM77_TEMP_TO_REG(int temp)
+{
+	int ntemp = SENSORS_LIMIT(temp, LM77_TEMP_MIN, LM77_TEMP_MAX);
+	return (u16)((ntemp / 500) * 8);
+}
+
+static inline int LM77_TEMP_FROM_REG(u16 reg)
+{
+	return ((int)reg / 8) * 500;
+}
+
+/* sysfs stuff */
+
+/* read routines for temperature limits */
+#define show(value)	\
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)	\
+{								\
+	struct lm77_data *data = lm77_update_device(dev);	\
+	return sprintf(buf, "%d\n", data->value);		\
+}
+
+show(temp_input);
+show(temp_crit);
+show(temp_min);
+show(temp_max);
+show(alarms);
+
+/* read routines for hysteresis values */
+static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm77_data *data = lm77_update_device(dev);
+	return sprintf(buf, "%d\n", data->temp_crit - data->temp_hyst);
+}
+static ssize_t show_temp_min_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm77_data *data = lm77_update_device(dev);
+	return sprintf(buf, "%d\n", data->temp_min + data->temp_hyst);
+}
+static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm77_data *data = lm77_update_device(dev);
+	return sprintf(buf, "%d\n", data->temp_max - data->temp_hyst);
+}
+
+/* write routines */
+#define set(value, reg)	\
+static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)	\
+{										\
+	struct i2c_client *client = to_i2c_client(dev);				\
+	struct lm77_data *data = i2c_get_clientdata(client);			\
+	long val = simple_strtoul(buf, NULL, 10);				\
+										\
+	down(&data->update_lock);						\
+	data->value = val;				\
+	lm77_write_value(client, reg, LM77_TEMP_TO_REG(data->value));		\
+	up(&data->update_lock);							\
+	return count;								\
+}
+
+set(temp_min, LM77_REG_TEMP_MIN);
+set(temp_max, LM77_REG_TEMP_MAX);
+
+/* hysteresis is stored as a relative value on the chip, so it has to be
+   converted first */
+static ssize_t set_temp_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm77_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst = data->temp_crit - val;
+	lm77_write_value(client, LM77_REG_TEMP_HYST,
+			 LM77_TEMP_TO_REG(data->temp_hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+/* preserve hysteresis when setting T_crit */
+static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm77_data *data = i2c_get_clientdata(client);
+	long val = simple_strtoul(buf, NULL, 10);
+	int oldcrithyst;
+	
+	down(&data->update_lock);
+	oldcrithyst = data->temp_crit - data->temp_hyst;
+	data->temp_crit = val;
+	data->temp_hyst = data->temp_crit - oldcrithyst;
+	lm77_write_value(client, LM77_REG_TEMP_CRIT,
+			 LM77_TEMP_TO_REG(data->temp_crit));
+	lm77_write_value(client, LM77_REG_TEMP_HYST,
+			 LM77_TEMP_TO_REG(data->temp_hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO,
+		   show_temp_input, NULL);
+static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+		   show_temp_crit, set_temp_crit);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+		   show_temp_min, set_temp_min);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+		   show_temp_max, set_temp_max);
+
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+		   show_temp_crit_hyst, set_temp_crit_hyst);
+static DEVICE_ATTR(temp1_min_hyst, S_IRUGO,
+		   show_temp_min_hyst, NULL);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
+		   show_temp_max_hyst, NULL);
+
+static DEVICE_ATTR(alarms, S_IRUGO,
+		   show_alarms, NULL);
+
+static int lm77_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm77_detect);
+}
+
+/* This function is called by i2c_detect */
+static int lm77_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm77_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm77_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct lm77_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm77_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm77_driver;
+	new_client->flags = 0;
+
+	/* Here comes the remaining detection.  Since the LM77 has no
+	   register dedicated to identification, we have to rely on the
+	   following tricks:
+
+	   1. the high 4 bits represent the sign and thus they should
+	      always be the same
+	   2. the high 3 bits are unused in the configuration register
+	   3. addresses 0x06 and 0x07 return the last read value
+	   4. registers cycling over 8-address boundaries
+
+	   Word-sized registers are high-byte first. */
+	if (kind < 0) {
+		int i, cur, conf, hyst, crit, min, max;
+
+		/* addresses cycling */
+		cur = i2c_smbus_read_word_data(new_client, 0);
+		conf = i2c_smbus_read_byte_data(new_client, 1);
+		hyst = i2c_smbus_read_word_data(new_client, 2);
+		crit = i2c_smbus_read_word_data(new_client, 3);
+		min = i2c_smbus_read_word_data(new_client, 4);
+		max = i2c_smbus_read_word_data(new_client, 5);
+		for (i = 8; i <= 0xff; i += 8)
+			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+			    || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+			    || i2c_smbus_read_word_data(new_client, i + 3) != crit
+			    || i2c_smbus_read_word_data(new_client, i + 4) != min
+			    || i2c_smbus_read_word_data(new_client, i + 5) != max)
+				goto exit_free;
+
+		/* sign bits */
+		if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
+		    || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0)
+		    || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
+		    || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
+		    || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
+			goto exit_free;
+
+		/* unused bits */
+		if (conf & 0xe0)
+			goto exit_free;
+
+		/* 0x06 and 0x07 return the last read value */
+		cur = i2c_smbus_read_word_data(new_client, 0);
+		if (i2c_smbus_read_word_data(new_client, 6) != cur
+		    || i2c_smbus_read_word_data(new_client, 7) != cur)
+			goto exit_free;
+		hyst = i2c_smbus_read_word_data(new_client, 2);
+		if (i2c_smbus_read_word_data(new_client, 6) != hyst
+		    || i2c_smbus_read_word_data(new_client, 7) != hyst)
+			goto exit_free;
+		min = i2c_smbus_read_word_data(new_client, 4);
+		if (i2c_smbus_read_word_data(new_client, 6) != min
+		    || i2c_smbus_read_word_data(new_client, 7) != min)
+			goto exit_free;
+
+	}
+
+	/* Determine the chip type - only one kind supported! */
+	if (kind <= 0)
+		kind = lm77;
+
+	if (kind == lm77) {
+		name = "lm77";
+	}
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM77 chip */
+	lm77_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm77_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+/* All registers are word-sized, except for the configuration register.
+   The LM77 uses the high-byte first convention. */
+static u16 lm77_read_value(struct i2c_client *client, u8 reg)
+{
+	if (reg == LM77_REG_CONF)
+		return i2c_smbus_read_byte_data(client, reg);
+	else
+		return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (reg == LM77_REG_CONF)
+		return i2c_smbus_write_byte_data(client, reg, value);
+	else
+		return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static void lm77_init_client(struct i2c_client *client)
+{
+	/* Initialize the LM77 chip - turn off shutdown mode */
+	int conf = lm77_read_value(client, LM77_REG_CONF);
+	if (conf & 1)
+		lm77_write_value(client, LM77_REG_CONF, conf & 0xfe);
+}
+
+static struct lm77_data *lm77_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm77_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(&client->dev, "Starting lm77 update\n");
+		data->temp_input =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP));
+		data->temp_hyst =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP_HYST));
+		data->temp_crit =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP_CRIT));
+		data->temp_min =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP_MIN));
+		data->temp_max =
+			LM77_TEMP_FROM_REG(lm77_read_value(client,
+							   LM77_REG_TEMP_MAX));
+		data->alarms =
+			lm77_read_value(client, LM77_REG_TEMP) & 0x0007;
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm77_init(void)
+{
+	return i2c_add_driver(&lm77_driver);
+}
+
+static void __exit sensors_lm77_exit(void)
+{
+	i2c_del_driver(&lm77_driver);
+}
+
+MODULE_AUTHOR("Andras BALI <drewie@freemail.hu>");
+MODULE_DESCRIPTION("LM77 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm77_init);
+module_exit(sensors_lm77_exit);
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
new file mode 100644
index 000000000000..29241469dcba
--- /dev/null
+++ b/drivers/hwmon/lm78.c
@@ -0,0 +1,795 @@
+/*
+    lm78.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <asm/io.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24,
+					0x25, 0x26, 0x27, 0x28, 0x29,
+					0x2a, 0x2b, 0x2c, 0x2d, 0x2e,
+					0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_3(lm78, lm78j, lm79);
+
+/* Many LM78 constants specified below */
+
+/* Length of ISA address segment */
+#define LM78_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define LM78_ADDR_REG_OFFSET 5
+#define LM78_DATA_REG_OFFSET 6
+
+/* The LM78 registers */
+#define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2)
+#define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2)
+#define LM78_REG_IN(nr) (0x20 + (nr))
+
+#define LM78_REG_FAN_MIN(nr) (0x3b + (nr))
+#define LM78_REG_FAN(nr) (0x28 + (nr))
+
+#define LM78_REG_TEMP 0x27
+#define LM78_REG_TEMP_OVER 0x39
+#define LM78_REG_TEMP_HYST 0x3a
+
+#define LM78_REG_ALARM1 0x41
+#define LM78_REG_ALARM2 0x42
+
+#define LM78_REG_VID_FANDIV 0x47
+
+#define LM78_REG_CONFIG 0x40
+#define LM78_REG_CHIPID 0x49
+#define LM78_REG_I2C_ADDR 0x48
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG 
+   variants. */
+
+/* IN: mV, (0V to 4.08V)
+   REG: 16mV/bit */
+static inline u8 IN_TO_REG(unsigned long val)
+{
+	unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
+	return (nval + 8) / 16;
+}
+#define IN_FROM_REG(val) ((val) *  16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm <= 0)
+		return 255;
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static inline int FAN_FROM_REG(u8 val, int div)
+{
+	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
+}
+
+/* TEMP: mC (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static inline s8 TEMP_TO_REG(int val)
+{
+	int nval = SENSORS_LIMIT(val, -128000, 127000) ;
+	return nval<0 ? (nval-500)/1000 : (nval+500)/1000;
+}
+
+static inline int TEMP_FROM_REG(s8 val)
+{
+	return val * 1000;
+}
+
+/* VID: mV
+   REG: (see doc/vid) */
+static inline int VID_FROM_REG(u8 val)
+{
+	return val==0x1f ? 0 : val>=0x10 ? 5100-val*100 : 2050-val*50;
+}
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* There are some complications in a module like this. First off, LM78 chips
+   may be both present on the SMBus and the ISA bus, and we have to handle
+   those cases separately at some places. Second, there might be several
+   LM78 chips available (well, actually, that is probably never done; but
+   it is a clean illustration of how to handle a case like that). Finally,
+   a specific chip may be attached to *both* ISA and SMBus, and we would
+   not like to detect it double. Fortunately, in the case of the LM78 at
+   least, a register tells us what SMBus address we are on, so that helps
+   a bit - except if there could be more than one SMBus. Groan. No solution
+   for this yet. */
+
+/* This module may seem overly long and complicated. In fact, it is not so
+   bad. Quite a lot of bookkeeping is done. A real driver can often cut
+   some corners. */
+
+/* For each registered LM78, we need to keep some data in memory. That
+   data is pointed to by lm78_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new lm78 client is
+   allocated. */
+struct lm78_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 in[7];		/* Register value */
+	u8 in_max[7];		/* Register value */
+	u8 in_min[7];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	s8 temp;		/* Register value */
+	s8 temp_over;		/* Register value */
+	s8 temp_hyst;		/* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+
+static int lm78_attach_adapter(struct i2c_adapter *adapter);
+static int lm78_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm78_detach_client(struct i2c_client *client);
+
+static int lm78_read_value(struct i2c_client *client, u8 register);
+static int lm78_write_value(struct i2c_client *client, u8 register, u8 value);
+static struct lm78_data *lm78_update_device(struct device *dev);
+static void lm78_init_client(struct i2c_client *client);
+
+
+static struct i2c_driver lm78_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm78",
+	.id		= I2C_DRIVERID_LM78,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm78_attach_adapter,
+	.detach_client	= lm78_detach_client,
+};
+
+/* 7 Voltages */
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val);
+	lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_max(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val);
+	lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+	
+#define show_in_offset(offset)					\
+static ssize_t							\
+	show_in##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{								\
+	return show_in(dev, buf, offset);			\
+}								\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, 		\
+		show_in##offset, NULL);				\
+static ssize_t							\
+	show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)   \
+{								\
+	return show_in_min(dev, buf, offset);			\
+}								\
+static ssize_t							\
+	show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)   \
+{								\
+	return show_in_max(dev, buf, offset);			\
+}								\
+static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_min(dev, buf, count, offset);		\
+}								\
+static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_max(dev, buf, count, offset);		\
+}								\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_min, set_in##offset##_min);	\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+show_in_offset(5);
+show_in_offset(6);
+
+/* Temperature */
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_over = TEMP_TO_REG(val);
+	lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
+}
+
+static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst = TEMP_TO_REG(val);
+	lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+		show_temp_over, set_temp_over);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
+		show_temp_hyst, set_temp_hyst);
+
+/* 3 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	unsigned long min;
+	u8 reg;
+
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   DIV_FROM_REG(data->fan_div[nr]));
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			"supported. Choose one of 1, 2, 4 or 8!\n", val);
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	reg = lm78_read_value(client, LM78_REG_VID_FANDIV);
+	switch (nr) {
+	case 0:
+		reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
+		break;
+	case 1:
+		reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
+		break;
+	}
+	lm78_write_value(client, LM78_REG_VID_FANDIV, reg);
+
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)  \
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)  \
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 0) ;
+}
+
+static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 1) ;
+}
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+
+/* Fan 3 divisor is locked in H/W */
+static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+		show_fan_1_div, set_fan_1_div);
+static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
+		show_fan_2_div, set_fan_2_div);
+static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL);
+
+/* VID */
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%d\n", VID_FROM_REG(data->vid));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm78_data *data = lm78_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/* This function is called when:
+     * lm78_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and lm78_driver is still present) */
+static int lm78_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm78_detect);
+}
+
+/* This function is called by i2c_detect */
+int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i, err;
+	struct i2c_client *new_client;
+	struct lm78_data *data;
+	const char *client_name = "";
+	int is_isa = i2c_is_isa_adapter(adapter);
+
+	if (!is_isa &&
+	    !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	/* Reserve the ISA region */
+	if (is_isa)
+		if (!request_region(address, LM78_EXTENT, lm78_driver.name)) {
+			err = -EBUSY;
+			goto ERROR0;
+		}
+
+	/* Probe whether there is anything available on this address. Already
+	   done for SMBus clients */
+	if (kind < 0) {
+		if (is_isa) {
+
+#define REALLY_SLOW_IO
+			/* We need the timeouts for at least some LM78-like
+			   chips. But only if we read 'undefined' registers. */
+			i = inb_p(address + 1);
+			if (inb_p(address + 2) != i) {
+				err = -ENODEV;
+				goto ERROR1;
+			}
+			if (inb_p(address + 3) != i) {
+				err = -ENODEV;
+				goto ERROR1;
+			}
+			if (inb_p(address + 7) != i) {
+				err = -ENODEV;
+				goto ERROR1;
+			}
+#undef REALLY_SLOW_IO
+
+			/* Let's just hope nothing breaks here */
+			i = inb_p(address + 5) & 0x7f;
+			outb_p(~i & 0x7f, address + 5);
+			if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) {
+				outb_p(i, address + 5);
+				err = -ENODEV;
+				goto ERROR1;
+			}
+		}
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm78_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+	memset(data, 0, sizeof(struct lm78_data));
+
+	new_client = &data->client;
+	if (is_isa)
+		init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm78_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+	if (kind < 0) {
+		if (lm78_read_value(new_client, LM78_REG_CONFIG) & 0x80) {
+			err = -ENODEV;
+			goto ERROR2;
+		}
+		if (!is_isa && (lm78_read_value(
+				new_client, LM78_REG_I2C_ADDR) != address)) {
+			err = -ENODEV;
+			goto ERROR2;
+		}
+	}
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		i = lm78_read_value(new_client, LM78_REG_CHIPID);
+		if (i == 0x00 || i == 0x20)
+			kind = lm78;
+		else if (i == 0x40)
+			kind = lm78j;
+		else if ((i & 0xfe) == 0xc0)
+			kind = lm79;
+		else {
+			if (kind == 0)
+				dev_warn(&adapter->dev, "Ignoring 'force' "
+					"parameter for unknown chip at "
+					"adapter %d, address 0x%02x\n",
+					i2c_adapter_id(adapter), address);
+			err = -ENODEV;
+			goto ERROR2;
+		}
+	}
+
+	if (kind == lm78) {
+		client_name = "lm78";
+	} else if (kind == lm78j) {
+		client_name = "lm78-j";
+	} else if (kind == lm79) {
+		client_name = "lm79";
+	}
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+	data->type = kind;
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	/* Initialize the LM78 chip */
+	lm78_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 0; i < 3; i++) {
+		data->fan_min[i] = lm78_read_value(new_client,
+					LM78_REG_FAN_MIN(i));
+	}
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_in6_input);
+	device_create_file(&new_client->dev, &dev_attr_in6_min);
+	device_create_file(&new_client->dev, &dev_attr_in6_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_min);
+	device_create_file(&new_client->dev, &dev_attr_fan3_div);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+
+	return 0;
+
+ERROR2:
+	kfree(data);
+ERROR1:
+	if (is_isa)
+		release_region(address, LM78_EXTENT);
+ERROR0:
+	return err;
+}
+
+static int lm78_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		    "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if(i2c_is_isa_client(client))
+		release_region(client->addr, LM78_EXTENT);
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+/* The SMBus locks itself, but ISA access must be locked explicitly! 
+   We don't want to lock the whole ISA bus, so we lock each client
+   separately.
+   We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the LM78 access and should not be necessary.  */
+static int lm78_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+	if (i2c_is_isa_client(client)) {
+		struct lm78_data *data = i2c_get_clientdata(client);
+		down(&data->lock);
+		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
+		res = inb_p(client->addr + LM78_DATA_REG_OFFSET);
+		up(&data->lock);
+		return res;
+	} else
+		return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* The SMBus locks itself, but ISA access muse be locked explicitly! 
+   We don't want to lock the whole ISA bus, so we lock each client
+   separately.
+   We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the LM78 access and should not be necessary. 
+   There are some ugly typecasts here, but the good new is - they should
+   nowhere else be necessary! */
+static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	if (i2c_is_isa_client(client)) {
+		struct lm78_data *data = i2c_get_clientdata(client);
+		down(&data->lock);
+		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
+		outb_p(value, client->addr + LM78_DATA_REG_OFFSET);
+		up(&data->lock);
+		return 0;
+	} else
+		return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Called when we have found a new LM78. It should set limits, etc. */
+static void lm78_init_client(struct i2c_client *client)
+{
+	u8 config = lm78_read_value(client, LM78_REG_CONFIG);
+
+	/* Start monitoring */
+	if (!(config & 0x01))
+		lm78_write_value(client, LM78_REG_CONFIG,
+				 (config & 0xf7) | 0x01);
+}
+
+static struct lm78_data *lm78_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm78_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting lm78 update\n");
+
+		for (i = 0; i <= 6; i++) {
+			data->in[i] =
+			    lm78_read_value(client, LM78_REG_IN(i));
+			data->in_min[i] =
+			    lm78_read_value(client, LM78_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm78_read_value(client, LM78_REG_IN_MAX(i));
+		}
+		for (i = 0; i < 3; i++) {
+			data->fan[i] =
+			    lm78_read_value(client, LM78_REG_FAN(i));
+			data->fan_min[i] =
+			    lm78_read_value(client, LM78_REG_FAN_MIN(i));
+		}
+		data->temp = lm78_read_value(client, LM78_REG_TEMP);
+		data->temp_over =
+		    lm78_read_value(client, LM78_REG_TEMP_OVER);
+		data->temp_hyst =
+		    lm78_read_value(client, LM78_REG_TEMP_HYST);
+		i = lm78_read_value(client, LM78_REG_VID_FANDIV);
+		data->vid = i & 0x0f;
+		if (data->type == lm79)
+			data->vid |=
+			    (lm78_read_value(client, LM78_REG_CHIPID) &
+			     0x01) << 4;
+		else
+			data->vid |= 0x10;
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+		data->alarms = lm78_read_value(client, LM78_REG_ALARM1) +
+		    (lm78_read_value(client, LM78_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+
+		data->fan_div[2] = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sm_lm78_init(void)
+{
+	return i2c_add_driver(&lm78_driver);
+}
+
+static void __exit sm_lm78_exit(void)
+{
+	i2c_del_driver(&lm78_driver);
+}
+
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("LM78, LM78-J and LM79 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sm_lm78_init);
+module_exit(sm_lm78_exit);
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
new file mode 100644
index 000000000000..8100595feb44
--- /dev/null
+++ b/drivers/hwmon/lm80.c
@@ -0,0 +1,601 @@
+/*
+ * lm80.c - From lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (C) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
+ * and Philip Edelbrock <phil@netroedge.com>
+ *
+ * Ported to Linux 2.6 by Tiago Sousa <mirage@kaotik.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c,
+					0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(lm80);
+
+/* Many LM80 constants specified below */
+
+/* The LM80 registers */
+#define LM80_REG_IN_MAX(nr)		(0x2a + (nr) * 2)
+#define LM80_REG_IN_MIN(nr)		(0x2b + (nr) * 2)
+#define LM80_REG_IN(nr)			(0x20 + (nr))
+
+#define LM80_REG_FAN1			0x28
+#define LM80_REG_FAN2			0x29
+#define LM80_REG_FAN_MIN(nr)		(0x3b + (nr))
+
+#define LM80_REG_TEMP			0x27
+#define LM80_REG_TEMP_HOT_MAX		0x38
+#define LM80_REG_TEMP_HOT_HYST		0x39
+#define LM80_REG_TEMP_OS_MAX		0x3a
+#define LM80_REG_TEMP_OS_HYST		0x3b
+
+#define LM80_REG_CONFIG			0x00
+#define LM80_REG_ALARM1			0x01
+#define LM80_REG_ALARM2			0x02
+#define LM80_REG_MASK1			0x03
+#define LM80_REG_MASK2			0x04
+#define LM80_REG_FANDIV			0x05
+#define LM80_REG_RES			0x06
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+
+#define IN_TO_REG(val)		(SENSORS_LIMIT(((val)+5)/10,0,255))
+#define IN_FROM_REG(val)	((val)*10)
+
+static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254);
+}
+
+#define FAN_FROM_REG(val,div)	((val)==0?-1:\
+				(val)==255?0:1350000/((div)*(val)))
+
+static inline long TEMP_FROM_REG(u16 temp)
+{
+	long res;
+
+	temp >>= 4;
+	if (temp < 0x0800)
+		res = 625 * (long) temp;
+	else
+		res = ((long) temp - 0x01000) * 625;
+
+	return res / 10;
+}
+
+#define TEMP_LIMIT_FROM_REG(val)	(((val)>0x80?(val)-0x100:(val))*1000)
+
+#define TEMP_LIMIT_TO_REG(val)		SENSORS_LIMIT((val)<0?\
+					((val)-500)/1000:((val)+500)/1000,0,255)
+
+#define DIV_FROM_REG(val)		(1 << (val))
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm80_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 in[7];		/* Register value */
+	u8 in_max[7];		/* Register value */
+	u8 in_min[7];		/* Register value */
+	u8 fan[2];		/* Register value */
+	u8 fan_min[2];		/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u16 temp;		/* Register values, shifted right */
+	u8 temp_hot_max;	/* Register value */
+	u8 temp_hot_hyst;	/* Register value */
+	u8 temp_os_max;		/* Register value */
+	u8 temp_os_hyst;	/* Register value */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+/* 
+ * Functions declaration
+ */
+
+static int lm80_attach_adapter(struct i2c_adapter *adapter);
+static int lm80_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm80_init_client(struct i2c_client *client);
+static int lm80_detach_client(struct i2c_client *client);
+static struct lm80_data *lm80_update_device(struct device *dev);
+static int lm80_read_value(struct i2c_client *client, u8 reg);
+static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm80_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm80",
+	.id		= I2C_DRIVERID_LM80,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm80_attach_adapter,
+	.detach_client	= lm80_detach_client,
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_in(suffix, value) \
+static ssize_t show_in_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm80_data *data = lm80_update_device(dev); \
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->value)); \
+}
+show_in(min0, in_min[0]);
+show_in(min1, in_min[1]);
+show_in(min2, in_min[2]);
+show_in(min3, in_min[3]);
+show_in(min4, in_min[4]);
+show_in(min5, in_min[5]);
+show_in(min6, in_min[6]);
+show_in(max0, in_max[0]);
+show_in(max1, in_max[1]);
+show_in(max2, in_max[2]);
+show_in(max3, in_max[3]);
+show_in(max4, in_max[4]);
+show_in(max5, in_max[5]);
+show_in(max6, in_max[6]);
+show_in(input0, in[0]);
+show_in(input1, in[1]);
+show_in(input2, in[2]);
+show_in(input3, in[3]);
+show_in(input4, in[4]);
+show_in(input5, in[5]);
+show_in(input6, in[6]);
+
+#define set_in(suffix, value, reg) \
+static ssize_t set_in_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm80_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock);\
+	data->value = IN_TO_REG(val); \
+	lm80_write_value(client, reg, data->value); \
+	up(&data->update_lock);\
+	return count; \
+}
+set_in(min0, in_min[0], LM80_REG_IN_MIN(0));
+set_in(min1, in_min[1], LM80_REG_IN_MIN(1));
+set_in(min2, in_min[2], LM80_REG_IN_MIN(2));
+set_in(min3, in_min[3], LM80_REG_IN_MIN(3));
+set_in(min4, in_min[4], LM80_REG_IN_MIN(4));
+set_in(min5, in_min[5], LM80_REG_IN_MIN(5));
+set_in(min6, in_min[6], LM80_REG_IN_MIN(6));
+set_in(max0, in_max[0], LM80_REG_IN_MAX(0));
+set_in(max1, in_max[1], LM80_REG_IN_MAX(1));
+set_in(max2, in_max[2], LM80_REG_IN_MAX(2));
+set_in(max3, in_max[3], LM80_REG_IN_MAX(3));
+set_in(max4, in_max[4], LM80_REG_IN_MAX(4));
+set_in(max5, in_max[5], LM80_REG_IN_MAX(5));
+set_in(max6, in_max[6], LM80_REG_IN_MAX(6));
+
+#define show_fan(suffix, value, div) \
+static ssize_t show_fan_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm80_data *data = lm80_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->value, \
+		       DIV_FROM_REG(data->div))); \
+}
+show_fan(min1, fan_min[0], fan_div[0]);
+show_fan(min2, fan_min[1], fan_div[1]);
+show_fan(input1, fan[0], fan_div[0]);
+show_fan(input2, fan[1], fan_div[1]);
+
+#define show_fan_div(suffix, value) \
+static ssize_t show_fan_div##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm80_data *data = lm80_update_device(dev); \
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->value)); \
+}
+show_fan_div(1, fan_div[0]);
+show_fan_div(2, fan_div[1]);
+
+#define set_fan(suffix, value, reg, div) \
+static ssize_t set_fan_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm80_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock);\
+	data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \
+	lm80_write_value(client, reg, data->value); \
+	up(&data->update_lock);\
+	return count; \
+}
+set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]);
+set_fan(min2, fan_min[1], LM80_REG_FAN_MIN(2), fan_div[1]);
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm80_data *data = i2c_get_clientdata(client);
+	unsigned long min, val = simple_strtoul(buf, NULL, 10);
+	u8 reg;
+
+	/* Save fan_min */
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   DIV_FROM_REG(data->fan_div[nr]));
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			"supported. Choose one of 1, 2, 4 or 8!\n", val);
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1))))
+	    | (data->fan_div[nr] << (2 * (nr + 1)));
+	lm80_write_value(client, LM80_REG_FANDIV, reg);
+
+	/* Restore fan_min */
+	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define set_fan_div(number) \
+static ssize_t set_fan_div##number(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	return set_fan_div(dev, buf, count, number - 1); \
+}
+set_fan_div(1);
+set_fan_div(2);
+
+static ssize_t show_temp_input1(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm80_data *data = lm80_update_device(dev);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp));
+}
+
+#define show_temp(suffix, value) \
+static ssize_t show_temp_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm80_data *data = lm80_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \
+}
+show_temp(hot_max, temp_hot_max);
+show_temp(hot_hyst, temp_hot_hyst);
+show_temp(os_max, temp_os_max);
+show_temp(os_hyst, temp_os_hyst);
+
+#define set_temp(suffix, value, reg) \
+static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm80_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP_LIMIT_TO_REG(val); \
+	lm80_write_value(client, reg, data->value); \
+	up(&data->update_lock); \
+	return count; \
+}
+set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX);
+set_temp(hot_hyst, temp_hot_hyst, LM80_REG_TEMP_HOT_HYST);
+set_temp(os_max, temp_os_max, LM80_REG_TEMP_OS_MAX);
+set_temp(os_hyst, temp_os_hyst, LM80_REG_TEMP_OS_HYST);
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm80_data *data = lm80_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min0, set_in_min0);
+static DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min1, set_in_min1);
+static DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min2, set_in_min2);
+static DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min3, set_in_min3);
+static DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min4, set_in_min4);
+static DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min5, set_in_min5);
+static DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min6, set_in_min6);
+static DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max0, set_in_max0);
+static DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max1, set_in_max1);
+static DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max2, set_in_max2);
+static DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max3, set_in_max3);
+static DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max4, set_in_max4);
+static DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max5, set_in_max5);
+static DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max6, set_in_max6);
+static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
+static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
+static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
+static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
+static DEVICE_ATTR(in4_input, S_IRUGO, show_in_input4, NULL);
+static DEVICE_ATTR(in5_input, S_IRUGO, show_in_input5, NULL);
+static DEVICE_ATTR(in6_input, S_IRUGO, show_in_input6, NULL);
+static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min1,
+    set_fan_min1);
+static DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min2,
+    set_fan_min2);
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
+static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
+static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div1, set_fan_div1);
+static DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div2, set_fan_div2);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_hot_max,
+    set_temp_hot_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hot_hyst,
+    set_temp_hot_hyst);
+static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_os_max,
+    set_temp_os_max);
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_os_hyst,
+    set_temp_os_hyst);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm80_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm80_detect);
+}
+
+int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i, cur;
+	struct i2c_client *new_client;
+	struct lm80_data *data;
+	int err = 0;
+	const char *name;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm80_{read,write}_value. */
+	if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm80_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm80_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. It is lousy. */
+	if (lm80_read_value(new_client, LM80_REG_ALARM2) & 0xc0)
+		goto error_free;
+	for (i = 0x2a; i <= 0x3d; i++) {
+		cur = i2c_smbus_read_byte_data(new_client, i);
+		if ((i2c_smbus_read_byte_data(new_client, i + 0x40) != cur)
+		 || (i2c_smbus_read_byte_data(new_client, i + 0x80) != cur)
+		 || (i2c_smbus_read_byte_data(new_client, i + 0xc0) != cur))
+		    goto error_free;
+	}
+
+	/* Determine the chip type - only one kind supported! */
+	kind = lm80;
+	name = "lm80";
+
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto error_free;
+
+	/* Initialize the LM80 chip */
+	lm80_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	data->fan_min[0] = lm80_read_value(new_client, LM80_REG_FAN_MIN(1));
+	data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2));
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in5_min);
+	device_create_file(&new_client->dev, &dev_attr_in6_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_in5_max);
+	device_create_file(&new_client->dev, &dev_attr_in6_max);
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in5_input);
+	device_create_file(&new_client->dev, &dev_attr_in6_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+error_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm80_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static int lm80_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Called when we have found a new LM80. */
+static void lm80_init_client(struct i2c_client *client)
+{
+	/* Reset all except Watchdog values and last conversion values
+	   This sets fan-divs to 2, among others. This makes most other
+	   initializations unnecessary */
+	lm80_write_value(client, LM80_REG_CONFIG, 0x80);
+	/* Set 11-bit temperature resolution */
+	lm80_write_value(client, LM80_REG_RES, 0x08);
+
+	/* Start monitoring */
+	lm80_write_value(client, LM80_REG_CONFIG, 0x01);
+}
+
+static struct lm80_data *lm80_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm80_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+		dev_dbg(&client->dev, "Starting lm80 update\n");
+		for (i = 0; i <= 6; i++) {
+			data->in[i] =
+			    lm80_read_value(client, LM80_REG_IN(i));
+			data->in_min[i] =
+			    lm80_read_value(client, LM80_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm80_read_value(client, LM80_REG_IN_MAX(i));
+		}
+		data->fan[0] = lm80_read_value(client, LM80_REG_FAN1);
+		data->fan_min[0] =
+		    lm80_read_value(client, LM80_REG_FAN_MIN(1));
+		data->fan[1] = lm80_read_value(client, LM80_REG_FAN2);
+		data->fan_min[1] =
+		    lm80_read_value(client, LM80_REG_FAN_MIN(2));
+
+		data->temp =
+		    (lm80_read_value(client, LM80_REG_TEMP) << 8) |
+		    (lm80_read_value(client, LM80_REG_RES) & 0xf0);
+		data->temp_os_max =
+		    lm80_read_value(client, LM80_REG_TEMP_OS_MAX);
+		data->temp_os_hyst =
+		    lm80_read_value(client, LM80_REG_TEMP_OS_HYST);
+		data->temp_hot_max =
+		    lm80_read_value(client, LM80_REG_TEMP_HOT_MAX);
+		data->temp_hot_hyst =
+		    lm80_read_value(client, LM80_REG_TEMP_HOT_HYST);
+
+		i = lm80_read_value(client, LM80_REG_FANDIV);
+		data->fan_div[0] = (i >> 2) & 0x03;
+		data->fan_div[1] = (i >> 4) & 0x03;
+		data->alarms = lm80_read_value(client, LM80_REG_ALARM1) +
+		    (lm80_read_value(client, LM80_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm80_init(void)
+{
+	return i2c_add_driver(&lm80_driver);
+}
+
+static void __exit sensors_lm80_exit(void)
+{
+	i2c_del_driver(&lm80_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+	"Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("LM80 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm80_init);
+module_exit(sensors_lm80_exit);
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
new file mode 100644
index 000000000000..a49008b444c8
--- /dev/null
+++ b/drivers/hwmon/lm83.c
@@ -0,0 +1,408 @@
+/*
+ * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
+ *          monitoring
+ * Copyright (C) 2003-2005  Jean Delvare <khali@linux-fr.org>
+ *
+ * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
+ * a sensor chip made by National Semiconductor. It reports up to four
+ * temperatures (its own plus up to three external ones) with a 1 deg
+ * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained
+ * from National's website at:
+ *   http://www.national.com/pf/LM/LM83.html
+ * Since the datasheet omits to give the chip stepping code, I give it
+ * here: 0x03 (at register 0xff).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * Addresses to scan
+ * Address is selected using 2 three-level pins, resulting in 9 possible
+ * addresses.
+ */
+
+static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
+					0x29, 0x2a, 0x2b,
+					0x4c, 0x4d, 0x4e,
+					I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(lm83);
+
+/*
+ * The LM83 registers
+ * Manufacturer ID is 0x01 for National Semiconductor.
+ */
+
+#define LM83_REG_R_MAN_ID		0xFE
+#define LM83_REG_R_CHIP_ID		0xFF
+#define LM83_REG_R_CONFIG		0x03
+#define LM83_REG_W_CONFIG		0x09
+#define LM83_REG_R_STATUS1		0x02
+#define LM83_REG_R_STATUS2		0x35
+#define LM83_REG_R_LOCAL_TEMP		0x00
+#define LM83_REG_R_LOCAL_HIGH		0x05
+#define LM83_REG_W_LOCAL_HIGH		0x0B
+#define LM83_REG_R_REMOTE1_TEMP		0x30
+#define LM83_REG_R_REMOTE1_HIGH		0x38
+#define LM83_REG_W_REMOTE1_HIGH		0x50
+#define LM83_REG_R_REMOTE2_TEMP		0x01
+#define LM83_REG_R_REMOTE2_HIGH		0x07
+#define LM83_REG_W_REMOTE2_HIGH		0x0D
+#define LM83_REG_R_REMOTE3_TEMP		0x31
+#define LM83_REG_R_REMOTE3_HIGH		0x3A
+#define LM83_REG_W_REMOTE3_HIGH		0x52
+#define LM83_REG_R_TCRIT		0x42
+#define LM83_REG_W_TCRIT		0x5A
+
+/*
+ * Conversions and various macros
+ * The LM83 uses signed 8-bit values with LSB = 1 degree Celsius.
+ */
+
+#define TEMP_FROM_REG(val)	((val) * 1000)
+#define TEMP_TO_REG(val)	((val) <= -128000 ? -128 : \
+				 (val) >= 127000 ? 127 : \
+				 (val) < 0 ? ((val) - 500) / 1000 : \
+				 ((val) + 500) / 1000)
+
+static const u8 LM83_REG_R_TEMP[] = {
+	LM83_REG_R_LOCAL_TEMP,
+	LM83_REG_R_REMOTE1_TEMP,
+	LM83_REG_R_REMOTE2_TEMP,
+	LM83_REG_R_REMOTE3_TEMP,
+	LM83_REG_R_LOCAL_HIGH,
+	LM83_REG_R_REMOTE1_HIGH,
+	LM83_REG_R_REMOTE2_HIGH,
+	LM83_REG_R_REMOTE3_HIGH,
+	LM83_REG_R_TCRIT,
+};
+
+static const u8 LM83_REG_W_HIGH[] = {
+	LM83_REG_W_LOCAL_HIGH,
+	LM83_REG_W_REMOTE1_HIGH,
+	LM83_REG_W_REMOTE2_HIGH,
+	LM83_REG_W_REMOTE3_HIGH,
+	LM83_REG_W_TCRIT,
+};
+
+/*
+ * Functions declaration
+ */
+
+static int lm83_attach_adapter(struct i2c_adapter *adapter);
+static int lm83_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm83_detach_client(struct i2c_client *client);
+static struct lm83_data *lm83_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+ 
+static struct i2c_driver lm83_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm83",
+	.id		= I2C_DRIVERID_LM83,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm83_attach_adapter,
+	.detach_client	= lm83_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm83_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	s8 temp[9];	/* 0..3: input 1-4,
+			   4..7: high limit 1-4,
+			   8   : critical limit */
+	u16 alarms; /* bitvector, combined */
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm83_data *data = lm83_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *devattr,
+			const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm83_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int nr = attr->index;
+
+	down(&data->update_lock);
+	data->temp[nr] = TEMP_TO_REG(val);
+	i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
+				  data->temp[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy,
+			   char *buf)
+{
+	struct lm83_data *data = lm83_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp,
+	set_temp, 4);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp,
+	set_temp, 5);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp,
+	set_temp, 6);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp,
+	set_temp, 7);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
+	set_temp, 8);
+static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm83_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm83_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm83_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm83_data));
+
+	/* The common I2C client data is placed right after the
+	 * LM83-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm83_driver;
+	new_client->flags = 0;
+
+	/* Now we do the detection and identification. A negative kind
+	 * means that the driver was loaded with no force parameter
+	 * (default), so we must both detect and identify the chip
+	 * (actually there is only one possible kind of chip for now, LM83).
+	 * A zero kind means that the driver was loaded with the force
+	 * parameter, the detection step shall be skipped. A positive kind
+	 * means that the driver was loaded with the force parameter and a
+	 * given kind of chip is requested, so both the detection and the
+	 * identification steps are skipped. */
+
+	/* Default to an LM83 if forced */
+	if (kind == 0)
+		kind = lm83;
+
+	if (kind < 0) { /* detection */
+		if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
+		    & 0xA8) != 0x00) ||
+		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
+		    & 0x48) != 0x00) ||
+		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
+		    & 0x41) != 0x00)) {
+			dev_dbg(&adapter->dev,
+			    "LM83 detection failed at 0x%02x.\n", address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+		u8 man_id, chip_id;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+		    LM83_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+		    LM83_REG_R_CHIP_ID);
+
+		if (man_id == 0x01) { /* National Semiconductor */
+			if (chip_id == 0x03) {
+				kind = lm83;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	if (kind == lm83) {
+		name = "lm83";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/*
+	 * Initialize the LM83 chip
+	 * (Nothing to do for this one.)
+	 */
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp3_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp4_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp3_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp4_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_crit.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_crit.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp3_crit.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp4_crit.dev_attr);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm83_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		    "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm83_data *lm83_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm83_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		int nr;
+
+		dev_dbg(&client->dev, "Updating lm83 data.\n");
+		for (nr = 0; nr < 9; nr++) {
+			data->temp[nr] =
+			    i2c_smbus_read_byte_data(client,
+			    LM83_REG_R_TEMP[nr]);
+		}
+		data->alarms =
+		    i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1)
+		    + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2)
+		    << 8);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm83_init(void)
+{
+	return i2c_add_driver(&lm83_driver);
+}
+
+static void __exit sensors_lm83_exit(void)
+{
+	i2c_del_driver(&lm83_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM83 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm83_init);
+module_exit(sensors_lm83_exit);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
new file mode 100644
index 000000000000..b4d7fd418264
--- /dev/null
+++ b/drivers/hwmon/lm85.c
@@ -0,0 +1,1575 @@
+/*
+    lm85.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+    Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
+    Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
+    Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
+
+    Chip details at	      <http://www.national.com/ds/LM/LM85.pdf>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
+
+/* The LM85 registers */
+
+#define	LM85_REG_IN(nr)			(0x20 + (nr))
+#define	LM85_REG_IN_MIN(nr)		(0x44 + (nr) * 2)
+#define	LM85_REG_IN_MAX(nr)		(0x45 + (nr) * 2)
+
+#define	LM85_REG_TEMP(nr)		(0x25 + (nr))
+#define	LM85_REG_TEMP_MIN(nr)		(0x4e + (nr) * 2)
+#define	LM85_REG_TEMP_MAX(nr)		(0x4f + (nr) * 2)
+
+/* Fan speeds are LSB, MSB (2 bytes) */
+#define	LM85_REG_FAN(nr)		(0x28 + (nr) *2)
+#define	LM85_REG_FAN_MIN(nr)		(0x54 + (nr) *2)
+
+#define	LM85_REG_PWM(nr)		(0x30 + (nr))
+
+#define	ADT7463_REG_OPPOINT(nr)		(0x33 + (nr))
+
+#define	ADT7463_REG_TMIN_CTL1		0x36
+#define	ADT7463_REG_TMIN_CTL2		0x37
+
+#define	LM85_REG_DEVICE			0x3d
+#define	LM85_REG_COMPANY		0x3e
+#define	LM85_REG_VERSTEP		0x3f
+/* These are the recognized values for the above regs */
+#define	LM85_DEVICE_ADX			0x27
+#define	LM85_COMPANY_NATIONAL		0x01
+#define	LM85_COMPANY_ANALOG_DEV		0x41
+#define	LM85_COMPANY_SMSC      		0x5c
+#define	LM85_VERSTEP_VMASK              0xf0
+#define	LM85_VERSTEP_GENERIC		0x60
+#define	LM85_VERSTEP_LM85C		0x60
+#define	LM85_VERSTEP_LM85B		0x62
+#define	LM85_VERSTEP_ADM1027		0x60
+#define	LM85_VERSTEP_ADT7463		0x62
+#define	LM85_VERSTEP_ADT7463C		0x6A
+#define	LM85_VERSTEP_EMC6D100_A0        0x60
+#define	LM85_VERSTEP_EMC6D100_A1        0x61
+#define	LM85_VERSTEP_EMC6D102		0x65
+
+#define	LM85_REG_CONFIG			0x40
+
+#define	LM85_REG_ALARM1			0x41
+#define	LM85_REG_ALARM2			0x42
+
+#define	LM85_REG_VID			0x43
+
+/* Automated FAN control */
+#define	LM85_REG_AFAN_CONFIG(nr)	(0x5c + (nr))
+#define	LM85_REG_AFAN_RANGE(nr)		(0x5f + (nr))
+#define	LM85_REG_AFAN_SPIKE1		0x62
+#define	LM85_REG_AFAN_SPIKE2		0x63
+#define	LM85_REG_AFAN_MINPWM(nr)	(0x64 + (nr))
+#define	LM85_REG_AFAN_LIMIT(nr)		(0x67 + (nr))
+#define	LM85_REG_AFAN_CRITICAL(nr)	(0x6a + (nr))
+#define	LM85_REG_AFAN_HYST1		0x6d
+#define	LM85_REG_AFAN_HYST2		0x6e
+
+#define	LM85_REG_TACH_MODE		0x74
+#define	LM85_REG_SPINUP_CTL		0x75
+
+#define	ADM1027_REG_TEMP_OFFSET(nr)	(0x70 + (nr))
+#define	ADM1027_REG_CONFIG2		0x73
+#define	ADM1027_REG_INTMASK1		0x74
+#define	ADM1027_REG_INTMASK2		0x75
+#define	ADM1027_REG_EXTEND_ADC1		0x76
+#define	ADM1027_REG_EXTEND_ADC2		0x77
+#define	ADM1027_REG_CONFIG3		0x78
+#define	ADM1027_REG_FAN_PPR		0x7b
+
+#define	ADT7463_REG_THERM		0x79
+#define	ADT7463_REG_THERM_LIMIT		0x7A
+
+#define EMC6D100_REG_ALARM3             0x7d
+/* IN5, IN6 and IN7 */
+#define	EMC6D100_REG_IN(nr)             (0x70 + ((nr)-5))
+#define	EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr)-5) * 2)
+#define	EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr)-5) * 2)
+#define	EMC6D102_REG_EXTEND_ADC1	0x85
+#define	EMC6D102_REG_EXTEND_ADC2	0x86
+#define	EMC6D102_REG_EXTEND_ADC3	0x87
+#define	EMC6D102_REG_EXTEND_ADC4	0x88
+
+#define	LM85_ALARM_IN0			0x0001
+#define	LM85_ALARM_IN1			0x0002
+#define	LM85_ALARM_IN2			0x0004
+#define	LM85_ALARM_IN3			0x0008
+#define	LM85_ALARM_TEMP1		0x0010
+#define	LM85_ALARM_TEMP2		0x0020
+#define	LM85_ALARM_TEMP3		0x0040
+#define	LM85_ALARM_ALARM2		0x0080
+#define	LM85_ALARM_IN4			0x0100
+#define	LM85_ALARM_RESERVED		0x0200
+#define	LM85_ALARM_FAN1			0x0400
+#define	LM85_ALARM_FAN2			0x0800
+#define	LM85_ALARM_FAN3			0x1000
+#define	LM85_ALARM_FAN4			0x2000
+#define	LM85_ALARM_TEMP1_FAULT		0x4000
+#define	LM85_ALARM_TEMP3_FAULT		0x8000
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG 
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+ */
+
+/* IN are scaled acording to built-in resistors */
+static int lm85_scaling[] = {  /* .001 Volts */
+		2500, 2250, 3300, 5000, 12000,
+		3300, 1500, 1800 /*EMC6D100*/
+	};
+#define SCALE(val,from,to)		(((val)*(to) + ((from)/2))/(from))
+
+#define INS_TO_REG(n,val)	\
+		SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+
+#define INSEXT_FROM_REG(n,val,ext,scale)	\
+		SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n])
+
+#define INS_FROM_REG(n,val)   INSEXT_FROM_REG(n,val,0,1)
+
+/* FAN speed is measured using 90kHz clock */
+#define FAN_TO_REG(val)		(SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
+#define FAN_FROM_REG(val)	((val)==0?-1:(val)==0xffff?0:5400000/(val))
+
+/* Temperature is reported in .001 degC increments */
+#define TEMP_TO_REG(val)	\
+		SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
+#define TEMPEXT_FROM_REG(val,ext,scale)	\
+		SCALE((val)*scale + (ext),scale,1000)
+#define TEMP_FROM_REG(val)	\
+		TEMPEXT_FROM_REG(val,0,1)
+
+#define PWM_TO_REG(val)			(SENSORS_LIMIT(val,0,255))
+#define PWM_FROM_REG(val)		(val)
+
+
+/* ZONEs have the following parameters:
+ *    Limit (low) temp,           1. degC
+ *    Hysteresis (below limit),   1. degC (0-15)
+ *    Range of speed control,     .1 degC (2-80)
+ *    Critical (high) temp,       1. degC
+ *
+ * FAN PWMs have the following parameters:
+ *    Reference Zone,                 1, 2, 3, etc.
+ *    Spinup time,                    .05 sec
+ *    PWM value at limit/low temp,    1 count
+ *    PWM Frequency,                  1. Hz
+ *    PWM is Min or OFF below limit,  flag
+ *    Invert PWM output,              flag
+ *
+ * Some chips filter the temp, others the fan.
+ *    Filter constant (or disabled)   .1 seconds
+ */
+
+/* These are the zone temperature range encodings in .001 degree C */
+static int lm85_range_map[] = {   
+		2000,  2500,  3300,  4000,  5000,  6600,
+		8000, 10000, 13300, 16000, 20000, 26600,
+		32000, 40000, 53300, 80000
+	};
+static int RANGE_TO_REG( int range )
+{
+	int i;
+
+	if ( range < lm85_range_map[0] ) { 
+		return 0 ;
+	} else if ( range > lm85_range_map[15] ) {
+		return 15 ;
+	} else {  /* find closest match */
+		for ( i = 14 ; i >= 0 ; --i ) {
+			if ( range > lm85_range_map[i] ) { /* range bracketed */
+				if ((lm85_range_map[i+1] - range) < 
+					(range - lm85_range_map[i])) {
+					i++;
+					break;
+				}
+				break;
+			}
+		}
+	}
+	return( i & 0x0f );
+}
+#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
+
+/* These are the Acoustic Enhancement, or Temperature smoothing encodings
+ * NOTE: The enable/disable bit is INCLUDED in these encodings as the
+ *       MSB (bit 3, value 8).  If the enable bit is 0, the encoded value
+ *       is ignored, or set to 0.
+ */
+/* These are the PWM frequency encodings */
+static int lm85_freq_map[] = { /* .1 Hz */
+		100, 150, 230, 300, 380, 470, 620, 940
+	};
+static int FREQ_TO_REG( int freq )
+{
+	int i;
+
+	if( freq >= lm85_freq_map[7] ) { return 7 ; }
+	for( i = 0 ; i < 7 ; ++i )
+		if( freq <= lm85_freq_map[i] )
+			break ;
+	return( i & 0x07 );
+}
+#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07])
+
+/* Since we can't use strings, I'm abusing these numbers
+ *   to stand in for the following meanings:
+ *      1 -- PWM responds to Zone 1
+ *      2 -- PWM responds to Zone 2
+ *      3 -- PWM responds to Zone 3
+ *     23 -- PWM responds to the higher temp of Zone 2 or 3
+ *    123 -- PWM responds to highest of Zone 1, 2, or 3
+ *      0 -- PWM is always at 0% (ie, off)
+ *     -1 -- PWM is always at 100%
+ *     -2 -- PWM responds to manual control
+ */
+
+static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
+#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
+
+static int ZONE_TO_REG( int zone )
+{
+	int i;
+
+	for( i = 0 ; i <= 7 ; ++i )
+		if( zone == lm85_zone_map[i] )
+			break ;
+	if( i > 7 )   /* Not found. */
+		i = 3;  /* Always 100% */
+	return( (i & 0x07)<<5 );
+}
+
+#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15))
+#define HYST_FROM_REG(val) ((val)*1000)
+
+#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
+#define OFFSET_FROM_REG(val) ((val)*25)
+
+#define PPR_MASK(fan) (0x03<<(fan *2))
+#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
+#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
+
+/* i2c-vid.h defines vid_from_reg() */
+#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm)))
+
+/* Unlike some other drivers we DO NOT set initial limits.  Use
+ * the config file to set limits.  Some users have reported
+ * motherboards shutting down when we set limits in a previous
+ * version of the driver.
+ */
+
+/* Chip sampling rates
+ *
+ * Some sensors are not updated more frequently than once per second
+ *    so it doesn't make sense to read them more often than that.
+ *    We cache the results and return the saved data if the driver
+ *    is called again before a second has elapsed.
+ *
+ * Also, there is significant configuration data for this chip
+ *    given the automatic PWM fan control that is possible.  There
+ *    are about 47 bytes of config data to only 22 bytes of actual
+ *    readings.  So, we keep the config data up to date in the cache
+ *    when it is written and only sample it once every 1 *minute*
+ */
+#define LM85_DATA_INTERVAL  (HZ + HZ / 2)
+#define LM85_CONFIG_INTERVAL  (1 * 60 * HZ)
+
+/* For each registered LM85, we need to keep some data in memory. That
+   data is pointed to by lm85_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new lm85 client is
+   allocated. */
+
+/* LM85 can automatically adjust fan speeds based on temperature
+ * This structure encapsulates an entire Zone config.  There are
+ * three zones (one for each temperature input) on the lm85
+ */
+struct lm85_zone {
+	s8 limit;	/* Low temp limit */
+	u8 hyst;	/* Low limit hysteresis. (0-15) */
+	u8 range;	/* Temp range, encoded */
+	s8 critical;	/* "All fans ON" temp limit */
+	u8 off_desired; /* Actual "off" temperature specified.  Preserved 
+			 * to prevent "drift" as other autofan control
+			 * values change.
+			 */
+	u8 max_desired; /* Actual "max" temperature specified.  Preserved 
+			 * to prevent "drift" as other autofan control
+			 * values change.
+			 */
+};
+
+struct lm85_autofan {
+	u8 config;	/* Register value */
+	u8 freq;	/* PWM frequency, encoded */
+	u8 min_pwm;	/* Minimum PWM value, encoded */
+	u8 min_off;	/* Min PWM or OFF below "limit", flag */
+};
+
+struct lm85_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	int valid;		/* !=0 if following fields are valid */
+	unsigned long last_reading;	/* In jiffies */
+	unsigned long last_config;	/* In jiffies */
+
+	u8 in[8];		/* Register value */
+	u8 in_max[8];		/* Register value */
+	u8 in_min[8];		/* Register value */
+	s8 temp[3];		/* Register value */
+	s8 temp_min[3];		/* Register value */
+	s8 temp_max[3];		/* Register value */
+	s8 temp_offset[3];	/* Register value */
+	u16 fan[4];		/* Register value */
+	u16 fan_min[4];		/* Register value */
+	u8 pwm[3];		/* Register value */
+	u8 spinup_ctl;		/* Register encoding, combined */
+	u8 tach_mode;		/* Register encoding, combined */
+	u8 temp_ext[3];		/* Decoded values */
+	u8 in_ext[8];		/* Decoded values */
+	u8 adc_scale;		/* ADC Extended bits scaling factor */
+	u8 fan_ppr;		/* Register value */
+	u8 smooth[3];		/* Register encoding */
+	u8 vid;			/* Register value */
+	u8 vrm;			/* VRM version */
+	u8 syncpwm3;		/* Saved PWM3 for TACH 2,3,4 config */
+	u8 oppoint[3];		/* Register value */
+	u16 tmin_ctl;		/* Register value */
+	unsigned long therm_total; /* Cummulative therm count */
+	u8 therm_limit;		/* Register value */
+	u32 alarms;		/* Register encoding, combined */
+	struct lm85_autofan autofan[3];
+	struct lm85_zone zone[3];
+};
+
+static int lm85_attach_adapter(struct i2c_adapter *adapter);
+static int lm85_detect(struct i2c_adapter *adapter, int address,
+			int kind);
+static int lm85_detach_client(struct i2c_client *client);
+
+static int lm85_read_value(struct i2c_client *client, u8 register);
+static int lm85_write_value(struct i2c_client *client, u8 register, int value);
+static struct lm85_data *lm85_update_device(struct device *dev);
+static void lm85_init_client(struct i2c_client *client);
+
+
+static struct i2c_driver lm85_driver = {
+	.owner          = THIS_MODULE,
+	.name           = "lm85",
+	.id             = I2C_DRIVERID_LM85,
+	.flags          = I2C_DF_NOTIFY,
+	.attach_adapter = lm85_attach_adapter,
+	.detach_client  = lm85_detach_client,
+};
+
+
+/* 4 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val);
+	lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset,	\
+		NULL);							\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+show_fan_offset(4);
+
+/* vid, vrm, alarms */
+
+static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+
+static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+
+static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+	return count;
+}
+
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+
+static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+
+/* pwm */
+
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
+}
+static ssize_t set_pwm(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm[nr] = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	int	pwm_zone;
+
+	pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
+	return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) );
+}
+
+#define show_pwm_reg(offset)						\
+static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_pwm(dev, buf, offset - 1);				\
+}									\
+static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr,			\
+				 const char *buf, size_t count)		\
+{									\
+	return set_pwm(dev, buf, count, offset - 1);			\
+}									\
+static ssize_t show_pwm_enable##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_pwm_enable(dev, buf, offset - 1);			\
+}									\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, 			\
+		show_pwm_##offset, set_pwm_##offset);			\
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, 			\
+		show_pwm_enable##offset, NULL);
+
+show_pwm_reg(1);
+show_pwm_reg(2);
+show_pwm_reg(3);
+
+/* Voltages */
+
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(	buf, "%d\n", INSEXT_FROM_REG(nr,
+						     data->in[nr],
+						     data->in_ext[nr],
+						     data->adc_scale) );
+}
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
+}
+static ssize_t set_in_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
+}
+static ssize_t set_in_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_in_reg(offset)						\
+static ssize_t show_in_##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	return show_in(dev, buf, offset);				\
+}									\
+static ssize_t show_in_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_in_min(dev, buf, offset);				\
+}									\
+static ssize_t show_in_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_in_max(dev, buf, offset);				\
+}									\
+static ssize_t set_in_##offset##_min (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_in_min(dev, buf, count, offset);			\
+}									\
+static ssize_t set_in_##offset##_max (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_in_max(dev, buf, count, offset);			\
+}									\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, 	\
+		NULL);							\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_in_##offset##_min, set_in_##offset##_min);		\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_in_##offset##_max, set_in_##offset##_max);
+
+show_in_reg(0);
+show_in_reg(1);
+show_in_reg(2);
+show_in_reg(3);
+show_in_reg(4);
+
+/* Temps */
+
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+						    data->temp_ext[nr],
+						    data->adc_scale) );
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
+}
+static ssize_t set_temp_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
+}
+static ssize_t set_temp_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);	
+
+	down(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_temp_reg(offset)						\
+static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_temp(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_temp_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_temp_max(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_temp_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_temp_max(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset,	\
+		NULL);							\
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_min, set_temp_##offset##_min);	\
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_max, set_temp_##offset##_max);
+
+show_temp_reg(1);
+show_temp_reg(2);
+show_temp_reg(3);
+
+
+/* Automatic PWM control */
+
+static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
+}
+static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);   
+
+	down(&data->update_lock);
+	data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
+		| ZONE_TO_REG(val) ;
+	lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
+		data->autofan[nr].config);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
+}
+static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].min_pwm = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
+		data->autofan[nr].min_pwm);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", data->autofan[nr].min_off);
+}
+static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].min_off = val;
+	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
+		| data->syncpwm3
+		| (data->autofan[0].min_off ? 0x20 : 0)
+		| (data->autofan[1].min_off ? 0x40 : 0)
+		| (data->autofan[2].min_off ? 0x80 : 0)
+	);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
+}
+static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].freq = FREQ_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		(data->zone[nr].range << 4)
+		| data->autofan[nr].freq
+	); 
+	up(&data->update_lock);
+	return count;
+}
+#define pwm_auto(offset)						\
+static ssize_t show_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_channels(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_channels(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_min(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_min(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_minctl(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_freq(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1);	\
+}									\
+static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_channels,			\
+		set_pwm##offset##_auto_channels);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_min,			\
+		set_pwm##offset##_auto_pwm_min);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_minctl,			\
+		set_pwm##offset##_auto_pwm_minctl);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_freq,			\
+		set_pwm##offset##_auto_pwm_freq);              
+pwm_auto(1);
+pwm_auto(2);
+pwm_auto(3);
+
+/* Temperature settings for automatic PWM control */
+
+static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
+		HYST_FROM_REG(data->zone[nr].hyst));
+}
+static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int min;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	min = TEMP_FROM_REG(data->zone[nr].limit);
+	data->zone[nr].off_desired = TEMP_TO_REG(val);
+	data->zone[nr].hyst = HYST_TO_REG(min - val);
+	if ( nr == 0 || nr == 1 ) {
+		lm85_write_value(client, LM85_REG_AFAN_HYST1,
+			(data->zone[0].hyst << 4)
+			| data->zone[1].hyst
+			);
+	} else {
+		lm85_write_value(client, LM85_REG_AFAN_HYST2,
+			(data->zone[2].hyst << 4)
+		);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
+}
+static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->zone[nr].limit = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
+		data->zone[nr].limit);
+
+/* Update temp_auto_max and temp_auto_range */
+	data->zone[nr].range = RANGE_TO_REG(
+		TEMP_FROM_REG(data->zone[nr].max_desired) -
+		TEMP_FROM_REG(data->zone[nr].limit));
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		((data->zone[nr].range & 0x0f) << 4)
+		| (data->autofan[nr].freq & 0x07));
+
+/* Update temp_auto_hyst and temp_auto_off */
+	data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
+		data->zone[nr].limit) - TEMP_FROM_REG(
+		data->zone[nr].off_desired));
+	if ( nr == 0 || nr == 1 ) {
+		lm85_write_value(client, LM85_REG_AFAN_HYST1,
+			(data->zone[0].hyst << 4)
+			| data->zone[1].hyst
+			);
+	} else {
+		lm85_write_value(client, LM85_REG_AFAN_HYST2,
+			(data->zone[2].hyst << 4)
+		);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
+		RANGE_FROM_REG(data->zone[nr].range));
+}
+static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int min;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	min = TEMP_FROM_REG(data->zone[nr].limit);
+	data->zone[nr].max_desired = TEMP_TO_REG(val);
+	data->zone[nr].range = RANGE_TO_REG(
+		val - min);
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		((data->zone[nr].range & 0x0f) << 4)
+		| (data->autofan[nr].freq & 0x07));
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
+}
+static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->zone[nr].critical = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
+		data->zone[nr].critical);
+	up(&data->update_lock);
+	return count;
+}
+#define temp_auto(offset)						\
+static ssize_t show_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_off(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_off(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_min(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_min(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_max(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_max(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_crit(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_crit(dev, buf, count, offset - 1);	\
+}									\
+static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_off,			\
+		set_temp##offset##_auto_temp_off);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_min,			\
+		set_temp##offset##_auto_temp_min);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_max,			\
+		set_temp##offset##_auto_temp_max);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_crit,			\
+		set_temp##offset##_auto_temp_crit);
+temp_auto(1);
+temp_auto(2);
+temp_auto(3);
+
+int lm85_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm85_detect);
+}
+
+int lm85_detect(struct i2c_adapter *adapter, int address,
+		int kind)
+{
+	int company, verstep ;
+	struct i2c_client *new_client = NULL;
+	struct lm85_data *data;
+	int err = 0;
+	const char *type_name = "";
+
+	if (i2c_is_isa_adapter(adapter)) {
+		/* This chip has no ISA interface */
+		goto ERROR0 ;
+	};
+
+	if (!i2c_check_functionality(adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		/* We need to be able to do byte I/O */
+		goto ERROR0 ;
+	};
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm85_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+	memset(data, 0, sizeof(struct lm85_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm85_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	company = lm85_read_value(new_client, LM85_REG_COMPANY);
+	verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
+
+	dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
+		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+		i2c_adapter_id(new_client->adapter), new_client->addr,
+		company, verstep);
+
+	/* If auto-detecting, Determine the chip type. */
+	if (kind <= 0) {
+		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
+			i2c_adapter_id(adapter), address );
+		if( company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85C ) {
+			kind = lm85c ;
+		} else if( company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85B ) {
+			kind = lm85b ;
+		} else if( company == LM85_COMPANY_NATIONAL
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
+				" Defaulting to LM85.\n", verstep);
+			kind = any_chip ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && verstep == LM85_VERSTEP_ADM1027 ) {
+			kind = adm1027 ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep == LM85_VERSTEP_ADT7463
+			 || verstep == LM85_VERSTEP_ADT7463C) ) {
+			kind = adt7463 ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
+				" Defaulting to Generic LM85.\n", verstep );
+			kind = any_chip ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && (verstep == LM85_VERSTEP_EMC6D100_A0
+			 || verstep == LM85_VERSTEP_EMC6D100_A1) ) {
+			/* Unfortunately, we can't tell a '100 from a '101
+			 * from the registers.  Since a '101 is a '100
+			 * in a package with fewer pins and therefore no
+			 * 3.3V, 1.5V or 1.8V inputs, perhaps if those
+			 * inputs read 0, then it's a '101.
+			 */
+			kind = emc6d100 ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && verstep == LM85_VERSTEP_EMC6D102) {
+			kind = emc6d102 ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
+			dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
+			    " Defaulting to Generic LM85.\n", verstep );
+			kind = any_chip ;
+		} else if( kind == any_chip
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
+			/* Leave kind as "any_chip" */
+		} else {
+			dev_dbg(&adapter->dev, "Autodetection failed\n");
+			/* Not an LM85 ... */
+			if( kind == any_chip ) {  /* User used force=x,y */
+				dev_err(&adapter->dev, "Generic LM85 Version 6 not"
+					" found at %d,0x%02x. Try force_lm85c.\n",
+					i2c_adapter_id(adapter), address );
+			}
+			err = 0 ;
+			goto ERROR1;
+		}
+	}
+
+	/* Fill in the chip specific driver values */
+	if ( kind == any_chip ) {
+		type_name = "lm85";
+	} else if ( kind == lm85b ) {
+		type_name = "lm85b";
+	} else if ( kind == lm85c ) {
+		type_name = "lm85c";
+	} else if ( kind == adm1027 ) {
+		type_name = "adm1027";
+	} else if ( kind == adt7463 ) {
+		type_name = "adt7463";
+	} else if ( kind == emc6d100){
+		type_name = "emc6d100";
+	} else if ( kind == emc6d102 ) {
+		type_name = "emc6d102";
+	}
+	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+
+	/* Fill in the remaining client fields */
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR1;
+
+	/* Set the VRM version */
+	data->vrm = i2c_which_vrm();
+
+	/* Initialize the LM85 chip */
+	lm85_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan4_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan3_min);
+	device_create_file(&new_client->dev, &dev_attr_fan4_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_pwm2);
+	device_create_file(&new_client->dev, &dev_attr_pwm3);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp3_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max);
+	device_create_file(&new_client->dev, &dev_attr_vrm);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit);
+
+	return 0;
+
+	/* Error out and cleanup code */
+    ERROR1:
+	kfree(data);
+    ERROR0:
+	return err;
+}
+
+int lm85_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+
+int lm85_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	/* What size location is it? */
+	switch( reg ) {
+	case LM85_REG_FAN(0) :  /* Read WORD data */
+	case LM85_REG_FAN(1) :
+	case LM85_REG_FAN(2) :
+	case LM85_REG_FAN(3) :
+	case LM85_REG_FAN_MIN(0) :
+	case LM85_REG_FAN_MIN(1) :
+	case LM85_REG_FAN_MIN(2) :
+	case LM85_REG_FAN_MIN(3) :
+	case LM85_REG_ALARM1 :	/* Read both bytes at once */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
+		res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
+		break ;
+	case ADT7463_REG_TMIN_CTL1 :  /* Read WORD MSB, LSB */
+		res = i2c_smbus_read_byte_data(client, reg) << 8 ;
+		res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ;
+		break ;
+	default:	/* Read BYTE data */
+		res = i2c_smbus_read_byte_data(client, reg);
+		break ;
+	}
+
+	return res ;
+}
+
+int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+{
+	int res ;
+
+	switch( reg ) {
+	case LM85_REG_FAN(0) :  /* Write WORD data */
+	case LM85_REG_FAN(1) :
+	case LM85_REG_FAN(2) :
+	case LM85_REG_FAN(3) :
+	case LM85_REG_FAN_MIN(0) :
+	case LM85_REG_FAN_MIN(1) :
+	case LM85_REG_FAN_MIN(2) :
+	case LM85_REG_FAN_MIN(3) :
+	/* NOTE: ALARM is read only, so not included here */
+		res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ;
+		res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ;
+		break ;
+	case ADT7463_REG_TMIN_CTL1 :  /* Write WORD MSB, LSB */
+		res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff);
+		res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ;
+		break ;
+	default:	/* Write BYTE data */
+		res = i2c_smbus_write_byte_data(client, reg, value);
+		break ;
+	}
+
+	return res ;
+}
+
+void lm85_init_client(struct i2c_client *client)
+{
+	int value;
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "Initializing device\n");
+
+	/* Warn if part was not "READY" */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value);
+	if( value & 0x02 ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+	if( ! (value & 0x04) ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+	if( value & 0x10
+	    && ( data->type == adm1027
+		|| data->type == adt7463 ) ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set.  "
+			"Please report this to the lm85 maintainer.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+
+	/* WE INTENTIONALLY make no changes to the limits,
+	 *   offsets, pwms, fans and zones.  If they were
+	 *   configured, we don't want to mess with them.
+	 *   If they weren't, the default is 100% PWM, no
+	 *   control and will suffice until 'sensors -s'
+	 *   can be run by the user.
+	 */
+
+	/* Start monitoring */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	/* Try to clear LOCK, Set START, save everything else */
+	value = (value & ~ 0x02) | 0x01 ;
+	dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
+	lm85_write_value(client, LM85_REG_CONFIG, value);
+}
+
+static struct lm85_data *lm85_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if ( !data->valid ||
+	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
+		/* Things that change quickly */
+		dev_dbg(&client->dev, "Reading sensor values\n");
+		
+		/* Have to read extended bits first to "freeze" the
+		 * more significant bits that are read later.
+		 */
+		if ( (data->type == adm1027) || (data->type == adt7463) ) {
+			int ext1 = lm85_read_value(client,
+						   ADM1027_REG_EXTEND_ADC1);
+			int ext2 =  lm85_read_value(client,
+						    ADM1027_REG_EXTEND_ADC2);
+			int val = (ext1 << 8) + ext2;
+
+			for(i = 0; i <= 4; i++)
+				data->in_ext[i] = (val>>(i * 2))&0x03;
+
+			for(i = 0; i <= 2; i++)
+				data->temp_ext[i] = (val>>((i + 5) * 2))&0x03;
+		}
+
+		/* adc_scale is 2^(number of LSBs). There are 4 extra bits in
+		   the emc6d102 and 2 in the adt7463 and adm1027. In all
+		   other chips ext is always 0 and the value of scale is
+		   irrelevant. So it is left in 4*/
+		data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
+
+		for (i = 0; i <= 4; ++i) {
+			data->in[i] =
+			    lm85_read_value(client, LM85_REG_IN(i));
+		}
+
+		for (i = 0; i <= 3; ++i) {
+			data->fan[i] =
+			    lm85_read_value(client, LM85_REG_FAN(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp[i] =
+			    lm85_read_value(client, LM85_REG_TEMP(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->pwm[i] =
+			    lm85_read_value(client, LM85_REG_PWM(i));
+		}
+
+		data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
+
+		if ( data->type == adt7463 ) {
+			if( data->therm_total < ULONG_MAX - 256 ) {
+			    data->therm_total +=
+				lm85_read_value(client, ADT7463_REG_THERM );
+			}
+		} else if ( data->type == emc6d100 ) {
+			/* Three more voltage sensors */
+			for (i = 5; i <= 7; ++i) {
+				data->in[i] =
+					lm85_read_value(client, EMC6D100_REG_IN(i));
+			}
+			/* More alarm bits */
+			data->alarms |=
+				lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
+		} else if (data->type == emc6d102 ) {
+			/* Have to read LSB bits after the MSB ones because
+			   the reading of the MSB bits has frozen the
+			   LSBs (backward from the ADM1027).
+			 */
+			int ext1 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC1);
+			int ext2 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC2);
+			int ext3 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC3);
+			int ext4 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC4);
+			data->in_ext[0] = ext3 & 0x0f;
+			data->in_ext[1] = ext4 & 0x0f;
+			data->in_ext[2] = (ext4 >> 4) & 0x0f;
+			data->in_ext[3] = (ext3 >> 4) & 0x0f;
+			data->in_ext[4] = (ext2 >> 4) & 0x0f;
+
+			data->temp_ext[0] = ext1 & 0x0f;
+			data->temp_ext[1] = ext2 & 0x0f;
+			data->temp_ext[2] = (ext1 >> 4) & 0x0f;
+		}
+
+		data->last_reading = jiffies ;
+	};  /* last_reading */
+
+	if ( !data->valid ||
+	     time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
+		/* Things that don't change often */
+		dev_dbg(&client->dev, "Reading config values\n");
+
+		for (i = 0; i <= 4; ++i) {
+			data->in_min[i] =
+			    lm85_read_value(client, LM85_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm85_read_value(client, LM85_REG_IN_MAX(i));
+		}
+
+		if ( data->type == emc6d100 ) {
+			for (i = 5; i <= 7; ++i) {
+				data->in_min[i] =
+					lm85_read_value(client, EMC6D100_REG_IN_MIN(i));
+				data->in_max[i] =
+					lm85_read_value(client, EMC6D100_REG_IN_MAX(i));
+			}
+		}
+
+		for (i = 0; i <= 3; ++i) {
+			data->fan_min[i] =
+			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp_min[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MIN(i));
+			data->temp_max[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MAX(i));
+		}
+
+		data->vid = lm85_read_value(client, LM85_REG_VID);
+
+		for (i = 0; i <= 2; ++i) {
+			int val ;
+			data->autofan[i].config =
+			    lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
+			val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
+			data->autofan[i].freq = val & 0x07 ;
+			data->zone[i].range = (val >> 4) & 0x0f ;
+			data->autofan[i].min_pwm =
+			    lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
+			data->zone[i].limit =
+			    lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
+			data->zone[i].critical =
+			    lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
+		}
+
+		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+		data->smooth[0] = i & 0x0f ;
+		data->syncpwm3 = i & 0x10 ;  /* Save PWM3 config */
+		data->autofan[0].min_off = (i & 0x20) != 0 ;
+		data->autofan[1].min_off = (i & 0x40) != 0 ;
+		data->autofan[2].min_off = (i & 0x80) != 0 ;
+		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
+		data->smooth[1] = (i>>4) & 0x0f ;
+		data->smooth[2] = i & 0x0f ;
+
+		i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
+		data->zone[0].hyst = (i>>4) & 0x0f ;
+		data->zone[1].hyst = i & 0x0f ;
+
+		i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
+		data->zone[2].hyst = (i>>4) & 0x0f ;
+
+		if ( (data->type == lm85b) || (data->type == lm85c) ) {
+			data->tach_mode = lm85_read_value(client,
+				LM85_REG_TACH_MODE );
+			data->spinup_ctl = lm85_read_value(client,
+				LM85_REG_SPINUP_CTL );
+		} else if ( (data->type == adt7463) || (data->type == adm1027) ) {
+			if ( data->type == adt7463 ) {
+				for (i = 0; i <= 2; ++i) {
+				    data->oppoint[i] = lm85_read_value(client,
+					ADT7463_REG_OPPOINT(i) );
+				}
+				data->tmin_ctl = lm85_read_value(client,
+					ADT7463_REG_TMIN_CTL1 );
+				data->therm_limit = lm85_read_value(client,
+					ADT7463_REG_THERM_LIMIT );
+			}
+			for (i = 0; i <= 2; ++i) {
+			    data->temp_offset[i] = lm85_read_value(client,
+				ADM1027_REG_TEMP_OFFSET(i) );
+			}
+			data->tach_mode = lm85_read_value(client,
+				ADM1027_REG_CONFIG3 );
+			data->fan_ppr = lm85_read_value(client,
+				ADM1027_REG_FAN_PPR );
+		}
+	
+		data->last_config = jiffies;
+	};  /* last_config */
+
+	data->valid = 1;
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+
+static int __init sm_lm85_init(void)
+{
+	return i2c_add_driver(&lm85_driver);
+}
+
+static void  __exit sm_lm85_exit(void)
+{
+	i2c_del_driver(&lm85_driver);
+}
+
+/* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
+ * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
+ *     post 2.7.0 CVS changes.
+ */
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com");
+MODULE_DESCRIPTION("LM85-B, LM85-C driver");
+
+module_init(sm_lm85_init);
+module_exit(sm_lm85_exit);
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
new file mode 100644
index 000000000000..1921ed1af182
--- /dev/null
+++ b/drivers/hwmon/lm87.c
@@ -0,0 +1,828 @@
+/*
+ * lm87.c
+ *
+ * Copyright (C) 2000       Frodo Looijaard <frodol@dds.nl>
+ *                          Philip Edelbrock <phil@netroedge.com>
+ *                          Stephen Rousset <stephen.rousset@rocketlogix.com>
+ *                          Dan Eaton <dan.eaton@rocketlogix.com>
+ * Copyright (C) 2004       Jean Delvare <khali@linux-fr.org>
+ *
+ * Original port to Linux 2.6 by Jeff Oliver.
+ *
+ * The LM87 is a sensor chip made by National Semiconductor. It monitors up
+ * to 8 voltages (including its own power source), up to three temperatures
+ * (its own plus up to two external ones) and up to two fans. The default
+ * configuration is 6 voltages, two temperatures and two fans (see below).
+ * Voltages are scaled internally with ratios such that the nominal value of
+ * each voltage correspond to a register value of 192 (which means a
+ * resolution of about 0.5% of the nominal value). Temperature values are
+ * reported with a 1 deg resolution and a 3-4 deg accuracy. Complete
+ * datasheet can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM87.html
+ *
+ * Some functions share pins, so not all functions are available at the same
+ * time. Which are depends on the hardware setup. This driver assumes that
+ * the BIOS configured the chip correctly. In that respect, it  differs from
+ * the original driver (from lm_sensors for Linux 2.4), which would force the
+ * LM87 to an arbitrary, compile-time chosen mode, regardless of the actual
+ * chipset wiring.
+ * For reference, here is the list of exclusive functions:
+ *  - in0+in5 (default) or temp3
+ *  - fan1 (default) or in6
+ *  - fan2 (default) or in7
+ *  - VID lines (default) or IRQ lines (not handled by this driver)
+ *
+ * The LM87 additionally features an analog output, supposedly usable to
+ * control the speed of a fan. All new chips use pulse width modulation
+ * instead. The LM87 is the only hardware monitoring chipset I know of
+ * which uses amplitude modulation. Be careful when using this feature.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/*
+ * Addresses to scan
+ * LM87 has three possible addresses: 0x2c, 0x2d and 0x2e.
+ */
+
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(lm87);
+
+/*
+ * The LM87 registers
+ */
+
+/* nr in 0..5 */
+#define LM87_REG_IN(nr)			(0x20 + (nr))
+#define LM87_REG_IN_MAX(nr)		(0x2B + (nr) * 2)
+#define LM87_REG_IN_MIN(nr)		(0x2C + (nr) * 2)
+/* nr in 0..1 */
+#define LM87_REG_AIN(nr)		(0x28 + (nr))
+#define LM87_REG_AIN_MIN(nr)		(0x1A + (nr))
+#define LM87_REG_AIN_MAX(nr)		(0x3B + (nr))
+
+static u8 LM87_REG_TEMP[3] = { 0x27, 0x26, 0x20 };
+static u8 LM87_REG_TEMP_HIGH[3] = { 0x39, 0x37, 0x2B };
+static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C };
+
+#define LM87_REG_TEMP_HW_INT_LOCK	0x13
+#define LM87_REG_TEMP_HW_EXT_LOCK	0x14
+#define LM87_REG_TEMP_HW_INT		0x17
+#define LM87_REG_TEMP_HW_EXT		0x18
+
+/* nr in 0..1 */
+#define LM87_REG_FAN(nr)		(0x28 + (nr))
+#define LM87_REG_FAN_MIN(nr)		(0x3B + (nr))
+#define LM87_REG_AOUT			0x19
+
+#define LM87_REG_CONFIG			0x40
+#define LM87_REG_CHANNEL_MODE		0x16
+#define LM87_REG_VID_FAN_DIV		0x47
+#define LM87_REG_VID4			0x49
+
+#define LM87_REG_ALARMS1		0x41
+#define LM87_REG_ALARMS2		0x42
+
+#define LM87_REG_COMPANY_ID		0x3E
+#define LM87_REG_REVISION		0x3F
+
+/*
+ * Conversions and various macros
+ * The LM87 uses signed 8-bit values for temperatures.
+ */
+
+#define IN_FROM_REG(reg,scale)	(((reg) * (scale) + 96) / 192)
+#define IN_TO_REG(val,scale)	((val) <= 0 ? 0 : \
+				 (val) * 192 >= (scale) * 255 ? 255 : \
+				 ((val) * 192 + (scale)/2) / (scale))
+
+#define TEMP_FROM_REG(reg)	((reg) * 1000)
+#define TEMP_TO_REG(val)	((val) <= -127500 ? -128 : \
+				 (val) >= 126500 ? 127 : \
+				 (((val) < 0 ? (val)-500 : (val)+500) / 1000))
+
+#define FAN_FROM_REG(reg,div)	((reg) == 255 || (reg) == 0 ? 0 : \
+				 1350000 + (reg)*(div) / 2) / ((reg)*(div))
+#define FAN_TO_REG(val,div)	((val)*(div) * 255 <= 1350000 ? 255 : \
+				 (1350000 + (val)*(div) / 2) / ((val)*(div)))
+
+#define FAN_DIV_FROM_REG(reg)	(1 << (reg))
+
+/* analog out is 9.80mV/LSB */
+#define AOUT_FROM_REG(reg)	(((reg) * 98 + 5) / 10)
+#define AOUT_TO_REG(val)	((val) <= 0 ? 0 : \
+				 (val) >= 2500 ? 255 : \
+				 ((val) * 10 + 49) / 98)
+
+/* nr in 0..1 */
+#define CHAN_NO_FAN(nr)		(1 << (nr))
+#define CHAN_TEMP3		(1 << 2)
+#define CHAN_VCC_5V		(1 << 3)
+#define CHAN_NO_VID		(1 << 8)
+
+/*
+ * Functions declaration
+ */
+
+static int lm87_attach_adapter(struct i2c_adapter *adapter);
+static int lm87_detect(struct i2c_adapter *adapter, int address, int kind);
+static void lm87_init_client(struct i2c_client *client);
+static int lm87_detach_client(struct i2c_client *client);
+static struct lm87_data *lm87_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm87_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm87",
+	.id		= I2C_DRIVERID_LM87,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm87_attach_adapter,
+	.detach_client	= lm87_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm87_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* In jiffies */
+
+	u8 channel;		/* register value */
+
+	u8 in[8];		/* register value */
+	u8 in_max[8];		/* register value */
+	u8 in_min[8];		/* register value */
+	u16 in_scale[8];
+
+	s8 temp[3];		/* register value */
+	s8 temp_high[3];	/* register value */
+	s8 temp_low[3];		/* register value */
+	s8 temp_crit_int;	/* min of two register values */
+	s8 temp_crit_ext;	/* min of two register values */
+
+	u8 fan[2];		/* register value */
+	u8 fan_min[2];		/* register value */
+	u8 fan_div[2];		/* register value, shifted right */
+	u8 aout;		/* register value */
+
+	u16 alarms;		/* register values, combined */
+	u8 vid;			/* register values, combined */
+	u8 vrm;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static inline int lm87_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int lm87_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+#define show_in(offset) \
+static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
+		       data->in_scale[offset])); \
+} \
+static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
+		       data->in_scale[offset])); \
+} \
+static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
+		       data->in_scale[offset])); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+		show_in##offset##_input, NULL);
+show_in(0);
+show_in(1);
+show_in(2);
+show_in(3);
+show_in(4);
+show_in(5);
+show_in(6);
+show_in(7);
+
+static void set_in_min(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]);
+	lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) :
+			 LM87_REG_AIN_MIN(nr-6), data->in_min[nr]);
+	up(&data->update_lock);
+}
+
+static void set_in_max(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]);
+	lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) :
+			 LM87_REG_AIN_MAX(nr-6), data->in_max[nr]);
+	up(&data->update_lock);
+}
+
+#define set_in(offset) \
+static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	set_in_min(dev, buf, offset); \
+	return count; \
+} \
+static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	set_in_max(dev, buf, offset); \
+	return count; \
+} \
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+		show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+		show_in##offset##_max, set_in##offset##_max);
+set_in(0);
+set_in(1);
+set_in(2);
+set_in(3);
+set_in(4);
+set_in(5);
+set_in(6);
+set_in(7);
+
+#define show_temp(offset) \
+static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
+} \
+static ssize_t show_temp##offset##_low(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[offset-1])); \
+} \
+static ssize_t show_temp##offset##_high(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[offset-1])); \
+}\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+		show_temp##offset##_input, NULL);
+show_temp(1);
+show_temp(2);
+show_temp(3);
+
+static void set_temp_low(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_low[nr] = TEMP_TO_REG(val);
+	lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]);
+	up(&data->update_lock);
+}
+
+static void set_temp_high(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_high[nr] = TEMP_TO_REG(val);
+	lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]);
+	up(&data->update_lock);
+}
+
+#define set_temp(offset) \
+static ssize_t set_temp##offset##_low(struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	set_temp_low(dev, buf, offset-1); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_high(struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	set_temp_high(dev, buf, offset-1); \
+	return count; \
+} \
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+		show_temp##offset##_high, set_temp##offset##_high); \
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
+		show_temp##offset##_low, set_temp##offset##_low);
+set_temp(1);
+set_temp(2);
+set_temp(3);
+
+static ssize_t show_temp_crit_int(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_int));
+}
+
+static ssize_t show_temp_crit_ext(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_ext));
+}
+
+static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit_int, NULL);
+static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit_ext, NULL);
+static DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit_ext, NULL);
+
+#define show_fan(offset) \
+static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[offset-1], \
+		       FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \
+} \
+static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[offset-1], \
+		       FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \
+} \
+static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm87_data *data = lm87_update_device(dev); \
+	return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[offset-1])); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+		show_fan##offset##_input, NULL);
+show_fan(1);
+show_fan(2);
+
+static void set_fan_min(struct device *dev, const char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val,
+			    FAN_DIV_FROM_REG(data->fan_div[nr]));
+	lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan clock divider.  This follows the principle
+   of least suprise; the user doesn't expect the fan minimum to change just
+   because the divider changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	unsigned long min;
+	u8 reg;
+
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   FAN_DIV_FROM_REG(data->fan_div[nr]));
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	reg = lm87_read_value(client, LM87_REG_VID_FAN_DIV);
+	switch (nr) {
+	case 0:
+	    reg = (reg & 0xCF) | (data->fan_div[0] << 4);
+	    break;
+	case 1:
+	    reg = (reg & 0x3F) | (data->fan_div[1] << 6);
+	    break;
+	}
+	lm87_write_value(client, LM87_REG_VID_FAN_DIV, reg);
+
+	data->fan_min[nr] = FAN_TO_REG(min, val);
+	lm87_write_value(client, LM87_REG_FAN_MIN(nr),
+			 data->fan_min[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define set_fan(offset) \
+static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+		size_t count) \
+{ \
+	set_fan_min(dev, buf, offset-1); \
+	return count; \
+} \
+static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \
+		size_t count) \
+{ \
+	return set_fan_div(dev, buf, count, offset-1); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_min, set_fan##offset##_min); \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_div, set_fan##offset##_div);
+set_fan(1);
+set_fan(2);
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", data->vrm);
+}
+static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	data->vrm = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+
+static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm87_data *data = lm87_update_device(dev);
+	return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout));
+}
+static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->aout = AOUT_TO_REG(val);
+	lm87_write_value(client, LM87_REG_AOUT, data->aout);
+	up(&data->update_lock);
+	return count;
+}
+static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
+
+/*
+ * Real code
+ */
+
+static int lm87_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm87_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm87_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm87_data));
+
+	/* The common I2C client data is placed right before the
+	   LM87-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm87_driver;
+	new_client->flags = 0;
+
+	/* Default to an LM87 if forced */
+	if (kind == 0)
+		kind = lm87;
+
+	/* Now, we do the remaining detection. */
+	if (kind < 0) {
+		u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
+
+		if (rev < 0x01 || rev > 0x08
+		 || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
+		 || lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) {
+			dev_dbg(&adapter->dev,
+				"LM87 detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM87 chip */
+	lm87_init_client(new_client);
+
+	data->in_scale[0] = 2500;
+	data->in_scale[1] = 2700;
+	data->in_scale[2] = (data->channel & CHAN_VCC_5V) ? 5000 : 3300;
+	data->in_scale[3] = 5000;
+	data->in_scale[4] = 12000;
+	data->in_scale[5] = 2700;
+	data->in_scale[6] = 1875;
+	data->in_scale[7] = 1875;
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+
+	if (data->channel & CHAN_NO_FAN(0)) {
+		device_create_file(&new_client->dev, &dev_attr_in6_input);
+		device_create_file(&new_client->dev, &dev_attr_in6_min);
+		device_create_file(&new_client->dev, &dev_attr_in6_max);
+	} else {
+		device_create_file(&new_client->dev, &dev_attr_fan1_input);
+		device_create_file(&new_client->dev, &dev_attr_fan1_min);
+		device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	}
+	if (data->channel & CHAN_NO_FAN(1)) {
+		device_create_file(&new_client->dev, &dev_attr_in7_input);
+		device_create_file(&new_client->dev, &dev_attr_in7_min);
+		device_create_file(&new_client->dev, &dev_attr_in7_max);
+	} else {
+		device_create_file(&new_client->dev, &dev_attr_fan2_input);
+		device_create_file(&new_client->dev, &dev_attr_fan2_min);
+		device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	}
+
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+
+	if (data->channel & CHAN_TEMP3) {
+		device_create_file(&new_client->dev, &dev_attr_temp3_input);
+		device_create_file(&new_client->dev, &dev_attr_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+	} else {
+		device_create_file(&new_client->dev, &dev_attr_in0_input);
+		device_create_file(&new_client->dev, &dev_attr_in0_min);
+		device_create_file(&new_client->dev, &dev_attr_in0_max);
+		device_create_file(&new_client->dev, &dev_attr_in5_input);
+		device_create_file(&new_client->dev, &dev_attr_in5_min);
+		device_create_file(&new_client->dev, &dev_attr_in5_max);
+	}
+
+	if (!(data->channel & CHAN_NO_VID)) {
+		device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+		device_create_file(&new_client->dev, &dev_attr_vrm);
+	}
+
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_aout_output);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void lm87_init_client(struct i2c_client *client)
+{
+	struct lm87_data *data = i2c_get_clientdata(client);
+	u8 config;
+
+	data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
+	data->vrm = i2c_which_vrm();
+
+	config = lm87_read_value(client, LM87_REG_CONFIG);
+	if (!(config & 0x01)) {
+		int i;
+
+		/* Limits are left uninitialized after power-up */
+		for (i = 1; i < 6; i++) {
+			lm87_write_value(client, LM87_REG_IN_MIN(i), 0x00);
+			lm87_write_value(client, LM87_REG_IN_MAX(i), 0xFF);
+		}
+		for (i = 0; i < 2; i++) {
+			lm87_write_value(client, LM87_REG_TEMP_HIGH[i], 0x7F);
+			lm87_write_value(client, LM87_REG_TEMP_LOW[i], 0x00);
+			lm87_write_value(client, LM87_REG_AIN_MIN(i), 0x00);
+			lm87_write_value(client, LM87_REG_AIN_MAX(i), 0xFF);
+		}
+		if (data->channel & CHAN_TEMP3) {
+			lm87_write_value(client, LM87_REG_TEMP_HIGH[2], 0x7F);
+			lm87_write_value(client, LM87_REG_TEMP_LOW[2], 0x00);
+		} else {
+			lm87_write_value(client, LM87_REG_IN_MIN(0), 0x00);
+			lm87_write_value(client, LM87_REG_IN_MAX(0), 0xFF);
+		}
+	}
+	if ((config & 0x81) != 0x01) {
+		/* Start monitoring */
+		lm87_write_value(client, LM87_REG_CONFIG,
+				 (config & 0xF7) | 0x01);
+	}
+}
+
+static int lm87_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm87_data *lm87_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm87_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		int i, j;
+
+		dev_dbg(&client->dev, "Updating data.\n");
+
+		i = (data->channel & CHAN_TEMP3) ? 1 : 0;
+		j = (data->channel & CHAN_TEMP3) ? 5 : 6;
+		for (; i < j; i++) {
+			data->in[i] = lm87_read_value(client,
+				      LM87_REG_IN(i));
+			data->in_min[i] = lm87_read_value(client,
+					  LM87_REG_IN_MIN(i));
+			data->in_max[i] = lm87_read_value(client,
+					  LM87_REG_IN_MAX(i));
+		}
+
+		for (i = 0; i < 2; i++) {
+			if (data->channel & CHAN_NO_FAN(i)) {
+				data->in[6+i] = lm87_read_value(client,
+						LM87_REG_AIN(i));
+				data->in_max[6+i] = lm87_read_value(client,
+						    LM87_REG_AIN_MAX(i));
+				data->in_min[6+i] = lm87_read_value(client,
+						    LM87_REG_AIN_MIN(i));
+
+			} else {
+				data->fan[i] = lm87_read_value(client,
+					       LM87_REG_FAN(i));
+				data->fan_min[i] = lm87_read_value(client,
+						   LM87_REG_FAN_MIN(i));
+			}
+		}
+
+		j = (data->channel & CHAN_TEMP3) ? 3 : 2;
+		for (i = 0 ; i < j; i++) {
+			data->temp[i] = lm87_read_value(client,
+					LM87_REG_TEMP[i]);
+			data->temp_high[i] = lm87_read_value(client,
+					     LM87_REG_TEMP_HIGH[i]);
+			data->temp_low[i] = lm87_read_value(client,
+					    LM87_REG_TEMP_LOW[i]);
+		}
+
+		i = lm87_read_value(client, LM87_REG_TEMP_HW_INT_LOCK);
+		j = lm87_read_value(client, LM87_REG_TEMP_HW_INT);
+		data->temp_crit_int = min(i, j);
+
+		i = lm87_read_value(client, LM87_REG_TEMP_HW_EXT_LOCK);
+		j = lm87_read_value(client, LM87_REG_TEMP_HW_EXT);
+		data->temp_crit_ext = min(i, j);
+
+		i = lm87_read_value(client, LM87_REG_VID_FAN_DIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		data->vid = (i & 0x0F)
+			  | (lm87_read_value(client, LM87_REG_VID4) & 0x01)
+			     << 4;
+
+		data->alarms = lm87_read_value(client, LM87_REG_ALARMS1)
+			     | (lm87_read_value(client, LM87_REG_ALARMS2)
+				<< 8);
+		data->aout = lm87_read_value(client, LM87_REG_AOUT);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm87_init(void)
+{
+	return i2c_add_driver(&lm87_driver);
+}
+
+static void __exit sensors_lm87_exit(void)
+{
+	i2c_del_driver(&lm87_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org> and others");
+MODULE_DESCRIPTION("LM87 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm87_init);
+module_exit(sensors_lm87_exit);
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
new file mode 100644
index 000000000000..a67dcadf7cb0
--- /dev/null
+++ b/drivers/hwmon/lm90.c
@@ -0,0 +1,655 @@
+/*
+ * lm90.c - Part of lm_sensors, Linux kernel modules for hardware
+ *          monitoring
+ * Copyright (C) 2003-2005  Jean Delvare <khali@linux-fr.org>
+ *
+ * Based on the lm83 driver. The LM90 is a sensor chip made by National
+ * Semiconductor. It reports up to two temperatures (its own plus up to
+ * one external one) with a 0.125 deg resolution (1 deg for local
+ * temperature) and a 3-4 deg accuracy. Complete datasheet can be
+ * obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM90.html
+ *
+ * This driver also supports the LM89 and LM99, two other sensor chips
+ * made by National Semiconductor. Both have an increased remote
+ * temperature measurement accuracy (1 degree), and the LM99
+ * additionally shifts remote temperatures (measured and limits) by 16
+ * degrees, which allows for higher temperatures measurement. The
+ * driver doesn't handle it since it can be done easily in user-space.
+ * Complete datasheets can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM89.html
+ *   http://www.national.com/pf/LM/LM99.html
+ * Note that there is no way to differentiate between both chips.
+ *
+ * This driver also supports the LM86, another sensor chip made by
+ * National Semiconductor. It is exactly similar to the LM90 except it
+ * has a higher accuracy.
+ * Complete datasheet can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM86.html
+ *
+ * This driver also supports the ADM1032, a sensor chip made by Analog
+ * Devices. That chip is similar to the LM90, with a few differences
+ * that are not handled by this driver. Complete datasheet can be
+ * obtained from Analog's website at:
+ *   http://products.analog.com/products/info.asp?product=ADM1032
+ * Among others, it has a higher accuracy than the LM90, much like the
+ * LM86 does.
+ *
+ * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor
+ * chips made by Maxim. These chips are similar to the LM86. Complete
+ * datasheet can be obtained at Maxim's website at:
+ *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+ * Note that there is no easy way to differentiate between the three
+ * variants. The extra address and features of the MAX6659 are not
+ * supported by this driver.
+ *
+ * This driver also supports the ADT7461 chip from Analog Devices but
+ * only in its "compatability mode". If an ADT7461 chip is found but
+ * is configured in non-compatible mode (where its temperature
+ * register values are decoded differently) it is ignored by this
+ * driver. Complete datasheet can be obtained from Analog's website
+ * at:
+ *   http://products.analog.com/products/info.asp?product=ADT7461
+ *
+ * Since the LM90 was the first chipset supported by this driver, most
+ * comments will refer to this chipset, but are actually general and
+ * concern all supported chipsets, unless mentioned otherwise.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * Addresses to scan
+ * Address is fully defined internally and cannot be changed except for
+ * MAX6659.
+ * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c.
+ * LM89-1, and LM99-1 have address 0x4d.
+ * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
+ * ADT7461 always has address 0x4c.
+ */
+
+static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
+
+/*
+ * The LM90 registers
+ */
+
+#define LM90_REG_R_MAN_ID		0xFE
+#define LM90_REG_R_CHIP_ID		0xFF
+#define LM90_REG_R_CONFIG1		0x03
+#define LM90_REG_W_CONFIG1		0x09
+#define LM90_REG_R_CONFIG2		0xBF
+#define LM90_REG_W_CONFIG2		0xBF
+#define LM90_REG_R_CONVRATE		0x04
+#define LM90_REG_W_CONVRATE		0x0A
+#define LM90_REG_R_STATUS		0x02
+#define LM90_REG_R_LOCAL_TEMP		0x00
+#define LM90_REG_R_LOCAL_HIGH		0x05
+#define LM90_REG_W_LOCAL_HIGH		0x0B
+#define LM90_REG_R_LOCAL_LOW		0x06
+#define LM90_REG_W_LOCAL_LOW		0x0C
+#define LM90_REG_R_LOCAL_CRIT		0x20
+#define LM90_REG_W_LOCAL_CRIT		0x20
+#define LM90_REG_R_REMOTE_TEMPH		0x01
+#define LM90_REG_R_REMOTE_TEMPL		0x10
+#define LM90_REG_R_REMOTE_OFFSH		0x11
+#define LM90_REG_W_REMOTE_OFFSH		0x11
+#define LM90_REG_R_REMOTE_OFFSL		0x12
+#define LM90_REG_W_REMOTE_OFFSL		0x12
+#define LM90_REG_R_REMOTE_HIGHH		0x07
+#define LM90_REG_W_REMOTE_HIGHH		0x0D
+#define LM90_REG_R_REMOTE_HIGHL		0x13
+#define LM90_REG_W_REMOTE_HIGHL		0x13
+#define LM90_REG_R_REMOTE_LOWH		0x08
+#define LM90_REG_W_REMOTE_LOWH		0x0E
+#define LM90_REG_R_REMOTE_LOWL		0x14
+#define LM90_REG_W_REMOTE_LOWL		0x14
+#define LM90_REG_R_REMOTE_CRIT		0x19
+#define LM90_REG_W_REMOTE_CRIT		0x19
+#define LM90_REG_R_TCRIT_HYST		0x21
+#define LM90_REG_W_TCRIT_HYST		0x21
+
+/*
+ * Conversions and various macros
+ * For local temperatures and limits, critical limits and the hysteresis
+ * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius.
+ * For remote temperatures and limits, it uses signed 11-bit values with
+ * LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
+ */
+
+#define TEMP1_FROM_REG(val)	((val) * 1000)
+#define TEMP1_TO_REG(val)	((val) <= -128000 ? -128 : \
+				 (val) >= 127000 ? 127 : \
+				 (val) < 0 ? ((val) - 500) / 1000 : \
+				 ((val) + 500) / 1000)
+#define TEMP2_FROM_REG(val)	((val) / 32 * 125)
+#define TEMP2_TO_REG(val)	((val) <= -128000 ? 0x8000 : \
+				 (val) >= 127875 ? 0x7FE0 : \
+				 (val) < 0 ? ((val) - 62) / 125 * 32 : \
+				 ((val) + 62) / 125 * 32)
+#define HYST_TO_REG(val)	((val) <= 0 ? 0 : (val) >= 30500 ? 31 : \
+				 ((val) + 500) / 1000)
+
+/* 
+ * ADT7461 is almost identical to LM90 except that attempts to write
+ * values that are outside the range 0 < temp < 127 are treated as
+ * the boundary value. 
+ */
+
+#define TEMP1_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
+				 (val) >= 127000 ? 127 : \
+				 ((val) + 500) / 1000)
+#define TEMP2_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
+				 (val) >= 127750 ? 0x7FC0 : \
+				 ((val) + 125) / 250 * 64)
+
+/*
+ * Functions declaration
+ */
+
+static int lm90_attach_adapter(struct i2c_adapter *adapter);
+static int lm90_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static void lm90_init_client(struct i2c_client *client);
+static int lm90_detach_client(struct i2c_client *client);
+static struct lm90_data *lm90_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver lm90_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm90",
+	.id		= I2C_DRIVERID_LM90,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm90_attach_adapter,
+	.detach_client	= lm90_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm90_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+	int kind;
+
+	/* registers values */
+	s8 temp8[5];	/* 0: local input
+			   1: local low limit
+			   2: local high limit
+			   3: local critical limit
+			   4: remote critical limit */
+	s16 temp11[3];	/* 0: remote input
+			   1: remote low limit
+			   2: remote high limit */
+	u8 temp_hyst;
+	u8 alarms; /* bitvector */
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index]));
+}
+
+static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
+			 const char *buf, size_t count)
+{
+	static const u8 reg[4] = {
+		LM90_REG_W_LOCAL_LOW,
+		LM90_REG_W_LOCAL_HIGH,
+		LM90_REG_W_LOCAL_CRIT,
+		LM90_REG_W_REMOTE_CRIT,
+	};
+
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int nr = attr->index;
+
+	down(&data->update_lock);
+	if (data->kind == adt7461)
+		data->temp8[nr] = TEMP1_TO_REG_ADT7461(val);
+	else
+		data->temp8[nr] = TEMP1_TO_REG(val);
+	i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
+			   char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP2_FROM_REG(data->temp11[attr->index]));
+}
+
+static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
+			  const char *buf, size_t count)
+{
+	static const u8 reg[4] = {
+		LM90_REG_W_REMOTE_LOWH,
+		LM90_REG_W_REMOTE_LOWL,
+		LM90_REG_W_REMOTE_HIGHH,
+		LM90_REG_W_REMOTE_HIGHL,
+	};
+
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int nr = attr->index;
+
+	down(&data->update_lock);
+	if (data->kind == adt7461)
+		data->temp11[nr] = TEMP2_TO_REG_ADT7461(val);
+	else
+		data->temp11[nr] = TEMP2_TO_REG(val);
+	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
+				  data->temp11[nr] >> 8);
+	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
+				  data->temp11[nr] & 0xff);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temphyst(struct device *dev, struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index])
+		       - TEMP1_FROM_REG(data->temp_hyst));
+}
+
+static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
+			    const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	long hyst;
+
+	down(&data->update_lock);
+	hyst = TEMP1_FROM_REG(data->temp8[3]) - val;
+	i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
+				  HYST_TO_REG(hyst));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy,
+			   char *buf)
+{
+	struct lm90_data *data = lm90_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 1);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 2);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
+	set_temp11, 2);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 3);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
+	set_temp8, 4);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
+	set_temphyst, 3);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm90_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm90_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm90_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm90_data));
+
+	/* The common I2C client data is placed right before the
+	   LM90-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm90_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+
+	/* Default to an LM90 if forced */
+	if (kind == 0)
+		kind = lm90;
+
+	if (kind < 0) { /* detection and identification */
+		u8 man_id, chip_id, reg_config1, reg_convrate;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 LM90_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  LM90_REG_R_CHIP_ID);
+		reg_config1 = i2c_smbus_read_byte_data(new_client,
+			      LM90_REG_R_CONFIG1);
+		reg_convrate = i2c_smbus_read_byte_data(new_client,
+			       LM90_REG_R_CONVRATE);
+		
+		if (man_id == 0x01) { /* National Semiconductor */
+			u8 reg_config2;
+
+			reg_config2 = i2c_smbus_read_byte_data(new_client,
+				      LM90_REG_R_CONFIG2);
+
+			if ((reg_config1 & 0x2A) == 0x00
+			 && (reg_config2 & 0xF8) == 0x00
+			 && reg_convrate <= 0x09) {
+				if (address == 0x4C
+				 && (chip_id & 0xF0) == 0x20) { /* LM90 */
+					kind = lm90;
+				} else
+				if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
+					kind = lm99;
+				} else
+				if (address == 0x4C
+				 && (chip_id & 0xF0) == 0x10) { /* LM86 */
+					kind = lm86;
+				}
+			}
+		} else
+		if (man_id == 0x41) { /* Analog Devices */
+			if (address == 0x4C
+			 && (chip_id & 0xF0) == 0x40 /* ADM1032 */
+			 && (reg_config1 & 0x3F) == 0x00
+			 && reg_convrate <= 0x0A) {
+				kind = adm1032;
+			} else
+			if (address == 0x4c
+			 && chip_id == 0x51 /* ADT7461 */
+			 && (reg_config1 & 0x1F) == 0x00 /* check compat mode */
+			 && reg_convrate <= 0x0A) {
+				kind = adt7461;
+			}
+		} else
+		if (man_id == 0x4D) { /* Maxim */
+			/*
+			 * The Maxim variants do NOT have a chip_id register.
+			 * Reading from that address will return the last read
+			 * value, which in our case is those of the man_id
+			 * register. Likewise, the config1 register seems to
+			 * lack a low nibble, so the value will be those of the
+			 * previous read, so in our case those of the man_id
+			 * register.
+			 */
+			if (chip_id == man_id
+			 && (reg_config1 & 0x1F) == (man_id & 0x0F)
+			 && reg_convrate <= 0x09) {
+			 	kind = max6657;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	if (kind == lm90) {
+		name = "lm90";
+	} else if (kind == adm1032) {
+		name = "adm1032";
+	} else if (kind == lm99) {
+		name = "lm99";
+	} else if (kind == lm86) {
+		name = "lm86";
+	} else if (kind == max6657) {
+		name = "max6657";
+	} else if (kind == adt7461) {
+		name = "adt7461";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	data->kind = kind;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM90 chip */
+	lm90_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_input.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_min.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_min.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_max.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_crit.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_crit.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+	device_create_file(&new_client->dev,
+			   &sensor_dev_attr_temp2_crit_hyst.dev_attr);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void lm90_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/*
+	 * Start the conversions.
+	 */
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
+				  5); /* 2 Hz */
+	config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
+	if (config & 0x40)
+		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+					  config & 0xBF); /* run */
+}
+
+static int lm90_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct lm90_data *lm90_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm90_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		u8 oldh, newh;
+
+		dev_dbg(&client->dev, "Updating lm90 data.\n");
+		data->temp8[0] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_LOCAL_TEMP);
+		data->temp8[1] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_LOCAL_LOW);
+		data->temp8[2] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_LOCAL_HIGH);
+		data->temp8[3] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_LOCAL_CRIT);
+		data->temp8[4] = i2c_smbus_read_byte_data(client,
+				 LM90_REG_R_REMOTE_CRIT);
+		data->temp_hyst = i2c_smbus_read_byte_data(client,
+				  LM90_REG_R_TCRIT_HYST);
+
+		/*
+		 * There is a trick here. We have to read two registers to
+		 * have the remote sensor temperature, but we have to beware
+		 * a conversion could occur inbetween the readings. The
+		 * datasheet says we should either use the one-shot
+		 * conversion register, which we don't want to do (disables
+		 * hardware monitoring) or monitor the busy bit, which is
+		 * impossible (we can't read the values and monitor that bit
+		 * at the exact same time). So the solution used here is to
+		 * read the high byte once, then the low byte, then the high
+		 * byte again. If the new high byte matches the old one,
+		 * then we have a valid reading. Else we have to read the low
+		 * byte again, and now we believe we have a correct reading.
+		 */
+		oldh = i2c_smbus_read_byte_data(client,
+		       LM90_REG_R_REMOTE_TEMPH);
+		data->temp11[0] = i2c_smbus_read_byte_data(client,
+				  LM90_REG_R_REMOTE_TEMPL);
+		newh = i2c_smbus_read_byte_data(client,
+		       LM90_REG_R_REMOTE_TEMPH);
+		if (newh != oldh) {
+			data->temp11[0] = i2c_smbus_read_byte_data(client,
+					  LM90_REG_R_REMOTE_TEMPL);
+#ifdef DEBUG
+			oldh = i2c_smbus_read_byte_data(client,
+			       LM90_REG_R_REMOTE_TEMPH);
+			/* oldh is actually newer */
+			if (newh != oldh)
+				dev_warn(&client->dev, "Remote temperature may be "
+					 "wrong.\n");
+#endif
+		}
+		data->temp11[0] |= (newh << 8);
+
+		data->temp11[1] = (i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_LOWH) << 8) +
+				   i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_LOWL);
+		data->temp11[2] = (i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_HIGHH) << 8) +
+				   i2c_smbus_read_byte_data(client,
+				   LM90_REG_R_REMOTE_HIGHL);
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       LM90_REG_R_STATUS);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_lm90_init(void)
+{
+	return i2c_add_driver(&lm90_driver);
+}
+
+static void __exit sensors_lm90_exit(void)
+{
+	i2c_del_driver(&lm90_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM90/ADM1032 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm90_init);
+module_exit(sensors_lm90_exit);
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
new file mode 100644
index 000000000000..215c8e40ffdd
--- /dev/null
+++ b/drivers/hwmon/lm92.c
@@ -0,0 +1,429 @@
+/*
+ * lm92 - Hardware monitoring driver
+ * Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
+ *
+ * Based on the lm90 driver, with some ideas taken from the lm_sensors
+ * lm92 driver as well.
+ *
+ * The LM92 is a sensor chip made by National Semiconductor. It reports
+ * its own temperature with a 0.0625 deg resolution and a 0.33 deg
+ * accuracy. Complete datasheet can be obtained from National's website
+ * at:
+ *   http://www.national.com/pf/LM/LM92.html
+ *
+ * This driver also supports the MAX6635 sensor chip made by Maxim.
+ * This chip is compatible with the LM92, but has a lesser accuracy
+ * (1.0 deg). Complete datasheet can be obtained from Maxim's website
+ * at:
+ *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
+ *
+ * Since the LM92 was the first chipset supported by this driver, most
+ * comments will refer to this chipset, but are actually general and
+ * concern all supported chipsets, unless mentioned otherwise.
+ *
+ * Support could easily be added for the National Semiconductor LM76
+ * and Maxim MAX6633 and MAX6634 chips, which are mostly compatible
+ * with the LM92.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+/* The LM92 and MAX6635 have 2 two-state pins for address selection,
+   resulting in 4 possible addresses. */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
+				       I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(lm92);
+
+/* The LM92 registers */
+#define LM92_REG_CONFIG			0x01 /* 8-bit, RW */
+#define LM92_REG_TEMP			0x00 /* 16-bit, RO */
+#define LM92_REG_TEMP_HYST		0x02 /* 16-bit, RW */
+#define LM92_REG_TEMP_CRIT		0x03 /* 16-bit, RW */
+#define LM92_REG_TEMP_LOW		0x04 /* 16-bit, RW */
+#define LM92_REG_TEMP_HIGH		0x05 /* 16-bit, RW */
+#define LM92_REG_MAN_ID			0x07 /* 16-bit, RO, LM92 only */
+
+/* The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius,
+   left-justified in 16-bit registers. No rounding is done, with such
+   a resolution it's just not worth it. Note that the MAX6635 doesn't
+   make use of the 4 lower bits for limits (i.e. effective resolution
+   for limits is 1 degree Celsius). */
+static inline int TEMP_FROM_REG(s16 reg)
+{
+	return reg / 8 * 625 / 10;
+}
+
+static inline s16 TEMP_TO_REG(int val)
+{
+	if (val <= -60000)
+		return -60000 * 10 / 625 * 8;
+	if (val >= 160000)
+		return 160000 * 10 / 625 * 8;
+	return val * 10 / 625 * 8;
+}
+
+/* Alarm flags are stored in the 3 LSB of the temperature register */
+static inline u8 ALARMS_FROM_REG(s16 reg)
+{
+	return reg & 0x0007;
+}
+
+/* Driver data (common to all clients) */
+static struct i2c_driver lm92_driver;
+
+/* Client data (each client gets its own) */
+struct lm92_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	s16 temp1_input, temp1_crit, temp1_min, temp1_max, temp1_hyst;
+};
+
+
+/*
+ * Sysfs attributes and callback functions
+ */
+
+static struct lm92_data *lm92_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm92_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ)
+	 || !data->valid) {
+		dev_dbg(&client->dev, "Updating lm92 data\n");
+		data->temp1_input = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP));
+		data->temp1_hyst = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP_HYST));
+		data->temp1_crit = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP_CRIT));
+		data->temp1_min = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP_LOW));
+		data->temp1_max = swab16(i2c_smbus_read_word_data(client,
+				    LM92_REG_TEMP_HIGH));
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+#define show_temp(value) \
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct lm92_data *data = lm92_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+}
+show_temp(temp1_input);
+show_temp(temp1_crit);
+show_temp(temp1_min);
+show_temp(temp1_max);
+
+#define set_temp(value, reg) \
+static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm92_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP_TO_REG(val); \
+	i2c_smbus_write_word_data(client, reg, swab16(data->value)); \
+	up(&data->update_lock); \
+	return count; \
+}
+set_temp(temp1_crit, LM92_REG_TEMP_CRIT);
+set_temp(temp1_min, LM92_REG_TEMP_LOW);
+set_temp(temp1_max, LM92_REG_TEMP_HIGH);
+
+static ssize_t show_temp1_crit_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_crit)
+		       - TEMP_FROM_REG(data->temp1_hyst));
+}
+static ssize_t show_temp1_max_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_max)
+		       - TEMP_FROM_REG(data->temp1_hyst));
+}
+static ssize_t show_temp1_min_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_min)
+		       + TEMP_FROM_REG(data->temp1_hyst));
+}
+
+static ssize_t set_temp1_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf,
+	size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm92_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val;
+	i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST,
+				  swab16(TEMP_TO_REG(data->temp1_hyst)));
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp1_input));
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL);
+static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp1_crit,
+	set_temp1_crit);
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp1_crit_hyst,
+	set_temp1_crit_hyst);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp1_min,
+	set_temp1_min);
+static DEVICE_ATTR(temp1_min_hyst, S_IRUGO, show_temp1_min_hyst, NULL);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_max,
+	set_temp1_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp1_max_hyst, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+
+/*
+ * Detection and registration
+ */
+
+static void lm92_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/* Start the conversions if needed */
+	config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG);
+	if (config & 0x01)
+		i2c_smbus_write_byte_data(client, LM92_REG_CONFIG,
+					  config & 0xFE);
+}
+
+/* The MAX6635 has no identification register, so we have to use tricks
+   to identify it reliably. This is somewhat slow.
+   Note that we do NOT rely on the 2 MSB of the configuration register
+   always reading 0, as suggested by the datasheet, because it was once
+   reported not to be true. */
+static int max6635_check(struct i2c_client *client)
+{
+	u16 temp_low, temp_high, temp_hyst, temp_crit;
+	u8 conf;
+	int i;
+
+	/* No manufacturer ID register, so a read from this address will
+	   always return the last read value. */
+	temp_low = i2c_smbus_read_word_data(client, LM92_REG_TEMP_LOW);
+	if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_low)
+		return 0;
+	temp_high = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HIGH);
+	if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_high)
+		return 0;
+	
+	/* Limits are stored as integer values (signed, 9-bit). */
+	if ((temp_low & 0x7f00) || (temp_high & 0x7f00))
+		return 0;
+	temp_hyst = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HYST);
+	temp_crit = i2c_smbus_read_word_data(client, LM92_REG_TEMP_CRIT);
+	if ((temp_hyst & 0x7f00) || (temp_crit & 0x7f00))
+		return 0;
+
+	/* Registers addresses were found to cycle over 16-byte boundaries.
+	   We don't test all registers with all offsets so as to save some
+	   reads and time, but this should still be sufficient to dismiss
+	   non-MAX6635 chips. */
+	conf = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG);
+	for (i=16; i<96; i*=2) {
+		if (temp_hyst != i2c_smbus_read_word_data(client,
+		 		 LM92_REG_TEMP_HYST + i - 16)
+		 || temp_crit != i2c_smbus_read_word_data(client,
+		 		 LM92_REG_TEMP_CRIT + i)
+		 || temp_low != i2c_smbus_read_word_data(client,
+				LM92_REG_TEMP_LOW + i + 16)
+		 || temp_high != i2c_smbus_read_word_data(client,
+		 		 LM92_REG_TEMP_HIGH + i + 32)
+		 || conf != i2c_smbus_read_byte_data(client,
+		 	    LM92_REG_CONFIG + i))
+			return 0;
+	}
+
+	return 1;
+}
+
+/* The following function does more than just detection. If detection
+   succeeds, it also registers the new chip. */
+static int lm92_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct lm92_data *data;
+	int err = 0;
+	char *name;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+					    | I2C_FUNC_SMBUS_WORD_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct lm92_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct lm92_data));
+
+	/* Fill in enough client fields so that we can read from the chip,
+	   which is required for identication */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm92_driver;
+	new_client->flags = 0;
+
+	/* A negative kind means that the driver was loaded with no force
+	   parameter (default), so we must identify the chip. */
+	if (kind < 0) {
+		u8 config = i2c_smbus_read_byte_data(new_client,
+			     LM92_REG_CONFIG);
+		u16 man_id = i2c_smbus_read_word_data(new_client,
+			     LM92_REG_MAN_ID);
+
+		if ((config & 0xe0) == 0x00
+		 && man_id == 0x0180) {
+			pr_info("lm92: Found National Semiconductor LM92 chip\n");
+	 		kind = lm92;
+		} else
+		if (max6635_check(new_client)) {
+			pr_info("lm92: Found Maxim MAX6635 chip\n");
+			kind = lm92; /* No separate prefix */
+		}
+		else
+			goto exit_free;
+	} else
+	if (kind == 0) /* Default to an LM92 if forced */
+		kind = lm92;
+
+	/* Give it the proper name */
+	if (kind == lm92) {
+		name = "lm92";
+	} else { /* Supposedly cannot happen */
+		dev_dbg(&new_client->dev, "Kind out of range?\n");
+		goto exit_free;
+	}
+
+	/* Fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the i2c subsystem a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the chipset */
+	lm92_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm92_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm92_detect);
+}
+
+static int lm92_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+
+/*
+ * Module and driver stuff
+ */
+
+static struct i2c_driver lm92_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm92",
+	.id		= I2C_DRIVERID_LM92,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm92_attach_adapter,
+	.detach_client	= lm92_detach_client,
+};
+
+static int __init sensors_lm92_init(void)
+{
+	return i2c_add_driver(&lm92_driver);
+}
+
+static void __exit sensors_lm92_exit(void)
+{
+	i2c_del_driver(&lm92_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM92/MAX6635 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm92_init);
+module_exit(sensors_lm92_exit);
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
new file mode 100644
index 000000000000..bf553dcd97d6
--- /dev/null
+++ b/drivers/hwmon/max1619.c
@@ -0,0 +1,372 @@
+/*
+ * max1619.c - Part of lm_sensors, Linux kernel modules for hardware
+ *             monitoring
+ * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru>
+ *                         Jean Delvare <khali@linux-fr.org>
+ *
+ * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
+ * It reports up to two temperatures (its own plus up to
+ * one external one). Complete datasheet can be
+ * obtained from Maxim's website at:
+ *   http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
+					0x29, 0x2a, 0x2b,
+					0x4c, 0x4d, 0x4e,
+					I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(max1619);
+
+/*
+ * The MAX1619 registers
+ */
+
+#define MAX1619_REG_R_MAN_ID		0xFE
+#define MAX1619_REG_R_CHIP_ID		0xFF
+#define MAX1619_REG_R_CONFIG		0x03
+#define MAX1619_REG_W_CONFIG		0x09
+#define MAX1619_REG_R_CONVRATE		0x04
+#define MAX1619_REG_W_CONVRATE		0x0A
+#define MAX1619_REG_R_STATUS		0x02
+#define MAX1619_REG_R_LOCAL_TEMP	0x00
+#define MAX1619_REG_R_REMOTE_TEMP	0x01
+#define MAX1619_REG_R_REMOTE_HIGH	0x07
+#define MAX1619_REG_W_REMOTE_HIGH	0x0D
+#define MAX1619_REG_R_REMOTE_LOW	0x08
+#define MAX1619_REG_W_REMOTE_LOW	0x0E
+#define MAX1619_REG_R_REMOTE_CRIT	0x10
+#define MAX1619_REG_W_REMOTE_CRIT	0x12
+#define MAX1619_REG_R_TCRIT_HYST	0x11
+#define MAX1619_REG_W_TCRIT_HYST	0x13
+
+/*
+ * Conversions and various macros
+ */
+
+#define TEMP_FROM_REG(val)	((val & 0x80 ? val-0x100 : val) * 1000)
+#define TEMP_TO_REG(val)	((val < 0 ? val+0x100*1000 : val) / 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int max1619_attach_adapter(struct i2c_adapter *adapter);
+static int max1619_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static void max1619_init_client(struct i2c_client *client);
+static int max1619_detach_client(struct i2c_client *client);
+static struct max1619_data *max1619_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver max1619_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "max1619",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= max1619_attach_adapter,
+	.detach_client	= max1619_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct max1619_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 temp_input1; /* local */
+	u8 temp_input2, temp_low2, temp_high2; /* remote */
+	u8 temp_crit2;
+	u8 temp_hyst2;
+	u8 alarms; 
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_temp(value) \
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct max1619_data *data = max1619_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+}
+show_temp(temp_input1);
+show_temp(temp_input2);
+show_temp(temp_low2);
+show_temp(temp_high2);
+show_temp(temp_crit2);
+show_temp(temp_hyst2);
+
+#define set_temp2(value, reg) \
+static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct max1619_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->value = TEMP_TO_REG(val); \
+	i2c_smbus_write_byte_data(client, reg, data->value); \
+	up(&data->update_lock); \
+	return count; \
+}
+
+set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW);
+set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH);
+set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT);
+set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST);
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct max1619_data *data = max1619_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
+static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2,
+	set_temp_low2);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2,
+	set_temp_high2);
+static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2,
+	set_temp_crit2);
+static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2,
+	set_temp_hyst2);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int max1619_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, max1619_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct max1619_data *data;
+	int err = 0;
+	const char *name = "";	
+	u8 reg_config=0, reg_convrate=0, reg_status=0;
+	u8 man_id, chip_id;
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct max1619_data));
+
+	/* The common I2C client data is placed right before the
+	   MAX1619-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &max1619_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+	if (kind < 0) { /* detection */
+		reg_config = i2c_smbus_read_byte_data(new_client,
+			      MAX1619_REG_R_CONFIG);
+		reg_convrate = i2c_smbus_read_byte_data(new_client,
+			       MAX1619_REG_R_CONVRATE);
+		reg_status = i2c_smbus_read_byte_data(new_client,
+				MAX1619_REG_R_STATUS);
+		if ((reg_config & 0x03) != 0x00
+		 || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) {
+			dev_dbg(&adapter->dev,
+				"MAX1619 detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+	
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 MAX1619_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  MAX1619_REG_R_CHIP_ID);
+		
+		if ((man_id == 0x4D) && (chip_id == 0x04)){  
+				kind = max1619;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	
+
+	if (kind == max1619){
+		name = "max1619";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the MAX1619 chip */
+	max1619_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void max1619_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/*
+	 * Start the conversions.
+	 */
+	i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE,
+				  5); /* 2 Hz */
+	config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
+	if (config & 0x40)
+		i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG,
+					  config & 0xBF); /* run */
+}
+
+static int max1619_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct max1619_data *max1619_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max1619_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		dev_dbg(&client->dev, "Updating max1619 data.\n");
+		data->temp_input1 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_LOCAL_TEMP);
+		data->temp_input2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_TEMP);
+		data->temp_high2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_HIGH);
+		data->temp_low2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_LOW);
+		data->temp_crit2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_CRIT);
+		data->temp_hyst2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_TCRIT_HYST);
+		data->alarms = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_STATUS);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_max1619_init(void)
+{
+	return i2c_add_driver(&max1619_driver);
+}
+
+static void __exit sensors_max1619_exit(void)
+{
+	i2c_del_driver(&max1619_driver);
+}
+
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+	"Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("MAX1619 sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_max1619_init);
+module_exit(sensors_max1619_exit);
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
new file mode 100644
index 000000000000..876c68f3af31
--- /dev/null
+++ b/drivers/hwmon/pc87360.c
@@ -0,0 +1,1348 @@
+/*
+ *  pc87360.c - Part of lm_sensors, Linux kernel modules
+ *              for hardware monitoring
+ *  Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ *
+ *  Copied from smsc47m1.c:
+ *  Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Supports the following chips:
+ *
+ *  Chip        #vin    #fan    #pwm    #temp   devid
+ *  PC87360     -       2       2       -       0xE1
+ *  PC87363     -       2       2       -       0xE8
+ *  PC87364     -       3       3       -       0xE4
+ *  PC87365     11      3       3       2       0xE5
+ *  PC87366     11      3       3       3-4     0xE9
+ *
+ *  This driver assumes that no more than one chip is present, and one of
+ *  the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F).
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+static struct i2c_force_data forces[] = {{ NULL }};
+static u8 devid;
+static unsigned int extra_isa[3];
+static u8 confreg[4];
+
+enum chips { any_chip, pc87360, pc87363, pc87364, pc87365, pc87366 };
+static struct i2c_address_data addr_data = {
+	.normal_i2c		= normal_i2c,
+	.normal_isa		= normal_isa,
+	.forces			= forces,
+};
+
+static int init = 1;
+module_param(init, int, 0);
+MODULE_PARM_DESC(init,
+ "Chip initialization level:\n"
+ " 0: None\n"
+ "*1: Forcibly enable internal voltage and temperature channels, except in9\n"
+ " 2: Forcibly enable all voltage and temperature channels, except in9\n"
+ " 3: Forcibly enable all voltage and temperature channels, including in9");
+
+/*
+ * Super-I/O registers and operations
+ */
+
+#define DEV	0x07	/* Register: Logical device select */
+#define DEVID	0x20	/* Register: Device ID */
+#define ACT	0x30	/* Register: Device activation */
+#define BASE	0x60	/* Register: Base address */
+
+#define FSCM	0x09	/* Logical device: fans */
+#define VLM	0x0d	/* Logical device: voltages */
+#define TMS	0x0e	/* Logical device: temperatures */
+static const u8 logdev[3] = { FSCM, VLM, TMS };
+
+#define LD_FAN		0
+#define LD_IN		1
+#define LD_TEMP		2
+
+static inline void superio_outb(int sioaddr, int reg, int val)
+{
+	outb(reg, sioaddr);
+	outb(val, sioaddr+1);
+}
+
+static inline int superio_inb(int sioaddr, int reg)
+{
+	outb(reg, sioaddr);
+	return inb(sioaddr+1);
+}
+
+static inline void superio_exit(int sioaddr)
+{
+	outb(0x02, sioaddr);
+	outb(0x02, sioaddr+1);
+}
+
+/*
+ * Logical devices
+ */
+
+#define PC87360_EXTENT		0x10
+#define PC87365_REG_BANK	0x09
+#define NO_BANK			0xff
+
+/*
+ * Fan registers and conversions
+ */
+
+/* nr has to be 0 or 1 (PC87360/87363) or 2 (PC87364/87365/87366) */
+#define PC87360_REG_PRESCALE(nr)	(0x00 + 2 * (nr))
+#define PC87360_REG_PWM(nr)		(0x01 + 2 * (nr))
+#define PC87360_REG_FAN_MIN(nr)		(0x06 + 3 * (nr))
+#define PC87360_REG_FAN(nr)		(0x07 + 3 * (nr))
+#define PC87360_REG_FAN_STATUS(nr)	(0x08 + 3 * (nr))
+
+#define FAN_FROM_REG(val,div)		((val) == 0 ? 0: \
+					 480000 / ((val)*(div)))
+#define FAN_TO_REG(val,div)		((val) <= 100 ? 0 : \
+					 480000 / ((val)*(div)))
+#define FAN_DIV_FROM_REG(val)		(1 << ((val >> 5) & 0x03))
+#define FAN_STATUS_FROM_REG(val)	((val) & 0x07)
+
+#define FAN_CONFIG_MONITOR(val,nr)	(((val) >> (2 + nr * 3)) & 1)
+#define FAN_CONFIG_CONTROL(val,nr)	(((val) >> (3 + nr * 3)) & 1)
+#define FAN_CONFIG_INVERT(val,nr)	(((val) >> (4 + nr * 3)) & 1)
+
+#define PWM_FROM_REG(val,inv)		((inv) ? 255 - (val) : (val))
+static inline u8 PWM_TO_REG(int val, int inv)
+{
+	if (inv)
+		val = 255 - val;
+	if (val < 0)
+		return 0;
+	if (val > 255)
+		return 255;
+	return val;
+}
+
+/*
+ * Voltage registers and conversions
+ */
+
+#define PC87365_REG_IN_CONVRATE		0x07
+#define PC87365_REG_IN_CONFIG		0x08
+#define PC87365_REG_IN			0x0B
+#define PC87365_REG_IN_MIN		0x0D
+#define PC87365_REG_IN_MAX		0x0C
+#define PC87365_REG_IN_STATUS		0x0A
+#define PC87365_REG_IN_ALARMS1		0x00
+#define PC87365_REG_IN_ALARMS2		0x01
+#define PC87365_REG_VID			0x06
+
+#define IN_FROM_REG(val,ref)		(((val) * (ref) + 128) / 256)
+#define IN_TO_REG(val,ref)		((val) < 0 ? 0 : \
+					 (val)*256 >= (ref)*255 ? 255: \
+					 ((val) * 256 + (ref)/2) / (ref))
+
+/*
+ * Temperature registers and conversions
+ */
+
+#define PC87365_REG_TEMP_CONFIG		0x08
+#define PC87365_REG_TEMP		0x0B
+#define PC87365_REG_TEMP_MIN		0x0D
+#define PC87365_REG_TEMP_MAX		0x0C
+#define PC87365_REG_TEMP_CRIT		0x0E
+#define PC87365_REG_TEMP_STATUS		0x0A
+#define PC87365_REG_TEMP_ALARMS		0x00
+
+#define TEMP_FROM_REG(val)		((val) * 1000)
+#define TEMP_TO_REG(val)		((val) < -55000 ? -55 : \
+					 (val) > 127000 ? 127 : \
+					 (val) < 0 ? ((val) - 500) / 1000 : \
+					 ((val) + 500) / 1000)
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct pc87360_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	int address[3];
+
+	u8 fannr, innr, tempnr;
+
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 fan_status[3];	/* Register value */
+	u8 pwm[3];		/* Register value */
+	u16 fan_conf;		/* Configuration register values, combined */
+
+	u16 in_vref;		/* 1 mV/bit */
+	u8 in[14];		/* Register value */
+	u8 in_min[14];		/* Register value */
+	u8 in_max[14];		/* Register value */
+	u8 in_crit[3];		/* Register value */
+	u8 in_status[14];	/* Register value */
+	u16 in_alarms;		/* Register values, combined, masked */
+	u8 vid_conf;		/* Configuration register value */
+	u8 vrm;
+	u8 vid;			/* Register value */
+
+	s8 temp[3];		/* Register value */
+	s8 temp_min[3];		/* Register value */
+	s8 temp_max[3];		/* Register value */
+	s8 temp_crit[3];	/* Register value */
+	u8 temp_status[3];	/* Register value */
+	u8 temp_alarms;		/* Register value, masked */
+};
+
+/*
+ * Functions declaration
+ */
+
+static int pc87360_attach_adapter(struct i2c_adapter *adapter);
+static int pc87360_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pc87360_detach_client(struct i2c_client *client);
+
+static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
+			      u8 reg);
+static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
+				u8 reg, u8 value);
+static void pc87360_init_client(struct i2c_client *client, int use_thermistors);
+static struct pc87360_data *pc87360_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver pc87360_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "pc87360",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= pc87360_attach_adapter,
+	.detach_client	= pc87360_detach_client,
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	long fan_min = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[nr]));
+
+	/* If it wouldn't fit, change clock divisor */
+	while (fan_min > 255
+	    && (data->fan_status[nr] & 0x60) != 0x60) {
+		fan_min >>= 1;
+		data->fan[nr] >>= 1;
+		data->fan_status[nr] += 0x20;
+	}
+	data->fan_min[nr] = fan_min > 255 ? 255 : fan_min;
+	pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(nr),
+			    data->fan_min[nr]);
+
+	/* Write new divider, preserve alarm bits */
+	pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(nr),
+			    data->fan_status[nr] & 0xF9);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define show_and_set_fan(offset) \
+static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[offset-1], \
+		       FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \
+} \
+static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[offset-1], \
+		       FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \
+} \
+static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", \
+		       FAN_DIV_FROM_REG(data->fan_status[offset-1])); \
+} \
+static ssize_t show_fan##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", \
+		       FAN_STATUS_FROM_REG(data->fan_status[offset-1])); \
+} \
+static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	return set_fan_min(dev, buf, count, offset-1); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+	show_fan##offset##_input, NULL); \
+static DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \
+	show_fan##offset##_min, set_fan##offset##_min); \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
+	show_fan##offset##_div, NULL); \
+static DEVICE_ATTR(fan##offset##_status, S_IRUGO, \
+	show_fan##offset##_status, NULL);
+show_and_set_fan(1)
+show_and_set_fan(2)
+show_and_set_fan(3)
+
+#define show_and_set_pwm(offset) \
+static ssize_t show_pwm##offset(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", \
+		       PWM_FROM_REG(data->pwm[offset-1], \
+				    FAN_CONFIG_INVERT(data->fan_conf, \
+						      offset-1))); \
+} \
+static ssize_t set_pwm##offset(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->pwm[offset-1] = PWM_TO_REG(val, \
+			      FAN_CONFIG_INVERT(data->fan_conf, offset-1)); \
+	pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(offset-1), \
+			    data->pwm[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \
+	show_pwm##offset, set_pwm##offset);
+show_and_set_pwm(1)
+show_and_set_pwm(2)
+show_and_set_pwm(3)
+
+#define show_and_set_in(offset) \
+static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
+		       data->in_vref)); \
+} \
+static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
+		       data->in_vref)); \
+} \
+static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
+		       data->in_vref)); \
+} \
+static ssize_t show_in##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", data->in_status[offset]); \
+} \
+static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_min[offset] = IN_TO_REG(val, data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MIN, \
+			    data->in_min[offset]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_max[offset] = IN_TO_REG(val, \
+			       data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MAX, \
+			    data->in_max[offset]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+	show_in##offset##_input, NULL); \
+static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
+	show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
+	show_in##offset##_max, set_in##offset##_max); \
+static DEVICE_ATTR(in##offset##_status, S_IRUGO, \
+	show_in##offset##_status, NULL);
+show_and_set_in(0)
+show_and_set_in(1)
+show_and_set_in(2)
+show_and_set_in(3)
+show_and_set_in(4)
+show_and_set_in(5)
+show_and_set_in(6)
+show_and_set_in(7)
+show_and_set_in(8)
+show_and_set_in(9)
+show_and_set_in(10)
+
+#define show_and_set_therm(offset) \
+static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset+7], \
+		       data->in_vref)); \
+} \
+static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset+7], \
+		       data->in_vref)); \
+} \
+static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset+7], \
+		       data->in_vref)); \
+} \
+static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[offset-4], \
+		       data->in_vref)); \
+} \
+static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%u\n", data->in_status[offset+7]); \
+} \
+static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_min[offset+7] = IN_TO_REG(val, data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MIN, \
+			    data->in_min[offset+7]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_max[offset+7] = IN_TO_REG(val, data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MAX, \
+			    data->in_max[offset+7]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_crit[offset-4] = IN_TO_REG(val, data->in_vref); \
+	pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_CRIT, \
+			    data->in_crit[offset-4]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+	show_temp##offset##_input, NULL); \
+static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_min, set_temp##offset##_min); \
+static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_max, set_temp##offset##_max); \
+static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_crit, set_temp##offset##_crit); \
+static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
+	show_temp##offset##_status, NULL);
+show_and_set_therm(4)
+show_and_set_therm(5)
+show_and_set_therm(6)
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pc87360_data *data = pc87360_update_device(dev);
+	return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pc87360_data *data = pc87360_update_device(dev);
+	return sprintf(buf, "%u\n", data->vrm);
+}
+static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	data->vrm = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+
+static ssize_t show_in_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pc87360_data *data = pc87360_update_device(dev);
+	return sprintf(buf, "%u\n", data->in_alarms);
+}
+static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL);
+
+#define show_and_set_temp(offset) \
+static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
+} \
+static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
+} \
+static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
+}\
+static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[offset-1])); \
+}\
+static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct pc87360_data *data = pc87360_update_device(dev); \
+	return sprintf(buf, "%d\n", data->temp_status[offset-1]); \
+}\
+static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_min[offset-1] = TEMP_TO_REG(val); \
+	pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MIN, \
+			    data->temp_min[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_max[offset-1] = TEMP_TO_REG(val); \
+	pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MAX, \
+			    data->temp_max[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct pc87360_data *data = i2c_get_clientdata(client); \
+	long val = simple_strtol(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp_crit[offset-1] = TEMP_TO_REG(val); \
+	pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_CRIT, \
+			    data->temp_crit[offset-1]); \
+	up(&data->update_lock); \
+	return count; \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+	show_temp##offset##_input, NULL); \
+static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_min, set_temp##offset##_min); \
+static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_max, set_temp##offset##_max); \
+static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
+	show_temp##offset##_crit, set_temp##offset##_crit); \
+static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
+	show_temp##offset##_status, NULL);
+show_and_set_temp(1)
+show_and_set_temp(2)
+show_and_set_temp(3)
+
+static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pc87360_data *data = pc87360_update_device(dev);
+	return sprintf(buf, "%u\n", data->temp_alarms);
+}
+static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL);
+
+/*
+ * Device detection, registration and update
+ */
+
+static int pc87360_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, pc87360_detect);
+}
+
+static int pc87360_find(int sioaddr, u8 *devid, int *address)
+{
+	u16 val;
+	int i;
+	int nrdev; /* logical device count */
+
+	/* No superio_enter */
+
+	/* Identify device */
+	val = superio_inb(sioaddr, DEVID);
+	switch (val) {
+	case 0xE1: /* PC87360 */
+	case 0xE8: /* PC87363 */
+	case 0xE4: /* PC87364 */
+		nrdev = 1;
+		break;
+	case 0xE5: /* PC87365 */
+	case 0xE9: /* PC87366 */
+		nrdev = 3;
+		break;
+	default:
+		superio_exit(sioaddr);
+		return -ENODEV;
+	}
+	/* Remember the device id */
+	*devid = val;
+
+	for (i = 0; i < nrdev; i++) {
+		/* select logical device */
+		superio_outb(sioaddr, DEV, logdev[i]);
+
+		val = superio_inb(sioaddr, ACT);
+		if (!(val & 0x01)) {
+			printk(KERN_INFO "pc87360: Device 0x%02x not "
+			       "activated\n", logdev[i]);
+			continue;
+		}
+
+		val = (superio_inb(sioaddr, BASE) << 8)
+		    | superio_inb(sioaddr, BASE + 1);
+		if (!val) {
+			printk(KERN_INFO "pc87360: Base address not set for "
+			       "device 0x%02x\n", logdev[i]);
+			continue;
+		}
+
+		address[i] = val;
+
+		if (i==0) { /* Fans */
+			confreg[0] = superio_inb(sioaddr, 0xF0);
+			confreg[1] = superio_inb(sioaddr, 0xF1);
+
+#ifdef DEBUG
+			printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
+			       "ctrl=%d inv=%d\n", (confreg[0]>>2)&1,
+			       (confreg[0]>>3)&1, (confreg[0]>>4)&1);
+			printk(KERN_DEBUG "pc87360: Fan 2: mon=%d "
+			       "ctrl=%d inv=%d\n", (confreg[0]>>5)&1,
+			       (confreg[0]>>6)&1, (confreg[0]>>7)&1);
+			printk(KERN_DEBUG "pc87360: Fan 3: mon=%d "
+			       "ctrl=%d inv=%d\n", confreg[1]&1,
+			       (confreg[1]>>1)&1, (confreg[1]>>2)&1);
+#endif
+		} else if (i==1) { /* Voltages */
+			/* Are we using thermistors? */
+			if (*devid == 0xE9) { /* PC87366 */
+				/* These registers are not logical-device
+				   specific, just that we won't need them if
+				   we don't use the VLM device */
+				confreg[2] = superio_inb(sioaddr, 0x2B);
+				confreg[3] = superio_inb(sioaddr, 0x25);
+
+				if (confreg[2] & 0x40) {
+					printk(KERN_INFO "pc87360: Using "
+					       "thermistors for temperature "
+					       "monitoring\n");
+				}
+				if (confreg[3] & 0xE0) {
+					printk(KERN_INFO "pc87360: VID "
+					       "inputs routed (mode %u)\n",
+					       confreg[3] >> 5);
+				}
+			}
+		}
+	}
+
+	superio_exit(sioaddr);
+	return 0;
+}
+
+/* We don't really care about the address.
+   Read from extra_isa instead. */
+int pc87360_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	struct i2c_client *new_client;
+	struct pc87360_data *data;
+	int err = 0;
+	const char *name = "pc87360";
+	int use_thermistors = 0;
+
+	if (!i2c_is_isa_adapter(adapter))
+		return -ENODEV;
+
+	if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
+		return -ENOMEM;
+	memset(data, 0x00, sizeof(struct pc87360_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &pc87360_driver;
+	new_client->flags = 0;
+
+	data->fannr = 2;
+	data->innr = 0;
+	data->tempnr = 0;
+
+	switch (devid) {
+	case 0xe8:
+		name = "pc87363";
+		break;
+	case 0xe4:
+		name = "pc87364";
+		data->fannr = 3;
+		break;
+	case 0xe5:
+		name = "pc87365";
+		data->fannr = extra_isa[0] ? 3 : 0;
+		data->innr = extra_isa[1] ? 11 : 0;
+		data->tempnr = extra_isa[2] ? 2 : 0;
+		break;
+	case 0xe9:
+		name = "pc87366";
+		data->fannr = extra_isa[0] ? 3 : 0;
+		data->innr = extra_isa[1] ? 14 : 0;
+		data->tempnr = extra_isa[2] ? 3 : 0;
+		break;
+	}
+
+	strcpy(new_client->name, name);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	for (i = 0; i < 3; i++) {
+		if (((data->address[i] = extra_isa[i]))
+		 && !request_region(extra_isa[i], PC87360_EXTENT,
+		 		    pc87360_driver.name)) {
+			dev_err(&new_client->dev, "Region 0x%x-0x%x already "
+				"in use!\n", extra_isa[i],
+				extra_isa[i]+PC87360_EXTENT-1);
+			for (i--; i >= 0; i--)
+				release_region(extra_isa[i], PC87360_EXTENT);
+			err = -EBUSY;
+			goto ERROR1;
+		}
+	}
+
+	/* Retrieve the fans configuration from Super-I/O space */
+	if (data->fannr)
+		data->fan_conf = confreg[0] | (confreg[1] << 8);
+
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	/* Use the correct reference voltage
+	   Unless both the VLM and the TMS logical devices agree to
+	   use an external Vref, the internal one is used. */
+	if (data->innr) {
+		i = pc87360_read_value(data, LD_IN, NO_BANK,
+				       PC87365_REG_IN_CONFIG);
+		if (data->tempnr) {
+			i &= pc87360_read_value(data, LD_TEMP, NO_BANK,
+						PC87365_REG_TEMP_CONFIG);
+		}
+		data->in_vref = (i&0x02) ? 3025 : 2966;
+		dev_dbg(&new_client->dev, "Using %s reference voltage\n",
+			(i&0x02) ? "external" : "internal");
+
+		data->vid_conf = confreg[3];
+		data->vrm = 90;
+	}
+
+	/* Fan clock dividers may be needed before any data is read */
+	for (i = 0; i < data->fannr; i++) {
+		if (FAN_CONFIG_MONITOR(data->fan_conf, i))
+			data->fan_status[i] = pc87360_read_value(data,
+					      LD_FAN, NO_BANK,
+					      PC87360_REG_FAN_STATUS(i));
+	}
+
+	if (init > 0) {
+		if (devid == 0xe9 && data->address[1]) /* PC87366 */
+			use_thermistors = confreg[2] & 0x40;
+
+		pc87360_init_client(new_client, use_thermistors);
+	}
+
+	/* Register sysfs hooks */
+	if (data->innr) {
+		device_create_file(&new_client->dev, &dev_attr_in0_input);
+		device_create_file(&new_client->dev, &dev_attr_in1_input);
+		device_create_file(&new_client->dev, &dev_attr_in2_input);
+		device_create_file(&new_client->dev, &dev_attr_in3_input);
+		device_create_file(&new_client->dev, &dev_attr_in4_input);
+		device_create_file(&new_client->dev, &dev_attr_in5_input);
+		device_create_file(&new_client->dev, &dev_attr_in6_input);
+		device_create_file(&new_client->dev, &dev_attr_in7_input);
+		device_create_file(&new_client->dev, &dev_attr_in8_input);
+		device_create_file(&new_client->dev, &dev_attr_in9_input);
+		device_create_file(&new_client->dev, &dev_attr_in10_input);
+		device_create_file(&new_client->dev, &dev_attr_in0_min);
+		device_create_file(&new_client->dev, &dev_attr_in1_min);
+		device_create_file(&new_client->dev, &dev_attr_in2_min);
+		device_create_file(&new_client->dev, &dev_attr_in3_min);
+		device_create_file(&new_client->dev, &dev_attr_in4_min);
+		device_create_file(&new_client->dev, &dev_attr_in5_min);
+		device_create_file(&new_client->dev, &dev_attr_in6_min);
+		device_create_file(&new_client->dev, &dev_attr_in7_min);
+		device_create_file(&new_client->dev, &dev_attr_in8_min);
+		device_create_file(&new_client->dev, &dev_attr_in9_min);
+		device_create_file(&new_client->dev, &dev_attr_in10_min);
+		device_create_file(&new_client->dev, &dev_attr_in0_max);
+		device_create_file(&new_client->dev, &dev_attr_in1_max);
+		device_create_file(&new_client->dev, &dev_attr_in2_max);
+		device_create_file(&new_client->dev, &dev_attr_in3_max);
+		device_create_file(&new_client->dev, &dev_attr_in4_max);
+		device_create_file(&new_client->dev, &dev_attr_in5_max);
+		device_create_file(&new_client->dev, &dev_attr_in6_max);
+		device_create_file(&new_client->dev, &dev_attr_in7_max);
+		device_create_file(&new_client->dev, &dev_attr_in8_max);
+		device_create_file(&new_client->dev, &dev_attr_in9_max);
+		device_create_file(&new_client->dev, &dev_attr_in10_max);
+		device_create_file(&new_client->dev, &dev_attr_in0_status);
+		device_create_file(&new_client->dev, &dev_attr_in1_status);
+		device_create_file(&new_client->dev, &dev_attr_in2_status);
+		device_create_file(&new_client->dev, &dev_attr_in3_status);
+		device_create_file(&new_client->dev, &dev_attr_in4_status);
+		device_create_file(&new_client->dev, &dev_attr_in5_status);
+		device_create_file(&new_client->dev, &dev_attr_in6_status);
+		device_create_file(&new_client->dev, &dev_attr_in7_status);
+		device_create_file(&new_client->dev, &dev_attr_in8_status);
+		device_create_file(&new_client->dev, &dev_attr_in9_status);
+		device_create_file(&new_client->dev, &dev_attr_in10_status);
+
+		device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+		device_create_file(&new_client->dev, &dev_attr_vrm);
+		device_create_file(&new_client->dev, &dev_attr_alarms_in);
+	}
+
+	if (data->tempnr) {
+		device_create_file(&new_client->dev, &dev_attr_temp1_input);
+		device_create_file(&new_client->dev, &dev_attr_temp2_input);
+		device_create_file(&new_client->dev, &dev_attr_temp1_min);
+		device_create_file(&new_client->dev, &dev_attr_temp2_min);
+		device_create_file(&new_client->dev, &dev_attr_temp1_max);
+		device_create_file(&new_client->dev, &dev_attr_temp2_max);
+		device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp1_status);
+		device_create_file(&new_client->dev, &dev_attr_temp2_status);
+
+		device_create_file(&new_client->dev, &dev_attr_alarms_temp);
+	}
+	if (data->tempnr == 3) {
+		device_create_file(&new_client->dev, &dev_attr_temp3_input);
+		device_create_file(&new_client->dev, &dev_attr_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp3_status);
+	}
+	if (data->innr == 14) {
+		device_create_file(&new_client->dev, &dev_attr_temp4_input);
+		device_create_file(&new_client->dev, &dev_attr_temp5_input);
+		device_create_file(&new_client->dev, &dev_attr_temp6_input);
+		device_create_file(&new_client->dev, &dev_attr_temp4_min);
+		device_create_file(&new_client->dev, &dev_attr_temp5_min);
+		device_create_file(&new_client->dev, &dev_attr_temp6_min);
+		device_create_file(&new_client->dev, &dev_attr_temp4_max);
+		device_create_file(&new_client->dev, &dev_attr_temp5_max);
+		device_create_file(&new_client->dev, &dev_attr_temp6_max);
+		device_create_file(&new_client->dev, &dev_attr_temp4_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp5_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp6_crit);
+		device_create_file(&new_client->dev, &dev_attr_temp4_status);
+		device_create_file(&new_client->dev, &dev_attr_temp5_status);
+		device_create_file(&new_client->dev, &dev_attr_temp6_status);
+	}
+
+	if (data->fannr) {
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_status);
+		}
+
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_status);
+		}
+
+		if (FAN_CONFIG_CONTROL(data->fan_conf, 0))
+			device_create_file(&new_client->dev, &dev_attr_pwm1);
+		if (FAN_CONFIG_CONTROL(data->fan_conf, 1))
+			device_create_file(&new_client->dev, &dev_attr_pwm2);
+	}
+	if (data->fannr == 3) {
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_status);
+		}
+
+		if (FAN_CONFIG_CONTROL(data->fan_conf, 2))
+			device_create_file(&new_client->dev, &dev_attr_pwm3);
+	}
+
+	return 0;
+
+ERROR2:
+	for (i = 0; i < 3; i++) {
+		if (data->address[i]) {
+			release_region(data->address[i], PC87360_EXTENT);
+		}
+	}
+ERROR1:
+	kfree(data);
+	return err;
+}
+
+static int pc87360_detach_client(struct i2c_client *client)
+{
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	int i;
+
+	if ((i = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return i;
+	}
+
+	for (i = 0; i < 3; i++) {
+		if (data->address[i]) {
+			release_region(data->address[i], PC87360_EXTENT);
+		}
+	}
+	kfree(data);
+
+	return 0;
+}
+
+/* ldi is the logical device index
+   bank is for voltages and temperatures only */
+static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
+			      u8 reg)
+{
+	int res;
+
+	down(&(data->lock));
+	if (bank != NO_BANK)
+		outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
+	res = inb_p(data->address[ldi] + reg);
+	up(&(data->lock));
+
+	return res;
+}
+
+static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
+				u8 reg, u8 value)
+{
+	down(&(data->lock));
+	if (bank != NO_BANK)
+		outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
+	outb_p(value, data->address[ldi] + reg);
+	up(&(data->lock));
+}
+
+static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
+{
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	int i, nr;
+	const u8 init_in[14] = { 2, 2, 2, 2, 2, 2, 2, 1, 1, 3, 1, 2, 2, 2 };
+	const u8 init_temp[3] = { 2, 2, 1 };
+	u8 reg;
+
+	if (init >= 2 && data->innr) {
+		reg = pc87360_read_value(data, LD_IN, NO_BANK,
+					 PC87365_REG_IN_CONVRATE);
+		dev_info(&client->dev, "VLM conversion set to"
+			 "1s period, 160us delay\n");
+		pc87360_write_value(data, LD_IN, NO_BANK,
+				    PC87365_REG_IN_CONVRATE,
+				    (reg & 0xC0) | 0x11);
+	}
+
+	nr = data->innr < 11 ? data->innr : 11;
+	for (i=0; i<nr; i++) {
+		if (init >= init_in[i]) {
+			/* Forcibly enable voltage channel */
+			reg = pc87360_read_value(data, LD_IN, i,
+						 PC87365_REG_IN_STATUS);
+			if (!(reg & 0x01)) {
+				dev_dbg(&client->dev, "Forcibly "
+					"enabling in%d\n", i);
+				pc87360_write_value(data, LD_IN, i,
+						    PC87365_REG_IN_STATUS,
+						    (reg & 0x68) | 0x87);
+			}
+		}
+	}
+
+	/* We can't blindly trust the Super-I/O space configuration bit,
+	   most BIOS won't set it properly */
+	for (i=11; i<data->innr; i++) {
+		reg = pc87360_read_value(data, LD_IN, i,
+					 PC87365_REG_TEMP_STATUS);
+		use_thermistors = use_thermistors || (reg & 0x01);
+	}
+
+	i = use_thermistors ? 2 : 0;
+	for (; i<data->tempnr; i++) {
+		if (init >= init_temp[i]) {
+			/* Forcibly enable temperature channel */
+			reg = pc87360_read_value(data, LD_TEMP, i,
+						 PC87365_REG_TEMP_STATUS);
+			if (!(reg & 0x01)) {
+				dev_dbg(&client->dev, "Forcibly "
+					"enabling temp%d\n", i+1);
+				pc87360_write_value(data, LD_TEMP, i,
+						    PC87365_REG_TEMP_STATUS,
+						    0xCF);
+			}
+		}
+	}
+
+	if (use_thermistors) {
+		for (i=11; i<data->innr; i++) {
+			if (init >= init_in[i]) {
+				/* The pin may already be used by thermal
+				   diodes */
+				reg = pc87360_read_value(data, LD_TEMP,
+				      (i-11)/2, PC87365_REG_TEMP_STATUS);
+				if (reg & 0x01) {
+					dev_dbg(&client->dev, "Skipping "
+						"temp%d, pin already in use "
+						"by temp%d\n", i-7, (i-11)/2);
+					continue;
+				}
+
+				/* Forcibly enable thermistor channel */
+				reg = pc87360_read_value(data, LD_IN, i,
+							 PC87365_REG_IN_STATUS);
+				if (!(reg & 0x01)) {
+					dev_dbg(&client->dev, "Forcibly "
+						"enabling temp%d\n", i-7);
+					pc87360_write_value(data, LD_IN, i,
+						PC87365_REG_TEMP_STATUS,
+						(reg & 0x60) | 0x8F);
+				}
+			}
+		}
+	}
+
+	if (data->innr) {
+		reg = pc87360_read_value(data, LD_IN, NO_BANK,
+					 PC87365_REG_IN_CONFIG);
+		if (reg & 0x01) {
+			dev_dbg(&client->dev, "Forcibly "
+				"enabling monitoring (VLM)\n");
+			pc87360_write_value(data, LD_IN, NO_BANK,
+					    PC87365_REG_IN_CONFIG,
+					    reg & 0xFE);
+		}
+	}
+
+	if (data->tempnr) {
+		reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
+					 PC87365_REG_TEMP_CONFIG);
+		if (reg & 0x01) {
+			dev_dbg(&client->dev, "Forcibly enabling "
+				"monitoring (TMS)\n");
+			pc87360_write_value(data, LD_TEMP, NO_BANK,
+					    PC87365_REG_TEMP_CONFIG,
+					    reg & 0xFE);
+		}
+
+		if (init >= 2) {
+			/* Chip config as documented by National Semi. */
+			pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08);
+			/* We voluntarily omit the bank here, in case the
+			   sequence itself matters. It shouldn't be a problem,
+			   since nobody else is supposed to access the
+			   device at that point. */
+			pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04);
+			pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35);
+			pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05);
+			pc87360_write_value(data, LD_TEMP, NO_BANK, 0xE, 0x05);
+		}
+	}
+}
+
+static void pc87360_autodiv(struct i2c_client *client, int nr)
+{
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	u8 old_min = data->fan_min[nr];
+
+	/* Increase clock divider if needed and possible */
+	if ((data->fan_status[nr] & 0x04) /* overflow flag */
+	 || (data->fan[nr] >= 224)) { /* next to overflow */
+		if ((data->fan_status[nr] & 0x60) != 0x60) {
+			data->fan_status[nr] += 0x20;
+			data->fan_min[nr] >>= 1;
+			data->fan[nr] >>= 1;
+			dev_dbg(&client->dev, "Increasing "
+				"clock divider to %d for fan %d\n",
+				FAN_DIV_FROM_REG(data->fan_status[nr]), nr+1);
+		}
+	} else {
+		/* Decrease clock divider if possible */
+		while (!(data->fan_min[nr] & 0x80) /* min "nails" divider */
+		 && data->fan[nr] < 85 /* bad accuracy */
+		 && (data->fan_status[nr] & 0x60) != 0x00) {
+			data->fan_status[nr] -= 0x20;
+			data->fan_min[nr] <<= 1;
+			data->fan[nr] <<= 1;
+			dev_dbg(&client->dev, "Decreasing "
+				"clock divider to %d for fan %d\n",
+				FAN_DIV_FROM_REG(data->fan_status[nr]),
+				nr+1);
+		}
+	}
+
+	/* Write new fan min if it changed */
+	if (old_min != data->fan_min[nr]) {
+		pc87360_write_value(data, LD_FAN, NO_BANK,
+				    PC87360_REG_FAN_MIN(nr),
+				    data->fan_min[nr]);
+	}
+}
+
+static struct pc87360_data *pc87360_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pc87360_data *data = i2c_get_clientdata(client);
+	u8 i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+		dev_dbg(&client->dev, "Data update\n");
+
+		/* Fans */
+		for (i = 0; i < data->fannr; i++) {
+			if (FAN_CONFIG_MONITOR(data->fan_conf, i)) {
+				data->fan_status[i] =
+					pc87360_read_value(data, LD_FAN,
+					NO_BANK, PC87360_REG_FAN_STATUS(i));
+				data->fan[i] = pc87360_read_value(data, LD_FAN,
+					       NO_BANK, PC87360_REG_FAN(i));
+				data->fan_min[i] = pc87360_read_value(data,
+						   LD_FAN, NO_BANK,
+						   PC87360_REG_FAN_MIN(i));
+				/* Change clock divider if needed */
+				pc87360_autodiv(client, i);
+				/* Clear bits and write new divider */
+				pc87360_write_value(data, LD_FAN, NO_BANK,
+						    PC87360_REG_FAN_STATUS(i),
+						    data->fan_status[i]);
+			}
+			if (FAN_CONFIG_CONTROL(data->fan_conf, i))
+				data->pwm[i] = pc87360_read_value(data, LD_FAN,
+					       NO_BANK, PC87360_REG_PWM(i));
+		}
+
+		/* Voltages */
+		for (i = 0; i < data->innr; i++) {
+			data->in_status[i] = pc87360_read_value(data, LD_IN, i,
+					     PC87365_REG_IN_STATUS);
+			/* Clear bits */
+			pc87360_write_value(data, LD_IN, i,
+					    PC87365_REG_IN_STATUS,
+					    data->in_status[i]);
+			if ((data->in_status[i] & 0x81) == 0x81) {
+				data->in[i] = pc87360_read_value(data, LD_IN,
+					      i, PC87365_REG_IN);
+			}
+			if (data->in_status[i] & 0x01) {
+				data->in_min[i] = pc87360_read_value(data,
+						  LD_IN, i,
+						  PC87365_REG_IN_MIN);
+				data->in_max[i] = pc87360_read_value(data,
+						  LD_IN, i,
+						  PC87365_REG_IN_MAX);
+				if (i >= 11)
+					data->in_crit[i-11] =
+						pc87360_read_value(data, LD_IN,
+						i, PC87365_REG_TEMP_CRIT);
+			}
+		}
+		if (data->innr) {
+			data->in_alarms = pc87360_read_value(data, LD_IN,
+					  NO_BANK, PC87365_REG_IN_ALARMS1)
+					| ((pc87360_read_value(data, LD_IN,
+					    NO_BANK, PC87365_REG_IN_ALARMS2)
+					    & 0x07) << 8);
+			data->vid = (data->vid_conf & 0xE0) ?
+				    pc87360_read_value(data, LD_IN,
+				    NO_BANK, PC87365_REG_VID) : 0x1F;
+		}
+
+		/* Temperatures */
+		for (i = 0; i < data->tempnr; i++) {
+			data->temp_status[i] = pc87360_read_value(data,
+					       LD_TEMP, i,
+					       PC87365_REG_TEMP_STATUS);
+			/* Clear bits */
+			pc87360_write_value(data, LD_TEMP, i,
+					    PC87365_REG_TEMP_STATUS,
+					    data->temp_status[i]);
+			if ((data->temp_status[i] & 0x81) == 0x81) {
+				data->temp[i] = pc87360_read_value(data,
+						LD_TEMP, i,
+						PC87365_REG_TEMP);
+			}
+			if (data->temp_status[i] & 0x01) {
+				data->temp_min[i] = pc87360_read_value(data,
+						    LD_TEMP, i,
+						    PC87365_REG_TEMP_MIN);
+				data->temp_max[i] = pc87360_read_value(data,
+						    LD_TEMP, i,
+						    PC87365_REG_TEMP_MAX);
+				data->temp_crit[i] = pc87360_read_value(data,
+						     LD_TEMP, i,
+						     PC87365_REG_TEMP_CRIT);
+			}
+		}
+		if (data->tempnr) {
+			data->temp_alarms = pc87360_read_value(data, LD_TEMP,
+					    NO_BANK, PC87365_REG_TEMP_ALARMS)
+					    & 0x3F;
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init pc87360_init(void)
+{
+	int i;
+
+	if (pc87360_find(0x2e, &devid, extra_isa)
+	 && pc87360_find(0x4e, &devid, extra_isa)) {
+		printk(KERN_WARNING "pc87360: PC8736x not detected, "
+		       "module not inserted.\n");
+		return -ENODEV;
+	}
+
+	/* Arbitrarily pick one of the addresses */
+	for (i = 0; i < 3; i++) {
+		if (extra_isa[i] != 0x0000) {
+			normal_isa[0] = extra_isa[i];
+			break;
+		}
+	}
+
+	if (normal_isa[0] == 0x0000) {
+		printk(KERN_WARNING "pc87360: No active logical device, "
+		       "module not inserted.\n");
+		return -ENODEV;
+	}
+
+	return i2c_add_driver(&pc87360_driver);
+}
+
+static void __exit pc87360_exit(void)
+{
+	i2c_del_driver(&pc87360_driver);
+}
+
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("PC8736x hardware monitor");
+MODULE_LICENSE("GPL");
+
+module_init(pc87360_init);
+module_exit(pc87360_exit);
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
new file mode 100644
index 000000000000..6bbfc8fb4f13
--- /dev/null
+++ b/drivers/hwmon/sis5595.c
@@ -0,0 +1,817 @@
+/*
+    sis5595.c - Part of lm_sensors, Linux kernel modules
+		for hardware monitoring
+
+    Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
+			Kyösti Mälkki <kmalkki@cc.hut.fi>, and
+			Mark D. Studebaker <mdsxyz123@yahoo.com>
+    Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
+    the help of Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   SiS southbridge has a LM78-like chip integrated on the same IC.
+   This driver is a customized copy of lm78.c
+   
+   Supports following revisions:
+	Version		PCI ID		PCI Revision
+	1		1039/0008	AF or less
+	2		1039/0008	B0 or greater
+
+   Note: these chips contain a 0008 device which is incompatible with the
+	 5595. We recognize these by the presence of the listed
+	 "blacklist" PCI ID and refuse to load.
+
+   NOT SUPPORTED	PCI ID		BLACKLIST PCI ID	
+	 540		0008		0540
+	 550		0008		0550
+	5513		0008		5511
+	5581		0008		5597
+	5582		0008		5597
+	5597		0008		5597
+	5598		0008		5597/5598
+	 630		0008		0630
+	 645		0008		0645
+	 730		0008		0730
+	 735		0008		0735
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <asm/io.h>
+
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+
+/* Addresses to scan.
+   Note that we can't determine the ISA address until we have initialized
+   our module */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(sis5595);
+
+/* Many SIS5595 constants specified below */
+
+/* Length of ISA address segment */
+#define SIS5595_EXTENT 8
+/* PCI Config Registers */
+#define SIS5595_REVISION_REG 0x08
+#define SIS5595_BASE_REG 0x68
+#define SIS5595_PIN_REG 0x7A
+#define SIS5595_ENABLE_REG 0x7B
+
+/* Where are the ISA address/data registers relative to the base address */
+#define SIS5595_ADDR_REG_OFFSET 5
+#define SIS5595_DATA_REG_OFFSET 6
+
+/* The SIS5595 registers */
+#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2)
+#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2)
+#define SIS5595_REG_IN(nr) (0x20 + (nr))
+
+#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr))
+#define SIS5595_REG_FAN(nr) (0x28 + (nr))
+
+/* On the first version of the chip, the temp registers are separate.
+   On the second version,
+   TEMP pin is shared with IN4, configured in PCI register 0x7A.
+   The registers are the same as well.
+   OVER and HYST are really MAX and MIN. */
+
+#define REV2MIN	0xb0
+#define SIS5595_REG_TEMP 	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN(4) : 0x27
+#define SIS5595_REG_TEMP_OVER	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN_MAX(4) : 0x39
+#define SIS5595_REG_TEMP_HYST	(( data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN_MIN(4) : 0x3a
+
+#define SIS5595_REG_CONFIG 0x40
+#define SIS5595_REG_ALARM1 0x41
+#define SIS5595_REG_ALARM2 0x42
+#define SIS5595_REG_FANDIV 0x47
+
+/* Conversions. Limit checking is only done on the TO_REG
+   variants. */
+
+/* IN: mV, (0V to 4.08V)
+   REG: 16mV/bit */
+static inline u8 IN_TO_REG(unsigned long val)
+{
+	unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
+	return (nval + 8) / 16;
+}
+#define IN_FROM_REG(val) ((val) *  16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm <= 0)
+		return 255;
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static inline int FAN_FROM_REG(u8 val, int div)
+{
+	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
+}
+
+/* TEMP: mC (-54.12C to +157.53C)
+   REG: 0.83C/bit + 52.12, two's complement  */
+static inline int TEMP_FROM_REG(s8 val)
+{
+	return val * 830 + 52120;
+}
+static inline s8 TEMP_TO_REG(int val)
+{
+	int nval = SENSORS_LIMIT(val, -54120, 157530) ;
+	return nval<0 ? (nval-5212-415)/830 : (nval-5212+415)/830;
+}
+
+/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
+   REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
+static inline u8 DIV_TO_REG(int val)
+{
+	return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* For the SIS5595, we need to keep some data in memory. That
+   data is pointed to by sis5595_list[NR]->data. The structure itself is
+   dynamically allocated, at the time when the new sis5595 client is
+   allocated. */
+struct sis5595_data {
+	struct i2c_client client;
+	struct semaphore lock;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	char maxins;		/* == 3 if temp enabled, otherwise == 4 */
+	u8 revision;		/* Reg. value */
+
+	u8 in[5];		/* Register value */
+	u8 in_max[5];		/* Register value */
+	u8 in_min[5];		/* Register value */
+	u8 fan[2];		/* Register value */
+	u8 fan_min[2];		/* Register value */
+	s8 temp;		/* Register value */
+	s8 temp_over;		/* Register value */
+	s8 temp_hyst;		/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+static struct pci_dev *s_bridge;	/* pointer to the (only) sis5595 */
+
+static int sis5595_attach_adapter(struct i2c_adapter *adapter);
+static int sis5595_detect(struct i2c_adapter *adapter, int address, int kind);
+static int sis5595_detach_client(struct i2c_client *client);
+
+static int sis5595_read_value(struct i2c_client *client, u8 register);
+static int sis5595_write_value(struct i2c_client *client, u8 register, u8 value);
+static struct sis5595_data *sis5595_update_device(struct device *dev);
+static void sis5595_init_client(struct i2c_client *client);
+
+static struct i2c_driver sis5595_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "sis5595",
+	.id		= I2C_DRIVERID_SIS5595,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= sis5595_attach_adapter,
+	.detach_client	= sis5595_detach_client,
+};
+
+/* 4 Voltages */
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf,
+	       size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_max(struct device *dev, const char *buf,
+	       size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_in_offset(offset)					\
+static ssize_t							\
+	show_in##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{								\
+	return show_in(dev, buf, offset);			\
+}								\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, 		\
+		show_in##offset, NULL);				\
+static ssize_t							\
+	show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{								\
+	return show_in_min(dev, buf, offset);			\
+}								\
+static ssize_t							\
+	show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)	\
+{								\
+	return show_in_max(dev, buf, offset);			\
+}								\
+static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_min(dev, buf, count, offset);		\
+}								\
+static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr,	\
+		const char *buf, size_t count)			\
+{								\
+	return set_in_max(dev, buf, count, offset);		\
+}								\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_min, set_in##offset##_min);	\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,		\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+
+/* Temperature */
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_over = TEMP_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
+}
+
+static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst = TEMP_TO_REG(val);
+	sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+		show_temp_over, set_temp_over);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
+		show_temp_hyst, set_temp_hyst);
+
+/* 2 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])) );
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int reg;
+
+	down(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			DIV_FROM_REG(data->fan_div[nr]));
+	reg = sis5595_read_value(client, SIS5595_REG_FANDIV);
+
+	switch (val) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		dev_err(&client->dev, "fan_div value %ld not "
+			"supported. Choose one of 1, 2, 4 or 8!\n", val);
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+	
+	switch (nr) {
+	case 0:
+		reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
+		break;
+	case 1:
+		reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
+		break;
+	}
+	sis5595_write_value(client, SIS5595_REG_FANDIV, reg);
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+show_fan_offset(1);
+show_fan_offset(2);
+
+static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 0) ;
+}
+
+static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf,
+		size_t count)
+{
+	return set_fan_div(dev, buf, count, 1) ;
+}
+static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+		show_fan_1_div, set_fan_1_div);
+static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
+		show_fan_2_div, set_fan_2_div);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+ 
+/* This is called when the module is loaded */
+static int sis5595_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, sis5595_detect);
+}
+
+int sis5595_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int err = 0;
+	int i;
+	struct i2c_client *new_client;
+	struct sis5595_data *data;
+	char val;
+	u16 a;
+
+	/* Make sure we are probing the ISA bus!!  */
+	if (!i2c_is_isa_adapter(adapter))
+		goto exit;
+
+	if (force_addr)
+		address = force_addr & ~(SIS5595_EXTENT - 1);
+	/* Reserve the ISA region */
+	if (!request_region(address, SIS5595_EXTENT, sis5595_driver.name)) {
+		err = -EBUSY;
+		goto exit;
+	}
+	if (force_addr) {
+		dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address);
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_word(s_bridge, SIS5595_BASE_REG, address))
+			goto exit_release;
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_read_config_word(s_bridge, SIS5595_BASE_REG, &a))
+			goto exit_release;
+		if ((a & ~(SIS5595_EXTENT - 1)) != address)
+			/* doesn't work for some chips? */
+			goto exit_release;
+	}
+
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) {
+		goto exit_release;
+	}
+	if ((val & 0x80) == 0) {
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_byte(s_bridge, SIS5595_ENABLE_REG,
+					  val | 0x80))
+			goto exit_release;
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val))
+			goto exit_release;
+		if ((val & 0x80) == 0) 
+			/* doesn't work for some chips! */
+			goto exit_release;
+	}
+
+	if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+	memset(data, 0, sizeof(struct sis5595_data));
+
+	new_client = &data->client;
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->adapter = adapter;
+	new_client->driver = &sis5595_driver;
+	new_client->flags = 0;
+
+	/* Check revision and pin registers to determine whether 4 or 5 voltages */
+	pci_read_config_byte(s_bridge, SIS5595_REVISION_REG, &(data->revision));
+	/* 4 voltages, 1 temp */
+	data->maxins = 3;
+	if (data->revision >= REV2MIN) {
+		pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val);
+		if (!(val & 0x80))
+			/* 5 voltages, no temps */
+			data->maxins = 4;
+	}
+	
+	/* Fill in the remaining client fields and put it into the global list */
+	strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE);
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+	
+	/* Initialize the SIS5595 chip */
+	sis5595_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 0; i < 2; i++) {
+		data->fan_min[i] = sis5595_read_value(new_client,
+					SIS5595_REG_FAN_MIN(i));
+	}
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	if (data->maxins == 4) {
+		device_create_file(&new_client->dev, &dev_attr_in4_input);
+		device_create_file(&new_client->dev, &dev_attr_in4_min);
+		device_create_file(&new_client->dev, &dev_attr_in4_max);
+	}
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	if (data->maxins == 3) {
+		device_create_file(&new_client->dev, &dev_attr_temp1_input);
+		device_create_file(&new_client->dev, &dev_attr_temp1_max);
+		device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	}
+	return 0;
+	
+exit_free:
+	kfree(data);
+exit_release:
+	release_region(address, SIS5595_EXTENT);
+exit:
+	return err;
+}
+
+static int sis5595_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		    "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if (i2c_is_isa_client(client))
+		release_region(client->addr, SIS5595_EXTENT);
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+
+/* ISA access must be locked explicitly. */
+static int sis5595_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	down(&data->lock);
+	outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
+	res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET);
+	up(&data->lock);
+	return res;
+}
+
+static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	down(&data->lock);
+	outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
+	outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET);
+	up(&data->lock);
+	return 0;
+}
+
+/* Called when we have found a new SIS5595. */
+static void sis5595_init_client(struct i2c_client *client)
+{
+	u8 config = sis5595_read_value(client, SIS5595_REG_CONFIG);
+	if (!(config & 0x01))
+		sis5595_write_value(client, SIS5595_REG_CONFIG,
+				(config & 0xf7) | 0x01);
+}
+
+static struct sis5595_data *sis5595_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sis5595_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		for (i = 0; i <= data->maxins; i++) {
+			data->in[i] =
+			    sis5595_read_value(client, SIS5595_REG_IN(i));
+			data->in_min[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_IN_MIN(i));
+			data->in_max[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_IN_MAX(i));
+		}
+		for (i = 0; i < 2; i++) {
+			data->fan[i] =
+			    sis5595_read_value(client, SIS5595_REG_FAN(i));
+			data->fan_min[i] =
+			    sis5595_read_value(client,
+					       SIS5595_REG_FAN_MIN(i));
+		}
+		if (data->maxins == 3) {
+			data->temp =
+			    sis5595_read_value(client, SIS5595_REG_TEMP);
+			data->temp_over =
+			    sis5595_read_value(client, SIS5595_REG_TEMP_OVER);
+			data->temp_hyst =
+			    sis5595_read_value(client, SIS5595_REG_TEMP_HYST);
+		}
+		i = sis5595_read_value(client, SIS5595_REG_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+		data->alarms =
+		    sis5595_read_value(client, SIS5595_REG_ALARM1) |
+		    (sis5595_read_value(client, SIS5595_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static struct pci_device_id sis5595_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
+
+static int blacklist[] __devinitdata = {
+	PCI_DEVICE_ID_SI_540,
+	PCI_DEVICE_ID_SI_550,
+	PCI_DEVICE_ID_SI_630,
+	PCI_DEVICE_ID_SI_645,
+	PCI_DEVICE_ID_SI_730,
+	PCI_DEVICE_ID_SI_735,
+	PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but
+				  that ID shows up in other chips so we
+				  use the 5511 ID for recognition */
+	PCI_DEVICE_ID_SI_5597,
+	PCI_DEVICE_ID_SI_5598,
+	0 };
+
+static int __devinit sis5595_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *id)
+{
+	u16 val;
+	int *i;
+	int addr = 0;
+
+	for (i = blacklist; *i != 0; i++) {
+		struct pci_dev *dev;
+		dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
+		if (dev) {
+			dev_err(&dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
+			pci_dev_put(dev);
+			return -ENODEV;
+		}
+	}
+	
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_word(dev, SIS5595_BASE_REG, &val))
+		return -ENODEV;
+	
+	addr = val & ~(SIS5595_EXTENT - 1);
+	if (addr == 0 && force_addr == 0) {
+		dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+	if (force_addr)
+		addr = force_addr;	/* so detect will get called */
+
+	if (!addr) {
+		dev_err(&dev->dev,"No SiS 5595 sensors found.\n");
+		return -ENODEV;
+	}
+	normal_isa[0] = addr;
+
+	s_bridge = pci_dev_get(dev);
+	if (i2c_add_driver(&sis5595_driver)) {
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	return -ENODEV;
+}
+
+static struct pci_driver sis5595_pci_driver = {
+	.name            = "sis5595",
+	.id_table        = sis5595_pci_ids,
+	.probe           = sis5595_pci_probe,
+};
+
+static int __init sm_sis5595_init(void)
+{
+	return pci_register_driver(&sis5595_pci_driver);
+}
+
+static void __exit sm_sis5595_exit(void)
+{
+	pci_unregister_driver(&sis5595_pci_driver);
+	if (s_bridge != NULL) {
+		i2c_del_driver(&sis5595_driver);
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+}
+
+MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
+MODULE_DESCRIPTION("SiS 5595 Sensor device");
+MODULE_LICENSE("GPL");
+
+module_init(sm_sis5595_init);
+module_exit(sm_sis5595_exit);
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
new file mode 100644
index 000000000000..251ac2659554
--- /dev/null
+++ b/drivers/hwmon/smsc47b397.c
@@ -0,0 +1,352 @@
+/*
+    smsc47b397.c - Part of lm_sensors, Linux kernel modules
+			for hardware monitoring
+
+    Supports the SMSC LPC47B397-NC Super-I/O chip.
+
+    Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com>
+	Copyright (C) 2004 Utilitek Systems, Inc.
+
+    derived in part from smsc47m1.c:
+	Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+	Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+/* Address is autodetected, there is no default value */
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+static struct i2c_force_data forces[] = {{NULL}};
+
+enum chips { any_chip, smsc47b397 };
+static struct i2c_address_data addr_data = {
+	.normal_i2c		= normal_i2c,
+	.normal_isa		= normal_isa,
+	.probe			= normal_i2c,		/* cheat */
+	.ignore			= normal_i2c,		/* cheat */
+	.forces			= forces,
+};
+
+/* Super-I/0 registers and commands */
+
+#define	REG	0x2e	/* The register to read/write */
+#define	VAL	0x2f	/* The value to read/write */
+
+static inline void superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+/* select superio logical device */
+static inline void superio_select(int ld)
+{
+	superio_outb(0x07, ld);
+}
+
+static inline void superio_enter(void)
+{
+	outb(0x55, REG);
+}
+
+static inline void superio_exit(void)
+{
+	outb(0xAA, REG);
+}
+
+#define SUPERIO_REG_DEVID	0x20
+#define SUPERIO_REG_DEVREV	0x21
+#define SUPERIO_REG_BASE_MSB	0x60
+#define SUPERIO_REG_BASE_LSB	0x61
+#define SUPERIO_REG_LD8		0x08
+
+#define SMSC_EXTENT		0x02
+
+/* 0 <= nr <= 3 */
+static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80};
+#define SMSC47B397_REG_TEMP(nr)	(smsc47b397_reg_temp[(nr)])
+
+/* 0 <= nr <= 3 */
+#define SMSC47B397_REG_FAN_LSB(nr) (0x28 + 2 * (nr))
+#define SMSC47B397_REG_FAN_MSB(nr) (0x29 + 2 * (nr))
+
+struct smsc47b397_data {
+	struct i2c_client client;
+	struct semaphore lock;
+
+	struct semaphore update_lock;
+	unsigned long last_updated; /* in jiffies */
+	int valid;
+
+	/* register values */
+	u16 fan[4];
+	u8 temp[4];
+};
+
+static int smsc47b397_read_value(struct i2c_client *client, u8 reg)
+{
+	struct smsc47b397_data *data = i2c_get_clientdata(client);
+	int res;
+
+	down(&data->lock);
+	outb(reg, client->addr);
+	res = inb_p(client->addr + 1);
+	up(&data->lock);
+	return res;
+}
+
+static struct smsc47b397_data *smsc47b397_update_device(struct device *dev)
+{
+ 	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47b397_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		dev_dbg(&client->dev, "starting device update...\n");
+
+		/* 4 temperature inputs, 4 fan inputs */
+		for (i = 0; i < 4; i++) {
+			data->temp[i] = smsc47b397_read_value(client,
+					SMSC47B397_REG_TEMP(i));
+
+			/* must read LSB first */
+			data->fan[i]  = smsc47b397_read_value(client,
+					SMSC47B397_REG_FAN_LSB(i));
+			data->fan[i] |= smsc47b397_read_value(client,
+					SMSC47B397_REG_FAN_MSB(i)) << 8;
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+
+		dev_dbg(&client->dev, "... device update complete\n");
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static int temp_from_reg(u8 reg)
+{
+	return (s8)reg * 1000;
+}
+
+/* 0 <= nr <= 3 */
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct smsc47b397_data *data = smsc47b397_update_device(dev);
+	return sprintf(buf, "%d\n", temp_from_reg(data->temp[nr]));
+}
+
+#define sysfs_temp(num) \
+static ssize_t show_temp##num(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL)
+
+sysfs_temp(1);
+sysfs_temp(2);
+sysfs_temp(3);
+sysfs_temp(4);
+
+#define device_create_file_temp(client, num) \
+	device_create_file(&client->dev, &dev_attr_temp##num##_input)
+
+/* FAN: 1 RPM/bit
+   REG: count of 90kHz pulses / revolution */
+static int fan_from_reg(u16 reg)
+{
+	return 90000 * 60 / reg;
+}
+
+/* 0 <= nr <= 3 */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+        struct smsc47b397_data *data = smsc47b397_update_device(dev);
+        return sprintf(buf, "%d\n", fan_from_reg(data->fan[nr]));
+}
+
+#define sysfs_fan(num) \
+static ssize_t show_fan##num(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(fan##num##_input, S_IRUGO, show_fan##num, NULL)
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+sysfs_fan(4);
+
+#define device_create_file_fan(client, num) \
+	device_create_file(&client->dev, &dev_attr_fan##num##_input)
+
+static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind);
+
+static int smsc47b397_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, smsc47b397_detect);
+}
+
+static int smsc47b397_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, SMSC_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static struct i2c_driver smsc47b397_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "smsc47b397",
+	.id		= I2C_DRIVERID_SMSC47B397,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= smsc47b397_attach_adapter,
+	.detach_client	= smsc47b397_detach_client,
+};
+
+static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind)
+{
+	struct i2c_client *new_client;
+	struct smsc47b397_data *data;
+	int err = 0;
+
+	if (!i2c_is_isa_adapter(adapter)) {
+		return 0;
+	}
+
+	if (!request_region(addr, SMSC_EXTENT, smsc47b397_driver.name)) {
+		dev_err(&adapter->dev, "Region 0x%x already in use!\n", addr);
+		return -EBUSY;
+	}
+
+	if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto error_release;
+	}
+	memset(data, 0x00, sizeof(struct smsc47b397_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = addr;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &smsc47b397_driver;
+	new_client->flags = 0;
+
+	strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE);
+
+	init_MUTEX(&data->update_lock);
+
+	if ((err = i2c_attach_client(new_client)))
+		goto error_free;
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	device_create_file_temp(new_client, 3);
+	device_create_file_temp(new_client, 4);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan(new_client, 3);
+	device_create_file_fan(new_client, 4);
+
+	return 0;
+
+error_free:
+	kfree(new_client);
+error_release:
+	release_region(addr, SMSC_EXTENT);
+	return err;
+}
+
+static int __init smsc47b397_find(unsigned int *addr)
+{
+	u8 id, rev;
+
+	superio_enter();
+	id = superio_inb(SUPERIO_REG_DEVID);
+
+	if (id != 0x6f) {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	rev = superio_inb(SUPERIO_REG_DEVREV);
+
+	superio_select(SUPERIO_REG_LD8);
+	*addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
+		 |  superio_inb(SUPERIO_REG_BASE_LSB);
+
+	printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC "
+		"(base address 0x%04x, revision %u)\n", *addr, rev);
+
+	superio_exit();
+	return 0;
+}
+
+static int __init smsc47b397_init(void)
+{
+	int ret;
+
+	if ((ret = smsc47b397_find(normal_isa)))
+		return ret;
+
+	return i2c_add_driver(&smsc47b397_driver);
+}
+
+static void __exit smsc47b397_exit(void)
+{
+	i2c_del_driver(&smsc47b397_driver);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("SMSC LPC47B397 driver");
+MODULE_LICENSE("GPL");
+
+module_init(smsc47b397_init);
+module_exit(smsc47b397_exit);
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
new file mode 100644
index 000000000000..897117a7213f
--- /dev/null
+++ b/drivers/hwmon/smsc47m1.c
@@ -0,0 +1,593 @@
+/*
+    smsc47m1.c - Part of lm_sensors, Linux kernel modules
+                 for hardware monitoring
+
+    Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x and LPC47M14x
+    Super-I/O chips.
+
+    Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+    Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+    Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
+                        and Jean Delvare
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+/* Address is autodetected, there is no default value */
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+static struct i2c_force_data forces[] = {{NULL}};
+
+enum chips { any_chip, smsc47m1 };
+static struct i2c_address_data addr_data = {
+	.normal_i2c		= normal_i2c,
+	.normal_isa		= normal_isa,
+	.forces			= forces,
+};
+
+/* Super-I/0 registers and commands */
+
+#define	REG	0x2e	/* The register to read/write */
+#define	VAL	0x2f	/* The value to read/write */
+
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int
+superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+/* logical device for fans is 0x0A */
+#define superio_select() superio_outb(0x07, 0x0A)
+
+static inline void
+superio_enter(void)
+{
+	outb(0x55, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+	outb(0xAA, REG);
+}
+
+#define SUPERIO_REG_ACT		0x30
+#define SUPERIO_REG_BASE	0x60
+#define SUPERIO_REG_DEVID	0x20
+
+/* Logical device registers */
+
+#define SMSC_EXTENT		0x80
+
+/* nr is 0 or 1 in the macros below */
+#define SMSC47M1_REG_ALARM		0x04
+#define SMSC47M1_REG_TPIN(nr)		(0x34 - (nr))
+#define SMSC47M1_REG_PPIN(nr)		(0x36 - (nr))
+#define SMSC47M1_REG_PWM(nr)		(0x56 + (nr))
+#define SMSC47M1_REG_FANDIV		0x58
+#define SMSC47M1_REG_FAN(nr)		(0x59 + (nr))
+#define SMSC47M1_REG_FAN_PRELOAD(nr)	(0x5B + (nr))
+
+#define MIN_FROM_REG(reg,div)		((reg)>=192 ? 0 : \
+					 983040/((192-(reg))*(div)))
+#define FAN_FROM_REG(reg,div,preload)	((reg)<=(preload) || (reg)==255 ? 0 : \
+					 983040/(((reg)-(preload))*(div)))
+#define DIV_FROM_REG(reg)		(1 << (reg))
+#define PWM_FROM_REG(reg)		(((reg) & 0x7E) << 1)
+#define PWM_EN_FROM_REG(reg)		((~(reg)) & 0x01)
+#define PWM_TO_REG(reg)			(((reg) >> 1) & 0x7E)
+
+struct smsc47m1_data {
+	struct i2c_client client;
+	struct semaphore lock;
+
+	struct semaphore update_lock;
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 fan[2];		/* Register value */
+	u8 fan_preload[2];	/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u8 alarms;		/* Register encoding */
+	u8 pwm[2];		/* Register value (bit 7 is enable) */
+};
+
+
+static int smsc47m1_attach_adapter(struct i2c_adapter *adapter);
+static int smsc47m1_find(int *address);
+static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind);
+static int smsc47m1_detach_client(struct i2c_client *client);
+
+static int smsc47m1_read_value(struct i2c_client *client, u8 reg);
+static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value);
+
+static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
+		int init);
+
+
+static struct i2c_driver smsc47m1_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "smsc47m1",
+	.id		= I2C_DRIVERID_SMSC47M1,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= smsc47m1_attach_adapter,
+	.detach_client	= smsc47m1_detach_client,
+};
+
+/* nr is 0 or 1 in the callback functions below */
+
+static ssize_t get_fan(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	/* This chip (stupidly) stops monitoring fan speed if PWM is
+	   enabled and duty cycle is 0%. This is fine if the monitoring
+	   and control concern the same fan, but troublesome if they are
+	   not (which could as well happen). */
+	int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
+		  FAN_FROM_REG(data->fan[nr],
+			       DIV_FROM_REG(data->fan_div[nr]),
+			       data->fan_preload[nr]);
+	return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t get_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	int rpm = MIN_FROM_REG(data->fan_preload[nr],
+			       DIV_FROM_REG(data->fan_div[nr]));
+	return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t get_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t get_pwm(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
+}
+
+static ssize_t get_pwm_en(struct device *dev, char *buf, int nr)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr]));
+}
+
+static ssize_t get_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+	long rpmdiv, val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
+
+	if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
+	smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
+			     data->fan_preload[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan clock divider.  This follows the principle
+   of least suprise; the user doesn't expect the fan minimum to change just
+   because the divider changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+
+	long new_div = simple_strtol(buf, NULL, 10), tmp;
+	u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
+
+	if (new_div == old_div) /* No change */
+		return count;
+
+	down(&data->update_lock);
+	switch (new_div) {
+	case 1: data->fan_div[nr] = 0; break;
+	case 2: data->fan_div[nr] = 1; break;
+	case 4: data->fan_div[nr] = 2; break;
+	case 8: data->fan_div[nr] = 3; break;
+	default:
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F;
+	tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6);
+	smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
+
+	/* Preserve fan min */
+	tmp = 192 - (old_div * (192 - data->fan_preload[nr])
+		     + new_div / 2) / new_div;
+	data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
+	smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
+			     data->fan_preload[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_pwm(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+
+	long val = simple_strtol(buf, NULL, 10);
+
+	if (val < 0 || val > 255)
+		return -EINVAL;
+
+	down(&data->update_lock);
+	data->pwm[nr] &= 0x81; /* Preserve additional bits */
+	data->pwm[nr] |= PWM_TO_REG(val);
+	smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
+			     data->pwm[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_pwm_en(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+
+	long val = simple_strtol(buf, NULL, 10);
+	
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	down(&data->update_lock);
+	data->pwm[nr] &= 0xFE; /* preserve the other bits */
+	data->pwm[nr] |= !val;
+	smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
+			     data->pwm[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define fan_present(offset)						\
+static ssize_t get_fan##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	return get_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t get_fan##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return get_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan##offset##_min (struct device *dev, struct device_attribute *attr,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t get_fan##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return get_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan##offset##_div (struct device *dev, struct device_attribute *attr,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_fan_div(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t get_pwm##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	return get_pwm(dev, buf, offset - 1);				\
+}									\
+static ssize_t set_pwm##offset (struct device *dev, struct device_attribute *attr,			\
+		const char *buf, size_t count)				\
+{									\
+	return set_pwm(dev, buf, count, offset - 1);			\
+}									\
+static ssize_t get_pwm##offset##_en (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return get_pwm_en(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_pwm##offset##_en (struct device *dev, struct device_attribute *attr,		\
+		const char *buf, size_t count)				\
+{									\
+	return set_pwm_en(dev, buf, count, offset - 1);			\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset,	\
+		NULL);							\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		get_fan##offset##_min, set_fan##offset##_min);		\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,		\
+		get_fan##offset##_div, set_fan##offset##_div);		\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,			\
+		get_pwm##offset, set_pwm##offset);			\
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,		\
+		get_pwm##offset##_en, set_pwm##offset##_en);
+
+fan_present(1);
+fan_present(2);
+
+static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
+
+static int smsc47m1_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, smsc47m1_detect);
+}
+
+static int smsc47m1_find(int *address)
+{
+	u8 val;
+
+	superio_enter();
+	val = superio_inb(SUPERIO_REG_DEVID);
+
+	/*
+	 * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
+	 * 0x5F) and LPC47B27x (device id 0x51) have fan control.
+	 * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
+	 * can do much more besides (device id 0x60).
+	 */
+	if (val == 0x51)
+		printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
+	else if (val == 0x59)
+		printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n");
+	else if (val == 0x5F)
+		printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
+	else if (val == 0x60)
+		printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n");
+	else {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	superio_select();
+	*address = (superio_inb(SUPERIO_REG_BASE) << 8)
+		 |  superio_inb(SUPERIO_REG_BASE + 1);
+	val = superio_inb(SUPERIO_REG_ACT);
+	if (*address == 0 || (val & 0x01) == 0) {
+		printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n");
+		superio_exit();
+		return -ENODEV;
+	}
+
+	superio_exit();
+	return 0;
+}
+
+static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct smsc47m1_data *data;
+	int err = 0;
+	int fan1, fan2, pwm1, pwm2;
+
+	if (!i2c_is_isa_adapter(adapter)) {
+		return 0;
+	}
+
+	if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) {
+		dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
+		return -EBUSY;
+	}
+
+	if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto error_release;
+	}
+	memset(data, 0x00, sizeof(struct smsc47m1_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &smsc47m1_driver;
+	new_client->flags = 0;
+
+	strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
+	init_MUTEX(&data->update_lock);
+
+	/* If no function is properly configured, there's no point in
+	   actually registering the chip. */
+	fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05)
+	       == 0x05;
+	fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05)
+	       == 0x05;
+	pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05)
+	       == 0x04;
+	pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05)
+	       == 0x04;
+	if (!(fan1 || fan2 || pwm1 || pwm2)) {
+		dev_warn(&new_client->dev, "Device is not configured, will not use\n");
+		err = -ENODEV;
+		goto error_free;
+	}
+
+	if ((err = i2c_attach_client(new_client)))
+		goto error_free;
+
+	/* Some values (fan min, clock dividers, pwm registers) may be
+	   needed before any update is triggered, so we better read them
+	   at least once here. We don't usually do it that way, but in
+	   this particular case, manually reading 5 registers out of 8
+	   doesn't make much sense and we're better using the existing
+	   function. */
+	smsc47m1_update_device(&new_client->dev, 1);
+
+	if (fan1) {
+		device_create_file(&new_client->dev, &dev_attr_fan1_input);
+		device_create_file(&new_client->dev, &dev_attr_fan1_min);
+		device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	} else
+		dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, "
+			"skipping\n");
+
+	if (fan2) {
+		device_create_file(&new_client->dev, &dev_attr_fan2_input);
+		device_create_file(&new_client->dev, &dev_attr_fan2_min);
+		device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	} else
+		dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, "
+			"skipping\n");
+
+	if (pwm1) {
+		device_create_file(&new_client->dev, &dev_attr_pwm1);
+		device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	} else
+		dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, "
+			"skipping\n");
+	if (pwm2) {
+		device_create_file(&new_client->dev, &dev_attr_pwm2);
+		device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+	} else
+		dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, "
+			"skipping\n");
+
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+error_free:
+	kfree(new_client);
+error_release:
+	release_region(address, SMSC_EXTENT);
+	return err;
+}
+
+static int smsc47m1_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, SMSC_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static int smsc47m1_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	res = inb_p(client->addr + reg);
+	up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	return res;
+}
+
+static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+	outb_p(value, client->addr + reg);
+	up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+}
+
+static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
+		int init)
+{
+ 	struct i2c_client *client = to_i2c_client(dev);
+	struct smsc47m1_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
+		int i;
+
+		for (i = 0; i < 2; i++) {
+			data->fan[i] = smsc47m1_read_value(client,
+				       SMSC47M1_REG_FAN(i));
+			data->fan_preload[i] = smsc47m1_read_value(client,
+					       SMSC47M1_REG_FAN_PRELOAD(i));
+			data->pwm[i] = smsc47m1_read_value(client,
+				       SMSC47M1_REG_PWM(i));
+		}
+
+		i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+
+		data->alarms = smsc47m1_read_value(client,
+			       SMSC47M1_REG_ALARM) >> 6;
+		/* Clear alarms if needed */
+		if (data->alarms)
+			smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0);
+
+		data->last_updated = jiffies;
+	}
+
+	up(&data->update_lock);
+	return data;
+}
+
+static int __init sm_smsc47m1_init(void)
+{
+	if (smsc47m1_find(normal_isa)) {
+		return -ENODEV;
+	}
+
+	return i2c_add_driver(&smsc47m1_driver);
+}
+
+static void __exit sm_smsc47m1_exit(void)
+{
+	i2c_del_driver(&smsc47m1_driver);
+}
+
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
+MODULE_LICENSE("GPL");
+
+module_init(sm_smsc47m1_init);
+module_exit(sm_smsc47m1_exit);
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
new file mode 100644
index 000000000000..164d47948390
--- /dev/null
+++ b/drivers/hwmon/via686a.c
@@ -0,0 +1,875 @@
+/*
+    via686a.c - Part of lm_sensors, Linux kernel modules
+		for hardware monitoring
+
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
+			Kyösti Mälkki <kmalkki@cc.hut.fi>,
+			Mark Studebaker <mdsxyz123@yahoo.com>,
+			and Bob Dougherty <bobd@stanford.edu>
+    (Some conversion-factor data were contributed by Jonathan Teh Soon Yew
+    <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    Supports the Via VT82C686A, VT82C686B south bridges.
+    Reports all as a 686A.
+    Warning - only supports a single device.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the device at the given address. */
+static unsigned short force_addr = 0;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+
+/* Addresses to scan.
+   Note that we can't determine the ISA address until we have initialized
+   our module */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(via686a);
+
+/*
+   The Via 686a southbridge has a LM78-like chip integrated on the same IC.
+   This driver is a customized copy of lm78.c
+*/
+
+/* Many VIA686A constants specified below */
+
+/* Length of ISA address segment */
+#define VIA686A_EXTENT		0x80
+#define VIA686A_BASE_REG	0x70
+#define VIA686A_ENABLE_REG	0x74
+
+/* The VIA686A registers */
+/* ins numbered 0-4 */
+#define VIA686A_REG_IN_MAX(nr)	(0x2b + ((nr) * 2))
+#define VIA686A_REG_IN_MIN(nr)	(0x2c + ((nr) * 2))
+#define VIA686A_REG_IN(nr)	(0x22 + (nr))
+
+/* fans numbered 1-2 */
+#define VIA686A_REG_FAN_MIN(nr)	(0x3a + (nr))
+#define VIA686A_REG_FAN(nr)	(0x28 + (nr))
+
+/* temps numbered 1-3 */
+static const u8 VIA686A_REG_TEMP[]	= { 0x20, 0x21, 0x1f };
+static const u8 VIA686A_REG_TEMP_OVER[]	= { 0x39, 0x3d, 0x1d };
+static const u8 VIA686A_REG_TEMP_HYST[]	= { 0x3a, 0x3e, 0x1e };
+/* bits 7-6 */
+#define VIA686A_REG_TEMP_LOW1	0x4b
+/* 2 = bits 5-4, 3 = bits 7-6 */
+#define VIA686A_REG_TEMP_LOW23	0x49
+
+#define VIA686A_REG_ALARM1	0x41
+#define VIA686A_REG_ALARM2	0x42
+#define VIA686A_REG_FANDIV	0x47
+#define VIA686A_REG_CONFIG	0x40
+/* The following register sets temp interrupt mode (bits 1-0 for temp1,
+ 3-2 for temp2, 5-4 for temp3).  Modes are:
+    00 interrupt stays as long as value is out-of-range
+    01 interrupt is cleared once register is read (default)
+    10 comparator mode- like 00, but ignores hysteresis
+    11 same as 00 */
+#define VIA686A_REG_TEMP_MODE		0x4b
+/* We'll just assume that you want to set all 3 simultaneously: */
+#define VIA686A_TEMP_MODE_MASK		0x3F
+#define VIA686A_TEMP_MODE_CONTINUOUS	0x00
+
+/* Conversions. Limit checking is only done on the TO_REG
+   variants.
+
+********* VOLTAGE CONVERSIONS (Bob Dougherty) ********
+ From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew):
+ voltagefactor[0]=1.25/2628; (2628/1.25=2102.4)   // Vccp
+ voltagefactor[1]=1.25/2628; (2628/1.25=2102.4)   // +2.5V
+ voltagefactor[2]=1.67/2628; (2628/1.67=1573.7)   // +3.3V
+ voltagefactor[3]=2.6/2628;  (2628/2.60=1010.8)   // +5V
+ voltagefactor[4]=6.3/2628;  (2628/6.30=417.14)   // +12V
+ in[i]=(data[i+2]*25.0+133)*voltagefactor[i];
+ That is:
+ volts = (25*regVal+133)*factor
+ regVal = (volts/factor-133)/25
+ (These conversions were contributed by Jonathan Teh Soon Yew
+ <j.teh@iname.com>) */
+static inline u8 IN_TO_REG(long val, int inNum)
+{
+	/* To avoid floating point, we multiply constants by 10 (100 for +12V).
+	   Rounding is done (120500 is actually 133000 - 12500).
+	   Remember that val is expressed in 0.001V/bit, which is why we divide
+	   by an additional 10000 (100000 for +12V): 1000 for val and 10 (100)
+	   for the constants. */
+	if (inNum <= 1)
+		return (u8)
+		    SENSORS_LIMIT((val * 21024 - 1205000) / 250000, 0, 255);
+	else if (inNum == 2)
+		return (u8)
+		    SENSORS_LIMIT((val * 15737 - 1205000) / 250000, 0, 255);
+	else if (inNum == 3)
+		return (u8)
+		    SENSORS_LIMIT((val * 10108 - 1205000) / 250000, 0, 255);
+	else
+		return (u8)
+		    SENSORS_LIMIT((val * 41714 - 12050000) / 2500000, 0, 255);
+}
+
+static inline long IN_FROM_REG(u8 val, int inNum)
+{
+	/* To avoid floating point, we multiply constants by 10 (100 for +12V).
+	   We also multiply them by 1000 because we want 0.001V/bit for the
+	   output value. Rounding is done. */
+	if (inNum <= 1)
+		return (long) ((250000 * val + 1330000 + 21024 / 2) / 21024);
+	else if (inNum == 2)
+		return (long) ((250000 * val + 1330000 + 15737 / 2) / 15737);
+	else if (inNum == 3)
+		return (long) ((250000 * val + 1330000 + 10108 / 2) / 10108);
+	else
+		return (long) ((2500000 * val + 13300000 + 41714 / 2) / 41714);
+}
+
+/********* FAN RPM CONVERSIONS ********/
+/* Higher register values = slower fans (the fan's strobe gates a counter).
+ But this chip saturates back at 0, not at 255 like all the other chips.
+ So, 0 means 0 RPM */
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 0;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?0:(val)==255?0:1350000/((val)*(div)))
+
+/******** TEMP CONVERSIONS (Bob Dougherty) *********/
+/* linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew)
+      if(temp<169)
+	      return double(temp)*0.427-32.08;
+      else if(temp>=169 && temp<=202)
+	      return double(temp)*0.582-58.16;
+      else
+	      return double(temp)*0.924-127.33;
+
+ A fifth-order polynomial fits the unofficial data (provided by Alex van
+ Kaam <darkside@chello.nl>) a bit better.  It also give more reasonable
+ numbers on my machine (ie. they agree with what my BIOS tells me).
+ Here's the fifth-order fit to the 8-bit data:
+ temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 -
+	2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0.
+
+ (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for
+ finding my typos in this formula!)
+
+ Alas, none of the elegant function-fit solutions will work because we
+ aren't allowed to use floating point in the kernel and doing it with
+ integers doesn't provide enough precision.  So we'll do boring old
+ look-up table stuff.  The unofficial data (see below) have effectively
+ 7-bit resolution (they are rounded to the nearest degree).  I'm assuming
+ that the transfer function of the device is monotonic and smooth, so a
+ smooth function fit to the data will allow us to get better precision.
+ I used the 5th-order poly fit described above and solved for
+ VIA register values 0-255.  I *10 before rounding, so we get tenth-degree
+ precision.  (I could have done all 1024 values for our 10-bit readings,
+ but the function is very linear in the useful range (0-80 deg C), so
+ we'll just use linear interpolation for 10-bit readings.)  So, tempLUT
+ is the temp at via register values 0-255: */
+static const long tempLUT[] =
+{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
+	-503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
+	-362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
+	-255, -246, -237, -229, -220, -212, -204, -196, -188, -180,
+	-173, -166, -159, -152, -145, -139, -132, -126, -120, -114,
+	-108, -102, -96, -91, -85, -80, -74, -69, -64, -59, -54, -49,
+	-44, -39, -34, -29, -25, -20, -15, -11, -6, -2, 3, 7, 12, 16,
+	20, 25, 29, 33, 37, 42, 46, 50, 54, 59, 63, 67, 71, 75, 79, 84,
+	88, 92, 96, 100, 104, 109, 113, 117, 121, 125, 130, 134, 138,
+	142, 146, 151, 155, 159, 163, 168, 172, 176, 181, 185, 189,
+	193, 198, 202, 206, 211, 215, 219, 224, 228, 232, 237, 241,
+	245, 250, 254, 259, 263, 267, 272, 276, 281, 285, 290, 294,
+	299, 303, 307, 312, 316, 321, 325, 330, 334, 339, 344, 348,
+	353, 357, 362, 366, 371, 376, 380, 385, 390, 395, 399, 404,
+	409, 414, 419, 423, 428, 433, 438, 443, 449, 454, 459, 464,
+	469, 475, 480, 486, 491, 497, 502, 508, 514, 520, 526, 532,
+	538, 544, 551, 557, 564, 571, 578, 584, 592, 599, 606, 614,
+	621, 629, 637, 645, 654, 662, 671, 680, 689, 698, 708, 718,
+	728, 738, 749, 759, 770, 782, 793, 805, 818, 830, 843, 856,
+	870, 883, 898, 912, 927, 943, 958, 975, 991, 1008, 1026, 1044,
+	1062, 1081, 1101, 1121, 1141, 1162, 1184, 1206, 1229, 1252,
+	1276, 1301, 1326, 1352, 1378, 1406, 1434, 1462
+};
+
+/* the original LUT values from Alex van Kaam <darkside@chello.nl>
+   (for via register values 12-240):
+{-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31,
+-30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15,
+-15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3,
+-3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12,
+12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22,
+22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33,
+33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45,
+45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60,
+61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84,
+85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110};
+
+
+ Here's the reverse LUT.  I got it by doing a 6-th order poly fit (needed
+ an extra term for a good fit to these inverse data!) and then
+ solving for each temp value from -50 to 110 (the useable range for
+ this chip).  Here's the fit:
+ viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4
+ - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01)
+ Note that n=161: */
+static const u8 viaLUT[] =
+{ 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23,
+	23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40,
+	41, 43, 45, 46, 48, 49, 51, 53, 55, 57, 59, 60, 62, 64, 66,
+	69, 71, 73, 75, 77, 79, 82, 84, 86, 88, 91, 93, 95, 98, 100,
+	103, 105, 107, 110, 112, 115, 117, 119, 122, 124, 126, 129,
+	131, 134, 136, 138, 140, 143, 145, 147, 150, 152, 154, 156,
+	158, 160, 162, 164, 166, 168, 170, 172, 174, 176, 178, 180,
+	182, 183, 185, 187, 188, 190, 192, 193, 195, 196, 198, 199,
+	200, 202, 203, 205, 206, 207, 208, 209, 210, 211, 212, 213,
+	214, 215, 216, 217, 218, 219, 220, 221, 222, 222, 223, 224,
+	225, 226, 226, 227, 228, 228, 229, 230, 230, 231, 232, 232,
+	233, 233, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
+	239, 240
+};
+
+/* Converting temps to (8-bit) hyst and over registers
+   No interpolation here.
+   The +50 is because the temps start at -50 */
+static inline u8 TEMP_TO_REG(long val)
+{
+	return viaLUT[val <= -50000 ? 0 : val >= 110000 ? 160 :
+		      (val < 0 ? val - 500 : val + 500) / 1000 + 50];
+}
+
+/* for 8-bit temperature hyst and over registers */
+#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100)
+
+/* for 10-bit temperature readings */
+static inline long TEMP_FROM_REG10(u16 val)
+{
+	u16 eightBits = val >> 2;
+	u16 twoBits = val & 3;
+
+	/* no interpolation for these */
+	if (twoBits == 0 || eightBits == 255)
+		return TEMP_FROM_REG(eightBits);
+
+	/* do some linear interpolation */
+	return (tempLUT[eightBits] * (4 - twoBits) +
+		tempLUT[eightBits + 1] * twoBits) * 25;
+}
+
+#define DIV_FROM_REG(val) (1 << (val))
+#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
+
+/* For the VIA686A, we need to keep some data in memory.
+   The structure is dynamically allocated, at the same time when a new
+   via686a client is allocated. */
+struct via686a_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u8 in[5];		/* Register value */
+	u8 in_max[5];		/* Register value */
+	u8 in_min[5];		/* Register value */
+	u8 fan[2];		/* Register value */
+	u8 fan_min[2];		/* Register value */
+	u16 temp[3];		/* Register value 10 bit */
+	u8 temp_over[3];	/* Register value */
+	u8 temp_hyst[3];	/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+static struct pci_dev *s_bridge;	/* pointer to the (only) via686a */
+
+static int via686a_attach_adapter(struct i2c_adapter *adapter);
+static int via686a_detect(struct i2c_adapter *adapter, int address, int kind);
+static int via686a_detach_client(struct i2c_client *client);
+
+static inline int via686a_read_value(struct i2c_client *client, u8 reg)
+{
+	return (inb_p(client->addr + reg));
+}
+
+static inline void via686a_write_value(struct i2c_client *client, u8 reg,
+				       u8 value)
+{
+	outb_p(value, client->addr + reg);
+}
+
+static struct via686a_data *via686a_update_device(struct device *dev);
+static void via686a_init_client(struct i2c_client *client);
+
+/* following are the sysfs callback functions */
+
+/* 7 voltage sensors */
+static ssize_t show_in(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr));
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr));
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr));
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf,
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val, nr);
+	via686a_write_value(client, VIA686A_REG_IN_MIN(nr),
+			data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_in_max(struct device *dev, const char *buf,
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val, nr);
+	via686a_write_value(client, VIA686A_REG_IN_MAX(nr),
+			data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_in_offset(offset)					\
+static ssize_t 							\
+	show_in##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{								\
+	return show_in(dev, buf, offset);			\
+}								\
+static ssize_t 							\
+	show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{								\
+	return show_in_min(dev, buf, offset);		\
+}								\
+static ssize_t 							\
+	show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)	\
+{								\
+	return show_in_max(dev, buf, offset);		\
+}								\
+static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, 	\
+		const char *buf, size_t count) 			\
+{								\
+	return set_in_min(dev, buf, count, offset);		\
+}								\
+static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr,	\
+			const char *buf, size_t count)		\
+{								\
+	return set_in_max(dev, buf, count, offset);		\
+}								\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, 	\
+		show_in##offset##_min, set_in##offset##_min);	\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, 	\
+		show_in##offset##_max, set_in##offset##_max);
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+
+/* 3 temperatures */
+static ssize_t show_temp(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr]));
+}
+static ssize_t show_temp_over(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr]));
+}
+static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr]));
+}
+static ssize_t set_temp_over(struct device *dev, const char *buf,
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_over[nr] = TEMP_TO_REG(val);
+	via686a_write_value(client, VIA686A_REG_TEMP_OVER[nr],
+			    data->temp_over[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_temp_hyst(struct device *dev, const char *buf,
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst[nr] = TEMP_TO_REG(val);
+	via686a_write_value(client, VIA686A_REG_TEMP_HYST[nr],
+			    data->temp_hyst[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_temp_offset(offset)					\
+static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_temp(dev, buf, offset - 1);				\
+}									\
+static ssize_t								\
+show_temp_##offset##_over (struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	return show_temp_over(dev, buf, offset - 1);			\
+}									\
+static ssize_t								\
+show_temp_##offset##_hyst (struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	return show_temp_hyst(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_temp_##offset##_over (struct device *dev, struct device_attribute *attr, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_temp_over(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_temp_##offset##_hyst (struct device *dev, struct device_attribute *attr, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_temp_hyst(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL);\
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_over, set_temp_##offset##_over);	\
+static DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_hyst, set_temp_##offset##_hyst);
+
+show_temp_offset(1);
+show_temp_offset(2);
+show_temp_offset(3);
+
+/* 2 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+				DIV_FROM_REG(data->fan_div[nr])) );
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%d\n",
+		FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) );
+}
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+		size_t count, int nr) {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	int old;
+
+	down(&data->update_lock);
+	old = via686a_read_value(client, VIA686A_REG_FANDIV);
+	data->fan_div[nr] = DIV_TO_REG(val);
+	old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
+	via686a_write_value(client, VIA686A_REG_FANDIV, old);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr, 		\
+		const char *buf, size_t count) 				\
+{									\
+	return set_fan_div(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_min, set_fan_##offset##_min);	\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_div, set_fan_##offset##_div);
+
+show_fan_offset(1);
+show_fan_offset(2);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) {
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/* The driver. I choose to use type i2c_driver, as at is identical to both
+   smbus_driver and isa_driver, and clients could be of either kind */
+static struct i2c_driver via686a_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "via686a",
+	.id		= I2C_DRIVERID_VIA686A,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= via686a_attach_adapter,
+	.detach_client	= via686a_detach_client,
+};
+
+
+/* This is called when the module is loaded */
+static int via686a_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, via686a_detect);
+}
+
+static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct via686a_data *data;
+	int err = 0;
+	const char client_name[] = "via686a";
+	u16 val;
+
+	/* Make sure we are probing the ISA bus!!  */
+	if (!i2c_is_isa_adapter(adapter)) {
+		dev_err(&adapter->dev,
+		"via686a_detect called for an I2C bus adapter?!?\n");
+		return 0;
+	}
+
+	/* 8231 requires multiple of 256, we enforce that on 686 as well */
+	if (force_addr)
+		address = force_addr & 0xFF00;
+
+	if (force_addr) {
+		dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
+			 address);
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_word(s_bridge, VIA686A_BASE_REG, address))
+			return -ENODEV;
+	}
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
+		return -ENODEV;
+	if (!(val & 0x0001)) {
+		dev_warn(&adapter->dev, "enabling sensors\n");
+		if (PCIBIOS_SUCCESSFUL !=
+		    pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
+					  val | 0x0001))
+			return -ENODEV;
+	}
+
+	/* Reserve the ISA region */
+	if (!request_region(address, VIA686A_EXTENT, via686a_driver.name)) {
+		dev_err(&adapter->dev, "region 0x%x already in use!\n",
+			address);
+		return -ENODEV;
+	}
+
+	if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+	memset(data, 0, sizeof(struct via686a_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &via686a_driver;
+	new_client->flags = 0;
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR3;
+
+	/* Initialize the VIA686A chip */
+	via686a_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max_hyst);
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan2_div);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+ERROR3:
+	kfree(data);
+ERROR0:
+	release_region(address, VIA686A_EXTENT);
+	return err;
+}
+
+static int via686a_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		"Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, VIA686A_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+/* Called when we have found a new VIA686A. Set limits, etc. */
+static void via686a_init_client(struct i2c_client *client)
+{
+	u8 reg;
+
+	/* Start monitoring */
+	reg = via686a_read_value(client, VIA686A_REG_CONFIG);
+	via686a_write_value(client, VIA686A_REG_CONFIG, (reg|0x01)&0x7F);
+
+	/* Configure temp interrupt mode for continuous-interrupt operation */
+	via686a_write_value(client, VIA686A_REG_TEMP_MODE,
+			    via686a_read_value(client, VIA686A_REG_TEMP_MODE) &
+			    !(VIA686A_TEMP_MODE_MASK | VIA686A_TEMP_MODE_CONTINUOUS));
+}
+
+static struct via686a_data *via686a_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct via686a_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		for (i = 0; i <= 4; i++) {
+			data->in[i] =
+			    via686a_read_value(client, VIA686A_REG_IN(i));
+			data->in_min[i] = via686a_read_value(client,
+							     VIA686A_REG_IN_MIN
+							     (i));
+			data->in_max[i] =
+			    via686a_read_value(client, VIA686A_REG_IN_MAX(i));
+		}
+		for (i = 1; i <= 2; i++) {
+			data->fan[i - 1] =
+			    via686a_read_value(client, VIA686A_REG_FAN(i));
+			data->fan_min[i - 1] = via686a_read_value(client,
+						     VIA686A_REG_FAN_MIN(i));
+		}
+		for (i = 0; i <= 2; i++) {
+			data->temp[i] = via686a_read_value(client,
+						 VIA686A_REG_TEMP[i]) << 2;
+			data->temp_over[i] =
+			    via686a_read_value(client,
+					       VIA686A_REG_TEMP_OVER[i]);
+			data->temp_hyst[i] =
+			    via686a_read_value(client,
+					       VIA686A_REG_TEMP_HYST[i]);
+		}
+		/* add in lower 2 bits
+		   temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
+		   temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
+		   temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
+		 */
+		data->temp[0] |= (via686a_read_value(client,
+						     VIA686A_REG_TEMP_LOW1)
+				  & 0xc0) >> 6;
+		data->temp[1] |=
+		    (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
+		     0x30) >> 4;
+		data->temp[2] |=
+		    (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) &
+		     0xc0) >> 6;
+
+		i = via686a_read_value(client, VIA686A_REG_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+		data->alarms =
+		    via686a_read_value(client,
+				       VIA686A_REG_ALARM1) |
+		    (via686a_read_value(client, VIA686A_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static struct pci_device_id via686a_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, via686a_pci_ids);
+
+static int __devinit via686a_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *id)
+{
+	u16 val;
+	int addr = 0;
+
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_word(dev, VIA686A_BASE_REG, &val))
+		return -ENODEV;
+
+	addr = val & ~(VIA686A_EXTENT - 1);
+	if (addr == 0 && force_addr == 0) {
+		dev_err(&dev->dev, "base address not set - upgrade BIOS "
+			"or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+	if (force_addr)
+		addr = force_addr;	/* so detect will get called */
+
+	if (!addr) {
+		dev_err(&dev->dev, "No Via 686A sensors found.\n");
+		return -ENODEV;
+	}
+	normal_isa[0] = addr;
+
+	s_bridge = pci_dev_get(dev);
+	if (i2c_add_driver(&via686a_driver)) {
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	return -ENODEV;
+}
+
+static struct pci_driver via686a_pci_driver = {
+	.name		= "via686a",
+	.id_table	= via686a_pci_ids,
+	.probe		= via686a_pci_probe,
+};
+
+static int __init sm_via686a_init(void)
+{
+	return pci_register_driver(&via686a_pci_driver);
+}
+
+static void __exit sm_via686a_exit(void)
+{
+	pci_unregister_driver(&via686a_pci_driver);
+	if (s_bridge != NULL) {
+		i2c_del_driver(&via686a_driver);
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+}
+
+MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>, "
+	      "Mark Studebaker <mdsxyz123@yahoo.com> "
+	      "and Bob Dougherty <bobd@stanford.edu>");
+MODULE_DESCRIPTION("VIA 686A Sensor device");
+MODULE_LICENSE("GPL");
+
+module_init(sm_via686a_init);
+module_exit(sm_via686a_exit);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
new file mode 100644
index 000000000000..8a40b6976e1a
--- /dev/null
+++ b/drivers/hwmon/w83627ehf.c
@@ -0,0 +1,846 @@
+/*
+    w83627ehf - Driver for the hardware monitoring functionality of
+                the Winbond W83627EHF Super-I/O chip
+    Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
+
+    Shamelessly ripped from the w83627hf driver
+    Copyright (C) 2003  Mark Studebaker
+
+    Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help
+    in testing and debugging this driver.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+    Supports the following chips:
+
+    Chip        #vin    #fan    #pwm    #temp   chip_id man_id
+    w83627ehf   -       5       -       3       0x88    0x5ca3
+
+    This is a preliminary version of the driver, only supporting the
+    fan and temperature inputs. The chip does much more than that.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+/* Addresses to scan
+   The actual ISA address is read from Super-I/O configuration space */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(w83627ehf);
+
+/*
+ * Super-I/O constants and functions
+ */
+
+static int REG;		/* The register to read/write */
+static int VAL;		/* The value to read/write */
+
+#define W83627EHF_LD_HWM	0x0b
+
+#define SIO_REG_LDSEL		0x07	/* Logical device select */
+#define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
+#define SIO_REG_ENABLE		0x30	/* Logical device enable */
+#define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
+
+#define SIO_W83627EHF_ID	0x8840
+#define SIO_ID_MASK		0xFFC0
+
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int
+superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static inline void
+superio_select(int ld)
+{
+	outb(SIO_REG_LDSEL, REG);
+	outb(ld, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+	outb(0x87, REG);
+	outb(0x87, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+	outb(0x02, REG);
+	outb(0x02, VAL);
+}
+
+/*
+ * ISA constants
+ */
+
+#define REGION_LENGTH		8
+#define ADDR_REG_OFFSET		5
+#define DATA_REG_OFFSET		6
+
+#define W83627EHF_REG_BANK		0x4E
+#define W83627EHF_REG_CONFIG		0x40
+#define W83627EHF_REG_CHIP_ID		0x49
+#define W83627EHF_REG_MAN_ID		0x4F
+
+static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 };
+static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };
+
+#define W83627EHF_REG_TEMP1		0x27
+#define W83627EHF_REG_TEMP1_HYST	0x3a
+#define W83627EHF_REG_TEMP1_OVER	0x39
+static const u16 W83627EHF_REG_TEMP[] = { 0x150, 0x250 };
+static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x153, 0x253 };
+static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x155, 0x255 };
+static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 };
+
+/* Fan clock dividers are spread over the following five registers */
+#define W83627EHF_REG_FANDIV1		0x47
+#define W83627EHF_REG_FANDIV2		0x4B
+#define W83627EHF_REG_VBAT		0x5D
+#define W83627EHF_REG_DIODE		0x59
+#define W83627EHF_REG_SMI_OVT		0x4C
+
+/*
+ * Conversions
+ */
+
+static inline unsigned int
+fan_from_reg(u8 reg, unsigned int div)
+{
+	if (reg == 0 || reg == 255)
+		return 0;
+	return 1350000U / (reg * div);
+}
+
+static inline unsigned int
+div_from_reg(u8 reg)
+{
+	return 1 << reg;
+}
+
+static inline int
+temp1_from_reg(s8 reg)
+{
+	return reg * 1000;
+}
+
+static inline s8
+temp1_to_reg(int temp)
+{
+	if (temp <= -128000)
+		return -128;
+	if (temp >= 127000)
+		return 127;
+	if (temp < 0)
+		return (temp - 500) / 1000;
+	return (temp + 500) / 1000;
+}
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct w83627ehf_data {
+	struct i2c_client client;
+	struct semaphore lock;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	/* Register values */
+	u8 fan[5];
+	u8 fan_min[5];
+	u8 fan_div[5];
+	u8 has_fan;		/* some fan inputs can be disabled */
+	s8 temp1;
+	s8 temp1_max;
+	s8 temp1_max_hyst;
+	s16 temp[2];
+	s16 temp_max[2];
+	s16 temp_max_hyst[2];
+};
+
+static inline int is_word_sized(u16 reg)
+{
+	return (((reg & 0xff00) == 0x100
+	      || (reg & 0xff00) == 0x200)
+	     && ((reg & 0x00ff) == 0x50
+	      || (reg & 0x00ff) == 0x53
+	      || (reg & 0x00ff) == 0x55));
+}
+
+/* We assume that the default bank is 0, thus the following two functions do
+   nothing for registers which live in bank 0. For others, they respectively
+   set the bank register to the correct value (before the register is
+   accessed), and back to 0 (afterwards). */
+static inline void w83627ehf_set_bank(struct i2c_client *client, u16 reg)
+{
+	if (reg & 0xff00) {
+		outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET);
+		outb_p(reg >> 8, client->addr + DATA_REG_OFFSET);
+	}
+}
+
+static inline void w83627ehf_reset_bank(struct i2c_client *client, u16 reg)
+{
+	if (reg & 0xff00) {
+		outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET);
+		outb_p(0, client->addr + DATA_REG_OFFSET);
+	}
+}
+
+static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg)
+{
+	struct w83627ehf_data *data = i2c_get_clientdata(client);
+	int res, word_sized = is_word_sized(reg);
+
+	down(&data->lock);
+
+	w83627ehf_set_bank(client, reg);
+	outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
+	res = inb_p(client->addr + DATA_REG_OFFSET);
+	if (word_sized) {
+		outb_p((reg & 0xff) + 1,
+		       client->addr + ADDR_REG_OFFSET);
+		res = (res << 8) + inb_p(client->addr + DATA_REG_OFFSET);
+	}
+	w83627ehf_reset_bank(client, reg);
+
+	up(&data->lock);
+
+	return res;
+}
+
+static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct w83627ehf_data *data = i2c_get_clientdata(client);
+	int word_sized = is_word_sized(reg);
+
+	down(&data->lock);
+
+	w83627ehf_set_bank(client, reg);
+	outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
+	if (word_sized) {
+		outb_p(value >> 8, client->addr + DATA_REG_OFFSET);
+		outb_p((reg & 0xff) + 1,
+		       client->addr + ADDR_REG_OFFSET);
+	}
+	outb_p(value & 0xff, client->addr + DATA_REG_OFFSET);
+	w83627ehf_reset_bank(client, reg);
+
+	up(&data->lock);
+	return 0;
+}
+
+/* This function assumes that the caller holds data->update_lock */
+static void w83627ehf_write_fan_div(struct i2c_client *client, int nr)
+{
+	struct w83627ehf_data *data = i2c_get_clientdata(client);
+	u8 reg;
+
+	switch (nr) {
+	case 0:
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf)
+		    | ((data->fan_div[0] & 0x03) << 4);
+		w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf)
+		    | ((data->fan_div[0] & 0x04) << 3);
+		w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+		break;
+	case 1:
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f)
+		    | ((data->fan_div[1] & 0x03) << 6);
+		w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf)
+		    | ((data->fan_div[1] & 0x04) << 4);
+		w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+		break;
+	case 2:
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV2) & 0x3f)
+		    | ((data->fan_div[2] & 0x03) << 6);
+		w83627ehf_write_value(client, W83627EHF_REG_FANDIV2, reg);
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0x7f)
+		    | ((data->fan_div[2] & 0x04) << 5);
+		w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+		break;
+	case 3:
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0xfc)
+		    | (data->fan_div[3] & 0x03);
+		w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT) & 0x7f)
+		    | ((data->fan_div[3] & 0x04) << 5);
+		w83627ehf_write_value(client, W83627EHF_REG_SMI_OVT, reg);
+		break;
+	case 4:
+		reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73)
+		    | ((data->fan_div[4] & 0x03) << 3)
+		    | ((data->fan_div[4] & 0x04) << 5);
+		w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
+		break;
+	}
+}
+
+static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627ehf_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ)
+	 || !data->valid) {
+		/* Fan clock dividers */
+		i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV2);
+		data->fan_div[2] = (i >> 6) & 0x03;
+		i = w83627ehf_read_value(client, W83627EHF_REG_VBAT);
+		data->fan_div[0] |= (i >> 3) & 0x04;
+		data->fan_div[1] |= (i >> 4) & 0x04;
+		data->fan_div[2] |= (i >> 5) & 0x04;
+		if (data->has_fan & ((1 << 3) | (1 << 4))) {
+			i = w83627ehf_read_value(client, W83627EHF_REG_DIODE);
+			data->fan_div[3] = i & 0x03;
+			data->fan_div[4] = ((i >> 2) & 0x03)
+					 | ((i >> 5) & 0x04);
+		}
+		if (data->has_fan & (1 << 3)) {
+			i = w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT);
+			data->fan_div[3] |= (i >> 5) & 0x04;
+		}
+
+		/* Measured fan speeds and limits */
+		for (i = 0; i < 5; i++) {
+			if (!(data->has_fan & (1 << i)))
+				continue;
+
+			data->fan[i] = w83627ehf_read_value(client,
+				       W83627EHF_REG_FAN[i]);
+			data->fan_min[i] = w83627ehf_read_value(client,
+					   W83627EHF_REG_FAN_MIN[i]);
+
+			/* If we failed to measure the fan speed and clock
+			   divider can be increased, let's try that for next
+			   time */
+			if (data->fan[i] == 0xff
+			 && data->fan_div[i] < 0x07) {
+			 	dev_dbg(&client->dev, "Increasing fan %d "
+					"clock divider from %u to %u\n",
+					i, div_from_reg(data->fan_div[i]),
+					div_from_reg(data->fan_div[i] + 1));
+				data->fan_div[i]++;
+				w83627ehf_write_fan_div(client, i);
+				/* Preserve min limit if possible */
+				if (data->fan_min[i] >= 2
+				 && data->fan_min[i] != 255)
+					w83627ehf_write_value(client,
+						W83627EHF_REG_FAN_MIN[i],
+						(data->fan_min[i] /= 2));
+			}
+		}
+
+		/* Measured temperatures and limits */
+		data->temp1 = w83627ehf_read_value(client,
+			      W83627EHF_REG_TEMP1);
+		data->temp1_max = w83627ehf_read_value(client,
+				  W83627EHF_REG_TEMP1_OVER);
+		data->temp1_max_hyst = w83627ehf_read_value(client,
+				       W83627EHF_REG_TEMP1_HYST);
+		for (i = 0; i < 2; i++) {
+			data->temp[i] = w83627ehf_read_value(client,
+					W83627EHF_REG_TEMP[i]);
+			data->temp_max[i] = w83627ehf_read_value(client,
+					    W83627EHF_REG_TEMP_OVER[i]);
+			data->temp_max_hyst[i] = w83627ehf_read_value(client,
+						 W83627EHF_REG_TEMP_HYST[i]);
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+	return data;
+}
+
+/*
+ * Sysfs callback functions
+ */
+
+#define show_fan_reg(reg) \
+static ssize_t \
+show_##reg(struct device *dev, char *buf, int nr) \
+{ \
+	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+	return sprintf(buf, "%d\n", \
+		       fan_from_reg(data->reg[nr], \
+				    div_from_reg(data->fan_div[nr]))); \
+}
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct w83627ehf_data *data = w83627ehf_update_device(dev);
+	return sprintf(buf, "%u\n",
+		       div_from_reg(data->fan_div[nr]));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627ehf_data *data = i2c_get_clientdata(client);
+	unsigned int val = simple_strtoul(buf, NULL, 10);
+	unsigned int reg;
+	u8 new_div;
+
+	down(&data->update_lock);
+	if (!val) {
+		/* No min limit, alarm disabled */
+		data->fan_min[nr] = 255;
+		new_div = data->fan_div[nr]; /* No change */
+		dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1);
+	} else if ((reg = 1350000U / val) >= 128 * 255) {
+		/* Speed below this value cannot possibly be represented,
+		   even with the highest divider (128) */
+		data->fan_min[nr] = 254;
+		new_div = 7; /* 128 == (1 << 7) */
+		dev_warn(dev, "fan%u low limit %u below minimum %u, set to "
+			 "minimum\n", nr + 1, val, fan_from_reg(254, 128));
+	} else if (!reg) {
+		/* Speed above this value cannot possibly be represented,
+		   even with the lowest divider (1) */
+		data->fan_min[nr] = 1;
+		new_div = 0; /* 1 == (1 << 0) */
+		dev_warn(dev, "fan%u low limit %u above maximum %u, set to "
+			 "maximum\n", nr + 1, val, fan_from_reg(1, 1));
+	} else {
+		/* Automatically pick the best divider, i.e. the one such
+		   that the min limit will correspond to a register value
+		   in the 96..192 range */
+		new_div = 0;
+		while (reg > 192 && new_div < 7) {
+			reg >>= 1;
+			new_div++;
+		}
+		data->fan_min[nr] = reg;
+	}
+
+	/* Write both the fan clock divider (if it changed) and the new
+	   fan min (unconditionally) */
+	if (new_div != data->fan_div[nr]) {
+		if (new_div > data->fan_div[nr])
+			data->fan[nr] >>= (data->fan_div[nr] - new_div);
+		else
+			data->fan[nr] <<= (new_div - data->fan_div[nr]);
+
+		dev_dbg(dev, "fan%u clock divider changed from %u to %u\n",
+			nr + 1, div_from_reg(data->fan_div[nr]),
+			div_from_reg(new_div));
+		data->fan_div[nr] = new_div;
+		w83627ehf_write_fan_div(client, nr);
+	}
+	w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr],
+			      data->fan_min[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t \
+show_reg_fan_##offset(struct device *dev, struct device_attribute *attr, \
+		      char *buf) \
+{ \
+	return show_fan(dev, buf, offset-1); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+		   show_reg_fan_##offset, NULL);
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t \
+show_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \
+			   char *buf) \
+{ \
+	return show_fan_min(dev, buf, offset-1); \
+} \
+static ssize_t \
+store_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \
+			    const char *buf, size_t count) \
+{ \
+	return store_fan_min(dev, buf, count, offset-1); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		   show_reg_fan##offset##_min, \
+		   store_reg_fan##offset##_min);
+
+#define sysfs_fan_div_offset(offset) \
+static ssize_t \
+show_reg_fan##offset##_div(struct device *dev, struct device_attribute *attr, \
+			   char *buf) \
+{ \
+	return show_fan_div(dev, buf, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
+		   show_reg_fan##offset##_div, NULL);
+
+sysfs_fan_offset(1);
+sysfs_fan_min_offset(1);
+sysfs_fan_div_offset(1);
+sysfs_fan_offset(2);
+sysfs_fan_min_offset(2);
+sysfs_fan_div_offset(2);
+sysfs_fan_offset(3);
+sysfs_fan_min_offset(3);
+sysfs_fan_div_offset(3);
+sysfs_fan_offset(4);
+sysfs_fan_min_offset(4);
+sysfs_fan_div_offset(4);
+sysfs_fan_offset(5);
+sysfs_fan_min_offset(5);
+sysfs_fan_div_offset(5);
+
+#define show_temp1_reg(reg) \
+static ssize_t \
+show_##reg(struct device *dev, struct device_attribute *attr, \
+	   char *buf) \
+{ \
+	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+	return sprintf(buf, "%d\n", temp1_from_reg(data->reg)); \
+}
+show_temp1_reg(temp1);
+show_temp1_reg(temp1_max);
+show_temp1_reg(temp1_max_hyst);
+
+#define store_temp1_reg(REG, reg) \
+static ssize_t \
+store_temp1_##reg(struct device *dev, struct device_attribute *attr, \
+		  const char *buf, size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627ehf_data *data = i2c_get_clientdata(client); \
+	u32 val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->temp1_##reg = temp1_to_reg(val); \
+	w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \
+			      data->temp1_##reg); \
+	up(&data->update_lock); \
+	return count; \
+}
+store_temp1_reg(OVER, max);
+store_temp1_reg(HYST, max_hyst);
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO| S_IWUSR,
+		   show_temp1_max, store_temp1_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO| S_IWUSR,
+		   show_temp1_max_hyst, store_temp1_max_hyst);
+
+#define show_temp_reg(reg) \
+static ssize_t \
+show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+	return sprintf(buf, "%d\n", \
+		       LM75_TEMP_FROM_REG(data->reg[nr])); \
+}
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_max_hyst);
+
+#define store_temp_reg(REG, reg) \
+static ssize_t \
+store_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627ehf_data *data = i2c_get_clientdata(client); \
+	u32 val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->reg[nr] = LM75_TEMP_TO_REG(val); \
+	w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \
+			      data->reg[nr]); \
+	up(&data->update_lock); \
+	return count; \
+}
+store_temp_reg(OVER, temp_max);
+store_temp_reg(HYST, temp_max_hyst);
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_reg_temp##offset (struct device *dev, struct device_attribute *attr, \
+		       char *buf) \
+{ \
+	return show_temp(dev, buf, offset - 2); \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+		   show_reg_temp##offset, NULL);
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t \
+show_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \
+			      char *buf) \
+{ \
+	return show_temp_##reg(dev, buf, offset - 2); \
+} \
+static ssize_t \
+store_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \
+			       const char *buf, size_t count) \
+{ \
+	return store_temp_##reg(dev, buf, count, offset - 2); \
+} \
+static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
+		   show_reg_temp##offset##_##reg, \
+		   store_reg_temp##offset##_##reg);
+
+sysfs_temp_offset(2);
+sysfs_temp_reg_offset(max, 2);
+sysfs_temp_reg_offset(max_hyst, 2);
+sysfs_temp_offset(3);
+sysfs_temp_reg_offset(max, 3);
+sysfs_temp_reg_offset(max_hyst, 3);
+
+/*
+ * Driver and client management
+ */
+
+static struct i2c_driver w83627ehf_driver;
+
+static void w83627ehf_init_client(struct i2c_client *client)
+{
+	int i;
+	u8 tmp;
+
+	/* Start monitoring is needed */
+	tmp = w83627ehf_read_value(client, W83627EHF_REG_CONFIG);
+	if (!(tmp & 0x01))
+		w83627ehf_write_value(client, W83627EHF_REG_CONFIG,
+				      tmp | 0x01);
+
+	/* Enable temp2 and temp3 if needed */
+	for (i = 0; i < 2; i++) {
+		tmp = w83627ehf_read_value(client,
+					   W83627EHF_REG_TEMP_CONFIG[i]);
+		if (tmp & 0x01)
+			w83627ehf_write_value(client,
+					      W83627EHF_REG_TEMP_CONFIG[i],
+					      tmp & 0xfe);
+	}
+}
+
+static int w83627ehf_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct w83627ehf_data *data;
+	int i, err = 0;
+
+	if (!i2c_is_isa_adapter(adapter))
+		return 0;
+
+	if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) {
+		err = -EBUSY;
+		goto exit;
+	}
+
+	if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+	memset(data, 0, sizeof(struct w83627ehf_data));
+
+	client = &data->client;
+	i2c_set_clientdata(client, data);
+	client->addr = address;
+	init_MUTEX(&data->lock);
+	client->adapter = adapter;
+	client->driver = &w83627ehf_driver;
+	client->flags = 0;
+
+	strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the i2c layer a new client has arrived */
+	if ((err = i2c_attach_client(client)))
+		goto exit_free;
+
+	/* Initialize the chip */
+	w83627ehf_init_client(client);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 0; i < 5; i++)
+		data->fan_min[i] = w83627ehf_read_value(client,
+				   W83627EHF_REG_FAN_MIN[i]);
+
+	/* It looks like fan4 and fan5 pins can be alternatively used
+	   as fan on/off switches */
+	data->has_fan = 0x07; /* fan1, fan2 and fan3 */
+	i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
+	if (i & (1 << 2))
+		data->has_fan |= (1 << 3);
+	if (i & (1 << 0))
+		data->has_fan |= (1 << 4);
+
+	/* Register sysfs hooks */
+	device_create_file(&client->dev, &dev_attr_fan1_input);
+	device_create_file(&client->dev, &dev_attr_fan1_min);
+	device_create_file(&client->dev, &dev_attr_fan1_div);
+	device_create_file(&client->dev, &dev_attr_fan2_input);
+	device_create_file(&client->dev, &dev_attr_fan2_min);
+	device_create_file(&client->dev, &dev_attr_fan2_div);
+	device_create_file(&client->dev, &dev_attr_fan3_input);
+	device_create_file(&client->dev, &dev_attr_fan3_min);
+	device_create_file(&client->dev, &dev_attr_fan3_div);
+
+	if (data->has_fan & (1 << 3)) {
+		device_create_file(&client->dev, &dev_attr_fan4_input);
+		device_create_file(&client->dev, &dev_attr_fan4_min);
+		device_create_file(&client->dev, &dev_attr_fan4_div);
+	}
+	if (data->has_fan & (1 << 4)) {
+		device_create_file(&client->dev, &dev_attr_fan5_input);
+		device_create_file(&client->dev, &dev_attr_fan5_min);
+		device_create_file(&client->dev, &dev_attr_fan5_div);
+	}
+
+	device_create_file(&client->dev, &dev_attr_temp1_input);
+	device_create_file(&client->dev, &dev_attr_temp1_max);
+	device_create_file(&client->dev, &dev_attr_temp1_max_hyst);
+	device_create_file(&client->dev, &dev_attr_temp2_input);
+	device_create_file(&client->dev, &dev_attr_temp2_max);
+	device_create_file(&client->dev, &dev_attr_temp2_max_hyst);
+	device_create_file(&client->dev, &dev_attr_temp3_input);
+	device_create_file(&client->dev, &dev_attr_temp3_max);
+	device_create_file(&client->dev, &dev_attr_temp3_max_hyst);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit_release:
+	release_region(address, REGION_LENGTH);
+exit:
+	return err;
+}
+
+static int w83627ehf_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, w83627ehf_detect);
+}
+
+static int w83627ehf_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+	release_region(client->addr, REGION_LENGTH);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static struct i2c_driver w83627ehf_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "w83627ehf",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= w83627ehf_attach_adapter,
+	.detach_client	= w83627ehf_detach_client,
+};
+
+static int __init w83627ehf_find(int sioaddr, int *address)
+{
+	u16 val;
+
+	REG = sioaddr;
+	VAL = sioaddr + 1;
+	superio_enter();
+
+	val = (superio_inb(SIO_REG_DEVID) << 8)
+	    | superio_inb(SIO_REG_DEVID + 1);
+	if ((val & SIO_ID_MASK) != SIO_W83627EHF_ID) {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	superio_select(W83627EHF_LD_HWM);
+	val = (superio_inb(SIO_REG_ADDR) << 8)
+	    | superio_inb(SIO_REG_ADDR + 1);
+	*address = val & ~(REGION_LENGTH - 1);
+	if (*address == 0) {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	/* Activate logical device if needed */
+	val = superio_inb(SIO_REG_ENABLE);
+	if (!(val & 0x01))
+		superio_outb(SIO_REG_ENABLE, val | 0x01);
+
+	superio_exit();
+	return 0;
+}
+
+static int __init sensors_w83627ehf_init(void)
+{
+	if (w83627ehf_find(0x2e, &normal_isa[0])
+	 && w83627ehf_find(0x4e, &normal_isa[0]))
+		return -ENODEV;
+
+	return i2c_add_driver(&w83627ehf_driver);
+}
+
+static void __exit sensors_w83627ehf_exit(void)
+{
+	i2c_del_driver(&w83627ehf_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("W83627EHF driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83627ehf_init);
+module_exit(sensors_w83627ehf_exit);
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
new file mode 100644
index 000000000000..bd87a42e068a
--- /dev/null
+++ b/drivers/hwmon/w83627hf.c
@@ -0,0 +1,1511 @@
+/*
+    w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (c) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>,
+    and Mark Studebaker <mdsxyz123@yahoo.com>
+    Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    Supports following chips:
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    w83627hf	9	3	2	3	0x20	0x5ca3	no	yes(LPC)
+    w83627thf	7	3	3	3	0x90	0x5ca3	no	yes(LPC)
+    w83637hf	7	3	3	3	0x80	0x5ca3	no	yes(LPC)
+    w83697hf	8	2	2	2	0x60	0x5ca3	no	yes(LPC)
+
+    For other winbond chips, and for i2c support in the above chips,
+    use w83781d.c.
+
+    Note: automatic ("cruise") fan control for 697, 637 & 627thf not
+    supported yet.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+static u8 force_i2c = 0x1f;
+module_param(force_i2c, byte, 0);
+MODULE_PARM_DESC(force_i2c,
+		 "Initialize the i2c address of the sensors");
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_4(w83627hf, w83627thf, w83697hf, w83637hf);
+
+static int init = 1;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+/* modified from kernel/include/traps.c */
+static int REG;		/* The register to read/write */
+#define	DEV	0x07	/* Register: Logical device select */
+static int VAL;		/* The value to read/write */
+
+/* logical device numbers for superio_select (below) */
+#define W83627HF_LD_FDC		0x00
+#define W83627HF_LD_PRT		0x01
+#define W83627HF_LD_UART1	0x02
+#define W83627HF_LD_UART2	0x03
+#define W83627HF_LD_KBC		0x05
+#define W83627HF_LD_CIR		0x06 /* w83627hf only */
+#define W83627HF_LD_GAME	0x07
+#define W83627HF_LD_MIDI	0x07
+#define W83627HF_LD_GPIO1	0x07
+#define W83627HF_LD_GPIO5	0x07 /* w83627thf only */
+#define W83627HF_LD_GPIO2	0x08
+#define W83627HF_LD_GPIO3	0x09
+#define W83627HF_LD_GPIO4	0x09 /* w83627thf only */
+#define W83627HF_LD_ACPI	0x0a
+#define W83627HF_LD_HWM		0x0b
+
+#define	DEVID	0x20	/* Register: Device ID */
+
+#define W83627THF_GPIO5_EN	0x30 /* w83627thf only */
+#define W83627THF_GPIO5_IOSR	0xf3 /* w83627thf only */
+#define W83627THF_GPIO5_DR	0xf4 /* w83627thf only */
+
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int
+superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static inline void
+superio_select(int ld)
+{
+	outb(DEV, REG);
+	outb(ld, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+	outb(0x87, REG);
+	outb(0x87, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+	outb(0xAA, REG);
+}
+
+#define W627_DEVID 0x52
+#define W627THF_DEVID 0x82
+#define W697_DEVID 0x60
+#define W637_DEVID 0x70
+#define WINB_ACT_REG 0x30
+#define WINB_BASE_REG 0x60
+/* Constants specified below */
+
+/* Length of ISA address segment */
+#define WINB_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define W83781D_ADDR_REG_OFFSET 5
+#define W83781D_DATA_REG_OFFSET 6
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
+					   (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
+					   (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr)     ((nr < 7) ? (0x20 + (nr)) : \
+					   (0x550 + (nr) - 7))
+
+#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
+#define W83781D_REG_FAN(nr) (0x27 + (nr))
+
+#define W83781D_REG_TEMP2_CONFIG 0x152
+#define W83781D_REG_TEMP3_CONFIG 0x252
+#define W83781D_REG_TEMP(nr)		((nr == 3) ? (0x0250) : \
+					((nr == 2) ? (0x0150) : \
+					             (0x27)))
+#define W83781D_REG_TEMP_HYST(nr)	((nr == 3) ? (0x253) : \
+					((nr == 2) ? (0x153) : \
+					             (0x3A)))
+#define W83781D_REG_TEMP_OVER(nr)	((nr == 3) ? (0x255) : \
+					((nr == 2) ? (0x155) : \
+					             (0x39)))
+
+#define W83781D_REG_BANK 0x4E
+
+#define W83781D_REG_CONFIG 0x40
+#define W83781D_REG_ALARM1 0x41
+#define W83781D_REG_ALARM2 0x42
+#define W83781D_REG_ALARM3 0x450
+
+#define W83781D_REG_IRQ 0x4C
+#define W83781D_REG_BEEP_CONFIG 0x4D
+#define W83781D_REG_BEEP_INTS1 0x56
+#define W83781D_REG_BEEP_INTS2 0x57
+#define W83781D_REG_BEEP_INTS3 0x453
+
+#define W83781D_REG_VID_FANDIV 0x47
+
+#define W83781D_REG_CHIPID 0x49
+#define W83781D_REG_WCHIPID 0x58
+#define W83781D_REG_CHIPMAN 0x4F
+#define W83781D_REG_PIN 0x4B
+
+#define W83781D_REG_VBAT 0x5D
+
+#define W83627HF_REG_PWM1 0x5A
+#define W83627HF_REG_PWM2 0x5B
+#define W83627HF_REG_PWMCLK12 0x5C
+
+#define W83627THF_REG_PWM1		0x01	/* 697HF and 637HF too */
+#define W83627THF_REG_PWM2		0x03	/* 697HF and 637HF too */
+#define W83627THF_REG_PWM3		0x11	/* 637HF too */
+
+#define W83627THF_REG_VRM_OVT_CFG 	0x18	/* 637HF too */
+
+static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
+static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
+                             W83627THF_REG_PWM3 };
+#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
+                                     regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1])
+
+#define W83781D_REG_I2C_ADDR 0x48
+#define W83781D_REG_I2C_SUBADDR 0x4A
+
+/* Sensor selection */
+#define W83781D_REG_SCFG1 0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+#define W83781D_REG_SCFG2 0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+#define W83781D_DEFAULT_BETA 3435
+
+/* Conversions. Limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+#define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
+#define IN_FROM_REG(val) ((val) * 16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+			     254);
+}
+
+#define TEMP_MIN (-128000)
+#define TEMP_MAX ( 127000)
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static u8 TEMP_TO_REG(int temp)
+{
+        int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
+        ntemp += (ntemp<0 ? -500 : 500);
+        return (u8)(ntemp / 1000);
+}
+
+static int TEMP_FROM_REG(u8 reg)
+{
+        return (s8)reg * 1000;
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+
+#define BEEP_MASK_FROM_REG(val)		 (val)
+#define BEEP_MASK_TO_REG(val)		((val) & 0xffffff)
+#define BEEP_ENABLE_TO_REG(val)		((val)?1:0)
+#define BEEP_ENABLE_FROM_REG(val)	((val)?1:0)
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+static inline u8 DIV_TO_REG(long val)
+{
+	int i;
+	val = SENSORS_LIMIT(val, 1, 128) >> 1;
+	for (i = 0; i < 7; i++) {
+		if (val == 0)
+			break;
+		val >>= 1;
+	}
+	return ((u8) i);
+}
+
+/* For each registered chip, we need to keep some data in memory. That
+   data is pointed to by w83627hf_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new client is allocated. */
+struct w83627hf_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	struct i2c_client *lm75;	/* for secondary I2C addresses */
+	/* pointer to array of 2 subclients */
+
+	u8 in[9];		/* Register value */
+	u8 in_max[9];		/* Register value */
+	u8 in_min[9];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 temp;
+	u8 temp_max;		/* Register value */
+	u8 temp_max_hyst;	/* Register value */
+	u16 temp_add[2];	/* Register value */
+	u16 temp_max_add[2];	/* Register value */
+	u16 temp_max_hyst_add[2]; /* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	u32 alarms;		/* Register encoding, combined */
+	u32 beep_mask;		/* Register encoding, combined */
+	u8 beep_enable;		/* Boolean */
+	u8 pwm[3];		/* Register value */
+	u16 sens[3];		/* 782D/783S only.
+				   1 = pentium diode; 2 = 3904 diode;
+				   3000-5000 = thermistor beta.
+				   Default = 3435.
+				   Other Betas unimplemented */
+	u8 vrm;
+	u8 vrm_ovt;		/* Register value, 627thf & 637hf only */
+};
+
+
+static int w83627hf_attach_adapter(struct i2c_adapter *adapter);
+static int w83627hf_detect(struct i2c_adapter *adapter, int address,
+			  int kind);
+static int w83627hf_detach_client(struct i2c_client *client);
+
+static int w83627hf_read_value(struct i2c_client *client, u16 register);
+static int w83627hf_write_value(struct i2c_client *client, u16 register,
+			       u16 value);
+static struct w83627hf_data *w83627hf_update_device(struct device *dev);
+static void w83627hf_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83627hf_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "w83627hf",
+	.id		= I2C_DRIVERID_W83627HF,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= w83627hf_attach_adapter,
+	.detach_client	= w83627hf_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83627hf_data *data = w83627hf_update_device(dev); \
+	return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \
+}
+show_in_reg(in)
+show_in_reg(in_min)
+show_in_reg(in_max)
+
+#define store_in_reg(REG, reg) \
+static ssize_t \
+store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	u32 val; \
+	 \
+	val = simple_strtoul(buf, NULL, 10); \
+	 \
+	down(&data->update_lock); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \
+			    data->in_##reg[nr]); \
+	 \
+	up(&data->update_lock); \
+	return count; \
+}
+store_in_reg(MIN, min)
+store_in_reg(MAX, max)
+
+#define sysfs_in_offset(offset) \
+static ssize_t \
+show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+        return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
+
+#define sysfs_in_reg_offset(reg, offset) \
+static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_in_##reg (dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, \
+			    const char *buf, size_t count) \
+{ \
+	return store_in_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, \
+		  show_regs_in_##reg##offset, store_regs_in_##reg##offset);
+
+#define sysfs_in_offsets(offset) \
+sysfs_in_offset(offset) \
+sysfs_in_reg_offset(min, offset) \
+sysfs_in_reg_offset(max, offset)
+
+sysfs_in_offsets(1);
+sysfs_in_offsets(2);
+sysfs_in_offsets(3);
+sysfs_in_offsets(4);
+sysfs_in_offsets(5);
+sysfs_in_offsets(6);
+sysfs_in_offsets(7);
+sysfs_in_offsets(8);
+
+/* use a different set of functions for in0 */
+static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
+{
+	long in0;
+
+	if ((data->vrm_ovt & 0x01) &&
+		(w83627thf == data->type || w83637hf == data->type))
+
+		/* use VRM9 calculation */
+		in0 = (long)((reg * 488 + 70000 + 50) / 100);
+	else
+		/* use VRM8 (standard) calculation */
+		in0 = (long)IN_FROM_REG(reg);
+
+	return sprintf(buf,"%ld\n", in0);
+}
+
+static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return show_in_0(data, buf, data->in[0]);
+}
+
+static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return show_in_0(data, buf, data->in_min[0]);
+}
+
+static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return show_in_0(data, buf, data->in_max[0]);
+}
+
+static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	
+	if ((data->vrm_ovt & 0x01) &&
+		(w83627thf == data->type || w83637hf == data->type))
+
+		/* use VRM9 calculation */
+		data->in_min[0] = (u8)(((val * 100) - 70000 + 244) / 488);
+	else
+		/* use VRM8 (standard) calculation */
+		data->in_min[0] = IN_TO_REG(val);
+
+	w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if ((data->vrm_ovt & 0x01) &&
+		(w83627thf == data->type || w83637hf == data->type))
+		
+		/* use VRM9 calculation */
+		data->in_max[0] = (u8)(((val * 100) - 70000 + 244) / 488);
+	else
+		/* use VRM8 (standard) calculation */
+		data->in_max[0] = IN_TO_REG(val);
+
+	w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
+static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
+	show_regs_in_min0, store_regs_in_min0);
+static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
+	show_regs_in_max0, store_regs_in_max0);
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83627hf_data *data = w83627hf_update_device(dev); \
+	return sprintf(buf,"%ld\n", \
+		FAN_FROM_REG(data->reg[nr-1], \
+			    (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+}
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr - 1] =
+	    FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
+	w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr),
+			    data->fan_min[nr - 1]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan(dev, buf, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan_min(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	return store_fan_min(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		  show_regs_fan_min##offset, store_regs_fan_min##offset);
+
+sysfs_fan_offset(1);
+sysfs_fan_min_offset(1);
+sysfs_fan_offset(2);
+sysfs_fan_min_offset(2);
+sysfs_fan_offset(3);
+sysfs_fan_min_offset(3);
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+} while (0)
+
+#define show_temp_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83627hf_data *data = w83627hf_update_device(dev); \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		return sprintf(buf,"%ld\n", \
+			(long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
+	} else {	/* TEMP1 */ \
+		return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+	} \
+}
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_max_hyst);
+
+#define store_temp_reg(REG, reg) \
+static ssize_t \
+store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	u32 val; \
+	 \
+	val = simple_strtoul(buf, NULL, 10); \
+	 \
+	down(&data->update_lock); \
+	 \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
+		w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+				data->temp_##reg##_add[nr-2]); \
+	} else {	/* TEMP1 */ \
+		data->temp_##reg = TEMP_TO_REG(val); \
+		w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+			data->temp_##reg); \
+	} \
+	 \
+	up(&data->update_lock); \
+	return count; \
+}
+store_temp_reg(OVER, max);
+store_temp_reg(HYST, max_hyst);
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp(dev, buf, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp_##reg (dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, \
+			      const char *buf, size_t count) \
+{ \
+	return store_temp_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
+		  show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
+
+#define sysfs_temp_offsets(offset) \
+sysfs_temp_offset(offset) \
+sysfs_temp_reg_offset(max, offset) \
+sysfs_temp_reg_offset(max_hyst, offset)
+
+sysfs_temp_offsets(1);
+sysfs_temp_offsets(2);
+sysfs_temp_offsets(3);
+
+#define device_create_file_temp(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
+} while (0)
+
+static ssize_t
+show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+static ssize_t
+show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+static ssize_t
+store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm)
+
+static ssize_t
+show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms)
+
+#define show_beep_reg(REG, reg) \
+static ssize_t show_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct w83627hf_data *data = w83627hf_update_device(dev); \
+	return sprintf(buf,"%ld\n", \
+		      (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \
+}
+show_beep_reg(ENABLE, enable)
+show_beep_reg(MASK, mask)
+
+#define BEEP_ENABLE			0	/* Store beep_enable */
+#define BEEP_MASK			1	/* Store beep_mask */
+
+static ssize_t
+store_beep_reg(struct device *dev, const char *buf, size_t count,
+	       int update_mask)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val, val2;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if (update_mask == BEEP_MASK) {	/* We are storing beep_mask */
+		data->beep_mask = BEEP_MASK_TO_REG(val);
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS1,
+				    data->beep_mask & 0xff);
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS3,
+				    ((data->beep_mask) >> 16) & 0xff);
+		val2 = (data->beep_mask >> 8) & 0x7f;
+	} else {		/* We are storing beep_enable */
+		val2 =
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
+		data->beep_enable = BEEP_ENABLE_TO_REG(val);
+	}
+
+	w83627hf_write_value(client, W83781D_REG_BEEP_INTS2,
+			    val2 | data->beep_enable << 7);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_beep(REG, reg) \
+static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_beep_##reg(dev, attr, buf); \
+} \
+static ssize_t \
+store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	return store_beep_reg(dev, buf, count, BEEP_##REG); \
+} \
+static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \
+		  show_regs_beep_##reg, store_regs_beep_##reg);
+
+sysfs_beep(ENABLE, enable);
+sysfs_beep(MASK, mask);
+
+#define device_create_file_beep(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask); \
+} while (0)
+
+static ssize_t
+show_fan_div_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n",
+		       (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t
+store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	u8 reg;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	/* Save fan_min */
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   DIV_FROM_REG(data->fan_div[nr]));
+
+	data->fan_div[nr] = DIV_TO_REG(val);
+
+	reg = (w83627hf_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+	       & (nr==0 ? 0xcf : 0x3f))
+	    | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
+	w83627hf_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+
+	reg = (w83627hf_read_value(client, W83781D_REG_VBAT)
+	       & ~(1 << (5 + nr)))
+	    | ((data->fan_div[nr] & 0x04) << (3 + nr));
+	w83627hf_write_value(client, W83781D_REG_VBAT, reg);
+
+	/* Restore fan_min */
+	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_fan_div(offset) \
+static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan_div_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, \
+			    const char *buf, size_t count) \
+{ \
+	return store_fan_div_reg(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+		  show_regs_fan_div_##offset, store_regs_fan_div_##offset);
+
+sysfs_fan_div(1);
+sysfs_fan_div(2);
+sysfs_fan_div(3);
+
+#define device_create_file_fan_div(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+static ssize_t
+show_pwm_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]);
+}
+
+static ssize_t
+store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if (data->type == w83627thf) {
+		/* bits 0-3 are reserved  in 627THF */
+		data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0;
+		w83627hf_write_value(client,
+				     W836X7HF_REG_PWM(data->type, nr),
+				     data->pwm[nr - 1] |
+				     (w83627hf_read_value(client,
+				     W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
+	} else {
+		data->pwm[nr - 1] = PWM_TO_REG(val);
+		w83627hf_write_value(client,
+				     W836X7HF_REG_PWM(data->type, nr),
+				     data->pwm[nr - 1]);
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_pwm(offset) \
+static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_pwm_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	return store_pwm_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+		  show_regs_pwm_##offset, store_regs_pwm_##offset);
+
+sysfs_pwm(1);
+sysfs_pwm(2);
+sysfs_pwm(3);
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset); \
+} while (0)
+
+static ssize_t
+show_sensor_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+}
+
+static ssize_t
+store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val, tmp;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	switch (val) {
+	case 1:		/* PII/Celeron diode */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
+		w83627hf_write_value(client, W83781D_REG_SCFG2,
+				    tmp | BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case 2:		/* 3904 */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
+		w83627hf_write_value(client, W83781D_REG_SCFG2,
+				    tmp & ~BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case W83781D_DEFAULT_BETA:	/* thermistor */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp & ~BIT_SCFG1[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	default:
+		dev_err(&client->dev,
+		       "Invalid sensor type %ld; must be 1, 2, or %d\n",
+		       (long) val, W83781D_DEFAULT_BETA);
+		break;
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_sensor(offset) \
+static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+    return show_sensor_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+    return store_sensor_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
+		  show_regs_sensor_##offset, store_regs_sensor_##offset);
+
+sysfs_sensor(1);
+sysfs_sensor(2);
+sysfs_sensor(3);
+
+#define device_create_file_sensor(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
+} while (0)
+
+
+/* This function is called when:
+     * w83627hf_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and w83627hf_driver is still present) */
+static int w83627hf_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, w83627hf_detect);
+}
+
+static int w83627hf_find(int sioaddr, int *address)
+{
+	u16 val;
+
+	REG = sioaddr;
+	VAL = sioaddr + 1;
+
+	superio_enter();
+	val= superio_inb(DEVID);
+	if(val != W627_DEVID &&
+	   val != W627THF_DEVID &&
+	   val != W697_DEVID &&
+	   val != W637_DEVID) {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	superio_select(W83627HF_LD_HWM);
+	val = (superio_inb(WINB_BASE_REG) << 8) |
+	       superio_inb(WINB_BASE_REG + 1);
+	*address = val & ~(WINB_EXTENT - 1);
+	if (*address == 0 && force_addr == 0) {
+		superio_exit();
+		return -ENODEV;
+	}
+	if (force_addr)
+		*address = force_addr;	/* so detect will get called */
+
+	superio_exit();
+	return 0;
+}
+
+int w83627hf_detect(struct i2c_adapter *adapter, int address,
+		   int kind)
+{
+	int val;
+	struct i2c_client *new_client;
+	struct w83627hf_data *data;
+	int err = 0;
+	const char *client_name = "";
+
+	if (!i2c_is_isa_adapter(adapter)) {
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	if(force_addr)
+		address = force_addr & ~(WINB_EXTENT - 1);
+
+	if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) {
+		err = -EBUSY;
+		goto ERROR0;
+	}
+
+	if(force_addr) {
+		printk("w83627hf.o: forcing ISA address 0x%04X\n", address);
+		superio_enter();
+		superio_select(W83627HF_LD_HWM);
+		superio_outb(WINB_BASE_REG, address >> 8);
+		superio_outb(WINB_BASE_REG+1, address & 0xff);
+		superio_exit();
+	}
+
+	superio_enter();
+	val= superio_inb(DEVID);
+	if(val == W627_DEVID)
+		kind = w83627hf;
+	else if(val == W697_DEVID)
+		kind = w83697hf;
+	else if(val == W627THF_DEVID)
+		kind = w83627thf;
+	else if(val == W637_DEVID)
+		kind = w83637hf;
+	else {
+		dev_info(&adapter->dev,
+			 "Unsupported chip (dev_id=0x%02X).\n", val);
+		goto ERROR1;
+	}
+
+	superio_select(W83627HF_LD_HWM);
+	if((val = 0x01 & superio_inb(WINB_ACT_REG)) == 0)
+		superio_outb(WINB_ACT_REG, 1);
+	superio_exit();
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access w83627hf_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+	memset(data, 0, sizeof(struct w83627hf_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &w83627hf_driver;
+	new_client->flags = 0;
+
+
+	if (kind == w83627hf) {
+		client_name = "w83627hf";
+	} else if (kind == w83627thf) {
+		client_name = "w83627thf";
+	} else if (kind == w83697hf) {
+		client_name = "w83697hf";
+	} else if (kind == w83637hf) {
+		client_name = "w83637hf";
+	}
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	data->lm75 = NULL;
+
+	/* Initialize the chip */
+	w83627hf_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	data->fan_min[0] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(1));
+	data->fan_min[1] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(2));
+	data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3));
+
+	/* Register sysfs hooks */
+	device_create_file_in(new_client, 0);
+	if (kind != w83697hf)
+		device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	device_create_file_in(new_client, 4);
+	if (kind != w83627thf && kind != w83637hf) {
+		device_create_file_in(new_client, 5);
+		device_create_file_in(new_client, 6);
+	}
+	device_create_file_in(new_client, 7);
+	device_create_file_in(new_client, 8);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_temp(new_client, 3);
+
+	if (kind != w83697hf)
+		device_create_file_vid(new_client);
+
+	if (kind != w83697hf)
+		device_create_file_vrm(new_client);
+
+	device_create_file_fan_div(new_client, 1);
+	device_create_file_fan_div(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_fan_div(new_client, 3);
+
+	device_create_file_alarms(new_client);
+
+	device_create_file_beep(new_client);
+
+	device_create_file_pwm(new_client, 1);
+	device_create_file_pwm(new_client, 2);
+	if (kind == w83627thf || kind == w83637hf)
+		device_create_file_pwm(new_client, 3);
+
+	device_create_file_sensor(new_client, 1);
+	device_create_file_sensor(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_sensor(new_client, 3);
+
+	return 0;
+
+      ERROR2:
+	kfree(data);
+      ERROR1:
+	release_region(address, WINB_EXTENT);
+      ERROR0:
+	return err;
+}
+
+static int w83627hf_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		       "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, WINB_EXTENT);
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+
+/*
+   ISA access must always be locked explicitly!
+   We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the W83781D access and should not be necessary.
+   There are some ugly typecasts here, but the good news is - they should
+   nowhere else be necessary! */
+static int w83627hf_read_value(struct i2c_client *client, u16 reg)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int res, word_sized;
+
+	down(&data->lock);
+	word_sized = (((reg & 0xff00) == 0x100)
+		   || ((reg & 0xff00) == 0x200))
+		  && (((reg & 0x00ff) == 0x50)
+		   || ((reg & 0x00ff) == 0x53)
+		   || ((reg & 0x00ff) == 0x55));
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+	res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
+	if (word_sized) {
+		outb_p((reg & 0xff) + 1,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		res =
+		    (res << 8) + inb_p(client->addr +
+				       W83781D_DATA_REG_OFFSET);
+	}
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	up(&data->lock);
+	return res;
+}
+
+static int w83627thf_read_gpio5(struct i2c_client *client)
+{
+	int res = 0xff, sel;
+
+	superio_enter();
+	superio_select(W83627HF_LD_GPIO5);
+
+	/* Make sure these GPIO pins are enabled */
+	if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
+		dev_dbg(&client->dev, "GPIO5 disabled, no VID function\n");
+		goto exit;
+	}
+
+	/* Make sure the pins are configured for input
+	   There must be at least five (VRM 9), and possibly 6 (VRM 10) */
+	sel = superio_inb(W83627THF_GPIO5_IOSR);
+	if ((sel & 0x1f) != 0x1f) {
+		dev_dbg(&client->dev, "GPIO5 not configured for VID "
+			"function\n");
+		goto exit;
+	}
+
+	dev_info(&client->dev, "Reading VID from GPIO5\n");
+	res = superio_inb(W83627THF_GPIO5_DR) & sel;
+
+exit:
+	superio_exit();
+	return res;
+}
+
+static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int word_sized;
+
+	down(&data->lock);
+	word_sized = (((reg & 0xff00) == 0x100)
+		   || ((reg & 0xff00) == 0x200))
+		  && (((reg & 0x00ff) == 0x53)
+		   || ((reg & 0x00ff) == 0x55));
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+	if (word_sized) {
+		outb_p(value >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+		outb_p((reg & 0xff) + 1,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+	}
+	outb_p(value & 0xff,
+	       client->addr + W83781D_DATA_REG_OFFSET);
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	up(&data->lock);
+	return 0;
+}
+
+/* Called when we have found a new W83781D. It should set limits, etc. */
+static void w83627hf_init_client(struct i2c_client *client)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int i;
+	int type = data->type;
+	u8 tmp;
+
+	if(init) {
+		/* save this register */
+		i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG);
+		/* Reset all except Watchdog values and last conversion values
+		   This sets fan-divs to 2, among others */
+		w83627hf_write_value(client, W83781D_REG_CONFIG, 0x80);
+		/* Restore the register and disable power-on abnormal beep.
+		   This saves FAN 1/2/3 input/output values set by BIOS. */
+		w83627hf_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+		/* Disable master beep-enable (reset turns it on).
+		   Individual beeps should be reset to off but for some reason
+		   disabling this bit helps some people not get beeped */
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+	}
+
+	/* Minimize conflicts with other winbond i2c-only clients...  */
+	/* disable i2c subclients... how to disable main i2c client?? */
+	/* force i2c address to relatively uncommon address */
+	w83627hf_write_value(client, W83781D_REG_I2C_SUBADDR, 0x89);
+	w83627hf_write_value(client, W83781D_REG_I2C_ADDR, force_i2c);
+
+	/* Read VID only once */
+	if (w83627hf == data->type || w83637hf == data->type) {
+		int lo = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+		int hi = w83627hf_read_value(client, W83781D_REG_CHIPID);
+		data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
+	} else if (w83627thf == data->type) {
+		data->vid = w83627thf_read_gpio5(client) & 0x3f;
+	}
+
+	/* Read VRM & OVT Config only once */
+	if (w83627thf == data->type || w83637hf == data->type) {
+		data->vrm_ovt = 
+			w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
+		data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
+	} else {
+		/* Convert VID to voltage based on default VRM */
+		data->vrm = i2c_which_vrm();
+	}
+
+	tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+	for (i = 1; i <= 3; i++) {
+		if (!(tmp & BIT_SCFG1[i - 1])) {
+			data->sens[i - 1] = W83781D_DEFAULT_BETA;
+		} else {
+			if (w83627hf_read_value
+			    (client,
+			     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+				data->sens[i - 1] = 1;
+			else
+				data->sens[i - 1] = 2;
+		}
+		if ((type == w83697hf) && (i == 2))
+			break;
+	}
+
+	if(init) {
+		/* Enable temp2 */
+		tmp = w83627hf_read_value(client, W83781D_REG_TEMP2_CONFIG);
+		if (tmp & 0x01) {
+			dev_warn(&client->dev, "Enabling temp2, readings "
+				 "might not make sense\n");
+			w83627hf_write_value(client, W83781D_REG_TEMP2_CONFIG,
+				tmp & 0xfe);
+		}
+
+		/* Enable temp3 */
+		if (type != w83697hf) {
+			tmp = w83627hf_read_value(client,
+				W83781D_REG_TEMP3_CONFIG);
+			if (tmp & 0x01) {
+				dev_warn(&client->dev, "Enabling temp3, "
+					 "readings might not make sense\n");
+				w83627hf_write_value(client,
+					W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
+			}
+		}
+
+		if (type == w83627hf) {
+			/* enable PWM2 control (can't hurt since PWM reg
+		           should have been reset to 0xff) */
+			w83627hf_write_value(client, W83627HF_REG_PWMCLK12,
+					    0x19);
+		}
+		/* enable comparator mode for temp2 and temp3 so
+	           alarm indication will work correctly */
+		i = w83627hf_read_value(client, W83781D_REG_IRQ);
+		if (!(i & 0x40))
+			w83627hf_write_value(client, W83781D_REG_IRQ,
+					    i | 0x40);
+	}
+
+	/* Start monitoring */
+	w83627hf_write_value(client, W83781D_REG_CONFIG,
+			    (w83627hf_read_value(client,
+						W83781D_REG_CONFIG) & 0xf7)
+			    | 0x01);
+}
+
+static struct w83627hf_data *w83627hf_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		for (i = 0; i <= 8; i++) {
+			/* skip missing sensors */
+			if (((data->type == w83697hf) && (i == 1)) ||
+			    ((data->type == w83627thf || data->type == w83637hf)
+			    && (i == 4 || i == 5)))
+				continue;
+			data->in[i] =
+			    w83627hf_read_value(client, W83781D_REG_IN(i));
+			data->in_min[i] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_IN_MIN(i));
+			data->in_max[i] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_IN_MAX(i));
+		}
+		for (i = 1; i <= 3; i++) {
+			data->fan[i - 1] =
+			    w83627hf_read_value(client, W83781D_REG_FAN(i));
+			data->fan_min[i - 1] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_FAN_MIN(i));
+		}
+		for (i = 1; i <= 3; i++) {
+			u8 tmp = w83627hf_read_value(client,
+				W836X7HF_REG_PWM(data->type, i));
+ 			/* bits 0-3 are reserved  in 627THF */
+ 			if (data->type == w83627thf)
+				tmp &= 0xf0;
+			data->pwm[i - 1] = tmp;
+			if(i == 2 &&
+			   (data->type == w83627hf || data->type == w83697hf))
+				break;
+		}
+
+		data->temp = w83627hf_read_value(client, W83781D_REG_TEMP(1));
+		data->temp_max =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_OVER(1));
+		data->temp_max_hyst =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_HYST(1));
+		data->temp_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP(2));
+		data->temp_max_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_OVER(2));
+		data->temp_max_hyst_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_HYST(2));
+		if (data->type != w83697hf) {
+			data->temp_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP(3));
+			data->temp_max_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP_OVER(3));
+			data->temp_max_hyst_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP_HYST(3));
+		}
+
+		i = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		if (data->type != w83697hf) {
+			data->fan_div[2] = (w83627hf_read_value(client,
+					       W83781D_REG_PIN) >> 6) & 0x03;
+		}
+		i = w83627hf_read_value(client, W83781D_REG_VBAT);
+		data->fan_div[0] |= (i >> 3) & 0x04;
+		data->fan_div[1] |= (i >> 4) & 0x04;
+		if (data->type != w83697hf)
+			data->fan_div[2] |= (i >> 5) & 0x04;
+		data->alarms =
+		    w83627hf_read_value(client, W83781D_REG_ALARM1) |
+		    (w83627hf_read_value(client, W83781D_REG_ALARM2) << 8) |
+		    (w83627hf_read_value(client, W83781D_REG_ALARM3) << 16);
+		i = w83627hf_read_value(client, W83781D_REG_BEEP_INTS2);
+		data->beep_enable = i >> 7;
+		data->beep_mask = ((i & 0x7f) << 8) |
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS1) |
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS3) << 16;
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_w83627hf_init(void)
+{
+	int addr;
+
+	if (w83627hf_find(0x2e, &addr)
+	 && w83627hf_find(0x4e, &addr)) {
+		return -ENODEV;
+	}
+	normal_isa[0] = addr;
+
+	return i2c_add_driver(&w83627hf_driver);
+}
+
+static void __exit sensors_w83627hf_exit(void)
+{
+	i2c_del_driver(&w83627hf_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	      "Philip Edelbrock <phil@netroedge.com>, "
+	      "and Mark Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("W83627HF driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83627hf_init);
+module_exit(sensors_w83627hf_exit);
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
new file mode 100644
index 000000000000..0bb131ce09eb
--- /dev/null
+++ b/drivers/hwmon/w83781d.c
@@ -0,0 +1,1632 @@
+/*
+    w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>,
+    and Mark Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    Supports following chips:
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    as99127f	7	3	0	3	0x31	0x12c3	yes	no
+    as99127f rev.2 (type_name = as99127f)	0x31	0x5ca3	yes	no
+    w83781d	7	3	0	3	0x10-1	0x5ca3	yes	yes
+    w83627hf	9	3	2	3	0x21	0x5ca3	yes	yes(LPC)
+    w83782d	9	3	2-4	3	0x30	0x5ca3	yes	yes
+    w83783s	5-6	3	2	1-2	0x40	0x5ca3	yes	no
+
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
+					0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
+					0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+		    "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int init = 1;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+/* Constants specified below */
+
+/* Length of ISA address segment */
+#define W83781D_EXTENT			8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define W83781D_ADDR_REG_OFFSET		5
+#define W83781D_DATA_REG_OFFSET		6
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr)		((nr < 7) ? (0x2b + (nr) * 2) : \
+						    (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr)		((nr < 7) ? (0x2c + (nr) * 2) : \
+						    (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr)		((nr < 7) ? (0x20 + (nr)) : \
+						    (0x550 + (nr) - 7))
+
+#define W83781D_REG_FAN_MIN(nr)		(0x3a + (nr))
+#define W83781D_REG_FAN(nr)		(0x27 + (nr))
+
+#define W83781D_REG_BANK		0x4E
+#define W83781D_REG_TEMP2_CONFIG	0x152
+#define W83781D_REG_TEMP3_CONFIG	0x252
+#define W83781D_REG_TEMP(nr)		((nr == 3) ? (0x0250) : \
+					((nr == 2) ? (0x0150) : \
+						     (0x27)))
+#define W83781D_REG_TEMP_HYST(nr)	((nr == 3) ? (0x253) : \
+					((nr == 2) ? (0x153) : \
+						     (0x3A)))
+#define W83781D_REG_TEMP_OVER(nr)	((nr == 3) ? (0x255) : \
+					((nr == 2) ? (0x155) : \
+						     (0x39)))
+
+#define W83781D_REG_CONFIG		0x40
+#define W83781D_REG_ALARM1		0x41
+#define W83781D_REG_ALARM2		0x42
+#define W83781D_REG_ALARM3		0x450	/* not on W83781D */
+
+#define W83781D_REG_IRQ			0x4C
+#define W83781D_REG_BEEP_CONFIG		0x4D
+#define W83781D_REG_BEEP_INTS1		0x56
+#define W83781D_REG_BEEP_INTS2		0x57
+#define W83781D_REG_BEEP_INTS3		0x453	/* not on W83781D */
+
+#define W83781D_REG_VID_FANDIV		0x47
+
+#define W83781D_REG_CHIPID		0x49
+#define W83781D_REG_WCHIPID		0x58
+#define W83781D_REG_CHIPMAN		0x4F
+#define W83781D_REG_PIN			0x4B
+
+/* 782D/783S only */
+#define W83781D_REG_VBAT		0x5D
+
+/* PWM 782D (1-4) and 783S (1-2) only */
+#define W83781D_REG_PWM1		0x5B	/* 782d and 783s/627hf datasheets disagree */
+						/* on which is which; */
+#define W83781D_REG_PWM2		0x5A	/* We follow the 782d convention here, */
+						/* However 782d is probably wrong. */
+#define W83781D_REG_PWM3		0x5E
+#define W83781D_REG_PWM4		0x5F
+#define W83781D_REG_PWMCLK12		0x5C
+#define W83781D_REG_PWMCLK34		0x45C
+static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2,
+	W83781D_REG_PWM3, W83781D_REG_PWM4
+};
+
+#define W83781D_REG_PWM(nr)		(regpwm[(nr) - 1])
+
+#define W83781D_REG_I2C_ADDR		0x48
+#define W83781D_REG_I2C_SUBADDR		0x4A
+
+/* The following are undocumented in the data sheets however we
+   received the information in an email from Winbond tech support */
+/* Sensor selection - not on 781d */
+#define W83781D_REG_SCFG1		0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+
+#define W83781D_REG_SCFG2		0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+
+#define W83781D_DEFAULT_BETA		3435
+
+/* RT Table registers */
+#define W83781D_REG_RT_IDX		0x50
+#define W83781D_REG_RT_VAL		0x51
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+#define IN_TO_REG(val)			(SENSORS_LIMIT((((val) * 10 + 8)/16),0,255))
+#define IN_FROM_REG(val)		(((val) * 16) / 10)
+
+static inline u8
+FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+#define FAN_FROM_REG(val,div)		((val) == 0   ? -1 : \
+					((val) == 255 ? 0 : \
+							1350000 / ((val) * (div))))
+
+#define TEMP_TO_REG(val)		(SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
+						: (val)) / 1000, 0, 0xff))
+#define TEMP_FROM_REG(val)		(((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
+
+#define PWM_FROM_REG(val)		(val)
+#define PWM_TO_REG(val)			(SENSORS_LIMIT((val),0,255))
+#define BEEP_MASK_FROM_REG(val,type)	((type) == as99127f ? \
+					 (val) ^ 0x7fff : (val))
+#define BEEP_MASK_TO_REG(val,type)	((type) == as99127f ? \
+					 (~(val)) & 0x7fff : (val) & 0xffffff)
+
+#define BEEP_ENABLE_TO_REG(val)		((val) ? 1 : 0)
+#define BEEP_ENABLE_FROM_REG(val)	((val) ? 1 : 0)
+
+#define DIV_FROM_REG(val)		(1 << (val))
+
+static inline u8
+DIV_TO_REG(long val, enum chips type)
+{
+	int i;
+	val = SENSORS_LIMIT(val, 1,
+			    ((type == w83781d
+			      || type == as99127f) ? 8 : 128)) >> 1;
+	for (i = 0; i < 7; i++) {
+		if (val == 0)
+			break;
+		val >>= 1;
+	}
+	return ((u8) i);
+}
+
+/* There are some complications in a module like this. First off, W83781D chips
+   may be both present on the SMBus and the ISA bus, and we have to handle
+   those cases separately at some places. Second, there might be several
+   W83781D chips available (well, actually, that is probably never done; but
+   it is a clean illustration of how to handle a case like that). Finally,
+   a specific chip may be attached to *both* ISA and SMBus, and we would
+   not like to detect it double. Fortunately, in the case of the W83781D at
+   least, a register tells us what SMBus address we are on, so that helps
+   a bit - except if there could be more than one SMBus. Groan. No solution
+   for this yet. */
+
+/* This module may seem overly long and complicated. In fact, it is not so
+   bad. Quite a lot of bookkeeping is done. A real driver can often cut
+   some corners. */
+
+/* For each registered W83781D, we need to keep some data in memory. That
+   data is pointed to by w83781d_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new w83781d client is
+   allocated. */
+struct w83781d_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	struct i2c_client *lm75[2];	/* for secondary I2C addresses */
+	/* array of 2 pointers to subclients */
+
+	u8 in[9];		/* Register value - 8 & 9 for 782D only */
+	u8 in_max[9];		/* Register value - 8 & 9 for 782D only */
+	u8 in_min[9];		/* Register value - 8 & 9 for 782D only */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 temp;
+	u8 temp_max;		/* Register value */
+	u8 temp_max_hyst;	/* Register value */
+	u16 temp_add[2];	/* Register value */
+	u16 temp_max_add[2];	/* Register value */
+	u16 temp_max_hyst_add[2];	/* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	u32 alarms;		/* Register encoding, combined */
+	u32 beep_mask;		/* Register encoding, combined */
+	u8 beep_enable;		/* Boolean */
+	u8 pwm[4];		/* Register value */
+	u8 pwmenable[4];	/* Boolean */
+	u16 sens[3];		/* 782D/783S only.
+				   1 = pentium diode; 2 = 3904 diode;
+				   3000-5000 = thermistor beta.
+				   Default = 3435. 
+				   Other Betas unimplemented */
+	u8 vrm;
+};
+
+static int w83781d_attach_adapter(struct i2c_adapter *adapter);
+static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
+static int w83781d_detach_client(struct i2c_client *client);
+
+static int w83781d_read_value(struct i2c_client *client, u16 register);
+static int w83781d_write_value(struct i2c_client *client, u16 register,
+			       u16 value);
+static struct w83781d_data *w83781d_update_device(struct device *dev);
+static void w83781d_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83781d_driver = {
+	.owner = THIS_MODULE,
+	.name = "w83781d",
+	.id = I2C_DRIVERID_W83781D,
+	.flags = I2C_DF_NOTIFY,
+	.attach_adapter = w83781d_attach_adapter,
+	.detach_client = w83781d_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83781d_data *data = w83781d_update_device(dev); \
+	return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr] * 10)); \
+}
+show_in_reg(in);
+show_in_reg(in_min);
+show_in_reg(in_max);
+
+#define store_in_reg(REG, reg) \
+static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83781d_data *data = i2c_get_clientdata(client); \
+	u32 val; \
+	 \
+	val = simple_strtoul(buf, NULL, 10) / 10; \
+	 \
+	down(&data->update_lock); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
+	 \
+	up(&data->update_lock); \
+	return count; \
+}
+store_in_reg(MIN, min);
+store_in_reg(MAX, max);
+
+#define sysfs_in_offset(offset) \
+static ssize_t \
+show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+        return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
+
+#define sysfs_in_reg_offset(reg, offset) \
+static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_in_##reg (dev, buf, offset); \
+} \
+static ssize_t store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	return store_in_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_in_##reg##offset, store_regs_in_##reg##offset);
+
+#define sysfs_in_offsets(offset) \
+sysfs_in_offset(offset); \
+sysfs_in_reg_offset(min, offset); \
+sysfs_in_reg_offset(max, offset);
+
+sysfs_in_offsets(0);
+sysfs_in_offsets(1);
+sysfs_in_offsets(2);
+sysfs_in_offsets(3);
+sysfs_in_offsets(4);
+sysfs_in_offsets(5);
+sysfs_in_offsets(6);
+sysfs_in_offsets(7);
+sysfs_in_offsets(8);
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83781d_data *data = w83781d_update_device(dev); \
+	return sprintf(buf,"%ld\n", \
+		FAN_FROM_REG(data->reg[nr-1], (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+}
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr - 1] =
+	    FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
+	w83781d_write_value(client, W83781D_REG_FAN_MIN(nr),
+			    data->fan_min[nr - 1]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan(dev, buf, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan_min(dev, buf, offset); \
+} \
+static ssize_t store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	return store_fan_min(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, show_regs_fan_min##offset, store_regs_fan_min##offset);
+
+sysfs_fan_offset(1);
+sysfs_fan_min_offset(1);
+sysfs_fan_offset(2);
+sysfs_fan_min_offset(2);
+sysfs_fan_offset(3);
+sysfs_fan_min_offset(3);
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+} while (0)
+
+#define show_temp_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct w83781d_data *data = w83781d_update_device(dev); \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		return sprintf(buf,"%d\n", \
+			LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
+	} else {	/* TEMP1 */ \
+		return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+	} \
+}
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_max_hyst);
+
+#define store_temp_reg(REG, reg) \
+static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83781d_data *data = i2c_get_clientdata(client); \
+	s32 val; \
+	 \
+	val = simple_strtol(buf, NULL, 10); \
+	 \
+	down(&data->update_lock); \
+	 \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
+		w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+				data->temp_##reg##_add[nr-2]); \
+	} else {	/* TEMP1 */ \
+		data->temp_##reg = TEMP_TO_REG(val); \
+		w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+			data->temp_##reg); \
+	} \
+	 \
+	up(&data->update_lock); \
+	return count; \
+}
+store_temp_reg(OVER, max);
+store_temp_reg(HYST, max_hyst);
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp(dev, buf, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp_##reg (dev, buf, offset); \
+} \
+static ssize_t store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	return store_temp_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
+
+#define sysfs_temp_offsets(offset) \
+sysfs_temp_offset(offset); \
+sysfs_temp_reg_offset(max, offset); \
+sysfs_temp_reg_offset(max_hyst, offset);
+
+sysfs_temp_offsets(1);
+sysfs_temp_offsets(2);
+sysfs_temp_offsets(3);
+
+#define device_create_file_temp(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
+} while (0)
+
+static ssize_t
+show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+
+static
+DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid);
+static ssize_t
+show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+
+static ssize_t
+store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+
+	return count;
+}
+
+static
+DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm);
+static ssize_t
+show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static
+DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms);
+static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n",
+		       (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
+}
+static ssize_t show_beep_enable (struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n",
+		       (long)BEEP_ENABLE_FROM_REG(data->beep_enable));
+}
+
+#define BEEP_ENABLE			0	/* Store beep_enable */
+#define BEEP_MASK			1	/* Store beep_mask */
+
+static ssize_t
+store_beep_reg(struct device *dev, const char *buf, size_t count,
+	       int update_mask)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val, val2;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	if (update_mask == BEEP_MASK) {	/* We are storing beep_mask */
+		data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
+		w83781d_write_value(client, W83781D_REG_BEEP_INTS1,
+				    data->beep_mask & 0xff);
+
+		if ((data->type != w83781d) && (data->type != as99127f)) {
+			w83781d_write_value(client, W83781D_REG_BEEP_INTS3,
+					    ((data->beep_mask) >> 16) & 0xff);
+		}
+
+		val2 = (data->beep_mask >> 8) & 0x7f;
+	} else {		/* We are storing beep_enable */
+		val2 = w83781d_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
+		data->beep_enable = BEEP_ENABLE_TO_REG(val);
+	}
+
+	w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
+			    val2 | data->beep_enable << 7);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_beep(REG, reg) \
+static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_beep_##reg(dev, attr, buf); \
+} \
+static ssize_t store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	return store_beep_reg(dev, buf, count, BEEP_##REG); \
+} \
+static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_regs_beep_##reg);
+
+sysfs_beep(ENABLE, enable);
+sysfs_beep(MASK, mask);
+
+#define device_create_file_beep(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask); \
+} while (0)
+
+static ssize_t
+show_fan_div_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n",
+		       (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t
+store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	u8 reg;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	
+	/* Save fan_min */
+	min = FAN_FROM_REG(data->fan_min[nr],
+			   DIV_FROM_REG(data->fan_div[nr]));
+
+	data->fan_div[nr] = DIV_TO_REG(val, data->type);
+
+	reg = (w83781d_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+	       & (nr==0 ? 0xcf : 0x3f))
+	    | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
+	w83781d_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+
+	/* w83781d and as99127f don't have extended divisor bits */
+	if (data->type != w83781d && data->type != as99127f) {
+		reg = (w83781d_read_value(client, W83781D_REG_VBAT)
+		       & ~(1 << (5 + nr)))
+		    | ((data->fan_div[nr] & 0x04) << (3 + nr));
+		w83781d_write_value(client, W83781D_REG_VBAT, reg);
+	}
+
+	/* Restore fan_min */
+	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_fan_div(offset) \
+static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan_div_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+	return store_fan_div_reg(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, show_regs_fan_div_##offset, store_regs_fan_div_##offset);
+
+sysfs_fan_div(1);
+sysfs_fan_div(2);
+sysfs_fan_div(3);
+
+#define device_create_file_fan_div(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+static ssize_t
+show_pwm_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr - 1]));
+}
+
+static ssize_t
+show_pwmenable_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->pwmenable[nr - 1]);
+}
+
+static ssize_t
+store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm[nr - 1] = PWM_TO_REG(val);
+	w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val, reg;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	switch (val) {
+	case 0:
+	case 1:
+		reg = w83781d_read_value(client, W83781D_REG_PWMCLK12);
+		w83781d_write_value(client, W83781D_REG_PWMCLK12,
+				    (reg & 0xf7) | (val << 3));
+
+		reg = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
+		w83781d_write_value(client, W83781D_REG_BEEP_CONFIG,
+				    (reg & 0xef) | (!val << 4));
+
+		data->pwmenable[nr - 1] = val;
+		break;
+
+	default:
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_pwm(offset) \
+static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_pwm_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	return store_pwm_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+		show_regs_pwm_##offset, store_regs_pwm_##offset);
+
+#define sysfs_pwmenable(offset) \
+static ssize_t show_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_pwmenable_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	return store_pwmenable_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+		show_regs_pwmenable_##offset, store_regs_pwmenable_##offset);
+
+sysfs_pwm(1);
+sysfs_pwm(2);
+sysfs_pwmenable(2);		/* only PWM2 can be enabled/disabled */
+sysfs_pwm(3);
+sysfs_pwm(4);
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset); \
+} while (0)
+
+#define device_create_file_pwmenable(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \
+} while (0)
+
+static ssize_t
+show_sensor_reg(struct device *dev, char *buf, int nr)
+{
+	struct w83781d_data *data = w83781d_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+}
+
+static ssize_t
+store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	u32 val, tmp;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+
+	switch (val) {
+	case 1:		/* PII/Celeron diode */
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+		w83781d_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
+		w83781d_write_value(client, W83781D_REG_SCFG2,
+				    tmp | BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case 2:		/* 3904 */
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+		w83781d_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
+		w83781d_write_value(client, W83781D_REG_SCFG2,
+				    tmp & ~BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case W83781D_DEFAULT_BETA:	/* thermistor */
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+		w83781d_write_value(client, W83781D_REG_SCFG1,
+				    tmp & ~BIT_SCFG1[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	default:
+		dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n",
+		       (long) val, W83781D_DEFAULT_BETA);
+		break;
+	}
+
+	up(&data->update_lock);
+	return count;
+}
+
+#define sysfs_sensor(offset) \
+static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+    return show_sensor_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+    return store_sensor_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset);
+
+sysfs_sensor(1);
+sysfs_sensor(2);
+sysfs_sensor(3);
+
+#define device_create_file_sensor(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
+} while (0)
+
+/* This function is called when:
+     * w83781d_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and w83781d_driver is still present) */
+static int
+w83781d_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, w83781d_detect);
+}
+
+/* Assumes that adapter is of I2C, not ISA variety.
+ * OTHERWISE DON'T CALL THIS
+ */
+static int
+w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
+		struct i2c_client *new_client)
+{
+	int i, val1 = 0, id;
+	int err;
+	const char *client_name = "";
+	struct w83781d_data *data = i2c_get_clientdata(new_client);
+
+	data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(data->lm75[0])) {
+		err = -ENOMEM;
+		goto ERROR_SC_0;
+	}
+	memset(data->lm75[0], 0x00, sizeof (struct i2c_client));
+
+	id = i2c_adapter_id(adapter);
+
+	if (force_subclients[0] == id && force_subclients[1] == address) {
+		for (i = 2; i <= 3; i++) {
+			if (force_subclients[i] < 0x48 ||
+			    force_subclients[i] > 0x4f) {
+				dev_err(&new_client->dev, "Invalid subclient "
+					"address %d; must be 0x48-0x4f\n",
+					force_subclients[i]);
+				err = -EINVAL;
+				goto ERROR_SC_1;
+			}
+		}
+		w83781d_write_value(new_client, W83781D_REG_I2C_SUBADDR,
+				(force_subclients[2] & 0x07) |
+				((force_subclients[3] & 0x07) << 4));
+		data->lm75[0]->addr = force_subclients[2];
+	} else {
+		val1 = w83781d_read_value(new_client, W83781D_REG_I2C_SUBADDR);
+		data->lm75[0]->addr = 0x48 + (val1 & 0x07);
+	}
+
+	if (kind != w83783s) {
+
+		data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+		if (!(data->lm75[1])) {
+			err = -ENOMEM;
+			goto ERROR_SC_1;
+		}
+		memset(data->lm75[1], 0x0, sizeof(struct i2c_client));
+
+		if (force_subclients[0] == id &&
+		    force_subclients[1] == address) {
+			data->lm75[1]->addr = force_subclients[3];
+		} else {
+			data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07);
+		}
+		if (data->lm75[0]->addr == data->lm75[1]->addr) {
+			dev_err(&new_client->dev,
+			       "Duplicate addresses 0x%x for subclients.\n",
+			       data->lm75[0]->addr);
+			err = -EBUSY;
+			goto ERROR_SC_2;
+		}
+	}
+
+	if (kind == w83781d)
+		client_name = "w83781d subclient";
+	else if (kind == w83782d)
+		client_name = "w83782d subclient";
+	else if (kind == w83783s)
+		client_name = "w83783s subclient";
+	else if (kind == w83627hf)
+		client_name = "w83627hf subclient";
+	else if (kind == as99127f)
+		client_name = "as99127f subclient";
+
+	for (i = 0; i <= 1; i++) {
+		/* store all data in w83781d */
+		i2c_set_clientdata(data->lm75[i], NULL);
+		data->lm75[i]->adapter = adapter;
+		data->lm75[i]->driver = &w83781d_driver;
+		data->lm75[i]->flags = 0;
+		strlcpy(data->lm75[i]->name, client_name,
+			I2C_NAME_SIZE);
+		if ((err = i2c_attach_client(data->lm75[i]))) {
+			dev_err(&new_client->dev, "Subclient %d "
+				"registration at address 0x%x "
+				"failed.\n", i, data->lm75[i]->addr);
+			if (i == 1)
+				goto ERROR_SC_3;
+			goto ERROR_SC_2;
+		}
+		if (kind == w83783s)
+			break;
+	}
+
+	return 0;
+
+/* Undo inits in case of errors */
+ERROR_SC_3:
+	i2c_detach_client(data->lm75[0]);
+ERROR_SC_2:
+	if (NULL != data->lm75[1])
+		kfree(data->lm75[1]);
+ERROR_SC_1:
+	if (NULL != data->lm75[0])
+		kfree(data->lm75[0]);
+ERROR_SC_0:
+	return err;
+}
+
+static int
+w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i = 0, val1 = 0, val2;
+	struct i2c_client *new_client;
+	struct w83781d_data *data;
+	int err;
+	const char *client_name = "";
+	int is_isa = i2c_is_isa_adapter(adapter);
+	enum vendor { winbond, asus } vendid;
+
+	if (!is_isa
+	    && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		err = -EINVAL;
+		goto ERROR0;
+	}
+
+	/* Prevent users from forcing a kind for a bus it isn't supposed
+	   to possibly be on */
+	if (is_isa && (kind == as99127f || kind == w83783s)) {
+		dev_err(&adapter->dev,
+			"Cannot force I2C-only chip for ISA address 0x%02x.\n",
+			address);
+		err = -EINVAL;
+		goto ERROR0;
+	}
+	
+	if (is_isa)
+		if (!request_region(address, W83781D_EXTENT,
+				    w83781d_driver.name)) {
+			dev_dbg(&adapter->dev, "Request of region "
+				"0x%x-0x%x for w83781d failed\n", address,
+				address + W83781D_EXTENT - 1);
+			err = -EBUSY;
+			goto ERROR0;
+		}
+
+	/* Probe whether there is anything available on this address. Already
+	   done for SMBus clients */
+	if (kind < 0) {
+		if (is_isa) {
+
+#define REALLY_SLOW_IO
+			/* We need the timeouts for at least some LM78-like
+			   chips. But only if we read 'undefined' registers. */
+			i = inb_p(address + 1);
+			if (inb_p(address + 2) != i
+			 || inb_p(address + 3) != i
+			 || inb_p(address + 7) != i) {
+				dev_dbg(&adapter->dev, "Detection of w83781d "
+					"chip failed at step 1\n");
+				err = -ENODEV;
+				goto ERROR1;
+			}
+#undef REALLY_SLOW_IO
+
+			/* Let's just hope nothing breaks here */
+			i = inb_p(address + 5) & 0x7f;
+			outb_p(~i & 0x7f, address + 5);
+			val2 = inb_p(address + 5) & 0x7f;
+			if (val2 != (~i & 0x7f)) {
+				outb_p(i, address + 5);
+				dev_dbg(&adapter->dev, "Detection of w83781d "
+					"chip failed at step 2 (0x%x != "
+					"0x%x at 0x%x)\n", val2, ~i & 0x7f,
+					address + 5);
+				err = -ENODEV;
+				goto ERROR1;
+			}
+		}
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access w83781d_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+	memset(data, 0, sizeof(struct w83781d_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &w83781d_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	/* The w8378?d may be stuck in some other bank than bank 0. This may
+	   make reading other information impossible. Specify a force=... or
+	   force_*=... parameter, and the Winbond will be reset to the right
+	   bank. */
+	if (kind < 0) {
+		if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) {
+			dev_dbg(&new_client->dev, "Detection failed at step "
+				"3\n");
+			err = -ENODEV;
+			goto ERROR2;
+		}
+		val1 = w83781d_read_value(new_client, W83781D_REG_BANK);
+		val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+		/* Check for Winbond or Asus ID if in bank 0 */
+		if ((!(val1 & 0x07)) &&
+		    (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
+		     || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
+			dev_dbg(&new_client->dev, "Detection failed at step "
+				"4\n");
+			err = -ENODEV;
+			goto ERROR2;
+		}
+		/* If Winbond SMBus, check address at 0x48.
+		   Asus doesn't support, except for as99127f rev.2 */
+		if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) ||
+				  ((val1 & 0x80) && (val2 == 0x5c)))) {
+			if (w83781d_read_value
+			    (new_client, W83781D_REG_I2C_ADDR) != address) {
+				dev_dbg(&new_client->dev, "Detection failed "
+					"at step 5\n");
+				err = -ENODEV;
+				goto ERROR2;
+			}
+		}
+	}
+
+	/* We have either had a force parameter, or we have already detected the
+	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
+	w83781d_write_value(new_client, W83781D_REG_BANK,
+			    (w83781d_read_value(new_client,
+						W83781D_REG_BANK) & 0x78) |
+			    0x80);
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		/* get vendor ID */
+		val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+		if (val2 == 0x5c)
+			vendid = winbond;
+		else if (val2 == 0x12)
+			vendid = asus;
+		else {
+			dev_dbg(&new_client->dev, "Chip was made by neither "
+				"Winbond nor Asus?\n");
+			err = -ENODEV;
+			goto ERROR2;
+		}
+
+		val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID);
+		if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
+			kind = w83781d;
+		else if (val1 == 0x30 && vendid == winbond)
+			kind = w83782d;
+		else if (val1 == 0x40 && vendid == winbond && !is_isa
+				&& address == 0x2d)
+			kind = w83783s;
+		else if (val1 == 0x21 && vendid == winbond)
+			kind = w83627hf;
+		else if (val1 == 0x31 && !is_isa && address >= 0x28)
+			kind = as99127f;
+		else {
+			if (kind == 0)
+				dev_warn(&new_client->dev, "Ignoring 'force' "
+					 "parameter for unknown chip at "
+					 "adapter %d, address 0x%02x\n",
+					 i2c_adapter_id(adapter), address);
+			err = -EINVAL;
+			goto ERROR2;
+		}
+	}
+
+	if (kind == w83781d) {
+		client_name = "w83781d";
+	} else if (kind == w83782d) {
+		client_name = "w83782d";
+	} else if (kind == w83783s) {
+		client_name = "w83783s";
+	} else if (kind == w83627hf) {
+		client_name = "w83627hf";
+	} else if (kind == as99127f) {
+		client_name = "as99127f";
+	}
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+	data->type = kind;
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	/* attach secondary i2c lm75-like clients */
+	if (!is_isa) {
+		if ((err = w83781d_detect_subclients(adapter, address,
+				kind, new_client)))
+			goto ERROR3;
+	} else {
+		data->lm75[0] = NULL;
+		data->lm75[1] = NULL;
+	}
+
+	/* Initialize the chip */
+	w83781d_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 1; i <= 3; i++) {
+		data->fan_min[i - 1] = w83781d_read_value(new_client,
+					W83781D_REG_FAN_MIN(i));
+	}
+	if (kind != w83781d && kind != as99127f)
+		for (i = 0; i < 4; i++)
+			data->pwmenable[i] = 1;
+
+	/* Register sysfs hooks */
+	device_create_file_in(new_client, 0);
+	if (kind != w83783s)
+		device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	device_create_file_in(new_client, 4);
+	device_create_file_in(new_client, 5);
+	device_create_file_in(new_client, 6);
+	if (kind != as99127f && kind != w83781d && kind != w83783s) {
+		device_create_file_in(new_client, 7);
+		device_create_file_in(new_client, 8);
+	}
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	if (kind != w83783s)
+		device_create_file_temp(new_client, 3);
+
+	device_create_file_vid(new_client);
+	device_create_file_vrm(new_client);
+
+	device_create_file_fan_div(new_client, 1);
+	device_create_file_fan_div(new_client, 2);
+	device_create_file_fan_div(new_client, 3);
+
+	device_create_file_alarms(new_client);
+
+	device_create_file_beep(new_client);
+
+	if (kind != w83781d && kind != as99127f) {
+		device_create_file_pwm(new_client, 1);
+		device_create_file_pwm(new_client, 2);
+		device_create_file_pwmenable(new_client, 2);
+	}
+	if (kind == w83782d && !is_isa) {
+		device_create_file_pwm(new_client, 3);
+		device_create_file_pwm(new_client, 4);
+	}
+
+	if (kind != as99127f && kind != w83781d) {
+		device_create_file_sensor(new_client, 1);
+		device_create_file_sensor(new_client, 2);
+		if (kind != w83783s)
+			device_create_file_sensor(new_client, 3);
+	}
+
+	return 0;
+
+ERROR3:
+	i2c_detach_client(new_client);
+ERROR2:
+	kfree(data);
+ERROR1:
+	if (is_isa)
+		release_region(address, W83781D_EXTENT);
+ERROR0:
+	return err;
+}
+
+static int
+w83781d_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if (i2c_is_isa_client(client))
+		release_region(client->addr, W83781D_EXTENT);
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		       "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	if (i2c_get_clientdata(client)==NULL) {
+		/* subclients */
+		kfree(client);
+	} else {
+		/* main client */
+		kfree(i2c_get_clientdata(client));
+	}
+
+	return 0;
+}
+
+/* The SMBus locks itself, usually, but nothing may access the Winbond between
+   bank switches. ISA access must always be locked explicitly! 
+   We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the W83781D access and should not be necessary. 
+   There are some ugly typecasts here, but the good news is - they should
+   nowhere else be necessary! */
+static int
+w83781d_read_value(struct i2c_client *client, u16 reg)
+{
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	int res, word_sized, bank;
+	struct i2c_client *cl;
+
+	down(&data->lock);
+	if (i2c_is_isa_client(client)) {
+		word_sized = (((reg & 0xff00) == 0x100)
+			      || ((reg & 0xff00) == 0x200))
+		    && (((reg & 0x00ff) == 0x50)
+			|| ((reg & 0x00ff) == 0x53)
+			|| ((reg & 0x00ff) == 0x55));
+		if (reg & 0xff00) {
+			outb_p(W83781D_REG_BANK,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			outb_p(reg >> 8,
+			       client->addr + W83781D_DATA_REG_OFFSET);
+		}
+		outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+		res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
+		if (word_sized) {
+			outb_p((reg & 0xff) + 1,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			res =
+			    (res << 8) + inb_p(client->addr +
+					       W83781D_DATA_REG_OFFSET);
+		}
+		if (reg & 0xff00) {
+			outb_p(W83781D_REG_BANK,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+		}
+	} else {
+		bank = (reg >> 8) & 0x0f;
+		if (bank > 2)
+			/* switch banks */
+			i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+						  bank);
+		if (bank == 0 || bank > 2) {
+			res = i2c_smbus_read_byte_data(client, reg & 0xff);
+		} else {
+			/* switch to subclient */
+			cl = data->lm75[bank - 1];
+			/* convert from ISA to LM75 I2C addresses */
+			switch (reg & 0xff) {
+			case 0x50:	/* TEMP */
+				res = swab16(i2c_smbus_read_word_data(cl, 0));
+				break;
+			case 0x52:	/* CONFIG */
+				res = i2c_smbus_read_byte_data(cl, 1);
+				break;
+			case 0x53:	/* HYST */
+				res = swab16(i2c_smbus_read_word_data(cl, 2));
+				break;
+			case 0x55:	/* OVER */
+			default:
+				res = swab16(i2c_smbus_read_word_data(cl, 3));
+				break;
+			}
+		}
+		if (bank > 2)
+			i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+	}
+	up(&data->lock);
+	return res;
+}
+
+static int
+w83781d_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	int word_sized, bank;
+	struct i2c_client *cl;
+
+	down(&data->lock);
+	if (i2c_is_isa_client(client)) {
+		word_sized = (((reg & 0xff00) == 0x100)
+			      || ((reg & 0xff00) == 0x200))
+		    && (((reg & 0x00ff) == 0x53)
+			|| ((reg & 0x00ff) == 0x55));
+		if (reg & 0xff00) {
+			outb_p(W83781D_REG_BANK,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			outb_p(reg >> 8,
+			       client->addr + W83781D_DATA_REG_OFFSET);
+		}
+		outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+		if (word_sized) {
+			outb_p(value >> 8,
+			       client->addr + W83781D_DATA_REG_OFFSET);
+			outb_p((reg & 0xff) + 1,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+		}
+		outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET);
+		if (reg & 0xff00) {
+			outb_p(W83781D_REG_BANK,
+			       client->addr + W83781D_ADDR_REG_OFFSET);
+			outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+		}
+	} else {
+		bank = (reg >> 8) & 0x0f;
+		if (bank > 2)
+			/* switch banks */
+			i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+						  bank);
+		if (bank == 0 || bank > 2) {
+			i2c_smbus_write_byte_data(client, reg & 0xff,
+						  value & 0xff);
+		} else {
+			/* switch to subclient */
+			cl = data->lm75[bank - 1];
+			/* convert from ISA to LM75 I2C addresses */
+			switch (reg & 0xff) {
+			case 0x52:	/* CONFIG */
+				i2c_smbus_write_byte_data(cl, 1, value & 0xff);
+				break;
+			case 0x53:	/* HYST */
+				i2c_smbus_write_word_data(cl, 2, swab16(value));
+				break;
+			case 0x55:	/* OVER */
+				i2c_smbus_write_word_data(cl, 3, swab16(value));
+				break;
+			}
+		}
+		if (bank > 2)
+			i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+	}
+	up(&data->lock);
+	return 0;
+}
+
+/* Called when we have found a new W83781D. It should set limits, etc. */
+static void
+w83781d_init_client(struct i2c_client *client)
+{
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	int i, p;
+	int type = data->type;
+	u8 tmp;
+
+	if (init && type != as99127f) {	/* this resets registers we don't have
+					   documentation for on the as99127f */
+		/* save these registers */
+		i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
+		p = w83781d_read_value(client, W83781D_REG_PWMCLK12);
+		/* Reset all except Watchdog values and last conversion values
+		   This sets fan-divs to 2, among others */
+		w83781d_write_value(client, W83781D_REG_CONFIG, 0x80);
+		/* Restore the registers and disable power-on abnormal beep.
+		   This saves FAN 1/2/3 input/output values set by BIOS. */
+		w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+		w83781d_write_value(client, W83781D_REG_PWMCLK12, p);
+		/* Disable master beep-enable (reset turns it on).
+		   Individual beep_mask should be reset to off but for some reason
+		   disabling this bit helps some people not get beeped */
+		w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+	}
+
+	data->vrm = i2c_which_vrm();
+
+	if ((type != w83781d) && (type != as99127f)) {
+		tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+		for (i = 1; i <= 3; i++) {
+			if (!(tmp & BIT_SCFG1[i - 1])) {
+				data->sens[i - 1] = W83781D_DEFAULT_BETA;
+			} else {
+				if (w83781d_read_value
+				    (client,
+				     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+					data->sens[i - 1] = 1;
+				else
+					data->sens[i - 1] = 2;
+			}
+			if (type == w83783s && i == 2)
+				break;
+		}
+	}
+
+	if (init && type != as99127f) {
+		/* Enable temp2 */
+		tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG);
+		if (tmp & 0x01) {
+			dev_warn(&client->dev, "Enabling temp2, readings "
+				 "might not make sense\n");
+			w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG,
+				tmp & 0xfe);
+		}
+
+		/* Enable temp3 */
+		if (type != w83783s) {
+			tmp = w83781d_read_value(client,
+				W83781D_REG_TEMP3_CONFIG);
+			if (tmp & 0x01) {
+				dev_warn(&client->dev, "Enabling temp3, "
+					 "readings might not make sense\n");
+				w83781d_write_value(client,
+					W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
+			}
+		}
+
+		if (type != w83781d) {
+			/* enable comparator mode for temp2 and temp3 so
+			   alarm indication will work correctly */
+			i = w83781d_read_value(client, W83781D_REG_IRQ);
+			if (!(i & 0x40))
+				w83781d_write_value(client, W83781D_REG_IRQ,
+						    i | 0x40);
+		}
+	}
+
+	/* Start monitoring */
+	w83781d_write_value(client, W83781D_REG_CONFIG,
+			    (w83781d_read_value(client,
+						W83781D_REG_CONFIG) & 0xf7)
+			    | 0x01);
+}
+
+static struct w83781d_data *w83781d_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83781d_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		dev_dbg(dev, "Starting device update\n");
+
+		for (i = 0; i <= 8; i++) {
+			if (data->type == w83783s && i == 1)
+				continue;	/* 783S has no in1 */
+			data->in[i] =
+			    w83781d_read_value(client, W83781D_REG_IN(i));
+			data->in_min[i] =
+			    w83781d_read_value(client, W83781D_REG_IN_MIN(i));
+			data->in_max[i] =
+			    w83781d_read_value(client, W83781D_REG_IN_MAX(i));
+			if ((data->type != w83782d)
+			    && (data->type != w83627hf) && (i == 6))
+				break;
+		}
+		for (i = 1; i <= 3; i++) {
+			data->fan[i - 1] =
+			    w83781d_read_value(client, W83781D_REG_FAN(i));
+			data->fan_min[i - 1] =
+			    w83781d_read_value(client, W83781D_REG_FAN_MIN(i));
+		}
+		if (data->type != w83781d && data->type != as99127f) {
+			for (i = 1; i <= 4; i++) {
+				data->pwm[i - 1] =
+				    w83781d_read_value(client,
+						       W83781D_REG_PWM(i));
+				if ((data->type != w83782d
+				     || i2c_is_isa_client(client))
+				    && i == 2)
+					break;
+			}
+			/* Only PWM2 can be disabled */
+			data->pwmenable[1] = (w83781d_read_value(client,
+					      W83781D_REG_PWMCLK12) & 0x08) >> 3;
+		}
+
+		data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
+		data->temp_max =
+		    w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
+		data->temp_max_hyst =
+		    w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
+		data->temp_add[0] =
+		    w83781d_read_value(client, W83781D_REG_TEMP(2));
+		data->temp_max_add[0] =
+		    w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
+		data->temp_max_hyst_add[0] =
+		    w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
+		if (data->type != w83783s) {
+			data->temp_add[1] =
+			    w83781d_read_value(client, W83781D_REG_TEMP(3));
+			data->temp_max_add[1] =
+			    w83781d_read_value(client,
+					       W83781D_REG_TEMP_OVER(3));
+			data->temp_max_hyst_add[1] =
+			    w83781d_read_value(client,
+					       W83781D_REG_TEMP_HYST(3));
+		}
+		i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
+		data->vid = i & 0x0f;
+		data->vid |= (w83781d_read_value(client,
+					W83781D_REG_CHIPID) & 0x01) << 4;
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		data->fan_div[2] = (w83781d_read_value(client,
+					W83781D_REG_PIN) >> 6) & 0x03;
+		if ((data->type != w83781d) && (data->type != as99127f)) {
+			i = w83781d_read_value(client, W83781D_REG_VBAT);
+			data->fan_div[0] |= (i >> 3) & 0x04;
+			data->fan_div[1] |= (i >> 4) & 0x04;
+			data->fan_div[2] |= (i >> 5) & 0x04;
+		}
+		data->alarms =
+		    w83781d_read_value(client,
+				       W83781D_REG_ALARM1) +
+		    (w83781d_read_value(client, W83781D_REG_ALARM2) << 8);
+		if ((data->type == w83782d) || (data->type == w83627hf)) {
+			data->alarms |=
+			    w83781d_read_value(client,
+					       W83781D_REG_ALARM3) << 16;
+		}
+		i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
+		data->beep_enable = i >> 7;
+		data->beep_mask = ((i & 0x7f) << 8) +
+		    w83781d_read_value(client, W83781D_REG_BEEP_INTS1);
+		if ((data->type != w83781d) && (data->type != as99127f)) {
+			data->beep_mask |=
+			    w83781d_read_value(client,
+					       W83781D_REG_BEEP_INTS3) << 16;
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init
+sensors_w83781d_init(void)
+{
+	return i2c_add_driver(&w83781d_driver);
+}
+
+static void __exit
+sensors_w83781d_exit(void)
+{
+	i2c_del_driver(&w83781d_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+	      "Philip Edelbrock <phil@netroedge.com>, "
+	      "and Mark Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("W83781D driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83781d_init);
+module_exit(sensors_w83781d_exit);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
new file mode 100644
index 000000000000..4469d52aba4c
--- /dev/null
+++ b/drivers/hwmon/w83l785ts.c
@@ -0,0 +1,328 @@
+/*
+ * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
+ *               monitoring
+ * Copyright (C) 2003-2004  Jean Delvare <khali@linux-fr.org>
+ *
+ * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
+ * by Winbond. It reports a single external temperature with a 1 deg
+ * resolution and a 3 deg accuracy. Datasheet can be obtained from
+ * Winbond's website at:
+ *   http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
+ *
+ * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare
+ * <khali@linux-fr.org>.
+ *
+ * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read
+ * error handling mechanism.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* How many retries on register read error */
+#define MAX_RETRIES	5
+
+/*
+ * Address to scan
+ * Address is fully defined internally and cannot be changed.
+ */
+
+static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(w83l785ts);
+
+/*
+ * The W83L785TS-S registers
+ * Manufacturer ID is 0x5CA3 for Winbond.
+ */
+
+#define W83L785TS_REG_MAN_ID1		0x4D
+#define W83L785TS_REG_MAN_ID2		0x4C
+#define W83L785TS_REG_CHIP_ID		0x4E
+#define W83L785TS_REG_CONFIG		0x40
+#define W83L785TS_REG_TYPE		0x52
+#define W83L785TS_REG_TEMP		0x27
+#define W83L785TS_REG_TEMP_OVER		0x53 /* not sure about this one */
+
+/*
+ * Conversions
+ * The W83L785TS-S uses signed 8-bit values.
+ */
+
+#define TEMP_FROM_REG(val)	((val & 0x80 ? val-0x100 : val) * 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int w83l785ts_attach_adapter(struct i2c_adapter *adapter);
+static int w83l785ts_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static int w83l785ts_detach_client(struct i2c_client *client);
+static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval);
+static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+ 
+static struct i2c_driver w83l785ts_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "w83l785ts",
+	.id		= I2C_DRIVERID_W83L785TS,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= w83l785ts_attach_adapter,
+	.detach_client	= w83l785ts_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct w83l785ts_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 temp, temp_over;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83l785ts_data *data = w83l785ts_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83l785ts_data *data = w83l785ts_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL);
+
+/*
+ * Real code
+ */
+
+static int w83l785ts_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, w83l785ts_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct w83l785ts_data *data;
+	int err = 0;
+
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct w83l785ts_data));
+
+
+	/* The common I2C client data is placed right before the
+	 * W83L785TS-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &w83l785ts_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip (actually there is only
+	 * one possible kind of chip for now, W83L785TS-S). A zero kind means
+	 * that the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+	if (kind < 0) { /* detection */
+		if (((w83l785ts_read_value(new_client,
+		      W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00)
+		 || ((w83l785ts_read_value(new_client,
+		      W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
+			dev_dbg(&adapter->dev,
+				"W83L785TS-S detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+		u16 man_id;
+		u8 chip_id;
+
+		man_id = (w83l785ts_read_value(new_client,
+			 W83L785TS_REG_MAN_ID1, 0) << 8) +
+			 w83l785ts_read_value(new_client,
+			 W83L785TS_REG_MAN_ID2, 0);
+		chip_id = w83l785ts_read_value(new_client,
+			  W83L785TS_REG_CHIP_ID, 0);
+
+		if (man_id == 0x5CA3) { /* Winbond */
+			if (chip_id == 0x70) { /* W83L785TS-S */
+				kind = w83l785ts;			
+			}
+		}
+	
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+				 "Unsupported chip (man_id=0x%04X, "
+				 "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	/* We can fill in the remaining client fields. */
+	strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE);
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Default values in case the first read fails (unlikely). */
+	data->temp_over = data->temp = 0;
+
+	/* Tell the I2C layer a new client has arrived. */
+	if ((err = i2c_attach_client(new_client))) 
+		goto exit_free;
+
+	/*
+	 * Initialize the W83L785TS chip
+	 * Nothing yet, assume it is already started.
+	 */
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int w83l785ts_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
+{
+	int value, i;
+
+	/* Frequent read errors have been reported on Asus boards, so we
+	 * retry on read errors. If it still fails (unlikely), return the
+	 * default value requested by the caller. */
+	for (i = 1; i <= MAX_RETRIES; i++) {
+		value = i2c_smbus_read_byte_data(client, reg);
+		if (value >= 0) {
+			dev_dbg(&client->dev, "Read 0x%02x from register "
+				"0x%02x.\n", value, reg);
+			return value;
+		}
+		dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i);
+		msleep(i);
+	}
+
+	dev_err(&client->dev, "Couldn't read value from register 0x%02x. "
+		"Please report.\n", reg);
+	return defval;
+}
+
+static struct w83l785ts_data *w83l785ts_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83l785ts_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
+		dev_dbg(&client->dev, "Updating w83l785ts data.\n");
+		data->temp = w83l785ts_read_value(client,
+			     W83L785TS_REG_TEMP, data->temp);
+		data->temp_over = w83l785ts_read_value(client,
+				  W83L785TS_REG_TEMP_OVER, data->temp_over);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_w83l785ts_init(void)
+{
+	return i2c_add_driver(&w83l785ts_driver);
+}
+
+static void __exit sensors_w83l785ts_exit(void)
+{
+	i2c_del_driver(&w83l785ts_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("W83L785TS-S driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83l785ts_init);
+module_exit(sensors_w83l785ts_exit);