Merge tag 'arm-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers

Merge "ARM System Control and Power Interface(SCPI) support" from Sudeep Holla

It adds support for the following features provided by SCP firmware
using different subsystems in Linux:
  1. SCPI mailbox protocol driver which using mailbox framework
  2. Clocks provided by SCP using clock framework
  3. CPU DVFS(cpufreq) using existing arm-big-little driver
  4. SCPI based sensors including temperature sensors

* tag 'arm-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  hwmon: Support thermal zones registration for SCP temperature sensors
  hwmon: Support sensors exported via ARM SCP interface
  firmware: arm_scpi: Extend to support sensors
  Documentation: add DT bindings for ARM SCPI sensors
  cpufreq: arm_big_little: add SCPI interface driver
  clk: scpi: add support for cpufreq virtual device
  clk: add support for clocks provided by SCP(System Control Processor)
  firmware: add support for ARM System Control and Power Interface(SCPI) protocol
  Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol

3 files changed, 297 insertions, 0 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e13c902e8966..50146bb69833 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -321,6 +321,14 @@ config SENSORS_APPLESMC
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of applesmc.
 
+config SENSORS_ARM_SCPI
+	tristate "ARM SCPI Sensors"
+	depends on ARM_SCPI_PROTOCOL
+	help
+	  This driver provides support for temperature, voltage, current
+	  and power sensors available on ARM Ltd's SCP based platforms. The
+	  actual number and type of sensors exported depend on the platform.
+
 config SENSORS_ASB100
 	tristate "Asus ASB100 Bach"
 	depends on X86 && I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 9e0f3dd2841d..66e7a4715da7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
+obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
new file mode 100644
index 000000000000..2c1241bbf9af
--- /dev/null
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -0,0 +1,288 @@
+/*
+ * System Control and Power Interface(SCPI) based hwmon sensor driver
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Punit Agrawal <punit.agrawal@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/scpi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+struct sensor_data {
+	struct scpi_sensor_info info;
+	struct device_attribute dev_attr_input;
+	struct device_attribute dev_attr_label;
+	char input[20];
+	char label[20];
+};
+
+struct scpi_thermal_zone {
+	struct list_head list;
+	int sensor_id;
+	struct scpi_sensors *scpi_sensors;
+	struct thermal_zone_device *tzd;
+};
+
+struct scpi_sensors {
+	struct scpi_ops *scpi_ops;
+	struct sensor_data *data;
+	struct list_head thermal_zones;
+	struct attribute **attrs;
+	struct attribute_group group;
+	const struct attribute_group *groups[2];
+};
+
+static int scpi_read_temp(void *dev, int *temp)
+{
+	struct scpi_thermal_zone *zone = dev;
+	struct scpi_sensors *scpi_sensors = zone->scpi_sensors;
+	struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+	struct sensor_data *sensor = &scpi_sensors->data[zone->sensor_id];
+	u32 value;
+	int ret;
+
+	ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+	if (ret)
+		return ret;
+
+	*temp = value;
+	return 0;
+}
+
+/* hwmon callback functions */
+static ssize_t
+scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct scpi_sensors *scpi_sensors = dev_get_drvdata(dev);
+	struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+	struct sensor_data *sensor;
+	u32 value;
+	int ret;
+
+	sensor = container_of(attr, struct sensor_data, dev_attr_input);
+
+	ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t
+scpi_show_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_data *sensor;
+
+	sensor = container_of(attr, struct sensor_data, dev_attr_label);
+
+	return sprintf(buf, "%s\n", sensor->info.name);
+}
+
+static void
+unregister_thermal_zones(struct platform_device *pdev,
+			 struct scpi_sensors *scpi_sensors)
+{
+	struct list_head *pos;
+
+	list_for_each(pos, &scpi_sensors->thermal_zones) {
+		struct scpi_thermal_zone *zone;
+
+		zone = list_entry(pos, struct scpi_thermal_zone, list);
+		thermal_zone_of_sensor_unregister(&pdev->dev, zone->tzd);
+	}
+}
+
+static struct thermal_zone_of_device_ops scpi_sensor_ops = {
+	.get_temp = scpi_read_temp,
+};
+
+static int scpi_hwmon_probe(struct platform_device *pdev)
+{
+	u16 nr_sensors, i;
+	int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0;
+	struct scpi_ops *scpi_ops;
+	struct device *hwdev, *dev = &pdev->dev;
+	struct scpi_sensors *scpi_sensors;
+	int ret;
+
+	scpi_ops = get_scpi_ops();
+	if (!scpi_ops)
+		return -EPROBE_DEFER;
+
+	ret = scpi_ops->sensor_get_capability(&nr_sensors);
+	if (ret)
+		return ret;
+
+	if (!nr_sensors)
+		return -ENODEV;
+
+	scpi_sensors = devm_kzalloc(dev, sizeof(*scpi_sensors), GFP_KERNEL);
+	if (!scpi_sensors)
+		return -ENOMEM;
+
+	scpi_sensors->data = devm_kcalloc(dev, nr_sensors,
+				   sizeof(*scpi_sensors->data), GFP_KERNEL);
+	if (!scpi_sensors->data)
+		return -ENOMEM;
+
+	scpi_sensors->attrs = devm_kcalloc(dev, (nr_sensors * 2) + 1,
+				   sizeof(*scpi_sensors->attrs), GFP_KERNEL);
+	if (!scpi_sensors->attrs)
+		return -ENOMEM;
+
+	scpi_sensors->scpi_ops = scpi_ops;
+
+	for (i = 0; i < nr_sensors; i++) {
+		struct sensor_data *sensor = &scpi_sensors->data[i];
+
+		ret = scpi_ops->sensor_get_info(i, &sensor->info);
+		if (ret)
+			return ret;
+
+		switch (sensor->info.class) {
+		case TEMPERATURE:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "temp%d_input", num_temp + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "temp%d_label", num_temp + 1);
+			num_temp++;
+			break;
+		case VOLTAGE:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "in%d_input", num_volt);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "in%d_label", num_volt);
+			num_volt++;
+			break;
+		case CURRENT:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "curr%d_input", num_current + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "curr%d_label", num_current + 1);
+			num_current++;
+			break;
+		case POWER:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "power%d_input", num_power + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "power%d_label", num_power + 1);
+			num_power++;
+			break;
+		default:
+			break;
+		}
+
+		sensor->dev_attr_input.attr.mode = S_IRUGO;
+		sensor->dev_attr_input.show = scpi_show_sensor;
+		sensor->dev_attr_input.attr.name = sensor->input;
+
+		sensor->dev_attr_label.attr.mode = S_IRUGO;
+		sensor->dev_attr_label.show = scpi_show_label;
+		sensor->dev_attr_label.attr.name = sensor->label;
+
+		scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr;
+		scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr;
+
+		sysfs_attr_init(scpi_sensors->attrs[i << 1]);
+		sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]);
+	}
+
+	scpi_sensors->group.attrs = scpi_sensors->attrs;
+	scpi_sensors->groups[0] = &scpi_sensors->group;
+
+	platform_set_drvdata(pdev, scpi_sensors);
+
+	hwdev = devm_hwmon_device_register_with_groups(dev,
+			"scpi_sensors", scpi_sensors, scpi_sensors->groups);
+
+	if (IS_ERR(hwdev))
+		return PTR_ERR(hwdev);
+
+	/*
+	 * Register the temperature sensors with the thermal framework
+	 * to allow their usage in setting up the thermal zones from
+	 * device tree.
+	 *
+	 * NOTE: Not all temperature sensors maybe used for thermal
+	 * control
+	 */
+	INIT_LIST_HEAD(&scpi_sensors->thermal_zones);
+	for (i = 0; i < nr_sensors; i++) {
+		struct sensor_data *sensor = &scpi_sensors->data[i];
+		struct scpi_thermal_zone *zone;
+
+		if (sensor->info.class != TEMPERATURE)
+			continue;
+
+		zone = devm_kzalloc(dev, sizeof(*zone), GFP_KERNEL);
+		if (!zone) {
+			ret = -ENOMEM;
+			goto unregister_tzd;
+		}
+
+		zone->sensor_id = i;
+		zone->scpi_sensors = scpi_sensors;
+		zone->tzd = thermal_zone_of_sensor_register(dev, i, zone,
+							    &scpi_sensor_ops);
+		/*
+		 * The call to thermal_zone_of_sensor_register returns
+		 * an error for sensors that are not associated with
+		 * any thermal zones or if the thermal subsystem is
+		 * not configured.
+		 */
+		if (IS_ERR(zone->tzd)) {
+			devm_kfree(dev, zone);
+			continue;
+		}
+		list_add(&zone->list, &scpi_sensors->thermal_zones);
+	}
+
+	return 0;
+
+unregister_tzd:
+	unregister_thermal_zones(pdev, scpi_sensors);
+	return ret;
+}
+
+static int scpi_hwmon_remove(struct platform_device *pdev)
+{
+	struct scpi_sensors *scpi_sensors = platform_get_drvdata(pdev);
+
+	unregister_thermal_zones(pdev, scpi_sensors);
+
+	return 0;
+}
+
+static const struct of_device_id scpi_of_match[] = {
+	{.compatible = "arm,scpi-sensors"},
+	{},
+};
+
+static struct platform_driver scpi_hwmon_platdrv = {
+	.driver = {
+		.name	= "scpi-hwmon",
+		.owner	= THIS_MODULE,
+		.of_match_table = scpi_of_match,
+	},
+	.probe		= scpi_hwmon_probe,
+	.remove		= scpi_hwmon_remove,
+};
+module_platform_driver(scpi_hwmon_platdrv);
+
+MODULE_AUTHOR("Punit Agrawal <punit.agrawal@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI HWMON interface driver");
+MODULE_LICENSE("GPL v2");