diff options
author | Sudeep Holla <sudeep.holla@arm.com> | 2015-10-28 17:17:31 +0000 |
---|---|---|
committer | Guenter Roeck <linux@roeck-us.net> | 2015-11-16 09:59:50 -0800 |
commit | cef03d7e66bd70c4baf61dd2431cf8de250834de (patch) | |
tree | e8a2296d6f0cc62c2224dd849ccf908ef5e86848 /drivers/hwmon | |
parent | d42d5b6f729929f2bbd17d22a2b223b7138470da (diff) | |
download | linux-cef03d7e66bd70c4baf61dd2431cf8de250834de.tar.gz linux-cef03d7e66bd70c4baf61dd2431cf8de250834de.tar.bz2 linux-cef03d7e66bd70c4baf61dd2431cf8de250834de.zip |
hwmon: (scpi) skip unsupported sensors properly
Currently it's assumed that firmware exports only the class of sensors
supported by the driver. However with newer firmware or SCPI protocol
revision, support for newer classes of sensors can be present.
The driver fails to probe with the following warning if an unsupported
class of sensor is encountered in the firmware.
sysfs: cannot create duplicate filename
'/devices/platform/scpi/scpi:sensors/hwmon/hwmon0/'
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:31
Modules linked in:
CPU: 0 PID: 6 Comm: kworker/u12:0 Not tainted 4.3.0-rc7 #137
Hardware name: ARM Juno development board (r0) (DT)
Workqueue: deferwq deferred_probe_work_func
PC is at sysfs_warn_dup+0x54/0x78
LR is at sysfs_warn_dup+0x54/0x78
This patch fixes the above issue by skipping through the unsupported
class of SCPI sensors.
Fixes: 68acc77a2d51 ("hwmon: Support thermal zones registration for SCP temperature sensors")
Fixes: ea98b29a05e9 ("hwmon: Support sensors exported via ARM SCP interface")
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r-- | drivers/hwmon/scpi-hwmon.c | 21 |
1 files changed, 11 insertions, 10 deletions
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c index 2c1241bbf9af..7e20567bc369 100644 --- a/drivers/hwmon/scpi-hwmon.c +++ b/drivers/hwmon/scpi-hwmon.c @@ -117,7 +117,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev) struct scpi_ops *scpi_ops; struct device *hwdev, *dev = &pdev->dev; struct scpi_sensors *scpi_sensors; - int ret; + int ret, idx; scpi_ops = get_scpi_ops(); if (!scpi_ops) @@ -146,8 +146,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev) scpi_sensors->scpi_ops = scpi_ops; - for (i = 0; i < nr_sensors; i++) { - struct sensor_data *sensor = &scpi_sensors->data[i]; + for (i = 0, idx = 0; i < nr_sensors; i++) { + struct sensor_data *sensor = &scpi_sensors->data[idx]; ret = scpi_ops->sensor_get_info(i, &sensor->info); if (ret) @@ -183,7 +183,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev) num_power++; break; default: - break; + continue; } sensor->dev_attr_input.attr.mode = S_IRUGO; @@ -194,11 +194,12 @@ static int scpi_hwmon_probe(struct platform_device *pdev) sensor->dev_attr_label.show = scpi_show_label; sensor->dev_attr_label.attr.name = sensor->label; - scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr; - scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr; + scpi_sensors->attrs[idx << 1] = &sensor->dev_attr_input.attr; + scpi_sensors->attrs[(idx << 1) + 1] = &sensor->dev_attr_label.attr; - sysfs_attr_init(scpi_sensors->attrs[i << 1]); - sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]); + sysfs_attr_init(scpi_sensors->attrs[idx << 1]); + sysfs_attr_init(scpi_sensors->attrs[(idx << 1) + 1]); + idx++; } scpi_sensors->group.attrs = scpi_sensors->attrs; @@ -236,8 +237,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev) zone->sensor_id = i; zone->scpi_sensors = scpi_sensors; - zone->tzd = thermal_zone_of_sensor_register(dev, i, zone, - &scpi_sensor_ops); + zone->tzd = thermal_zone_of_sensor_register(dev, + sensor->info.sensor_id, zone, &scpi_sensor_ops); /* * The call to thermal_zone_of_sensor_register returns * an error for sensors that are not associated with |