ide: remove the legacy ide driver

The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while.  Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 0 insertions, 188 deletions

diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
deleted file mode 100644
index 901e6ebfeb96..000000000000
--- a/drivers/ide/gayle.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *  Amiga Gayle IDE Driver
- *
- *     Created 9 Jul 1997 by Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/zorro.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amigayle.h>
-
-
-    /*
-     *  Offsets from one of the above bases
-     */
-
-#define GAYLE_CONTROL	0x101a
-
-    /*
-     *  These are at different offsets from the base
-     */
-
-#define GAYLE_IRQ_4000	0xdd3020	/* MSB = 1, Harddisk is source of */
-#define GAYLE_IRQ_1200	0xda9000	/* interrupt */
-
-
-    /*
-     *  Offset of the secondary port for IDE doublers
-     *  Note that GAYLE_CONTROL is NOT available then!
-     */
-
-#define GAYLE_NEXT_PORT	0x1000
-
-#define GAYLE_NUM_HWIFS		2
-#define GAYLE_NUM_PROBE_HWIFS	(ide_doubler ? GAYLE_NUM_HWIFS : \
-					       GAYLE_NUM_HWIFS-1)
-#define GAYLE_HAS_CONTROL_REG	(!ide_doubler)
-
-static bool ide_doubler;
-module_param_named(doubler, ide_doubler, bool, 0);
-MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
-
-    /*
-     *  Check and acknowledge the interrupt status
-     */
-
-static int gayle_test_irq(ide_hwif_t *hwif)
-{
-	unsigned char ch;
-
-	ch = z_readb(hwif->io_ports.irq_addr);
-	if (!(ch & GAYLE_IRQ_IDE))
-		return 0;
-	return 1;
-}
-
-static void gayle_a1200_clear_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	(void)z_readb(hwif->io_ports.status_addr);
-	z_writeb(0x7c, hwif->io_ports.irq_addr);
-}
-
-static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
-				     unsigned long ctl, unsigned long irq_port)
-{
-	int i;
-
-	memset(hw, 0, sizeof(*hw));
-
-	hw->io_ports.data_addr = base;
-
-	for (i = 1; i < 8; i++)
-		hw->io_ports_array[i] = base + 2 + i * 4;
-
-	hw->io_ports.ctl_addr = ctl;
-	hw->io_ports.irq_addr = irq_port;
-
-	hw->irq = IRQ_AMIGA_PORTS;
-}
-
-static const struct ide_port_ops gayle_a4000_port_ops = {
-	.test_irq		= gayle_test_irq,
-};
-
-static const struct ide_port_ops gayle_a1200_port_ops = {
-	.clear_irq		= gayle_a1200_clear_irq,
-	.test_irq		= gayle_test_irq,
-};
-
-static const struct ide_port_info gayle_port_info = {
-	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
-				  IDE_HFLAG_NO_DMA,
-	.irq_flags		= IRQF_SHARED,
-	.chipset		= ide_generic,
-};
-
-    /*
-     *  Probe for a Gayle IDE interface (and optionally for an IDE doubler)
-     */
-
-static int __init amiga_gayle_ide_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct gayle_ide_platform_data *pdata;
-	unsigned long base, ctrlport, irqport;
-	unsigned int i;
-	int error;
-	struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
-	struct ide_port_info d = gayle_port_info;
-	struct ide_host *host;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	if (!request_mem_region(res->start, resource_size(res), "IDE"))
-		return -EBUSY;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	pr_info("ide: Gayle IDE controller (A%u style%s)\n",
-		pdata->explicit_ack ? 1200 : 4000,
-		ide_doubler ? ", IDE doubler" : "");
-
-	base = (unsigned long)ZTWO_VADDR(pdata->base);
-	ctrlport = 0;
-	irqport = (unsigned long)ZTWO_VADDR(pdata->irqport);
-	if (pdata->explicit_ack)
-		d.port_ops = &gayle_a1200_port_ops;
-	else
-		d.port_ops = &gayle_a4000_port_ops;
-
-	for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) {
-		if (GAYLE_HAS_CONTROL_REG)
-			ctrlport = base + GAYLE_CONTROL;
-
-		gayle_setup_ports(&hw[i], base, ctrlport, irqport);
-		hws[i] = &hw[i];
-	}
-
-	error = ide_host_add(&d, hws, i, &host);
-	if (error)
-		goto out;
-
-	platform_set_drvdata(pdev, host);
-	return 0;
-
-out:
-	release_mem_region(res->start, resource_size(res));
-	return error;
-}
-
-static int __exit amiga_gayle_ide_remove(struct platform_device *pdev)
-{
-	struct ide_host *host = platform_get_drvdata(pdev);
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	ide_host_remove(host);
-	release_mem_region(res->start, resource_size(res));
-	return 0;
-}
-
-static struct platform_driver amiga_gayle_ide_driver = {
-	.remove = __exit_p(amiga_gayle_ide_remove),
-	.driver   = {
-		.name	= "amiga-gayle-ide",
-	},
-};
-
-module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:amiga-gayle-ide");