summaryrefslogtreecommitdiffstats
path: root/drivers/ide/palm_bk3710.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/palm_bk3710.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
downloadlinux-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.tar.gz
linux-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.tar.bz2
linux-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.zip
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/palm_bk3710.c')
-rw-r--r--drivers/ide/palm_bk3710.c424
1 files changed, 424 insertions, 0 deletions
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
new file mode 100644
index 000000000000..122ed3c072fd
--- /dev/null
+++ b/drivers/ide/palm_bk3710.c
@@ -0,0 +1,424 @@
+/*
+ * Palmchip bk3710 IDE controller
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/* Offset of the primary interface registers */
+#define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0
+
+/* Primary Control Offset */
+#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
+
+/*
+ * PalmChip 3710 IDE Controller UDMA timing structure Definition
+ */
+struct palm_bk3710_udmatiming {
+ unsigned int rptime; /* Ready to pause time */
+ unsigned int cycletime; /* Cycle Time */
+};
+
+#define BK3710_BMICP 0x00
+#define BK3710_BMISP 0x02
+#define BK3710_BMIDTP 0x04
+#define BK3710_BMICS 0x08
+#define BK3710_BMISS 0x0A
+#define BK3710_BMIDTS 0x0C
+#define BK3710_IDETIMP 0x40
+#define BK3710_IDETIMS 0x42
+#define BK3710_SIDETIM 0x44
+#define BK3710_SLEWCTL 0x45
+#define BK3710_IDESTATUS 0x47
+#define BK3710_UDMACTL 0x48
+#define BK3710_UDMATIM 0x4A
+#define BK3710_MISCCTL 0x50
+#define BK3710_REGSTB 0x54
+#define BK3710_REGRCVR 0x58
+#define BK3710_DATSTB 0x5C
+#define BK3710_DATRCVR 0x60
+#define BK3710_DMASTB 0x64
+#define BK3710_DMARCVR 0x68
+#define BK3710_UDMASTB 0x6C
+#define BK3710_UDMATRP 0x70
+#define BK3710_UDMAENV 0x74
+#define BK3710_IORDYTMP 0x78
+#define BK3710_IORDYTMS 0x7C
+
+static unsigned ideclk_period; /* in nanoseconds */
+
+static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
+ {160, 240}, /* UDMA Mode 0 */
+ {125, 160}, /* UDMA Mode 1 */
+ {100, 120}, /* UDMA Mode 2 */
+ {100, 90}, /* UDMA Mode 3 */
+ {100, 60}, /* UDMA Mode 4 */
+ {85, 40}, /* UDMA Mode 5 */
+};
+
+static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
+ unsigned int mode)
+{
+ u8 tenv, trp, t0;
+ u32 val32;
+ u16 val16;
+
+ /* DMA Data Setup */
+ t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
+ ideclk_period) - 1;
+ tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
+ trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
+ ideclk_period) - 1;
+
+ /* udmatim Register */
+ val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
+ val16 |= (mode << (dev ? 4 : 0));
+ writew(val16, base + BK3710_UDMATIM);
+
+ /* udmastb Ultra DMA Access Strobe Width */
+ val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t0 << (dev ? 8 : 0));
+ writel(val32, base + BK3710_UDMASTB);
+
+ /* udmatrp Ultra DMA Ready to Pause Time */
+ val32 = readl(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
+ val32 |= (trp << (dev ? 8 : 0));
+ writel(val32, base + BK3710_UDMATRP);
+
+ /* udmaenv Ultra DMA envelop Time */
+ val32 = readl(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
+ val32 |= (tenv << (dev ? 8 : 0));
+ writel(val32, base + BK3710_UDMAENV);
+
+ /* Enable UDMA for Device */
+ val16 = readw(base + BK3710_UDMACTL) | (1 << dev);
+ writew(val16, base + BK3710_UDMACTL);
+}
+
+static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
+ unsigned short min_cycle,
+ unsigned int mode)
+{
+ u8 td, tkw, t0;
+ u32 val32;
+ u16 val16;
+ struct ide_timing *t;
+ int cycletime;
+
+ t = ide_timing_find_mode(mode);
+ cycletime = max_t(int, t->cycle, min_cycle);
+
+ /* DMA Data Setup */
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+ td = DIV_ROUND_UP(t->active, ideclk_period);
+ tkw = t0 - td - 1;
+ td -= 1;
+
+ val32 = readl(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= (td << (dev ? 8 : 0));
+ writel(val32, base + BK3710_DMASTB);
+
+ val32 = readl(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= (tkw << (dev ? 8 : 0));
+ writel(val32, base + BK3710_DMARCVR);
+
+ /* Disable UDMA for Device */
+ val16 = readw(base + BK3710_UDMACTL) & ~(1 << dev);
+ writew(val16, base + BK3710_UDMACTL);
+}
+
+static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
+ unsigned int dev, unsigned int cycletime,
+ unsigned int mode)
+{
+ u8 t2, t2i, t0;
+ u32 val32;
+ struct ide_timing *t;
+
+ /* PIO Data Setup */
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+ t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
+ ideclk_period);
+
+ t2i = t0 - t2 - 1;
+ t2 -= 1;
+
+ val32 = readl(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t2 << (dev ? 8 : 0));
+ writel(val32, base + BK3710_DATSTB);
+
+ val32 = readl(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t2i << (dev ? 8 : 0));
+ writel(val32, base + BK3710_DATRCVR);
+
+ if (mate) {
+ u8 mode2 = ide_get_best_pio_mode(mate, 255, 4);
+
+ if (mode2 < mode)
+ mode = mode2;
+ }
+
+ /* TASKFILE Setup */
+ t = ide_timing_find_mode(XFER_PIO_0 + mode);
+ t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
+ t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
+
+ t2i = t0 - t2 - 1;
+ t2 -= 1;
+
+ val32 = readl(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t2 << (dev ? 8 : 0));
+ writel(val32, base + BK3710_REGSTB);
+
+ val32 = readl(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
+ val32 |= (t2i << (dev ? 8 : 0));
+ writel(val32, base + BK3710_REGRCVR);
+}
+
+static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
+{
+ int is_slave = drive->dn & 1;
+ void __iomem *base = (void *)drive->hwif->dma_base;
+
+ if (xferspeed >= XFER_UDMA_0) {
+ palm_bk3710_setudmamode(base, is_slave,
+ xferspeed - XFER_UDMA_0);
+ } else {
+ palm_bk3710_setdmamode(base, is_slave,
+ drive->id[ATA_ID_EIDE_DMA_MIN],
+ xferspeed);
+ }
+}
+
+static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio)
+{
+ unsigned int cycle_time;
+ int is_slave = drive->dn & 1;
+ ide_drive_t *mate;
+ void __iomem *base = (void *)drive->hwif->dma_base;
+
+ /*
+ * Obtain the drive PIO data for tuning the Palm Chip registers
+ */
+ cycle_time = ide_pio_cycle_time(drive, pio);
+ mate = ide_get_pair_dev(drive);
+ palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio);
+}
+
+static void __devinit palm_bk3710_chipinit(void __iomem *base)
+{
+ /*
+ * enable the reset_en of ATA controller so that when ata signals
+ * are brought out, by writing into device config. at that
+ * time por_n signal should not be 'Z' and have a stable value.
+ */
+ writel(0x0300, base + BK3710_MISCCTL);
+
+ /* wait for some time and deassert the reset of ATA Device. */
+ mdelay(100);
+
+ /* Deassert the Reset */
+ writel(0x0200, base + BK3710_MISCCTL);
+
+ /*
+ * Program the IDETIMP Register Value based on the following assumptions
+ *
+ * (ATA_IDETIMP_IDEEN , ENABLE ) |
+ * (ATA_IDETIMP_SLVTIMEN , DISABLE) |
+ * (ATA_IDETIMP_RDYSMPL , 70NS) |
+ * (ATA_IDETIMP_RDYRCVRY , 50NS) |
+ * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) |
+ * (ATA_IDETIMP_PREPOST1 , DISABLE) |
+ * (ATA_IDETIMP_RDYSEN1 , DISABLE) |
+ * (ATA_IDETIMP_PIOFTIM1 , DISABLE) |
+ * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) |
+ * (ATA_IDETIMP_PREPOST0 , DISABLE) |
+ * (ATA_IDETIMP_RDYSEN0 , DISABLE) |
+ * (ATA_IDETIMP_PIOFTIM0 , DISABLE)
+ */
+ writew(0xB388, base + BK3710_IDETIMP);
+
+ /*
+ * Configure SIDETIM Register
+ * (ATA_SIDETIM_RDYSMPS1 ,120NS ) |
+ * (ATA_SIDETIM_RDYRCYS1 ,120NS )
+ */
+ writeb(0, base + BK3710_SIDETIM);
+
+ /*
+ * UDMACTL Ultra-ATA DMA Control
+ * (ATA_UDMACTL_UDMAP1 , 0 ) |
+ * (ATA_UDMACTL_UDMAP0 , 0 )
+ *
+ */
+ writew(0, base + BK3710_UDMACTL);
+
+ /*
+ * MISCCTL Miscellaneous Conrol Register
+ * (ATA_MISCCTL_RSTMODEP , 1) |
+ * (ATA_MISCCTL_RESETP , 0) |
+ * (ATA_MISCCTL_TIMORIDE , 1)
+ */
+ writel(0x201, base + BK3710_MISCCTL);
+
+ /*
+ * IORDYTMP IORDY Timer for Primary Register
+ * (ATA_IORDYTMP_IORDYTMP , 0xffff )
+ */
+ writel(0xFFFF, base + BK3710_IORDYTMP);
+
+ /*
+ * Configure BMISP Register
+ * (ATA_BMISP_DMAEN1 , DISABLE ) |
+ * (ATA_BMISP_DMAEN0 , DISABLE ) |
+ * (ATA_BMISP_IORDYINT , CLEAR) |
+ * (ATA_BMISP_INTRSTAT , CLEAR) |
+ * (ATA_BMISP_DMAERROR , CLEAR)
+ */
+ writew(0, base + BK3710_BMISP);
+
+ palm_bk3710_setpiomode(base, NULL, 0, 600, 0);
+ palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
+}
+
+static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
+{
+ return ATA_CBL_PATA80;
+}
+
+static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
+{
+ printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
+
+ if (ide_allocate_dma_engine(hwif))
+ return -1;
+
+ hwif->dma_base = hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET;
+
+ hwif->dma_ops = &sff_dma_ops;
+
+ return 0;
+}
+
+static const struct ide_port_ops palm_bk3710_ports_ops = {
+ .set_pio_mode = palm_bk3710_set_pio_mode,
+ .set_dma_mode = palm_bk3710_set_dma_mode,
+ .cable_detect = palm_bk3710_cable_detect,
+};
+
+static struct ide_port_info __devinitdata palm_bk3710_port_info = {
+ .init_dma = palm_bk3710_init_dma,
+ .port_ops = &palm_bk3710_ports_ops,
+ .host_flags = IDE_HFLAG_MMIO,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+};
+
+static int __init palm_bk3710_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct resource *mem, *irq;
+ unsigned long base, rate;
+ int i, rc;
+ hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+
+ clk = clk_get(&pdev->dev, "IDECLK");
+ if (IS_ERR(clk))
+ return -ENODEV;
+
+ clk_enable(clk);
+ rate = clk_get_rate(clk);
+ ideclk_period = 1000000000UL / rate;
+
+ /* Register the IDE interface with Linux ATA Interface */
+ memset(&hw, 0, sizeof(hw));
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (mem == NULL) {
+ printk(KERN_ERR "failed to get memory region resource\n");
+ return -ENODEV;
+ }
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq == NULL) {
+ printk(KERN_ERR "failed to get IRQ resource\n");
+ return -ENODEV;
+ }
+
+ if (request_mem_region(mem->start, mem->end - mem->start + 1,
+ "palm_bk3710") == NULL) {
+ printk(KERN_ERR "failed to request memory region\n");
+ return -EBUSY;
+ }
+
+ base = IO_ADDRESS(mem->start);
+
+ /* Configure the Palm Chip controller */
+ palm_bk3710_chipinit((void __iomem *)base);
+
+ for (i = 0; i < IDE_NR_PORTS - 2; i++)
+ hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
+ hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
+ hw.irq = irq->start;
+ hw.dev = &pdev->dev;
+ hw.chipset = ide_palm3710;
+
+ palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
+ ATA_UDMA5;
+
+ rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
+ if (rc)
+ goto out;
+
+ return 0;
+out:
+ printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
+ return rc;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:palm_bk3710");
+
+static struct platform_driver platform_bk_driver = {
+ .driver = {
+ .name = "palm_bk3710",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init palm_bk3710_init(void)
+{
+ return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
+}
+
+module_init(palm_bk3710_init);
+MODULE_LICENSE("GPL");