diff options
| author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-04-18 00:46:24 +0200 |
|---|---|---|
| committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-04-18 00:46:24 +0200 |
| commit | 80aa31cb460d12c1e02327b43eceb3eebc6e7090 (patch) | |
| tree | c9f77aab26f78002d38d941cf62dafd23b4d9146 /drivers/ide | |
| parent | fef39d95ea19d4b5e2547e344809a5398eba8b3c (diff) | |
| download | linux-80aa31cb460d12c1e02327b43eceb3eebc6e7090.tar.gz linux-80aa31cb460d12c1e02327b43eceb3eebc6e7090.tar.bz2 linux-80aa31cb460d12c1e02327b43eceb3eebc6e7090.zip | |
ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2)
* Remove CONFIG_BLK_DEV_HD hack from init_hwif_default()
("hda=noprobe hdb=noprobe" kernel parameters should be used
instead if somebody wishes to use the old "hd" driver).
* Make CONFIG_BLK_DEV_HD_ONLY config option available also when
IDE subsystem is used and update help entry.
* Remove no longer needed CONFIG_BLK_DEV_HD_IDE config option.
v2:
* Update documentation to suggest "hda=noprobe hdb=noprobe"
instead of obsoleted "ide0=noprobe".
* Update Documentation/ide/ide.txt.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/Kconfig | 25 | ||||
| -rw-r--r-- | drivers/ide/ide.c | 4 |
2 files changed, 5 insertions, 24 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index ac5875783430..4dc2761e9704 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -122,24 +122,6 @@ config BLK_DEV_IDE_SATA If unsure, say N. -config BLK_DEV_HD_IDE - bool "Use old disk-only driver on primary interface" - depends on (X86 || SH_MPC1211) - ---help--- - There are two drivers for MFM/RLL/IDE disks. Most people use just - the new enhanced driver by itself. This option however installs the - old hard disk driver to control the primary IDE/disk interface in - the system, leaving the new enhanced IDE driver to take care of only - the 2nd/3rd/4th IDE interfaces. Doing this will prevent you from - having an IDE/ATAPI CD-ROM or tape drive connected to the primary - IDE interface. Choosing this option may be useful for older systems - which have MFM/RLL/ESDI controller+drives at the primary port - address (0x1f0), along with IDE drives at the secondary/3rd/4th port - addresses. - - Normally, just say N here; you will then use the new driver for all - 4 interfaces. - config BLK_DEV_IDEDISK tristate "Include IDE/ATA-2 DISK support" ---help--- @@ -1114,7 +1096,6 @@ endif config BLK_DEV_HD_ONLY bool "Old hard disk (MFM/RLL/IDE) driver" - depends on BLK_DEV_IDE=n help There are two drivers for MFM/RLL/IDE hard disks. Most people use the newer enhanced driver, but this old one is still around for two @@ -1126,12 +1107,16 @@ config BLK_DEV_HD_ONLY for systems with only older MFM/RLL/ESDI drives. Choosing the old driver can save 13 KB or so of kernel memory. + If you want to use this driver together with the new one you have + to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new + driver from probing the primary interface. + If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver instead of this one. For more detailed information, read the Disk-HOWTO, available from <http://www.tldp.org/docs.html#howto>. config BLK_DEV_HD - def_bool BLK_DEV_HD_IDE || BLK_DEV_HD_ONLY + def_bool BLK_DEV_HD_ONLY endif # IDE diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index d791b1ffb586..96126b3b12e9 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -177,10 +177,6 @@ static void init_hwif_default(ide_hwif_t *hwif, unsigned int index) memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports)); hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; -#ifdef CONFIG_BLK_DEV_HD - if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA) - hwif->noprobe = 1; /* may be overridden by ide_setup() */ -#endif } /* |