iio: adc: ina2xx: avoid NULL pointer dereference on OF device match

The affected lines were resulting in a NULL pointer dereference on our
platform because the device tree contained the following list of
compatible strings:

    power-sensor@40 {
        compatible = "ti,ina232", "ti,ina231";
        ...
    };

Since the driver doesn't declare a compatible string "ti,ina232", the OF
matching succeeds on "ti,ina231". But the I2C device ID info is
populated via the first compatible string, cf. modalias population in
of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy
I2C device ID table either, the struct i2c_device_id *id pointer in the
probe function is NULL.

Fix this by using the already populated type variable instead, which
points to the proper driver data. Since the name is also wanted, add a
generic one to the ina2xx_config table.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors")
Link: https://lore.kernel.org/r/20230619141239.2257392-1-alvin@pqrs.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

1 files changed, 6 insertions, 3 deletions

diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 213526c1592f..aea83f369437 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -124,6 +124,7 @@ static const struct regmap_config ina2xx_regmap_config = {
 enum ina2xx_ids { ina219, ina226 };
 
 struct ina2xx_config {
+	const char *name;
 	u16 config_default;
 	int calibration_value;
 	int shunt_voltage_lsb;	/* nV */
@@ -155,6 +156,7 @@ struct ina2xx_chip_info {
 
 static const struct ina2xx_config ina2xx_config[] = {
 	[ina219] = {
+		.name = "ina219",
 		.config_default = INA219_CONFIG_DEFAULT,
 		.calibration_value = 4096,
 		.shunt_voltage_lsb = 10000,
@@ -164,6 +166,7 @@ static const struct ina2xx_config ina2xx_config[] = {
 		.chip_id = ina219,
 	},
 	[ina226] = {
+		.name = "ina226",
 		.config_default = INA226_CONFIG_DEFAULT,
 		.calibration_value = 2048,
 		.shunt_voltage_lsb = 2500,
@@ -996,7 +999,7 @@ static int ina2xx_probe(struct i2c_client *client)
 	/* Patch the current config register with default. */
 	val = chip->config->config_default;
 
-	if (id->driver_data == ina226) {
+	if (type == ina226) {
 		ina226_set_average(chip, INA226_DEFAULT_AVG, &val);
 		ina226_set_int_time_vbus(chip, INA226_DEFAULT_IT, &val);
 		ina226_set_int_time_vshunt(chip, INA226_DEFAULT_IT, &val);
@@ -1015,7 +1018,7 @@ static int ina2xx_probe(struct i2c_client *client)
 	}
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	if (id->driver_data == ina226) {
+	if (type == ina226) {
 		indio_dev->channels = ina226_channels;
 		indio_dev->num_channels = ARRAY_SIZE(ina226_channels);
 		indio_dev->info = &ina226_info;
@@ -1024,7 +1027,7 @@ static int ina2xx_probe(struct i2c_client *client)
 		indio_dev->num_channels = ARRAY_SIZE(ina219_channels);
 		indio_dev->info = &ina219_info;
 	}
-	indio_dev->name = id->name;
+	indio_dev->name = id ? id->name : chip->config->name;
 
 	ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
 					  &ina2xx_setup_ops);