iio: cros_ec: Remove replacing error code with -EIO

Due to an API misread, error code can be different for -EIO when reading
a sysfs entry. Return the error reported by the cros_ec stack.

Check the proper error message (protocol error, not supported) is
reported when there is an error returned by the EC stack.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

1 files changed, 25 insertions, 19 deletions

diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 96d5aa1f4bd5..8d43965c3b9a 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -33,6 +33,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
 	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
 	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+	int ret;
 
 	platform_set_drvdata(pdev, indio_dev);
 
@@ -60,9 +61,10 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 
 		state->param.cmd = MOTIONSENSE_CMD_INFO;
 		state->param.info.sensor_num = sensor_platform->sensor_num;
-		if (cros_ec_motion_send_host_cmd(state, 0)) {
+		ret = cros_ec_motion_send_host_cmd(state, 0);
+		if (ret) {
 			dev_warn(dev, "Can not access sensor info\n");
-			return -EIO;
+			return ret;
 		}
 		state->type = state->resp->info.type;
 		state->loc = state->resp->info.location;
@@ -86,7 +88,7 @@ int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
 
 	ret = cros_ec_cmd_xfer_status(state->ec, state->msg);
 	if (ret < 0)
-		return -EIO;
+		return ret;
 
 	if (ret &&
 	    state->resp != (struct ec_response_motion_sense *)state->msg->data)
@@ -396,7 +398,7 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 			  struct iio_chan_spec const *chan,
 			  int *val, int *val2, long mask)
 {
-	int ret = IIO_VAL_INT;
+	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
@@ -404,22 +406,27 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 		st->param.ec_rate.data =
 			EC_MOTION_SENSE_NO_VALUE;
 
-		if (cros_ec_motion_send_host_cmd(st, 0))
-			ret = -EIO;
-		else
-			*val = st->resp->ec_rate.ret;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+
+		*val = st->resp->ec_rate.ret;
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_FREQUENCY:
 		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
 		st->param.sensor_odr.data =
 			EC_MOTION_SENSE_NO_VALUE;
 
-		if (cros_ec_motion_send_host_cmd(st, 0))
-			ret = -EIO;
-		else
-			*val = st->resp->sensor_odr.ret;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+
+		*val = st->resp->sensor_odr.ret;
+		ret = IIO_VAL_INT;
 		break;
 	default:
+		ret = -EINVAL;
 		break;
 	}
 
@@ -431,7 +438,7 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 			       struct iio_chan_spec const *chan,
 			       int val, int val2, long mask)
 {
-	int ret = 0;
+	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_FREQUENCY:
@@ -441,17 +448,16 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 		/* Always roundup, so caller gets at least what it asks for. */
 		st->param.sensor_odr.roundup = 1;
 
-		if (cros_ec_motion_send_host_cmd(st, 0))
-			ret = -EIO;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
 		st->param.ec_rate.data = val;
 
-		if (cros_ec_motion_send_host_cmd(st, 0))
-			ret = -EIO;
-		else
-			st->curr_sampl_freq = val;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+		st->curr_sampl_freq = val;
 		break;
 	default:
 		ret = -EINVAL;