summaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
authorSamuel Ortiz <sameo@linux.intel.com>2013-06-13 12:14:59 +0200
committerSamuel Ortiz <sameo@linux.intel.com>2013-06-13 12:14:59 +0200
commitd8c5d658f425bd25bbfb137f2617f59ed4fdee7d (patch)
treeba1607f9cc0fb8c3ac246a78490d3e5b8438f44e /drivers/input
parenta1ace0aac5a83b859c2ddeb5dfb032b9b6dcd9cf (diff)
parent1460c152c53335b5403045d056502eda1204c33a (diff)
downloadlinux-d8c5d658f425bd25bbfb137f2617f59ed4fdee7d.tar.gz
linux-d8c5d658f425bd25bbfb137f2617f59ed4fdee7d.tar.bz2
linux-d8c5d658f425bd25bbfb137f2617f59ed4fdee7d.zip
Merge tag 'am335x_tsc-adc' of git://breakpoint.cc/bigeasy/linux
A complete refurbished series inclunding: - DT support for the MFD, TSC and ADC driver & platform device support, which has no users, has been killed. - iio_map from last series is gone and replaced by proper nodes in the device tree. - suspend fixes which means correct data structs are taken and no interrupt storm - fifo split which should problem with TSC & ADC beeing used at the same time - The ADC channels are now checked before blindly applied. That means the touch part reads X, Y and Z coordinates and does not mix them up. Same goes for the IIO ADC driver. - The IIO ADC driver now creates files named in_voltageX_raw where X represents the ADC line instead of a number starting at 0. A read from this file can return -EBUSY in case touch is busy and the ADC didn't collect a value.
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/touchscreen/ti_am335x_tsc.c288
1 files changed, 203 insertions, 85 deletions
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 51e7b87827a4..0e9f02aeae6b 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -24,8 +24,9 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/input/ti_am335x_tsc.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/ti_am335x_tscadc.h>
@@ -33,6 +34,13 @@
#define SEQ_SETTLE 275
#define MAX_12BIT ((1 << 12) - 1)
+static const int config_pins[] = {
+ STEPCONFIG_XPP,
+ STEPCONFIG_XNN,
+ STEPCONFIG_YPP,
+ STEPCONFIG_YNN,
+};
+
struct titsc {
struct input_dev *input;
struct ti_tscadc_dev *mfd_tscadc;
@@ -40,7 +48,10 @@ struct titsc {
unsigned int wires;
unsigned int x_plate_resistance;
bool pen_down;
- int steps_to_configure;
+ int coordinate_readouts;
+ u32 config_inp[4];
+ u32 bit_xp, bit_xn, bit_yp, bit_yn;
+ u32 inp_xp, inp_xn, inp_yp, inp_yn;
};
static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
@@ -54,92 +65,153 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg,
writel(val, tsc->mfd_tscadc->tscadc_base + reg);
}
+static int titsc_config_wires(struct titsc *ts_dev)
+{
+ u32 analog_line[4];
+ u32 wire_order[4];
+ int i, bit_cfg;
+
+ for (i = 0; i < 4; i++) {
+ /*
+ * Get the order in which TSC wires are attached
+ * w.r.t. each of the analog input lines on the EVM.
+ */
+ analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
+ wire_order[i] = ts_dev->config_inp[i] & 0x0F;
+ if (WARN_ON(analog_line[i] > 7))
+ return -EINVAL;
+ if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 4; i++) {
+ int an_line;
+ int wi_order;
+
+ an_line = analog_line[i];
+ wi_order = wire_order[i];
+ bit_cfg = config_pins[wi_order];
+ if (bit_cfg == 0)
+ return -EINVAL;
+ switch (wi_order) {
+ case 0:
+ ts_dev->bit_xp = bit_cfg;
+ ts_dev->inp_xp = an_line;
+ break;
+
+ case 1:
+ ts_dev->bit_xn = bit_cfg;
+ ts_dev->inp_xn = an_line;
+ break;
+
+ case 2:
+ ts_dev->bit_yp = bit_cfg;
+ ts_dev->inp_yp = an_line;
+ break;
+ case 3:
+ ts_dev->bit_yn = bit_cfg;
+ ts_dev->inp_yn = an_line;
+ break;
+ }
+ }
+ return 0;
+}
+
static void titsc_step_config(struct titsc *ts_dev)
{
unsigned int config;
- int i, total_steps;
-
- /* Configure the Step registers */
- total_steps = 2 * ts_dev->steps_to_configure;
+ int i;
+ int end_step;
+ u32 stepenable;
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
+ STEPCONFIG_AVG_16 | ts_dev->bit_xp;
switch (ts_dev->wires) {
case 4:
- config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+ config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
break;
case 5:
- config |= STEPCONFIG_YNN |
- STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
- STEPCONFIG_YPP;
+ config |= ts_dev->bit_yn |
+ STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
+ ts_dev->bit_yp;
break;
case 8:
- config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+ config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
break;
}
- for (i = 1; i <= ts_dev->steps_to_configure; i++) {
+ /* 1 … coordinate_readouts is for X */
+ end_step = ts_dev->coordinate_readouts;
+ for (i = 0; i < end_step; i++) {
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
}
config = 0;
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
- STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
+ STEPCONFIG_AVG_16 | ts_dev->bit_yn |
+ STEPCONFIG_INM_ADCREFM;
switch (ts_dev->wires) {
case 4:
- config |= STEPCONFIG_YPP;
+ config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
break;
case 5:
- config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
- STEPCONFIG_XNP | STEPCONFIG_YPN;
+ config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
+ ts_dev->bit_xn | ts_dev->bit_yp;
break;
case 8:
- config |= STEPCONFIG_YPP;
+ config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
break;
}
- for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
+ /* coordinate_readouts … coordinate_readouts * 2 is for Y */
+ end_step = ts_dev->coordinate_readouts * 2;
+ for (i = ts_dev->coordinate_readouts; i < end_step; i++) {
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
}
- config = 0;
/* Charge step configuration */
- config = STEPCONFIG_XPP | STEPCONFIG_YNN |
+ config = ts_dev->bit_xp | ts_dev->bit_yn |
STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
- STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
+ STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp);
titsc_writel(ts_dev, REG_CHARGECONFIG, config);
titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
- config = 0;
- /* Configure to calculate pressure */
+ /* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
- STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
- titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
- titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
+ STEPCONFIG_AVG_16 | ts_dev->bit_yp |
+ ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
+ STEPCONFIG_INP(ts_dev->inp_xp);
+ titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(end_step),
STEPCONFIG_OPENDLY);
- config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
- titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
- titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
+ end_step++;
+ config |= STEPCONFIG_INP(ts_dev->inp_yn);
+ titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(end_step),
STEPCONFIG_OPENDLY);
- titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+ /* The steps1 … end and bit 0 for TS_Charge */
+ stepenable = (1 << (end_step + 2)) - 1;
+ am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable);
}
static void titsc_read_coordinates(struct titsc *ts_dev,
- unsigned int *x, unsigned int *y)
+ u32 *x, u32 *y, u32 *z1, u32 *z2)
{
unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
unsigned int prev_val_x = ~0, prev_val_y = ~0;
unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
unsigned int read, diff;
unsigned int i, channel;
+ unsigned int creads = ts_dev->coordinate_readouts;
+ *z1 = *z2 = 0;
+ if (fifocount % (creads * 2 + 2))
+ fifocount -= fifocount % (creads * 2 + 2);
/*
* Delta filter is used to remove large variations in sampled
* values from ADC. The filter tries to predict where the next
@@ -148,32 +220,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
* algorithm compares the difference with that of a present value,
* if true the value is reported to the sub system.
*/
- for (i = 0; i < fifocount - 1; i++) {
+ for (i = 0; i < fifocount; i++) {
read = titsc_readl(ts_dev, REG_FIFO0);
- channel = read & 0xf0000;
- channel = channel >> 0x10;
- if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
- read &= 0xfff;
+
+ channel = (read & 0xf0000) >> 16;
+ read &= 0xfff;
+ if (channel < creads) {
diff = abs(read - prev_val_x);
if (diff < prev_diff_x) {
prev_diff_x = diff;
*x = read;
}
prev_val_x = read;
- }
- read = titsc_readl(ts_dev, REG_FIFO1);
- channel = read & 0xf0000;
- channel = channel >> 0x10;
- if ((channel >= ts_dev->steps_to_configure) &&
- (channel < (2 * ts_dev->steps_to_configure - 1))) {
- read &= 0xfff;
+ } else if (channel < creads * 2) {
diff = abs(read - prev_val_y);
if (diff < prev_diff_y) {
prev_diff_y = diff;
*y = read;
}
prev_val_y = read;
+
+ } else if (channel < creads * 2 + 1) {
+ *z1 = read;
+
+ } else if (channel < creads * 2 + 2) {
+ *z2 = read;
}
}
}
@@ -186,23 +258,11 @@ static irqreturn_t titsc_irq(int irq, void *dev)
unsigned int x = 0, y = 0;
unsigned int z1, z2, z;
unsigned int fsm;
- unsigned int fifo1count, fifo0count;
- int i;
status = titsc_readl(ts_dev, REG_IRQSTATUS);
if (status & IRQENB_FIFO0THRES) {
- titsc_read_coordinates(ts_dev, &x, &y);
- z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
- z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
-
- fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
- for (i = 0; i < fifo1count; i++)
- titsc_readl(ts_dev, REG_FIFO1);
-
- fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
- for (i = 0; i < fifo0count; i++)
- titsc_readl(ts_dev, REG_FIFO0);
+ titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
/*
@@ -210,10 +270,10 @@ static irqreturn_t titsc_irq(int irq, void *dev)
* Resistance(touch) = x plate resistance *
* x postion/4096 * ((z2 / z1) - 1)
*/
- z = z2 - z1;
+ z = z1 - z2;
z *= x;
z *= ts_dev->x_plate_resistance;
- z /= z1;
+ z /= z2;
z = (z + 2047) >> 12;
if (z <= MAX_12BIT) {
@@ -248,10 +308,53 @@ static irqreturn_t titsc_irq(int irq, void *dev)
irqclr |= IRQENB_PENUP;
}
- titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+ if (status & IRQENB_HW_PEN) {
+
+ titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00);
+ titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+ }
- titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
- return IRQ_HANDLED;
+ if (irqclr) {
+ titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+ am335x_tsc_se_update(ts_dev->mfd_tscadc);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static int titsc_parse_dt(struct platform_device *pdev,
+ struct titsc *ts_dev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ int err;
+
+ if (!node)
+ return -EINVAL;
+
+ err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
+ if (err < 0)
+ return err;
+ switch (ts_dev->wires) {
+ case 4:
+ case 5:
+ case 8:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = of_property_read_u32(node, "ti,x-plate-resistance",
+ &ts_dev->x_plate_resistance);
+ if (err < 0)
+ return err;
+
+ err = of_property_read_u32(node, "ti,coordiante-readouts",
+ &ts_dev->coordinate_readouts);
+ if (err < 0)
+ return err;
+
+ return of_property_read_u32_array(node, "ti,wire-config",
+ ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
}
/*
@@ -262,17 +365,9 @@ static int titsc_probe(struct platform_device *pdev)
{
struct titsc *ts_dev;
struct input_dev *input_dev;
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct mfd_tscadc_board *pdata;
+ struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
int err;
- pdata = tscadc_dev->dev->platform_data;
-
- if (!pdata) {
- dev_err(&pdev->dev, "Could not find platform data\n");
- return -EINVAL;
- }
-
/* Allocate memory for device */
ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
input_dev = input_allocate_device();
@@ -286,9 +381,12 @@ static int titsc_probe(struct platform_device *pdev)
ts_dev->mfd_tscadc = tscadc_dev;
ts_dev->input = input_dev;
ts_dev->irq = tscadc_dev->irq;
- ts_dev->wires = pdata->tsc_init->wires;
- ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
- ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
+
+ err = titsc_parse_dt(pdev, ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "Could not find valid DT data.\n");
+ goto err_free_mem;
+ }
err = request_irq(ts_dev->irq, titsc_irq,
0, pdev->dev.driver->name, ts_dev);
@@ -298,8 +396,14 @@ static int titsc_probe(struct platform_device *pdev)
}
titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
+ err = titsc_config_wires(ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "wrong i/p wire configuration\n");
+ goto err_free_irq;
+ }
titsc_step_config(ts_dev);
- titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
+ titsc_writel(ts_dev, REG_FIFO0THR,
+ ts_dev->coordinate_readouts * 2 + 2 - 1);
input_dev->name = "ti-tsc";
input_dev->dev.parent = &pdev->dev;
@@ -329,11 +433,16 @@ err_free_mem:
static int titsc_remove(struct platform_device *pdev)
{
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = platform_get_drvdata(pdev);
+ u32 steps;
free_irq(ts_dev->irq, ts_dev);
+ /* total steps followed by the enable mask */
+ steps = 2 * ts_dev->coordinate_readouts + 2;
+ steps = (1 << steps) - 1;
+ am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);
+
input_unregister_device(ts_dev->input);
platform_set_drvdata(pdev, NULL);
@@ -344,10 +453,11 @@ static int titsc_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int titsc_suspend(struct device *dev)
{
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = dev_get_drvdata(dev);
+ struct ti_tscadc_dev *tscadc_dev;
unsigned int idle;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (device_may_wakeup(tscadc_dev->dev)) {
idle = titsc_readl(ts_dev, REG_IRQENABLE);
titsc_writel(ts_dev, REG_IRQENABLE,
@@ -359,9 +469,10 @@ static int titsc_suspend(struct device *dev)
static int titsc_resume(struct device *dev)
{
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = dev_get_drvdata(dev);
+ struct ti_tscadc_dev *tscadc_dev;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (device_may_wakeup(tscadc_dev->dev)) {
titsc_writel(ts_dev, REG_IRQWAKEUP,
0x00);
@@ -369,7 +480,7 @@ static int titsc_resume(struct device *dev)
}
titsc_step_config(ts_dev);
titsc_writel(ts_dev, REG_FIFO0THR,
- ts_dev->steps_to_configure);
+ ts_dev->coordinate_readouts * 2 + 2 - 1);
return 0;
}
@@ -382,13 +493,20 @@ static const struct dev_pm_ops titsc_pm_ops = {
#define TITSC_PM_OPS NULL
#endif
+static const struct of_device_id ti_tsc_dt_ids[] = {
+ { .compatible = "ti,am3359-tsc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);
+
static struct platform_driver ti_tsc_driver = {
.probe = titsc_probe,
.remove = titsc_remove,
.driver = {
- .name = "tsc",
+ .name = "TI-am335x-tsc",
.owner = THIS_MODULE,
.pm = TITSC_PM_OPS,
+ .of_match_table = of_match_ptr(ti_tsc_dt_ids),
},
};
module_platform_driver(ti_tsc_driver);