diff options
author | Andreas Eversberg <jolly@eversberg.eu> | 2012-04-24 20:52:14 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2012-04-26 05:21:03 -0400 |
commit | 07003408fc219ca7c45d2f559999f6aca08d711a (patch) | |
tree | 57002be7845c5f407a5745ee72e2535a79cf276d /drivers/isdn/hardware | |
parent | 864fd636b196e7502df14d82a719744203d47193 (diff) | |
download | linux-07003408fc219ca7c45d2f559999f6aca08d711a.tar.gz linux-07003408fc219ca7c45d2f559999f6aca08d711a.tar.bz2 linux-07003408fc219ca7c45d2f559999f6aca08d711a.zip |
mISDN: Added support for fragmentation of E1 interfaces of hfcmulti driver.
Fragmentation is usefull if multiple devices are connected to an E1
interface. Each fragment will have a subset of the available timeslots.
These devices require a cascde connection or a multiplexer.
Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/isdn/hardware')
-rw-r--r-- | drivers/isdn/hardware/mISDN/hfc_multi.h | 6 | ||||
-rw-r--r-- | drivers/isdn/hardware/mISDN/hfcmulti.c | 396 |
2 files changed, 236 insertions, 166 deletions
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h index 09e4e77811f1..c601f880141e 100644 --- a/drivers/isdn/hardware/mISDN/hfc_multi.h +++ b/drivers/isdn/hardware/mISDN/hfc_multi.h @@ -208,7 +208,10 @@ struct hfc_multi { u_long ledstate; /* save last state of leds */ int opticalsupport; /* has the e1 board */ /* an optical Interface */ - int dslot; /* channel # of d-channel (E1) default 16 */ + + u_int bmask[32]; /* bitmask of bchannels for port */ + u_char dnum[32]; /* array of used dchannel numbers for port */ + u_char created[32]; /* what port is created */ u_int activity_tx; /* if there is data TX / RX */ u_int activity_rx; /* bitmask according to port number */ /* (will be cleared after */ @@ -234,7 +237,6 @@ struct hfc_multi { * the bch->channel is equvalent to the hfc-channel */ struct hfc_chan chan[32]; - u_char created[8]; /* what port is created */ signed char slot_owner[256]; /* owner channel of slot */ }; diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 876f7d0db26f..43013316b9b0 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -103,14 +103,26 @@ * Omit this value, if all cards are interconnected or none is connected. * If unsure, don't give this parameter. * - * dslot: - * NOTE: only one dslot value must be given for every card. - * Also this value must be given for non-E1 cards. If omitted, the E1 - * card has D-channel on time slot 16, which is default. - * If 1..15 or 17..31, an alternate time slot is used for D-channel. - * In this case, the application must be able to handle this. - * If -1 is given, the D-channel is disabled and all 31 slots can be used - * for B-channel. (only for specific applications) + * dmask and bmask: + * NOTE: One dmask value must be given for every HFC-E1 card. + * If omitted, the E1 card has D-channel on time slot 16, which is default. + * dmask is a 32 bit mask. The bit must be set for an alternate time slot. + * If multiple bits are set, multiple virtual card fragments are created. + * For each bit set, a bmask value must be given. Each bit on the bmask + * value stands for a B-channel. The bmask may not overlap with dmask or + * with other bmask values for that card. + * Example: dmask=0x00020002 bmask=0x0000fffc,0xfffc0000 + * This will create one fragment with D-channel on slot 1 with + * B-channels on slots 2..15, and a second fragment with D-channel + * on slot 17 with B-channels on slot 18..31. Slot 16 is unused. + * If bit 0 is set (dmask=0x00000001) the D-channel is on slot 0 and will + * not function. + * Example: dmask=0x00000001 bmask=0xfffffffe + * This will create a port with all 31 usable timeslots as + * B-channels. + * If no bits are set on bmask, no B-channel is created for that fragment. + * Example: dmask=0xfffffffe bmask=0,0,0,0.... (31 0-values for bmask) + * This will create 31 ports with one D-channel only. * If you don't know how to use it, you don't need it! * * iomode: @@ -172,6 +184,7 @@ #define MAX_CARDS 8 #define MAX_PORTS (8 * MAX_CARDS) +#define MAX_FRAGS (32 * MAX_CARDS) static LIST_HEAD(HFClist); static spinlock_t HFClock; /* global hfc list lock */ @@ -203,7 +216,8 @@ static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30 }; static uint type[MAX_CARDS]; static int pcm[MAX_CARDS]; -static int dslot[MAX_CARDS]; +static uint dmask[MAX_CARDS]; +static uint bmask[MAX_FRAGS]; static uint iomode[MAX_CARDS]; static uint port[MAX_PORTS]; static uint debug; @@ -218,7 +232,7 @@ static uint clockdelay_nt = CLKDEL_NT; #define HWID_MINIP16 3 static uint hwid = HWID_NONE; -static int HFC_cnt, Port_cnt, PCM_cnt = 99; +static int HFC_cnt, E1_cnt, bmask_cnt, Port_cnt, PCM_cnt = 99; MODULE_AUTHOR("Andreas Eversberg"); MODULE_LICENSE("GPL"); @@ -231,7 +245,8 @@ module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR); module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR); module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR); module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR); -module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR); +module_param_array(dmask, uint, NULL, S_IRUGO | S_IWUSR); +module_param_array(bmask, uint, NULL, S_IRUGO | S_IWUSR); module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR); module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR); module_param(hwid, uint, S_IRUGO | S_IWUSR); /* The hardware ID */ @@ -1619,9 +1634,9 @@ hfcmulti_leds(struct hfc_multi *hc) led[1] = 0; led[2] = 0; led[3] = 0; - dch = hc->chan[hc->dslot].dch; + dch = hc->chan[hc->dnum[0]].dch; if (dch) { - if (hc->chan[hc->dslot].los) + if (hc->chan[hc->dnum[0]].los) led[1] = 1; if (hc->e1_state != 1) { led[0] = 1; @@ -2453,55 +2468,55 @@ handle_timer_irq(struct hfc_multi *hc) } } if (hc->ctype == HFC_TYPE_E1 && hc->created[0]) { - dch = hc->chan[hc->dslot].dch; - if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) { - /* LOS */ - temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS; - if (!temp && hc->chan[hc->dslot].los) + dch = hc->chan[hc->dnum[0]].dch; + /* LOS */ + temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS; + hc->chan[hc->dnum[0]].los = temp; + if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dnum[0]].cfg)) { + if (!temp && hc->chan[hc->dnum[0]].los) signal_state_up(dch, L1_SIGNAL_LOS_ON, "LOS detected"); - if (temp && !hc->chan[hc->dslot].los) + if (temp && !hc->chan[hc->dnum[0]].los) signal_state_up(dch, L1_SIGNAL_LOS_OFF, "LOS gone"); - hc->chan[hc->dslot].los = temp; } - if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) { + if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dnum[0]].cfg)) { /* AIS */ temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS; - if (!temp && hc->chan[hc->dslot].ais) + if (!temp && hc->chan[hc->dnum[0]].ais) signal_state_up(dch, L1_SIGNAL_AIS_ON, "AIS detected"); - if (temp && !hc->chan[hc->dslot].ais) + if (temp && !hc->chan[hc->dnum[0]].ais) signal_state_up(dch, L1_SIGNAL_AIS_OFF, "AIS gone"); - hc->chan[hc->dslot].ais = temp; + hc->chan[hc->dnum[0]].ais = temp; } - if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) { + if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dnum[0]].cfg)) { /* SLIP */ temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX; - if (!temp && hc->chan[hc->dslot].slip_rx) + if (!temp && hc->chan[hc->dnum[0]].slip_rx) signal_state_up(dch, L1_SIGNAL_SLIP_RX, " bit SLIP detected RX"); - hc->chan[hc->dslot].slip_rx = temp; + hc->chan[hc->dnum[0]].slip_rx = temp; temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX; - if (!temp && hc->chan[hc->dslot].slip_tx) + if (!temp && hc->chan[hc->dnum[0]].slip_tx) signal_state_up(dch, L1_SIGNAL_SLIP_TX, " bit SLIP detected TX"); - hc->chan[hc->dslot].slip_tx = temp; + hc->chan[hc->dnum[0]].slip_tx = temp; } - if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) { + if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dnum[0]].cfg)) { /* RDI */ temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A; - if (!temp && hc->chan[hc->dslot].rdi) + if (!temp && hc->chan[hc->dnum[0]].rdi) signal_state_up(dch, L1_SIGNAL_RDI_ON, "RDI detected"); - if (temp && !hc->chan[hc->dslot].rdi) + if (temp && !hc->chan[hc->dnum[0]].rdi) signal_state_up(dch, L1_SIGNAL_RDI_OFF, "RDI gone"); - hc->chan[hc->dslot].rdi = temp; + hc->chan[hc->dnum[0]].rdi = temp; } temp = HFC_inb_nodebug(hc, R_JATT_DIR); - switch (hc->chan[hc->dslot].sync) { + switch (hc->chan[hc->dnum[0]].sync) { case 0: if ((temp & 0x60) == 0x60) { if (debug & DEBUG_HFCMULTI_SYNC) @@ -2510,10 +2525,10 @@ handle_timer_irq(struct hfc_multi *hc) "in clock sync\n", __func__, hc->id); HFC_outb(hc, R_RX_OFF, - hc->chan[hc->dslot].jitter | V_RX_INIT); + hc->chan[hc->dnum[0]].jitter | V_RX_INIT); HFC_outb(hc, R_TX_OFF, - hc->chan[hc->dslot].jitter | V_RX_INIT); - hc->chan[hc->dslot].sync = 1; + hc->chan[hc->dnum[0]].jitter | V_RX_INIT); + hc->chan[hc->dnum[0]].sync = 1; goto check_framesync; } break; @@ -2524,7 +2539,7 @@ handle_timer_irq(struct hfc_multi *hc) "%s: (id=%d) E1 " "lost clock sync\n", __func__, hc->id); - hc->chan[hc->dslot].sync = 0; + hc->chan[hc->dnum[0]].sync = 0; break; } check_framesync: @@ -2535,7 +2550,7 @@ handle_timer_irq(struct hfc_multi *hc) "%s: (id=%d) E1 " "now in frame sync\n", __func__, hc->id); - hc->chan[hc->dslot].sync = 2; + hc->chan[hc->dnum[0]].sync = 2; } break; case 2: @@ -2545,7 +2560,7 @@ handle_timer_irq(struct hfc_multi *hc) "%s: (id=%d) E1 lost " "clock & frame sync\n", __func__, hc->id); - hc->chan[hc->dslot].sync = 0; + hc->chan[hc->dnum[0]].sync = 0; break; } temp = HFC_inb_nodebug(hc, R_SYNC_STA); @@ -2555,7 +2570,7 @@ handle_timer_irq(struct hfc_multi *hc) "%s: (id=%d) E1 " "lost frame sync\n", __func__, hc->id); - hc->chan[hc->dslot].sync = 1; + hc->chan[hc->dnum[0]].sync = 1; } break; } @@ -2696,7 +2711,7 @@ hfcmulti_interrupt(int intno, void *dev_id) int i; void __iomem *plx_acc; u_short wval; - u_char e1_syncsta, temp; + u_char e1_syncsta, temp, temp2; u_long flags; if (!hc) { @@ -2771,7 +2786,7 @@ hfcmulti_interrupt(int intno, void *dev_id) if (r_irq_misc & V_STA_IRQ) { if (hc->ctype == HFC_TYPE_E1) { /* state machine */ - dch = hc->chan[hc->dslot].dch; + dch = hc->chan[hc->dnum[0]].dch; e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA); if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->e1_getclock) { @@ -2781,23 +2796,26 @@ hfcmulti_interrupt(int intno, void *dev_id) hc->syncronized = 0; } /* undocumented: status changes during read */ - dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA); - while (dch->state != (temp = + temp = HFC_inb_nodebug(hc, R_E1_RD_STA); + while (temp != (temp2 = HFC_inb_nodebug(hc, R_E1_RD_STA))) { if (debug & DEBUG_HFCMULTI_STATE) printk(KERN_DEBUG "%s: reread " "STATE because %d!=%d\n", - __func__, temp, - dch->state); - dch->state = temp; /* repeat */ + __func__, temp, temp2); + temp = temp2; /* repeat */ } - dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA) - & 0x7; - schedule_event(dch, FLG_PHCHANGE); + /* broadcast state change to all fragments */ if (debug & DEBUG_HFCMULTI_STATE) printk(KERN_DEBUG "%s: E1 (id=%d) newstate %x\n", - __func__, hc->id, dch->state); + __func__, hc->id, temp & 0x7); + for (i = 0; i < hc->ports; i++) { + dch = hc->chan[hc->dnum[i]].dch; + dch->state = temp & 0x7; + schedule_event(dch, FLG_PHCHANGE); + } + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) plxsd_checksync(hc, 0); } @@ -3870,31 +3888,37 @@ hfcmulti_initmode(struct dchannel *dch) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: entered\n", __func__); + i = dch->slot; + pt = hc->chan[i].port; if (hc->ctype == HFC_TYPE_E1) { - hc->chan[hc->dslot].slot_tx = -1; - hc->chan[hc->dslot].slot_rx = -1; - hc->chan[hc->dslot].conf = -1; - if (hc->dslot) { - mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol, + /* E1 */ + hc->chan[hc->dnum[pt]].slot_tx = -1; + hc->chan[hc->dnum[pt]].slot_rx = -1; + hc->chan[hc->dnum[pt]].conf = -1; + if (hc->dnum[pt]) { + mode_hfcmulti(hc, dch->slot, dch->dev.D.protocol, -1, 0, -1, 0); dch->timer.function = (void *) hfcmulti_dbusy_timer; dch->timer.data = (long) dch; init_timer(&dch->timer); } for (i = 1; i <= 31; i++) { - if (i == hc->dslot) + if (!((1 << i) & hc->bmask[pt])) /* skip unused chan */ continue; hc->chan[i].slot_tx = -1; hc->chan[i].slot_rx = -1; hc->chan[i].conf = -1; mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0); } - /* E1 */ - if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) { + } + if (hc->ctype == HFC_TYPE_E1 && pt == 0) { + /* E1, port 0 */ + dch = hc->chan[hc->dnum[0]].dch; + if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dnum[0]].cfg)) { HFC_outb(hc, R_LOS0, 255); /* 2 ms */ HFC_outb(hc, R_LOS1, 255); /* 512 ms */ } - if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) { + if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dnum[0]].cfg)) { HFC_outb(hc, R_RX0, 0); hc->hw.r_tx0 = 0 | V_OUT_EN; } else { @@ -3907,12 +3931,12 @@ hfcmulti_initmode(struct dchannel *dch) HFC_outb(hc, R_TX_FR0, 0x00); HFC_outb(hc, R_TX_FR1, 0xf8); - if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg)) + if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dnum[0]].cfg)) HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E); HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0); - if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg)) + if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dnum[0]].cfg)) HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC); if (dch->dev.D.protocol == ISDN_P_NT_E1) { @@ -3975,13 +3999,14 @@ hfcmulti_initmode(struct dchannel *dch) hc->syncronized = 0; plxsd_checksync(hc, 0); } - } else { - i = dch->slot; + } + if (hc->ctype != HFC_TYPE_E1) { + /* ST */ hc->chan[i].slot_tx = -1; hc->chan[i].slot_rx = -1; hc->chan[i].conf = -1; mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0); - dch->timer.function = (void *)hfcmulti_dbusy_timer; + dch->timer.function = (void *) hfcmulti_dbusy_timer; dch->timer.data = (long) dch; init_timer(&dch->timer); hc->chan[i - 2].slot_tx = -1; @@ -3992,8 +4017,6 @@ hfcmulti_initmode(struct dchannel *dch) hc->chan[i - 1].slot_rx = -1; hc->chan[i - 1].conf = -1; mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0); - /* ST */ - pt = hc->chan[i].port; /* select interface */ HFC_outb(hc, R_ST_SEL, pt); /* undocumented: delay after R_ST_SEL */ @@ -4571,6 +4594,8 @@ release_port(struct hfc_multi *hc, struct dchannel *dch) } /* free channels */ for (i = 0; i <= 31; i++) { + if (!((1 << i) & hc->bmask[pt])) /* skip unused chan */ + continue; if (hc->chan[i].bch) { if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG @@ -4626,7 +4651,8 @@ release_port(struct hfc_multi *hc, struct dchannel *dch) spin_unlock_irqrestore(&hc->lock, flags); if (debug & DEBUG_HFCMULTI_INIT) - printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt); + printk(KERN_DEBUG "%s: free port %d channel D(%d)\n", __func__, + pt+1, ci); mISDN_freedchannel(dch); kfree(dch); @@ -4648,15 +4674,19 @@ release_card(struct hfc_multi *hc) if (hc->iclock) mISDN_unregister_clock(hc->iclock); - /* disable irq */ + /* disable and free irq */ spin_lock_irqsave(&hc->lock, flags); disable_hwirq(hc); spin_unlock_irqrestore(&hc->lock, flags); udelay(1000); + if (hc->irq) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: free irq %d (hc=%p)\n", + __func__, hc->irq, hc); + free_irq(hc->irq, hc); + hc->irq = 0; - /* dimm leds */ - if (hc->leds) - hfcmulti_leds(hc); + } /* disable D-channels & B-channels */ if (debug & DEBUG_HFCMULTI_INIT) @@ -4667,15 +4697,11 @@ release_card(struct hfc_multi *hc) release_port(hc, hc->chan[ch].dch); } - /* release hardware & irq */ - if (hc->irq) { - if (debug & DEBUG_HFCMULTI_INIT) - printk(KERN_DEBUG "%s: free irq %d\n", - __func__, hc->irq); - free_irq(hc->irq, hc); - hc->irq = 0; + /* dimm leds */ + if (hc->leds) + hfcmulti_leds(hc); - } + /* release hardware */ release_io_hfcmulti(hc); if (debug & DEBUG_HFCMULTI_INIT) @@ -4693,61 +4719,9 @@ release_card(struct hfc_multi *hc) __func__); } -static int -init_e1_port(struct hfc_multi *hc, struct hm_map *m) +static void +init_e1_port_hw(struct hfc_multi *hc, struct hm_map *m) { - struct dchannel *dch; - struct bchannel *bch; - int ch, ret = 0; - char name[MISDN_MAX_IDLEN]; - - dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL); - if (!dch) - return -ENOMEM; - dch->debug = debug; - mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change); - dch->hw = hc; - dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1); - dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) | - (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK)); - dch->dev.D.send = handle_dmsg; - dch->dev.D.ctrl = hfcm_dctrl; - dch->dev.nrbchan = (hc->dslot) ? 30 : 31; - dch->slot = hc->dslot; - hc->chan[hc->dslot].dch = dch; - hc->chan[hc->dslot].port = 0; - hc->chan[hc->dslot].nt_timer = -1; - for (ch = 1; ch <= 31; ch++) { - if (ch == hc->dslot) /* skip dchannel */ - continue; - bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL); - if (!bch) { - printk(KERN_ERR "%s: no memory for bchannel\n", - __func__); - ret = -ENOMEM; - goto free_chan; - } - hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL); - if (!hc->chan[ch].coeff) { - printk(KERN_ERR "%s: no memory for coeffs\n", - __func__); - ret = -ENOMEM; - kfree(bch); - goto free_chan; - } - bch->nr = ch; - bch->slot = ch; - bch->debug = debug; - mISDN_initbchannel(bch, MAX_DATA_MEM); - bch->hw = hc; - bch->ch.send = handle_bmsg; - bch->ch.ctrl = hfcm_bctrl; - bch->ch.nr = ch; - list_add(&bch->ch.list, &dch->dev.bchannels); - hc->chan[ch].bch = bch; - hc->chan[ch].port = 0; - set_channelmap(bch->nr, dch->dev.channelmap); - } /* set optical line type */ if (port[Port_cnt] & 0x001) { if (!m->opticalsupport) { @@ -4763,7 +4737,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) __func__, HFC_cnt + 1, 1); test_and_set_bit(HFC_CFG_OPTICAL, - &hc->chan[hc->dslot].cfg); + &hc->chan[hc->dnum[0]].cfg); } } /* set LOS report */ @@ -4773,7 +4747,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) "LOS report: card(%d) port(%d)\n", __func__, HFC_cnt + 1, 1); test_and_set_bit(HFC_CFG_REPORT_LOS, - &hc->chan[hc->dslot].cfg); + &hc->chan[hc->dnum[0]].cfg); } /* set AIS report */ if (port[Port_cnt] & 0x008) { @@ -4782,7 +4756,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) "AIS report: card(%d) port(%d)\n", __func__, HFC_cnt + 1, 1); test_and_set_bit(HFC_CFG_REPORT_AIS, - &hc->chan[hc->dslot].cfg); + &hc->chan[hc->dnum[0]].cfg); } /* set SLIP report */ if (port[Port_cnt] & 0x010) { @@ -4792,7 +4766,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) "card(%d) port(%d)\n", __func__, HFC_cnt + 1, 1); test_and_set_bit(HFC_CFG_REPORT_SLIP, - &hc->chan[hc->dslot].cfg); + &hc->chan[hc->dnum[0]].cfg); } /* set RDI report */ if (port[Port_cnt] & 0x020) { @@ -4802,7 +4776,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) "card(%d) port(%d)\n", __func__, HFC_cnt + 1, 1); test_and_set_bit(HFC_CFG_REPORT_RDI, - &hc->chan[hc->dslot].cfg); + &hc->chan[hc->dnum[0]].cfg); } /* set CRC-4 Mode */ if (!(port[Port_cnt] & 0x100)) { @@ -4811,7 +4785,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) " card(%d) port(%d)\n", __func__, HFC_cnt + 1, 1); test_and_set_bit(HFC_CFG_CRC4, - &hc->chan[hc->dslot].cfg); + &hc->chan[hc->dnum[0]].cfg); } else { if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: PORT turn off CRC4" @@ -4843,20 +4817,85 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) } /* set elastic jitter buffer */ if (port[Port_cnt] & 0x3000) { - hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3; + hc->chan[hc->dnum[0]].jitter = (port[Port_cnt]>>12) & 0x3; if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: PORT set elastic " "buffer to %d: card(%d) port(%d)\n", - __func__, hc->chan[hc->dslot].jitter, + __func__, hc->chan[hc->dnum[0]].jitter, HFC_cnt + 1, 1); } else - hc->chan[hc->dslot].jitter = 2; /* default */ - snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1); + hc->chan[hc->dnum[0]].jitter = 2; /* default */ +} + +static int +init_e1_port(struct hfc_multi *hc, struct hm_map *m, int pt) +{ + struct dchannel *dch; + struct bchannel *bch; + int ch, ret = 0; + char name[MISDN_MAX_IDLEN]; + int bcount = 0; + + dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL); + if (!dch) + return -ENOMEM; + dch->debug = debug; + mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change); + dch->hw = hc; + dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1); + dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) | + (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK)); + dch->dev.D.send = handle_dmsg; + dch->dev.D.ctrl = hfcm_dctrl; + dch->slot = hc->dnum[pt]; + hc->chan[hc->dnum[pt]].dch = dch; + hc->chan[hc->dnum[pt]].port = pt; + hc->chan[hc->dnum[pt]].nt_timer = -1; + for (ch = 1; ch <= 31; ch++) { + if (!((1 << ch) & hc->bmask[pt])) /* skip unused channel */ + continue; + bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL); + if (!bch) { + printk(KERN_ERR "%s: no memory for bchannel\n", + __func__); + ret = -ENOMEM; + goto free_chan; + } + hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL); + if (!hc->chan[ch].coeff) { + printk(KERN_ERR "%s: no memory for coeffs\n", + __func__); + ret = -ENOMEM; + kfree(bch); + goto free_chan; + } + bch->nr = ch; + bch->slot = ch; + bch->debug = debug; + mISDN_initbchannel(bch, MAX_DATA_MEM); + bch->hw = hc; + bch->ch.send = handle_bmsg; + bch->ch.ctrl = hfcm_bctrl; + bch->ch.nr = ch; + list_add(&bch->ch.list, &dch->dev.bchannels); + hc->chan[ch].bch = bch; + hc->chan[ch].port = pt; + set_channelmap(bch->nr, dch->dev.channelmap); + bcount++; + } + dch->dev.nrbchan = bcount; + if (pt == 0) + init_e1_port_hw(hc, m); + if (hc->ports > 1) + snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d-%d", + HFC_cnt + 1, pt+1); + else + snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1); ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name); if (ret) goto free_chan; - hc->created[0] = 1; + hc->created[pt] = 1; return ret; free_chan: release_port(hc, dch); @@ -4989,7 +5028,8 @@ hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, struct hfc_multi *hc; u_long flags; u_char dips = 0, pmj = 0; /* dip settings, port mode Jumpers */ - int i; + int i, ch; + u_int maskcheck; if (HFC_cnt >= MAX_CARDS) { printk(KERN_ERR "too many cards (max=%d).\n", @@ -5023,18 +5063,36 @@ hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, hc->id = HFC_cnt; hc->pcm = pcm[HFC_cnt]; hc->io_mode = iomode[HFC_cnt]; - if (dslot[HFC_cnt] < 0 && hc->ctype == HFC_TYPE_E1) { - hc->dslot = 0; - printk(KERN_INFO "HFC-E1 card has disabled D-channel, but " - "31 B-channels\n"); - } - if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 - && hc->ctype == HFC_TYPE_E1) { - hc->dslot = dslot[HFC_cnt]; - printk(KERN_INFO "HFC-E1 card has alternating D-channel on " - "time slot %d\n", dslot[HFC_cnt]); - } else - hc->dslot = 16; + if (hc->ctype == HFC_TYPE_E1 && dmask[E1_cnt]) { + /* fragment card */ + pt = 0; + maskcheck = 0; + for (ch = 0; ch <= 31; ch++) { + if (!((1 << ch) & dmask[E1_cnt])) + continue; + hc->dnum[pt] = ch; + hc->bmask[pt] = bmask[bmask_cnt++]; + if ((maskcheck & hc->bmask[pt]) + || (dmask[E1_cnt] & hc->bmask[pt])) { + printk(KERN_INFO + "HFC-E1 #%d has overlapping B-channels on fragment #%d\n", + E1_cnt + 1, pt); + return -EINVAL; + } + maskcheck |= hc->bmask[pt]; + printk(KERN_INFO + "HFC-E1 #%d uses D-channel on slot %d and a B-channel map of 0x%08x\n", + E1_cnt + 1, ch, hc->bmask[pt]); + pt++; + } + hc->ports = pt; + } + if (hc->ctype == HFC_TYPE_E1 && !dmask[E1_cnt]) { + /* default card layout */ + hc->dnum[0] = 16; + hc->bmask[0] = 0xfffefffe; + hc->ports = 1; + } /* set chip specific features */ hc->masterclk = -1; @@ -5117,23 +5175,33 @@ hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, goto free_card; } if (hc->ctype == HFC_TYPE_E1) - ret_err = init_e1_port(hc, m); + ret_err = init_e1_port(hc, m, pt); else ret_err = init_multi_port(hc, pt); if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG - "%s: Registering D-channel, card(%d) port(%d)" + "%s: Registering D-channel, card(%d) port(%d) " "result %d\n", - __func__, HFC_cnt + 1, pt, ret_err); + __func__, HFC_cnt + 1, pt + 1, ret_err); if (ret_err) { while (pt) { /* release already registered ports */ pt--; - release_port(hc, hc->chan[(pt << 2) + 2].dch); + if (hc->ctype == HFC_TYPE_E1) + release_port(hc, + hc->chan[hc->dnum[pt]].dch); + else + release_port(hc, + hc->chan[(pt << 2) + 2].dch); } goto free_card; } - Port_cnt++; + if (hc->ctype != HFC_TYPE_E1) + Port_cnt++; /* for each S0 port */ + } + if (hc->ctype == HFC_TYPE_E1) { + Port_cnt++; /* for each E1 port */ + E1_cnt++; } /* disp switches */ |