USB: Disable hub-initiated LPM for comms devices.

Hub-initiated LPM is not good for USB communications devices.  Comms
devices should be able to tell when their link can go into a lower power
state, because they know when an incoming transmission is finished.
Ideally, these devices would slam their links into a lower power state,
using the device-initiated LPM, after finishing the last packet of their
data transfer.

If we enable the idle timeouts for the parent hubs to enable
hub-initiated LPM, we will get a lot of useless LPM packets on the bus
as the devices reject LPM transitions when they're in the middle of
receiving data.  Worse, some devices might blindly accept the
hub-initiated LPM and power down their radios while they're in the
middle of receiving a transmission.

The Intel Windows folks are disabling hub-initiated LPM for all USB
communications devices under a xHCI USB 3.0 host.  In order to keep
the Linux behavior as close as possible to Windows, we need to do the
same in Linux.

Set the disable_hub_initiated_lpm flag for for all USB communications
drivers.  I know there aren't currently any USB 3.0 devices that
implement these class specifications, but we should be ready if they do.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Jan Dumon <j.dumon@option.com>
Cc: Petko Manolov <petkan@users.sourceforge.net>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
Cc: Jouni Malinen <jouni@qca.qualcomm.com>
Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com>
Cc: Kan Yan <kanyan@broadcom.com>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Cc: Ivo van Doorn <IvDoorn@gmail.com>
Cc: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: Herton Ronaldo Krzesinski <herton@canonical.com>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Chaoming Li <chaoming_li@realsil.com.cn>
Cc: Daniel Drake <dsd@gentoo.org>
Cc: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

5 files changed, 5 insertions, 0 deletions

diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index afa080258bfa..17ea0177a529 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -148,6 +148,7 @@ static struct usb_driver gigaset_usb_driver = {
 	.reset_resume =	gigaset_post_reset,
 	.pre_reset =	gigaset_pre_reset,
 	.post_reset =	gigaset_post_reset,
+	.disable_hub_initiated_lpm = 1,
 };
 
 /* get message text for usb_submit_urb return code
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index 049da67f6392..78f81e8a5be6 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -124,6 +124,7 @@ static struct usb_driver gigaset_usb_driver = {
 	.reset_resume =	gigaset_resume,
 	.pre_reset =	gigaset_pre_reset,
 	.post_reset =	gigaset_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 struct usb_cardstate {
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 8cde2a0538ab..cddb769a8b12 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -2151,6 +2151,7 @@ static struct usb_driver hfcsusb_drv = {
 	.id_table = hfcsusb_idtab,
 	.probe = hfcsusb_probe,
 	.disconnect = hfcsusb_disconnect,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(hfcsusb_drv);
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 62c65bdefd8a..84f9c8103078 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1568,6 +1568,7 @@ static struct usb_driver hfc_drv = {
 	.id_table = hfcusb_idtab,
 	.probe = hfc_usb_probe,
 	.disconnect = hfc_usb_disconnect,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static void __exit
diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c
index 100296e20dc0..54ef9e4f8cbc 100644
--- a/drivers/isdn/hisax/st5481_init.c
+++ b/drivers/isdn/hisax/st5481_init.c
@@ -182,6 +182,7 @@ static struct usb_driver st5481_usb_driver = {
 	.probe =	probe_st5481,
 	.disconnect =	disconnect_st5481,
 	.id_table =	st5481_ids,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static int __init st5481_usb_init(void)