diff options
author | Jacek Anaszewski <jacek.anaszewski@gmail.com> | 2019-06-11 23:46:37 +0200 |
---|---|---|
committer | Jacek Anaszewski <jacek.anaszewski@gmail.com> | 2019-06-11 23:46:37 +0200 |
commit | 25529edef561ca51dadcbb6e97b1c40d2dbc5bae (patch) | |
tree | 601201c4c9d00959ecb2ea8a8f9b2335ae332a4e /drivers/leds | |
parent | 09bfa5f6833a62bd6669d3ba7f83105181287b92 (diff) | |
parent | 11e1bbc116a75d4a93122ea0a3b2be814922d864 (diff) | |
download | linux-25529edef561ca51dadcbb6e97b1c40d2dbc5bae.tar.gz linux-25529edef561ca51dadcbb6e97b1c40d2dbc5bae.tar.bz2 linux-25529edef561ca51dadcbb6e97b1c40d2dbc5bae.zip |
Merge tag 'ti-lmu-led-drivers' into for-next
Merge immutable branch between LEDs, MFD and REGULATOR due to
TI LMU LED support rework and introduction of two new drivers
with DT bindings.
* tag 'ti-lmu-led-drivers':
leds: lm36274: Introduce the TI LM36274 LED driver
dt-bindings: leds: Add LED bindings for the LM36274
regulator: lm363x: Add support for LM36274
mfd: ti-lmu: Add LM36274 support to the ti-lmu
dt-bindings: mfd: Add lm36274 bindings to ti-lmu
leds: lm3697: Introduce the lm3697 driver
mfd: ti-lmu: Remove support for LM3697
dt-bindings: ti-lmu: Modify dt bindings for the LM3697
leds: TI LMU: Add common code for TI LMU devices
dt-bindings: mfd: LMU: Add ti,brightness-resolution
dt-bindings: mfd: LMU: Add the ramp up/down property
Diffstat (limited to 'drivers/leds')
-rw-r--r-- | drivers/leds/Kconfig | 25 | ||||
-rw-r--r-- | drivers/leds/Makefile | 3 | ||||
-rw-r--r-- | drivers/leds/leds-lm36274.c | 172 | ||||
-rw-r--r-- | drivers/leds/leds-lm3697.c | 395 | ||||
-rw-r--r-- | drivers/leds/leds-ti-lmu-common.c | 156 |
5 files changed, 751 insertions, 0 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 35fcddb7ac2a..fb8072303ee8 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -793,6 +793,31 @@ config LEDS_SPI_BYTE for controlling the brightness. Currently the following controller is supported: Ubiquiti airCube ISP microcontroller based LED controller. +config LEDS_TI_LMU_COMMON + tristate "LED driver for TI LMU" + depends on LEDS_CLASS + depends on REGMAP + help + Say Y to enable the LED driver for TI LMU devices. + This supports common features between the TI LM3532, LM3631, LM3632, + LM3633, LM3695 and LM3697. + +config LEDS_LM3697 + tristate "LED driver for LM3697" + depends on LEDS_TI_LMU_COMMON + depends on I2C && OF + help + Say Y to enable the LM3697 LED driver for TI LMU devices. + This supports the LED device LM3697. + +config LEDS_LM36274 + tristate "LED driver for LM36274" + depends on LEDS_TI_LMU_COMMON + depends on MFD_TI_LMU + help + Say Y to enable the LM36274 LED driver for TI LMU devices. + This supports the LED device LM36274. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 2e8bff590700..41fb073a39c1 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -82,6 +82,9 @@ obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o +obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o +obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o +obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o # LED SPI Drivers obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o diff --git a/drivers/leds/leds-lm36274.c b/drivers/leds/leds-lm36274.c new file mode 100644 index 000000000000..ed9dc857ec8f --- /dev/null +++ b/drivers/leds/leds-lm36274.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 +// TI LM36274 LED chip family driver +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/leds.h> +#include <linux/leds-ti-lmu-common.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include <linux/mfd/ti-lmu.h> +#include <linux/mfd/ti-lmu-register.h> + +#include <uapi/linux/uleds.h> + +#define LM36274_MAX_STRINGS 4 +#define LM36274_BL_EN BIT(4) + +/** + * struct lm36274 + * @pdev: platform device + * @led_dev: led class device + * @lmu_data: Register and setting values for common code + * @regmap: Devices register map + * @dev: Pointer to the devices device struct + * @led_sources - The LED strings supported in this array + * @num_leds - Number of LED strings are supported in this array + */ +struct lm36274 { + struct platform_device *pdev; + struct led_classdev led_dev; + struct ti_lmu_bank lmu_data; + struct regmap *regmap; + struct device *dev; + + u32 led_sources[LM36274_MAX_STRINGS]; + int num_leds; +}; + +static int lm36274_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brt_val) +{ + struct lm36274 *led = container_of(led_cdev, struct lm36274, led_dev); + + return ti_lmu_common_set_brightness(&led->lmu_data, brt_val); +} + +static int lm36274_init(struct lm36274 *lm36274_data) +{ + int enable_val = 0; + int i; + + for (i = 0; i < lm36274_data->num_leds; i++) + enable_val |= (1 << lm36274_data->led_sources[i]); + + if (!enable_val) { + dev_err(lm36274_data->dev, "No LEDs were enabled\n"); + return -EINVAL; + } + + enable_val |= LM36274_BL_EN; + + return regmap_write(lm36274_data->regmap, LM36274_REG_BL_EN, + enable_val); +} + +static int lm36274_parse_dt(struct lm36274 *lm36274_data) +{ + struct fwnode_handle *child = NULL; + char label[LED_MAX_NAME_SIZE]; + struct device *dev = &lm36274_data->pdev->dev; + const char *name; + int child_cnt; + int ret = -EINVAL; + + /* There should only be 1 node */ + child_cnt = device_get_child_node_count(dev); + if (child_cnt != 1) + return -EINVAL; + + device_for_each_child_node(dev, child) { + ret = fwnode_property_read_string(child, "label", &name); + if (ret) + snprintf(label, sizeof(label), + "%s::", lm36274_data->pdev->name); + else + snprintf(label, sizeof(label), + "%s:%s", lm36274_data->pdev->name, name); + + lm36274_data->num_leds = fwnode_property_read_u32_array(child, + "led-sources", + NULL, 0); + if (lm36274_data->num_leds <= 0) + return -ENODEV; + + ret = fwnode_property_read_u32_array(child, "led-sources", + lm36274_data->led_sources, + lm36274_data->num_leds); + if (ret) { + dev_err(dev, "led-sources property missing\n"); + return ret; + } + + fwnode_property_read_string(child, "linux,default-trigger", + &lm36274_data->led_dev.default_trigger); + + } + + lm36274_data->lmu_data.regmap = lm36274_data->regmap; + lm36274_data->lmu_data.max_brightness = MAX_BRIGHTNESS_11BIT; + lm36274_data->lmu_data.msb_brightness_reg = LM36274_REG_BRT_MSB; + lm36274_data->lmu_data.lsb_brightness_reg = LM36274_REG_BRT_LSB; + + lm36274_data->led_dev.name = label; + lm36274_data->led_dev.max_brightness = MAX_BRIGHTNESS_11BIT; + lm36274_data->led_dev.brightness_set_blocking = lm36274_brightness_set; + + return 0; +} + +static int lm36274_probe(struct platform_device *pdev) +{ + struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent); + struct lm36274 *lm36274_data; + int ret; + + lm36274_data = devm_kzalloc(&pdev->dev, sizeof(*lm36274_data), + GFP_KERNEL); + if (!lm36274_data) + return -ENOMEM; + + lm36274_data->pdev = pdev; + lm36274_data->dev = lmu->dev; + lm36274_data->regmap = lmu->regmap; + dev_set_drvdata(&pdev->dev, lm36274_data); + + ret = lm36274_parse_dt(lm36274_data); + if (ret) { + dev_err(lm36274_data->dev, "Failed to parse DT node\n"); + return ret; + } + + ret = lm36274_init(lm36274_data); + if (ret) { + dev_err(lm36274_data->dev, "Failed to init the device\n"); + return ret; + } + + return devm_led_classdev_register(lm36274_data->dev, + &lm36274_data->led_dev); +} + +static const struct of_device_id of_lm36274_leds_match[] = { + { .compatible = "ti,lm36274-backlight", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_lm36274_leds_match); + +static struct platform_driver lm36274_driver = { + .probe = lm36274_probe, + .driver = { + .name = "lm36274-leds", + }, +}; +module_platform_driver(lm36274_driver) + +MODULE_DESCRIPTION("Texas Instruments LM36274 LED driver"); +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-lm3697.c b/drivers/leds/leds-lm3697.c new file mode 100644 index 000000000000..54e0e35df824 --- /dev/null +++ b/drivers/leds/leds-lm3697.c @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0 +// TI LM3697 LED chip family driver +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/leds-ti-lmu-common.h> + +#define LM3697_REV 0x0 +#define LM3697_RESET 0x1 +#define LM3697_OUTPUT_CONFIG 0x10 +#define LM3697_CTRL_A_RAMP 0x11 +#define LM3697_CTRL_B_RAMP 0x12 +#define LM3697_CTRL_A_B_RT_RAMP 0x13 +#define LM3697_CTRL_A_B_RAMP_CFG 0x14 +#define LM3697_CTRL_A_B_BRT_CFG 0x16 +#define LM3697_CTRL_A_FS_CURR_CFG 0x17 +#define LM3697_CTRL_B_FS_CURR_CFG 0x18 +#define LM3697_PWM_CFG 0x1c +#define LM3697_CTRL_A_BRT_LSB 0x20 +#define LM3697_CTRL_A_BRT_MSB 0x21 +#define LM3697_CTRL_B_BRT_LSB 0x22 +#define LM3697_CTRL_B_BRT_MSB 0x23 +#define LM3697_CTRL_ENABLE 0x24 + +#define LM3697_SW_RESET BIT(0) + +#define LM3697_CTRL_A_EN BIT(0) +#define LM3697_CTRL_B_EN BIT(1) +#define LM3697_CTRL_A_B_EN (LM3697_CTRL_A_EN | LM3697_CTRL_B_EN) + +#define LM3697_MAX_LED_STRINGS 3 + +#define LM3697_CONTROL_A 0 +#define LM3697_CONTROL_B 1 +#define LM3697_MAX_CONTROL_BANKS 2 + +/** + * struct lm3697_led - + * @hvled_strings: Array of LED strings associated with a control bank + * @label: LED label + * @led_dev: LED class device + * @priv: Pointer to the device struct + * @lmu_data: Register and setting values for common code + * @control_bank: Control bank the LED is associated to. 0 is control bank A + * 1 is control bank B + */ +struct lm3697_led { + u32 hvled_strings[LM3697_MAX_LED_STRINGS]; + char label[LED_MAX_NAME_SIZE]; + struct led_classdev led_dev; + struct lm3697 *priv; + struct ti_lmu_bank lmu_data; + int control_bank; + int enabled; + int num_leds; +}; + +/** + * struct lm3697 - + * @enable_gpio: Hardware enable gpio + * @regulator: LED supply regulator pointer + * @client: Pointer to the I2C client + * @regmap: Devices register map + * @dev: Pointer to the devices device struct + * @lock: Lock for reading/writing the device + * @leds: Array of LED strings + */ +struct lm3697 { + struct gpio_desc *enable_gpio; + struct regulator *regulator; + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + struct mutex lock; + + int bank_cfg; + + struct lm3697_led leds[]; +}; + +static const struct reg_default lm3697_reg_defs[] = { + {LM3697_OUTPUT_CONFIG, 0x6}, + {LM3697_CTRL_A_RAMP, 0x0}, + {LM3697_CTRL_B_RAMP, 0x0}, + {LM3697_CTRL_A_B_RT_RAMP, 0x0}, + {LM3697_CTRL_A_B_RAMP_CFG, 0x0}, + {LM3697_CTRL_A_B_BRT_CFG, 0x0}, + {LM3697_CTRL_A_FS_CURR_CFG, 0x13}, + {LM3697_CTRL_B_FS_CURR_CFG, 0x13}, + {LM3697_PWM_CFG, 0xc}, + {LM3697_CTRL_A_BRT_LSB, 0x0}, + {LM3697_CTRL_A_BRT_MSB, 0x0}, + {LM3697_CTRL_B_BRT_LSB, 0x0}, + {LM3697_CTRL_B_BRT_MSB, 0x0}, + {LM3697_CTRL_ENABLE, 0x0}, +}; + +static const struct regmap_config lm3697_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LM3697_CTRL_ENABLE, + .reg_defaults = lm3697_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lm3697_reg_defs), + .cache_type = REGCACHE_FLAT, +}; + +static int lm3697_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brt_val) +{ + struct lm3697_led *led = container_of(led_cdev, struct lm3697_led, + led_dev); + int ctrl_en_val = (1 << led->control_bank); + int ret; + + mutex_lock(&led->priv->lock); + + if (brt_val == LED_OFF) { + ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE, + ctrl_en_val, ~ctrl_en_val); + if (ret) { + dev_err(&led->priv->client->dev, "Cannot write ctrl register\n"); + goto brightness_out; + } + + led->enabled = LED_OFF; + } else { + ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val); + if (ret) { + dev_err(&led->priv->client->dev, + "Cannot write brightness\n"); + goto brightness_out; + } + + if (!led->enabled) { + ret = regmap_update_bits(led->priv->regmap, + LM3697_CTRL_ENABLE, + ctrl_en_val, ctrl_en_val); + if (ret) { + dev_err(&led->priv->client->dev, + "Cannot enable the device\n"); + goto brightness_out; + } + + led->enabled = brt_val; + } + } + +brightness_out: + mutex_unlock(&led->priv->lock); + return ret; +} + +static int lm3697_init(struct lm3697 *priv) +{ + struct lm3697_led *led; + int i, ret; + + if (priv->enable_gpio) { + gpiod_direction_output(priv->enable_gpio, 1); + } else { + ret = regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET); + if (ret) { + dev_err(&priv->client->dev, "Cannot reset the device\n"); + goto out; + } + } + + ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0); + if (ret) { + dev_err(&priv->client->dev, "Cannot write ctrl enable\n"); + goto out; + } + + ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, priv->bank_cfg); + if (ret) + dev_err(&priv->client->dev, "Cannot write OUTPUT config\n"); + + for (i = 0; i < LM3697_MAX_CONTROL_BANKS; i++) { + led = &priv->leds[i]; + ret = ti_lmu_common_set_ramp(&led->lmu_data); + if (ret) + dev_err(&priv->client->dev, "Setting the ramp rate failed\n"); + } +out: + return ret; +} + +static int lm3697_probe_dt(struct lm3697 *priv) +{ + struct fwnode_handle *child = NULL; + struct lm3697_led *led; + const char *name; + int control_bank; + size_t i = 0; + int ret = -EINVAL; + int j; + + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev, + "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->enable_gpio)) { + ret = PTR_ERR(priv->enable_gpio); + dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n", + ret); + return ret; + } + + priv->regulator = devm_regulator_get(&priv->client->dev, "vled"); + if (IS_ERR(priv->regulator)) + priv->regulator = NULL; + + device_for_each_child_node(priv->dev, child) { + ret = fwnode_property_read_u32(child, "reg", &control_bank); + if (ret) { + dev_err(&priv->client->dev, "reg property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + if (control_bank > LM3697_CONTROL_B) { + dev_err(&priv->client->dev, "reg property is invalid\n"); + ret = -EINVAL; + fwnode_handle_put(child); + goto child_out; + } + + led = &priv->leds[i]; + + ret = ti_lmu_common_get_brt_res(&priv->client->dev, + child, &led->lmu_data); + if (ret) + dev_warn(&priv->client->dev, "brightness resolution property missing\n"); + + led->control_bank = control_bank; + led->lmu_data.regmap = priv->regmap; + led->lmu_data.runtime_ramp_reg = LM3697_CTRL_A_RAMP + + control_bank; + led->lmu_data.msb_brightness_reg = LM3697_CTRL_A_BRT_MSB + + led->control_bank * 2; + led->lmu_data.lsb_brightness_reg = LM3697_CTRL_A_BRT_LSB + + led->control_bank * 2; + + led->num_leds = fwnode_property_read_u32_array(child, + "led-sources", + NULL, 0); + + if (led->num_leds > LM3697_MAX_LED_STRINGS) { + dev_err(&priv->client->dev, "To many LED strings defined\n"); + continue; + } + + ret = fwnode_property_read_u32_array(child, "led-sources", + led->hvled_strings, + led->num_leds); + if (ret) { + dev_err(&priv->client->dev, "led-sources property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + for (j = 0; j < led->num_leds; j++) + priv->bank_cfg |= + (led->control_bank << led->hvled_strings[j]); + + ret = ti_lmu_common_get_ramp_params(&priv->client->dev, + child, &led->lmu_data); + if (ret) + dev_warn(&priv->client->dev, "runtime-ramp properties missing\n"); + + fwnode_property_read_string(child, "linux,default-trigger", + &led->led_dev.default_trigger); + + ret = fwnode_property_read_string(child, "label", &name); + if (ret) + snprintf(led->label, sizeof(led->label), + "%s::", priv->client->name); + else + snprintf(led->label, sizeof(led->label), + "%s:%s", priv->client->name, name); + + led->priv = priv; + led->led_dev.name = led->label; + led->led_dev.max_brightness = led->lmu_data.max_brightness; + led->led_dev.brightness_set_blocking = lm3697_brightness_set; + + ret = devm_led_classdev_register(priv->dev, &led->led_dev); + if (ret) { + dev_err(&priv->client->dev, "led register err: %d\n", + ret); + fwnode_handle_put(child); + goto child_out; + } + + i++; + } + +child_out: + return ret; +} + +static int lm3697_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm3697 *led; + int count; + int ret; + + count = device_get_child_node_count(&client->dev); + if (!count) { + dev_err(&client->dev, "LEDs are not defined in device tree!"); + return -ENODEV; + } + + led = devm_kzalloc(&client->dev, struct_size(led, leds, count), + GFP_KERNEL); + if (!led) + return -ENOMEM; + + mutex_init(&led->lock); + i2c_set_clientdata(client, led); + + led->client = client; + led->dev = &client->dev; + led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config); + if (IS_ERR(led->regmap)) { + ret = PTR_ERR(led->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + ret = lm3697_probe_dt(led); + if (ret) + return ret; + + return lm3697_init(led); +} + +static int lm3697_remove(struct i2c_client *client) +{ + struct lm3697 *led = i2c_get_clientdata(client); + int ret; + + ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE, + LM3697_CTRL_A_B_EN, 0); + if (ret) { + dev_err(&led->client->dev, "Failed to disable the device\n"); + return ret; + } + + if (led->enable_gpio) + gpiod_direction_output(led->enable_gpio, 0); + + if (led->regulator) { + ret = regulator_disable(led->regulator); + if (ret) + dev_err(&led->client->dev, + "Failed to disable regulator\n"); + } + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct i2c_device_id lm3697_id[] = { + { "lm3697", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm3697_id); + +static const struct of_device_id of_lm3697_leds_match[] = { + { .compatible = "ti,lm3697", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_lm3697_leds_match); + +static struct i2c_driver lm3697_driver = { + .driver = { + .name = "lm3697", + .of_match_table = of_lm3697_leds_match, + }, + .probe = lm3697_probe, + .remove = lm3697_remove, + .id_table = lm3697_id, +}; +module_i2c_driver(lm3697_driver); + +MODULE_DESCRIPTION("Texas Instruments LM3697 LED driver"); +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-ti-lmu-common.c b/drivers/leds/leds-ti-lmu-common.c new file mode 100644 index 000000000000..adc7293004f1 --- /dev/null +++ b/drivers/leds/leds-ti-lmu-common.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright 2015 Texas Instruments +// Copyright 2018 Sebastian Reichel +// Copyright 2018 Pavel Machek <pavel@ucw.cz> +// TI LMU LED common framework, based on previous work from +// Milo Kim <milo.kim@ti.com> + +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/of_device.h> + +#include <linux/leds-ti-lmu-common.h> + +const static int ramp_table[16] = {2048, 262000, 524000, 1049000, 2090000, + 4194000, 8389000, 16780000, 33550000, 41940000, + 50330000, 58720000, 67110000, 83880000, + 100660000, 117440000}; + +static int ti_lmu_common_update_brightness(struct ti_lmu_bank *lmu_bank, + int brightness) +{ + struct regmap *regmap = lmu_bank->regmap; + u8 reg, val; + int ret; + + /* + * Brightness register update + * + * 11 bit dimming: update LSB bits and write MSB byte. + * MSB brightness should be shifted. + * 8 bit dimming: write MSB byte. + */ + if (lmu_bank->max_brightness == MAX_BRIGHTNESS_11BIT) { + reg = lmu_bank->lsb_brightness_reg; + ret = regmap_update_bits(regmap, reg, + LMU_11BIT_LSB_MASK, + brightness); + if (ret) + return ret; + + val = brightness >> LMU_11BIT_MSB_SHIFT; + } else { + val = brightness; + } + + reg = lmu_bank->msb_brightness_reg; + + return regmap_write(regmap, reg, val); +} + +int ti_lmu_common_set_brightness(struct ti_lmu_bank *lmu_bank, int brightness) +{ + return ti_lmu_common_update_brightness(lmu_bank, brightness); +} +EXPORT_SYMBOL(ti_lmu_common_set_brightness); + +static int ti_lmu_common_convert_ramp_to_index(unsigned int usec) +{ + int size = ARRAY_SIZE(ramp_table); + int i; + + if (usec <= ramp_table[0]) + return 0; + + if (usec > ramp_table[size - 1]) + return size - 1; + + for (i = 1; i < size; i++) { + if (usec == ramp_table[i]) + return i; + + /* Find an approximate index by looking up the table */ + if (usec > ramp_table[i - 1] && usec < ramp_table[i]) { + if (usec - ramp_table[i - 1] < ramp_table[i] - usec) + return i - 1; + else + return i; + } + } + + return -EINVAL; +} + +int ti_lmu_common_set_ramp(struct ti_lmu_bank *lmu_bank) +{ + struct regmap *regmap = lmu_bank->regmap; + u8 ramp, ramp_up, ramp_down; + + if (lmu_bank->ramp_up_usec == 0 && lmu_bank->ramp_down_usec == 0) { + ramp_up = 0; + ramp_down = 0; + } else { + ramp_up = ti_lmu_common_convert_ramp_to_index(lmu_bank->ramp_up_usec); + ramp_down = ti_lmu_common_convert_ramp_to_index(lmu_bank->ramp_down_usec); + } + + if (ramp_up < 0 || ramp_down < 0) + return -EINVAL; + + ramp = (ramp_up << 4) | ramp_down; + + return regmap_write(regmap, lmu_bank->runtime_ramp_reg, ramp); + +} +EXPORT_SYMBOL(ti_lmu_common_set_ramp); + +int ti_lmu_common_get_ramp_params(struct device *dev, + struct fwnode_handle *child, + struct ti_lmu_bank *lmu_data) +{ + int ret; + + ret = fwnode_property_read_u32(child, "ramp-up-us", + &lmu_data->ramp_up_usec); + if (ret) + dev_warn(dev, "ramp-up-us property missing\n"); + + + ret = fwnode_property_read_u32(child, "ramp-down-us", + &lmu_data->ramp_down_usec); + if (ret) + dev_warn(dev, "ramp-down-us property missing\n"); + + return 0; +} +EXPORT_SYMBOL(ti_lmu_common_get_ramp_params); + +int ti_lmu_common_get_brt_res(struct device *dev, struct fwnode_handle *child, + struct ti_lmu_bank *lmu_data) +{ + int ret; + + ret = device_property_read_u32(dev, "ti,brightness-resolution", + &lmu_data->max_brightness); + if (ret) + ret = fwnode_property_read_u32(child, + "ti,brightness-resolution", + &lmu_data->max_brightness); + if (lmu_data->max_brightness <= 0) { + lmu_data->max_brightness = MAX_BRIGHTNESS_8BIT; + return ret; + } + + if (lmu_data->max_brightness > MAX_BRIGHTNESS_11BIT) + lmu_data->max_brightness = MAX_BRIGHTNESS_11BIT; + + + return 0; +} +EXPORT_SYMBOL(ti_lmu_common_get_brt_res); + +MODULE_DESCRIPTION("TI LMU common LED framework"); +MODULE_AUTHOR("Sebastian Reichel"); +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("ti-lmu-led-common"); |