summaryrefslogtreecommitdiffstats
path: root/drivers/macintosh/therm_pm72.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/macintosh/therm_pm72.h
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/macintosh/therm_pm72.h')
-rw-r--r--drivers/macintosh/therm_pm72.h297
1 files changed, 297 insertions, 0 deletions
diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h
new file mode 100644
index 000000000000..c17e61f9c418
--- /dev/null
+++ b/drivers/macintosh/therm_pm72.h
@@ -0,0 +1,297 @@
+#ifndef __THERM_PMAC_7_2_H__
+#define __THERM_PMAC_7_2_H__
+
+typedef unsigned short fu16;
+typedef int fs32;
+typedef short fs16;
+
+struct mpu_data
+{
+ u8 signature; /* 0x00 - EEPROM sig. */
+ u8 bytes_used; /* 0x01 - Bytes used in eeprom (160 ?) */
+ u8 size; /* 0x02 - EEPROM size (256 ?) */
+ u8 version; /* 0x03 - EEPROM version */
+ u32 data_revision; /* 0x04 - Dataset revision */
+ u8 processor_bin_code[3]; /* 0x08 - Processor BIN code */
+ u8 bin_code_expansion; /* 0x0b - ??? (padding ?) */
+ u8 processor_num; /* 0x0c - Number of CPUs on this MPU */
+ u8 input_mul_bus_div; /* 0x0d - Clock input multiplier/bus divider */
+ u8 reserved1[2]; /* 0x0e - */
+ u32 input_clk_freq_high; /* 0x10 - Input clock frequency high */
+ u8 cpu_nb_target_cycles; /* 0x14 - ??? */
+ u8 cpu_statlat; /* 0x15 - ??? */
+ u8 cpu_snooplat; /* 0x16 - ??? */
+ u8 cpu_snoopacc; /* 0x17 - ??? */
+ u8 nb_paamwin; /* 0x18 - ??? */
+ u8 nb_statlat; /* 0x19 - ??? */
+ u8 nb_snooplat; /* 0x1a - ??? */
+ u8 nb_snoopwin; /* 0x1b - ??? */
+ u8 api_bus_mode; /* 0x1c - ??? */
+ u8 reserved2[3]; /* 0x1d - */
+ u32 input_clk_freq_low; /* 0x20 - Input clock frequency low */
+ u8 processor_card_slot; /* 0x24 - Processor card slot number */
+ u8 reserved3[2]; /* 0x25 - */
+ u8 padjmax; /* 0x27 - Max power adjustment (Not in OF!) */
+ u8 ttarget; /* 0x28 - Target temperature */
+ u8 tmax; /* 0x29 - Max temperature */
+ u8 pmaxh; /* 0x2a - Max power */
+ u8 tguardband; /* 0x2b - Guardband temp ??? Hist. len in OSX */
+ fs32 pid_gp; /* 0x2c - PID proportional gain */
+ fs32 pid_gr; /* 0x30 - PID reset gain */
+ fs32 pid_gd; /* 0x34 - PID derivative gain */
+ fu16 voph; /* 0x38 - Vop High */
+ fu16 vopl; /* 0x3a - Vop Low */
+ fs16 nactual_die; /* 0x3c - nActual Die */
+ fs16 nactual_heatsink; /* 0x3e - nActual Heatsink */
+ fs16 nactual_system; /* 0x40 - nActual System */
+ u16 calibration_flags; /* 0x42 - Calibration flags */
+ fu16 mdiode; /* 0x44 - Diode M value (scaling factor) */
+ fs16 bdiode; /* 0x46 - Diode B value (offset) */
+ fs32 theta_heat_sink; /* 0x48 - Theta heat sink */
+ u16 rminn_intake_fan; /* 0x4c - Intake fan min RPM */
+ u16 rmaxn_intake_fan; /* 0x4e - Intake fan max RPM */
+ u16 rminn_exhaust_fan; /* 0x50 - Exhaust fan min RPM */
+ u16 rmaxn_exhaust_fan; /* 0x52 - Exhaust fan max RPM */
+ u8 processor_part_num[8]; /* 0x54 - Processor part number XX pumps min/max */
+ u32 processor_lot_num; /* 0x5c - Processor lot number */
+ u8 orig_card_sernum[0x10]; /* 0x60 - Card original serial number */
+ u8 curr_card_sernum[0x10]; /* 0x70 - Card current serial number */
+ u8 mlb_sernum[0x18]; /* 0x80 - MLB serial number */
+ u32 checksum1; /* 0x98 - */
+ u32 checksum2; /* 0x9c - */
+}; /* Total size = 0xa0 */
+
+/* Display a 16.16 fixed point value */
+#define FIX32TOPRINT(f) ((f) >> 16),((((f) & 0xffff) * 1000) >> 16)
+
+/*
+ * Maximum number of seconds to be in critical state (after a
+ * normal shutdown attempt). If the machine isn't down after
+ * this counter elapses, we force an immediate machine power
+ * off.
+ */
+#define MAX_CRITICAL_STATE 30
+static char * critical_overtemp_path = "/sbin/critical_overtemp";
+
+/*
+ * This option is "weird" :) Basically, if you define this to 1
+ * the control loop for the RPMs fans (not PWMs) will apply the
+ * correction factor obtained from the PID to the _actual_ RPM
+ * speed read from the FCU.
+ * If you define the below constant to 0, then it will be
+ * applied to the setpoint RPM speed, that is basically the
+ * speed we proviously "asked" for.
+ *
+ * I'm not sure which of these Apple's algorithm is supposed
+ * to use
+ */
+#define RPM_PID_USE_ACTUAL_SPEED 0
+
+/*
+ * i2c IDs. Currently, we hard code those and assume that
+ * the FCU is on U3 bus 1 while all sensors are on U3 bus
+ * 0. This appear to be safe enough for this first version
+ * of the driver, though I would accept any clean patch
+ * doing a better use of the device-tree without turning the
+ * while i2c registration mecanism into a racy mess
+ *
+ * Note: Xserve changed this. We have some bits on the K2 bus,
+ * which I arbitrarily set to 0x200. Ultimately, we really want
+ * too lookup these in the device-tree though
+ */
+#define FAN_CTRLER_ID 0x15e
+#define SUPPLY_MONITOR_ID 0x58
+#define SUPPLY_MONITORB_ID 0x5a
+#define DRIVES_DALLAS_ID 0x94
+#define BACKSIDE_MAX_ID 0x98
+#define XSERVE_DIMMS_LM87 0x25a
+
+/*
+ * Some MAX6690, DS1775, LM87 register definitions
+ */
+#define MAX6690_INT_TEMP 0
+#define MAX6690_EXT_TEMP 1
+#define DS1775_TEMP 0
+#define LM87_INT_TEMP 0x27
+
+/*
+ * Scaling factors for the AD7417 ADC converters (except
+ * for the CPU diode which is obtained from the EEPROM).
+ * Those values are obtained from the property list of
+ * the darwin driver
+ */
+#define ADC_12V_CURRENT_SCALE 0x0320 /* _AD2 */
+#define ADC_CPU_VOLTAGE_SCALE 0x00a0 /* _AD3 */
+#define ADC_CPU_CURRENT_SCALE 0x1f40 /* _AD4 */
+
+/*
+ * PID factors for the U3/Backside fan control loop. We have 2 sets
+ * of values here, one set for U3 and one set for U3H
+ */
+#define BACKSIDE_FAN_PWM_DEFAULT_ID 1
+#define BACKSIDE_FAN_PWM_INDEX 0
+#define BACKSIDE_PID_U3_G_d 0x02800000
+#define BACKSIDE_PID_U3H_G_d 0x01400000
+#define BACKSIDE_PID_RACK_G_d 0x00500000
+#define BACKSIDE_PID_G_p 0x00500000
+#define BACKSIDE_PID_RACK_G_p 0x0004cccc
+#define BACKSIDE_PID_G_r 0x00000000
+#define BACKSIDE_PID_U3_INPUT_TARGET 0x00410000
+#define BACKSIDE_PID_U3H_INPUT_TARGET 0x004b0000
+#define BACKSIDE_PID_RACK_INPUT_TARGET 0x00460000
+#define BACKSIDE_PID_INTERVAL 5
+#define BACKSIDE_PID_RACK_INTERVAL 1
+#define BACKSIDE_PID_OUTPUT_MAX 100
+#define BACKSIDE_PID_U3_OUTPUT_MIN 20
+#define BACKSIDE_PID_U3H_OUTPUT_MIN 20
+#define BACKSIDE_PID_HISTORY_SIZE 2
+
+struct basckside_pid_params
+{
+ s32 G_d;
+ s32 G_p;
+ s32 G_r;
+ s32 input_target;
+ s32 output_min;
+ s32 output_max;
+ s32 interval;
+ int additive;
+};
+
+struct backside_pid_state
+{
+ int ticks;
+ struct i2c_client * monitor;
+ s32 sample_history[BACKSIDE_PID_HISTORY_SIZE];
+ s32 error_history[BACKSIDE_PID_HISTORY_SIZE];
+ int cur_sample;
+ s32 last_temp;
+ int pwm;
+ int first;
+};
+
+/*
+ * PID factors for the Drive Bay fan control loop
+ */
+#define DRIVES_FAN_RPM_DEFAULT_ID 2
+#define DRIVES_FAN_RPM_INDEX 1
+#define DRIVES_PID_G_d 0x01e00000
+#define DRIVES_PID_G_p 0x00500000
+#define DRIVES_PID_G_r 0x00000000
+#define DRIVES_PID_INPUT_TARGET 0x00280000
+#define DRIVES_PID_INTERVAL 5
+#define DRIVES_PID_OUTPUT_MAX 4000
+#define DRIVES_PID_OUTPUT_MIN 300
+#define DRIVES_PID_HISTORY_SIZE 2
+
+struct drives_pid_state
+{
+ int ticks;
+ struct i2c_client * monitor;
+ s32 sample_history[BACKSIDE_PID_HISTORY_SIZE];
+ s32 error_history[BACKSIDE_PID_HISTORY_SIZE];
+ int cur_sample;
+ s32 last_temp;
+ int rpm;
+ int first;
+};
+
+#define SLOTS_FAN_PWM_DEFAULT_ID 2
+#define SLOTS_FAN_PWM_INDEX 2
+#define SLOTS_FAN_DEFAULT_PWM 50 /* Do better here ! */
+
+
+/*
+ * PID factors for the Xserve DIMM control loop
+ */
+#define DIMM_PID_G_d 0
+#define DIMM_PID_G_p 0
+#define DIMM_PID_G_r 0x6553600
+#define DIMM_PID_INPUT_TARGET 3276800
+#define DIMM_PID_INTERVAL 1
+#define DIMM_PID_OUTPUT_MAX 14000
+#define DIMM_PID_OUTPUT_MIN 4000
+#define DIMM_PID_HISTORY_SIZE 20
+
+struct dimm_pid_state
+{
+ int ticks;
+ struct i2c_client * monitor;
+ s32 sample_history[DIMM_PID_HISTORY_SIZE];
+ s32 error_history[DIMM_PID_HISTORY_SIZE];
+ int cur_sample;
+ s32 last_temp;
+ int first;
+ int output;
+};
+
+
+
+/* Desktops */
+
+#define CPUA_INTAKE_FAN_RPM_DEFAULT_ID 3
+#define CPUA_EXHAUST_FAN_RPM_DEFAULT_ID 4
+#define CPUB_INTAKE_FAN_RPM_DEFAULT_ID 5
+#define CPUB_EXHAUST_FAN_RPM_DEFAULT_ID 6
+
+#define CPUA_INTAKE_FAN_RPM_INDEX 3
+#define CPUA_EXHAUST_FAN_RPM_INDEX 4
+#define CPUB_INTAKE_FAN_RPM_INDEX 5
+#define CPUB_EXHAUST_FAN_RPM_INDEX 6
+
+#define CPU_INTAKE_SCALE 0x0000f852
+#define CPU_TEMP_HISTORY_SIZE 2
+#define CPU_POWER_HISTORY_SIZE 10
+#define CPU_PID_INTERVAL 1
+#define CPU_MAX_OVERTEMP 30
+
+#define CPUA_PUMP_RPM_INDEX 7
+#define CPUB_PUMP_RPM_INDEX 8
+#define CPU_PUMP_OUTPUT_MAX 3200
+#define CPU_PUMP_OUTPUT_MIN 1250
+
+/* Xserve */
+#define CPU_A1_FAN_RPM_INDEX 9
+#define CPU_A2_FAN_RPM_INDEX 10
+#define CPU_A3_FAN_RPM_INDEX 11
+#define CPU_B1_FAN_RPM_INDEX 12
+#define CPU_B2_FAN_RPM_INDEX 13
+#define CPU_B3_FAN_RPM_INDEX 14
+
+
+struct cpu_pid_state
+{
+ int index;
+ struct i2c_client * monitor;
+ struct mpu_data mpu;
+ int overtemp;
+ s32 temp_history[CPU_TEMP_HISTORY_SIZE];
+ int cur_temp;
+ s32 power_history[CPU_POWER_HISTORY_SIZE];
+ s32 error_history[CPU_POWER_HISTORY_SIZE];
+ int cur_power;
+ int count_power;
+ int rpm;
+ int intake_rpm;
+ s32 voltage;
+ s32 current_a;
+ s32 last_temp;
+ s32 last_power;
+ int first;
+ u8 adc_config;
+ s32 pump_min;
+ s32 pump_max;
+};
+
+/*
+ * Driver state
+ */
+enum {
+ state_detached,
+ state_attaching,
+ state_attached,
+ state_detaching,
+};
+
+
+#endif /* __THERM_PMAC_7_2_H__ */