diff options
author | Finn Thain <fthain@telegraphics.com.au> | 2018-07-02 04:21:19 -0400 |
---|---|---|
committer | Michael Ellerman <mpe@ellerman.id.au> | 2018-07-31 19:56:42 +1000 |
commit | ebd722275f9cfc6752e29d2412fa3816ca05764b (patch) | |
tree | 6796fcbf45ae49766e8121b2011bad37a289266c /drivers/macintosh | |
parent | 54c990775f78113a708f24e15877f6b7bd9a1277 (diff) | |
download | linux-ebd722275f9cfc6752e29d2412fa3816ca05764b.tar.gz linux-ebd722275f9cfc6752e29d2412fa3816ca05764b.tar.bz2 linux-ebd722275f9cfc6752e29d2412fa3816ca05764b.zip |
macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver
Now that the PowerMac via-pmu driver supports m68k PowerBooks,
switch over to that driver and remove the via-pmu68k driver.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diffstat (limited to 'drivers/macintosh')
-rw-r--r-- | drivers/macintosh/Kconfig | 13 | ||||
-rw-r--r-- | drivers/macintosh/Makefile | 1 | ||||
-rw-r--r-- | drivers/macintosh/adb.c | 2 | ||||
-rw-r--r-- | drivers/macintosh/via-pmu68k.c | 846 |
4 files changed, 2 insertions, 860 deletions
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 26abae4c899d..47c350cdfb12 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -39,17 +39,6 @@ config ADB_IOP <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct support for it, say 'Y' here. -config ADB_PMU68K - bool "Include PMU (Powerbook) ADB driver" - depends on ADB && MAC - help - Say Y here if want your kernel to support the m68k based Powerbooks. - This includes the PowerBook 140, PowerBook 145, PowerBook 150, - PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, - PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, - PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, - PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. - # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU config ADB_CUDA bool "Support for Cuda/Egret based Macs and PowerMacs" @@ -66,7 +55,7 @@ config ADB_CUDA config ADB_PMU bool "Support for PMU based PowerMacs and PowerBooks" - depends on PPC_PMAC + depends on PPC_PMAC || MAC help On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the PMU is an embedded microprocessor whose primary function is to diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index ee803638e595..49819b1b6f20 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_PMAC_SMU) += smu.o obj-$(CONFIG_ADB) += adb.o obj-$(CONFIG_ADB_MACII) += via-macii.o obj-$(CONFIG_ADB_IOP) += adb-iop.o -obj-$(CONFIG_ADB_PMU68K) += via-pmu68k.o obj-$(CONFIG_ADB_MACIO) += macio-adb.o obj-$(CONFIG_THERM_WINDTUNNEL) += therm_windtunnel.o diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c index 4c8097e0e6fe..76e98f0f7a3e 100644 --- a/drivers/macintosh/adb.c +++ b/drivers/macintosh/adb.c @@ -65,7 +65,7 @@ static struct adb_driver *adb_driver_list[] = { #ifdef CONFIG_ADB_IOP &adb_iop_driver, #endif -#if defined(CONFIG_ADB_PMU) || defined(CONFIG_ADB_PMU68K) +#ifdef CONFIG_ADB_PMU &via_pmu_driver, #endif #ifdef CONFIG_ADB_MACIO diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c deleted file mode 100644 index bec8e1837d7d..000000000000 --- a/drivers/macintosh/via-pmu68k.c +++ /dev/null @@ -1,846 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device driver for the PMU on 68K-based Apple PowerBooks - * - * The VIA (versatile interface adapter) interfaces to the PMU, - * a 6805 microprocessor core whose primary function is to control - * battery charging and system power on the PowerBooks. - * The PMU also controls the ADB (Apple Desktop Bus) which connects - * to the keyboard and mouse, as well as the non-volatile RAM - * and the RTC (real time clock) chip. - * - * Adapted for 68K PMU by Joshua M. Thompson - * - * Based largely on the PowerMac PMU code by Paul Mackerras and - * Fabio Riccardi. - * - * Also based on the PMU driver from MkLinux by Apple Computer, Inc. - * and the Open Software Foundation, Inc. - */ - -#include <stdarg.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/miscdevice.h> -#include <linux/blkdev.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/cuda.h> - -#include <asm/macintosh.h> -#include <asm/macints.h> -#include <asm/mac_via.h> - -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <linux/uaccess.h> - -/* Misc minor number allocated for /dev/pmu */ -#define PMU_MINOR 154 - -/* VIA registers - spaced 0x200 bytes apart */ -#define RS 0x200 /* skip between registers */ -#define B 0 /* B-side data */ -#define A RS /* A-side data */ -#define DIRB (2*RS) /* B-side direction (1=output) */ -#define DIRA (3*RS) /* A-side direction (1=output) */ -#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ -#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ -#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ -#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ -#define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */ -#define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */ -#define SR (10*RS) /* Shift register */ -#define ACR (11*RS) /* Auxiliary control register */ -#define PCR (12*RS) /* Peripheral control register */ -#define IFR (13*RS) /* Interrupt flag register */ -#define IER (14*RS) /* Interrupt enable register */ -#define ANH (15*RS) /* A-side data, no handshake */ - -/* Bits in B data register: both active low */ -#define TACK 0x02 /* Transfer acknowledge (input) */ -#define TREQ 0x04 /* Transfer request (output) */ - -/* Bits in ACR */ -#define SR_CTRL 0x1c /* Shift register control bits */ -#define SR_EXT 0x0c /* Shift on external clock */ -#define SR_OUT 0x10 /* Shift out if 1 */ - -/* Bits in IFR and IER */ -#define SR_INT 0x04 /* Shift register full/empty */ -#define CB1_INT 0x10 /* transition on CB1 input */ - -static enum pmu_state { - idle, - sending, - intack, - reading, - reading_intr, -} pmu_state; - -static struct adb_request *current_req; -static struct adb_request *last_req; -static struct adb_request *req_awaiting_reply; -static unsigned char interrupt_data[32]; -static unsigned char *reply_ptr; -static int data_index; -static int data_len; -static int adb_int_pending; -static int pmu_adb_flags; -static int adb_dev_map; -static struct adb_request bright_req_1, bright_req_2, bright_req_3; -static int pmu_kind = PMU_UNKNOWN; -static int pmu_fully_inited; - -int asleep; - -static int pmu_probe(void); -static int pmu_init(void); -static void pmu_start(void); -static irqreturn_t pmu_interrupt(int irq, void *arg); -static int pmu_send_request(struct adb_request *req, int sync); -static int pmu_autopoll(int devs); -void pmu_poll(void); -static int pmu_reset_bus(void); - -static int init_pmu(void); -static void pmu_start(void); -static void send_byte(int x); -static void recv_byte(void); -static void pmu_done(struct adb_request *req); -static void pmu_handle_data(unsigned char *data, int len); -static void set_volume(int level); -static void pmu_enable_backlight(int on); -static void pmu_set_brightness(int level); - -struct adb_driver via_pmu_driver = { - .name = "68K PMU", - .probe = pmu_probe, - .init = pmu_init, - .send_request = pmu_send_request, - .autopoll = pmu_autopoll, - .poll = pmu_poll, - .reset_bus = pmu_reset_bus, -}; - -/* - * This table indicates for each PMU opcode: - * - the number of data bytes to be sent with the command, or -1 - * if a length byte should be sent, - * - the number of response bytes which the PMU will return, or - * -1 if it will send a length byte. - */ -static s8 pmu_data_len[256][2] = { -/* 0 1 2 3 4 5 6 7 */ -/*00*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*08*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, -/*10*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*18*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0}, -/*20*/ {-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*28*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1}, -/*30*/ { 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*38*/ { 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0}, -/*40*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*48*/ { 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1}, -/*50*/ { 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0}, -/*58*/ { 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1}, -/*60*/ { 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*68*/ { 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1}, -/*70*/ { 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*78*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1}, -/*80*/ { 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*88*/ { 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, -/*90*/ { 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*98*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, -/*a0*/ { 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0}, -/*a8*/ { 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, -/*b0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*b8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, -/*c0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*c8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, -/*d0*/ { 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*d8*/ { 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1}, -/*e0*/ {-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0}, -/*e8*/ { 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0}, -/*f0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0}, -/*f8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1}, -}; - -int __init find_via_pmu(void) -{ - switch (macintosh_config->adb_type) { - case MAC_ADB_PB2: - pmu_kind = PMU_68K_V2; - break; - default: - pmu_kind = PMU_UNKNOWN; - return -ENODEV; - } - - pmu_state = idle; - - if (!init_pmu()) - goto fail_init; - - pr_info("adb: PMU 68K driver v0.5 for Unified ADB\n"); - - return 1; - -fail_init: - pmu_kind = PMU_UNKNOWN; - return 0; -} - -static int pmu_probe(void) -{ - if (pmu_kind == PMU_UNKNOWN) - return -ENODEV; - return 0; -} - -static int pmu_init(void) -{ - if (pmu_kind == PMU_UNKNOWN) - return -ENODEV; - return 0; -} - -static int __init via_pmu_start(void) -{ - if (pmu_kind == PMU_UNKNOWN) - return -ENODEV; - - if (request_irq(IRQ_MAC_ADB_SR, pmu_interrupt, 0, "PMU_SR", - pmu_interrupt)) { - pr_err("%s: can't get SR irq\n", __func__); - return -ENODEV; - } - if (request_irq(IRQ_MAC_ADB_CL, pmu_interrupt, 0, "PMU_CL", - pmu_interrupt)) { - pr_err("%s: can't get CL irq\n", __func__); - free_irq(IRQ_MAC_ADB_SR, pmu_interrupt); - return -ENODEV; - } - - pmu_fully_inited = 1; - - /* Enable backlight */ - pmu_enable_backlight(1); - - return 0; -} - -arch_initcall(via_pmu_start); - -static int __init init_pmu(void) -{ - int timeout; - volatile struct adb_request req; - - via2[B] |= TREQ; /* negate TREQ */ - via2[DIRB] = (via2[DIRB] | TREQ) & ~TACK; /* TACK in, TREQ out */ - - pmu_request((struct adb_request *) &req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB); - timeout = 100000; - while (!req.complete) { - if (--timeout < 0) { - printk(KERN_ERR "pmu_init: no response from PMU\n"); - return -EAGAIN; - } - udelay(10); - pmu_poll(); - } - - /* ack all pending interrupts */ - timeout = 100000; - interrupt_data[0] = 1; - while (interrupt_data[0] || pmu_state != idle) { - if (--timeout < 0) { - printk(KERN_ERR "pmu_init: timed out acking intrs\n"); - return -EAGAIN; - } - if (pmu_state == idle) { - adb_int_pending = 1; - pmu_interrupt(0, NULL); - } - pmu_poll(); - udelay(10); - } - - pmu_request((struct adb_request *) &req, NULL, 2, PMU_SET_INTR_MASK, - PMU_INT_ADB_AUTO|PMU_INT_SNDBRT|PMU_INT_ADB); - timeout = 100000; - while (!req.complete) { - if (--timeout < 0) { - printk(KERN_ERR "pmu_init: no response from PMU\n"); - return -EAGAIN; - } - udelay(10); - pmu_poll(); - } - - bright_req_1.complete = 1; - bright_req_2.complete = 1; - bright_req_3.complete = 1; - - return 1; -} - -int -pmu_get_model(void) -{ - return pmu_kind; -} - -/* Send an ADB command */ -static int -pmu_send_request(struct adb_request *req, int sync) -{ - int i, ret; - - if (!pmu_fully_inited) - { - req->complete = 1; - return -ENXIO; - } - - ret = -EINVAL; - - switch (req->data[0]) { - case PMU_PACKET: - for (i = 0; i < req->nbytes - 1; ++i) - req->data[i] = req->data[i+1]; - --req->nbytes; - if (pmu_data_len[req->data[0]][1] != 0) { - req->reply[0] = ADB_RET_OK; - req->reply_len = 1; - } else - req->reply_len = 0; - ret = pmu_queue_request(req); - break; - case CUDA_PACKET: - switch (req->data[1]) { - case CUDA_GET_TIME: - if (req->nbytes != 2) - break; - req->data[0] = PMU_READ_RTC; - req->nbytes = 1; - req->reply_len = 3; - req->reply[0] = CUDA_PACKET; - req->reply[1] = 0; - req->reply[2] = CUDA_GET_TIME; - ret = pmu_queue_request(req); - break; - case CUDA_SET_TIME: - if (req->nbytes != 6) - break; - req->data[0] = PMU_SET_RTC; - req->nbytes = 5; - for (i = 1; i <= 4; ++i) - req->data[i] = req->data[i+1]; - req->reply_len = 3; - req->reply[0] = CUDA_PACKET; - req->reply[1] = 0; - req->reply[2] = CUDA_SET_TIME; - ret = pmu_queue_request(req); - break; - case CUDA_GET_PRAM: - if (req->nbytes != 4) - break; - req->data[0] = PMU_READ_NVRAM; - req->data[1] = req->data[2]; - req->data[2] = req->data[3]; - req->nbytes = 3; - req->reply_len = 3; - req->reply[0] = CUDA_PACKET; - req->reply[1] = 0; - req->reply[2] = CUDA_GET_PRAM; - ret = pmu_queue_request(req); - break; - case CUDA_SET_PRAM: - if (req->nbytes != 5) - break; - req->data[0] = PMU_WRITE_NVRAM; - req->data[1] = req->data[2]; - req->data[2] = req->data[3]; - req->data[3] = req->data[4]; - req->nbytes = 4; - req->reply_len = 3; - req->reply[0] = CUDA_PACKET; - req->reply[1] = 0; - req->reply[2] = CUDA_SET_PRAM; - ret = pmu_queue_request(req); - break; - } - break; - case ADB_PACKET: - for (i = req->nbytes - 1; i > 1; --i) - req->data[i+2] = req->data[i]; - req->data[3] = req->nbytes - 2; - req->data[2] = pmu_adb_flags; - /*req->data[1] = req->data[1];*/ - req->data[0] = PMU_ADB_CMD; - req->nbytes += 2; - req->reply_expected = 1; - req->reply_len = 0; - ret = pmu_queue_request(req); - break; - } - if (ret) - { - req->complete = 1; - return ret; - } - - if (sync) { - while (!req->complete) - pmu_poll(); - } - - return 0; -} - -/* Enable/disable autopolling */ -static int -pmu_autopoll(int devs) -{ - struct adb_request req; - - if (!pmu_fully_inited) return -ENXIO; - - if (devs) { - adb_dev_map = devs; - pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86, - adb_dev_map >> 8, adb_dev_map); - pmu_adb_flags = 2; - } else { - pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF); - pmu_adb_flags = 0; - } - while (!req.complete) - pmu_poll(); - return 0; -} - -/* Reset the ADB bus */ -static int -pmu_reset_bus(void) -{ - struct adb_request req; - long timeout; - int save_autopoll = adb_dev_map; - - if (!pmu_fully_inited) return -ENXIO; - - /* anyone got a better idea?? */ - pmu_autopoll(0); - - req.nbytes = 5; - req.done = NULL; - req.data[0] = PMU_ADB_CMD; - req.data[1] = 0; - req.data[2] = 3; /* ADB_BUSRESET ??? */ - req.data[3] = 0; - req.data[4] = 0; - req.reply_len = 0; - req.reply_expected = 1; - if (pmu_queue_request(&req) != 0) - { - printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n"); - return -EIO; - } - while (!req.complete) - pmu_poll(); - timeout = 100000; - while (!req.complete) { - if (--timeout < 0) { - printk(KERN_ERR "pmu_adb_reset_bus (reset): no response from PMU\n"); - return -EIO; - } - udelay(10); - pmu_poll(); - } - - if (save_autopoll != 0) - pmu_autopoll(save_autopoll); - - return 0; -} - -/* Construct and send a pmu request */ -int -pmu_request(struct adb_request *req, void (*done)(struct adb_request *), - int nbytes, ...) -{ - va_list list; - int i; - - if (nbytes < 0 || nbytes > 32) { - printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes); - req->complete = 1; - return -EINVAL; - } - req->nbytes = nbytes; - req->done = done; - va_start(list, nbytes); - for (i = 0; i < nbytes; ++i) - req->data[i] = va_arg(list, int); - va_end(list); - if (pmu_data_len[req->data[0]][1] != 0) { - req->reply[0] = ADB_RET_OK; - req->reply_len = 1; - } else - req->reply_len = 0; - req->reply_expected = 0; - return pmu_queue_request(req); -} - -int -pmu_queue_request(struct adb_request *req) -{ - unsigned long flags; - int nsend; - - if (req->nbytes <= 0) { - req->complete = 1; - return 0; - } - nsend = pmu_data_len[req->data[0]][0]; - if (nsend >= 0 && req->nbytes != nsend + 1) { - req->complete = 1; - return -EINVAL; - } - - req->next = NULL; - req->sent = 0; - req->complete = 0; - local_irq_save(flags); - - if (current_req != 0) { - last_req->next = req; - last_req = req; - } else { - current_req = req; - last_req = req; - if (pmu_state == idle) - pmu_start(); - } - - local_irq_restore(flags); - return 0; -} - -static void -send_byte(int x) -{ - via1[ACR] |= SR_CTRL; - via1[SR] = x; - via2[B] &= ~TREQ; /* assert TREQ */ -} - -static void -recv_byte(void) -{ - char c; - - via1[ACR] = (via1[ACR] | SR_EXT) & ~SR_OUT; - c = via1[SR]; /* resets SR */ - via2[B] &= ~TREQ; -} - -static void -pmu_start(void) -{ - unsigned long flags; - struct adb_request *req; - - /* assert pmu_state == idle */ - /* get the packet to send */ - local_irq_save(flags); - req = current_req; - if (req == 0 || pmu_state != idle - || (req->reply_expected && req_awaiting_reply)) - goto out; - - pmu_state = sending; - data_index = 1; - data_len = pmu_data_len[req->data[0]][0]; - - /* set the shift register to shift out and send a byte */ - send_byte(req->data[0]); - -out: - local_irq_restore(flags); -} - -void -pmu_poll(void) -{ - unsigned long flags; - - local_irq_save(flags); - if (via1[IFR] & SR_INT) { - via1[IFR] = SR_INT; - pmu_interrupt(IRQ_MAC_ADB_SR, NULL); - } - if (via1[IFR] & CB1_INT) { - via1[IFR] = CB1_INT; - pmu_interrupt(IRQ_MAC_ADB_CL, NULL); - } - local_irq_restore(flags); -} - -static irqreturn_t -pmu_interrupt(int irq, void *dev_id) -{ - struct adb_request *req; - int timeout, bite = 0; /* to prevent compiler warning */ - -#if 0 - printk("pmu_interrupt: irq %d state %d acr %02X, b %02X data_index %d/%d adb_int_pending %d\n", - irq, pmu_state, (uint) via1[ACR], (uint) via2[B], data_index, data_len, adb_int_pending); -#endif - - if (irq == IRQ_MAC_ADB_CL) { /* CB1 interrupt */ - adb_int_pending = 1; - } else if (irq == IRQ_MAC_ADB_SR) { /* SR interrupt */ - if (via2[B] & TACK) { - printk(KERN_DEBUG "PMU: SR_INT but ack still high! (%x)\n", via2[B]); - } - - /* if reading grab the byte */ - if ((via1[ACR] & SR_OUT) == 0) bite = via1[SR]; - - /* reset TREQ and wait for TACK to go high */ - via2[B] |= TREQ; - timeout = 3200; - while (!(via2[B] & TACK)) { - if (--timeout < 0) { - printk(KERN_ERR "PMU not responding (!ack)\n"); - goto finish; - } - udelay(10); - } - - switch (pmu_state) { - case sending: - req = current_req; - if (data_len < 0) { - data_len = req->nbytes - 1; - send_byte(data_len); - break; - } - if (data_index <= data_len) { - send_byte(req->data[data_index++]); - break; - } - req->sent = 1; - data_len = pmu_data_len[req->data[0]][1]; - if (data_len == 0) { - pmu_state = idle; - current_req = req->next; - if (req->reply_expected) - req_awaiting_reply = req; - else - pmu_done(req); - } else { - pmu_state = reading; - data_index = 0; - reply_ptr = req->reply + req->reply_len; - recv_byte(); - } - break; - - case intack: - data_index = 0; - data_len = -1; - pmu_state = reading_intr; - reply_ptr = interrupt_data; - recv_byte(); - break; - - case reading: - case reading_intr: - if (data_len == -1) { - data_len = bite; - if (bite > 32) - printk(KERN_ERR "PMU: bad reply len %d\n", - bite); - } else { - reply_ptr[data_index++] = bite; - } - if (data_index < data_len) { - recv_byte(); - break; - } - - if (pmu_state == reading_intr) { - pmu_handle_data(interrupt_data, data_index); - } else { - req = current_req; - current_req = req->next; - req->reply_len += data_index; - pmu_done(req); - } - pmu_state = idle; - - break; - - default: - printk(KERN_ERR "pmu_interrupt: unknown state %d?\n", - pmu_state); - } - } -finish: - if (pmu_state == idle) { - if (adb_int_pending) { - pmu_state = intack; - send_byte(PMU_INT_ACK); - adb_int_pending = 0; - } else if (current_req) { - pmu_start(); - } - } - -#if 0 - printk("pmu_interrupt: exit state %d acr %02X, b %02X data_index %d/%d adb_int_pending %d\n", - pmu_state, (uint) via1[ACR], (uint) via2[B], data_index, data_len, adb_int_pending); -#endif - return IRQ_HANDLED; -} - -static void -pmu_done(struct adb_request *req) -{ - req->complete = 1; - if (req->done) - (*req->done)(req); -} - -/* Interrupt data could be the result data from an ADB cmd */ -static void -pmu_handle_data(unsigned char *data, int len) -{ - static int show_pmu_ints = 1; - - asleep = 0; - if (len < 1) { - adb_int_pending = 0; - return; - } - if (data[0] & PMU_INT_ADB) { - if ((data[0] & PMU_INT_ADB_AUTO) == 0) { - struct adb_request *req = req_awaiting_reply; - if (req == 0) { - printk(KERN_ERR "PMU: extra ADB reply\n"); - return; - } - req_awaiting_reply = NULL; - if (len <= 2) - req->reply_len = 0; - else { - memcpy(req->reply, data + 1, len - 1); - req->reply_len = len - 1; - } - pmu_done(req); - } else { - adb_input(data+1, len-1, 1); - } - } else { - if (data[0] == 0x08 && len == 3) { - /* sound/brightness buttons pressed */ - pmu_set_brightness(data[1] >> 3); - set_volume(data[2]); - } else if (show_pmu_ints - && !(data[0] == PMU_INT_TICK && len == 1)) { - int i; - printk(KERN_DEBUG "pmu intr"); - for (i = 0; i < len; ++i) - printk(" %.2x", data[i]); - printk("\n"); - } - } -} - -static int backlight_level = -1; -static int backlight_enabled = 0; - -#define LEVEL_TO_BRIGHT(lev) ((lev) < 1? 0x7f: 0x4a - ((lev) << 1)) - -static void -pmu_enable_backlight(int on) -{ - struct adb_request req; - - if (on) { - /* first call: get current backlight value */ - if (backlight_level < 0) { - switch(pmu_kind) { - case PMU_68K_V2: - pmu_request(&req, NULL, 3, PMU_READ_NVRAM, 0x14, 0xe); - while (!req.complete) - pmu_poll(); - printk(KERN_DEBUG "pmu: nvram returned bright: %d\n", (int)req.reply[1]); - backlight_level = req.reply[1]; - break; - default: - backlight_enabled = 0; - return; - } - } - pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, - LEVEL_TO_BRIGHT(backlight_level)); - while (!req.complete) - pmu_poll(); - } - pmu_request(&req, NULL, 2, PMU_POWER_CTRL, - PMU_POW_BACKLIGHT | (on ? PMU_POW_ON : PMU_POW_OFF)); - while (!req.complete) - pmu_poll(); - backlight_enabled = on; -} - -static void -pmu_set_brightness(int level) -{ - int bright; - - backlight_level = level; - bright = LEVEL_TO_BRIGHT(level); - if (!backlight_enabled) - return; - if (bright_req_1.complete) - pmu_request(&bright_req_1, NULL, 2, PMU_BACKLIGHT_BRIGHT, - bright); - if (bright_req_2.complete) - pmu_request(&bright_req_2, NULL, 2, PMU_POWER_CTRL, - PMU_POW_BACKLIGHT | (bright < 0x7f ? PMU_POW_ON : PMU_POW_OFF)); -} - -void -pmu_enable_irled(int on) -{ - struct adb_request req; - - pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED | - (on ? PMU_POW_ON : PMU_POW_OFF)); - while (!req.complete) - pmu_poll(); -} - -static void -set_volume(int level) -{ -} - -int -pmu_present(void) -{ - return (pmu_kind != PMU_UNKNOWN); -} |