[media] dvb-usb: move it to drivers/media/usb/dvb-usb

As media/dvb will be removed, move it to a proper place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 789 deletions

diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/dvb/dvb-usb/technisat-usb2.c
deleted file mode 100644
index acefaa89cc53..000000000000
--- a/drivers/media/dvb/dvb-usb/technisat-usb2.c
+++ /dev/null
@@ -1,789 +0,0 @@
-/*
- * Linux driver for Technisat DVB-S/S2 USB 2.0 device
- *
- * Copyright (C) 2010 Patrick Boettcher,
- *                    Kernel Labs Inc. PO Box 745, St James, NY 11780
- *
- * Development was sponsored by Technisat Digital UK Limited, whose
- * registered office is Witan Gate House 500 - 600 Witan Gate West,
- * Milton Keynes, MK9 1SH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * THIS PROGRAM IS PROVIDED "AS IS" AND BOTH THE COPYRIGHT HOLDER AND
- * TECHNISAT DIGITAL UK LTD DISCLAIM ALL WARRANTIES WITH REGARD TO
- * THIS PROGRAM INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
- * FITNESS FOR A PARTICULAR PURPOSE.  NEITHER THE COPYRIGHT HOLDER
- * NOR TECHNISAT DIGITAL UK LIMITED SHALL BE LIABLE FOR ANY SPECIAL,
- * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
- * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
- * IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS PROGRAM. See the
- * GNU General Public License for more details.
- */
-
-#define DVB_USB_LOG_PREFIX "technisat-usb2"
-#include "dvb-usb.h"
-
-#include "stv6110x.h"
-#include "stv090x.h"
-
-/* module parameters */
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug,
-		"set debugging level (bit-mask: 1=info,2=eeprom,4=i2c,8=rc)." \
-		DVB_USB_DEBUG_STATUS);
-
-/* disables all LED control command and
- * also does not start the signal polling thread */
-static int disable_led_control;
-module_param(disable_led_control, int, 0444);
-MODULE_PARM_DESC(disable_led_control,
-		"disable LED control of the device "
-		"(default: 0 - LED control is active).");
-
-/* device private data */
-struct technisat_usb2_state {
-	struct dvb_usb_device *dev;
-	struct delayed_work green_led_work;
-	u8 power_state;
-
-	u16 last_scan_code;
-};
-
-/* debug print helpers */
-#define deb_info(args...)    dprintk(debug, 0x01, args)
-#define deb_eeprom(args...)  dprintk(debug, 0x02, args)
-#define deb_i2c(args...)     dprintk(debug, 0x04, args)
-#define deb_rc(args...)      dprintk(debug, 0x08, args)
-
-/* vendor requests */
-#define SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST 0xB3
-#define SET_FRONT_END_RESET_VENDOR_REQUEST         0xB4
-#define GET_VERSION_INFO_VENDOR_REQUEST            0xB5
-#define SET_GREEN_LED_VENDOR_REQUEST               0xB6
-#define SET_RED_LED_VENDOR_REQUEST                 0xB7
-#define GET_IR_DATA_VENDOR_REQUEST                 0xB8
-#define SET_LED_TIMER_DIVIDER_VENDOR_REQUEST       0xB9
-#define SET_USB_REENUMERATION                      0xBA
-
-/* i2c-access methods */
-#define I2C_SPEED_100KHZ_BIT 0x40
-
-#define I2C_STATUS_NAK 7
-#define I2C_STATUS_OK 8
-
-static int technisat_usb2_i2c_access(struct usb_device *udev,
-		u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
-{
-	u8 b[64];
-	int ret, actual_length;
-
-	deb_i2c("i2c-access: %02x, tx: ", device_addr);
-	debug_dump(tx, txlen, deb_i2c);
-	deb_i2c(" ");
-
-	if (txlen > 62) {
-		err("i2c TX buffer can't exceed 62 bytes (dev 0x%02x)",
-				device_addr);
-		txlen = 62;
-	}
-	if (rxlen > 62) {
-		err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)",
-				device_addr);
-		txlen = 62;
-	}
-
-	b[0] = I2C_SPEED_100KHZ_BIT;
-	b[1] = device_addr << 1;
-
-	if (rx != NULL) {
-		b[0] |= rxlen;
-		b[1] |= 1;
-	}
-
-	memcpy(&b[2], tx, txlen);
-	ret = usb_bulk_msg(udev,
-			usb_sndbulkpipe(udev, 0x01),
-			b, 2 + txlen,
-			NULL, 1000);
-
-	if (ret < 0) {
-		err("i2c-error: out failed %02x = %d", device_addr, ret);
-		return -ENODEV;
-	}
-
-	ret = usb_bulk_msg(udev,
-			usb_rcvbulkpipe(udev, 0x01),
-			b, 64, &actual_length, 1000);
-	if (ret < 0) {
-		err("i2c-error: in failed %02x = %d", device_addr, ret);
-		return -ENODEV;
-	}
-
-	if (b[0] != I2C_STATUS_OK) {
-		err("i2c-error: %02x = %d", device_addr, b[0]);
-		/* handle tuner-i2c-nak */
-		if (!(b[0] == I2C_STATUS_NAK &&
-				device_addr == 0x60
-				/* && device_is_technisat_usb2 */))
-			return -ENODEV;
-	}
-
-	deb_i2c("status: %d, ", b[0]);
-
-	if (rx != NULL) {
-		memcpy(rx, &b[2], rxlen);
-
-		deb_i2c("rx (%d): ", rxlen);
-		debug_dump(rx, rxlen, deb_i2c);
-	}
-
-	deb_i2c("\n");
-
-	return 0;
-}
-
-static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
-				int num)
-{
-	int ret = 0, i;
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-
-	/* Ensure nobody else hits the i2c bus while we're sending our
-	   sequence of messages, (such as the remote control thread) */
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		if (i+1 < num && msg[i+1].flags & I2C_M_RD) {
-			ret = technisat_usb2_i2c_access(d->udev, msg[i+1].addr,
-						msg[i].buf, msg[i].len,
-						msg[i+1].buf, msg[i+1].len);
-			if (ret != 0)
-				break;
-			i++;
-		} else {
-			ret = technisat_usb2_i2c_access(d->udev, msg[i].addr,
-						msg[i].buf, msg[i].len,
-						NULL, 0);
-			if (ret != 0)
-				break;
-		}
-	}
-
-	if (ret == 0)
-		ret = i;
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-static u32 technisat_usb2_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm technisat_usb2_i2c_algo = {
-	.master_xfer   = technisat_usb2_i2c_xfer,
-	.functionality = technisat_usb2_i2c_func,
-};
-
-#if 0
-static void technisat_usb2_frontend_reset(struct usb_device *udev)
-{
-	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			SET_FRONT_END_RESET_VENDOR_REQUEST,
-			USB_TYPE_VENDOR | USB_DIR_OUT,
-			10, 0,
-			NULL, 0, 500);
-}
-#endif
-
-/* LED control */
-enum technisat_usb2_led_state {
-	LED_OFF,
-	LED_BLINK,
-	LED_ON,
-	LED_UNDEFINED
-};
-
-static int technisat_usb2_set_led(struct dvb_usb_device *d, int red, enum technisat_usb2_led_state state)
-{
-	int ret;
-
-	u8 led[8] = {
-		red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST,
-		0
-	};
-
-	if (disable_led_control && state != LED_OFF)
-		return 0;
-
-	switch (state) {
-	case LED_ON:
-		led[1] = 0x82;
-		break;
-	case LED_BLINK:
-		led[1] = 0x82;
-		if (red) {
-			led[2] = 0x02;
-			led[3] = 10;
-			led[4] = 10;
-		} else {
-			led[2] = 0xff;
-			led[3] = 50;
-			led[4] = 50;
-		}
-		led[5] = 1;
-		break;
-
-	default:
-	case LED_OFF:
-		led[1] = 0x80;
-		break;
-	}
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-		red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST,
-		USB_TYPE_VENDOR | USB_DIR_OUT,
-		0, 0,
-		led, sizeof(led), 500);
-
-	mutex_unlock(&d->i2c_mutex);
-	return ret;
-}
-
-static int technisat_usb2_set_led_timer(struct dvb_usb_device *d, u8 red, u8 green)
-{
-	int ret;
-	u8 b = 0;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-		SET_LED_TIMER_DIVIDER_VENDOR_REQUEST,
-		USB_TYPE_VENDOR | USB_DIR_OUT,
-		(red << 8) | green, 0,
-		&b, 1, 500);
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret;
-}
-
-static void technisat_usb2_green_led_control(struct work_struct *work)
-{
-	struct technisat_usb2_state *state =
-		container_of(work, struct technisat_usb2_state, green_led_work.work);
-	struct dvb_frontend *fe = state->dev->adapter[0].fe_adap[0].fe;
-
-	if (state->power_state == 0)
-		goto schedule;
-
-	if (fe != NULL) {
-		enum fe_status status;
-
-		if (fe->ops.read_status(fe, &status) != 0)
-			goto schedule;
-
-		if (status & FE_HAS_LOCK) {
-			u32 ber;
-
-			if (fe->ops.read_ber(fe, &ber) != 0)
-				goto schedule;
-
-			if (ber > 1000)
-				technisat_usb2_set_led(state->dev, 0, LED_BLINK);
-			else
-				technisat_usb2_set_led(state->dev, 0, LED_ON);
-		} else
-			technisat_usb2_set_led(state->dev, 0, LED_OFF);
-	}
-
-schedule:
-	schedule_delayed_work(&state->green_led_work,
-			msecs_to_jiffies(500));
-}
-
-/* method to find out whether the firmware has to be downloaded or not */
-static int technisat_usb2_identify_state(struct usb_device *udev,
-		struct dvb_usb_device_properties *props,
-		struct dvb_usb_device_description **desc, int *cold)
-{
-	int ret;
-	u8 version[3];
-
-	/* first select the interface */
-	if (usb_set_interface(udev, 0, 1) != 0)
-		err("could not set alternate setting to 0");
-	else
-		info("set alternate setting");
-
-	*cold = 0; /* by default do not download a firmware - just in case something is wrong */
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-		GET_VERSION_INFO_VENDOR_REQUEST,
-		USB_TYPE_VENDOR | USB_DIR_IN,
-		0, 0,
-		version, sizeof(version), 500);
-
-	if (ret < 0)
-		*cold = 1;
-	else {
-		info("firmware version: %d.%d", version[1], version[2]);
-		*cold = 0;
-	}
-
-	return 0;
-}
-
-/* power control */
-static int technisat_usb2_power_ctrl(struct dvb_usb_device *d, int level)
-{
-	struct technisat_usb2_state *state = d->priv;
-
-	state->power_state = level;
-
-	if (disable_led_control)
-		return 0;
-
-	/* green led is turned off in any case - will be turned on when tuning */
-	technisat_usb2_set_led(d, 0, LED_OFF);
-	/* red led is turned on all the time */
-	technisat_usb2_set_led(d, 1, LED_ON);
-	return 0;
-}
-
-/* mac address reading - from the eeprom */
-#if 0
-static void technisat_usb2_eeprom_dump(struct dvb_usb_device *d)
-{
-	u8 reg;
-	u8 b[16];
-	int i, j;
-
-	/* full EEPROM dump */
-	for (j = 0; j < 256 * 4; j += 16) {
-		reg = j;
-		if (technisat_usb2_i2c_access(d->udev, 0x50 + j / 256, &reg, 1, b, 16) != 0)
-			break;
-
-		deb_eeprom("EEPROM: %01x%02x: ", j / 256, reg);
-		for (i = 0; i < 16; i++)
-			deb_eeprom("%02x ", b[i]);
-		deb_eeprom("\n");
-	}
-}
-#endif
-
-static u8 technisat_usb2_calc_lrc(const u8 *b, u16 length)
-{
-	u8 lrc = 0;
-	while (--length)
-		lrc ^= *b++;
-	return lrc;
-}
-
-static int technisat_usb2_eeprom_lrc_read(struct dvb_usb_device *d,
-	u16 offset, u8 *b, u16 length, u8 tries)
-{
-	u8 bo = offset & 0xff;
-	struct i2c_msg msg[] = {
-		{
-			.addr = 0x50 | ((offset >> 8) & 0x3),
-			.buf = &bo,
-			.len = 1
-		}, {
-			.addr = 0x50 | ((offset >> 8) & 0x3),
-			.flags	= I2C_M_RD,
-			.buf = b,
-			.len = length
-		}
-	};
-
-	while (tries--) {
-		int status;
-
-		if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
-			break;
-
-		status =
-			technisat_usb2_calc_lrc(b, length - 1) == b[length - 1];
-
-		if (status)
-			return 0;
-	}
-
-	return -EREMOTEIO;
-}
-
-#define EEPROM_MAC_START 0x3f8
-#define EEPROM_MAC_TOTAL 8
-static int technisat_usb2_read_mac_address(struct dvb_usb_device *d,
-		u8 mac[])
-{
-	u8 buf[EEPROM_MAC_TOTAL];
-
-	if (technisat_usb2_eeprom_lrc_read(d, EEPROM_MAC_START,
-				buf, EEPROM_MAC_TOTAL, 4) != 0)
-		return -ENODEV;
-
-	memcpy(mac, buf, 6);
-	return 0;
-}
-
-/* frontend attach */
-static int technisat_usb2_set_voltage(struct dvb_frontend *fe,
-		fe_sec_voltage_t voltage)
-{
-	int i;
-	u8 gpio[3] = { 0 }; /* 0 = 2, 1 = 3, 2 = 4 */
-
-	gpio[2] = 1; /* high - voltage ? */
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		gpio[0] = 1;
-		break;
-	case SEC_VOLTAGE_18:
-		gpio[0] = 1;
-		gpio[1] = 1;
-		break;
-	default:
-	case SEC_VOLTAGE_OFF:
-		break;
-	}
-
-	for (i = 0; i < 3; i++)
-		if (stv090x_set_gpio(fe, i+2, 0, gpio[i], 0) != 0)
-			return -EREMOTEIO;
-	return 0;
-}
-
-static struct stv090x_config technisat_usb2_stv090x_config = {
-	.device         = STV0903,
-	.demod_mode     = STV090x_SINGLE,
-	.clk_mode       = STV090x_CLK_EXT,
-
-	.xtal           = 8000000,
-	.address        = 0x68,
-
-	.ts1_mode       = STV090x_TSMODE_DVBCI,
-	.ts1_clk        = 13400000,
-	.ts1_tei        = 1,
-
-	.repeater_level = STV090x_RPTLEVEL_64,
-
-	.tuner_bbgain   = 6,
-};
-
-static struct stv6110x_config technisat_usb2_stv6110x_config = {
-	.addr           = 0x60,
-	.refclk         = 16000000,
-	.clk_div        = 2,
-};
-
-static int technisat_usb2_frontend_attach(struct dvb_usb_adapter *a)
-{
-	struct usb_device *udev = a->dev->udev;
-	int ret;
-
-	a->fe_adap[0].fe = dvb_attach(stv090x_attach, &technisat_usb2_stv090x_config,
-			&a->dev->i2c_adap, STV090x_DEMODULATOR_0);
-
-	if (a->fe_adap[0].fe) {
-		struct stv6110x_devctl *ctl;
-
-		ctl = dvb_attach(stv6110x_attach,
-				a->fe_adap[0].fe,
-				&technisat_usb2_stv6110x_config,
-				&a->dev->i2c_adap);
-
-		if (ctl) {
-			technisat_usb2_stv090x_config.tuner_init          = ctl->tuner_init;
-			technisat_usb2_stv090x_config.tuner_sleep         = ctl->tuner_sleep;
-			technisat_usb2_stv090x_config.tuner_set_mode      = ctl->tuner_set_mode;
-			technisat_usb2_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
-			technisat_usb2_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
-			technisat_usb2_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
-			technisat_usb2_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
-			technisat_usb2_stv090x_config.tuner_set_bbgain    = ctl->tuner_set_bbgain;
-			technisat_usb2_stv090x_config.tuner_get_bbgain    = ctl->tuner_get_bbgain;
-			technisat_usb2_stv090x_config.tuner_set_refclk    = ctl->tuner_set_refclk;
-			technisat_usb2_stv090x_config.tuner_get_status    = ctl->tuner_get_status;
-
-			/* call the init function once to initialize
-			   tuner's clock output divider and demod's
-			   master clock */
-			if (a->fe_adap[0].fe->ops.init)
-				a->fe_adap[0].fe->ops.init(a->fe_adap[0].fe);
-
-			if (mutex_lock_interruptible(&a->dev->i2c_mutex) < 0)
-				return -EAGAIN;
-
-			ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-					SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST,
-					USB_TYPE_VENDOR | USB_DIR_OUT,
-					0, 0,
-					NULL, 0, 500);
-			mutex_unlock(&a->dev->i2c_mutex);
-
-			if (ret != 0)
-				err("could not set IF_CLK to external");
-
-			a->fe_adap[0].fe->ops.set_voltage = technisat_usb2_set_voltage;
-
-			/* if everything was successful assign a nice name to the frontend */
-			strlcpy(a->fe_adap[0].fe->ops.info.name, a->dev->desc->name,
-					sizeof(a->fe_adap[0].fe->ops.info.name));
-		} else {
-			dvb_frontend_detach(a->fe_adap[0].fe);
-			a->fe_adap[0].fe = NULL;
-		}
-	}
-
-	technisat_usb2_set_led_timer(a->dev, 1, 1);
-
-	return a->fe_adap[0].fe == NULL ? -ENODEV : 0;
-}
-
-/* Remote control */
-
-/* the device is giving providing raw IR-signals to the host mapping
- * it only to one remote control is just the default implementation
- */
-#define NOMINAL_IR_BIT_TRANSITION_TIME_US 889
-#define NOMINAL_IR_BIT_TIME_US (2 * NOMINAL_IR_BIT_TRANSITION_TIME_US)
-
-#define FIRMWARE_CLOCK_TICK 83333
-#define FIRMWARE_CLOCK_DIVISOR 256
-
-#define IR_PERCENT_TOLERANCE 15
-
-#define NOMINAL_IR_BIT_TRANSITION_TICKS ((NOMINAL_IR_BIT_TRANSITION_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK)
-#define NOMINAL_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICKS / FIRMWARE_CLOCK_DIVISOR)
-
-#define NOMINAL_IR_BIT_TIME_TICKS ((NOMINAL_IR_BIT_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK)
-#define NOMINAL_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICKS / FIRMWARE_CLOCK_DIVISOR)
-
-#define MINIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT - ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
-#define MAXIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT + ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
-
-#define MINIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT - ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
-#define MAXIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT + ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100))
-
-static int technisat_usb2_get_ir(struct dvb_usb_device *d)
-{
-	u8 buf[62], *b;
-	int ret;
-	struct ir_raw_event ev;
-
-	buf[0] = GET_IR_DATA_VENDOR_REQUEST;
-	buf[1] = 0x08;
-	buf[2] = 0x8f;
-	buf[3] = MINIMUM_IR_BIT_TRANSITION_TICK_COUNT;
-	buf[4] = MAXIMUM_IR_BIT_TIME_TICK_COUNT;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
-			GET_IR_DATA_VENDOR_REQUEST,
-			USB_TYPE_VENDOR | USB_DIR_OUT,
-			0, 0,
-			buf, 5, 500);
-	if (ret < 0)
-		goto unlock;
-
-	buf[1] = 0;
-	buf[2] = 0;
-	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
-			GET_IR_DATA_VENDOR_REQUEST,
-			USB_TYPE_VENDOR | USB_DIR_IN,
-			0x8080, 0,
-			buf, sizeof(buf), 500);
-
-unlock:
-	mutex_unlock(&d->i2c_mutex);
-
-	if (ret < 0)
-		return ret;
-
-	if (ret == 1)
-		return 0; /* no key pressed */
-
-	/* decoding */
-	b = buf+1;
-
-#if 0
-	deb_rc("RC: %d ", ret);
-	debug_dump(b, ret, deb_rc);
-#endif
-
-	ev.pulse = 0;
-	while (1) {
-		ev.pulse = !ev.pulse;
-		ev.duration = (*b * FIRMWARE_CLOCK_DIVISOR * FIRMWARE_CLOCK_TICK) / 1000;
-		ir_raw_event_store(d->rc_dev, &ev);
-
-		b++;
-		if (*b == 0xff) {
-			ev.pulse = 0;
-			ev.duration = 888888*2;
-			ir_raw_event_store(d->rc_dev, &ev);
-			break;
-		}
-	}
-
-	ir_raw_event_handle(d->rc_dev);
-
-	return 1;
-}
-
-static int technisat_usb2_rc_query(struct dvb_usb_device *d)
-{
-	int ret = technisat_usb2_get_ir(d);
-
-	if (ret < 0)
-		return ret;
-
-	if (ret == 0)
-		return 0;
-
-	if (!disable_led_control)
-		technisat_usb2_set_led(d, 1, LED_BLINK);
-
-	return 0;
-}
-
-/* DVB-USB and USB stuff follows */
-static struct usb_device_id technisat_usb2_id_table[] = {
-	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_DVB_S2) },
-	{ 0 }		/* Terminating entry */
-};
-
-/* device description */
-static struct dvb_usb_device_properties technisat_usb2_devices = {
-	.caps              = DVB_USB_IS_AN_I2C_ADAPTER,
-
-	.usb_ctrl          = CYPRESS_FX2,
-
-	.identify_state    = technisat_usb2_identify_state,
-	.firmware          = "dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw",
-
-	.size_of_priv      = sizeof(struct technisat_usb2_state),
-
-	.i2c_algo          = &technisat_usb2_i2c_algo,
-
-	.power_ctrl        = technisat_usb2_power_ctrl,
-	.read_mac_address  = technisat_usb2_read_mac_address,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach  = technisat_usb2_frontend_attach,
-
-			.stream = {
-				.type = USB_ISOC,
-				.count = 8,
-				.endpoint = 0x2,
-				.u = {
-					.isoc = {
-						.framesperurb = 32,
-						.framesize = 2048,
-						.interval = 3,
-					}
-				}
-			},
-		}},
-			.size_of_priv = 0,
-		},
-	},
-
-	.num_device_descs = 1,
-	.devices = {
-		{   "Technisat SkyStar USB HD (DVB-S/S2)",
-			{ &technisat_usb2_id_table[0], NULL },
-			{ NULL },
-		},
-	},
-
-	.rc.core = {
-		.rc_interval = 100,
-		.rc_codes    = RC_MAP_TECHNISAT_USB2,
-		.module_name = "technisat-usb2",
-		.rc_query    = technisat_usb2_rc_query,
-		.allowed_protos = RC_TYPE_ALL,
-		.driver_type    = RC_DRIVER_IR_RAW,
-	}
-};
-
-static int technisat_usb2_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	struct dvb_usb_device *dev;
-
-	if (dvb_usb_device_init(intf, &technisat_usb2_devices, THIS_MODULE,
-				&dev, adapter_nr) != 0)
-		return -ENODEV;
-
-	if (dev) {
-		struct technisat_usb2_state *state = dev->priv;
-		state->dev = dev;
-
-		if (!disable_led_control) {
-			INIT_DELAYED_WORK(&state->green_led_work,
-					technisat_usb2_green_led_control);
-			schedule_delayed_work(&state->green_led_work,
-					msecs_to_jiffies(500));
-		}
-	}
-
-	return 0;
-}
-
-static void technisat_usb2_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *dev = usb_get_intfdata(intf);
-
-	/* work and stuff was only created when the device is is hot-state */
-	if (dev != NULL) {
-		struct technisat_usb2_state *state = dev->priv;
-		if (state != NULL)
-			cancel_delayed_work_sync(&state->green_led_work);
-	}
-
-	dvb_usb_device_exit(intf);
-}
-
-static struct usb_driver technisat_usb2_driver = {
-	.name       = "dvb_usb_technisat_usb2",
-	.probe      = technisat_usb2_probe,
-	.disconnect = technisat_usb2_disconnect,
-	.id_table   = technisat_usb2_id_table,
-};
-
-module_usb_driver(technisat_usb2_driver);
-
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@kernellabs.com>");
-MODULE_DESCRIPTION("Driver for Technisat DVB-S/S2 USB 2.0 device");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");