Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 754 insertions, 0 deletions

diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
new file mode 100644
index 000000000000..5d524a4f213f
--- /dev/null
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -0,0 +1,754 @@
+/*
+ * budget-patch.c: driver for Budget Patch,
+ * hardware modification of DVB-S cards enabling full TS
+ *
+ * Written by Emard <emard@softhome.net>
+ *
+ * Original idea by Roberto Deza <rdeza@unav.es>
+ *
+ * Special thanks to Holger Waechtler, Michael Hunold, Marian Durkovic
+ * and Metzlerbros
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org/dvb/
+ */
+
+#include "av7110.h"
+#include "av7110_hw.h"
+#include "budget.h"
+#include "stv0299.h"
+#include "ves1x93.h"
+#include "tda8083.h"
+
+#define budget_patch budget
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH);
+//MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
+
+static struct pci_device_id pci_tbl[] = {
+        MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
+//        MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
+        {
+                .vendor    = 0,
+        }
+};
+
+/* those lines are for budget-patch to be tried
+** on a true budget card and observe the
+** behaviour of VSYNC generated by rps1.
+** this code was shamelessly copy/pasted from budget.c
+*/
+static void gpio_Set22K (struct budget *budget, int state)
+{
+	struct saa7146_dev *dev=budget->dev;
+	dprintk(2, "budget: %p\n", budget);
+	saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
+}
+
+/* Diseqc functions only for TT Budget card */
+/* taken from the Skyvision DVB driver by
+   Ralph Metzler <rjkm@metzlerbros.de> */
+
+static void DiseqcSendBit (struct budget *budget, int data)
+{
+	struct saa7146_dev *dev=budget->dev;
+	dprintk(2, "budget: %p\n", budget);
+
+	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+	udelay(data ? 500 : 1000);
+	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+	udelay(data ? 1000 : 500);
+}
+
+static void DiseqcSendByte (struct budget *budget, int data)
+{
+	int i, par=1, d;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	for (i=7; i>=0; i--) {
+		d = (data>>i)&1;
+		par ^= d;
+		DiseqcSendBit(budget, d);
+	}
+
+	DiseqcSendBit(budget, par);
+}
+
+static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
+{
+	struct saa7146_dev *dev=budget->dev;
+	int i;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+	mdelay(16);
+
+	for (i=0; i<len; i++)
+		DiseqcSendByte(budget, msg[i]);
+
+	mdelay(16);
+
+	if (burst!=-1) {
+		if (burst)
+			DiseqcSendByte(budget, 0xff);
+		else {
+			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+			udelay(12500);
+			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+/* shamelessly copy/pasted from budget.c
+*/
+static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		gpio_Set22K (budget, 1);
+		break;
+
+	case SEC_TONE_OFF:
+		gpio_Set22K (budget, 0);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+
+	SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
+
+	return 0;
+}
+
+static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+
+	SendDiSEqCMsg (budget, 0, NULL, minicmd);
+
+	return 0;
+}
+
+static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
+{
+        int i;
+
+        dprintk(2, "budget: %p\n", budget);
+
+        for (i = 2; i < length; i++)
+        {
+                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
+                  msleep(5);
+        }
+        if (length)
+                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
+        else
+                  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
+        msleep(5);
+        ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
+        msleep(5);
+        return 0;
+}
+
+static void av7110_set22k(struct budget_patch *budget, int state)
+{
+        u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
+
+        dprintk(2, "budget: %p\n", budget);
+        budget_av7110_send_fw_cmd(budget, buf, 2);
+}
+
+static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
+{
+        int i;
+        u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
+                16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+
+        dprintk(2, "budget: %p\n", budget);
+
+        if (len>10)
+                len=10;
+
+        buf[1] = len+2;
+        buf[2] = len;
+
+        if (burst != -1)
+                buf[3]=burst ? 0x01 : 0x00;
+        else
+                buf[3]=0xffff;
+
+        for (i=0; i<len; i++)
+                buf[i+4]=msg[i];
+
+        budget_av7110_send_fw_cmd(budget, buf, 18);
+        return 0;
+}
+
+static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		av7110_set22k (budget, 1);
+		break;
+
+	case SEC_TONE_OFF:
+		av7110_set22k (budget, 0);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int budget_patch_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+
+	av7110_send_diseqc_msg (budget, cmd->msg_len, cmd->msg, 0);
+
+	return 0;
+}
+
+static int budget_patch_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+
+	av7110_send_diseqc_msg (budget, 0, NULL, minicmd);
+
+	return 0;
+}
+
+static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+	u8 pwr = 0;
+	u8 buf[4];
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	u32 div = (params->frequency + 479500) / 125;
+
+	if (params->frequency > 2000000) pwr = 3;
+	else if (params->frequency > 1800000) pwr = 2;
+	else if (params->frequency > 1600000) pwr = 1;
+	else if (params->frequency > 1200000) pwr = 0;
+	else if (params->frequency >= 1100000) pwr = 1;
+	else pwr = 2;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = ((div & 0x18000) >> 10) | 0x95;
+	buf[3] = (pwr << 6) | 0x30;
+
+        // NOTE: since we're using a prescaler of 2, we set the
+	// divisor frequency to 62.5kHz and divide by 125 above
+
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
+
+static struct ves1x93_config alps_bsrv2_config = {
+	.demod_address = 0x08,
+	.xin = 90100000UL,
+	.invert_pwm = 0,
+	.pll_set = alps_bsrv2_pll_set,
+};
+
+static u8 alps_bsru6_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x00,
+	0x03, 0x00,
+        0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,   /* DAC not used, set to high impendance mode */
+	0x07, 0x00,   /* DAC LSB */
+	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
+	0x09, 0x00,   /* FIFO */
+	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,   // AGC2  0x3d
+	0x11, 0x84,
+	0x12, 0xb5,   // Lock detect: -64  Carrier freq detect:on
+	0x15, 0xc9,   // lock detector threshold
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0
+	0x29, 0x1e,  // 1/2 threshold
+	0x2a, 0x14,  // 2/3 threshold
+	0x2b, 0x0f,  // 3/4 threshold
+	0x2c, 0x09,  // 5/6 threshold
+	0x2d, 0x05,  // 7/8 threshold
+	0x2e, 0x01,
+	0x31, 0x1f,  // test all FECs
+	0x32, 0x19,  // viterbi and synchro search
+	0x33, 0xfc,  // rs control
+	0x34, 0x93,  // error control
+	0x0f, 0x52,
+	0xff, 0xff
+};
+
+static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+	stv0299_writereg (fe, 0x13, aclk);
+	stv0299_writereg (fe, 0x14, bclk);
+	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
+
+	return 0;
+}
+
+static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+	u8 data[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;
+
+	div = (params->frequency + (125 - 1)) / 125; // round correctly
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+	data[3] = 0xC4;
+
+	if (params->frequency > 1530000) data[3] = 0xc0;
+
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
+
+static struct stv0299_config alps_bsru6_config = {
+
+	.demod_address = 0x68,
+	.inittab = alps_bsru6_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.enhanced_tuning = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0229_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsru6_set_symbol_rate,
+	.pll_set = alps_bsru6_pll_set,
+};
+
+static int grundig_29504_451_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
+	u32 div;
+	u8 data[4];
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	div = params->frequency / 125;
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x8e;
+	data[3] = 0x00;
+
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
+
+static struct tda8083_config grundig_29504_451_config = {
+	.demod_address = 0x68,
+	.pll_set = grundig_29504_451_pll_set,
+};
+
+static void frontend_init(struct budget_patch* budget)
+{
+	switch(budget->dev->pci->subsystem_device) {
+	case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
+        case 0x1013: // SATELCO Multimedia PCI
+
+		// try the ALPS BSRV2 first of all
+		budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_patch_diseqc_send_master_cmd;
+			budget->dvb_frontend->ops->diseqc_send_burst = budget_patch_diseqc_send_burst;
+			budget->dvb_frontend->ops->set_tone = budget_patch_set_tone;
+			break;
+		}
+
+		// try the ALPS BSRU6 now
+		budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+			budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+			budget->dvb_frontend->ops->set_tone = budget_set_tone;
+			break;
+		}
+
+		// Try the grundig 29504-451
+		budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+			budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+			budget->dvb_frontend->ops->set_tone = budget_set_tone;
+			break;
+		}
+		break;
+	}
+
+	if (budget->dvb_frontend == NULL) {
+		printk("dvb-ttpci: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
+		       budget->dev->pci->vendor,
+		       budget->dev->pci->device,
+		       budget->dev->pci->subsystem_vendor,
+		       budget->dev->pci->subsystem_device);
+	} else {
+		if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
+			printk("budget-av: Frontend registration failed!\n");
+			if (budget->dvb_frontend->ops->release)
+				budget->dvb_frontend->ops->release(budget->dvb_frontend);
+			budget->dvb_frontend = NULL;
+		}
+	}
+}
+
+/* written by Emard */
+static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
+{
+        struct budget_patch *budget;
+        int err;
+	int count = 0;
+	int detected = 0;
+
+#define PATCH_RESET 0
+#define RPS_IRQ 0
+#define HPS_SETUP 0
+#if PATCH_RESET
+        saa7146_write(dev, MC1, MASK_31);
+        msleep(40);
+#endif
+#if HPS_SETUP
+        // initialize registers. Better to have it like this
+        // than leaving something unconfigured
+	saa7146_write(dev, DD1_STREAM_B, 0);
+	// port B VSYNC at rising edge
+	saa7146_write(dev, DD1_INIT, 0x00000200);  // have this in budget-core too!
+	saa7146_write(dev, BRS_CTRL, 0x00000000);  // VBI
+
+	// debi config
+	// saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
+
+        // zero all HPS registers
+        saa7146_write(dev, HPS_H_PRESCALE, 0);                  // r68
+        saa7146_write(dev, HPS_H_SCALE, 0);                     // r6c
+        saa7146_write(dev, BCS_CTRL, 0);                        // r70
+        saa7146_write(dev, HPS_V_SCALE, 0);                     // r60
+        saa7146_write(dev, HPS_V_GAIN, 0);                      // r64
+        saa7146_write(dev, CHROMA_KEY_RANGE, 0);                // r74
+        saa7146_write(dev, CLIP_FORMAT_CTRL, 0);                // r78
+        // Set HPS prescaler for port B input
+        saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
+        saa7146_write(dev, MC2,
+          0 * (MASK_08 | MASK_24)  |   // BRS control
+          0 * (MASK_09 | MASK_25)  |   // a
+          0 * (MASK_10 | MASK_26)  |   // b
+          1 * (MASK_06 | MASK_22)  |   // HPS_CTRL1
+          1 * (MASK_05 | MASK_21)  |   // HPS_CTRL2
+          0 * (MASK_01 | MASK_15)      // DEBI
+           );
+#endif
+	// Disable RPS1 and RPS0
+        saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
+        // RPS1 timeout disable
+        saa7146_write(dev, RPS_TOV1, 0);
+
+	// code for autodetection
+	// will wait for VBI_B event (vertical blank at port B)
+	// and will reset GPIO3 after VBI_B is detected.
+	// (GPIO3 should be raised high by CPU to
+	// test if GPIO3 will generate vertical blank signal
+	// in budget patch GPIO3 is connected to VSYNC_B
+	count = 0;
+#if 0
+	WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
+	  MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
+#endif
+        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
+        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+#if RPS_IRQ
+        // issue RPS1 interrupt to increment counter
+        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+        // at least a NOP is neede between two interrupts
+        WRITE_RPS1(cpu_to_le32(CMD_NOP));
+        // interrupt again
+        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+#endif
+        WRITE_RPS1(cpu_to_le32(CMD_STOP));
+
+#if RPS_IRQ
+        // set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
+        // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
+        // use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
+        saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
+        // set event counter 1 treshold to maximum allowed value        (rEC p55)
+        saa7146_write(dev, ECT1R,  0x3fff );
+#endif
+        // Fix VSYNC level
+        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+        // Set RPS1 Address register to point to RPS code               (r108 p42)
+        saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+        // Enable RPS1,                                                 (rFC p33)
+        saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
+
+
+        mdelay(50);
+        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+	mdelay(150);
+
+
+	if( (saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0)
+		detected = 1;
+
+#if RPS_IRQ
+        printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
+#endif
+	// Disable RPS1
+        saa7146_write(dev, MC1, ( MASK_29 ));
+
+	if(detected == 0)
+                printk("budget-patch not detected or saa7146 in non-default state.\n"
+                       "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
+
+	else
+                printk("BUDGET-PATCH DETECTED.\n");
+
+
+/*      OLD (Original design by Roberto Deza):
+**      This code will setup the SAA7146_RPS1 to generate a square
+**      wave on GPIO3, changing when a field (TS_HEIGHT/2 "lines" of
+**      TS_WIDTH packets) has been acquired on SAA7146_D1B video port;
+**      then, this GPIO3 output which is connected to the D1B_VSYNC
+**      input, will trigger the acquisition of the alternate field
+**      and so on.
+**      Currently, the TT_budget / WinTV_Nova cards have two ICs
+**      (74HCT4040, LVC74) for the generation of this VSYNC signal,
+**      which seems that can be done perfectly without this :-)).
+*/
+
+/*      New design (By Emard)
+**      this rps1 code will copy internal HS event to GPIO3 pin.
+**      GPIO3 is in budget-patch hardware connectd to port B VSYNC
+
+**      HS is an internal event of 7146, accessible with RPS
+**      and temporarily raised high every n lines
+**      (n in defined in the RPS_THRESH1 counter threshold)
+**      I think HS is raised high on the beginning of the n-th line
+**      and remains high until this n-th line that triggered
+**      it is completely received. When the receiption of n-th line
+**      ends, HS is lowered.
+
+**      To transmit data over DMA, 7146 needs changing state at
+**      port B VSYNC pin. Any changing of port B VSYNC will
+**      cause some DMA data transfer, with more or less packets loss.
+**      It depends on the phase and frequency of VSYNC and
+**      the way of 7146 is instructed to trigger on port B (defined
+**      in DD1_INIT register, 3rd nibble from the right valid
+**      numbers are 0-7, see datasheet)
+**
+**      The correct triggering can minimize packet loss,
+**      dvbtraffic should give this stable bandwidths:
+**        22k transponder = 33814 kbit/s
+**      27.5k transponder = 38045 kbit/s
+**      by experiment it is found that the best results
+**      (stable bandwidths and almost no packet loss)
+**      are obtained using DD1_INIT triggering number 2
+**      (Va at rising edge of VS Fa = HS x VS-failing forced toggle)
+**      and a VSYNC phase that occurs in the middle of DMA transfer
+**      (about byte 188*512=96256 in the DMA window).
+**
+**      Phase of HS is still not clear to me how to control,
+**      It just happens to be so. It can be seen if one enables
+**      RPS_IRQ and print Event Counter 1 in vpeirq(). Every
+**      time RPS_INTERRUPT is called, the Event Counter 1 will
+**      increment. That's how the 7146 is programmed to do event
+**      counting in this budget-patch.c
+**      I *think* HPS setting has something to do with the phase
+**      of HS but I cant be 100% sure in that.
+
+**      hardware debug note: a working budget card (including budget patch)
+**      with vpeirq() interrupt setup in mode "0x90" (every 64K) will
+**      generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
+**      and that means 3*25=75 Hz of interrupt freqency, as seen by
+**      watch cat /proc/interrupts
+**
+**      If this frequency is 3x lower (and data received in the DMA
+**      buffer don't start with 0x47, but in the middle of packets,
+**      whose lengths appear to be like 188 292 188 104 etc.
+**      this means VSYNC line is not connected in the hardware.
+**      (check soldering pcb and pins)
+**      The same behaviour of missing VSYNC can be duplicated on budget
+**      cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
+*/
+
+	// Setup RPS1 "program" (p35)
+        count = 0;
+
+
+        // Wait Source Line Counter Threshold                           (p36)
+        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+        // Set GPIO3=1                                                  (p42)
+        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+#if RPS_IRQ
+        // issue RPS1 interrupt
+        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+#endif
+        // Wait reset Source Line Counter Threshold                     (p36)
+        WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+        // Set GPIO3=0                                                  (p42)
+        WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+        WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+        WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+#if RPS_IRQ
+        // issue RPS1 interrupt
+        WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+#endif
+        // Jump to begin of RPS program                                 (p37)
+        WRITE_RPS1(cpu_to_le32(CMD_JUMP));
+        WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+
+        // Fix VSYNC level
+        saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+        // Set RPS1 Address register to point to RPS code               (r108 p42)
+        saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+        // Set Source Line Counter Threshold, using BRS                 (rCC p43)
+        // It generates HS event every TS_HEIGHT lines
+        // this is related to TS_WIDTH set in register
+        // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
+        // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
+        //,then RPS_THRESH1
+        // should be set to trigger every TS_HEIGHT (512) lines.
+        //
+        saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+
+        // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
+        // Enable RPS1                                                  (rFC p33)
+        saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+
+        if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
+                return -ENOMEM;
+
+        dprintk(2, "budget: %p\n", budget);
+
+        if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
+                kfree (budget);
+                return err;
+        }
+
+
+        dev->ext_priv = budget;
+
+	budget->dvb_adapter->priv = budget;
+	frontend_init(budget);
+
+        return 0;
+}
+
+static int budget_patch_detach (struct saa7146_dev* dev)
+{
+        struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
+        int err;
+
+	if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
+
+        err = ttpci_budget_deinit (budget);
+
+        kfree (budget);
+
+        return err;
+}
+
+static int __init budget_patch_init(void)
+{
+	return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_patch_exit(void)
+{
+        saa7146_unregister_extension(&budget_extension);
+}
+
+static struct saa7146_extension budget_extension = {
+        .name           = "budget_patch dvb\0",
+        .flags          = 0,
+
+        .module         = THIS_MODULE,
+        .pci_tbl        = pci_tbl,
+        .attach         = budget_patch_attach,
+        .detach         = budget_patch_detach,
+
+        .irq_mask       = MASK_10,
+        .irq_func       = ttpci_budget_irq10_handler,
+};
+
+module_init(budget_patch_init);
+module_exit(budget_patch_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
+MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
+                   "based so-called Budget Patch cards");