[media] v4l2-subdev: remove core.s_config and v4l2_i2c_new_subdev_cfg()

The core.s_config op was meant for legacy drivers that needed to work with old
pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was
incorrectly called from several drivers.

Replace those occurences with proper i2c_board_info structs and call
v4l2_i2c_new_subdev_board.

After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove
that function as well.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 34 insertions, 20 deletions

diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 209ff97261a9..4904d25f689f 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -12,17 +12,41 @@
 #include <asm/div64.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
-#include "mt9v011.h"
+#include <media/mt9v011.h>
 
 MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
 MODULE_LICENSE("GPL");
 
-
 static int debug;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0-2)");
 
+#define R00_MT9V011_CHIP_VERSION	0x00
+#define R01_MT9V011_ROWSTART		0x01
+#define R02_MT9V011_COLSTART		0x02
+#define R03_MT9V011_HEIGHT		0x03
+#define R04_MT9V011_WIDTH		0x04
+#define R05_MT9V011_HBLANK		0x05
+#define R06_MT9V011_VBLANK		0x06
+#define R07_MT9V011_OUT_CTRL		0x07
+#define R09_MT9V011_SHUTTER_WIDTH	0x09
+#define R0A_MT9V011_CLK_SPEED		0x0a
+#define R0B_MT9V011_RESTART		0x0b
+#define R0C_MT9V011_SHUTTER_DELAY	0x0c
+#define R0D_MT9V011_RESET		0x0d
+#define R1E_MT9V011_DIGITAL_ZOOM	0x1e
+#define R20_MT9V011_READ_MODE		0x20
+#define R2B_MT9V011_GREEN_1_GAIN	0x2b
+#define R2C_MT9V011_BLUE_GAIN		0x2c
+#define R2D_MT9V011_RED_GAIN		0x2d
+#define R2E_MT9V011_GREEN_2_GAIN	0x2e
+#define R35_MT9V011_GLOBAL_GAIN		0x35
+#define RF1_MT9V011_CHIP_ENABLE		0xf1
+
+#define MT9V011_VERSION			0x8232
+#define MT9V011_REV_B_VERSION		0x8243
+
 /* supported controls */
 static struct v4l2_queryctrl mt9v011_qctrl[] = {
 	{
@@ -469,23 +493,6 @@ static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt
 	return 0;
 }
 
-static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-	unsigned *xtal = data;
-
-	v4l2_dbg(1, debug, sd, "s_config called\n");
-
-	if (xtal) {
-		core->xtal = *xtal;
-		v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
-			 *xtal / 1000000, (*xtal / 1000) % 1000);
-	}
-
-	return 0;
-}
-
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int mt9v011_g_register(struct v4l2_subdev *sd,
 			      struct v4l2_dbg_register *reg)
@@ -536,7 +543,6 @@ static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
 	.g_ctrl = mt9v011_g_ctrl,
 	.s_ctrl = mt9v011_s_ctrl,
 	.reset = mt9v011_reset,
-	.s_config = mt9v011_s_config,
 	.g_chip_ident = mt9v011_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register = mt9v011_g_register,
@@ -596,6 +602,14 @@ static int mt9v011_probe(struct i2c_client *c,
 	core->height = 480;
 	core->xtal = 27000000;	/* Hz */
 
+	if (c->dev.platform_data) {
+		struct mt9v011_platform_data *pdata = c->dev.platform_data;
+
+		core->xtal = pdata->xtal;
+		v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
+			core->xtal / 1000000, (core->xtal / 1000) % 1000);
+	}
+
 	v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
 		 c->addr << 1, c->adapter->name, version);