[media] em28xx: add support for Hauppauge WinTV-dualHD DVB tuner

Hauppauge WinTV-dualHD is a USB 2.0 dual DVB-T/T2/C tuner with
following components:

USB bridge: Empia EM28274 (chip id is the same as EM28174)
Demodulator: 2x Silicon Labs Si2168-B40
Tuner: 2x Silicon Labs Si2157-A30

This patch adds support only for the first tuner.

The demodulator needs firmware, available for example here:
http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/4.0.11/

The demodulators sit on the same I2C bus and their addresses
are 0x64 and 0x67. The tuners are behind the demodulators and
their addresses are 0x60 and 0x63.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

4 files changed, 137 insertions, 0 deletions

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 57c3b905bf0a..e397f544f108 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -507,6 +507,30 @@ static struct em28xx_reg_seq plex_px_bcud[] = {
 };
 
 /*
+ * 2040:0265 Hauppauge WinTV-dualHD DVB
+ * reg 0x80/0x84:
+ * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
+ * GPIO_1: Green LED tuner 1, 0=on, 1=off
+ * GPIO_2: Yellow LED tuner 2, 0=on, 1=off
+ * GPIO_3: Green LED tuner 2, 0=on, 1=off
+ * GPIO_5: Reset #2, 0=active
+ * GPIO_6: Reset #1, 0=active
+ */
+static struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
+	{EM2874_R80_GPIO_P0_CTRL,      0xff, 0xff,      0},
+	{0x0d,                         0xff, 0xff,    200},
+	{0x50,                         0x04, 0xff,    300},
+	{EM2874_R80_GPIO_P0_CTRL,      0xbf, 0xff,    100}, /* demod 1 reset */
+	{EM2874_R80_GPIO_P0_CTRL,      0xff, 0xff,    100},
+	{EM2874_R80_GPIO_P0_CTRL,      0xdf, 0xff,    100}, /* demod 2 reset */
+	{EM2874_R80_GPIO_P0_CTRL,      0xff, 0xff,    100},
+	{EM2874_R5F_TS_ENABLE,         0x44, 0xff,     50},
+	{EM2874_R5D_TS1_PKT_SIZE,      0x05, 0xff,     50},
+	{EM2874_R5E_TS2_PKT_SIZE,      0x05, 0xff,     50},
+	{-1,                             -1,   -1,     -1},
+};
+
+/*
  *  Button definitions
  */
 static struct em28xx_button std_snapshot_button[] = {
@@ -585,6 +609,22 @@ static struct em28xx_led terratec_grabby_leds[] = {
 	{-1, 0, 0, 0},
 };
 
+static struct em28xx_led hauppauge_dualhd_leds[] = {
+	{
+		.role      = EM28XX_LED_DIGITAL_CAPTURING,
+		.gpio_reg  = EM2874_R80_GPIO_P0_CTRL,
+		.gpio_mask = EM_GPIO_1,
+		.inverted  = 1,
+	},
+	{
+		.role      = EM28XX_LED_DIGITAL_CAPTURING_TS2,
+		.gpio_reg  = EM2874_R80_GPIO_P0_CTRL,
+		.gpio_mask = EM_GPIO_3,
+		.inverted  = 1,
+	},
+	{-1, 0, 0, 0},
+};
+
 /*
  *  Board definitions
  */
@@ -2334,6 +2374,21 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_gpio    = plex_px_bcud,
 		.has_dvb       = 1,
 	},
+	/*
+	 * 2040:0265 Hauppauge WinTV-dualHD (DVB version).
+	 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
+	 */
+	[EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
+		.name          = "Hauppauge WinTV-dualHD DVB",
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_400_KHZ,
+		.tuner_type    = TUNER_ABSENT,
+		.tuner_gpio    = hauppauge_dualhd_dvb,
+		.has_dvb       = 1,
+		.ir_codes      = RC_MAP_HAUPPAUGE,
+		.leds          = hauppauge_dualhd_leds,
+	},
 };
 EXPORT_SYMBOL_GPL(em28xx_boards);
 
@@ -2457,6 +2512,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
 	{ USB_DEVICE(0x2040, 0x651f),
 			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
+	{ USB_DEVICE(0x2040, 0x0265),
+			.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
 	{ USB_DEVICE(0x0438, 0xb002),
 			.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
 	{ USB_DEVICE(0x2001, 0xf112),
@@ -2891,6 +2948,7 @@ static void em28xx_card_setup(struct em28xx *dev)
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
+	case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
 	{
 		struct tveeprom tv;
 
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index fbc4e4b3268e..1a5c01202f73 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -1883,6 +1883,70 @@ static int em28xx_dvb_init(struct em28xx *dev)
 			px_bcud_init(dev);
 		}
 		break;
+	case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
+		{
+			struct i2c_adapter *adapter;
+			struct i2c_client *client;
+			struct i2c_board_info info;
+			struct si2168_config si2168_config;
+			struct si2157_config si2157_config;
+
+			/* attach demod */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &dvb->fe[0];
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0x64;
+			info.platform_data = &si2168_config;
+			request_module(info.type);
+			client = i2c_new_device(&dev->i2c_adap[dev->def_i2c_bus], &info);
+			if (client == NULL || client->dev.driver == NULL) {
+				result = -ENODEV;
+				goto out_free;
+			}
+
+			if (!try_module_get(client->dev.driver->owner)) {
+				i2c_unregister_device(client);
+				result = -ENODEV;
+				goto out_free;
+			}
+
+			dvb->i2c_client_demod = client;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = dvb->fe[0];
+			si2157_config.if_port = 1;
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+			si2157_config.mdev = dev->media_dev;
+#endif
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module(info.type);
+			client = i2c_new_device(adapter, &info);
+			if (client == NULL || client->dev.driver == NULL) {
+				module_put(dvb->i2c_client_demod->dev.driver->owner);
+				i2c_unregister_device(dvb->i2c_client_demod);
+				result = -ENODEV;
+				goto out_free;
+			}
+
+			if (!try_module_get(client->dev.driver->owner)) {
+				i2c_unregister_device(client);
+				module_put(dvb->i2c_client_demod->dev.driver->owner);
+				i2c_unregister_device(dvb->i2c_client_demod);
+				result = -ENODEV;
+				goto out_free;
+			}
+
+			dvb->i2c_client_tuner = client;
+
+		}
+		break;
 	default:
 		em28xx_errdev("/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n");
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index 13cbb7f3ea10..afe7a66d7dc8 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -193,6 +193,19 @@
 /* em2874 registers */
 #define EM2874_R50_IR_CONFIG    0x50
 #define EM2874_R51_IR           0x51
+#define EM2874_R5D_TS1_PKT_SIZE 0x5d
+#define EM2874_R5E_TS2_PKT_SIZE 0x5e
+	/*
+	 * For both TS1 and TS2, In isochronous mode:
+	 *  0x01  188 bytes
+	 *  0x02  376 bytes
+	 *  0x03  564 bytes
+	 *  0x04  752 bytes
+	 *  0x05  940 bytes
+	 * In bulk mode:
+	 *  0x01..0xff  total packet count in 188-byte
+	 */
+
 #define EM2874_R5F_TS_ENABLE    0x5f
 
 /* em2874/174/84, em25xx, em276x/7x/8x GPIO registers */
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 9ad1240d5e22..d148463b22c1 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -146,6 +146,7 @@
 #define EM28178_BOARD_TERRATEC_T2_STICK_HD        96
 #define EM2884_BOARD_ELGATO_EYETV_HYBRID_2008     97
 #define EM28178_BOARD_PLEX_PX_BCUD                98
+#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB  99
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
@@ -407,6 +408,7 @@ enum em28xx_adecoder {
 enum em28xx_led_role {
 	EM28XX_LED_ANALOG_CAPTURING = 0,
 	EM28XX_LED_DIGITAL_CAPTURING,
+	EM28XX_LED_DIGITAL_CAPTURING_TS2,
 	EM28XX_LED_ILLUMINATION,
 	EM28XX_NUM_LED_ROLES, /* must be the last */
 };