mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups

Since a structure device is available now, use the dev_ macros instead
of the pr_ ones.

Clean some badly formatted comments.
Remove some unused variables.
Move some variable to the place they belong.
Clean some badly wrapped lines.
Align variable definition
Add missing braces in if-then-else block.
Add blank line for better readability.
Move stuff here and there...

Conflicts:

	drivers/mfd/twl-core.c

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 19 insertions, 14 deletions

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 764c5b5d914e..eb9bd203e497 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1178,17 +1178,15 @@ static int twl_remove(struct i2c_client *client)
 	return 0;
 }
 
-/* NOTE:  this driver only handles a single twl4030/tps659x0 chip */
+/* NOTE: This driver only handles a single twl4030/tps659x0 chip */
 static int __devinit
 twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
-	int				irq_base;
-	int				status;
-	unsigned			i;
 	struct twl4030_platform_data	*pdata = client->dev.platform_data;
 	struct device_node		*node = client->dev.of_node;
-	u8 temp;
-	int ret = 0;
+	int				irq_base = 0;
+	int				status;
+	unsigned			i;
 
 	if (node && !pdata) {
 		/*
@@ -1218,12 +1216,12 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	}
 
 	for (i = 0; i < TWL_NUM_SLAVES; i++) {
-		struct twl_client	*twl = &twl_modules[i];
+		struct twl_client *twl = &twl_modules[i];
 
 		twl->address = client->addr + i;
-		if (i == 0)
+		if (i == 0) {
 			twl->client = client;
-		else {
+		} else {
 			twl->client = i2c_new_dummy(client->adapter,
 					twl->address);
 			if (!twl->client) {
@@ -1235,7 +1233,9 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		}
 		mutex_init(&twl->xfer_lock);
 	}
+
 	inuse = true;
+
 	if ((id->driver_data) & TWL6030_CLASS) {
 		twl_id = TWL6030_CLASS_ID;
 		twl_map = &twl6030_map[0];
@@ -1249,8 +1249,8 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	/* read TWL IDCODE Register */
 	if (twl_id == TWL4030_CLASS_ID) {
-		ret = twl_read_idcode_register();
-		WARN(ret < 0, "Error: reading twl_idcode register value\n");
+		status = twl_read_idcode_register();
+		WARN(status < 0, "Error: reading twl_idcode register value\n");
 	}
 
 	/* load power event scripts */
@@ -1272,18 +1272,22 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		}
 	}
 
-	/* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
+	/*
+	 * Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
 	 * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0,
 	 * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0.
 	 */
-
 	if (twl_class_is_4030()) {
+		u8 temp;
+
 		twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1);
 		temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \
-		I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
+			I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
 		twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
 	}
 
+	status = -ENODEV;
+
 	if (node)
 		status = of_platform_populate(node, NULL, NULL, &client->dev);
 	if (status)
@@ -1292,6 +1296,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 fail:
 	if (status < 0)
 		twl_remove(client);
+
 	return status;
 }