mfd: twl4030 IRQ handling update

- Move it into a separate file; clean and streamline it
 - Restructure the init code for reuse during secondary dispatch
 - Support both levels (primary, secondary) of IRQ dispatch
 - Use a workqueue for irq mask/unmask and trigger configuration

Code for two subchips currently share that secondary handler code.
One is the power subchip; its IRQs are now handled by this core,
courtesy of this patch.  The other is the GPIO module, which will
be supported through a later patch.

There are also minor changes to the header file, mostly related
to GPIO support; nothing yet in mainline cares about those.  A
few references to OMAP-specific symbols are disabled; when they
can all be removed, the TWL4030 support ceases being OMAP-specific.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

1 files changed, 743 insertions, 0 deletions

diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
new file mode 100644
index 000000000000..fae868a8d499
--- /dev/null
+++ b/drivers/mfd/twl4030-irq.c
@@ -0,0 +1,743 @@
+/*
+ * twl4030-irq.c - TWL4030/TPS659x0 irq support
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kthread.h>
+
+#include <linux/i2c/twl4030.h>
+
+
+/*
+ * TWL4030 IRQ handling has two stages in hardware, and thus in software.
+ * The Primary Interrupt Handler (PIH) stage exposes status bits saying
+ * which Secondary Interrupt Handler (SIH) stage is raising an interrupt.
+ * SIH modules are more traditional IRQ components, which support per-IRQ
+ * enable/disable and trigger controls; they do most of the work.
+ *
+ * These chips are designed to support IRQ handling from two different
+ * I2C masters.  Each has a dedicated IRQ line, and dedicated IRQ status
+ * and mask registers in the PIH and SIH modules.
+ *
+ * We set up IRQs starting at a platform-specified base, always starting
+ * with PIH and the SIH for PWR_INT and then usually adding GPIO:
+ *	base + 0  .. base + 7	PIH
+ *	base + 8  .. base + 15	SIH for PWR_INT
+ *	base + 16 .. base + 33	SIH for GPIO
+ */
+
+/* PIH register offsets */
+#define REG_PIH_ISR_P1			0x01
+#define REG_PIH_ISR_P2			0x02
+#define REG_PIH_SIR			0x03	/* for testing */
+
+
+/* Linux could (eventually) use either IRQ line */
+static int irq_line;
+
+struct sih {
+	char	name[8];
+	u8	module;			/* module id */
+	u8	control_offset;		/* for SIH_CTRL */
+	bool	set_cor;
+
+	u8	bits;			/* valid in isr/imr */
+	u8	bytes_ixr;		/* bytelen of ISR/IMR/SIR */
+
+	u8	edr_offset;
+	u8	bytes_edr;		/* bytelen of EDR */
+
+	/* SIR ignored -- set interrupt, for testing only */
+	struct irq_data {
+		u8	isr_offset;
+		u8	imr_offset;
+	} mask[2];
+	/* + 2 bytes padding */
+};
+
+#define SIH_INITIALIZER(modname, nbits) \
+	.module		= TWL4030_MODULE_ ## modname, \
+	.control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
+	.bits		= nbits, \
+	.bytes_ixr	= DIV_ROUND_UP(nbits, 8), \
+	.edr_offset	= TWL4030_ ## modname ## _EDR, \
+	.bytes_edr	= DIV_ROUND_UP((2*(nbits)), 8), \
+	.mask = { { \
+		.isr_offset	= TWL4030_ ## modname ## _ISR1, \
+		.imr_offset	= TWL4030_ ## modname ## _IMR1, \
+	}, \
+	{ \
+		.isr_offset	= TWL4030_ ## modname ## _ISR2, \
+		.imr_offset	= TWL4030_ ## modname ## _IMR2, \
+	}, },
+
+/* register naming policies are inconsistent ... */
+#define TWL4030_INT_PWR_EDR		TWL4030_INT_PWR_EDR1
+#define TWL4030_MODULE_KEYPAD_KEYP	TWL4030_MODULE_KEYPAD
+#define TWL4030_MODULE_INT_PWR		TWL4030_MODULE_INT
+
+
+/* Order in this table matches order in PIH_ISR.  That is,
+ * BIT(n) in PIH_ISR is sih_modules[n].
+ */
+static const struct sih sih_modules[6] = {
+	[0] = {
+		.name		= "gpio",
+		.module		= TWL4030_MODULE_GPIO,
+		.control_offset	= REG_GPIO_SIH_CTRL,
+		.set_cor	= true,
+		.bits		= TWL4030_GPIO_MAX,
+		.bytes_ixr	= 3,
+		/* Note: *all* of these IRQs default to no-trigger */
+		.edr_offset	= REG_GPIO_EDR1,
+		.bytes_edr	= 5,
+		.mask = { {
+			.isr_offset	= REG_GPIO_ISR1A,
+			.imr_offset	= REG_GPIO_IMR1A,
+		}, {
+			.isr_offset	= REG_GPIO_ISR1B,
+			.imr_offset	= REG_GPIO_IMR1B,
+		}, },
+	},
+	[1] = {
+		.name		= "keypad",
+		.set_cor	= true,
+		SIH_INITIALIZER(KEYPAD_KEYP, 4)
+	},
+	[2] = {
+		.name		= "bci",
+		.module		= TWL4030_MODULE_INTERRUPTS,
+		.control_offset	= TWL4030_INTERRUPTS_BCISIHCTRL,
+		.bits		= 12,
+		.bytes_ixr	= 2,
+		.edr_offset	= TWL4030_INTERRUPTS_BCIEDR1,
+		/* Note: most of these IRQs default to no-trigger */
+		.bytes_edr	= 3,
+		.mask = { {
+			.isr_offset	= TWL4030_INTERRUPTS_BCIISR1A,
+			.imr_offset	= TWL4030_INTERRUPTS_BCIIMR1A,
+		}, {
+			.isr_offset	= TWL4030_INTERRUPTS_BCIISR1B,
+			.imr_offset	= TWL4030_INTERRUPTS_BCIIMR1B,
+		}, },
+	},
+	[3] = {
+		.name		= "madc",
+		SIH_INITIALIZER(MADC, 4)
+	},
+	[4] = {
+		/* USB doesn't use the same SIH organization */
+		.name		= "usb",
+	},
+	[5] = {
+		.name		= "power",
+		.set_cor	= true,
+		SIH_INITIALIZER(INT_PWR, 8)
+	},
+		/* there are no SIH modules #6 or #7 ... */
+};
+
+#undef TWL4030_MODULE_KEYPAD_KEYP
+#undef TWL4030_MODULE_INT_PWR
+#undef TWL4030_INT_PWR_EDR
+
+/*----------------------------------------------------------------------*/
+
+static unsigned twl4030_irq_base;
+
+static struct completion irq_event;
+
+/*
+ * This thread processes interrupts reported by the Primary Interrupt Handler.
+ */
+static int twl4030_irq_thread(void *data)
+{
+	long irq = (long)data;
+	irq_desc_t *desc = irq_desc + irq;
+	static unsigned i2c_errors;
+	const static unsigned max_i2c_errors = 100;
+
+	current->flags |= PF_NOFREEZE;
+
+	while (!kthread_should_stop()) {
+		int ret;
+		int module_irq;
+		u8 pih_isr;
+
+		/* Wait for IRQ, then read PIH irq status (also blocking) */
+		wait_for_completion_interruptible(&irq_event);
+
+		ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+					  REG_PIH_ISR_P1);
+		if (ret) {
+			pr_warning("twl4030: I2C error %d reading PIH ISR\n",
+					ret);
+			if (++i2c_errors >= max_i2c_errors) {
+				printk(KERN_ERR "Maximum I2C error count"
+						" exceeded.  Terminating %s.\n",
+						__func__);
+				break;
+			}
+			complete(&irq_event);
+			continue;
+		}
+
+		/* these handlers deal with the relevant SIH irq status */
+		local_irq_disable();
+		for (module_irq = twl4030_irq_base;
+				pih_isr;
+				pih_isr >>= 1, module_irq++) {
+			if (pih_isr & 0x1) {
+				irq_desc_t *d = irq_desc + module_irq;
+
+				/* These can't be masked ... always warn
+				 * if we get any surprises.
+				 */
+				if (d->status & IRQ_DISABLED)
+					note_interrupt(module_irq, d,
+							IRQ_NONE);
+				else
+					d->handle_irq(module_irq, d);
+			}
+		}
+		local_irq_enable();
+
+		desc->chip->unmask(irq);
+	}
+
+	return 0;
+}
+
+/*
+ * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
+ * This is a chained interrupt, so there is no desc->action method for it.
+ * Now we need to query the interrupt controller in the twl4030 to determine
+ * which module is generating the interrupt request.  However, we can't do i2c
+ * transactions in interrupt context, so we must defer that work to a kernel
+ * thread.  All we do here is acknowledge and mask the interrupt and wakeup
+ * the kernel thread.
+ */
+static void handle_twl4030_pih(unsigned int irq, irq_desc_t *desc)
+{
+	/* Acknowledge, clear *AND* mask the interrupt... */
+	desc->chip->ack(irq);
+	complete(&irq_event);
+}
+
+static struct task_struct *start_twl4030_irq_thread(long irq)
+{
+	struct task_struct *thread;
+
+	init_completion(&irq_event);
+	thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
+	if (!thread)
+		pr_err("twl4030: could not create irq %ld thread!\n", irq);
+
+	return thread;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * twl4030_init_sih_modules() ... start from a known state where no
+ * IRQs will be coming in, and where we can quickly enable them then
+ * handle them as they arrive.  Mask all IRQs: maybe init SIH_CTRL.
+ *
+ * NOTE:  we don't touch EDR registers here; they stay with hardware
+ * defaults or whatever the last value was.  Note that when both EDR
+ * bits for an IRQ are clear, that's as if its IMR bit is set...
+ */
+static int twl4030_init_sih_modules(unsigned line)
+{
+	const struct sih *sih;
+	u8 buf[4];
+	int i;
+	int status;
+
+	/* line 0 == int1_n signal; line 1 == int2_n signal */
+	if (line > 1)
+		return -EINVAL;
+
+	irq_line = line;
+
+	/* disable all interrupts on our line */
+	memset(buf, 0xff, sizeof buf);
+	sih = sih_modules;
+	for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+
+		/* skip USB -- it's funky */
+		if (!sih->bytes_ixr)
+			continue;
+
+		status = twl4030_i2c_write(sih->module, buf,
+				sih->mask[line].imr_offset, sih->bytes_ixr);
+		if (status < 0)
+			pr_err("twl4030: err %d initializing %s %s\n",
+					status, sih->name, "IMR");
+
+		/* Maybe disable "exclusive" mode; buffer second pending irq;
+		 * set Clear-On-Read (COR) bit.
+		 *
+		 * NOTE that sometimes COR polarity is documented as being
+		 * inverted:  for MADC and BCI, COR=1 means "clear on write".
+		 * And for PWR_INT it's not documented...
+		 */
+		if (sih->set_cor) {
+			status = twl4030_i2c_write_u8(sih->module,
+					TWL4030_SIH_CTRL_COR_MASK,
+					sih->control_offset);
+			if (status < 0)
+				pr_err("twl4030: err %d initializing %s %s\n",
+						status, sih->name, "SIH_CTRL");
+		}
+	}
+
+	sih = sih_modules;
+	for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+		u8 rxbuf[4];
+		int j;
+
+		/* skip USB */
+		if (!sih->bytes_ixr)
+			continue;
+
+		/* Clear pending interrupt status.  Either the read was
+		 * enough, or we need to write those bits.  Repeat, in
+		 * case an IRQ is pending (PENDDIS=0) ... that's not
+		 * uncommon with PWR_INT.PWRON.
+		 */
+		for (j = 0; j < 2; j++) {
+			status = twl4030_i2c_read(sih->module, rxbuf,
+				sih->mask[line].isr_offset, sih->bytes_ixr);
+			if (status < 0)
+				pr_err("twl4030: err %d initializing %s %s\n",
+					status, sih->name, "ISR");
+
+			if (!sih->set_cor)
+				status = twl4030_i2c_write(sih->module, buf,
+					sih->mask[line].isr_offset,
+					sih->bytes_ixr);
+			/* else COR=1 means read sufficed.
+			 * (for most SIH modules...)
+			 */
+		}
+	}
+
+	return 0;
+}
+
+static inline void activate_irq(int irq)
+{
+#ifdef CONFIG_ARM
+	/* ARM requires an extra step to clear IRQ_NOREQUEST, which it
+	 * sets on behalf of every irq_chip.  Also sets IRQ_NOPROBE.
+	 */
+	set_irq_flags(irq, IRQF_VALID);
+#else
+	/* same effect on other architectures */
+	set_irq_noprobe(irq);
+#endif
+}
+
+/*----------------------------------------------------------------------*/
+
+static DEFINE_SPINLOCK(sih_agent_lock);
+
+static struct workqueue_struct *wq;
+
+struct sih_agent {
+	int			irq_base;
+	const struct sih	*sih;
+
+	u32			imr;
+	bool			imr_change_pending;
+	struct work_struct	mask_work;
+
+	u32			edge_change;
+	struct work_struct	edge_work;
+};
+
+static void twl4030_sih_do_mask(struct work_struct *work)
+{
+	struct sih_agent	*agent;
+	const struct sih	*sih;
+	union {
+		u8	bytes[4];
+		u32	word;
+	}			imr;
+	int			status;
+
+	agent = container_of(work, struct sih_agent, mask_work);
+
+	/* see what work we have */
+	spin_lock_irq(&sih_agent_lock);
+	if (agent->imr_change_pending) {
+		sih = agent->sih;
+		/* byte[0] gets overwritten as we write ... */
+		imr.word = cpu_to_le32(agent->imr << 8);
+		agent->imr_change_pending = false;
+	} else
+		sih = NULL;
+	spin_unlock_irq(&sih_agent_lock);
+	if (!sih)
+		return;
+
+	/* write the whole mask ... simpler than subsetting it */
+	status = twl4030_i2c_write(sih->module, imr.bytes,
+			sih->mask[irq_line].imr_offset, sih->bytes_ixr);
+	if (status)
+		pr_err("twl4030: %s, %s --> %d\n", __func__,
+				"write", status);
+}
+
+static void twl4030_sih_do_edge(struct work_struct *work)
+{
+	struct sih_agent	*agent;
+	const struct sih	*sih;
+	u8			bytes[6];
+	u32			edge_change;
+	int			status;
+
+	agent = container_of(work, struct sih_agent, edge_work);
+
+	/* see what work we have */
+	spin_lock_irq(&sih_agent_lock);
+	edge_change = agent->edge_change;
+	agent->edge_change = 0;;
+	sih = edge_change ? agent->sih : NULL;
+	spin_unlock_irq(&sih_agent_lock);
+	if (!sih)
+		return;
+
+	/* Read, reserving first byte for write scratch.  Yes, this
+	 * could be cached for some speedup ... but be careful about
+	 * any processor on the other IRQ line, EDR registers are
+	 * shared.
+	 */
+	status = twl4030_i2c_read(sih->module, bytes + 1,
+			sih->edr_offset, sih->bytes_edr);
+	if (status) {
+		pr_err("twl4030: %s, %s --> %d\n", __func__,
+				"read", status);
+		return;
+	}
+
+	/* Modify only the bits we know must change */
+	while (edge_change) {
+		int		i = fls(edge_change) - 1;
+		struct irq_desc	*d = irq_desc + i + agent->irq_base;
+		int		byte = 1 + (i >> 2);
+		int		off = (i & 0x3) * 2;
+
+		bytes[byte] &= ~(0x03 << off);
+
+		spin_lock_irq(&d->lock);
+		if (d->status & IRQ_TYPE_EDGE_RISING)
+			bytes[byte] |= BIT(off + 1);
+		if (d->status & IRQ_TYPE_EDGE_FALLING)
+			bytes[byte] |= BIT(off + 0);
+		spin_unlock_irq(&d->lock);
+
+		edge_change &= ~BIT(i);
+	}
+
+	/* Write */
+	status = twl4030_i2c_write(sih->module, bytes,
+			sih->edr_offset, sih->bytes_edr);
+	if (status)
+		pr_err("twl4030: %s, %s --> %d\n", __func__,
+				"write", status);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * All irq_chip methods get issued from code holding irq_desc[irq].lock,
+ * which can't perform the underlying I2C operations (because they sleep).
+ * So we must hand them off to a thread (workqueue) and cope with asynch
+ * completion, potentially including some re-ordering, of these requests.
+ */
+
+static void twl4030_sih_mask(unsigned irq)
+{
+	struct sih_agent *sih = get_irq_chip_data(irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sih_agent_lock, flags);
+	sih->imr |= BIT(irq - sih->irq_base);
+	sih->imr_change_pending = true;
+	queue_work(wq, &sih->mask_work);
+	spin_unlock_irqrestore(&sih_agent_lock, flags);
+}
+
+static void twl4030_sih_unmask(unsigned irq)
+{
+	struct sih_agent *sih = get_irq_chip_data(irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sih_agent_lock, flags);
+	sih->imr &= ~BIT(irq - sih->irq_base);
+	sih->imr_change_pending = true;
+	queue_work(wq, &sih->mask_work);
+	spin_unlock_irqrestore(&sih_agent_lock, flags);
+}
+
+static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
+{
+	struct sih_agent *sih = get_irq_chip_data(irq);
+	struct irq_desc *desc = irq_desc + irq;
+	unsigned long flags;
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	spin_lock_irqsave(&sih_agent_lock, flags);
+	if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) {
+		desc->status &= ~IRQ_TYPE_SENSE_MASK;
+		desc->status |= trigger;
+		sih->edge_change |= BIT(irq - sih->irq_base);
+		queue_work(wq, &sih->edge_work);
+	}
+	spin_unlock_irqrestore(&sih_agent_lock, flags);
+	return 0;
+}
+
+static struct irq_chip twl4030_sih_irq_chip = {
+	.name		= "twl4030",
+	.mask		= twl4030_sih_mask,
+	.unmask		= twl4030_sih_unmask,
+	.set_type	= twl4030_sih_set_type,
+};
+
+/*----------------------------------------------------------------------*/
+
+static inline int sih_read_isr(const struct sih *sih)
+{
+	int status;
+	union {
+		u8 bytes[4];
+		u32 word;
+	} isr;
+
+	/* FIXME need retry-on-error ... */
+
+	isr.word = 0;
+	status = twl4030_i2c_read(sih->module, isr.bytes,
+			sih->mask[irq_line].isr_offset, sih->bytes_ixr);
+
+	return (status < 0) ? status : le32_to_cpu(isr.word);
+}
+
+/*
+ * Generic handler for SIH interrupts ... we "know" this is called
+ * in task context, with IRQs enabled.
+ */
+static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc)
+{
+	struct sih_agent *agent = get_irq_data(irq);
+	const struct sih *sih = agent->sih;
+	int isr;
+
+	/* reading ISR acks the IRQs, using clear-on-read mode */
+	local_irq_enable();
+	isr = sih_read_isr(sih);
+	local_irq_disable();
+
+	if (isr < 0) {
+		pr_err("twl4030: %s SIH, read ISR error %d\n",
+			sih->name, isr);
+		/* REVISIT:  recover; eventually mask it all, etc */
+		return;
+	}
+
+	while (isr) {
+		irq = fls(isr);
+		irq--;
+		isr &= ~BIT(irq);
+
+		if (irq < sih->bits)
+			generic_handle_irq(agent->irq_base + irq);
+		else
+			pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
+				sih->name, irq);
+	}
+}
+
+static unsigned twl4030_irq_next;
+
+/* returns the first IRQ used by this SIH bank,
+ * or negative errno
+ */
+int twl4030_sih_setup(int module)
+{
+	int			sih_mod;
+	const struct sih	*sih = NULL;
+	struct sih_agent	*agent;
+	int			i, irq;
+	int			status = -EINVAL;
+	unsigned		irq_base = twl4030_irq_next;
+
+	/* only support modules with standard clear-on-read for now */
+	for (sih_mod = 0, sih = sih_modules;
+			sih_mod < ARRAY_SIZE(sih_modules);
+			sih_mod++, sih++) {
+		if (sih->module == module && sih->set_cor) {
+			if (!WARN((irq_base + sih->bits) > NR_IRQS,
+					"irq %d for %s too big\n",
+					irq_base + sih->bits,
+					sih->name))
+				status = 0;
+			break;
+		}
+	}
+	if (status < 0)
+		return status;
+
+	agent = kzalloc(sizeof *agent, GFP_KERNEL);
+	if (!agent)
+		return -ENOMEM;
+
+	status = 0;
+
+	agent->irq_base = irq_base;
+	agent->sih = sih;
+	agent->imr = ~0;
+	INIT_WORK(&agent->mask_work, twl4030_sih_do_mask);
+	INIT_WORK(&agent->edge_work, twl4030_sih_do_edge);
+
+	for (i = 0; i < sih->bits; i++) {
+		irq = irq_base + i;
+
+		set_irq_chip_and_handler(irq, &twl4030_sih_irq_chip,
+				handle_edge_irq);
+		set_irq_chip_data(irq, agent);
+		activate_irq(irq);
+	}
+
+	status = irq_base;
+	twl4030_irq_next += i;
+
+	/* replace generic PIH handler (handle_simple_irq) */
+	irq = sih_mod + twl4030_irq_base;
+	set_irq_data(irq, agent);
+	set_irq_chained_handler(irq, handle_twl4030_sih);
+
+	pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name,
+			irq, irq_base, twl4030_irq_next - 1);
+
+	return status;
+}
+
+/* FIXME need a call to reverse twl4030_sih_setup() ... */
+
+
+/*----------------------------------------------------------------------*/
+
+/* FIXME pass in which interrupt line we'll use ... */
+#define twl_irq_line	0
+
+int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+{
+	static struct irq_chip	twl4030_irq_chip;
+
+	int			status;
+	int			i;
+	struct task_struct	*task;
+
+	/*
+	 * Mask and clear all TWL4030 interrupts since initially we do
+	 * not have any TWL4030 module interrupt handlers present
+	 */
+	status = twl4030_init_sih_modules(twl_irq_line);
+	if (status < 0)
+		return status;
+
+	wq = create_singlethread_workqueue("twl4030-irqchip");
+	if (!wq) {
+		pr_err("twl4030: workqueue FAIL\n");
+		return -ESRCH;
+	}
+
+	twl4030_irq_base = irq_base;
+
+	/* install an irq handler for each of the SIH modules;
+	 * clone dummy irq_chip since PIH can't *do* anything
+	 */
+	twl4030_irq_chip = dummy_irq_chip;
+	twl4030_irq_chip.name = "twl4030";
+
+	twl4030_sih_irq_chip.ack = dummy_irq_chip.ack;
+
+	for (i = irq_base; i < irq_end; i++) {
+		set_irq_chip_and_handler(i, &twl4030_irq_chip,
+				handle_simple_irq);
+		activate_irq(i);
+	}
+	twl4030_irq_next = i;
+	pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
+			irq_num, irq_base, twl4030_irq_next - 1);
+
+	/* ... and the PWR_INT module ... */
+	status = twl4030_sih_setup(TWL4030_MODULE_INT);
+	if (status < 0) {
+		pr_err("twl4030: sih_setup PWR INT --> %d\n", status);
+		goto fail;
+	}
+
+	/* install an irq handler to demultiplex the TWL4030 interrupt */
+	task = start_twl4030_irq_thread(irq_num);
+	if (!task) {
+		pr_err("twl4030: irq thread FAIL\n");
+		status = -ESRCH;
+		goto fail;
+	}
+
+	set_irq_data(irq_num, task);
+	set_irq_chained_handler(irq_num, handle_twl4030_pih);
+
+	return status;
+
+fail:
+	for (i = irq_base; i < irq_end; i++)
+		set_irq_chip_and_handler(i, NULL, NULL);
+	destroy_workqueue(wq);
+	wq = NULL;
+	return status;
+}
+
+int twl_exit_irq(void)
+{
+	/* FIXME undo twl_init_irq() */
+	if (twl4030_irq_base) {
+		pr_err("twl4030: can't yet clean up IRQs?\n");
+		return -ENOSYS;
+	}
+	return 0;
+}