summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci-s3c.c
diff options
context:
space:
mode:
authorMarek Szyprowski <m.szyprowski@samsung.com>2010-08-10 18:01:56 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-08-11 08:59:05 -0700
commitce5f036bbbfc6c21d7b55b8fdaa2e2bd56392d94 (patch)
tree9567c61e6df52664b86c0d0da9f0cdb5a52de4b6 /drivers/mmc/host/sdhci-s3c.c
parent3fe42e077f65351503f5004031549db330bb105e (diff)
downloadlinux-ce5f036bbbfc6c21d7b55b8fdaa2e2bd56392d94.tar.gz
linux-ce5f036bbbfc6c21d7b55b8fdaa2e2bd56392d94.tar.bz2
linux-ce5f036bbbfc6c21d7b55b8fdaa2e2bd56392d94.zip
sdhci-s3c: add support for the non standard minimal clock value
S3C SDHCI host controller can change the source for generating mmc clock. By default host bus clock is used, what causes some problems on machines with 133MHz bus, because the SDHCI divider cannot be as high get proper clock value for identification mode. This is not a problem for the controller, because it can generate lower frequencies from other clock sources. This patch changes sdhci driver to use get_min_clock() call if it has been provided. This fixes the flood of the following warnings on Samsung S5PV210 SoCs: mmc0: Minimum clock frequency too high for identification mode Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/mmc/host/sdhci-s3c.c')
-rw-r--r--drivers/mmc/host/sdhci-s3c.c27
1 files changed, 27 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index d7058eee95f9..47138afea2b5 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -203,9 +203,36 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
}
}
+/**
+ * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
+ * @host: The SDHCI host being queried
+ *
+ * To init mmc host properly a minimal clock value is needed. For high system
+ * bus clock's values the standard formula gives values out of allowed range.
+ * The clock still can be set to lower values, if clock source other then
+ * system bus is selected.
+*/
+static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned int delta, min = UINT_MAX;
+ int src;
+
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ delta = sdhci_s3c_consider_clock(ourhost, src, 0);
+ if (delta == UINT_MAX)
+ continue;
+ /* delta is a negative value in this case */
+ if (-delta < min)
+ min = -delta;
+ }
+ return min;
+}
+
static struct sdhci_ops sdhci_s3c_ops = {
.get_max_clock = sdhci_s3c_get_max_clk,
.set_clock = sdhci_s3c_set_clock,
+ .get_min_clock = sdhci_s3c_get_min_clock,
};
static int __devinit sdhci_s3c_probe(struct platform_device *pdev)