summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@bootlin.com>2018-10-19 09:49:07 +0200
committerBoris Brezillon <boris.brezillon@bootlin.com>2018-11-05 22:24:43 +0100
commitba32ce95cbd9876eb7f5ec39af87829c8f13a337 (patch)
treeb6c2a959057771e1fb774f9537da2d71dc47529a /drivers/mtd/maps
parent3edf4b9f381efdb09299a5f928d4f35609d5f530 (diff)
downloadlinux-ba32ce95cbd9876eb7f5ec39af87829c8f13a337.tar.gz
linux-ba32ce95cbd9876eb7f5ec39af87829c8f13a337.tar.bz2
linux-ba32ce95cbd9876eb7f5ec39af87829c8f13a337.zip
mtd: maps: Merge gpio-addr-flash.c into physmap-core.c
Controlling some MSB address lines using GPIOs is just a small deviation from the generic physmap logic, and merging those two drivers allows us to share most of the probe logic, which is a good thing. Also, the gpio-addr-flash driver is unused since the removal of the blackfin arch in v4.17, so we can safely remove the old driver without risking breaking existing boards. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/mtd/maps')
-rw-r--r--drivers/mtd/maps/Kconfig19
-rw-r--r--drivers/mtd/maps/Makefile1
-rw-r--r--drivers/mtd/maps/gpio-addr-flash.c281
-rw-r--r--drivers/mtd/maps/physmap-core.c150
4 files changed, 157 insertions, 294 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index bb0d64e3fcd6..93b7ae32e277 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -94,6 +94,15 @@ config MTD_PHYSMAP_GEMINI
platforms, some detection and setting up parallel mode on the
external interface.
+config MTD_PHYSMAP_GPIO_ADDR
+ bool "GPIO-assisted Flash Chip Support"
+ depends on MTD_PHYSMAP
+ depends on GPIOLIB || COMPILE_TEST
+ depends on MTD_COMPLEX_MAPPINGS
+ help
+ Extend the physmap driver to allow flashes to be partially
+ physically addressed and assisted by GPIOs.
+
config MTD_PMC_MSP_EVM
tristate "CFI Flash device mapped on PMC-Sierra MSP"
depends on PMC_MSP && MTD_CFI
@@ -334,16 +343,6 @@ config MTD_PCMCIA_ANONYMOUS
If unsure, say N.
-config MTD_GPIO_ADDR
- tristate "GPIO-assisted Flash Chip Support"
- depends on GPIOLIB || COMPILE_TEST
- depends on MTD_COMPLEX_MAPPINGS
- help
- Map driver which allows flashes to be partially physically addressed
- and assisted by GPIOs.
-
- If compiled as a module, it will be called gpio-addr-flash.
-
config MTD_UCLINUX
bool "Generic uClinux RAM/ROM filesystem support"
depends on (MTD_RAM=y || MTD_ROM=y) && (!MMU || COLDFIRE)
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index ce737e15b7cf..ed1ef75244db 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -43,6 +43,5 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
obj-$(CONFIG_MTD_VMU) += vmu-flash.o
-obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
deleted file mode 100644
index a20e85aa770e..000000000000
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * drivers/mtd/maps/gpio-addr-flash.c
- *
- * Handle the case where a flash device is mostly addressed using physical
- * line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
- * to a 2MiB memory range and use the GPIOs to select a particular range.
- *
- * Copyright © 2000 Nicolas Pitre <nico@cam.org>
- * Copyright © 2005-2009 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#define win_mask(x) ((BIT(x)) - 1)
-
-#define DRIVER_NAME "gpio-addr-flash"
-
-/**
- * struct async_state - keep GPIO flash state
- * @mtd: MTD state for this mapping
- * @map: MTD map state for this flash
- * @gpios: Struct containing the array of GPIO descriptors
- * @gpio_values: cached GPIO values
- * @win_order: dedicated memory size (if no GPIOs)
- */
-struct async_state {
- struct mtd_info *mtd;
- struct map_info map;
- struct gpio_descs *gpios;
- unsigned int gpio_values;
- unsigned int win_order;
-};
-#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
-
-/**
- * gf_set_gpios() - set GPIO address lines to access specified flash offset
- * @state: GPIO flash state
- * @ofs: desired offset to access
- *
- * Rather than call the GPIO framework every time, cache the last-programmed
- * value. This speeds up sequential accesses (which are by far the most common
- * type).
- */
-static void gf_set_gpios(struct async_state *state, unsigned long ofs)
-{
- int i;
-
- ofs >>= state->win_order;
-
- if (ofs == state->gpio_values)
- return;
-
- for (i = 0; i < state->gpios->ndescs; i++) {
- if ((ofs & BIT(i)) == (state->gpio_values & BIT(i)))
- continue;
-
- gpiod_set_value(state->gpios->desc[i], !!(ofs & BIT(i)));
- }
-
- state->gpio_values = ofs;
-}
-
-/**
- * gf_read() - read a word at the specified offset
- * @map: MTD map state
- * @ofs: desired offset to read
- */
-static map_word gf_read(struct map_info *map, unsigned long ofs)
-{
- struct async_state *state = gf_map_info_to_state(map);
- uint16_t word;
- map_word test;
-
- gf_set_gpios(state, ofs);
-
- word = readw(map->virt + (ofs & win_mask(state->win_order)));
- test.x[0] = word;
- return test;
-}
-
-/**
- * gf_copy_from() - copy a chunk of data from the flash
- * @map: MTD map state
- * @to: memory to copy to
- * @from: flash offset to copy from
- * @len: how much to copy
- *
- * The "from" region may straddle more than one window, so toggle the GPIOs for
- * each window region before reading its data.
- */
-static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
- struct async_state *state = gf_map_info_to_state(map);
-
- int this_len;
-
- while (len) {
- this_len = from & win_mask(state->win_order);
- this_len = BIT(state->win_order) - this_len;
- this_len = min_t(int, len, this_len);
-
- gf_set_gpios(state, from);
- memcpy_fromio(to,
- map->virt + (from & win_mask(state->win_order)),
- this_len);
- len -= this_len;
- from += this_len;
- to += this_len;
- }
-}
-
-/**
- * gf_write() - write a word at the specified offset
- * @map: MTD map state
- * @ofs: desired offset to write
- */
-static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
-{
- struct async_state *state = gf_map_info_to_state(map);
- uint16_t d;
-
- gf_set_gpios(state, ofs);
-
- d = d1.x[0];
- writew(d, map->virt + (ofs & win_mask(state->win_order)));
-}
-
-/**
- * gf_copy_to() - copy a chunk of data to the flash
- * @map: MTD map state
- * @to: flash offset to copy to
- * @from: memory to copy from
- * @len: how much to copy
- *
- * See gf_copy_from() caveat.
- */
-static void gf_copy_to(struct map_info *map, unsigned long to,
- const void *from, ssize_t len)
-{
- struct async_state *state = gf_map_info_to_state(map);
-
- int this_len;
-
- while (len) {
- this_len = to & win_mask(state->win_order);
- this_len = BIT(state->win_order) - this_len;
- this_len = min_t(int, len, this_len);
-
- gf_set_gpios(state, to);
- memcpy_toio(map->virt + (to & win_mask(state->win_order)),
- from, len);
-
- len -= this_len;
- to += this_len;
- from += this_len;
- }
-}
-
-static const char * const part_probe_types[] = {
- "cmdlinepart", "RedBoot", NULL };
-
-/**
- * gpio_flash_probe() - setup a mapping for a GPIO assisted flash
- * @pdev: platform device
- *
- * The platform resource layout expected looks something like:
- * struct mtd_partition partitions[] = { ... };
- * struct physmap_flash_data flash_data = { ... };
- * static struct gpiod_lookup_table addr_flash_gpios = {
- * .dev_id = "gpio-addr-flash.0",
- * .table = {
- * GPIO_LOOKUP_IDX("gpio.0", 15, "addr", 0, GPIO_ACTIVE_HIGH),
- * GPIO_LOOKUP_IDX("gpio.0", 16, "addr", 1, GPIO_ACTIVE_HIGH),
- * );
- * };
- * gpiod_add_lookup_table(&addr_flash_gpios);
- *
- * struct resource flash_resource[] = {
- * {
- * .name = "cfi_probe",
- * .start = 0x20000000,
- * .end = 0x201fffff,
- * .flags = IORESOURCE_MEM,
- * },
- * };
- * struct platform_device flash_device = {
- * .name = "gpio-addr-flash",
- * .dev = { .platform_data = &flash_data, },
- * .num_resources = ARRAY_SIZE(flash_resource),
- * .resource = flash_resource,
- * ...
- * };
- */
-static int gpio_flash_probe(struct platform_device *pdev)
-{
- struct physmap_flash_data *pdata;
- struct resource *memory;
- struct async_state *state;
-
- pdata = dev_get_platdata(&pdev->dev);
- memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- if (!memory)
- return -EINVAL;
-
- state = devm_kzalloc(&pdev->dev, sizeof(*state), GFP_KERNEL);
- if (!state)
- return -ENOMEM;
-
- state->gpios = devm_gpiod_get_array(&pdev->dev, "addr", GPIOD_OUT_LOW);
- if (IS_ERR(state->gpios))
- return PTR_ERR(state->gpios);
-
- state->win_order = get_bitmask_order(resource_size(memory)) - 1;
-
- state->map.name = DRIVER_NAME;
- state->map.read = gf_read;
- state->map.copy_from = gf_copy_from;
- state->map.write = gf_write;
- state->map.copy_to = gf_copy_to;
- state->map.bankwidth = pdata->width;
- state->map.size = BIT(state->win_order + state->gpios->ndescs);
- state->map.virt = devm_ioremap_resource(&pdev->dev, memory);
- if (IS_ERR(state->map.virt))
- return PTR_ERR(state->map.virt);
-
- state->map.phys = NO_XIP;
- state->map.map_priv_1 = (unsigned long)state;
-
- platform_set_drvdata(pdev, state);
-
- dev_notice(&pdev->dev, "probing %d-bit flash bus\n",
- state->map.bankwidth * 8);
- state->mtd = do_map_probe(memory->name, &state->map);
- if (!state->mtd)
- return -ENXIO;
- state->mtd->dev.parent = &pdev->dev;
-
- mtd_device_parse_register(state->mtd, part_probe_types, NULL,
- pdata->parts, pdata->nr_parts);
-
- return 0;
-}
-
-static int gpio_flash_remove(struct platform_device *pdev)
-{
- struct async_state *state = platform_get_drvdata(pdev);
-
- mtd_device_unregister(state->mtd);
- map_destroy(state->mtd);
- return 0;
-}
-
-static struct platform_driver gpio_flash_driver = {
- .probe = gpio_flash_probe,
- .remove = gpio_flash_remove,
- .driver = {
- .name = DRIVER_NAME,
- },
-};
-
-module_platform_driver(gpio_flash_driver);
-
-MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
-MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index 8a8af37576ff..11e6239aadc7 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -13,6 +13,14 @@
*
* Revised to handle newer style flash binding by:
* Copyright (C) 2007 David Gibson, IBM Corporation.
+ *
+ * GPIO address extension:
+ * Handle the case where a flash device is mostly addressed using physical
+ * line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
+ * to a 2MiB memory range and use the GPIOs to select a particular range.
+ *
+ * Copyright © 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright © 2005-2009 Analog Devices Inc.
*/
#include <linux/module.h>
@@ -30,6 +38,7 @@
#include <linux/mtd/cfi_endian.h>
#include <linux/io.h>
#include <linux/of_device.h>
+#include <linux/gpio/consumer.h>
#include "physmap-gemini.h"
#include "physmap-versatile.h"
@@ -45,6 +54,9 @@ struct physmap_flash_info {
const char * const *part_types;
unsigned int nparts;
const struct mtd_partition *parts;
+ struct gpio_descs *gpios;
+ unsigned int gpio_values;
+ unsigned int win_order;
};
static int physmap_flash_remove(struct platform_device *dev)
@@ -104,6 +116,119 @@ static void physmap_set_vpp(struct map_info *map, int state)
spin_unlock_irqrestore(&info->vpp_lock, flags);
}
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP_GPIO_ADDR)
+static void physmap_set_addr_gpios(struct physmap_flash_info *info,
+ unsigned long ofs)
+{
+ unsigned int i;
+
+ ofs >>= info->win_order;
+ if (info->gpio_values == ofs)
+ return;
+
+ for (i = 0; i < info->gpios->ndescs; i++) {
+ if ((BIT(i) & ofs) == (BIT(i) & info->gpio_values))
+ continue;
+
+ gpiod_set_value(info->gpios->desc[i], !!(BIT(i) & ofs));
+ }
+}
+
+#define win_mask(order) (BIT(order) - 1)
+
+static map_word physmap_addr_gpios_read(struct map_info *map,
+ unsigned long ofs)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_info *info;
+ map_word mw;
+ u16 word;
+
+ pdev = (struct platform_device *)map->map_priv_1;
+ info = platform_get_drvdata(pdev);
+ physmap_set_addr_gpios(info, ofs);
+
+ word = readw(map->virt + (ofs & win_mask(info->win_order)));
+ mw.x[0] = word;
+ return mw;
+}
+
+static void physmap_addr_gpios_copy_from(struct map_info *map, void *buf,
+ unsigned long ofs, ssize_t len)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_info *info;
+
+ pdev = (struct platform_device *)map->map_priv_1;
+ info = platform_get_drvdata(pdev);
+
+ while (len) {
+ unsigned int winofs = ofs & win_mask(info->win_order);
+ unsigned int chunklen = min_t(unsigned int, len,
+ BIT(info->win_order) - winofs);
+
+ physmap_set_addr_gpios(info, ofs);
+ memcpy_fromio(buf, map->virt + winofs, chunklen);
+ len -= chunklen;
+ buf += chunklen;
+ ofs += chunklen;
+ }
+}
+
+static void physmap_addr_gpios_write(struct map_info *map, map_word mw,
+ unsigned long ofs)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_info *info;
+ u16 word;
+
+ pdev = (struct platform_device *)map->map_priv_1;
+ info = platform_get_drvdata(pdev);
+ physmap_set_addr_gpios(info, ofs);
+
+ word = mw.x[0];
+ writew(word, map->virt + (ofs & win_mask(info->win_order)));
+}
+
+static void physmap_addr_gpios_copy_to(struct map_info *map, unsigned long ofs,
+ const void *buf, ssize_t len)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_info *info;
+
+ pdev = (struct platform_device *)map->map_priv_1;
+ info = platform_get_drvdata(pdev);
+
+ while (len) {
+ unsigned int winofs = ofs & win_mask(info->win_order);
+ unsigned int chunklen = min_t(unsigned int, len,
+ BIT(info->win_order) - winofs);
+
+ physmap_set_addr_gpios(info, ofs);
+ memcpy_toio(map->virt + winofs, buf, chunklen);
+ len -= chunklen;
+ buf += chunklen;
+ ofs += chunklen;
+ }
+}
+
+static int physmap_addr_gpios_map_init(struct map_info *map)
+{
+ map->phys = NO_XIP;
+ map->read = physmap_addr_gpios_read;
+ map->copy_from = physmap_addr_gpios_copy_from;
+ map->write = physmap_addr_gpios_write;
+ map->copy_to = physmap_addr_gpios_copy_to;
+
+ return 0;
+}
+#else
+static int physmap_addr_gpios_map_init(struct map_info *map)
+{
+ return -ENOTSUPP;
+}
+#endif
+
#if IS_ENABLED(CONFIG_MTD_PHYSMAP_OF)
static const struct of_device_id of_flash_match[] = {
{
@@ -343,6 +468,16 @@ static int physmap_flash_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
+ info->gpios = devm_gpiod_get_array_optional(&dev->dev, "addr",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(info->gpios))
+ return PTR_ERR(info->gpios);
+
+ if (info->gpios && info->nmaps > 1) {
+ dev_err(&dev->dev, "addr-gpios only supported for nmaps == 1\n");
+ return -EINVAL;
+ }
+
if (dev->dev.of_node)
err = physmap_flash_of_init(dev);
else
@@ -369,10 +504,20 @@ static int physmap_flash_probe(struct platform_device *dev)
if (!info->maps[i].phys)
info->maps[i].phys = res->start;
- info->maps[i].size = resource_size(res);
+ info->win_order = get_bitmask_order(resource_size(res)) - 1;
+ info->maps[i].size = BIT(info->win_order +
+ (info->gpios ?
+ info->gpios->ndescs : 0));
+
info->maps[i].map_priv_1 = (unsigned long)dev;
- simple_map_init(&info->maps[i]);
+ if (info->gpios) {
+ err = physmap_addr_gpios_map_init(&info->maps[i]);
+ if (err)
+ goto err_out;
+ } else {
+ simple_map_init(&info->maps[i]);
+ }
probe_type = rom_probe_types;
if (!info->probe_type) {
@@ -497,6 +642,7 @@ module_exit(physmap_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_AUTHOR("Vitaly Wool <vwool@ru.mvista.com>");
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
MODULE_DESCRIPTION("Generic configurable MTD map driver");
/* legacy platform drivers can't hotplug or coldplg */