amd: Move AMD (Lance) chipset drivers

Moves the drivers for the AMD chipsets into drivers/net/ethernet/amd/
and the necessary Kconfig and Makfile changes.

The au1000 (Alchemy) driver was also moved into the same directory
even though it is not a "Lance" driver.

CC: Peter Maydell <pmaydell@chiark.greenend.org.uk>
CC: Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
CC: "Maciej W. Rozycki" <macro@linux-mips.org>
CC: Donald Becker <becker@scyld.com>
CC: Sam Creasey <sammy@users.qual.net>
CC: Miguel de Icaza <miguel@nuclecu.unam.mx>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: Don Fry <pcnet32@frontier.com>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: David Davies <davies@maniac.ultranet.com>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Pete Popov <ppopov@embeddedalley.com>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: "Roger C. Pao" <rpao@paonet.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 153 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0b3ea213b610..b686dab54ec6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -287,27 +287,6 @@ config BMAC
 	  To compile this driver as a module, choose M here: the module
 	  will be called bmac.
 
-config ARIADNE
-	tristate "Ariadne support"
-	depends on ZORRO
-	help
-	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
-	  Otherwise, say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ariadne.
-
-config A2065
-	tristate "A2065 support"
-	depends on ZORRO
-	select CRC32
-	help
-	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
-	  say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called a2065.
-
 config HYDRA
 	tristate "Hydra support"
 	depends on ZORRO
@@ -387,16 +366,6 @@ config MACMACE
 	  say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-config MVME147_NET
-	tristate "MVME147 (Lance) Ethernet support"
-	depends on MVME147
-	select CRC32
-	help
-	  Support for the on-board Ethernet interface on the Motorola MVME147
-	  single-board computer.  Say Y here to include the
-	  driver for this chip in your kernel.
-	  To compile this driver as a module, choose M here.
-
 config MVME16x_NET
 	tristate "MVME16x Ethernet support"
 	depends on MVME16x
@@ -415,27 +384,6 @@ config BVME6000_NET
 	  in your kernel.
 	  To compile this driver as a module, choose M here.
 
-config ATARILANCE
-	tristate "Atari Lance support"
-	depends on ATARI
-	help
-	  Say Y to include support for several Atari Ethernet adapters based
-	  on the AMD Lance chipset: RieblCard (with or without battery), or
-	  PAMCard VME (also the version by Rhotron, with different addresses).
-
-config SUN3LANCE
-	tristate "Sun3/Sun3x on-board LANCE support"
-	depends on SUN3 || SUN3X
-	help
-	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
-	  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
-	  here to compile in the Linux driver for this and enable Ethernet.
-	  General Linux information on the Sun 3 and 3x series (now
-	  discontinued) is at
-	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-	  If you're not building a kernel for a Sun 3, say N.
-
 config SUN3_82586
 	bool "Sun3 on-board Intel 82586 support"
 	depends on SUN3
@@ -445,14 +393,6 @@ config SUN3_82586
 	  that this driver does not support 82586-based adapters on additional
 	  VME boards.
 
-config HPLANCE
-	bool "HP on-board LANCE support"
-	depends on DIO
-	select CRC32
-	help
-	  If you want to use the builtin "LANCE" Ethernet controller on an
-	  HP300 machine, say Y here.
-
 config LASI_82596
 	tristate "Lasi ethernet"
 	depends on GSC
@@ -487,15 +427,6 @@ config XTENSA_XT2000_SONIC
 	help
 	  This is the driver for the onboard card of the Xtensa XT2000 board.
 
-config MIPS_AU1X00_ENET
-	tristate "MIPS AU1000 Ethernet support"
-	depends on MIPS_ALCHEMY
-	select PHYLIB
-	select CRC32
-	help
-	  If you have an Alchemy Semi AU1X00 based system
-	  say Y.  Otherwise, say N.
-
 config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
 	depends on PCI && SGI_IP27
@@ -545,19 +476,6 @@ config SH_ETH
 	  This driver supporting CPUs are:
 		- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
 
-config SUNLANCE
-	tristate "Sun LANCE support"
-	depends on SBUS
-	select CRC32
-	help
-	  This driver supports the "le" interface present on all 32-bit Sparc
-	  systems, on some older Ultra systems and as an Sbus option.  These
-	  cards are based on the AMD Lance chipset, which is better known
-	  via the NE2100 cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunlance.
-
 config HAPPYMEAL
 	tristate "Sun Happy Meal 10/100baseT support"
 	depends on SBUS || PCI
@@ -673,18 +591,6 @@ config ELMC_II
 	  To compile this driver as a module, choose M here. The module
 	  will be called 3c527.
 
-config LANCE
-	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
-	depends on ISA && ISA_DMA_API
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
-	  of this type.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called lance.  This is recommended.
-
 config NET_VENDOR_SMC
 	bool "Western Digital/SMC cards"
 	depends on ISA || MCA || EISA || MAC
@@ -1020,17 +926,6 @@ config NI52
 	  To compile this driver as a module, choose M here. The module
 	  will be called ni52.
 
-config NI65
-	tristate "NI6510 support"
-	depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni65.
-
 config DNET
 	tristate "Dave ethernet support (DNET)"
 	depends on NET_ETHERNET && HAS_IOMEM
@@ -1056,19 +951,6 @@ config AT1700
 	  To compile this driver as a module, choose M here. The module
 	  will be called at1700.
 
-config DEPCA
-	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
-	depends on ISA || EISA || MCA
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto> as well as
-	  <file:drivers/net/depca.c>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called depca.
-
 config HP100
 	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
 	depends on ISA || EISA || PCI
@@ -1287,32 +1169,6 @@ config NET_PCI
 	  will be asked for your specific card in the following questions. If
 	  you are unsure, say Y.
 
-config PCNET32
-	tristate "AMD PCnet32 PCI support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called pcnet32.
-
-config AMD8111_ETH
-	tristate "AMD 8111 (new PCI lance) support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have an AMD 8111-based PCI lance ethernet card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called amd8111e.
-
 config ADAPTEC_STARFIRE
 	tristate "Adaptec Starfire/DuraLAN support"
 	depends on NET_PCI && PCI
@@ -1834,15 +1690,6 @@ config SGISEEQ
 	  Say Y here if you have an Seeq based Ethernet network card. This is
 	  used in many Silicon Graphics machines.
 
-config DECLANCE
-	tristate "DEC LANCE ethernet controller support"
-	depends on MACH_DECSTATION
-	select CRC32
-	help
-	  This driver is for the series of Ethernet controllers produced by
-	  DEC (now Compaq) based on the AMD Lance chipset, including the
-	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
-
 config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \