Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 183 insertions, 0 deletions

diff --git a/drivers/net/dgrs_es4h.h b/drivers/net/dgrs_es4h.h
new file mode 100644
index 000000000000..5518fba46b2c
--- /dev/null
+++ b/drivers/net/dgrs_es4h.h
@@ -0,0 +1,183 @@
+/************************************************************************/
+/*									*/
+/*	es4h.h:	Hardware definition of the ES/4h Ethernet Switch, from	*/
+/*		both the host and the 3051's point of view.		*/
+/*		NOTE: this name is a misnomer now that there is a PCI	*/
+/*		board.  Everything that says "es4h" should really be	*/
+/*		"se4".  But we'll keep the old name for now.		*/
+/*									*/
+/*	$Id: es4h.h,v 1.10 1996/08/22 17:16:53 rick Exp $		*/
+/*									*/
+/************************************************************************/
+
+/************************************************************************/
+/*									*/
+/*	EISA I/O Registers.  These are located at 0x1000 * slot-number	*/
+/*	plus the indicated address.  I.E. 0x4000-0x4009 for slot 4.	*/
+/*									*/
+/************************************************************************/
+
+#define	ES4H_MANUFmsb	0x00		/* Read-only */
+#define	ES4H_MANUFlsb	0x01		/* Read-only */
+#	define ES4H_MANUF_CODE		0x1049	/* = "DBI" */
+
+#define	ES4H_PRODUCT	0x02		/* Read-only */
+#	define ES4H_PRODUCT_CODE	0x0A
+#	define EPC_PRODUCT_CODE		0x03
+
+#define	ES4H_REVISION	0x03		/* Read-only */
+#	define ES4H_REVISION_CODE	0x01
+
+#define	ES4H_EC		0x04		/* EISA Control */
+#	define ES4H_EC_RESET		0x04	/* WO, EISA reset */
+#	define ES4H_EC_ENABLE		0x01	/* RW, EISA enable - set to */
+						/* 1 before memory enable */
+#define	ES4H_PC		0x05		/* Processor Control */
+#	define ES4H_PC_RESET		0x04	/* RW, 3051 reset */
+#	define ES4H_PC_INT		0x08	/* WO, assert 3051 intr. 3 */
+
+#define	ES4H_MW		0x06		/* Memory Window select and enable */
+#	define ES4H_MW_ENABLE		0x80	/* WO, enable memory */
+#	define ES4H_MW_SELECT_MASK	0x1f	/* WO, 32k window selected */
+
+#define	ES4H_IS		0x07		/* Interrupt, addr select */
+#	define ES4H_IS_INTMASK		0x07	/* WO, interrupt select */
+#	define ES4H_IS_INTOFF		0x00		/* No IRQ */
+#	define ES4H_IS_INT3		0x03		/* IRQ 3 */
+#	define ES4H_IS_INT5		0x02		/* IRQ 5 */
+#	define ES4H_IS_INT7		0x01		/* IRQ 7 */
+#	define ES4H_IS_INT10		0x04		/* IRQ 10 */
+#	define ES4H_IS_INT11		0x05		/* IRQ 11 */
+#	define ES4H_IS_INT12		0x06		/* IRQ 12 */
+#	define ES4H_IS_INT15		0x07		/* IRQ 15 */
+#	define ES4H_IS_INTACK		0x10	/* WO, interrupt ack */
+#	define ES4H_IS_INTPEND		0x10	/* RO, interrupt pending */
+#	define ES4H_IS_LINEAR		0x40	/* WO, no memory windowing */
+#	define ES4H_IS_AS15		0x80	/* RW, address select bit 15 */
+
+#define	ES4H_AS_23_16	0x08		/* Address select bits 23-16 */
+#define	ES4H_AS_31_24	0x09		/* Address select bits 31-24 */
+
+#define ES4H_IO_MAX		0x09		/* Size of I/O space */
+
+/*
+ * PCI
+ */
+#define SE6_RESET		PLX_USEROUT
+
+/************************************************************************/
+/*									*/
+/*	3051 Memory Map							*/
+/*									*/
+/*	Note: 3051 has 4K I-cache, 2K D-cache.  1 cycle is 50 nsec.	*/
+/*									*/
+/************************************************************************/
+#define	SE4_NPORTS		4		/* # of ethernet ports */
+#define	SE6_NPORTS		6		/* # of ethernet ports */
+#define	SE_NPORTS		6		/* Max # of ethernet ports */
+
+#define	ES4H_RAM_BASE		0x83000000	/* Base address of RAM */
+#define	ES4H_RAM_SIZE		0x00200000	/* Size of RAM (2MB) */
+#define	ES4H_RAM_INTBASE	0x83800000	/* Base of int-on-write RAM */
+						/* a.k.a. PKT RAM */
+
+						/* Ethernet controllers */
+						/* See: i82596.h */
+#define	ES4H_ETHER0_PORT	0xA2000000
+#define	ES4H_ETHER0_CMD		0xA2000100
+#define	ES4H_ETHER1_PORT	0xA2000200
+#define	ES4H_ETHER1_CMD		0xA2000300
+#define	ES4H_ETHER2_PORT	0xA2000400
+#define	ES4H_ETHER2_CMD		0xA2000500
+#define	ES4H_ETHER3_PORT	0xA2000600
+#define	ES4H_ETHER3_CMD		0xA2000700
+#define	ES4H_ETHER4_PORT	0xA2000800	/* RS SE-6 only */
+#define	ES4H_ETHER4_CMD		0xA2000900	/* RS SE-6 only */
+#define	ES4H_ETHER5_PORT	0xA2000A00	/* RS SE-6 only */
+#define	ES4H_ETHER5_CMD		0xA2000B00	/* RS SE-6 only */
+
+#define	ES4H_I8254		0xA2040000	/* 82C54 timers */
+						/* See: i8254.h */
+
+#define	SE4_I8254_HZ		(23000000/4)	/* EISA clock input freq. */
+#define	SE4_IDT_HZ		(46000000)	/* EISA CPU freq. */
+#define	SE6_I8254_HZ		(20000000/4)	/* PCI clock input freq. */
+#define	SE6_IDT_HZ		(50000000)	/* PCI CPU freq. */
+#define	ES4H_I8254_HZ		(23000000/4)	/* EISA clock input freq. */
+
+#define	ES4H_GPP		0xA2050000	/* General purpose port */
+	/*
+	 * SE-4 (EISA) GPP bits
+	 */
+#	define ES4H_GPP_C0_100		0x0001	/* WO, Chan 0: 100 ohm TP */
+#	define ES4H_GPP_C0_SQE		0x0002	/* WO, Chan 0: normal squelch */
+#	define ES4H_GPP_C1_100		0x0004	/* WO, Chan 1: 100 ohm TP */
+#	define ES4H_GPP_C1_SQE		0x0008	/* WO, Chan 1: normal squelch */
+#	define ES4H_GPP_C2_100		0x0010	/* WO, Chan 2: 100 ohm TP */
+#	define ES4H_GPP_C2_SQE		0x0020	/* WO, Chan 2: normal squelch */
+#	define ES4H_GPP_C3_100		0x0040	/* WO, Chan 3: 100 ohm TP */
+#	define ES4H_GPP_C3_SQE		0x0080	/* WO, Chan 3: normal squelch */
+#	define ES4H_GPP_SQE		0x00AA	/* WO, All: normal squelch */
+#	define ES4H_GPP_100		0x0055	/* WO, All: 100 ohm TP */
+#	define ES4H_GPP_HOSTINT		0x0100	/* RO, cause intr. to host */
+						/* Hold high > 250 nsec */
+#	define SE4_GPP_EED		0x0200	/* RW, EEPROM data bit */
+#	define SE4_GPP_EECS		0x0400	/* RW, EEPROM chip select */
+#	define SE4_GPP_EECK		0x0800	/* RW, EEPROM clock */
+
+	/*
+	 * SE-6 (PCI) GPP bits
+	 */
+#	define SE6_GPP_EED		0x0001	/* RW, EEPROM data bit */
+#	define SE6_GPP_EECS		0x0002	/* RW, EEPROM chip select */
+#	define SE6_GPP_EECK		0x0004	/* RW, EEPROM clock */
+#	define SE6_GPP_LINK		0x00fc	/* R, Link status LEDs */
+
+#define	ES4H_INTVEC		0xA2060000	/* RO: Interrupt Vector */
+#	define ES4H_IV_DMA0		0x01	/* Chan 0 DMA interrupt */
+#	define ES4H_IV_PKT0		0x02	/* Chan 0 PKT interrupt */
+#	define ES4H_IV_DMA1		0x04	/* Chan 1 DMA interrupt */
+#	define ES4H_IV_PKT1		0x08	/* Chan 1 PKT interrupt */
+#	define ES4H_IV_DMA2		0x10	/* Chan 2 DMA interrupt */
+#	define ES4H_IV_PKT2		0x20	/* Chan 2 PKT interrupt */
+#	define ES4H_IV_DMA3		0x40	/* Chan 3 DMA interrupt */
+#	define ES4H_IV_PKT3		0x80	/* Chan 3 PKT interrupt */
+
+#define	ES4H_INTACK		0xA2060000	/* WO: Interrupt Ack */
+#	define ES4H_INTACK_8254		0x01	/* Real Time Clock (int 0) */
+#	define ES4H_INTACK_HOST		0x02	/* Host (int 1) */
+#	define ES4H_INTACK_PKT0		0x04	/* Chan 0 Pkt (int 2) */
+#	define ES4H_INTACK_PKT1		0x08	/* Chan 1 Pkt (int 3) */
+#	define ES4H_INTACK_PKT2		0x10	/* Chan 2 Pkt (int 4) */
+#	define ES4H_INTACK_PKT3		0x20	/* Chan 3 Pkt (int 5) */
+
+#define	SE6_PLX			0xA2070000	/* PLX 9060, SE-6 (PCI) only */
+						/* see plx9060.h */
+
+#define	SE6_PCI_VENDOR_ID	0x114F		/* Digi PCI vendor ID */
+#define	SE6_PCI_DEVICE_ID	0x0003		/* RS SE-6 device ID */
+#define	SE6_PCI_ID		((SE6_PCI_DEVICE_ID<<16) | SE6_PCI_VENDOR_ID)
+
+/*
+ *	IDT Interrupts
+ */
+#define	ES4H_INT_8254		IDT_INT0
+#define	ES4H_INT_HOST		IDT_INT1
+#define	ES4H_INT_ETHER0		IDT_INT2
+#define	ES4H_INT_ETHER1		IDT_INT3
+#define	ES4H_INT_ETHER2		IDT_INT4
+#define	ES4H_INT_ETHER3		IDT_INT5
+
+/*
+ *	Because there are differences between the SE-4 and the SE-6,
+ *	we assume that the following globals will be set up at init
+ *	time in main.c to containt the appropriate constants from above
+ */
+extern ushort	Gpp;		/* Softcopy of GPP register */
+extern ushort	EEck;		/* Clock bit */
+extern ushort	EEcs;		/* CS bit */
+extern ushort	EEd;		/* Data bit */
+extern ulong	I8254_Hz;	/* i8254 input frequency */
+extern ulong	IDT_Hz;		/* IDT CPU frequency */
+extern int	Nports;		/* Number of ethernet controllers */
+extern int	Nchan;		/* Nports+1 */