dm9000: Move the Davicom driver

Move the Davicom driver into drivers/net/ethernet/davicom/ and
make the necessary Kconfig and Makefile changes.

CC: Ben Dooks <ben@simtec.co.uk>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 1705 deletions

diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
deleted file mode 100644
index 8ef31dc4704d..000000000000
--- a/drivers/net/dm9000.c
+++ /dev/null
@@ -1,1705 +0,0 @@
-/*
- *      Davicom DM9000 Fast Ethernet driver for Linux.
- * 	Copyright (C) 1997  Sten Wang
- *
- * 	This program is free software; you can redistribute it and/or
- * 	modify it under the terms of the GNU General Public License
- * 	as published by the Free Software Foundation; either version 2
- * 	of the License, or (at your option) any later version.
- *
- * 	This program is distributed in the hope that it will be useful,
- * 	but WITHOUT ANY WARRANTY; without even the implied warranty of
- * 	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * 	GNU General Public License for more details.
- *
- * (C) Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
- *
- * Additional updates, Copyright:
- *	Ben Dooks <ben@simtec.co.uk>
- *	Sascha Hauer <s.hauer@pengutronix.de>
- */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/crc32.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/dm9000.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-
-#include <asm/delay.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include "dm9000.h"
-
-/* Board/System/Debug information/definition ---------------- */
-
-#define DM9000_PHY		0x40	/* PHY address 0x01 */
-
-#define CARDNAME	"dm9000"
-#define DRV_VERSION	"1.31"
-
-/*
- * Transmit timeout, default 5 seconds.
- */
-static int watchdog = 5000;
-module_param(watchdog, int, 0400);
-MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
-
-/* DM9000 register address locking.
- *
- * The DM9000 uses an address register to control where data written
- * to the data register goes. This means that the address register
- * must be preserved over interrupts or similar calls.
- *
- * During interrupt and other critical calls, a spinlock is used to
- * protect the system, but the calls themselves save the address
- * in the address register in case they are interrupting another
- * access to the device.
- *
- * For general accesses a lock is provided so that calls which are
- * allowed to sleep are serialised so that the address register does
- * not need to be saved. This lock also serves to serialise access
- * to the EEPROM and PHY access registers which are shared between
- * these two devices.
- */
-
-/* The driver supports the original DM9000E, and now the two newer
- * devices, DM9000A and DM9000B.
- */
-
-enum dm9000_type {
-	TYPE_DM9000E,	/* original DM9000 */
-	TYPE_DM9000A,
-	TYPE_DM9000B
-};
-
-/* Structure/enum declaration ------------------------------- */
-typedef struct board_info {
-
-	void __iomem	*io_addr;	/* Register I/O base address */
-	void __iomem	*io_data;	/* Data I/O address */
-	u16		 irq;		/* IRQ */
-
-	u16		tx_pkt_cnt;
-	u16		queue_pkt_len;
-	u16		queue_start_addr;
-	u16		queue_ip_summed;
-	u16		dbug_cnt;
-	u8		io_mode;		/* 0:word, 2:byte */
-	u8		phy_addr;
-	u8		imr_all;
-
-	unsigned int	flags;
-	unsigned int	in_suspend :1;
-	unsigned int	wake_supported :1;
-	int		debug_level;
-
-	enum dm9000_type type;
-
-	void (*inblk)(void __iomem *port, void *data, int length);
-	void (*outblk)(void __iomem *port, void *data, int length);
-	void (*dumpblk)(void __iomem *port, int length);
-
-	struct device	*dev;	     /* parent device */
-
-	struct resource	*addr_res;   /* resources found */
-	struct resource *data_res;
-	struct resource	*addr_req;   /* resources requested */
-	struct resource *data_req;
-	struct resource *irq_res;
-
-	int		 irq_wake;
-
-	struct mutex	 addr_lock;	/* phy and eeprom access lock */
-
-	struct delayed_work phy_poll;
-	struct net_device  *ndev;
-
-	spinlock_t	lock;
-
-	struct mii_if_info mii;
-	u32		msg_enable;
-	u32		wake_state;
-
-	int		ip_summed;
-} board_info_t;
-
-/* debug code */
-
-#define dm9000_dbg(db, lev, msg...) do {		\
-	if ((lev) < CONFIG_DM9000_DEBUGLEVEL &&		\
-	    (lev) < db->debug_level) {			\
-		dev_dbg(db->dev, msg);			\
-	}						\
-} while (0)
-
-static inline board_info_t *to_dm9000_board(struct net_device *dev)
-{
-	return netdev_priv(dev);
-}
-
-/* DM9000 network board routine ---------------------------- */
-
-static void
-dm9000_reset(board_info_t * db)
-{
-	dev_dbg(db->dev, "resetting device\n");
-
-	/* RESET device */
-	writeb(DM9000_NCR, db->io_addr);
-	udelay(200);
-	writeb(NCR_RST, db->io_data);
-	udelay(200);
-}
-
-/*
- *   Read a byte from I/O port
- */
-static u8
-ior(board_info_t * db, int reg)
-{
-	writeb(reg, db->io_addr);
-	return readb(db->io_data);
-}
-
-/*
- *   Write a byte to I/O port
- */
-
-static void
-iow(board_info_t * db, int reg, int value)
-{
-	writeb(reg, db->io_addr);
-	writeb(value, db->io_data);
-}
-
-/* routines for sending block to chip */
-
-static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count)
-{
-	writesb(reg, data, count);
-}
-
-static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count)
-{
-	writesw(reg, data, (count+1) >> 1);
-}
-
-static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count)
-{
-	writesl(reg, data, (count+3) >> 2);
-}
-
-/* input block from chip to memory */
-
-static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count)
-{
-	readsb(reg, data, count);
-}
-
-
-static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count)
-{
-	readsw(reg, data, (count+1) >> 1);
-}
-
-static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count)
-{
-	readsl(reg, data, (count+3) >> 2);
-}
-
-/* dump block from chip to null */
-
-static void dm9000_dumpblk_8bit(void __iomem *reg, int count)
-{
-	int i;
-	int tmp;
-
-	for (i = 0; i < count; i++)
-		tmp = readb(reg);
-}
-
-static void dm9000_dumpblk_16bit(void __iomem *reg, int count)
-{
-	int i;
-	int tmp;
-
-	count = (count + 1) >> 1;
-
-	for (i = 0; i < count; i++)
-		tmp = readw(reg);
-}
-
-static void dm9000_dumpblk_32bit(void __iomem *reg, int count)
-{
-	int i;
-	int tmp;
-
-	count = (count + 3) >> 2;
-
-	for (i = 0; i < count; i++)
-		tmp = readl(reg);
-}
-
-/* dm9000_set_io
- *
- * select the specified set of io routines to use with the
- * device
- */
-
-static void dm9000_set_io(struct board_info *db, int byte_width)
-{
-	/* use the size of the data resource to work out what IO
-	 * routines we want to use
-	 */
-
-	switch (byte_width) {
-	case 1:
-		db->dumpblk = dm9000_dumpblk_8bit;
-		db->outblk  = dm9000_outblk_8bit;
-		db->inblk   = dm9000_inblk_8bit;
-		break;
-
-
-	case 3:
-		dev_dbg(db->dev, ": 3 byte IO, falling back to 16bit\n");
-	case 2:
-		db->dumpblk = dm9000_dumpblk_16bit;
-		db->outblk  = dm9000_outblk_16bit;
-		db->inblk   = dm9000_inblk_16bit;
-		break;
-
-	case 4:
-	default:
-		db->dumpblk = dm9000_dumpblk_32bit;
-		db->outblk  = dm9000_outblk_32bit;
-		db->inblk   = dm9000_inblk_32bit;
-		break;
-	}
-}
-
-static void dm9000_schedule_poll(board_info_t *db)
-{
-	if (db->type == TYPE_DM9000E)
-		schedule_delayed_work(&db->phy_poll, HZ * 2);
-}
-
-static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	if (!netif_running(dev))
-		return -EINVAL;
-
-	return generic_mii_ioctl(&dm->mii, if_mii(req), cmd, NULL);
-}
-
-static unsigned int
-dm9000_read_locked(board_info_t *db, int reg)
-{
-	unsigned long flags;
-	unsigned int ret;
-
-	spin_lock_irqsave(&db->lock, flags);
-	ret = ior(db, reg);
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	return ret;
-}
-
-static int dm9000_wait_eeprom(board_info_t *db)
-{
-	unsigned int status;
-	int timeout = 8;	/* wait max 8msec */
-
-	/* The DM9000 data sheets say we should be able to
-	 * poll the ERRE bit in EPCR to wait for the EEPROM
-	 * operation. From testing several chips, this bit
-	 * does not seem to work.
-	 *
-	 * We attempt to use the bit, but fall back to the
-	 * timeout (which is why we do not return an error
-	 * on expiry) to say that the EEPROM operation has
-	 * completed.
-	 */
-
-	while (1) {
-		status = dm9000_read_locked(db, DM9000_EPCR);
-
-		if ((status & EPCR_ERRE) == 0)
-			break;
-
-		msleep(1);
-
-		if (timeout-- < 0) {
-			dev_dbg(db->dev, "timeout waiting EEPROM\n");
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- *  Read a word data from EEPROM
- */
-static void
-dm9000_read_eeprom(board_info_t *db, int offset, u8 *to)
-{
-	unsigned long flags;
-
-	if (db->flags & DM9000_PLATF_NO_EEPROM) {
-		to[0] = 0xff;
-		to[1] = 0xff;
-		return;
-	}
-
-	mutex_lock(&db->addr_lock);
-
-	spin_lock_irqsave(&db->lock, flags);
-
-	iow(db, DM9000_EPAR, offset);
-	iow(db, DM9000_EPCR, EPCR_ERPRR);
-
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	dm9000_wait_eeprom(db);
-
-	/* delay for at-least 150uS */
-	msleep(1);
-
-	spin_lock_irqsave(&db->lock, flags);
-
-	iow(db, DM9000_EPCR, 0x0);
-
-	to[0] = ior(db, DM9000_EPDRL);
-	to[1] = ior(db, DM9000_EPDRH);
-
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	mutex_unlock(&db->addr_lock);
-}
-
-/*
- * Write a word data to SROM
- */
-static void
-dm9000_write_eeprom(board_info_t *db, int offset, u8 *data)
-{
-	unsigned long flags;
-
-	if (db->flags & DM9000_PLATF_NO_EEPROM)
-		return;
-
-	mutex_lock(&db->addr_lock);
-
-	spin_lock_irqsave(&db->lock, flags);
-	iow(db, DM9000_EPAR, offset);
-	iow(db, DM9000_EPDRH, data[1]);
-	iow(db, DM9000_EPDRL, data[0]);
-	iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	dm9000_wait_eeprom(db);
-
-	mdelay(1);	/* wait at least 150uS to clear */
-
-	spin_lock_irqsave(&db->lock, flags);
-	iow(db, DM9000_EPCR, 0);
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	mutex_unlock(&db->addr_lock);
-}
-
-/* ethtool ops */
-
-static void dm9000_get_drvinfo(struct net_device *dev,
-			       struct ethtool_drvinfo *info)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	strcpy(info->driver, CARDNAME);
-	strcpy(info->version, DRV_VERSION);
-	strcpy(info->bus_info, to_platform_device(dm->dev)->name);
-}
-
-static u32 dm9000_get_msglevel(struct net_device *dev)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	return dm->msg_enable;
-}
-
-static void dm9000_set_msglevel(struct net_device *dev, u32 value)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	dm->msg_enable = value;
-}
-
-static int dm9000_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	mii_ethtool_gset(&dm->mii, cmd);
-	return 0;
-}
-
-static int dm9000_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	return mii_ethtool_sset(&dm->mii, cmd);
-}
-
-static int dm9000_nway_reset(struct net_device *dev)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-	return mii_nway_restart(&dm->mii);
-}
-
-static int dm9000_set_features(struct net_device *dev, u32 features)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-	u32 changed = dev->features ^ features;
-	unsigned long flags;
-
-	if (!(changed & NETIF_F_RXCSUM))
-		return 0;
-
-	spin_lock_irqsave(&dm->lock, flags);
-	iow(dm, DM9000_RCSR, (features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0);
-	spin_unlock_irqrestore(&dm->lock, flags);
-
-	return 0;
-}
-
-static u32 dm9000_get_link(struct net_device *dev)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-	u32 ret;
-
-	if (dm->flags & DM9000_PLATF_EXT_PHY)
-		ret = mii_link_ok(&dm->mii);
-	else
-		ret = dm9000_read_locked(dm, DM9000_NSR) & NSR_LINKST ? 1 : 0;
-
-	return ret;
-}
-
-#define DM_EEPROM_MAGIC		(0x444D394B)
-
-static int dm9000_get_eeprom_len(struct net_device *dev)
-{
-	return 128;
-}
-
-static int dm9000_get_eeprom(struct net_device *dev,
-			     struct ethtool_eeprom *ee, u8 *data)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-	int offset = ee->offset;
-	int len = ee->len;
-	int i;
-
-	/* EEPROM access is aligned to two bytes */
-
-	if ((len & 1) != 0 || (offset & 1) != 0)
-		return -EINVAL;
-
-	if (dm->flags & DM9000_PLATF_NO_EEPROM)
-		return -ENOENT;
-
-	ee->magic = DM_EEPROM_MAGIC;
-
-	for (i = 0; i < len; i += 2)
-		dm9000_read_eeprom(dm, (offset + i) / 2, data + i);
-
-	return 0;
-}
-
-static int dm9000_set_eeprom(struct net_device *dev,
-			     struct ethtool_eeprom *ee, u8 *data)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-	int offset = ee->offset;
-	int len = ee->len;
-	int done;
-
-	/* EEPROM access is aligned to two bytes */
-
-	if (dm->flags & DM9000_PLATF_NO_EEPROM)
-		return -ENOENT;
-
-	if (ee->magic != DM_EEPROM_MAGIC)
-		return -EINVAL;
-
-	while (len > 0) {
-		if (len & 1 || offset & 1) {
-			int which = offset & 1;
-			u8 tmp[2];
-
-			dm9000_read_eeprom(dm, offset / 2, tmp);
-			tmp[which] = *data;
-			dm9000_write_eeprom(dm, offset / 2, tmp);
-
-			done = 1;
-		} else {
-			dm9000_write_eeprom(dm, offset / 2, data);
-			done = 2;
-		}
-
-		data += done;
-		offset += done;
-		len -= done;
-	}
-
-	return 0;
-}
-
-static void dm9000_get_wol(struct net_device *dev, struct ethtool_wolinfo *w)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	memset(w, 0, sizeof(struct ethtool_wolinfo));
-
-	/* note, we could probably support wake-phy too */
-	w->supported = dm->wake_supported ? WAKE_MAGIC : 0;
-	w->wolopts = dm->wake_state;
-}
-
-static int dm9000_set_wol(struct net_device *dev, struct ethtool_wolinfo *w)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-	unsigned long flags;
-	u32 opts = w->wolopts;
-	u32 wcr = 0;
-
-	if (!dm->wake_supported)
-		return -EOPNOTSUPP;
-
-	if (opts & ~WAKE_MAGIC)
-		return -EINVAL;
-
-	if (opts & WAKE_MAGIC)
-		wcr |= WCR_MAGICEN;
-
-	mutex_lock(&dm->addr_lock);
-
-	spin_lock_irqsave(&dm->lock, flags);
-	iow(dm, DM9000_WCR, wcr);
-	spin_unlock_irqrestore(&dm->lock, flags);
-
-	mutex_unlock(&dm->addr_lock);
-
-	if (dm->wake_state != opts) {
-		/* change in wol state, update IRQ state */
-
-		if (!dm->wake_state)
-			irq_set_irq_wake(dm->irq_wake, 1);
-		else if (dm->wake_state & !opts)
-			irq_set_irq_wake(dm->irq_wake, 0);
-	}
-
-	dm->wake_state = opts;
-	return 0;
-}
-
-static const struct ethtool_ops dm9000_ethtool_ops = {
-	.get_drvinfo		= dm9000_get_drvinfo,
-	.get_settings		= dm9000_get_settings,
-	.set_settings		= dm9000_set_settings,
-	.get_msglevel		= dm9000_get_msglevel,
-	.set_msglevel		= dm9000_set_msglevel,
-	.nway_reset		= dm9000_nway_reset,
-	.get_link		= dm9000_get_link,
-	.get_wol		= dm9000_get_wol,
-	.set_wol		= dm9000_set_wol,
- 	.get_eeprom_len		= dm9000_get_eeprom_len,
- 	.get_eeprom		= dm9000_get_eeprom,
- 	.set_eeprom		= dm9000_set_eeprom,
-};
-
-static void dm9000_show_carrier(board_info_t *db,
-				unsigned carrier, unsigned nsr)
-{
-	struct net_device *ndev = db->ndev;
-	unsigned ncr = dm9000_read_locked(db, DM9000_NCR);
-
-	if (carrier)
-		dev_info(db->dev, "%s: link up, %dMbps, %s-duplex, no LPA\n",
-			 ndev->name, (nsr & NSR_SPEED) ? 10 : 100,
-			 (ncr & NCR_FDX) ? "full" : "half");
-	else
-		dev_info(db->dev, "%s: link down\n", ndev->name);
-}
-
-static void
-dm9000_poll_work(struct work_struct *w)
-{
-	struct delayed_work *dw = to_delayed_work(w);
-	board_info_t *db = container_of(dw, board_info_t, phy_poll);
-	struct net_device *ndev = db->ndev;
-
-	if (db->flags & DM9000_PLATF_SIMPLE_PHY &&
-	    !(db->flags & DM9000_PLATF_EXT_PHY)) {
-		unsigned nsr = dm9000_read_locked(db, DM9000_NSR);
-		unsigned old_carrier = netif_carrier_ok(ndev) ? 1 : 0;
-		unsigned new_carrier;
-
-		new_carrier = (nsr & NSR_LINKST) ? 1 : 0;
-
-		if (old_carrier != new_carrier) {
-			if (netif_msg_link(db))
-				dm9000_show_carrier(db, new_carrier, nsr);
-
-			if (!new_carrier)
-				netif_carrier_off(ndev);
-			else
-				netif_carrier_on(ndev);
-		}
-	} else
-		mii_check_media(&db->mii, netif_msg_link(db), 0);
-	
-	if (netif_running(ndev))
-		dm9000_schedule_poll(db);
-}
-
-/* dm9000_release_board
- *
- * release a board, and any mapped resources
- */
-
-static void
-dm9000_release_board(struct platform_device *pdev, struct board_info *db)
-{
-	/* unmap our resources */
-
-	iounmap(db->io_addr);
-	iounmap(db->io_data);
-
-	/* release the resources */
-
-	release_resource(db->data_req);
-	kfree(db->data_req);
-
-	release_resource(db->addr_req);
-	kfree(db->addr_req);
-}
-
-static unsigned char dm9000_type_to_char(enum dm9000_type type)
-{
-	switch (type) {
-	case TYPE_DM9000E: return 'e';
-	case TYPE_DM9000A: return 'a';
-	case TYPE_DM9000B: return 'b';
-	}
-
-	return '?';
-}
-
-/*
- *  Set DM9000 multicast address
- */
-static void
-dm9000_hash_table_unlocked(struct net_device *dev)
-{
-	board_info_t *db = netdev_priv(dev);
-	struct netdev_hw_addr *ha;
-	int i, oft;
-	u32 hash_val;
-	u16 hash_table[4];
-	u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
-
-	dm9000_dbg(db, 1, "entering %s\n", __func__);
-
-	for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
-		iow(db, oft, dev->dev_addr[i]);
-
-	/* Clear Hash Table */
-	for (i = 0; i < 4; i++)
-		hash_table[i] = 0x0;
-
-	/* broadcast address */
-	hash_table[3] = 0x8000;
-
-	if (dev->flags & IFF_PROMISC)
-		rcr |= RCR_PRMSC;
-
-	if (dev->flags & IFF_ALLMULTI)
-		rcr |= RCR_ALL;
-
-	/* the multicast address in Hash Table : 64 bits */
-	netdev_for_each_mc_addr(ha, dev) {
-		hash_val = ether_crc_le(6, ha->addr) & 0x3f;
-		hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
-	}
-
-	/* Write the hash table to MAC MD table */
-	for (i = 0, oft = DM9000_MAR; i < 4; i++) {
-		iow(db, oft++, hash_table[i]);
-		iow(db, oft++, hash_table[i] >> 8);
-	}
-
-	iow(db, DM9000_RCR, rcr);
-}
-
-static void
-dm9000_hash_table(struct net_device *dev)
-{
-	board_info_t *db = netdev_priv(dev);
-	unsigned long flags;
-
-	spin_lock_irqsave(&db->lock, flags);
-	dm9000_hash_table_unlocked(dev);
-	spin_unlock_irqrestore(&db->lock, flags);
-}
-
-/*
- * Initialize dm9000 board
- */
-static void
-dm9000_init_dm9000(struct net_device *dev)
-{
-	board_info_t *db = netdev_priv(dev);
-	unsigned int imr;
-	unsigned int ncr;
-
-	dm9000_dbg(db, 1, "entering %s\n", __func__);
-
-	/* I/O mode */
-	db->io_mode = ior(db, DM9000_ISR) >> 6;	/* ISR bit7:6 keeps I/O mode */
-
-	/* Checksum mode */
-	if (dev->hw_features & NETIF_F_RXCSUM)
-		iow(db, DM9000_RCSR,
-			(dev->features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0);
-
-	iow(db, DM9000_GPCR, GPCR_GEP_CNTL);	/* Let GPIO0 output */
-
-	ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
-
-	/* if wol is needed, then always set NCR_WAKEEN otherwise we end
-	 * up dumping the wake events if we disable this. There is already
-	 * a wake-mask in DM9000_WCR */
-	if (db->wake_supported)
-		ncr |= NCR_WAKEEN;
-
-	iow(db, DM9000_NCR, ncr);
-
-	/* Program operating register */
-	iow(db, DM9000_TCR, 0);	        /* TX Polling clear */
-	iow(db, DM9000_BPTR, 0x3f);	/* Less 3Kb, 200us */
-	iow(db, DM9000_FCR, 0xff);	/* Flow Control */
-	iow(db, DM9000_SMCR, 0);        /* Special Mode */
-	/* clear TX status */
-	iow(db, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
-	iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */
-
-	/* Set address filter table */
-	dm9000_hash_table_unlocked(dev);
-
-	imr = IMR_PAR | IMR_PTM | IMR_PRM;
-	if (db->type != TYPE_DM9000E)
-		imr |= IMR_LNKCHNG;
-
-	db->imr_all = imr;
-
-	/* Enable TX/RX interrupt mask */
-	iow(db, DM9000_IMR, imr);
-
-	/* Init Driver variable */
-	db->tx_pkt_cnt = 0;
-	db->queue_pkt_len = 0;
-	dev->trans_start = jiffies;
-}
-
-/* Our watchdog timed out. Called by the networking layer */
-static void dm9000_timeout(struct net_device *dev)
-{
-	board_info_t *db = netdev_priv(dev);
-	u8 reg_save;
-	unsigned long flags;
-
-	/* Save previous register address */
-	spin_lock_irqsave(&db->lock, flags);
-	reg_save = readb(db->io_addr);
-
-	netif_stop_queue(dev);
-	dm9000_reset(db);
-	dm9000_init_dm9000(dev);
-	/* We can accept TX packets again */
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	netif_wake_queue(dev);
-
-	/* Restore previous register address */
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(&db->lock, flags);
-}
-
-static void dm9000_send_packet(struct net_device *dev,
-			       int ip_summed,
-			       u16 pkt_len)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	/* The DM9000 is not smart enough to leave fragmented packets alone. */
-	if (dm->ip_summed != ip_summed) {
-		if (ip_summed == CHECKSUM_NONE)
-			iow(dm, DM9000_TCCR, 0);
-		else
-			iow(dm, DM9000_TCCR, TCCR_IP | TCCR_UDP | TCCR_TCP);
-		dm->ip_summed = ip_summed;
-	}
-
-	/* Set TX length to DM9000 */
-	iow(dm, DM9000_TXPLL, pkt_len);
-	iow(dm, DM9000_TXPLH, pkt_len >> 8);
-
-	/* Issue TX polling command */
-	iow(dm, DM9000_TCR, TCR_TXREQ);	/* Cleared after TX complete */
-}
-
-/*
- *  Hardware start transmission.
- *  Send a packet to media from the upper layer.
- */
-static int
-dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	unsigned long flags;
-	board_info_t *db = netdev_priv(dev);
-
-	dm9000_dbg(db, 3, "%s:\n", __func__);
-
-	if (db->tx_pkt_cnt > 1)
-		return NETDEV_TX_BUSY;
-
-	spin_lock_irqsave(&db->lock, flags);
-
-	/* Move data to DM9000 TX RAM */
-	writeb(DM9000_MWCMD, db->io_addr);
-
-	(db->outblk)(db->io_data, skb->data, skb->len);
-	dev->stats.tx_bytes += skb->len;
-
-	db->tx_pkt_cnt++;
-	/* TX control: First packet immediately send, second packet queue */
-	if (db->tx_pkt_cnt == 1) {
-		dm9000_send_packet(dev, skb->ip_summed, skb->len);
-	} else {
-		/* Second packet */
-		db->queue_pkt_len = skb->len;
-		db->queue_ip_summed = skb->ip_summed;
-		netif_stop_queue(dev);
-	}
-
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	/* free this SKB */
-	dev_kfree_skb(skb);
-
-	return NETDEV_TX_OK;
-}
-
-/*
- * DM9000 interrupt handler
- * receive the packet to upper layer, free the transmitted packet
- */
-
-static void dm9000_tx_done(struct net_device *dev, board_info_t *db)
-{
-	int tx_status = ior(db, DM9000_NSR);	/* Got TX status */
-
-	if (tx_status & (NSR_TX2END | NSR_TX1END)) {
-		/* One packet sent complete */
-		db->tx_pkt_cnt--;
-		dev->stats.tx_packets++;
-
-		if (netif_msg_tx_done(db))
-			dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status);
-
-		/* Queue packet check & send */
-		if (db->tx_pkt_cnt > 0)
-			dm9000_send_packet(dev, db->queue_ip_summed,
-					   db->queue_pkt_len);
-		netif_wake_queue(dev);
-	}
-}
-
-struct dm9000_rxhdr {
-	u8	RxPktReady;
-	u8	RxStatus;
-	__le16	RxLen;
-} __packed;
-
-/*
- *  Received a packet and pass to upper layer
- */
-static void
-dm9000_rx(struct net_device *dev)
-{
-	board_info_t *db = netdev_priv(dev);
-	struct dm9000_rxhdr rxhdr;
-	struct sk_buff *skb;
-	u8 rxbyte, *rdptr;
-	bool GoodPacket;
-	int RxLen;
-
-	/* Check packet ready or not */
-	do {
-		ior(db, DM9000_MRCMDX);	/* Dummy read */
-
-		/* Get most updated data */
-		rxbyte = readb(db->io_data);
-
-		/* Status check: this byte must be 0 or 1 */
-		if (rxbyte & DM9000_PKT_ERR) {
-			dev_warn(db->dev, "status check fail: %d\n", rxbyte);
-			iow(db, DM9000_RCR, 0x00);	/* Stop Device */
-			iow(db, DM9000_ISR, IMR_PAR);	/* Stop INT request */
-			return;
-		}
-
-		if (!(rxbyte & DM9000_PKT_RDY))
-			return;
-
-		/* A packet ready now  & Get status/length */
-		GoodPacket = true;
-		writeb(DM9000_MRCMD, db->io_addr);
-
-		(db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr));
-
-		RxLen = le16_to_cpu(rxhdr.RxLen);
-
-		if (netif_msg_rx_status(db))
-			dev_dbg(db->dev, "RX: status %02x, length %04x\n",
-				rxhdr.RxStatus, RxLen);
-
-		/* Packet Status check */
-		if (RxLen < 0x40) {
-			GoodPacket = false;
-			if (netif_msg_rx_err(db))
-				dev_dbg(db->dev, "RX: Bad Packet (runt)\n");
-		}
-
-		if (RxLen > DM9000_PKT_MAX) {
-			dev_dbg(db->dev, "RST: RX Len:%x\n", RxLen);
-		}
-
-		/* rxhdr.RxStatus is identical to RSR register. */
-		if (rxhdr.RxStatus & (RSR_FOE | RSR_CE | RSR_AE |
-				      RSR_PLE | RSR_RWTO |
-				      RSR_LCS | RSR_RF)) {
-			GoodPacket = false;
-			if (rxhdr.RxStatus & RSR_FOE) {
-				if (netif_msg_rx_err(db))
-					dev_dbg(db->dev, "fifo error\n");
-				dev->stats.rx_fifo_errors++;
-			}
-			if (rxhdr.RxStatus & RSR_CE) {
-				if (netif_msg_rx_err(db))
-					dev_dbg(db->dev, "crc error\n");
-				dev->stats.rx_crc_errors++;
-			}
-			if (rxhdr.RxStatus & RSR_RF) {
-				if (netif_msg_rx_err(db))
-					dev_dbg(db->dev, "length error\n");
-				dev->stats.rx_length_errors++;
-			}
-		}
-
-		/* Move data from DM9000 */
-		if (GoodPacket &&
-		    ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) {
-			skb_reserve(skb, 2);
-			rdptr = (u8 *) skb_put(skb, RxLen - 4);
-
-			/* Read received packet from RX SRAM */
-
-			(db->inblk)(db->io_data, rdptr, RxLen);
-			dev->stats.rx_bytes += RxLen;
-
-			/* Pass to upper layer */
-			skb->protocol = eth_type_trans(skb, dev);
-			if (dev->features & NETIF_F_RXCSUM) {
-				if ((((rxbyte & 0x1c) << 3) & rxbyte) == 0)
-					skb->ip_summed = CHECKSUM_UNNECESSARY;
-				else
-					skb_checksum_none_assert(skb);
-			}
-			netif_rx(skb);
-			dev->stats.rx_packets++;
-
-		} else {
-			/* need to dump the packet's data */
-
-			(db->dumpblk)(db->io_data, RxLen);
-		}
-	} while (rxbyte & DM9000_PKT_RDY);
-}
-
-static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	board_info_t *db = netdev_priv(dev);
-	int int_status;
-	unsigned long flags;
-	u8 reg_save;
-
-	dm9000_dbg(db, 3, "entering %s\n", __func__);
-
-	/* A real interrupt coming */
-
-	/* holders of db->lock must always block IRQs */
-	spin_lock_irqsave(&db->lock, flags);
-
-	/* Save previous register address */
-	reg_save = readb(db->io_addr);
-
-	/* Disable all interrupts */
-	iow(db, DM9000_IMR, IMR_PAR);
-
-	/* Got DM9000 interrupt status */
-	int_status = ior(db, DM9000_ISR);	/* Got ISR */
-	iow(db, DM9000_ISR, int_status);	/* Clear ISR status */
-
-	if (netif_msg_intr(db))
-		dev_dbg(db->dev, "interrupt status %02x\n", int_status);
-
-	/* Received the coming packet */
-	if (int_status & ISR_PRS)
-		dm9000_rx(dev);
-
-	/* Trnasmit Interrupt check */
-	if (int_status & ISR_PTS)
-		dm9000_tx_done(dev, db);
-
-	if (db->type != TYPE_DM9000E) {
-		if (int_status & ISR_LNKCHNG) {
-			/* fire a link-change request */
-			schedule_delayed_work(&db->phy_poll, 1);
-		}
-	}
-
-	/* Re-enable interrupt mask */
-	iow(db, DM9000_IMR, db->imr_all);
-
-	/* Restore previous register address */
-	writeb(reg_save, db->io_addr);
-
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dm9000_wol_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	board_info_t *db = netdev_priv(dev);
-	unsigned long flags;
-	unsigned nsr, wcr;
-
-	spin_lock_irqsave(&db->lock, flags);
-
-	nsr = ior(db, DM9000_NSR);
-	wcr = ior(db, DM9000_WCR);
-
-	dev_dbg(db->dev, "%s: NSR=0x%02x, WCR=0x%02x\n", __func__, nsr, wcr);
-
-	if (nsr & NSR_WAKEST) {
-		/* clear, so we can avoid */
-		iow(db, DM9000_NSR, NSR_WAKEST);
-
-		if (wcr & WCR_LINKST)
-			dev_info(db->dev, "wake by link status change\n");
-		if (wcr & WCR_SAMPLEST)
-			dev_info(db->dev, "wake by sample packet\n");
-		if (wcr & WCR_MAGICST )
-			dev_info(db->dev, "wake by magic packet\n");
-		if (!(wcr & (WCR_LINKST | WCR_SAMPLEST | WCR_MAGICST)))
-			dev_err(db->dev, "wake signalled with no reason? "
-				"NSR=0x%02x, WSR=0x%02x\n", nsr, wcr);
-
-	}
-
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	return (nsr & NSR_WAKEST) ? IRQ_HANDLED : IRQ_NONE;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- *Used by netconsole
- */
-static void dm9000_poll_controller(struct net_device *dev)
-{
-	disable_irq(dev->irq);
-	dm9000_interrupt(dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-/*
- *  Open the interface.
- *  The interface is opened whenever "ifconfig" actives it.
- */
-static int
-dm9000_open(struct net_device *dev)
-{
-	board_info_t *db = netdev_priv(dev);
-	unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
-
-	if (netif_msg_ifup(db))
-		dev_dbg(db->dev, "enabling %s\n", dev->name);
-
-	/* If there is no IRQ type specified, default to something that
-	 * may work, and tell the user that this is a problem */
-
-	if (irqflags == IRQF_TRIGGER_NONE)
-		dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
-
-	irqflags |= IRQF_SHARED;
-
-	/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
-	iow(db, DM9000_GPR, 0);	/* REG_1F bit0 activate phyxcer */
-	mdelay(1); /* delay needs by DM9000B */
-
-	/* Initialize DM9000 board */
-	dm9000_reset(db);
-	dm9000_init_dm9000(dev);
-
-	if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
-		return -EAGAIN;
-
-	/* Init driver variable */
-	db->dbug_cnt = 0;
-
-	mii_check_media(&db->mii, netif_msg_link(db), 1);
-	netif_start_queue(dev);
-	
-	dm9000_schedule_poll(db);
-
-	return 0;
-}
-
-/*
- * Sleep, either by using msleep() or if we are suspending, then
- * use mdelay() to sleep.
- */
-static void dm9000_msleep(board_info_t *db, unsigned int ms)
-{
-	if (db->in_suspend)
-		mdelay(ms);
-	else
-		msleep(ms);
-}
-
-/*
- *   Read a word from phyxcer
- */
-static int
-dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
-{
-	board_info_t *db = netdev_priv(dev);
-	unsigned long flags;
-	unsigned int reg_save;
-	int ret;
-
-	mutex_lock(&db->addr_lock);
-
-	spin_lock_irqsave(&db->lock,flags);
-
-	/* Save previous register address */
-	reg_save = readb(db->io_addr);
-
-	/* Fill the phyxcer register into REG_0C */
-	iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
-	iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);	/* Issue phyxcer read command */
-
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(&db->lock,flags);
-
-	dm9000_msleep(db, 1);		/* Wait read complete */
-
-	spin_lock_irqsave(&db->lock,flags);
-	reg_save = readb(db->io_addr);
-
-	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer read command */
-
-	/* The read data keeps on REG_0D & REG_0E */
-	ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
-
-	/* restore the previous address */
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(&db->lock,flags);
-
-	mutex_unlock(&db->addr_lock);
-
-	dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
-	return ret;
-}
-
-/*
- *   Write a word to phyxcer
- */
-static void
-dm9000_phy_write(struct net_device *dev,
-		 int phyaddr_unused, int reg, int value)
-{
-	board_info_t *db = netdev_priv(dev);
-	unsigned long flags;
-	unsigned long reg_save;
-
-	dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
-	mutex_lock(&db->addr_lock);
-
-	spin_lock_irqsave(&db->lock,flags);
-
-	/* Save previous register address */
-	reg_save = readb(db->io_addr);
-
-	/* Fill the phyxcer register into REG_0C */
-	iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
-	/* Fill the written data into REG_0D & REG_0E */
-	iow(db, DM9000_EPDRL, value);
-	iow(db, DM9000_EPDRH, value >> 8);
-
-	iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);	/* Issue phyxcer write command */
-
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	dm9000_msleep(db, 1);		/* Wait write complete */
-
-	spin_lock_irqsave(&db->lock,flags);
-	reg_save = readb(db->io_addr);
-
-	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
-
-	/* restore the previous address */
-	writeb(reg_save, db->io_addr);
-
-	spin_unlock_irqrestore(&db->lock, flags);
-	mutex_unlock(&db->addr_lock);
-}
-
-static void
-dm9000_shutdown(struct net_device *dev)
-{
-	board_info_t *db = netdev_priv(dev);
-
-	/* RESET device */
-	dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET);	/* PHY RESET */
-	iow(db, DM9000_GPR, 0x01);	/* Power-Down PHY */
-	iow(db, DM9000_IMR, IMR_PAR);	/* Disable all interrupt */
-	iow(db, DM9000_RCR, 0x00);	/* Disable RX */
-}
-
-/*
- * Stop the interface.
- * The interface is stopped when it is brought.
- */
-static int
-dm9000_stop(struct net_device *ndev)
-{
-	board_info_t *db = netdev_priv(ndev);
-
-	if (netif_msg_ifdown(db))
-		dev_dbg(db->dev, "shutting down %s\n", ndev->name);
-
-	cancel_delayed_work_sync(&db->phy_poll);
-
-	netif_stop_queue(ndev);
-	netif_carrier_off(ndev);
-
-	/* free interrupt */
-	free_irq(ndev->irq, ndev);
-
-	dm9000_shutdown(ndev);
-
-	return 0;
-}
-
-static const struct net_device_ops dm9000_netdev_ops = {
-	.ndo_open		= dm9000_open,
-	.ndo_stop		= dm9000_stop,
-	.ndo_start_xmit		= dm9000_start_xmit,
-	.ndo_tx_timeout		= dm9000_timeout,
-	.ndo_set_multicast_list	= dm9000_hash_table,
-	.ndo_do_ioctl		= dm9000_ioctl,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_features	= dm9000_set_features,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= dm9000_poll_controller,
-#endif
-};
-
-/*
- * Search DM9000 board, allocate space and register it
- */
-static int __devinit
-dm9000_probe(struct platform_device *pdev)
-{
-	struct dm9000_plat_data *pdata = pdev->dev.platform_data;
-	struct board_info *db;	/* Point a board information structure */
-	struct net_device *ndev;
-	const unsigned char *mac_src;
-	int ret = 0;
-	int iosize;
-	int i;
-	u32 id_val;
-
-	/* Init network device */
-	ndev = alloc_etherdev(sizeof(struct board_info));
-	if (!ndev) {
-		dev_err(&pdev->dev, "could not allocate device.\n");
-		return -ENOMEM;
-	}
-
-	SET_NETDEV_DEV(ndev, &pdev->dev);
-
-	dev_dbg(&pdev->dev, "dm9000_probe()\n");
-
-	/* setup board info structure */
-	db = netdev_priv(ndev);
-
-	db->dev = &pdev->dev;
-	db->ndev = ndev;
-
-	spin_lock_init(&db->lock);
-	mutex_init(&db->addr_lock);
-
-	INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work);
-
-	db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	db->irq_res  = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-
-	if (db->addr_res == NULL || db->data_res == NULL ||
-	    db->irq_res == NULL) {
-		dev_err(db->dev, "insufficient resources\n");
-		ret = -ENOENT;
-		goto out;
-	}
-
-	db->irq_wake = platform_get_irq(pdev, 1);
-	if (db->irq_wake >= 0) {
-		dev_dbg(db->dev, "wakeup irq %d\n", db->irq_wake);
-
-		ret = request_irq(db->irq_wake, dm9000_wol_interrupt,
-				  IRQF_SHARED, dev_name(db->dev), ndev);
-		if (ret) {
-			dev_err(db->dev, "cannot get wakeup irq (%d)\n", ret);
-		} else {
-
-			/* test to see if irq is really wakeup capable */
-			ret = irq_set_irq_wake(db->irq_wake, 1);
-			if (ret) {
-				dev_err(db->dev, "irq %d cannot set wakeup (%d)\n",
-					db->irq_wake, ret);
-				ret = 0;
-			} else {
-				irq_set_irq_wake(db->irq_wake, 0);
-				db->wake_supported = 1;
-			}
-		}
-	}
-
-	iosize = resource_size(db->addr_res);
-	db->addr_req = request_mem_region(db->addr_res->start, iosize,
-					  pdev->name);
-
-	if (db->addr_req == NULL) {
-		dev_err(db->dev, "cannot claim address reg area\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	db->io_addr = ioremap(db->addr_res->start, iosize);
-
-	if (db->io_addr == NULL) {
-		dev_err(db->dev, "failed to ioremap address reg\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	iosize = resource_size(db->data_res);
-	db->data_req = request_mem_region(db->data_res->start, iosize,
-					  pdev->name);
-
-	if (db->data_req == NULL) {
-		dev_err(db->dev, "cannot claim data reg area\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	db->io_data = ioremap(db->data_res->start, iosize);
-
-	if (db->io_data == NULL) {
-		dev_err(db->dev, "failed to ioremap data reg\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* fill in parameters for net-dev structure */
-	ndev->base_addr = (unsigned long)db->io_addr;
-	ndev->irq	= db->irq_res->start;
-
-	/* ensure at least we have a default set of IO routines */
-	dm9000_set_io(db, iosize);
-
-	/* check to see if anything is being over-ridden */
-	if (pdata != NULL) {
-		/* check to see if the driver wants to over-ride the
-		 * default IO width */
-
-		if (pdata->flags & DM9000_PLATF_8BITONLY)
-			dm9000_set_io(db, 1);
-
-		if (pdata->flags & DM9000_PLATF_16BITONLY)
-			dm9000_set_io(db, 2);
-
-		if (pdata->flags & DM9000_PLATF_32BITONLY)
-			dm9000_set_io(db, 4);
-
-		/* check to see if there are any IO routine
-		 * over-rides */
-
-		if (pdata->inblk != NULL)
-			db->inblk = pdata->inblk;
-
-		if (pdata->outblk != NULL)
-			db->outblk = pdata->outblk;
-
-		if (pdata->dumpblk != NULL)
-			db->dumpblk = pdata->dumpblk;
-
-		db->flags = pdata->flags;
-	}
-
-#ifdef CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL
-	db->flags |= DM9000_PLATF_SIMPLE_PHY;
-#endif
-
-	dm9000_reset(db);
-
-	/* try multiple times, DM9000 sometimes gets the read wrong */
-	for (i = 0; i < 8; i++) {
-		id_val  = ior(db, DM9000_VIDL);
-		id_val |= (u32)ior(db, DM9000_VIDH) << 8;
-		id_val |= (u32)ior(db, DM9000_PIDL) << 16;
-		id_val |= (u32)ior(db, DM9000_PIDH) << 24;
-
-		if (id_val == DM9000_ID)
-			break;
-		dev_err(db->dev, "read wrong id 0x%08x\n", id_val);
-	}
-
-	if (id_val != DM9000_ID) {
-		dev_err(db->dev, "wrong id: 0x%08x\n", id_val);
-		ret = -ENODEV;
-		goto out;
-	}
-
-	/* Identify what type of DM9000 we are working on */
-
-	id_val = ior(db, DM9000_CHIPR);
-	dev_dbg(db->dev, "dm9000 revision 0x%02x\n", id_val);
-
-	switch (id_val) {
-	case CHIPR_DM9000A:
-		db->type = TYPE_DM9000A;
-		break;
-	case CHIPR_DM9000B:
-		db->type = TYPE_DM9000B;
-		break;
-	default:
-		dev_dbg(db->dev, "ID %02x => defaulting to DM9000E\n", id_val);
-		db->type = TYPE_DM9000E;
-	}
-
-	/* dm9000a/b are capable of hardware checksum offload */
-	if (db->type == TYPE_DM9000A || db->type == TYPE_DM9000B) {
-		ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
-		ndev->features |= ndev->hw_features;
-	}
-
-	/* from this point we assume that we have found a DM9000 */
-
-	/* driver system function */
-	ether_setup(ndev);
-
-	ndev->netdev_ops	= &dm9000_netdev_ops;
-	ndev->watchdog_timeo	= msecs_to_jiffies(watchdog);
-	ndev->ethtool_ops	= &dm9000_ethtool_ops;
-
-	db->msg_enable       = NETIF_MSG_LINK;
-	db->mii.phy_id_mask  = 0x1f;
-	db->mii.reg_num_mask = 0x1f;
-	db->mii.force_media  = 0;
-	db->mii.full_duplex  = 0;
-	db->mii.dev	     = ndev;
-	db->mii.mdio_read    = dm9000_phy_read;
-	db->mii.mdio_write   = dm9000_phy_write;
-
-	mac_src = "eeprom";
-
-	/* try reading the node address from the attached EEPROM */
-	for (i = 0; i < 6; i += 2)
-		dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
-
-	if (!is_valid_ether_addr(ndev->dev_addr) && pdata != NULL) {
-		mac_src = "platform data";
-		memcpy(ndev->dev_addr, pdata->dev_addr, 6);
-	}
-
-	if (!is_valid_ether_addr(ndev->dev_addr)) {
-		/* try reading from mac */
-		
-		mac_src = "chip";
-		for (i = 0; i < 6; i++)
-			ndev->dev_addr[i] = ior(db, i+DM9000_PAR);
-	}
-
-	if (!is_valid_ether_addr(ndev->dev_addr)) {
-		dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please "
-			 "set using ifconfig\n", ndev->name);
-
-		random_ether_addr(ndev->dev_addr);
-		mac_src = "random";
-	}
-
-
-	platform_set_drvdata(pdev, ndev);
-	ret = register_netdev(ndev);
-
-	if (ret == 0)
-		printk(KERN_INFO "%s: dm9000%c at %p,%p IRQ %d MAC: %pM (%s)\n",
-		       ndev->name, dm9000_type_to_char(db->type),
-		       db->io_addr, db->io_data, ndev->irq,
-		       ndev->dev_addr, mac_src);
-	return 0;
-
-out:
-	dev_err(db->dev, "not found (%d).\n", ret);
-
-	dm9000_release_board(pdev, db);
-	free_netdev(ndev);
-
-	return ret;
-}
-
-static int
-dm9000_drv_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	board_info_t *db;
-
-	if (ndev) {
-		db = netdev_priv(ndev);
-		db->in_suspend = 1;
-
-		if (!netif_running(ndev))
-			return 0;
-
-		netif_device_detach(ndev);
-
-		/* only shutdown if not using WoL */
-		if (!db->wake_state)
-			dm9000_shutdown(ndev);
-	}
-	return 0;
-}
-
-static int
-dm9000_drv_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	board_info_t *db = netdev_priv(ndev);
-
-	if (ndev) {
-		if (netif_running(ndev)) {
-			/* reset if we were not in wake mode to ensure if
-			 * the device was powered off it is in a known state */
-			if (!db->wake_state) {
-				dm9000_reset(db);
-				dm9000_init_dm9000(ndev);
-			}
-
-			netif_device_attach(ndev);
-		}
-
-		db->in_suspend = 0;
-	}
-	return 0;
-}
-
-static const struct dev_pm_ops dm9000_drv_pm_ops = {
-	.suspend	= dm9000_drv_suspend,
-	.resume		= dm9000_drv_resume,
-};
-
-static int __devexit
-dm9000_drv_remove(struct platform_device *pdev)
-{
-	struct net_device *ndev = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-
-	unregister_netdev(ndev);
-	dm9000_release_board(pdev, netdev_priv(ndev));
-	free_netdev(ndev);		/* free device structure */
-
-	dev_dbg(&pdev->dev, "released and freed device\n");
-	return 0;
-}
-
-static struct platform_driver dm9000_driver = {
-	.driver	= {
-		.name    = "dm9000",
-		.owner	 = THIS_MODULE,
-		.pm	 = &dm9000_drv_pm_ops,
-	},
-	.probe   = dm9000_probe,
-	.remove  = __devexit_p(dm9000_drv_remove),
-};
-
-static int __init
-dm9000_init(void)
-{
-	printk(KERN_INFO "%s Ethernet Driver, V%s\n", CARDNAME, DRV_VERSION);
-
-	return platform_driver_register(&dm9000_driver);
-}
-
-static void __exit
-dm9000_cleanup(void)
-{
-	platform_driver_unregister(&dm9000_driver);
-}
-
-module_init(dm9000_init);
-module_exit(dm9000_cleanup);
-
-MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
-MODULE_DESCRIPTION("Davicom DM9000 network driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:dm9000");