Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
      Varadhan.

   2) Simplify classifier state on sk_buff in order to shrink it a bit.
      From Willem de Bruijn.

   3) Introduce SIPHASH and it's usage for secure sequence numbers and
      syncookies. From Jason A. Donenfeld.

   4) Reduce CPU usage for ICMP replies we are going to limit or
      suppress, from Jesper Dangaard Brouer.

   5) Introduce Shared Memory Communications socket layer, from Ursula
      Braun.

   6) Add RACK loss detection and allow it to actually trigger fast
      recovery instead of just assisting after other algorithms have
      triggered it. From Yuchung Cheng.

   7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.

   8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.

   9) Export MPLS packet stats via netlink, from Robert Shearman.

  10) Significantly improve inet port bind conflict handling, especially
      when an application is restarted and changes it's setting of
      reuseport. From Josef Bacik.

  11) Implement TX batching in vhost_net, from Jason Wang.

  12) Extend the dummy device so that VF (virtual function) features,
      such as configuration, can be more easily tested. From Phil
      Sutter.

  13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
      Dumazet.

  14) Add new bpf MAP, implementing a longest prefix match trie. From
      Daniel Mack.

  15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.

  16) Add new aquantia driver, from David VomLehn.

  17) Add bpf tracepoints, from Daniel Borkmann.

  18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
      Florian Fainelli.

  19) Remove custom busy polling in many drivers, it is done in the core
      networking since 4.5 times. From Eric Dumazet.

  20) Support XDP adjust_head in virtio_net, from John Fastabend.

  21) Fix several major holes in neighbour entry confirmation, from
      Julian Anastasov.

  22) Add XDP support to bnxt_en driver, from Michael Chan.

  23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.

  24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.

  25) Support GRO in IPSEC protocols, from Steffen Klassert"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
  Revert "ath10k: Search SMBIOS for OEM board file extension"
  net: socket: fix recvmmsg not returning error from sock_error
  bnxt_en: use eth_hw_addr_random()
  bpf: fix unlocking of jited image when module ronx not set
  arch: add ARCH_HAS_SET_MEMORY config
  net: napi_watchdog() can use napi_schedule_irqoff()
  tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
  net/hsr: use eth_hw_addr_random()
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: switch to build_skb() in the RX path
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: remove unused register definitions
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
  net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
  net: mvpp2: release reference to txq_cpu[] entry after unmapping
  net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
  net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
  net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
  ...

1 files changed, 96 insertions, 33 deletions

diff --git a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
index af54baea47cf..6033f2f6260a 100644
--- a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
@@ -15,6 +15,7 @@
 #include <linux/if_vlan.h>
 #include <linux/irq.h>
 #include <linux/gpio/consumer.h>
+#include <linux/phy.h>
 
 #ifndef UINT64_MAX
 #define UINT64_MAX		(u64)(~((u64)0))
@@ -58,6 +59,9 @@
 #define PORT_STATUS_CMODE_100BASE_X	0x8
 #define PORT_STATUS_CMODE_1000BASE_X	0x9
 #define PORT_STATUS_CMODE_SGMII		0xa
+#define PORT_STATUS_CMODE_2500BASEX	0xb
+#define PORT_STATUS_CMODE_XAUI		0xc
+#define PORT_STATUS_CMODE_RXAUI		0xd
 #define PORT_PCS_CTRL		0x01
 #define PORT_PCS_CTRL_RGMII_DELAY_RXCLK	BIT(15)
 #define PORT_PCS_CTRL_RGMII_DELAY_TXCLK	BIT(14)
@@ -87,6 +91,7 @@
 #define PORT_SWITCH_ID_PROD_NUM_6131	0x106
 #define PORT_SWITCH_ID_PROD_NUM_6320	0x115
 #define PORT_SWITCH_ID_PROD_NUM_6123	0x121
+#define PORT_SWITCH_ID_PROD_NUM_6141	0x340
 #define PORT_SWITCH_ID_PROD_NUM_6161	0x161
 #define PORT_SWITCH_ID_PROD_NUM_6165	0x165
 #define PORT_SWITCH_ID_PROD_NUM_6171	0x171
@@ -100,6 +105,7 @@
 #define PORT_SWITCH_ID_PROD_NUM_6240	0x240
 #define PORT_SWITCH_ID_PROD_NUM_6290	0x290
 #define PORT_SWITCH_ID_PROD_NUM_6321	0x310
+#define PORT_SWITCH_ID_PROD_NUM_6341	0x341
 #define PORT_SWITCH_ID_PROD_NUM_6352	0x352
 #define PORT_SWITCH_ID_PROD_NUM_6350	0x371
 #define PORT_SWITCH_ID_PROD_NUM_6351	0x375
@@ -163,6 +169,7 @@
 #define PORT_CONTROL_2_FORWARD_UNKNOWN	BIT(6)
 #define PORT_CONTROL_2_EGRESS_MONITOR	BIT(5)
 #define PORT_CONTROL_2_INGRESS_MONITOR	BIT(4)
+#define PORT_CONTROL_2_UPSTREAM_MASK	0x0f
 #define PORT_RATE_CONTROL	0x09
 #define PORT_RATE_CONTROL_2	0x0a
 #define PORT_ASSOC_VECTOR	0x0b
@@ -332,6 +339,7 @@
 #define GLOBAL_STATS_COUNTER_01	0x1f
 
 #define GLOBAL2_INT_SOURCE	0x00
+#define GLOBAL2_INT_SOURCE_WATCHDOG	15
 #define GLOBAL2_INT_MASK	0x01
 #define GLOBAL2_MGMT_EN_2X	0x02
 #define GLOBAL2_MGMT_EN_0X	0x03
@@ -382,10 +390,12 @@
 #define GLOBAL2_EEPROM_CMD_WRITE_EN	BIT(10)
 #define GLOBAL2_EEPROM_CMD_ADDR_MASK	0xff
 #define GLOBAL2_EEPROM_DATA	0x15
+#define GLOBAL2_EEPROM_ADDR	0x15 /* 6390, 6341 */
 #define GLOBAL2_PTP_AVB_OP	0x16
 #define GLOBAL2_PTP_AVB_DATA	0x17
 #define GLOBAL2_SMI_PHY_CMD			0x18
 #define GLOBAL2_SMI_PHY_CMD_BUSY		BIT(15)
+#define GLOBAL2_SMI_PHY_CMD_EXTERNAL		BIT(13)
 #define GLOBAL2_SMI_PHY_CMD_MODE_22		BIT(12)
 #define GLOBAL2_SMI_PHY_CMD_OP_22_WRITE_DATA	((0x1 << 10) | \
 						 GLOBAL2_SMI_PHY_CMD_MODE_22 | \
@@ -393,12 +403,38 @@
 #define GLOBAL2_SMI_PHY_CMD_OP_22_READ_DATA	((0x2 << 10) | \
 						 GLOBAL2_SMI_PHY_CMD_MODE_22 | \
 						 GLOBAL2_SMI_PHY_CMD_BUSY)
+#define GLOBAL2_SMI_PHY_CMD_OP_45_WRITE_ADDR	((0x0 << 10) | \
+						 GLOBAL2_SMI_PHY_CMD_BUSY)
+#define GLOBAL2_SMI_PHY_CMD_OP_45_WRITE_DATA	((0x1 << 10) | \
+						 GLOBAL2_SMI_PHY_CMD_BUSY)
+#define GLOBAL2_SMI_PHY_CMD_OP_45_READ_DATA	((0x3 << 10) | \
+						 GLOBAL2_SMI_PHY_CMD_BUSY)
+
 #define GLOBAL2_SMI_PHY_DATA			0x19
 #define GLOBAL2_SCRATCH_MISC	0x1a
 #define GLOBAL2_SCRATCH_BUSY		BIT(15)
 #define GLOBAL2_SCRATCH_REGISTER_SHIFT	8
 #define GLOBAL2_SCRATCH_VALUE_MASK	0xff
 #define GLOBAL2_WDOG_CONTROL	0x1b
+#define GLOBAL2_WDOG_CONTROL_EGRESS_EVENT	BIT(7)
+#define GLOBAL2_WDOG_CONTROL_RMU_TIMEOUT	BIT(6)
+#define GLOBAL2_WDOG_CONTROL_QC_ENABLE		BIT(5)
+#define GLOBAL2_WDOG_CONTROL_EGRESS_HISTORY	BIT(4)
+#define GLOBAL2_WDOG_CONTROL_EGRESS_ENABLE	BIT(3)
+#define GLOBAL2_WDOG_CONTROL_FORCE_IRQ		BIT(2)
+#define GLOBAL2_WDOG_CONTROL_HISTORY		BIT(1)
+#define GLOBAL2_WDOG_CONTROL_SWRESET		BIT(0)
+#define GLOBAL2_WDOG_UPDATE			BIT(15)
+#define GLOBAL2_WDOG_INT_SOURCE			(0x00 << 8)
+#define GLOBAL2_WDOG_INT_STATUS			(0x10 << 8)
+#define GLOBAL2_WDOG_INT_ENABLE			(0x11 << 8)
+#define GLOBAL2_WDOG_EVENT			(0x12 << 8)
+#define GLOBAL2_WDOG_HISTORY			(0x13 << 8)
+#define GLOBAL2_WDOG_DATA_MASK			0xff
+#define GLOBAL2_WDOG_CUT_THROUGH		BIT(3)
+#define GLOBAL2_WDOG_QUEUE_CONTROLLER		BIT(2)
+#define GLOBAL2_WDOG_EGRESS			BIT(1)
+#define GLOBAL2_WDOG_FORCE_IRQ			BIT(0)
 #define GLOBAL2_QOS_WEIGHT	0x1c
 #define GLOBAL2_MISC		0x1d
 
@@ -418,6 +454,7 @@ enum mv88e6xxx_model {
 	MV88E6097,
 	MV88E6123,
 	MV88E6131,
+	MV88E6141,
 	MV88E6161,
 	MV88E6165,
 	MV88E6171,
@@ -432,6 +469,7 @@ enum mv88e6xxx_model {
 	MV88E6290,
 	MV88E6320,
 	MV88E6321,
+	MV88E6341,
 	MV88E6350,
 	MV88E6351,
 	MV88E6352,
@@ -447,6 +485,7 @@ enum mv88e6xxx_family {
 	MV88E6XXX_FAMILY_6165,	/* 6123 6161 6165 */
 	MV88E6XXX_FAMILY_6185,	/* 6108 6121 6122 6131 6152 6155 6182 6185 */
 	MV88E6XXX_FAMILY_6320,	/* 6320 6321 */
+	MV88E6XXX_FAMILY_6341,	/* 6141 6341 */
 	MV88E6XXX_FAMILY_6351,	/* 6171 6175 6350 6351 */
 	MV88E6XXX_FAMILY_6352,	/* 6172 6176 6240 6352 */
 	MV88E6XXX_FAMILY_6390,  /* 6190 6190X 6191 6290 6390 6390X */
@@ -496,12 +535,6 @@ enum mv88e6xxx_cap {
 	 */
 	MV88E6XXX_CAP_STU,
 
-	/* Internal temperature sensor.
-	 * Available from any enabled port's PHY register 26, page 6.
-	 */
-	MV88E6XXX_CAP_TEMP,
-	MV88E6XXX_CAP_TEMP_LIMIT,
-
 	/* VLAN Table Unit.
 	 * The VTU is used to program 802.1Q VLANs. See GLOBAL_VTU_OP.
 	 */
@@ -532,8 +565,6 @@ enum mv88e6xxx_cap {
 #define MV88E6XXX_FLAG_G2_POT		BIT_ULL(MV88E6XXX_CAP_G2_POT)
 
 #define MV88E6XXX_FLAG_STU		BIT_ULL(MV88E6XXX_CAP_STU)
-#define MV88E6XXX_FLAG_TEMP		BIT_ULL(MV88E6XXX_CAP_TEMP)
-#define MV88E6XXX_FLAG_TEMP_LIMIT	BIT_ULL(MV88E6XXX_CAP_TEMP_LIMIT)
 #define MV88E6XXX_FLAG_VTU		BIT_ULL(MV88E6XXX_CAP_VTU)
 
 /* Ingress Rate Limit unit */
@@ -566,6 +597,7 @@ enum mv88e6xxx_cap {
 	(MV88E6XXX_FLAG_G1_ATU_FID |	\
 	 MV88E6XXX_FLAG_G1_VTU_FID |	\
 	 MV88E6XXX_FLAG_GLOBAL2 |	\
+	 MV88E6XXX_FLAG_G2_INT |        \
 	 MV88E6XXX_FLAG_G2_MGMT_EN_2X |	\
 	 MV88E6XXX_FLAG_G2_MGMT_EN_0X |	\
 	 MV88E6XXX_FLAG_G2_POT |	\
@@ -584,7 +616,6 @@ enum mv88e6xxx_cap {
 	 MV88E6XXX_FLAG_G2_MGMT_EN_0X |	\
 	 MV88E6XXX_FLAG_G2_POT |	\
 	 MV88E6XXX_FLAG_STU |		\
-	 MV88E6XXX_FLAG_TEMP |		\
 	 MV88E6XXX_FLAG_VTU |		\
 	 MV88E6XXX_FLAGS_IRL |		\
 	 MV88E6XXX_FLAGS_MULTI_CHIP |	\
@@ -603,13 +634,25 @@ enum mv88e6xxx_cap {
 	 MV88E6XXX_FLAG_G2_MGMT_EN_2X |	\
 	 MV88E6XXX_FLAG_G2_MGMT_EN_0X |	\
 	 MV88E6XXX_FLAG_G2_POT |	\
-	 MV88E6XXX_FLAG_TEMP |		\
-	 MV88E6XXX_FLAG_TEMP_LIMIT |	\
 	 MV88E6XXX_FLAG_VTU |		\
 	 MV88E6XXX_FLAGS_IRL |		\
 	 MV88E6XXX_FLAGS_MULTI_CHIP |	\
 	 MV88E6XXX_FLAGS_PVT)
 
+#define MV88E6XXX_FLAGS_FAMILY_6341	\
+	(MV88E6XXX_FLAG_EEE |		\
+	 MV88E6XXX_FLAG_G1_ATU_FID |	\
+	 MV88E6XXX_FLAG_G1_VTU_FID |	\
+	 MV88E6XXX_FLAG_GLOBAL2 |	\
+	 MV88E6XXX_FLAG_G2_INT |	\
+	 MV88E6XXX_FLAG_G2_POT |	\
+	 MV88E6XXX_FLAG_STU |		\
+	 MV88E6XXX_FLAG_VTU |		\
+	 MV88E6XXX_FLAGS_IRL |		\
+	 MV88E6XXX_FLAGS_MULTI_CHIP |	\
+	 MV88E6XXX_FLAGS_PVT |		\
+	 MV88E6XXX_FLAGS_SERDES)
+
 #define MV88E6XXX_FLAGS_FAMILY_6351	\
 	(MV88E6XXX_FLAG_G1_ATU_FID |	\
 	 MV88E6XXX_FLAG_G1_VTU_FID |	\
@@ -619,7 +662,6 @@ enum mv88e6xxx_cap {
 	 MV88E6XXX_FLAG_G2_MGMT_EN_0X |	\
 	 MV88E6XXX_FLAG_G2_POT |	\
 	 MV88E6XXX_FLAG_STU |		\
-	 MV88E6XXX_FLAG_TEMP |		\
 	 MV88E6XXX_FLAG_VTU |		\
 	 MV88E6XXX_FLAGS_IRL |		\
 	 MV88E6XXX_FLAGS_MULTI_CHIP |	\
@@ -635,27 +677,24 @@ enum mv88e6xxx_cap {
 	 MV88E6XXX_FLAG_G2_MGMT_EN_0X |	\
 	 MV88E6XXX_FLAG_G2_POT |	\
 	 MV88E6XXX_FLAG_STU |		\
-	 MV88E6XXX_FLAG_TEMP |		\
-	 MV88E6XXX_FLAG_TEMP_LIMIT |	\
 	 MV88E6XXX_FLAG_VTU |		\
 	 MV88E6XXX_FLAGS_IRL |		\
 	 MV88E6XXX_FLAGS_MULTI_CHIP |	\
 	 MV88E6XXX_FLAGS_PVT |		\
 	 MV88E6XXX_FLAGS_SERDES)
 
-struct mv88e6xxx_ops;
-
 #define MV88E6XXX_FLAGS_FAMILY_6390	\
 	(MV88E6XXX_FLAG_EEE |		\
 	 MV88E6XXX_FLAG_GLOBAL2 |	\
+	 MV88E6XXX_FLAG_G2_INT |        \
 	 MV88E6XXX_FLAG_STU |		\
-	 MV88E6XXX_FLAG_TEMP |		\
-	 MV88E6XXX_FLAG_TEMP_LIMIT |	\
 	 MV88E6XXX_FLAG_VTU |		\
 	 MV88E6XXX_FLAGS_IRL |		\
 	 MV88E6XXX_FLAGS_MULTI_CHIP |	\
 	 MV88E6XXX_FLAGS_PVT)
 
+struct mv88e6xxx_ops;
+
 struct mv88e6xxx_info {
 	enum mv88e6xxx_family family;
 	u16 prod_num;
@@ -688,10 +727,7 @@ struct mv88e6xxx_vtu_entry {
 };
 
 struct mv88e6xxx_bus_ops;
-
-struct mv88e6xxx_priv_port {
-	struct net_device *bridge_dev;
-};
+struct mv88e6xxx_irq_ops;
 
 struct mv88e6xxx_irq {
 	u16 masked;
@@ -733,8 +769,6 @@ struct mv88e6xxx_chip {
 	 */
 	struct mutex	stats_mutex;
 
-	struct mv88e6xxx_priv_port	ports[DSA_MAX_PORTS];
-
 	/* A switch may have a GPIO line tied to its reset pin. Parse
 	 * this from the device tree, and use it before performing
 	 * switch soft reset.
@@ -744,11 +778,8 @@ struct mv88e6xxx_chip {
 	/* set to size of eeprom if supported by the switch */
 	int		eeprom_len;
 
-	/* Device node for the MDIO bus */
-	struct device_node *mdio_np;
-
-	/* And the MDIO bus itself */
-	struct mii_bus *mdio_bus;
+	/* List of mdio busses */
+	struct list_head mdios;
 
 	/* There can be two interrupt controllers, which are chained
 	 * off a GPIO as interrupt source
@@ -757,6 +788,7 @@ struct mv88e6xxx_chip {
 	struct mv88e6xxx_irq g2_irq;
 	int irq;
 	int device_irq;
+	int watchdog_irq;
 };
 
 struct mv88e6xxx_bus_ops {
@@ -764,6 +796,13 @@ struct mv88e6xxx_bus_ops {
 	int (*write)(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val);
 };
 
+struct mv88e6xxx_mdio_bus {
+	struct mii_bus *bus;
+	struct mv88e6xxx_chip *chip;
+	struct list_head list;
+	bool external;
+};
+
 struct mv88e6xxx_ops {
 	int (*get_eeprom)(struct mv88e6xxx_chip *chip,
 			  struct ethtool_eeprom *eeprom, u8 *data);
@@ -772,10 +811,12 @@ struct mv88e6xxx_ops {
 
 	int (*set_switch_mac)(struct mv88e6xxx_chip *chip, u8 *addr);
 
-	int (*phy_read)(struct mv88e6xxx_chip *chip, int addr, int reg,
-			u16 *val);
-	int (*phy_write)(struct mv88e6xxx_chip *chip, int addr, int reg,
-			 u16 val);
+	int (*phy_read)(struct mv88e6xxx_chip *chip,
+			struct mii_bus *bus,
+			int addr, int reg, u16 *val);
+	int (*phy_write)(struct mv88e6xxx_chip *chip,
+			 struct mii_bus *bus,
+			 int addr, int reg, u16 val);
 
 	/* PHY Polling Unit (PPU) operations */
 	int (*ppu_enable)(struct mv88e6xxx_chip *chip);
@@ -832,6 +873,18 @@ struct mv88e6xxx_ops {
 	int (*port_egress_rate_limiting)(struct mv88e6xxx_chip *chip, int port);
 	int (*port_pause_config)(struct mv88e6xxx_chip *chip, int port);
 
+	/* CMODE control what PHY mode the MAC will use, eg. SGMII, RGMII, etc.
+	 * Some chips allow this to be configured on specific ports.
+	 */
+	int (*port_set_cmode)(struct mv88e6xxx_chip *chip, int port,
+			      phy_interface_t mode);
+
+	/* Some devices have a per port register indicating what is
+	 * the upstream port this port should forward to.
+	 */
+	int (*port_set_upstream_port)(struct mv88e6xxx_chip *chip, int port,
+				      int upstream_port);
+
 	/* Snapshot the statistics for a port. The statistics can then
 	 * be read back a leisure but still with a consistent view.
 	 */
@@ -849,11 +902,21 @@ struct mv88e6xxx_ops {
 				uint64_t *data);
 	int (*g1_set_cpu_port)(struct mv88e6xxx_chip *chip, int port);
 	int (*g1_set_egress_port)(struct mv88e6xxx_chip *chip, int port);
+	const struct mv88e6xxx_irq_ops *watchdog_ops;
 
 	/* Can be either in g1 or g2, so don't use a prefix */
 	int (*mgmt_rsvd2cpu)(struct mv88e6xxx_chip *chip);
 };
 
+struct mv88e6xxx_irq_ops {
+	/* Action to be performed when the interrupt happens */
+	int (*irq_action)(struct mv88e6xxx_chip *chip, int irq);
+	/* Setup the hardware to generate the interrupt */
+	int (*irq_setup)(struct mv88e6xxx_chip *chip);
+	/* Reset the hardware to stop generating the interrupt */
+	void (*irq_free)(struct mv88e6xxx_chip *chip);
+};
+
 #define STATS_TYPE_PORT		BIT(0)
 #define STATS_TYPE_BANK0	BIT(1)
 #define STATS_TYPE_BANK1	BIT(2)