summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/hw.h
diff options
context:
space:
mode:
authorBruce Allan <bruce.w.allan@intel.com>2008-04-29 09:16:05 -0700
committerJeff Garzik <jgarzik@redhat.com>2008-05-06 12:04:14 -0400
commit97ac8caee238d2a81c23661916f7acd3a22c85fe (patch)
tree52723d8582162e862c78fecb5da2d4d13f7a9579 /drivers/net/e1000e/hw.h
parente284e5c6601cbb16e48854be26aa57a8fa844e35 (diff)
downloadlinux-97ac8caee238d2a81c23661916f7acd3a22c85fe.tar.gz
linux-97ac8caee238d2a81c23661916f7acd3a22c85fe.tar.bz2
linux-97ac8caee238d2a81c23661916f7acd3a22c85fe.zip
e1000e: Add support for BM PHYs on ICH9
This patch adds support for the BM PHY, a new PHY model being used on ICH9-based implementations. This new PHY exposes issues in the ICH9 silicon when receiving jumbo frames large enough to use more than a certain part of the Rx FIFO, and this unfortunately breaks packet split jumbo receives. For this reason we re-introduce (for affected adapters only) the jumbo single-skb receive routine back so that people who do wish to use jumbo frames on these ich9 platforms can do so. Part of this problem has to do with CPU sleep states and to make sure that all the wake up timings are correctly we force them with the recently merged pm_qos infrastructure written by Mark Gross. (See http://lkml.org/lkml/2007/10/4/400). To make code read a bit easier we introduce a _IS_ICH flag so that we don't need to do mac type checks over the code. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/e1000e/hw.h')
-rw-r--r--drivers/net/e1000e/hw.h22
1 files changed, 22 insertions, 0 deletions
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index a930e6d9cf02..74f263acb172 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -216,6 +216,21 @@ enum e1e_registers {
#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
+#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */
+#define IGP_PAGE_SHIFT 5
+#define PHY_REG_MASK 0x1F
+
+#define BM_WUC_PAGE 800
+#define BM_WUC_ADDRESS_OPCODE 0x11
+#define BM_WUC_DATA_OPCODE 0x12
+#define BM_WUC_ENABLE_PAGE 769
+#define BM_WUC_ENABLE_REG 17
+#define BM_WUC_ENABLE_BIT (1 << 2)
+#define BM_WUC_HOST_WU_BIT (1 << 4)
+
+#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
#define IGP01E1000_PHY_POLARITY_MASK 0x0078
@@ -331,10 +346,16 @@ enum e1e_registers {
#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
#define E1000_DEV_ID_ICH8_IGP_M 0x104D
#define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD
+#define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5
+#define E1000_DEV_ID_ICH9_IGP_M 0x10BF
+#define E1000_DEV_ID_ICH9_IGP_M_V 0x10CB
#define E1000_DEV_ID_ICH9_IGP_C 0x294C
#define E1000_DEV_ID_ICH9_IFE 0x10C0
#define E1000_DEV_ID_ICH9_IFE_GT 0x10C3
#define E1000_DEV_ID_ICH9_IFE_G 0x10C2
+#define E1000_DEV_ID_ICH10_R_BM_LM 0x10CC
+#define E1000_DEV_ID_ICH10_R_BM_LF 0x10CD
+#define E1000_DEV_ID_ICH10_R_BM_V 0x10CE
#define E1000_FUNC_1 1
@@ -378,6 +399,7 @@ enum e1000_phy_type {
e1000_phy_gg82563,
e1000_phy_igp_3,
e1000_phy_ife,
+ e1000_phy_bm,
};
enum e1000_bus_width {