diff options
| author | Dmitry Kravkov <dmitry@broadcom.com> | 2014-02-12 18:19:57 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2014-02-12 19:15:42 -0500 |
| commit | 3156b8eb9d85ee475de20352c07cb386a53255c2 (patch) | |
| tree | fb9d2e49c12469cd021f5f2db0139ba701cae11c /drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | |
| parent | 230bb0f33672b5fad1c485ca82789f427fc1b253 (diff) | |
| download | linux-3156b8eb9d85ee475de20352c07cb386a53255c2.tar.gz linux-3156b8eb9d85ee475de20352c07cb386a53255c2.tar.bz2 linux-3156b8eb9d85ee475de20352c07cb386a53255c2.zip | |
bnx2x: utilize FW 7.8.19
This new firmware fixes following bugs:
1. HW attention appears and traffic stops when iSCSI firmware tries to
retransmit iSCSI login command when the iSCSI login is carrying data
not aligned to 4-bytes.
2. FCoE traffic fails to run when running in switch-independent multi-function
mode and there's more than one interface supporting FCoE on a given port.
3. While two ports are running FCoE with at least one of them has a function
number (>1) on the same engine in a 4-port device a zeroed CQE is given,
causing FCoE traffic to stop.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 21fdd1b869db..722160940ab9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -26,8 +26,8 @@ * (you will need to reboot afterwards) */ /* #define BNX2X_STOP_ON_ERROR */ -#define DRV_MODULE_VERSION "1.78.17-0" -#define DRV_MODULE_RELDATE "2013/04/11" +#define DRV_MODULE_VERSION "1.78.19-0" +#define DRV_MODULE_RELDATE "2014/02/10" #define BNX2X_BC_VER 0x040200 #if defined(CONFIG_DCB) |