summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/jme.h
diff options
context:
space:
mode:
authorAries Lee <arieslee@jmicron.com>2011-11-21 10:20:42 +0000
committerDavid S. Miller <davem@davemloft.net>2011-11-27 19:21:09 -0500
commitc4860ba2e11261a541632ceee8267ca490d9eb98 (patch)
treefc18d6bd235fed7c22153961dedec01b56662fd3 /drivers/net/ethernet/jme.h
parentde68dca1816660b0d3ac89fa59ffb410007a143f (diff)
downloadlinux-c4860ba2e11261a541632ceee8267ca490d9eb98.tar.gz
linux-c4860ba2e11261a541632ceee8267ca490d9eb98.tar.bz2
linux-c4860ba2e11261a541632ceee8267ca490d9eb98.zip
jme: PHY configuration for compatible issue
To perform PHY calibration and set a different EA value by chip ID, Whenever the NIC chip power on, ie booting or resuming, we need to force HW to calibrate PHY parameter again, and also set a proper EA value which gather from experiment. Those procedures help to reduce compatible issues(NIC is unable to link up in some special case) in giga speed. Signed-off-by: AriesLee <AriesLee@jmicron.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/jme.h')
-rw-r--r--drivers/net/ethernet/jme.h19
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h
index 02ea27c1dcb5..4304072bd3c5 100644
--- a/drivers/net/ethernet/jme.h
+++ b/drivers/net/ethernet/jme.h
@@ -760,6 +760,25 @@ enum jme_rxmcs_bits {
RXMCS_CHECKSUM,
};
+/* Extern PHY common register 2 */
+
+#define PHY_GAD_TEST_MODE_1 0x00002000
+#define PHY_GAD_TEST_MODE_MSK 0x0000E000
+#define JM_PHY_SPEC_REG_READ 0x00004000
+#define JM_PHY_SPEC_REG_WRITE 0x00008000
+#define PHY_CALIBRATION_DELAY 20
+#define JM_PHY_SPEC_ADDR_REG 0x1E
+#define JM_PHY_SPEC_DATA_REG 0x1F
+
+#define JM_PHY_EXT_COMM_0_REG 0x30
+#define JM_PHY_EXT_COMM_1_REG 0x31
+#define JM_PHY_EXT_COMM_2_REG 0x32
+#define JM_PHY_EXT_COMM_2_CALI_ENABLE 0x01
+#define JM_PHY_EXT_COMM_2_CALI_MODE_0 0x02
+#define JM_PHY_EXT_COMM_2_CALI_LATCH 0x10
+#define PCI_PRIV_SHARE_NICCTRL 0xF5
+#define JME_FLAG_PHYEA_ENABLE 0x2
+
/*
* Wakeup Frame setup interface registers
*/