Merge tag 'asoc-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: More updates for v3.10

The main additional change here is Lars-Peter's DMA work plus the
platform conversions which have been tested - getting this in mainline
will make life easier for development after the merge window.  These
factor a large chunk of code out of the drivers for the platforms using
dmaengine, greatly simplifying development.

4 files changed, 43 insertions, 23 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 77ebae0ac64a..0283f343b0d1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -13437,13 +13437,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
 {
 	struct bnx2x *bp = params->bp;
 	u16 base_page, next_page, not_kr2_device, lane;
-	int sigdet = bnx2x_warpcore_get_sigdet(phy, params);
-
-	if (!sigdet) {
-		if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE))
-			bnx2x_kr2_recovery(params, vars, phy);
-		return;
-	}
+	int sigdet;
 
 	/* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
 	 * since some switches tend to reinit the AN process and clear the
@@ -13454,6 +13448,16 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
 		vars->check_kr2_recovery_cnt--;
 		return;
 	}
+
+	sigdet = bnx2x_warpcore_get_sigdet(phy, params);
+	if (!sigdet) {
+		if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
+			bnx2x_kr2_recovery(params, vars, phy);
+			DP(NETIF_MSG_LINK, "No sigdet\n");
+		}
+		return;
+	}
+
 	lane = bnx2x_get_warpcore_lane(phy, params);
 	CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
 			  MDIO_AER_BLOCK_AER_REG, lane);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index e81a747ea8ce..8e58da909f5c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -4947,7 +4947,7 @@ static void bnx2x_after_function_update(struct bnx2x *bp)
 				  q);
 	}
 
-	if (!NO_FCOE(bp)) {
+	if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) {
 		fp = &bp->fp[FCOE_IDX(bp)];
 		queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
 
@@ -13354,6 +13354,7 @@ static int bnx2x_unregister_cnic(struct net_device *dev)
 	RCU_INIT_POINTER(bp->cnic_ops, NULL);
 	mutex_unlock(&bp->cnic_mutex);
 	synchronize_rcu();
+	bp->cnic_enabled = false;
 	kfree(bp->cnic_kwq);
 	bp->cnic_kwq = NULL;
 
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index ec800b093e7e..d2bea3f07c73 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -870,7 +870,7 @@ err_unlock:
 }
 
 static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
-	void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+	int (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
 {
 	struct cb *cb;
 	unsigned long flags;
@@ -888,10 +888,13 @@ static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
 	nic->cbs_avail--;
 	cb->skb = skb;
 
+	err = cb_prepare(nic, cb, skb);
+	if (err)
+		goto err_unlock;
+
 	if (unlikely(!nic->cbs_avail))
 		err = -ENOSPC;
 
-	cb_prepare(nic, cb, skb);
 
 	/* Order is important otherwise we'll be in a race with h/w:
 	 * set S-bit in current first, then clear S-bit in previous. */
@@ -1091,7 +1094,7 @@ static void e100_get_defaults(struct nic *nic)
 	nic->mii.mdio_write = mdio_write;
 }
 
-static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+static int e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 	struct config *config = &cb->u.config;
 	u8 *c = (u8 *)config;
@@ -1181,6 +1184,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 	netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
 		     "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
 		     c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+	return 0;
 }
 
 /*************************************************************************
@@ -1331,7 +1335,7 @@ static const struct firmware *e100_request_firmware(struct nic *nic)
 	return fw;
 }
 
-static void e100_setup_ucode(struct nic *nic, struct cb *cb,
+static int e100_setup_ucode(struct nic *nic, struct cb *cb,
 			     struct sk_buff *skb)
 {
 	const struct firmware *fw = (void *)skb;
@@ -1358,6 +1362,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb,
 	cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
 
 	cb->command = cpu_to_le16(cb_ucode | cb_el);
+	return 0;
 }
 
 static inline int e100_load_ucode_wait(struct nic *nic)
@@ -1400,18 +1405,20 @@ static inline int e100_load_ucode_wait(struct nic *nic)
 	return err;
 }
 
-static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
+static int e100_setup_iaaddr(struct nic *nic, struct cb *cb,
 	struct sk_buff *skb)
 {
 	cb->command = cpu_to_le16(cb_iaaddr);
 	memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
+	return 0;
 }
 
-static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+static int e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 	cb->command = cpu_to_le16(cb_dump);
 	cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
 		offsetof(struct mem, dump_buf));
+	return 0;
 }
 
 static int e100_phy_check_without_mii(struct nic *nic)
@@ -1581,7 +1588,7 @@ static int e100_hw_init(struct nic *nic)
 	return 0;
 }
 
-static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+static int e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 	struct net_device *netdev = nic->netdev;
 	struct netdev_hw_addr *ha;
@@ -1596,6 +1603,7 @@ static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr,
 			ETH_ALEN);
 	}
+	return 0;
 }
 
 static void e100_set_multicast_list(struct net_device *netdev)
@@ -1756,11 +1764,18 @@ static void e100_watchdog(unsigned long data)
 		  round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
 }
 
-static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+static int e100_xmit_prepare(struct nic *nic, struct cb *cb,
 	struct sk_buff *skb)
 {
+	dma_addr_t dma_addr;
 	cb->command = nic->tx_command;
 
+	dma_addr = pci_map_single(nic->pdev,
+				  skb->data, skb->len, PCI_DMA_TODEVICE);
+	/* If we can't map the skb, have the upper layer try later */
+	if (pci_dma_mapping_error(nic->pdev, dma_addr))
+		return -ENOMEM;
+
 	/*
 	 * Use the last 4 bytes of the SKB payload packet as the CRC, used for
 	 * testing, ie sending frames with bad CRC.
@@ -1777,11 +1792,10 @@ static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
 	cb->u.tcb.tcb_byte_count = 0;
 	cb->u.tcb.threshold = nic->tx_threshold;
 	cb->u.tcb.tbd_count = 1;
-	cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
-		skb->data, skb->len, PCI_DMA_TODEVICE));
-	/* check for mapping failure? */
+	cb->u.tcb.tbd.buf_addr = cpu_to_le32(dma_addr);
 	cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
 	skb_tx_timestamp(skb);
+	return 0;
 }
 
 static netdev_tx_t e100_xmit_frame(struct sk_buff *skb,
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index cd345b8969bc..1e628ce57201 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2771,16 +2771,17 @@ static int mvneta_probe(struct platform_device *pdev)
 
 	netif_napi_add(dev, &pp->napi, mvneta_poll, pp->weight);
 
+	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+	dev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+	dev->vlan_features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+	dev->priv_flags |= IFF_UNICAST_FLT;
+
 	err = register_netdev(dev);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to register\n");
 		goto err_deinit;
 	}
 
-	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
-	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM;
-	dev->priv_flags |= IFF_UNICAST_FLT;
-
 	netdev_info(dev, "mac: %pM\n", dev->dev_addr);
 
 	platform_set_drvdata(pdev, pp->dev);