Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 298 insertions, 0 deletions

diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c
new file mode 100644
index 000000000000..14213f090e91
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_phy.c
@@ -0,0 +1,298 @@
+/*
+ * ibm_ocp_phy.c
+ *
+ * PHY drivers for the ibm ocp ethernet driver. Borrowed
+ * from sungem_phy.c, though I only kept the generic MII
+ * driver for now.
+ * 
+ * This file should be shared with other drivers or eventually
+ * merged as the "low level" part of miilib
+ * 
+ * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ *
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+
+#include "ibm_emac_phy.h"
+
+static int reset_one_mii_phy(struct mii_phy *phy, int phy_id)
+{
+	u16 val;
+	int limit = 10000;
+
+	val = __phy_read(phy, phy_id, MII_BMCR);
+	val &= ~BMCR_ISOLATE;
+	val |= BMCR_RESET;
+	__phy_write(phy, phy_id, MII_BMCR, val);
+
+	udelay(100);
+
+	while (limit--) {
+		val = __phy_read(phy, phy_id, MII_BMCR);
+		if ((val & BMCR_RESET) == 0)
+			break;
+		udelay(10);
+	}
+	if ((val & BMCR_ISOLATE) && limit > 0)
+		__phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
+
+	return (limit <= 0);
+}
+
+static int cis8201_init(struct mii_phy *phy)
+{
+	u16 epcr;
+
+	epcr = phy_read(phy, MII_CIS8201_EPCR);
+	epcr &= ~EPCR_MODE_MASK;
+
+	switch (phy->mode) {
+	case PHY_MODE_TBI:
+		epcr |= EPCR_TBI_MODE;
+		break;
+	case PHY_MODE_RTBI:
+		epcr |= EPCR_RTBI_MODE;
+		break;
+	case PHY_MODE_GMII:
+		epcr |= EPCR_GMII_MODE;
+		break;
+	case PHY_MODE_RGMII:
+	default:
+		epcr |= EPCR_RGMII_MODE;
+	}
+
+	phy_write(phy, MII_CIS8201_EPCR, epcr);
+
+	return 0;
+}
+
+static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+	u16 ctl, adv;
+
+	phy->autoneg = 1;
+	phy->speed = SPEED_10;
+	phy->duplex = DUPLEX_HALF;
+	phy->pause = 0;
+	phy->advertising = advertise;
+
+	/* Setup standard advertise */
+	adv = phy_read(phy, MII_ADVERTISE);
+	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+	if (advertise & ADVERTISED_10baseT_Half)
+		adv |= ADVERTISE_10HALF;
+	if (advertise & ADVERTISED_10baseT_Full)
+		adv |= ADVERTISE_10FULL;
+	if (advertise & ADVERTISED_100baseT_Half)
+		adv |= ADVERTISE_100HALF;
+	if (advertise & ADVERTISED_100baseT_Full)
+		adv |= ADVERTISE_100FULL;
+	phy_write(phy, MII_ADVERTISE, adv);
+
+	/* Start/Restart aneg */
+	ctl = phy_read(phy, MII_BMCR);
+	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+	phy_write(phy, MII_BMCR, ctl);
+
+	return 0;
+}
+
+static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+	u16 ctl;
+
+	phy->autoneg = 0;
+	phy->speed = speed;
+	phy->duplex = fd;
+	phy->pause = 0;
+
+	ctl = phy_read(phy, MII_BMCR);
+	ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
+
+	/* First reset the PHY */
+	phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+	/* Select speed & duplex */
+	switch (speed) {
+	case SPEED_10:
+		break;
+	case SPEED_100:
+		ctl |= BMCR_SPEED100;
+		break;
+	case SPEED_1000:
+	default:
+		return -EINVAL;
+	}
+	if (fd == DUPLEX_FULL)
+		ctl |= BMCR_FULLDPLX;
+	phy_write(phy, MII_BMCR, ctl);
+
+	return 0;
+}
+
+static int genmii_poll_link(struct mii_phy *phy)
+{
+	u16 status;
+
+	(void)phy_read(phy, MII_BMSR);
+	status = phy_read(phy, MII_BMSR);
+	if ((status & BMSR_LSTATUS) == 0)
+		return 0;
+	if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
+		return 0;
+	return 1;
+}
+
+#define	MII_CIS8201_ACSR	0x1c
+#define  ACSR_DUPLEX_STATUS	0x0020
+#define  ACSR_SPEED_1000BASET	0x0010
+#define  ACSR_SPEED_100BASET	0x0008
+
+static int cis8201_read_link(struct mii_phy *phy)
+{
+	u16 acsr;
+
+	if (phy->autoneg) {
+		acsr = phy_read(phy, MII_CIS8201_ACSR);
+
+		if (acsr & ACSR_DUPLEX_STATUS)
+			phy->duplex = DUPLEX_FULL;
+		else
+			phy->duplex = DUPLEX_HALF;
+		if (acsr & ACSR_SPEED_1000BASET) {
+			phy->speed = SPEED_1000;
+		} else if (acsr & ACSR_SPEED_100BASET)
+			phy->speed = SPEED_100;
+		else
+			phy->speed = SPEED_10;
+		phy->pause = 0;
+	}
+	/* On non-aneg, we assume what we put in BMCR is the speed,
+	 * though magic-aneg shouldn't prevent this case from occurring
+	 */
+
+	return 0;
+}
+
+static int genmii_read_link(struct mii_phy *phy)
+{
+	u16 lpa;
+
+	if (phy->autoneg) {
+		lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
+
+		phy->speed = SPEED_10;
+		phy->duplex = DUPLEX_HALF;
+		phy->pause = 0;
+
+		if (lpa & (LPA_100FULL | LPA_100HALF)) {
+			phy->speed = SPEED_100;
+			if (lpa & LPA_100FULL)
+				phy->duplex = DUPLEX_FULL;
+		} else if (lpa & LPA_10FULL)
+			phy->duplex = DUPLEX_FULL;
+	}
+	/* On non-aneg, we assume what we put in BMCR is the speed,
+	 * though magic-aneg shouldn't prevent this case from occurring
+	 */
+
+	return 0;
+}
+
+#define MII_BASIC_FEATURES	(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
+				 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
+				 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
+#define MII_GBIT_FEATURES	(MII_BASIC_FEATURES | \
+				 SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
+
+/* CIS8201 phy ops */
+static struct mii_phy_ops cis8201_phy_ops = {
+	init:cis8201_init,
+	setup_aneg:genmii_setup_aneg,
+	setup_forced:genmii_setup_forced,
+	poll_link:genmii_poll_link,
+	read_link:cis8201_read_link
+};
+
+/* Generic implementation for most 10/100 PHYs */
+static struct mii_phy_ops generic_phy_ops = {
+	setup_aneg:genmii_setup_aneg,
+	setup_forced:genmii_setup_forced,
+	poll_link:genmii_poll_link,
+	read_link:genmii_read_link
+};
+
+static struct mii_phy_def cis8201_phy_def = {
+	phy_id:0x000fc410,
+	phy_id_mask:0x000ffff0,
+	name:"CIS8201 Gigabit Ethernet",
+	features:MII_GBIT_FEATURES,
+	magic_aneg:0,
+	ops:&cis8201_phy_ops
+};
+
+static struct mii_phy_def genmii_phy_def = {
+	phy_id:0x00000000,
+	phy_id_mask:0x00000000,
+	name:"Generic MII",
+	features:MII_BASIC_FEATURES,
+	magic_aneg:0,
+	ops:&generic_phy_ops
+};
+
+static struct mii_phy_def *mii_phy_table[] = {
+	&cis8201_phy_def,
+	&genmii_phy_def,
+	NULL
+};
+
+int mii_phy_probe(struct mii_phy *phy, int mii_id)
+{
+	int rc;
+	u32 id;
+	struct mii_phy_def *def;
+	int i;
+
+	phy->autoneg = 0;
+	phy->advertising = 0;
+	phy->mii_id = mii_id;
+	phy->speed = 0;
+	phy->duplex = 0;
+	phy->pause = 0;
+
+	/* Take PHY out of isloate mode and reset it. */
+	rc = reset_one_mii_phy(phy, mii_id);
+	if (rc)
+		return -ENODEV;
+
+	/* Read ID and find matching entry */
+	id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2))
+	    & 0xfffffff0;
+	for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
+		if ((id & def->phy_id_mask) == def->phy_id)
+			break;
+	/* Should never be NULL (we have a generic entry), but... */
+	if (def == NULL)
+		return -ENODEV;
+
+	phy->def = def;
+
+	/* Setup default advertising */
+	phy->advertising = def->features;
+
+	return 0;
+}
+
+MODULE_LICENSE("GPL");