diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/irda/nsc-ircc.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/irda/nsc-ircc.c')
-rw-r--r-- | drivers/net/irda/nsc-ircc.c | 2222 |
1 files changed, 2222 insertions, 0 deletions
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c new file mode 100644 index 000000000000..805714ec9a8a --- /dev/null +++ b/drivers/net/irda/nsc-ircc.c @@ -0,0 +1,2222 @@ +/********************************************************************* + * + * Filename: nsc-ircc.c + * Version: 1.0 + * Description: Driver for the NSC PC'108 and PC'338 IrDA chipsets + * Status: Stable. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sat Nov 7 21:43:15 1998 + * Modified at: Wed Mar 1 11:29:34 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no> + * Copyright (c) 1998 Lichen Wang, <lwang@actisys.com> + * Copyright (c) 1998 Actisys Corp., www.actisys.com + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsų admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + * Notice that all functions that needs to access the chip in _any_ + * way, must save BSR register on entry, and restore it on exit. + * It is _very_ important to follow this policy! + * + * __u8 bank; + * + * bank = inb(iobase+BSR); + * + * do_your_stuff_here(); + * + * outb(bank, iobase+BSR); + * + * If you find bugs in this file, its very likely that the same bug + * will also be in w83977af_ir.c since the implementations are quite + * similar. + * + ********************************************************************/ + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/rtnetlink.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/byteorder.h> + +#include <linux/pm.h> + +#include <net/irda/wrapper.h> +#include <net/irda/irda.h> +#include <net/irda/irda_device.h> + +#include "nsc-ircc.h" + +#define CHIP_IO_EXTENT 8 +#define BROKEN_DONGLE_ID + +static char *driver_name = "nsc-ircc"; + +/* Module parameters */ +static int qos_mtt_bits = 0x07; /* 1 ms or more */ +static int dongle_id; + +/* Use BIOS settions by default, but user may supply module parameters */ +static unsigned int io[] = { ~0, ~0, ~0, ~0 }; +static unsigned int irq[] = { 0, 0, 0, 0, 0 }; +static unsigned int dma[] = { 0, 0, 0, 0, 0 }; + +static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info); +static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info); +static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info); +static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info); +static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info); +static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info); + +/* These are the known NSC chips */ +static nsc_chip_t chips[] = { +/* Name, {cfg registers}, chip id index reg, chip id expected value, revision mask */ + { "PC87108", { 0x150, 0x398, 0xea }, 0x05, 0x10, 0xf0, + nsc_ircc_probe_108, nsc_ircc_init_108 }, + { "PC87338", { 0x398, 0x15c, 0x2e }, 0x08, 0xb0, 0xf8, + nsc_ircc_probe_338, nsc_ircc_init_338 }, + /* Contributed by Steffen Pingel - IBM X40 */ + { "PC8738x", { 0x164e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff, + nsc_ircc_probe_39x, nsc_ircc_init_39x }, + /* Contributed by Jan Frey - IBM A30/A31 */ + { "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff, + nsc_ircc_probe_39x, nsc_ircc_init_39x }, + { NULL } +}; + +/* Max 4 instances for now */ +static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL }; + +static char *dongle_types[] = { + "Differential serial interface", + "Differential serial interface", + "Reserved", + "Reserved", + "Sharp RY5HD01", + "Reserved", + "Single-ended serial interface", + "Consumer-IR only", + "HP HSDL-2300, HP HSDL-3600/HSDL-3610", + "IBM31T1100 or Temic TFDS6000/TFDS6500", + "Reserved", + "Reserved", + "HP HSDL-1100/HSDL-2100", + "HP HSDL-1100/HSDL-2100", + "Supports SIR Mode only", + "No dongle connected", +}; + +/* Some prototypes */ +static int nsc_ircc_open(int i, chipio_t *info); +static int nsc_ircc_close(struct nsc_ircc_cb *self); +static int nsc_ircc_setup(chipio_t *info); +static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self); +static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self); +static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase); +static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev); +static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev); +static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size); +static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase); +static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 baud); +static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self); +static int nsc_ircc_read_dongle_id (int iobase); +static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id); + +static int nsc_ircc_net_open(struct net_device *dev); +static int nsc_ircc_net_close(struct net_device *dev); +static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev); +static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data); + +/* + * Function nsc_ircc_init () + * + * Initialize chip. Just try to find out how many chips we are dealing with + * and where they are + */ +static int __init nsc_ircc_init(void) +{ + chipio_t info; + nsc_chip_t *chip; + int ret = -ENODEV; + int cfg_base; + int cfg, id; + int reg; + int i = 0; + + /* Probe for all the NSC chipsets we know about */ + for (chip=chips; chip->name ; chip++) { + IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, + chip->name); + + /* Try all config registers for this chip */ + for (cfg=0; cfg<3; cfg++) { + cfg_base = chip->cfg[cfg]; + if (!cfg_base) + continue; + + memset(&info, 0, sizeof(chipio_t)); + info.cfg_base = cfg_base; + info.fir_base = io[i]; + info.dma = dma[i]; + info.irq = irq[i]; + + /* Read index register */ + reg = inb(cfg_base); + if (reg == 0xff) { + IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base); + continue; + } + + /* Read chip identification register */ + outb(chip->cid_index, cfg_base); + id = inb(cfg_base+1); + if ((id & chip->cid_mask) == chip->cid_value) { + IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n", + __FUNCTION__, chip->name, id & ~chip->cid_mask); + /* + * If the user supplies the base address, then + * we init the chip, if not we probe the values + * set by the BIOS + */ + if (io[i] < 0x2000) { + chip->init(chip, &info); + } else + chip->probe(chip, &info); + + if (nsc_ircc_open(i, &info) == 0) + ret = 0; + i++; + } else { + IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id); + } + } + + } + + return ret; +} + +/* + * Function nsc_ircc_cleanup () + * + * Close all configured chips + * + */ +static void __exit nsc_ircc_cleanup(void) +{ + int i; + + pm_unregister_all(nsc_ircc_pmproc); + + for (i=0; i < 4; i++) { + if (dev_self[i]) + nsc_ircc_close(dev_self[i]); + } +} + +/* + * Function nsc_ircc_open (iobase, irq) + * + * Open driver instance + * + */ +static int __init nsc_ircc_open(int i, chipio_t *info) +{ + struct net_device *dev; + struct nsc_ircc_cb *self; + struct pm_dev *pmdev; + void *ret; + int err; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name, + info->cfg_base); + + if ((nsc_ircc_setup(info)) == -1) + return -1; + + IRDA_MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name); + + dev = alloc_irdadev(sizeof(struct nsc_ircc_cb)); + if (dev == NULL) { + IRDA_ERROR("%s(), can't allocate memory for " + "control block!\n", __FUNCTION__); + return -ENOMEM; + } + + self = dev->priv; + self->netdev = dev; + spin_lock_init(&self->lock); + + /* Need to store self somewhere */ + dev_self[i] = self; + self->index = i; + + /* Initialize IO */ + self->io.cfg_base = info->cfg_base; + self->io.fir_base = info->fir_base; + self->io.irq = info->irq; + self->io.fir_ext = CHIP_IO_EXTENT; + self->io.dma = info->dma; + self->io.fifo_size = 32; + + /* Reserve the ioports that we need */ + ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name); + if (!ret) { + IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", + __FUNCTION__, self->io.fir_base); + err = -ENODEV; + goto out1; + } + + /* Initialize QoS for this device */ + irda_init_max_qos_capabilies(&self->qos); + + /* The only value we must override it the baudrate */ + self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| + IR_115200|IR_576000|IR_1152000 |(IR_4000000 << 8); + + self->qos.min_turn_time.bits = qos_mtt_bits; + irda_qos_bits_to_value(&self->qos); + + /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ + self->rx_buff.truesize = 14384; + self->tx_buff.truesize = 14384; + + /* Allocate memory if needed */ + self->rx_buff.head = + dma_alloc_coherent(NULL, self->rx_buff.truesize, + &self->rx_buff_dma, GFP_KERNEL); + if (self->rx_buff.head == NULL) { + err = -ENOMEM; + goto out2; + + } + memset(self->rx_buff.head, 0, self->rx_buff.truesize); + + self->tx_buff.head = + dma_alloc_coherent(NULL, self->tx_buff.truesize, + &self->tx_buff_dma, GFP_KERNEL); + if (self->tx_buff.head == NULL) { + err = -ENOMEM; + goto out3; + } + memset(self->tx_buff.head, 0, self->tx_buff.truesize); + + self->rx_buff.in_frame = FALSE; + self->rx_buff.state = OUTSIDE_FRAME; + self->tx_buff.data = self->tx_buff.head; + self->rx_buff.data = self->rx_buff.head; + + /* Reset Tx queue info */ + self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; + self->tx_fifo.tail = self->tx_buff.head; + + /* Override the network functions we need to use */ + SET_MODULE_OWNER(dev); + dev->hard_start_xmit = nsc_ircc_hard_xmit_sir; + dev->open = nsc_ircc_net_open; + dev->stop = nsc_ircc_net_close; + dev->do_ioctl = nsc_ircc_net_ioctl; + dev->get_stats = nsc_ircc_net_get_stats; + + err = register_netdev(dev); + if (err) { + IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__); + goto out4; + } + IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); + + /* Check if user has supplied a valid dongle id or not */ + if ((dongle_id <= 0) || + (dongle_id >= (sizeof(dongle_types) / sizeof(dongle_types[0]))) ) { + dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base); + + IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name, + dongle_types[dongle_id]); + } else { + IRDA_MESSAGE("%s, Using dongle: %s\n", driver_name, + dongle_types[dongle_id]); + } + + self->io.dongle_id = dongle_id; + nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id); + + pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, nsc_ircc_pmproc); + if (pmdev) + pmdev->data = self; + + return 0; + out4: + dma_free_coherent(NULL, self->tx_buff.truesize, + self->tx_buff.head, self->tx_buff_dma); + out3: + dma_free_coherent(NULL, self->rx_buff.truesize, + self->rx_buff.head, self->rx_buff_dma); + out2: + release_region(self->io.fir_base, self->io.fir_ext); + out1: + free_netdev(dev); + dev_self[i] = NULL; + return err; +} + +/* + * Function nsc_ircc_close (self) + * + * Close driver instance + * + */ +static int __exit nsc_ircc_close(struct nsc_ircc_cb *self) +{ + int iobase; + + IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + + IRDA_ASSERT(self != NULL, return -1;); + + iobase = self->io.fir_base; + + /* Remove netdevice */ + unregister_netdev(self->netdev); + + /* Release the PORT that this driver is using */ + IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", + __FUNCTION__, self->io.fir_base); + release_region(self->io.fir_base, self->io.fir_ext); + + if (self->tx_buff.head) + dma_free_coherent(NULL, self->tx_buff.truesize, + self->tx_buff.head, self->tx_buff_dma); + + if (self->rx_buff.head) + dma_free_coherent(NULL, self->rx_buff.truesize, + self->rx_buff.head, self->rx_buff_dma); + + dev_self[self->index] = NULL; + free_netdev(self->netdev); + + return 0; +} + +/* + * Function nsc_ircc_init_108 (iobase, cfg_base, irq, dma) + * + * Initialize the NSC '108 chip + * + */ +static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info) +{ + int cfg_base = info->cfg_base; + __u8 temp=0; + + outb(2, cfg_base); /* Mode Control Register (MCTL) */ + outb(0x00, cfg_base+1); /* Disable device */ + + /* Base Address and Interrupt Control Register (BAIC) */ + outb(CFG_108_BAIC, cfg_base); + switch (info->fir_base) { + case 0x3e8: outb(0x14, cfg_base+1); break; + case 0x2e8: outb(0x15, cfg_base+1); break; + case 0x3f8: outb(0x16, cfg_base+1); break; + case 0x2f8: outb(0x17, cfg_base+1); break; + default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__); + } + + /* Control Signal Routing Register (CSRT) */ + switch (info->irq) { + case 3: temp = 0x01; break; + case 4: temp = 0x02; break; + case 5: temp = 0x03; break; + case 7: temp = 0x04; break; + case 9: temp = 0x05; break; + case 11: temp = 0x06; break; + case 15: temp = 0x07; break; + default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__); + } + outb(CFG_108_CSRT, cfg_base); + + switch (info->dma) { + case 0: outb(0x08+temp, cfg_base+1); break; + case 1: outb(0x10+temp, cfg_base+1); break; + case 3: outb(0x18+temp, cfg_base+1); break; + default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__); + } + + outb(CFG_108_MCTL, cfg_base); /* Mode Control Register (MCTL) */ + outb(0x03, cfg_base+1); /* Enable device */ + + return 0; +} + +/* + * Function nsc_ircc_probe_108 (chip, info) + * + * + * + */ +static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) +{ + int cfg_base = info->cfg_base; + int reg; + + /* Read address and interrupt control register (BAIC) */ + outb(CFG_108_BAIC, cfg_base); + reg = inb(cfg_base+1); + + switch (reg & 0x03) { + case 0: + info->fir_base = 0x3e8; + break; + case 1: + info->fir_base = 0x2e8; + break; + case 2: + info->fir_base = 0x3f8; + break; + case 3: + info->fir_base = 0x2f8; + break; + } + info->sir_base = info->fir_base; + IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, + info->fir_base); + + /* Read control signals routing register (CSRT) */ + outb(CFG_108_CSRT, cfg_base); + reg = inb(cfg_base+1); + + switch (reg & 0x07) { + case 0: + info->irq = -1; + break; + case 1: + info->irq = 3; + break; + case 2: + info->irq = 4; + break; + case 3: + info->irq = 5; + break; + case 4: + info->irq = 7; + break; + case 5: + info->irq = 9; + break; + case 6: + info->irq = 11; + break; + case 7: + info->irq = 15; + break; + } + IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq); + + /* Currently we only read Rx DMA but it will also be used for Tx */ + switch ((reg >> 3) & 0x03) { + case 0: + info->dma = -1; + break; + case 1: + info->dma = 0; + break; + case 2: + info->dma = 1; + break; + case 3: + info->dma = 3; + break; + } + IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma); + + /* Read mode control register (MCTL) */ + outb(CFG_108_MCTL, cfg_base); + reg = inb(cfg_base+1); + + info->enabled = reg & 0x01; + info->suspended = !((reg >> 1) & 0x01); + + return 0; +} + +/* + * Function nsc_ircc_init_338 (chip, info) + * + * Initialize the NSC '338 chip. Remember that the 87338 needs two + * consecutive writes to the data registers while CPU interrupts are + * disabled. The 97338 does not require this, but shouldn't be any + * harm if we do it anyway. + */ +static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info) +{ + /* No init yet */ + + return 0; +} + +/* + * Function nsc_ircc_probe_338 (chip, info) + * + * + * + */ +static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info) +{ + int cfg_base = info->cfg_base; + int reg, com = 0; + int pnp; + + /* Read funtion enable register (FER) */ + outb(CFG_338_FER, cfg_base); + reg = inb(cfg_base+1); + + info->enabled = (reg >> 2) & 0x01; + + /* Check if we are in Legacy or PnP mode */ + outb(CFG_338_PNP0, cfg_base); + reg = inb(cfg_base+1); + + pnp = (reg >> 3) & 0x01; + if (pnp) { + IRDA_DEBUG(2, "(), Chip is in PnP mode\n"); + outb(0x46, cfg_base); + reg = (inb(cfg_base+1) & 0xfe) << 2; + + outb(0x47, cfg_base); + reg |= ((inb(cfg_base+1) & 0xfc) << 8); + + info->fir_base = reg; + } else { + /* Read function address register (FAR) */ + outb(CFG_338_FAR, cfg_base); + reg = inb(cfg_base+1); + + switch ((reg >> 4) & 0x03) { + case 0: + info->fir_base = 0x3f8; + break; + case 1: + info->fir_base = 0x2f8; + break; + case 2: + com = 3; + break; + case 3: + com = 4; + break; + } + + if (com) { + switch ((reg >> 6) & 0x03) { + case 0: + if (com == 3) + info->fir_base = 0x3e8; + else + info->fir_base = 0x2e8; + break; + case 1: + if (com == 3) + info->fir_base = 0x338; + else + info->fir_base = 0x238; + break; + case 2: + if (com == 3) + info->fir_base = 0x2e8; + else + info->fir_base = 0x2e0; + break; + case 3: + if (com == 3) + info->fir_base = 0x220; + else + info->fir_base = 0x228; + break; + } + } + } + info->sir_base = info->fir_base; + + /* Read PnP register 1 (PNP1) */ + outb(CFG_338_PNP1, cfg_base); + reg = inb(cfg_base+1); + + info->irq = reg >> 4; + + /* Read PnP register 3 (PNP3) */ + outb(CFG_338_PNP3, cfg_base); + reg = inb(cfg_base+1); + + info->dma = (reg & 0x07) - 1; + + /* Read power and test register (PTR) */ + outb(CFG_338_PTR, cfg_base); + reg = inb(cfg_base+1); + + info->suspended = reg & 0x01; + + return 0; +} + + +/* + * Function nsc_ircc_init_39x (chip, info) + * + * Now that we know it's a '39x (see probe below), we need to + * configure it so we can use it. + * + * The NSC '338 chip is a Super I/O chip with a "bank" architecture, + * the configuration of the different functionality (serial, parallel, + * floppy...) are each in a different bank (Logical Device Number). + * The base address, irq and dma configuration registers are common + * to all functionalities (index 0x30 to 0x7F). + * There is only one configuration register specific to the + * serial port, CFG_39X_SPC. + * JeanII + * + * Note : this code was written by Jan Frey <janfrey@web.de> + */ +static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info) +{ + int cfg_base = info->cfg_base; + int enabled; + + /* User is shure about his config... accept it. */ + IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): " + "io=0x%04x, irq=%d, dma=%d\n", + __FUNCTION__, info->fir_base, info->irq, info->dma); + + /* Access bank for SP2 */ + outb(CFG_39X_LDN, cfg_base); + outb(0x02, cfg_base+1); + + /* Configure SP2 */ + + /* We want to enable the device if not enabled */ + outb(CFG_39X_ACT, cfg_base); + enabled = inb(cfg_base+1) & 0x01; + + if (!enabled) { + /* Enable the device */ + outb(CFG_39X_SIOCF1, cfg_base); + outb(0x01, cfg_base+1); + /* May want to update info->enabled. Jean II */ + } + + /* Enable UART bank switching (bit 7) ; Sets the chip to normal + * power mode (wake up from sleep mode) (bit 1) */ + outb(CFG_39X_SPC, cfg_base); + outb(0x82, cfg_base+1); + + return 0; +} + +/* + * Function nsc_ircc_probe_39x (chip, info) + * + * Test if we really have a '39x chip at the given address + * + * Note : this code was written by Jan Frey <janfrey@web.de> + */ +static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info) +{ + int cfg_base = info->cfg_base; + int reg1, reg2, irq, irqt, dma1, dma2; + int enabled, susp; + + IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n", + __FUNCTION__, cfg_base); + + /* This function should be executed with irq off to avoid + * another driver messing with the Super I/O bank - Jean II */ + + /* Access bank for SP2 */ + outb(CFG_39X_LDN, cfg_base); + outb(0x02, cfg_base+1); + + /* Read infos about SP2 ; store in info struct */ + outb(CFG_39X_BASEH, cfg_base); + reg1 = inb(cfg_base+1); + outb(CFG_39X_BASEL, cfg_base); + reg2 = inb(cfg_base+1); + info->fir_base = (reg1 << 8) | reg2; + + outb(CFG_39X_IRQNUM, cfg_base); + irq = inb(cfg_base+1); + outb(CFG_39X_IRQSEL, cfg_base); + irqt = inb(cfg_base+1); + info->irq = irq; + + outb(CFG_39X_DMA0, cfg_base); + dma1 = inb(cfg_base+1); + outb(CFG_39X_DMA1, cfg_base); + dma2 = inb(cfg_base+1); + info->dma = dma1 -1; + + outb(CFG_39X_ACT, cfg_base); + info->enabled = enabled = inb(cfg_base+1) & 0x01; + + outb(CFG_39X_SPC, cfg_base); + susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1); + + IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp); + + /* Configure SP2 */ + + /* We want to enable the device if not enabled */ + outb(CFG_39X_ACT, cfg_base); + enabled = inb(cfg_base+1) & 0x01; + + if (!enabled) { + /* Enable the device */ + outb(CFG_39X_SIOCF1, cfg_base); + outb(0x01, cfg_base+1); + /* May want to update info->enabled. Jean II */ + } + + /* Enable UART bank switching (bit 7) ; Sets the chip to normal + * power mode (wake up from sleep mode) (bit 1) */ + outb(CFG_39X_SPC, cfg_base); + outb(0x82, cfg_base+1); + + return 0; +} + +/* + * Function nsc_ircc_setup (info) + * + * Returns non-negative on success. + * + */ +static int nsc_ircc_setup(chipio_t *info) +{ + int version; + int iobase = info->fir_base; + + /* Read the Module ID */ + switch_bank(iobase, BANK3); + version = inb(iobase+MID); + + IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n", + __FUNCTION__, driver_name, version); + + /* Should be 0x2? */ + if (0x20 != (version & 0xf0)) { + IRDA_ERROR("%s, Wrong chip version %02x\n", + driver_name, version); + return -1; + } + + /* Switch to advanced mode */ + switch_bank(iobase, BANK2); + outb(ECR1_EXT_SL, iobase+ECR1); + switch_bank(iobase, BANK0); + + /* Set FIFO threshold to TX17, RX16, reset and enable FIFO's */ + switch_bank(iobase, BANK0); + outb(FCR_RXTH|FCR_TXTH|FCR_TXSR|FCR_RXSR|FCR_FIFO_EN, iobase+FCR); + + outb(0x03, iobase+LCR); /* 8 bit word length */ + outb(MCR_SIR, iobase+MCR); /* Start at SIR-mode, also clears LSR*/ + + /* Set FIFO size to 32 */ + switch_bank(iobase, BANK2); + outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2); + + /* IRCR2: FEND_MD is not set */ + switch_bank(iobase, BANK5); + outb(0x02, iobase+4); + + /* Make sure that some defaults are OK */ + switch_bank(iobase, BANK6); + outb(0x20, iobase+0); /* Set 32 bits FIR CRC */ + outb(0x0a, iobase+1); /* Set MIR pulse width */ + outb(0x0d, iobase+2); /* Set SIR pulse width to 1.6us */ + outb(0x2a, iobase+4); /* Set beginning frag, and preamble length */ + + /* Enable receive interrupts */ + switch_bank(iobase, BANK0); + outb(IER_RXHDL_IE, iobase+IER); + + return 0; +} + +/* + * Function nsc_ircc_read_dongle_id (void) + * + * Try to read dongle indentification. This procedure needs to be executed + * once after power-on/reset. It also needs to be used whenever you suspect + * that the user may have plugged/unplugged the IrDA Dongle. + */ +static int nsc_ircc_read_dongle_id (int iobase) +{ + int dongle_id; + __u8 bank; + + bank = inb(iobase+BSR); + + /* Select Bank 7 */ + switch_bank(iobase, BANK7); + + /* IRCFG4: IRSL0_DS and IRSL21_DS are cleared */ + outb(0x00, iobase+7); + + /* ID0, 1, and 2 are pulled up/down very slowly */ + udelay(50); + + /* IRCFG1: read the ID bits */ + dongle_id = inb(iobase+4) & 0x0f; + +#ifdef BROKEN_DONGLE_ID + if (dongle_id == 0x0a) + dongle_id = 0x09; +#endif + /* Go back to bank 0 before returning */ + switch_bank(iobase, BANK0); + + outb(bank, iobase+BSR); + + return dongle_id; +} + +/* + * Function nsc_ircc_init_dongle_interface (iobase, dongle_id) + * + * This function initializes the dongle for the transceiver that is + * used. This procedure needs to be executed once after + * power-on/reset. It also needs to be used whenever you suspect that + * the dongle is changed. + */ +static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id) +{ + int bank; + + /* Save current bank */ + bank = inb(iobase+BSR); + + /* Select Bank 7 */ + switch_bank(iobase, BANK7); + + /* IRCFG4: set according to dongle_id */ + switch (dongle_id) { + case 0x00: /* same as */ + case 0x01: /* Differential serial interface */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x02: /* same as */ + case 0x03: /* Reserved */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x04: /* Sharp RY5HD01 */ + break; + case 0x05: /* Reserved, but this is what the Thinkpad reports */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x06: /* Single-ended serial interface */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x07: /* Consumer-IR only */ + IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */ + IRDA_DEBUG(0, "%s(), %s\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */ + outb(0x28, iobase+7); /* Set irsl[0-2] as output */ + break; + case 0x0A: /* same as */ + case 0x0B: /* Reserved */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x0C: /* same as */ + case 0x0D: /* HP HSDL-1100/HSDL-2100 */ + /* + * Set irsl0 as input, irsl[1-2] as output, and separate + * inputs are used for SIR and MIR/FIR + */ + outb(0x48, iobase+7); + break; + case 0x0E: /* Supports SIR Mode only */ + outb(0x28, iobase+7); /* Set irsl[0-2] as output */ + break; + case 0x0F: /* No dongle connected */ + IRDA_DEBUG(0, "%s(), %s\n", + __FUNCTION__, dongle_types[dongle_id]); + + switch_bank(iobase, BANK0); + outb(0x62, iobase+MCR); + break; + default: + IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", + __FUNCTION__, dongle_id); + } + + /* IRCFG1: IRSL1 and 2 are set to IrDA mode */ + outb(0x00, iobase+4); + + /* Restore bank register */ + outb(bank, iobase+BSR); + +} /* set_up_dongle_interface */ + +/* + * Function nsc_ircc_change_dongle_speed (iobase, speed, dongle_id) + * + * Change speed of the attach dongle + * + */ +static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id) +{ + __u8 bank; + + /* Save current bank */ + bank = inb(iobase+BSR); + + /* Select Bank 7 */ + switch_bank(iobase, BANK7); + + /* IRCFG1: set according to dongle_id */ + switch (dongle_id) { + case 0x00: /* same as */ + case 0x01: /* Differential serial interface */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x02: /* same as */ + case 0x03: /* Reserved */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x04: /* Sharp RY5HD01 */ + break; + case 0x05: /* Reserved */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x06: /* Single-ended serial interface */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x07: /* Consumer-IR only */ + IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */ + IRDA_DEBUG(0, "%s(), %s\n", + __FUNCTION__, dongle_types[dongle_id]); + outb(0x00, iobase+4); + if (speed > 115200) + outb(0x01, iobase+4); + break; + case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */ + outb(0x01, iobase+4); + + if (speed == 4000000) { + /* There was a cli() there, but we now are already + * under spin_lock_irqsave() - JeanII */ + outb(0x81, iobase+4); + outb(0x80, iobase+4); + } else + outb(0x00, iobase+4); + break; + case 0x0A: /* same as */ + case 0x0B: /* Reserved */ + IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", + __FUNCTION__, dongle_types[dongle_id]); + break; + case 0x0C: /* same as */ + case 0x0D: /* HP HSDL-1100/HSDL-2100 */ + break; + case 0x0E: /* Supports SIR Mode only */ + break; + case 0x0F: /* No dongle connected */ + IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", + __FUNCTION__, dongle_types[dongle_id]); + + switch_bank(iobase, BANK0); + outb(0x62, iobase+MCR); + break; + default: + IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__); + } + /* Restore bank register */ + outb(bank, iobase+BSR); +} + +/* + * Function nsc_ircc_change_speed (self, baud) + * + * Change the speed of the device + * + * This function *must* be called with irq off and spin-lock. + */ +static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed) +{ + struct net_device *dev = self->netdev; + __u8 mcr = MCR_SIR; + int iobase; + __u8 bank; + __u8 ier; /* Interrupt enable register */ + + IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed); + + IRDA_ASSERT(self != NULL, return 0;); + + iobase = self->io.fir_base; + + /* Update accounting for new speed */ + self->io.speed = speed; + + /* Save current bank */ + bank = inb(iobase+BSR); + + /* Disable interrupts */ + switch_bank(iobase, BANK0); + outb(0, iobase+IER); + + /* Select Bank 2 */ + switch_bank(iobase, BANK2); + + outb(0x00, iobase+BGDH); + switch (speed) { + case 9600: outb(0x0c, iobase+BGDL); break; + case 19200: outb(0x06, iobase+BGDL); break; + case 38400: outb(0x03, iobase+BGDL); break; + case 57600: outb(0x02, iobase+BGDL); break; + case 115200: outb(0x01, iobase+BGDL); break; + case 576000: + switch_bank(iobase, BANK5); + + /* IRCR2: MDRS is set */ + outb(inb(iobase+4) | 0x04, iobase+4); + + mcr = MCR_MIR; + IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__); + break; + case 1152000: + mcr = MCR_MIR; + IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__); + break; + case 4000000: + mcr = MCR_FIR; + IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__); + break; + default: + mcr = MCR_FIR; + IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", + __FUNCTION__, speed); + break; + } + + /* Set appropriate speed mode */ + switch_bank(iobase, BANK0); + outb(mcr | MCR_TX_DFR, iobase+MCR); + + /* Give some hits to the transceiver */ + nsc_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id); + + /* Set FIFO threshold to TX17, RX16 */ + switch_bank(iobase, BANK0); + outb(0x00, iobase+FCR); + outb(FCR_FIFO_EN, iobase+FCR); + outb(FCR_RXTH| /* Set Rx FIFO threshold */ + FCR_TXTH| /* Set Tx FIFO threshold */ + FCR_TXSR| /* Reset Tx FIFO */ + FCR_RXSR| /* Reset Rx FIFO */ + FCR_FIFO_EN, /* Enable FIFOs */ + iobase+FCR); + + /* Set FIFO size to 32 */ + switch_bank(iobase, BANK2); + outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2); + + /* Enable some interrupts so we can receive frames */ + switch_bank(iobase, BANK0); + if (speed > 115200) { + /* Install FIR xmit handler */ + dev->hard_start_xmit = nsc_ircc_hard_xmit_fir; + ier = IER_SFIF_IE; + nsc_ircc_dma_receive(self); + } else { + /* Install SIR xmit handler */ + dev->hard_start_xmit = nsc_ircc_hard_xmit_sir; + ier = IER_RXHDL_IE; + } + /* Set our current interrupt mask */ + outb(ier, iobase+IER); + + /* Restore BSR */ + outb(bank, iobase+BSR); + + /* Make sure interrupt handlers keep the proper interrupt mask */ + return(ier); +} + +/* + * Function nsc_ircc_hard_xmit (skb, dev) + * + * Transmit the frame! + * + */ +static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev) +{ + struct nsc_ircc_cb *self; + unsigned long flags; + int iobase; + __s32 speed; + __u8 bank; + + self = (struct nsc_ircc_cb *) dev->priv; + + IRDA_ASSERT(self != NULL, return 0;); + + iobase = self->io.fir_base; + + netif_stop_queue(dev); + + /* Make sure tests *& speed change are atomic */ + spin_lock_irqsave(&self->lock, flags); + + /* Check if we need to change the speed */ + speed = irda_get_next_speed(skb); + if ((speed != self->io.speed) && (speed != -1)) { + /* Check for empty frame. */ + if (!skb->len) { + /* If we just sent a frame, we get called before + * the last bytes get out (because of the SIR FIFO). + * If this is the case, let interrupt handler change + * the speed itself... Jean II */ + if (self->io.direction == IO_RECV) { + nsc_ircc_change_speed(self, speed); + /* TODO : For SIR->SIR, the next packet + * may get corrupted - Jean II */ + netif_wake_queue(dev); + } else { + self->new_speed = speed; + /* Queue will be restarted after speed change + * to make sure packets gets through the + * proper xmit handler - Jean II */ + } + dev->trans_start = jiffies; + spin_unlock_irqrestore(&self->lock, flags); + dev_kfree_skb(skb); + return 0; + } else + self->new_speed = speed; + } + + /* Save current bank */ + bank = inb(iobase+BSR); + + self->tx_buff.data = self->tx_buff.head; + + self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, + self->tx_buff.truesize); + + self->stats.tx_bytes += self->tx_buff.len; + + /* Add interrupt on tx low level (will fire immediately) */ + switch_bank(iobase, BANK0); + outb(IER_TXLDL_IE, iobase+IER); + + /* Restore bank register */ + outb(bank, iobase+BSR); + + dev->trans_start = jiffies; + spin_unlock_irqrestore(&self->lock, flags); + + dev_kfree_skb(skb); + + return 0; +} + +static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev) +{ + struct nsc_ircc_cb *self; + unsigned long flags; + int iobase; + __s32 speed; + __u8 bank; + int mtt, diff; + + self = (struct nsc_ircc_cb *) dev->priv; + iobase = self->io.fir_base; + + netif_stop_queue(dev); + + /* Make sure tests *& speed change are atomic */ + spin_lock_irqsave(&self->lock, flags); + + /* Check if we need to change the speed */ + speed = irda_get_next_speed(skb); + if ((speed != self->io.speed) && (speed != -1)) { + /* Check for empty frame. */ + if (!skb->len) { + /* If we are currently transmitting, defer to + * interrupt handler. - Jean II */ + if(self->tx_fifo.len == 0) { + nsc_ircc_change_speed(self, speed); + netif_wake_queue(dev); + } else { + self->new_speed = speed; + /* Keep queue stopped : + * the speed change operation may change the + * xmit handler, and we want to make sure + * the next packet get through the proper + * Tx path, so block the Tx queue until + * the speed change has been done. + * Jean II */ + } + dev->trans_start = jiffies; + spin_unlock_irqrestore(&self->lock, flags); + dev_kfree_skb(skb); + return 0; + } else { + /* Change speed after current frame */ + self->new_speed = speed; + } + } + + /* Save current bank */ + bank = inb(iobase+BSR); + + /* Register and copy this frame to DMA memory */ + self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail; + self->tx_fifo.queue[self->tx_fifo.free].len = skb->len; + self->tx_fifo.tail += skb->len; + + self->stats.tx_bytes += skb->len; + + memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data, + skb->len); + + self->tx_fifo.len++; + self->tx_fifo.free++; + + /* Start transmit only if there is currently no transmit going on */ + if (self->tx_fifo.len == 1) { + /* Check if we must wait the min turn time or not */ + mtt = irda_get_mtt(skb); + if (mtt) { + /* Check how much time we have used already */ + do_gettimeofday(&self->now); + diff = self->now.tv_usec - self->stamp.tv_usec; + if (diff < 0) + diff += 1000000; + + /* Check if the mtt is larger than the time we have + * already used by all the protocol processing + */ + if (mtt > diff) { + mtt -= diff; + + /* + * Use timer if delay larger than 125 us, and + * use udelay for smaller values which should + * be acceptable + */ + if (mtt > 125) { + /* Adjust for timer resolution */ + mtt = mtt / 125; + + /* Setup timer */ + switch_bank(iobase, BANK4); + outb(mtt & 0xff, iobase+TMRL); + outb((mtt >> 8) & 0x0f, iobase+TMRH); + + /* Start timer */ + outb(IRCR1_TMR_EN, iobase+IRCR1); + self->io.direction = IO_XMIT; + + /* Enable timer interrupt */ + switch_bank(iobase, BANK0); + outb(IER_TMR_IE, iobase+IER); + + /* Timer will take care of the rest */ + goto out; + } else + udelay(mtt); + } + } + /* Enable DMA interrupt */ + switch_bank(iobase, BANK0); + outb(IER_DMA_IE, iobase+IER); + + /* Transmit frame */ + nsc_ircc_dma_xmit(self, iobase); + } + out: + /* Not busy transmitting anymore if window is not full, + * and if we don't need to change speed */ + if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0)) + netif_wake_queue(self->netdev); + + /* Restore bank register */ + outb(bank, iobase+BSR); + + dev->trans_start = jiffies; + spin_unlock_irqrestore(&self->lock, flags); + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function nsc_ircc_dma_xmit (self, iobase) + * + * Transmit data using DMA + * + */ +static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase) +{ + int bsr; + + /* Save current bank */ + bsr = inb(iobase+BSR); + + /* Disable DMA */ + switch_bank(iobase, BANK0); + outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR); + + self->io.direction = IO_XMIT; + + /* Choose transmit DMA channel */ + switch_bank(iobase, BANK2); + outb(ECR1_DMASWP|ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1); + + irda_setup_dma(self->io.dma, + ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start - + self->tx_buff.head) + self->tx_buff_dma, + self->tx_fifo.queue[self->tx_fifo.ptr].len, + DMA_TX_MODE); + + /* Enable DMA and SIR interaction pulse */ + switch_bank(iobase, BANK0); + outb(inb(iobase+MCR)|MCR_TX_DFR|MCR_DMA_EN|MCR_IR_PLS, iobase+MCR); + + /* Restore bank register */ + outb(bsr, iobase+BSR); +} + +/* + * Function nsc_ircc_pio_xmit (self, iobase) + * + * Transmit data using PIO. Returns the number of bytes that actually + * got transferred + * + */ +static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size) +{ + int actual = 0; + __u8 bank; + + IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + + /* Save current bank */ + bank = inb(iobase+BSR); + + switch_bank(iobase, BANK0); + if (!(inb_p(iobase+LSR) & LSR_TXEMP)) { + IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n", + __FUNCTION__); + + /* FIFO may still be filled to the Tx interrupt threshold */ + fifo_size -= 17; + } + + /* Fill FIFO with current frame */ + while ((fifo_size-- > 0) && (actual < len)) { + /* Transmit next byte */ + outb(buf[actual++], iobase+TXD); + } + + IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", + __FUNCTION__, fifo_size, actual, len); + + /* Restore bank */ + outb(bank, iobase+BSR); + + return actual; +} + +/* + * Function nsc_ircc_dma_xmit_complete (self) + * + * The transfer of a frame in finished. This function will only be called + * by the interrupt handler + * + */ +static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self) +{ + int iobase; + __u8 bank; + int ret = TRUE; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + iobase = self->io.fir_base; + + /* Save current bank */ + bank = inb(iobase+BSR); + + /* Disable DMA */ + switch_bank(iobase, BANK0); + outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR); + + /* Check for underrrun! */ + if (inb(iobase+ASCR) & ASCR_TXUR) { + self->stats.tx_errors++; + self->stats.tx_fifo_errors++; + + /* Clear bit, by writing 1 into it */ + outb(ASCR_TXUR, iobase+ASCR); + } else { + self->stats.tx_packets++; + } + + /* Finished with this frame, so prepare for next */ + self->tx_fifo.ptr++; + self->tx_fifo.len--; + + /* Any frames to be sent back-to-back? */ + if (self->tx_fifo.len) { + nsc_ircc_dma_xmit(self, iobase); + + /* Not finished yet! */ + ret = FALSE; + } else { + /* Reset Tx FIFO info */ + self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; + self->tx_fifo.tail = self->tx_buff.head; + } + + /* Make sure we have room for more frames and + * that we don't need to change speed */ + if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0)) { + /* Not busy transmitting anymore */ + /* Tell the network layer, that we can accept more frames */ + netif_wake_queue(self->netdev); + } + + /* Restore bank */ + outb(bank, iobase+BSR); + + return ret; +} + +/* + * Function nsc_ircc_dma_receive (self) + * + * Get ready for receiving a frame. The device will initiate a DMA + * if it starts to receive a frame. + * + */ +static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self) +{ + int iobase; + __u8 bsr; + + iobase = self->io.fir_base; + + /* Reset Tx FIFO info */ + self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; + self->tx_fifo.tail = self->tx_buff.head; + + /* Save current bank */ + bsr = inb(iobase+BSR); + + /* Disable DMA */ + switch_bank(iobase, BANK0); + outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR); + + /* Choose DMA Rx, DMA Fairness, and Advanced mode */ + switch_bank(iobase, BANK2); + outb(ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1); + + self->io.direction = IO_RECV; + self->rx_buff.data = self->rx_buff.head; + + /* Reset Rx FIFO. This will also flush the ST_FIFO */ + switch_bank(iobase, BANK0); + outb(FCR_RXSR|FCR_FIFO_EN, iobase+FCR); + + self->st_fifo.len = self->st_fifo.pending_bytes = 0; + self->st_fifo.tail = self->st_fifo.head = 0; + + irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize, + DMA_RX_MODE); + + /* Enable DMA */ + switch_bank(iobase, BANK0); + outb(inb(iobase+MCR)|MCR_DMA_EN, iobase+MCR); + + /* Restore bank register */ + outb(bsr, iobase+BSR); + + return 0; +} + +/* + * Function nsc_ircc_dma_receive_complete (self) + * + * Finished with receiving frames + * + * + */ +static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase) +{ + struct st_fifo *st_fifo; + struct sk_buff *skb; + __u8 status; + __u8 bank; + int len; + + st_fifo = &self->st_fifo; + + /* Save current bank */ + bank = inb(iobase+BSR); + + /* Read all entries in status FIFO */ + switch_bank(iobase, BANK5); + while ((status = inb(iobase+FRM_ST)) & FRM_ST_VLD) { + /* We must empty the status FIFO no matter what */ + len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8); + + if (st_fifo->tail >= MAX_RX_WINDOW) { + IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__); + continue; + } + + st_fifo->entries[st_fifo->tail].status = status; + st_fifo->entries[st_fifo->tail].len = len; + st_fifo->pending_bytes += len; + st_fifo->tail++; + st_fifo->len++; + } + /* Try to process all entries in status FIFO */ + while (st_fifo->len > 0) { + /* Get first entry */ + status = st_fifo->entries[st_fifo->head].status; + len = st_fifo->entries[st_fifo->head].len; + st_fifo->pending_bytes -= len; + st_fifo->head++; + st_fifo->len--; + + /* Check for errors */ + if (status & FRM_ST_ERR_MSK) { + if (status & FRM_ST_LOST_FR) { + /* Add number of lost frames to stats */ + self->stats.rx_errors += len; + } else { + /* Skip frame */ + self->stats.rx_errors++; + + self->rx_buff.data += len; + + if (status & FRM_ST_MAX_LEN) + self->stats.rx_length_errors++; + + if (status & FRM_ST_PHY_ERR) + self->stats.rx_frame_errors++; + + if (status & FRM_ST_BAD_CRC) + self->stats.rx_crc_errors++; + } + /* The errors below can be reported in both cases */ + if (status & FRM_ST_OVR1) + self->stats.rx_fifo_errors++; + + if (status & FRM_ST_OVR2) + self->stats.rx_fifo_errors++; + } else { + /* + * First we must make sure that the frame we + * want to deliver is all in main memory. If we + * cannot tell, then we check if the Rx FIFO is + * empty. If not then we will have to take a nap + * and try again later. + */ + if (st_fifo->pending_bytes < self->io.fifo_size) { + switch_bank(iobase, BANK0); + if (inb(iobase+LSR) & LSR_RXDA) { + /* Put this entry back in fifo */ + st_fifo->head--; + st_fifo->len++; + st_fifo->pending_bytes += len; + st_fifo->entries[st_fifo->head].status = status; + st_fifo->entries[st_fifo->head].len = len; + /* + * DMA not finished yet, so try again + * later, set timer value, resolution + * 125 us + */ + switch_bank(iobase, BANK4); + outb(0x02, iobase+TMRL); /* x 125 us */ + outb(0x00, iobase+TMRH); + + /* Start timer */ + outb(IRCR1_TMR_EN, iobase+IRCR1); + + /* Restore bank register */ + outb(bank, iobase+BSR); + + return FALSE; /* I'll be back! */ + } + } + + /* + * Remember the time we received this frame, so we can + * reduce the min turn time a bit since we will know + * how much time we have used for protocol processing + */ + do_gettimeofday(&self->stamp); + + skb = dev_alloc_skb(len+1); + if (skb == NULL) { + IRDA_WARNING("%s(), memory squeeze, " + "dropping frame.\n", + __FUNCTION__); + self->stats.rx_dropped++; + + /* Restore bank register */ + outb(bank, iobase+BSR); + + return FALSE; + } + + /* Make sure IP header gets aligned */ + skb_reserve(skb, 1); + + /* Copy frame without CRC */ + if (self->io.speed < 4000000) { + skb_put(skb, len-2); + memcpy(skb->data, self->rx_buff.data, len-2); + } else { + skb_put(skb, len-4); + memcpy(skb->data, self->rx_buff.data, len-4); + } + + /* Move to next frame */ + self->rx_buff.data += len; + self->stats.rx_bytes += len; + self->stats.rx_packets++; + + skb->dev = self->netdev; + skb->mac.raw = skb->data; + skb->protocol = htons(ETH_P_IRDA); + netif_rx(skb); + self->netdev->last_rx = jiffies; + } + } + /* Restore bank register */ + outb(bank, iobase+BSR); + + return TRUE; +} + +/* + * Function nsc_ircc_pio_receive (self) + * + * Receive all data in receiver FIFO + * + */ +static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self) +{ + __u8 byte; + int iobase; + + iobase = self->io.fir_base; + + /* Receive all characters in Rx FIFO */ + do { + byte = inb(iobase+RXD); + async_unwrap_char(self->netdev, &self->stats, &self->rx_buff, + byte); + } while (inb(iobase+LSR) & LSR_RXDA); /* Data available */ +} + +/* + * Function nsc_ircc_sir_interrupt (self, eir) + * + * Handle SIR interrupt + * + */ +static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir) +{ + int actual; + + /* Check if transmit FIFO is low on data */ + if (eir & EIR_TXLDL_EV) { + /* Write data left in transmit buffer */ + actual = nsc_ircc_pio_write(self->io.fir_base, + self->tx_buff.data, + self->tx_buff.len, + self->io.fifo_size); + self->tx_buff.data += actual; + self->tx_buff.len -= actual; + + self->io.direction = IO_XMIT; + + /* Check if finished */ + if (self->tx_buff.len > 0) + self->ier = IER_TXLDL_IE; + else { + + self->stats.tx_packets++; + netif_wake_queue(self->netdev); + self->ier = IER_TXEMP_IE; + } + + } + /* Check if transmission has completed */ + if (eir & EIR_TXEMP_EV) { + /* Turn around and get ready to receive some data */ + self->io.direction = IO_RECV; + self->ier = IER_RXHDL_IE; + /* Check if we need to change the speed? + * Need to be after self->io.direction to avoid race with + * nsc_ircc_hard_xmit_sir() - Jean II */ + if (self->new_speed) { + IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__); + self->ier = nsc_ircc_change_speed(self, + self->new_speed); + self->new_speed = 0; + netif_wake_queue(self->netdev); + + /* Check if we are going to FIR */ + if (self->io.speed > 115200) { + /* No need to do anymore SIR stuff */ + return; + } + } + } + + /* Rx FIFO threshold or timeout */ + if (eir & EIR_RXHDL_EV) { + nsc_ircc_pio_receive(self); + + /* Keep receiving */ + self->ier = IER_RXHDL_IE; + } +} + +/* + * Function nsc_ircc_fir_interrupt (self, eir) + * + * Handle MIR/FIR interrupt + * + */ +static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase, + int eir) +{ + __u8 bank; + + bank = inb(iobase+BSR); + + /* Status FIFO event*/ + if (eir & EIR_SFIF_EV) { + /* Check if DMA has finished */ + if (nsc_ircc_dma_receive_complete(self, iobase)) { + /* Wait for next status FIFO interrupt */ + self->ier = IER_SFIF_IE; + } else { + self->ier = IER_SFIF_IE | IER_TMR_IE; + } + } else if (eir & EIR_TMR_EV) { /* Timer finished */ + /* Disable timer */ + switch_bank(iobase, BANK4); + outb(0, iobase+IRCR1); + + /* Clear timer event */ + switch_bank(iobase, BANK0); + outb(ASCR_CTE, iobase+ASCR); + + /* Check if this is a Tx timer interrupt */ + if (self->io.direction == IO_XMIT) { + nsc_ircc_dma_xmit(self, iobase); + + /* Interrupt on DMA */ + self->ier = IER_DMA_IE; + } else { + /* Check (again) if DMA has finished */ + if (nsc_ircc_dma_receive_complete(self, iobase)) { + self->ier = IER_SFIF_IE; + } else { + self->ier = IER_SFIF_IE | IER_TMR_IE; + } + } + } else if (eir & EIR_DMA_EV) { + /* Finished with all transmissions? */ + if (nsc_ircc_dma_xmit_complete(self)) { + if(self->new_speed != 0) { + /* As we stop the Tx queue, the speed change + * need to be done when the Tx fifo is + * empty. Ask for a Tx done interrupt */ + self->ier = IER_TXEMP_IE; + } else { + /* Check if there are more frames to be + * transmitted */ + if (irda_device_txqueue_empty(self->netdev)) { + /* Prepare for receive */ + nsc_ircc_dma_receive(self); + self->ier = IER_SFIF_IE; + } else + IRDA_WARNING("%s(), potential " + "Tx queue lockup !\n", + __FUNCTION__); + } + } else { + /* Not finished yet, so interrupt on DMA again */ + self->ier = IER_DMA_IE; + } + } else if (eir & EIR_TXEMP_EV) { + /* The Tx FIFO has totally drained out, so now we can change + * the speed... - Jean II */ + self->ier = nsc_ircc_change_speed(self, self->new_speed); + self->new_speed = 0; + netif_wake_queue(self->netdev); + /* Note : nsc_ircc_change_speed() restarted Rx fifo */ + } + + outb(bank, iobase+BSR); +} + +/* + * Function nsc_ircc_interrupt (irq, dev_id, regs) + * + * An interrupt from the chip has arrived. Time to do some work + * + */ +static irqreturn_t nsc_ircc_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct nsc_ircc_cb *self; + __u8 bsr, eir; + int iobase; + + if (!dev) { + IRDA_WARNING("%s: irq %d for unknown device.\n", + driver_name, irq); + return IRQ_NONE; + } + self = (struct nsc_ircc_cb *) dev->priv; + + spin_lock(&self->lock); + + iobase = self->io.fir_base; + + bsr = inb(iobase+BSR); /* Save current bank */ + + switch_bank(iobase, BANK0); + self->ier = inb(iobase+IER); + eir = inb(iobase+EIR) & self->ier; /* Mask out the interesting ones */ + + outb(0, iobase+IER); /* Disable interrupts */ + + if (eir) { + /* Dispatch interrupt handler for the current speed */ + if (self->io.speed > 115200) + nsc_ircc_fir_interrupt(self, iobase, eir); + else + nsc_ircc_sir_interrupt(self, eir); + } + + outb(self->ier, iobase+IER); /* Restore interrupts */ + outb(bsr, iobase+BSR); /* Restore bank register */ + + spin_unlock(&self->lock); + return IRQ_RETVAL(eir); +} + +/* + * Function nsc_ircc_is_receiving (self) + * + * Return TRUE is we are currently receiving a frame + * + */ +static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self) +{ + unsigned long flags; + int status = FALSE; + int iobase; + __u8 bank; + + IRDA_ASSERT(self != NULL, return FALSE;); + + spin_lock_irqsave(&self->lock, flags); + + if (self->io.speed > 115200) { + iobase = self->io.fir_base; + + /* Check if rx FIFO is not empty */ + bank = inb(iobase+BSR); + switch_bank(iobase, BANK2); + if ((inb(iobase+RXFLV) & 0x3f) != 0) { + /* We are receiving something */ + status = TRUE; + } + outb(bank, iobase+BSR); + } else + status = (self->rx_buff.state != OUTSIDE_FRAME); + + spin_unlock_irqrestore(&self->lock, flags); + + return status; +} + +/* + * Function nsc_ircc_net_open (dev) + * + * Start the device + * + */ +static int nsc_ircc_net_open(struct net_device *dev) +{ + struct nsc_ircc_cb *self; + int iobase; + char hwname[32]; + __u8 bank; + + IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + + IRDA_ASSERT(dev != NULL, return -1;); + self = (struct nsc_ircc_cb *) dev->priv; + + IRDA_ASSERT(self != NULL, return 0;); + + iobase = self->io.fir_base; + + if (request_irq(self->io.irq, nsc_ircc_interrupt, 0, dev->name, dev)) { + IRDA_WARNING("%s, unable to allocate irq=%d\n", + driver_name, self->io.irq); + return -EAGAIN; + } + /* + * Always allocate the DMA channel after the IRQ, and clean up on + * failure. + */ + if (request_dma(self->io.dma, dev->name)) { + IRDA_WARNING("%s, unable to allocate dma=%d\n", + driver_name, self->io.dma); + free_irq(self->io.irq, dev); + return -EAGAIN; + } + + /* Save current bank */ + bank = inb(iobase+BSR); + + /* turn on interrupts */ + switch_bank(iobase, BANK0); + outb(IER_LS_IE | IER_RXHDL_IE, iobase+IER); + + /* Restore bank register */ + outb(bank, iobase+BSR); + + /* Ready to play! */ + netif_start_queue(dev); + + /* Give self a hardware name */ + sprintf(hwname, "NSC-FIR @ 0x%03x", self->io.fir_base); + + /* + * Open new IrLAP layer instance, now that everything should be + * initialized properly + */ + self->irlap = irlap_open(dev, &self->qos, hwname); + + return 0; +} + +/* + * Function nsc_ircc_net_close (dev) + * + * Stop the device + * + */ +static int nsc_ircc_net_close(struct net_device *dev) +{ + struct nsc_ircc_cb *self; + int iobase; + __u8 bank; + + IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + + IRDA_ASSERT(dev != NULL, return -1;); + + self = (struct nsc_ircc_cb *) dev->priv; + IRDA_ASSERT(self != NULL, return 0;); + + /* Stop device */ + netif_stop_queue(dev); + + /* Stop and remove instance of IrLAP */ + if (self->irlap) + irlap_close(self->irlap); + self->irlap = NULL; + + iobase = self->io.fir_base; + + disable_dma(self->io.dma); + + /* Save current bank */ + bank = inb(iobase+BSR); + + /* Disable interrupts */ + switch_bank(iobase, BANK0); + outb(0, iobase+IER); + + free_irq(self->io.irq, dev); + free_dma(self->io.dma); + + /* Restore bank register */ + outb(bank, iobase+BSR); + + return 0; +} + +/* + * Function nsc_ircc_net_ioctl (dev, rq, cmd) + * + * Process IOCTL commands for this device + * + */ +static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct if_irda_req *irq = (struct if_irda_req *) rq; + struct nsc_ircc_cb *self; + unsigned long flags; + int ret = 0; + + IRDA_ASSERT(dev != NULL, return -1;); + + self = dev->priv; + + IRDA_ASSERT(self != NULL, return -1;); + + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + + switch (cmd) { + case SIOCSBANDWIDTH: /* Set bandwidth */ + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } + spin_lock_irqsave(&self->lock, flags); + nsc_ircc_change_speed(self, irq->ifr_baudrate); + spin_unlock_irqrestore(&self->lock, flags); + break; + case SIOCSMEDIABUSY: /* Set media busy */ + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } + irda_device_set_media_busy(self->netdev, TRUE); + break; + case SIOCGRECEIVING: /* Check if we are receiving right now */ + /* This is already protected */ + irq->ifr_receiving = nsc_ircc_is_receiving(self); + break; + default: + ret = -EOPNOTSUPP; + } + return ret; +} + +static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev) +{ + struct nsc_ircc_cb *self = (struct nsc_ircc_cb *) dev->priv; + + return &self->stats; +} + +static void nsc_ircc_suspend(struct nsc_ircc_cb *self) +{ + IRDA_MESSAGE("%s, Suspending\n", driver_name); + + if (self->io.suspended) + return; + + nsc_ircc_net_close(self->netdev); + + self->io.suspended = 1; +} + +static void nsc_ircc_wakeup(struct nsc_ircc_cb *self) +{ + if (!self->io.suspended) + return; + + nsc_ircc_setup(&self->io); + nsc_ircc_net_open(self->netdev); + + IRDA_MESSAGE("%s, Waking up\n", driver_name); + + self->io.suspended = 0; +} + +static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data) +{ + struct nsc_ircc_cb *self = (struct nsc_ircc_cb*) dev->data; + if (self) { + switch (rqst) { + case PM_SUSPEND: + nsc_ircc_suspend(self); + break; + case PM_RESUME: + nsc_ircc_wakeup(self); + break; + } + } + return 0; +} + +MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); +MODULE_DESCRIPTION("NSC IrDA Device Driver"); +MODULE_LICENSE("GPL"); + + +module_param(qos_mtt_bits, int, 0); +MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time"); +module_param_array(io, int, NULL, 0); +MODULE_PARM_DESC(io, "Base I/O addresses"); +module_param_array(irq, int, NULL, 0); +MODULE_PARM_DESC(irq, "IRQ lines"); +module_param_array(dma, int, NULL, 0); +MODULE_PARM_DESC(dma, "DMA channels"); +module_param(dongle_id, int, 0); +MODULE_PARM_DESC(dongle_id, "Type-id of used dongle"); + +module_init(nsc_ircc_init); +module_exit(nsc_ircc_cleanup); + |