irda: move drivers/net/irda to drivers/staging/irda/drivers

Move the irda drivers from drivers/net/irda/ to
drivers/staging/irda/drivers as they will be deleted in a future kernel
release.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 1134 deletions

diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
deleted file mode 100644
index ee2cb70b688d..000000000000
--- a/drivers/net/irda/stir4200.c
+++ /dev/null
@@ -1,1134 +0,0 @@
-/*****************************************************************************
-*
-* Filename:      stir4200.c
-* Version:       0.4
-* Description:   Irda SigmaTel USB Dongle
-* Status:        Experimental
-* Author:        Stephen Hemminger <shemminger@osdl.org>
-*
-*  	Based on earlier driver by Paul Stewart <stewart@parc.com>
-*
-*	Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
-*	Copyright (C) 2001, Dag Brattli <dag@brattli.net>
-*	Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
-*	Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org>
-*
-*	This program is free software; you can redistribute it and/or modify
-*	it under the terms of the GNU General Public License as published by
-*	the Free Software Foundation; either version 2 of the License.
-*
-*	This program is distributed in the hope that it will be useful,
-*	but WITHOUT ANY WARRANTY; without even the implied warranty of
-*	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-*	GNU General Public License for more details.
-*
-*	You should have received a copy of the GNU General Public License
-*	along with this program; if not, write to the Free Software
-*	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*
-*****************************************************************************/
-
-/*
- * This dongle does no framing, and requires polling to receive the
- * data.  The STIr4200 has bulk in and out endpoints just like
- * usr-irda devices, but the data it sends and receives is raw; like
- * irtty, it needs to call the wrap and unwrap functions to add and
- * remove SOF/BOF and escape characters to/from the frame.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-
-#include <linux/kernel.h>
-#include <linux/sched/signal.h>
-#include <linux/ktime.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/usb.h>
-#include <linux/crc32.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-#include <net/irda/wrapper.h>
-#include <net/irda/crc.h>
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-
-MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
-MODULE_DESCRIPTION("IrDA-USB Dongle Driver for SigmaTel STIr4200");
-MODULE_LICENSE("GPL");
-
-static int qos_mtt_bits = 0x07;	/* 1 ms or more */
-module_param(qos_mtt_bits, int, 0);
-MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
-
-static int rx_sensitivity = 1;	/* FIR 0..4, SIR 0..6 */
-module_param(rx_sensitivity, int, 0);
-MODULE_PARM_DESC(rx_sensitivity, "Set Receiver sensitivity (0-6, 0 is most sensitive)");
-
-static int tx_power = 0;	/* 0 = highest ... 3 = lowest */
-module_param(tx_power, int, 0);
-MODULE_PARM_DESC(tx_power, "Set Transmitter power (0-3, 0 is highest power)");
-
-#define STIR_IRDA_HEADER  	4
-#define CTRL_TIMEOUT		100	   /* milliseconds */
-#define TRANSMIT_TIMEOUT	200	   /* milliseconds */
-#define STIR_FIFO_SIZE		4096
-#define FIFO_REGS_SIZE		3
-
-enum FirChars {
-	FIR_CE   = 0x7d,
-	FIR_XBOF = 0x7f,
-	FIR_EOF  = 0x7e,
-};
-
-enum StirRequests {
-	REQ_WRITE_REG =		0x00,
-	REQ_READ_REG =		0x01,
-	REQ_READ_ROM =		0x02,
-	REQ_WRITE_SINGLE =	0x03,
-};
-
-/* Register offsets */
-enum StirRegs {
-	REG_RSVD=0,
-	REG_MODE,
-	REG_PDCLK,
-	REG_CTRL1,
-	REG_CTRL2,
-	REG_FIFOCTL,
-	REG_FIFOLSB,
-	REG_FIFOMSB,
-	REG_DPLL,
-	REG_IRDIG,
-	REG_TEST=15,
-};
-
-enum StirModeMask {
-	MODE_FIR = 0x80,
-	MODE_SIR = 0x20,
-	MODE_ASK = 0x10,
-	MODE_FASTRX = 0x08,
-	MODE_FFRSTEN = 0x04,
-	MODE_NRESET = 0x02,
-	MODE_2400 = 0x01,
-};
-
-enum StirPdclkMask {
-	PDCLK_4000000 = 0x02,
-	PDCLK_115200 = 0x09,
-	PDCLK_57600 = 0x13,
-	PDCLK_38400 = 0x1D,
-	PDCLK_19200 = 0x3B,
-	PDCLK_9600 = 0x77,
-	PDCLK_2400 = 0xDF,
-};
-
-enum StirCtrl1Mask {
-	CTRL1_SDMODE = 0x80,
-	CTRL1_RXSLOW = 0x40,
-	CTRL1_TXPWD = 0x10,
-	CTRL1_RXPWD = 0x08,
-	CTRL1_SRESET = 0x01,
-};
-
-enum StirCtrl2Mask {
-	CTRL2_SPWIDTH = 0x08,
-	CTRL2_REVID = 0x03,
-};
-
-enum StirFifoCtlMask {
-	FIFOCTL_DIR = 0x10,
-	FIFOCTL_CLR = 0x08,
-	FIFOCTL_EMPTY = 0x04,
-};
-
-enum StirDiagMask {
-	IRDIG_RXHIGH = 0x80,
-	IRDIG_RXLOW = 0x40,
-};
-
-enum StirTestMask {
-	TEST_PLLDOWN = 0x80,
-	TEST_LOOPIR = 0x40,
-	TEST_LOOPUSB = 0x20,
-	TEST_TSTENA = 0x10,
-	TEST_TSTOSC = 0x0F,
-};
-
-struct stir_cb {
-        struct usb_device *usbdev;      /* init: probe_irda */
-        struct net_device *netdev;      /* network layer */
-        struct irlap_cb   *irlap;       /* The link layer we are binded to */
-
-        struct qos_info   qos;
-	unsigned 	  speed;	/* Current speed */
-
-        struct task_struct *thread;     /* transmit thread */
-
-	struct sk_buff	  *tx_pending;
-	void		  *io_buf;	/* transmit/receive buffer */
-	__u8		  *fifo_status;
-
-	iobuff_t  	  rx_buff;	/* receive unwrap state machine */
-	ktime_t		rx_time;
-	int		  receiving;
-	struct urb	 *rx_urb;
-};
-
-
-/* These are the currently known USB ids */
-static const struct usb_device_id dongles[] = {
-    /* SigmaTel, Inc,  STIr4200 IrDA/USB Bridge */
-    { USB_DEVICE(0x066f, 0x4200) },
-    { }
-};
-
-MODULE_DEVICE_TABLE(usb, dongles);
-
-/* Send control message to set dongle register */
-static int write_reg(struct stir_cb *stir, __u16 reg, __u8 value)
-{
-	struct usb_device *dev = stir->usbdev;
-
-	pr_debug("%s: write reg %d = 0x%x\n",
-		 stir->netdev->name, reg, value);
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-			       REQ_WRITE_SINGLE,
-			       USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE,
-			       value, reg, NULL, 0,
-			       CTRL_TIMEOUT);
-}
-
-/* Send control message to read multiple registers */
-static inline int read_reg(struct stir_cb *stir, __u16 reg,
-		    __u8 *data, __u16 count)
-{
-	struct usb_device *dev = stir->usbdev;
-
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       REQ_READ_REG,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       0, reg, data, count,
-			       CTRL_TIMEOUT);
-}
-
-static inline int isfir(u32 speed)
-{
-	return speed == 4000000;
-}
-
-/*
- * Prepare a FIR IrDA frame for transmission to the USB dongle.  The
- * FIR transmit frame is documented in the datasheet.  It consists of
- * a two byte 0x55 0xAA sequence, two little-endian length bytes, a
- * sequence of exactly 16 XBOF bytes of 0x7E, two BOF bytes of 0x7E,
- * then the data escaped as follows:
- *
- *    0x7D -> 0x7D 0x5D
- *    0x7E -> 0x7D 0x5E
- *    0x7F -> 0x7D 0x5F
- *
- * Then, 4 bytes of little endian (stuffed) FCS follow, then two
- * trailing EOF bytes of 0x7E.
- */
-static inline __u8 *stuff_fir(__u8 *p, __u8 c)
-{
-	switch(c) {
-	case 0x7d:
-	case 0x7e:
-	case 0x7f:
-		*p++ = 0x7d;
-		c ^= IRDA_TRANS;
-		/* fall through */
-	default:
-		*p++ = c;
-	}
-	return p;
-}
-
-/* Take raw data in skb and put it wrapped into buf */
-static unsigned wrap_fir_skb(const struct sk_buff *skb, __u8 *buf)
-{
-	__u8 *ptr = buf;
-	__u32 fcs = ~(crc32_le(~0, skb->data, skb->len));
-	__u16 wraplen;
-	int i;
-
-	/* Header */
-	buf[0] = 0x55;
-	buf[1] = 0xAA;
-
-	ptr = buf + STIR_IRDA_HEADER;
-	memset(ptr, 0x7f, 16);
-	ptr += 16;
-
-	/* BOF */
-	*ptr++  = 0x7e;
-	*ptr++  = 0x7e;
-
-	/* Address / Control / Information */
-	for (i = 0; i < skb->len; i++)
-		ptr = stuff_fir(ptr, skb->data[i]);
-
-	/* FCS */
-	ptr = stuff_fir(ptr, fcs & 0xff);
-	ptr = stuff_fir(ptr, (fcs >> 8) & 0xff);
-	ptr = stuff_fir(ptr, (fcs >> 16) & 0xff);
-	ptr = stuff_fir(ptr, (fcs >> 24) & 0xff);
-
-	/* EOFs */
-	*ptr++ = 0x7e;
-	*ptr++ = 0x7e;
-
-	/* Total length, minus the header */
-	wraplen = (ptr - buf) - STIR_IRDA_HEADER;
-	buf[2] = wraplen & 0xff;
-	buf[3] = (wraplen >> 8) & 0xff;
-
-	return wraplen + STIR_IRDA_HEADER;
-}
-
-static unsigned wrap_sir_skb(struct sk_buff *skb, __u8 *buf)
-{
-	__u16 wraplen;
-
-	wraplen = async_wrap_skb(skb, buf + STIR_IRDA_HEADER,
-				 STIR_FIFO_SIZE - STIR_IRDA_HEADER);
-	buf[0] = 0x55;
-	buf[1] = 0xAA;
-	buf[2] = wraplen & 0xff;
-	buf[3] = (wraplen >> 8) & 0xff;
-
-	return wraplen + STIR_IRDA_HEADER;
-}
-
-/*
- * Frame is fully formed in the rx_buff so check crc
- * and pass up to irlap
- * setup for next receive
- */
-static void fir_eof(struct stir_cb *stir)
-{
-	iobuff_t *rx_buff = &stir->rx_buff;
-	int len = rx_buff->len - 4;
-	struct sk_buff *skb, *nskb;
-	__u32 fcs;
-
-	if (unlikely(len <= 0)) {
-		pr_debug("%s: short frame len %d\n",
-			 stir->netdev->name, len);
-
-		++stir->netdev->stats.rx_errors;
-		++stir->netdev->stats.rx_length_errors;
-		return;
-	}
-
-	fcs = ~(crc32_le(~0, rx_buff->data, len));
-	if (fcs != get_unaligned_le32(rx_buff->data + len)) {
-		pr_debug("crc error calc 0x%x len %d\n", fcs, len);
-		stir->netdev->stats.rx_errors++;
-		stir->netdev->stats.rx_crc_errors++;
-		return;
-	}
-
-	/* if frame is short then just copy it */
-	if (len < IRDA_RX_COPY_THRESHOLD) {
-		nskb = dev_alloc_skb(len + 1);
-		if (unlikely(!nskb)) {
-			++stir->netdev->stats.rx_dropped;
-			return;
-		}
-		skb_reserve(nskb, 1);
-		skb = nskb;
-		skb_copy_to_linear_data(nskb, rx_buff->data, len);
-	} else {
-		nskb = dev_alloc_skb(rx_buff->truesize);
-		if (unlikely(!nskb)) {
-			++stir->netdev->stats.rx_dropped;
-			return;
-		}
-		skb_reserve(nskb, 1);
-		skb = rx_buff->skb;
-		rx_buff->skb = nskb;
-		rx_buff->head = nskb->data;
-	}
-
-	skb_put(skb, len);
-
-	skb_reset_mac_header(skb);
-	skb->protocol = htons(ETH_P_IRDA);
-	skb->dev = stir->netdev;
-
-	netif_rx(skb);
-
-	stir->netdev->stats.rx_packets++;
-	stir->netdev->stats.rx_bytes += len;
-
-	rx_buff->data = rx_buff->head;
-	rx_buff->len = 0;
-}
-
-/* Unwrap FIR stuffed data and bump it to IrLAP */
-static void stir_fir_chars(struct stir_cb *stir,
-			    const __u8 *bytes, int len)
-{
-	iobuff_t *rx_buff = &stir->rx_buff;
-	int	i;
-
-	for (i = 0; i < len; i++) {
-		__u8	byte = bytes[i];
-
-		switch(rx_buff->state) {
-		case OUTSIDE_FRAME:
-			/* ignore garbage till start of frame */
-			if (unlikely(byte != FIR_EOF))
-				continue;
-			/* Now receiving frame */
-			rx_buff->state = BEGIN_FRAME;
-
-			/* Time to initialize receive buffer */
-			rx_buff->data = rx_buff->head;
-			rx_buff->len = 0;
-			continue;
-
-		case LINK_ESCAPE:
-			if (byte == FIR_EOF) {
-				pr_debug("%s: got EOF after escape\n",
-					 stir->netdev->name);
-				goto frame_error;
-			}
-			rx_buff->state = INSIDE_FRAME;
-			byte ^= IRDA_TRANS;
-			break;
-
-		case BEGIN_FRAME:
-			/* ignore multiple BOF/EOF */
-			if (byte == FIR_EOF)
-				continue;
-			rx_buff->state = INSIDE_FRAME;
-			rx_buff->in_frame = TRUE;
-
-			/* fall through */
-		case INSIDE_FRAME:
-			switch(byte) {
-			case FIR_CE:
-				rx_buff->state = LINK_ESCAPE;
-				continue;
-			case FIR_XBOF:
-				/* 0x7f is not used in this framing */
-				pr_debug("%s: got XBOF without escape\n",
-					 stir->netdev->name);
-				goto frame_error;
-			case FIR_EOF:
-				rx_buff->state = OUTSIDE_FRAME;
-				rx_buff->in_frame = FALSE;
-				fir_eof(stir);
-				continue;
-			}
-			break;
-		}
-
-		/* add byte to rx buffer */
-		if (unlikely(rx_buff->len >= rx_buff->truesize)) {
-			pr_debug("%s: fir frame exceeds %d\n",
-				 stir->netdev->name, rx_buff->truesize);
-			++stir->netdev->stats.rx_over_errors;
-			goto error_recovery;
-		}
-
-		rx_buff->data[rx_buff->len++] = byte;
-		continue;
-
-	frame_error:
-		++stir->netdev->stats.rx_frame_errors;
-
-	error_recovery:
-		++stir->netdev->stats.rx_errors;
-		rx_buff->state = OUTSIDE_FRAME;
-		rx_buff->in_frame = FALSE;
-	}
-}
-
-/* Unwrap SIR stuffed data and bump it up to IrLAP */
-static void stir_sir_chars(struct stir_cb *stir,
-			    const __u8 *bytes, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		async_unwrap_char(stir->netdev, &stir->netdev->stats,
-				  &stir->rx_buff, bytes[i]);
-}
-
-static inline void unwrap_chars(struct stir_cb *stir,
-				const __u8 *bytes, int length)
-{
-	if (isfir(stir->speed))
-		stir_fir_chars(stir, bytes, length);
-	else
-		stir_sir_chars(stir, bytes, length);
-}
-
-/* Mode parameters for each speed */
-static const struct {
-	unsigned speed;
-	__u8 pdclk;
-} stir_modes[] = {
-        { 2400,    PDCLK_2400 },
-        { 9600,    PDCLK_9600 },
-        { 19200,   PDCLK_19200 },
-        { 38400,   PDCLK_38400 },
-        { 57600,   PDCLK_57600 },
-        { 115200,  PDCLK_115200 },
-        { 4000000, PDCLK_4000000 },
-};
-
-
-/*
- * Setup chip for speed.
- *  Called at startup to initialize the chip
- *  and on speed changes.
- *
- * Note: Write multiple registers doesn't appear to work
- */
-static int change_speed(struct stir_cb *stir, unsigned speed)
-{
-	int i, err;
-	__u8 mode;
-
-	for (i = 0; i < ARRAY_SIZE(stir_modes); ++i) {
-		if (speed == stir_modes[i].speed)
-			goto found;
-	}
-
-	dev_warn(&stir->netdev->dev, "invalid speed %d\n", speed);
-	return -EINVAL;
-
- found:
-	pr_debug("speed change from %d to %d\n", stir->speed, speed);
-
-	/* Reset modulator */
-	err = write_reg(stir, REG_CTRL1, CTRL1_SRESET);
-	if (err)
-		goto out;
-
-	/* Undocumented magic to tweak the DPLL */
-	err = write_reg(stir, REG_DPLL, 0x15);
-	if (err)
-		goto out;
-
-	/* Set clock */
-	err = write_reg(stir, REG_PDCLK, stir_modes[i].pdclk);
-	if (err)
-		goto out;
-
-	mode = MODE_NRESET | MODE_FASTRX;
-	if (isfir(speed))
-		mode |= MODE_FIR | MODE_FFRSTEN;
-	else
-		mode |= MODE_SIR;
-
-	if (speed == 2400)
-		mode |= MODE_2400;
-
-	err = write_reg(stir, REG_MODE, mode);
-	if (err)
-		goto out;
-
-	/* This resets TEMIC style transceiver if any. */
-	err = write_reg(stir, REG_CTRL1,
-			CTRL1_SDMODE | (tx_power & 3) << 1);
-	if (err)
-		goto out;
-
-	err = write_reg(stir, REG_CTRL1, (tx_power & 3) << 1);
-	if (err)
-		goto out;
-
-	/* Reset sensitivity */
-	err = write_reg(stir, REG_CTRL2, (rx_sensitivity & 7) << 5);
- out:
-	stir->speed = speed;
-	return err;
-}
-
-/*
- * Called from net/core when new frame is available.
- */
-static netdev_tx_t stir_hard_xmit(struct sk_buff *skb,
-					struct net_device *netdev)
-{
-	struct stir_cb *stir = netdev_priv(netdev);
-
-	netif_stop_queue(netdev);
-
-	/* the IRDA wrapping routines don't deal with non linear skb */
-	SKB_LINEAR_ASSERT(skb);
-
-	skb = xchg(&stir->tx_pending, skb);
-        wake_up_process(stir->thread);
-	
-	/* this should never happen unless stop/wakeup problem */
-	if (unlikely(skb)) {
-		WARN_ON(1);
-		dev_kfree_skb(skb);
-	}
-
-	return NETDEV_TX_OK;
-}
-
-/*
- * Wait for the transmit FIFO to have space for next data
- *
- * If space < 0 then wait till FIFO completely drains.
- * FYI: can take up to 13 seconds at 2400baud.
- */
-static int fifo_txwait(struct stir_cb *stir, int space)
-{
-	int err;
-	unsigned long count, status;
-	unsigned long prev_count = 0x1fff;
-
-	/* Read FIFO status and count */
-	for (;; prev_count = count) {
-		err = read_reg(stir, REG_FIFOCTL, stir->fifo_status, 
-				   FIFO_REGS_SIZE);
-		if (unlikely(err != FIFO_REGS_SIZE)) {
-			dev_warn(&stir->netdev->dev,
-				 "FIFO register read error: %d\n", err);
-
-			return err;
-		}
-
-		status = stir->fifo_status[0];
-		count = (unsigned)(stir->fifo_status[2] & 0x1f) << 8 
-			| stir->fifo_status[1];
-
-		pr_debug("fifo status 0x%lx count %lu\n", status, count);
-
-		/* is fifo receiving already, or empty */
-		if (!(status & FIFOCTL_DIR) ||
-		    (status & FIFOCTL_EMPTY))
-			return 0;
-
-		if (signal_pending(current))
-			return -EINTR;
-
-		/* shutting down? */
-		if (!netif_running(stir->netdev) ||
-		    !netif_device_present(stir->netdev))
-			return -ESHUTDOWN;
-
-		/* only waiting for some space */
-		if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count)
-			return 0;
-
-		/* queue confused */
-		if (prev_count < count)
-			break;
-
-		/* estimate transfer time for remaining chars */
-		msleep((count * 8000) / stir->speed);
-	}
-			
-	err = write_reg(stir, REG_FIFOCTL, FIFOCTL_CLR);
-	if (err) 
-		return err;
-	err = write_reg(stir, REG_FIFOCTL, 0);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-
-/* Wait for turnaround delay before starting transmit.  */
-static void turnaround_delay(const struct stir_cb *stir, long us)
-{
-	long ticks;
-
-	if (us <= 0)
-		return;
-
-	us -= ktime_us_delta(ktime_get(), stir->rx_time);
-
-	if (us < 10)
-		return;
-
-	ticks = us / (1000000 / HZ);
-	if (ticks > 0)
-		schedule_timeout_interruptible(1 + ticks);
-	else
-		udelay(us);
-}
-
-/*
- * Start receiver by submitting a request to the receive pipe.
- * If nothing is available it will return after rx_interval.
- */
-static int receive_start(struct stir_cb *stir)
-{
-	/* reset state */
-	stir->receiving = 1;
-
-	stir->rx_buff.in_frame = FALSE;
-	stir->rx_buff.state = OUTSIDE_FRAME;
-
-	stir->rx_urb->status = 0;
-	return usb_submit_urb(stir->rx_urb, GFP_KERNEL);
-}
-
-/* Stop all pending receive Urb's */
-static void receive_stop(struct stir_cb *stir)
-{
-	stir->receiving = 0;
-	usb_kill_urb(stir->rx_urb);
-
-	if (stir->rx_buff.in_frame) 
-		stir->netdev->stats.collisions++;
-}
-/*
- * Wrap data in socket buffer and send it.
- */
-static void stir_send(struct stir_cb *stir, struct sk_buff *skb)
-{
-	unsigned wraplen;
-	int first_frame = 0;
-
-	/* if receiving, need to turnaround */
-	if (stir->receiving) {
-		receive_stop(stir);
-		turnaround_delay(stir, irda_get_mtt(skb));
-		first_frame = 1;
-	}
-
-	if (isfir(stir->speed))
-		wraplen = wrap_fir_skb(skb, stir->io_buf);
-	else
-		wraplen = wrap_sir_skb(skb, stir->io_buf);
-		
-	/* check for space available in fifo */
-	if (!first_frame)
-		fifo_txwait(stir, wraplen);
-
-	stir->netdev->stats.tx_packets++;
-	stir->netdev->stats.tx_bytes += skb->len;
-	netif_trans_update(stir->netdev);
-	pr_debug("send %d (%d)\n", skb->len, wraplen);
-
-	if (usb_bulk_msg(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1),
-			 stir->io_buf, wraplen,
-			 NULL, TRANSMIT_TIMEOUT))
-		stir->netdev->stats.tx_errors++;
-}
-
-/*
- * Transmit state machine thread
- */
-static int stir_transmit_thread(void *arg)
-{
-	struct stir_cb *stir = arg;
-	struct net_device *dev = stir->netdev;
-	struct sk_buff *skb;
-
-        while (!kthread_should_stop()) {
-#ifdef CONFIG_PM
-		/* if suspending, then power off and wait */
-		if (unlikely(freezing(current))) {
-			if (stir->receiving)
-				receive_stop(stir);
-			else
-				fifo_txwait(stir, -1);
-
-			write_reg(stir, REG_CTRL1, CTRL1_TXPWD|CTRL1_RXPWD);
-
-			try_to_freeze();
-
-			if (change_speed(stir, stir->speed))
-				break;
-		}
-#endif
-
-		/* if something to send? */
-		skb = xchg(&stir->tx_pending, NULL);
-		if (skb) {
-			unsigned new_speed = irda_get_next_speed(skb);
-			netif_wake_queue(dev);
-
-			if (skb->len > 0)
-				stir_send(stir, skb);
-			dev_kfree_skb(skb);
-
-			if ((new_speed != -1) && (stir->speed != new_speed)) {
-				if (fifo_txwait(stir, -1) ||
-				    change_speed(stir, new_speed))
-					break;
-			}
-			continue;
-		}
-
-		/* nothing to send? start receiving */
-		if (!stir->receiving &&
-		    irda_device_txqueue_empty(dev)) {
-			/* Wait otherwise chip gets confused. */
-			if (fifo_txwait(stir, -1))
-				break;
-
-			if (unlikely(receive_start(stir))) {
-				if (net_ratelimit())
-					dev_info(&dev->dev,
-						 "%s: receive usb submit failed\n",
-						 stir->netdev->name);
-				stir->receiving = 0;
-				msleep(10);
-				continue;
-			}
-		}
-
-		/* sleep if nothing to send */
-                set_current_state(TASK_INTERRUPTIBLE);
-                schedule();
-
-	}
-        return 0;
-}
-
-
-/*
- * USB bulk receive completion callback.
- * Wakes up every ms (usb round trip) with wrapped 
- * data.
- */
-static void stir_rcv_irq(struct urb *urb)
-{
-	struct stir_cb *stir = urb->context;
-	int err;
-
-	/* in process of stopping, just drop data */
-	if (!netif_running(stir->netdev))
-		return;
-
-	/* unlink, shutdown, unplug, other nasties */
-	if (urb->status != 0) 
-		return;
-
-	if (urb->actual_length > 0) {
-		pr_debug("receive %d\n", urb->actual_length);
-		unwrap_chars(stir, urb->transfer_buffer,
-			     urb->actual_length);
-
-		stir->rx_time = ktime_get();
-	}
-
-	/* kernel thread is stopping receiver don't resubmit */
-	if (!stir->receiving)
-		return;
-
-	/* resubmit existing urb */
-	err = usb_submit_urb(urb, GFP_ATOMIC);
-
-	/* in case of error, the kernel thread will restart us */
-	if (err) {
-		dev_warn(&stir->netdev->dev, "usb receive submit error: %d\n",
-			 err);
-		stir->receiving = 0;
-		wake_up_process(stir->thread);
-	}
-}
-
-/*
- * Function stir_net_open (dev)
- *
- *    Network device is taken up. Usually this is done by "ifconfig irda0 up"
- */
-static int stir_net_open(struct net_device *netdev)
-{
-	struct stir_cb *stir = netdev_priv(netdev);
-	int err;
-	char hwname[16];
-
-	err = usb_clear_halt(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1));
-	if (err)
-		goto err_out1;
-	err = usb_clear_halt(stir->usbdev, usb_rcvbulkpipe(stir->usbdev, 2));
-	if (err)
-		goto err_out1;
-
-	err = change_speed(stir, 9600);
-	if (err)
-		goto err_out1;
-
-	err = -ENOMEM;
-
-	/* Initialize for SIR/FIR to copy data directly into skb.  */
-	stir->receiving = 0;
-	stir->rx_buff.truesize = IRDA_SKB_MAX_MTU;
-	stir->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
-	if (!stir->rx_buff.skb) 
-		goto err_out1;
-
-	skb_reserve(stir->rx_buff.skb, 1);
-	stir->rx_buff.head = stir->rx_buff.skb->data;
-	stir->rx_time = ktime_get();
-
-	stir->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!stir->rx_urb) 
-		goto err_out2;
-
-	stir->io_buf = kmalloc(STIR_FIFO_SIZE, GFP_KERNEL);
-	if (!stir->io_buf)
-		goto err_out3;
-
-	usb_fill_bulk_urb(stir->rx_urb, stir->usbdev,
-			  usb_rcvbulkpipe(stir->usbdev, 2),
-			  stir->io_buf, STIR_FIFO_SIZE,
-			  stir_rcv_irq, stir);
-
-	stir->fifo_status = kmalloc(FIFO_REGS_SIZE, GFP_KERNEL);
-	if (!stir->fifo_status) 
-		goto err_out4;
-		
-	/*
-	 * Now that everything should be initialized properly,
-	 * Open new IrLAP layer instance to take care of us...
-	 * Note : will send immediately a speed change...
-	 */
-	sprintf(hwname, "usb#%d", stir->usbdev->devnum);
-	stir->irlap = irlap_open(netdev, &stir->qos, hwname);
-	if (!stir->irlap) {
-		dev_err(&stir->usbdev->dev, "irlap_open failed\n");
-		goto err_out5;
-	}
-
-	/** Start kernel thread for transmit.  */
-	stir->thread = kthread_run(stir_transmit_thread, stir,
-				   "%s", stir->netdev->name);
-        if (IS_ERR(stir->thread)) {
-                err = PTR_ERR(stir->thread);
-		dev_err(&stir->usbdev->dev, "unable to start kernel thread\n");
-		goto err_out6;
-	}
-
-	netif_start_queue(netdev);
-
-	return 0;
-
- err_out6:
-	irlap_close(stir->irlap);
- err_out5:
-	kfree(stir->fifo_status);
- err_out4:
-	kfree(stir->io_buf);
- err_out3:
-	usb_free_urb(stir->rx_urb);
- err_out2:
-	kfree_skb(stir->rx_buff.skb);
- err_out1:
-	return err;
-}
-
-/*
- * Function stir_net_close (stir)
- *
- *    Network device is taken down. Usually this is done by
- *    "ifconfig irda0 down"
- */
-static int stir_net_close(struct net_device *netdev)
-{
-	struct stir_cb *stir = netdev_priv(netdev);
-
-	/* Stop transmit processing */
-	netif_stop_queue(netdev);
-
-	/* Kill transmit thread */
-	kthread_stop(stir->thread);
-	kfree(stir->fifo_status);
-
-	/* Mop up receive urb's */
-	usb_kill_urb(stir->rx_urb);
-	
-	kfree(stir->io_buf);
-	usb_free_urb(stir->rx_urb);
-	kfree_skb(stir->rx_buff.skb);
-
-	/* Stop and remove instance of IrLAP */
-	if (stir->irlap)
-		irlap_close(stir->irlap);
-
-	stir->irlap = NULL;
-
-	return 0;
-}
-
-/*
- * IOCTLs : Extra out-of-band network commands...
- */
-static int stir_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
-{
-	struct if_irda_req *irq = (struct if_irda_req *) rq;
-	struct stir_cb *stir = netdev_priv(netdev);
-	int ret = 0;
-
-	switch (cmd) {
-	case SIOCSBANDWIDTH: /* Set bandwidth */
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-
-		/* Check if the device is still there */
-		if (netif_device_present(stir->netdev))
-			ret = change_speed(stir, irq->ifr_baudrate);
-		break;
-
-	case SIOCSMEDIABUSY: /* Set media busy */
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-
-		/* Check if the IrDA stack is still there */
-		if (netif_running(stir->netdev))
-			irda_device_set_media_busy(stir->netdev, TRUE);
-		break;
-
-	case SIOCGRECEIVING:
-		/* Only approximately true */
-		irq->ifr_receiving = stir->receiving;
-		break;
-
-	default:
-		ret = -EOPNOTSUPP;
-	}
-
-	return ret;
-}
-
-static const struct net_device_ops stir_netdev_ops = {
-	.ndo_open       = stir_net_open,
-	.ndo_stop       = stir_net_close,
-	.ndo_start_xmit = stir_hard_xmit,
-	.ndo_do_ioctl   = stir_net_ioctl,
-};
-
-/*
- * This routine is called by the USB subsystem for each new device
- * in the system. We need to check if the device is ours, and in
- * this case start handling it.
- * Note : it might be worth protecting this function by a global
- * spinlock... Or not, because maybe USB already deal with that...
- */
-static int stir_probe(struct usb_interface *intf,
-		      const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct stir_cb *stir = NULL;
-	struct net_device *net;
-	int ret = -ENOMEM;
-
-	/* Allocate network device container. */
-	net = alloc_irdadev(sizeof(*stir));
-	if(!net)
-		goto err_out1;
-
-	SET_NETDEV_DEV(net, &intf->dev);
-	stir = netdev_priv(net);
-	stir->netdev = net;
-	stir->usbdev = dev;
-
-	ret = usb_reset_configuration(dev);
-	if (ret != 0) {
-		dev_err(&intf->dev, "usb reset configuration failed\n");
-		goto err_out2;
-	}
-
-	printk(KERN_INFO "SigmaTel STIr4200 IRDA/USB found at address %d, "
-		"Vendor: %x, Product: %x\n",
-	       dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
-	       le16_to_cpu(dev->descriptor.idProduct));
-
-	/* Initialize QoS for this device */
-	irda_init_max_qos_capabilies(&stir->qos);
-
-	/* That's the Rx capability. */
-	stir->qos.baud_rate.bits       &= IR_2400 | IR_9600 | IR_19200 |
-					 IR_38400 | IR_57600 | IR_115200 |
-					 (IR_4000000 << 8);
-	stir->qos.min_turn_time.bits   &= qos_mtt_bits;
-	irda_qos_bits_to_value(&stir->qos);
-
-	/* Override the network functions we need to use */
-	net->netdev_ops = &stir_netdev_ops;
-
-	ret = register_netdev(net);
-	if (ret != 0)
-		goto err_out2;
-
-	dev_info(&intf->dev, "IrDA: Registered SigmaTel device %s\n",
-		 net->name);
-
-	usb_set_intfdata(intf, stir);
-
-	return 0;
-
-err_out2:
-	free_netdev(net);
-err_out1:
-	return ret;
-}
-
-/*
- * The current device is removed, the USB layer tell us to shut it down...
- */
-static void stir_disconnect(struct usb_interface *intf)
-{
-	struct stir_cb *stir = usb_get_intfdata(intf);
-
-	if (!stir)
-		return;
-
-	unregister_netdev(stir->netdev);
-	free_netdev(stir->netdev);
-
-	usb_set_intfdata(intf, NULL);
-}
-
-#ifdef CONFIG_PM
-/* USB suspend, so power off the transmitter/receiver */
-static int stir_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct stir_cb *stir = usb_get_intfdata(intf);
-
-	netif_device_detach(stir->netdev);
-	return 0;
-}
-
-/* Coming out of suspend, so reset hardware */
-static int stir_resume(struct usb_interface *intf)
-{
-	struct stir_cb *stir = usb_get_intfdata(intf);
-
-	netif_device_attach(stir->netdev);
-
-	/* receiver restarted when send thread wakes up */
-	return 0;
-}
-#endif
-
-/*
- * USB device callbacks
- */
-static struct usb_driver irda_driver = {
-	.name		= "stir4200",
-	.probe		= stir_probe,
-	.disconnect	= stir_disconnect,
-	.id_table	= dongles,
-#ifdef CONFIG_PM
-	.suspend	= stir_suspend,
-	.resume		= stir_resume,
-#endif
-};
-
-module_usb_driver(irda_driver);