Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (150 commits)
  [PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2
  [PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.h
  [PATCH] ipw2100: semaphore to mutexes conversion
  [PATCH] ipw2100: Fix radiotap code gcc warning
  [PATCH] ipw2100: add radiotap headers to packtes captured in monitor mode
  [PATCH] ipw2x00: expend Copyright to 2006
  [PATCH] drivers/net/wireless/ipw2200.c: fix an array overun
  [PATCH] ieee80211: Don't update network statistics from off-channel packets.
  [PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1
  [PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format
  [PATCH] ipw2200: wireless extension sensitivity threshold support
  [PATCH] ipw2200: Enables the "slow diversity" algorithm
  [PATCH] ipw2200: Set a meaningful silence threshold value
  [PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG
  [PATCH] ipw2200: Change debug level for firmware error logging
  [PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode
  [PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment
  [PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1'
  [PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking
  [PATCH] ipw2200: Add signal level to iwlist scan output
  ...

1 files changed, 141 insertions, 51 deletions

diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 9d6d2548c2d3..8d4999837b65 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -3,6 +3,7 @@
 	Written/copyright 1999-2001 by Donald Becker.
 	Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com)
 	Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com)
+	Portions copyright 2004 Harald Welte <laforge@gnumonks.org>
 
 	This software may be used and distributed according to the terms of
 	the GNU General Public License (GPL), incorporated herein by reference.
@@ -135,8 +136,6 @@
 
 	TODO:
 	* big endian support with CFG:BEM instead of cpu_to_le32
-	* support for an external PHY
-	* NAPI
 */
 
 #include <linux/config.h>
@@ -160,6 +159,7 @@
 #include <linux/mii.h>
 #include <linux/crc32.h>
 #include <linux/bitops.h>
+#include <linux/prefetch.h>
 #include <asm/processor.h>	/* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -183,13 +183,11 @@
 				 NETIF_MSG_TX_ERR)
 static int debug = -1;
 
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
 static int mtu;
 
 /* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
    This chip uses a 512 element hash table based on the Ethernet CRC.  */
-static int multicast_filter_limit = 100;
+static const int multicast_filter_limit = 100;
 
 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
    Setting to > 1518 effectively disables this feature. */
@@ -251,14 +249,11 @@ MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
 MODULE_LICENSE("GPL");
 
-module_param(max_interrupt_work, int, 0);
 module_param(mtu, int, 0);
 module_param(debug, int, 0);
 module_param(rx_copybreak, int, 0);
 module_param_array(options, int, NULL, 0);
 module_param_array(full_duplex, int, NULL, 0);
-MODULE_PARM_DESC(max_interrupt_work, 
-	"DP8381x maximum events handled per interrupt");
 MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
 MODULE_PARM_DESC(debug, "DP8381x default debug level");
 MODULE_PARM_DESC(rx_copybreak, 
@@ -374,7 +369,7 @@ enum pcistuff {
 
  
 /* array of board data directly indexed by pci_tbl[x].driver_data */
-static struct {
+static const struct {
 	const char *name;
 	unsigned long flags;
 } natsemi_pci_info[] __devinitdata = {
@@ -691,6 +686,8 @@ struct netdev_private {
 	/* Based on MTU+slack. */
 	unsigned int rx_buf_sz;
 	int oom;
+	/* Interrupt status */
+	u32 intr_status;
 	/* Do not touch the nic registers */
 	int hands_off;
 	/* external phy that is used: only valid if dev->if_port != PORT_TP */
@@ -748,7 +745,8 @@ static void init_registers(struct net_device *dev);
 static int start_tx(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs);
 static void netdev_error(struct net_device *dev, int intr_status);
-static void netdev_rx(struct net_device *dev);
+static int natsemi_poll(struct net_device *dev, int *budget);
+static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do);
 static void netdev_tx_done(struct net_device *dev);
 static int natsemi_change_mtu(struct net_device *dev, int new_mtu);
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -776,6 +774,18 @@ static inline void __iomem *ns_ioaddr(struct net_device *dev)
 	return (void __iomem *) dev->base_addr;
 }
 
+static inline void natsemi_irq_enable(struct net_device *dev)
+{
+	writel(1, ns_ioaddr(dev) + IntrEnable);
+	readl(ns_ioaddr(dev) + IntrEnable);
+}
+
+static inline void natsemi_irq_disable(struct net_device *dev)
+{
+	writel(0, ns_ioaddr(dev) + IntrEnable);
+	readl(ns_ioaddr(dev) + IntrEnable);
+}
+
 static void move_int_phy(struct net_device *dev, int addr)
 {
 	struct netdev_private *np = netdev_priv(dev);
@@ -879,6 +889,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
 	spin_lock_init(&np->lock);
 	np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG;
 	np->hands_off = 0;
+	np->intr_status = 0;
 
 	/* Initial port:
 	 * - If the nic was configured to use an external phy and if find_mii
@@ -932,6 +943,9 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
 	dev->do_ioctl = &netdev_ioctl;
 	dev->tx_timeout = &tx_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
+	dev->poll = natsemi_poll;
+	dev->weight = 64;
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = &natsemi_poll_controller;
 #endif
@@ -1484,6 +1498,31 @@ static void natsemi_reset(struct net_device *dev)
 	writel(rfcr, ioaddr + RxFilterAddr);
 }
 
+static void reset_rx(struct net_device *dev)
+{
+	int i;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	np->intr_status &= ~RxResetDone;
+
+	writel(RxReset, ioaddr + ChipCmd);
+
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+		np->intr_status |= readl(ioaddr + IntrStatus);
+		if (np->intr_status & RxResetDone)
+			break;
+		udelay(15);
+	}
+	if (i==NATSEMI_HW_TIMEOUT) {
+		printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n",
+		       dev->name, i*15);
+	} else if (netif_msg_hw(np)) {
+		printk(KERN_WARNING "%s: RX reset took %d usec.\n",
+		       dev->name, i*15);
+	}
+}
+
 static void natsemi_reload_eeprom(struct net_device *dev)
 {
 	struct netdev_private *np = netdev_priv(dev);
@@ -2158,68 +2197,92 @@ static void netdev_tx_done(struct net_device *dev)
 	}
 }
 
-/* The interrupt handler does all of the Rx thread work and cleans up
-   after the Tx thread. */
+/* The interrupt handler doesn't actually handle interrupts itself, it
+ * schedules a NAPI poll if there is anything to do. */
 static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs)
 {
 	struct net_device *dev = dev_instance;
 	struct netdev_private *np = netdev_priv(dev);
 	void __iomem * ioaddr = ns_ioaddr(dev);
-	int boguscnt = max_interrupt_work;
-	unsigned int handled = 0;
 
 	if (np->hands_off)
 		return IRQ_NONE;
-	do {
-		/* Reading automatically acknowledges all int sources. */
-		u32 intr_status = readl(ioaddr + IntrStatus);
+	
+	/* Reading automatically acknowledges. */
+	np->intr_status = readl(ioaddr + IntrStatus);
 
-		if (netif_msg_intr(np))
-			printk(KERN_DEBUG
-				"%s: Interrupt, status %#08x, mask %#08x.\n",
-				dev->name, intr_status,
-				readl(ioaddr + IntrMask));
+	if (netif_msg_intr(np))
+		printk(KERN_DEBUG
+		       "%s: Interrupt, status %#08x, mask %#08x.\n",
+		       dev->name, np->intr_status,
+		       readl(ioaddr + IntrMask));
 
-		if (intr_status == 0)
-			break;
-		handled = 1;
+	if (!np->intr_status) 
+		return IRQ_NONE;
 
-		if (intr_status &
-		   (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
-		    IntrRxErr | IntrRxOverrun)) {
-			netdev_rx(dev);
-		}
+	prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]);
 
-		if (intr_status &
-		   (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
+	if (netif_rx_schedule_prep(dev)) {
+		/* Disable interrupts and register for poll */
+		natsemi_irq_disable(dev);
+		__netif_rx_schedule(dev);
+	}
+	return IRQ_HANDLED;
+}
+
+/* This is the NAPI poll routine.  As well as the standard RX handling
+ * it also handles all other interrupts that the chip might raise.
+ */
+static int natsemi_poll(struct net_device *dev, int *budget)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	int work_to_do = min(*budget, dev->quota);
+	int work_done = 0;
+
+	do {
+		if (np->intr_status &
+		    (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
 			spin_lock(&np->lock);
 			netdev_tx_done(dev);
 			spin_unlock(&np->lock);
 		}
 
 		/* Abnormal error summary/uncommon events handlers. */
-		if (intr_status & IntrAbnormalSummary)
-			netdev_error(dev, intr_status);
-
-		if (--boguscnt < 0) {
-			if (netif_msg_intr(np))
-				printk(KERN_WARNING
-					"%s: Too much work at interrupt, "
-					"status=%#08x.\n",
-					dev->name, intr_status);
-			break;
+		if (np->intr_status & IntrAbnormalSummary)
+			netdev_error(dev, np->intr_status);
+		
+		if (np->intr_status &
+		    (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
+		     IntrRxErr | IntrRxOverrun)) {
+			netdev_rx(dev, &work_done, work_to_do);
 		}
-	} while (1);
+		
+		*budget -= work_done;
+		dev->quota -= work_done;
 
-	if (netif_msg_intr(np))
-		printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name);
+		if (work_done >= work_to_do)
+			return 1;
+
+		np->intr_status = readl(ioaddr + IntrStatus);
+	} while (np->intr_status);
+
+	netif_rx_complete(dev);
 
-	return IRQ_RETVAL(handled);
+	/* Reenable interrupts providing nothing is trying to shut
+	 * the chip down. */
+	spin_lock(&np->lock);
+	if (!np->hands_off && netif_running(dev))
+		natsemi_irq_enable(dev);
+	spin_unlock(&np->lock);
+
+	return 0;
 }
 
 /* This routine is logically part of the interrupt handler, but separated
    for clarity and better register allocation. */
-static void netdev_rx(struct net_device *dev)
+static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do)
 {
 	struct netdev_private *np = netdev_priv(dev);
 	int entry = np->cur_rx % RX_RING_SIZE;
@@ -2237,6 +2300,12 @@ static void netdev_rx(struct net_device *dev)
 				entry, desc_status);
 		if (--boguscnt < 0)
 			break;
+
+		if (*work_done >= work_to_do)
+			break;
+
+		(*work_done)++;
+
 		pkt_len = (desc_status & DescSizeMask) - 4;
 		if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){
 			if (desc_status & DescMore) {
@@ -2248,6 +2317,23 @@ static void netdev_rx(struct net_device *dev)
 						"status %#08x.\n", dev->name,
 						np->cur_rx, desc_status);
 				np->stats.rx_length_errors++;
+
+				/* The RX state machine has probably
+				 * locked up beneath us.  Follow the
+				 * reset procedure documented in
+				 * AN-1287. */
+
+				spin_lock_irq(&np->lock);
+				reset_rx(dev);
+				reinit_rx(dev);
+				writel(np->ring_dma, ioaddr + RxRingPtr);
+				check_link(dev);
+				spin_unlock_irq(&np->lock);
+
+				/* We'll enable RX on exit from this
+				 * function. */
+				break;
+
 			} else {
 				/* There was an error. */
 				np->stats.rx_errors++;
@@ -2293,7 +2379,7 @@ static void netdev_rx(struct net_device *dev)
 				np->rx_skbuff[entry] = NULL;
 			}
 			skb->protocol = eth_type_trans(skb, dev);
-			netif_rx(skb);
+			netif_receive_skb(skb);
 			dev->last_rx = jiffies;
 			np->stats.rx_packets++;
 			np->stats.rx_bytes += pkt_len;
@@ -3074,9 +3160,7 @@ static int netdev_close(struct net_device *dev)
 	del_timer_sync(&np->timer);
 	disable_irq(dev->irq);
 	spin_lock_irq(&np->lock);
-	/* Disable interrupts, and flush posted writes */
-	writel(0, ioaddr + IntrEnable);
-	readl(ioaddr + IntrEnable);
+	natsemi_irq_disable(dev);
 	np->hands_off = 1;
 	spin_unlock_irq(&np->lock);
 	enable_irq(dev->irq);
@@ -3158,6 +3242,9 @@ static void __devexit natsemi_remove1 (struct pci_dev *pdev)
  *	* netdev_timer: timer stopped by natsemi_suspend.
  *	* intr_handler: doesn't acquire the spinlock. suspend calls
  *		disable_irq() to enforce synchronization.
+ *      * natsemi_poll: checks before reenabling interrupts.  suspend
+ *              sets hands_off, disables interrupts and then waits with
+ *              netif_poll_disable().
  *
  * Interrupts must be disabled, otherwise hands_off can cause irq storms.
  */
@@ -3183,6 +3270,8 @@ static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state)
 		spin_unlock_irq(&np->lock);
 		enable_irq(dev->irq);
 
+		netif_poll_disable(dev);
+
 		/* Update the error counts. */
 		__get_stats(dev);
 
@@ -3235,6 +3324,7 @@ static int natsemi_resume (struct pci_dev *pdev)
 		mod_timer(&np->timer, jiffies + 1*HZ);
 	}
 	netif_device_attach(dev);
+	netif_poll_enable(dev);
 out:
 	rtnl_unlock();
 	return 0;