Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a999 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...

1 files changed, 88 insertions, 40 deletions

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 45cbc10de01c..1f7091b3c27c 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -27,15 +27,22 @@
 #define AT803X_MMD_ACCESS_CONTROL		0x0D
 #define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
 #define AT803X_FUNC_DATA			0x4003
+#define AT803X_DEBUG_ADDR			0x1D
+#define AT803X_DEBUG_DATA			0x1E
+#define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
+#define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
 
 MODULE_DESCRIPTION("Atheros 803x PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
 
-static void at803x_set_wol_mac_addr(struct phy_device *phydev)
+static int at803x_set_wol(struct phy_device *phydev,
+			  struct ethtool_wolinfo *wol)
 {
 	struct net_device *ndev = phydev->attached_dev;
 	const u8 *mac;
+	int ret;
+	u32 value;
 	unsigned int i, offsets[] = {
 		AT803X_LOC_MAC_ADDR_32_47_OFFSET,
 		AT803X_LOC_MAC_ADDR_16_31_OFFSET,
@@ -43,30 +50,61 @@ static void at803x_set_wol_mac_addr(struct phy_device *phydev)
 	};
 
 	if (!ndev)
-		return;
+		return -ENODEV;
 
-	mac = (const u8 *) ndev->dev_addr;
+	if (wol->wolopts & WAKE_MAGIC) {
+		mac = (const u8 *) ndev->dev_addr;
 
-	if (!is_valid_ether_addr(mac))
-		return;
+		if (!is_valid_ether_addr(mac))
+			return -EFAULT;
 
-	for (i = 0; i < 3; i++) {
-		phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+		for (i = 0; i < 3; i++) {
+			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
 				  AT803X_DEVICE_ADDR);
-		phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
 				  offsets[i]);
-		phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
 				  AT803X_FUNC_DATA);
-		phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
 				  mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+		}
+
+		value = phy_read(phydev, AT803X_INTR_ENABLE);
+		value |= AT803X_WOL_ENABLE;
+		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+		if (ret)
+			return ret;
+		value = phy_read(phydev, AT803X_INTR_STATUS);
+	} else {
+		value = phy_read(phydev, AT803X_INTR_ENABLE);
+		value &= (~AT803X_WOL_ENABLE);
+		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+		if (ret)
+			return ret;
+		value = phy_read(phydev, AT803X_INTR_STATUS);
 	}
+
+	return ret;
+}
+
+static void at803x_get_wol(struct phy_device *phydev,
+			   struct ethtool_wolinfo *wol)
+{
+	u32 value;
+
+	wol->supported = WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+	if (value & AT803X_WOL_ENABLE)
+		wol->wolopts |= WAKE_MAGIC;
 }
 
 static int at803x_config_init(struct phy_device *phydev)
 {
 	int val;
+	int ret;
 	u32 features;
-	int status;
 
 	features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI |
 		   SUPPORTED_FIBRE | SUPPORTED_BNC;
@@ -100,20 +138,29 @@ static int at803x_config_init(struct phy_device *phydev)
 	phydev->supported = features;
 	phydev->advertising = features;
 
-	/* enable WOL */
-	at803x_set_wol_mac_addr(phydev);
-	status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE);
-	status = phy_read(phydev, AT803X_INTR_STATUS);
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		ret = phy_write(phydev, AT803X_DEBUG_ADDR,
+				AT803X_DEBUG_SYSTEM_MODE_CTRL);
+		if (ret)
+			return ret;
+		ret = phy_write(phydev, AT803X_DEBUG_DATA,
+				AT803X_DEBUG_RGMII_TX_CLK_DLY);
+		if (ret)
+			return ret;
+	}
 
 	return 0;
 }
 
-/* ATHEROS 8035 */
-static struct phy_driver at8035_driver = {
+static struct phy_driver at803x_driver[] = {
+{
+	/* ATHEROS 8035 */
 	.phy_id		= 0x004dd072,
 	.name		= "Atheros 8035 ethernet",
 	.phy_id_mask	= 0xffffffef,
 	.config_init	= at803x_config_init,
+	.set_wol	= at803x_set_wol,
+	.get_wol	= at803x_get_wol,
 	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.config_aneg	= &genphy_config_aneg,
@@ -121,14 +168,14 @@ static struct phy_driver at8035_driver = {
 	.driver		= {
 		.owner = THIS_MODULE,
 	},
-};
-
-/* ATHEROS 8030 */
-static struct phy_driver at8030_driver = {
+}, {
+	/* ATHEROS 8030 */
 	.phy_id		= 0x004dd076,
 	.name		= "Atheros 8030 ethernet",
 	.phy_id_mask	= 0xffffffef,
 	.config_init	= at803x_config_init,
+	.set_wol	= at803x_set_wol,
+	.get_wol	= at803x_get_wol,
 	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.config_aneg	= &genphy_config_aneg,
@@ -136,32 +183,33 @@ static struct phy_driver at8030_driver = {
 	.driver		= {
 		.owner = THIS_MODULE,
 	},
-};
+}, {
+	/* ATHEROS 8031 */
+	.phy_id		= 0x004dd074,
+	.name		= "Atheros 8031 ethernet",
+	.phy_id_mask	= 0xffffffef,
+	.config_init	= at803x_config_init,
+	.set_wol	= at803x_set_wol,
+	.get_wol	= at803x_get_wol,
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.driver		= {
+		.owner = THIS_MODULE,
+	},
+} };
 
 static int __init atheros_init(void)
 {
-	int ret;
-
-	ret = phy_driver_register(&at8035_driver);
-	if (ret)
-		goto err1;
-
-	ret = phy_driver_register(&at8030_driver);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	phy_driver_unregister(&at8035_driver);
-err1:
-	return ret;
+	return phy_drivers_register(at803x_driver,
+				    ARRAY_SIZE(at803x_driver));
 }
 
 static void __exit atheros_exit(void)
 {
-	phy_driver_unregister(&at8035_driver);
-	phy_driver_unregister(&at8030_driver);
+	return phy_drivers_unregister(at803x_driver,
+				      ARRAY_SIZE(at803x_driver));
 }
 
 module_init(atheros_init);