summaryrefslogtreecommitdiffstats
path: root/drivers/net/sky2.h
diff options
context:
space:
mode:
authorstephen hemminger <shemminger@vyatta.com>2011-07-07 05:50:59 +0000
committerDavid S. Miller <davem@davemloft.net>2011-07-08 08:53:33 -0700
commit4fb99cd6ac4fe6d03a334a6f4ebb2bbfc4b479ed (patch)
tree498e9caf1f989f161e1d4f30f5df7f6d97a68731 /drivers/net/sky2.h
parent8e11680f5e1abc85298c12a99e2b741249eadc0c (diff)
downloadlinux-4fb99cd6ac4fe6d03a334a6f4ebb2bbfc4b479ed.tar.gz
linux-4fb99cd6ac4fe6d03a334a6f4ebb2bbfc4b479ed.tar.bz2
linux-4fb99cd6ac4fe6d03a334a6f4ebb2bbfc4b479ed.zip
sky2: support for new Optima chipsets (EXPERIMENTAL)
This is a backport from the vendor driver of support for the newer Optima (Prime and 2) chipsets. It also includes some setup changes for the current Optima chip as well. The code and comments intentionally mirror the vendor sk98lin driver to allow for easier maintenance. Although this adds support for new chip id's, these chip id's are not used by any of the current PCI device id's listed in the driver. The patch is just to get initial infrastructure in place to handle them when they come. I don't have access to any of this hardware to actually test it yet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/sky2.h')
-rw-r--r--drivers/net/sky2.h8
1 files changed, 6 insertions, 2 deletions
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 530378a66021..0af31b8b5f10 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -412,7 +412,7 @@ enum {
Y2_IS_HW_ERR = 1<<31, /* Interrupt HW Error */
Y2_IS_STAT_BMU = 1<<30, /* Status BMU Interrupt */
Y2_IS_ASF = 1<<29, /* ASF subsystem Interrupt */
-
+ Y2_IS_CPU_TO = 1<<28, /* CPU Timeout */
Y2_IS_POLL_CHK = 1<<27, /* Check IRQ from polling unit */
Y2_IS_TWSI_RDY = 1<<26, /* IRQ on end of TWSI Tx */
Y2_IS_IRQ_SW = 1<<25, /* SW forced IRQ */
@@ -547,6 +547,8 @@ enum {
CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
CHIP_ID_YUKON_UL_2 = 0xba, /* YUKON-2 Ultra 2 */
CHIP_ID_YUKON_OPT = 0xbc, /* YUKON-2 Optima */
+ CHIP_ID_YUKON_PRM = 0xbd, /* YUKON-2 Optima Prime */
+ CHIP_ID_YUKON_OP_2 = 0xbe, /* YUKON-2 Optima 2 */
};
enum yukon_xl_rev {
@@ -1420,8 +1422,10 @@ enum {
PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */
PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */
PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */
- PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */};
+ PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */
+ PHY_M_10B_TE_ENABLE = 1<<7, /* 10Base-Te Enable (88E8079 and above) */
+};
#define PHY_M_EC_M_DSC(x) ((u16)(x)<<10 & PHY_M_EC_M_DSC_MSK)
/* 00=1x; 01=2x; 10=3x; 11=4x */
#define PHY_M_EC_S_DSC(x) ((u16)(x)<<8 & PHY_M_EC_S_DSC_MSK)