[netdrvr] Remove Linux-specific changelogs from several Becker template drivers

When in-kernel net drivers branched from Donald Becker's vanilla driver
set, in the days before BitKeeper and git, a driver changelog was
maintained in the driver source code.  These days, the kernel's
changelog is far superior and much more accurate, so the in-driver
changelogs are removed.

Another relic of the Becker/kernel split was version numbering, using
"foo-LKx.y.z" notation, resulting in weird version numbers like
"1.17b-LK1.1.9".  These drivers are for older hardware, and see few
changes these days, so the version numbers were all bumped to something
more simple.

Finally, in xircom_tulip_cb specifically, an additional cleanup removes
the always-enabled CARDBUS cpp macro.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 3 insertions, 81 deletions

diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 643fceae3db5..de6645196657 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -16,91 +16,13 @@
 
 	Support and updates available at
 	http://www.scyld.com/network/sundance.html
+	[link no longer provides useful info -jgarzik]
 
-
-	Version LK1.01a (jgarzik):
-	- Replace some MII-related magic numbers with constants
-
-	Version LK1.02 (D-Link):
-	- Add new board to PCI ID list
-	- Fix multicast bug
-
-	Version LK1.03 (D-Link):
-	- New Rx scheme, reduce Rx congestion
-	- Option to disable flow control
-
-	Version LK1.04 (D-Link):
-	- Tx timeout recovery
-	- More support for ethtool.
-
-	Version LK1.04a:
-	- Remove unused/constant members from struct pci_id_info
-	(which then allows removal of 'drv_flags' from private struct)
-	(jgarzik)
-	- If no phy is found, fail to load that board (jgarzik)
-	- Always start phy id scan at id 1 to avoid problems (Donald Becker)
-	- Autodetect where mii_preable_required is needed,
-	default to not needed.  (Donald Becker)
-
-	Version LK1.04b:
-	- Remove mii_preamble_required module parameter (Donald Becker)
-	- Add per-interface mii_preamble_required (setting is autodetected)
-	  (Donald Becker)
-	- Remove unnecessary cast from void pointer (jgarzik)
-	- Re-align comments in private struct (jgarzik)
-
-	Version LK1.04c (jgarzik):
-	- Support bitmapped message levels (NETIF_MSG_xxx), and the
-	  two ethtool ioctls that get/set them
-	- Don't hand-code MII ethtool support, use standard API/lib
-
-	Version LK1.04d:
-	- Merge from Donald Becker's sundance.c: (Jason Lunz)
-		* proper support for variably-sized MTUs
-		* default to PIO, to fix chip bugs
-	- Add missing unregister_netdev (Jason Lunz)
-	- Add CONFIG_SUNDANCE_MMIO config option (jgarzik)
-	- Better rx buf size calculation (Donald Becker)
-
-	Version LK1.05 (D-Link):
-	- Fix DFE-580TX packet drop issue (for DL10050C)
-	- Fix reset_tx logic
-
-	Version LK1.06 (D-Link):
-	- Fix crash while unloading driver
-
-	Versin LK1.06b (D-Link):
-	- New tx scheme, adaptive tx_coalesce
-	
-	Version LK1.07 (D-Link):
-	- Fix tx bugs in big-endian machines
-	- Remove unused max_interrupt_work module parameter, the new 
-	  NAPI-like rx scheme doesn't need it.
-	- Remove redundancy get_stats() in intr_handler(), those 
-	  I/O access could affect performance in ARM-based system
-	- Add Linux software VLAN support
-	
-	Version LK1.08 (Philippe De Muyter phdm@macqel.be):
-	- Fix bug of custom mac address 
-	(StationAddr register only accept word write) 
-
-	Version LK1.09 (D-Link):
-	- Fix the flowctrl bug.	
-	- Set Pause bit in MII ANAR if flow control enabled.	
-
-	Version LK1.09a (ICPlus):
-	- Add the delay time in reading the contents of EEPROM
-
-	Version LK1.10 (Philippe De Muyter phdm@macqel.be):
-	- Make 'unblock interface after Tx underrun' work
-
-	Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com):
-	- Add support for IC Plus Corporation IP100A chipset
 */
 
 #define DRV_NAME	"sundance"
-#define DRV_VERSION	"1.01+LK1.11"
-#define DRV_RELDATE	"14-Jun-2006"
+#define DRV_VERSION	"1.1"
+#define DRV_RELDATE	"27-Jun-2006"
 
 
 /* The user-configurable values.