iwlwifi: DMA fixes

A few issues wrt DMA were uncovered when using the driver with swiotlb.
- driver should not use memory after it has been mapped
- iwl3945's RX queue management cannot use all of iwlagn because
  the size of the RX buffer is different. Revert back to using
  iwl3945 specific routines that map/unmap memory.
- no need to "dma_syn_single_range_for_cpu" followed by pci_unmap_single,
  we can just call pci_unmap_single initially
- only map the memory area that will be used by device. this is especially
  relevant to the mapping of iwl_cmd. we should not map the entire
  structure because the meta data at the beginning of structure contains
  the address to be used later for unmapping. If the address to be used for
  unmapping is stored in mapped data it creates a problem.
- ensure that _if_ memory needs to be modified after it is mapped that we
  call _sync_single_for_cpu first, and then release it back to device with
  _sync_single_for_device
- we mapped the wrong length of data for host commands, with mapped length
  differing with length provided to device, fix that.

Thanks to Jason Andryuk <jandryuk@gmail.com> for significant bisecting
help to find these issues.

This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1964

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Tested-by: Ben Gamari <bgamari@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 103 insertions, 45 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index acefc3721267..617c4235d971 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -972,7 +972,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	dma_addr_t phys_addr;
 	dma_addr_t txcmd_phys;
 	int txq_id = skb_get_queue_mapping(skb);
-	u16 len, idx, len_org, hdr_len;
+	u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */
 	u8 id;
 	u8 unicast;
 	u8 sta_id;
@@ -1074,6 +1074,40 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	/* Copy MAC header from skb into command buffer */
 	memcpy(tx->hdr, hdr, hdr_len);
 
+
+	if (info->control.hw_key)
+		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
+
+	/* TODO need this for burst mode later on */
+	iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
+
+	/* set is_hcca to 0; it probably will never be implemented */
+	iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
+
+	/* Total # bytes to be transmitted */
+	len = (u16)skb->len;
+	tx->len = cpu_to_le16(len);
+
+
+	tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+	tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+
+	if (!ieee80211_has_morefrags(hdr->frame_control)) {
+		txq->need_update = 1;
+		if (qc)
+			priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
+	} else {
+		wait_write_ptr = 1;
+		txq->need_update = 0;
+	}
+
+	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+		     le16_to_cpu(out_cmd->hdr.sequence));
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
+	iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
+	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
+			   ieee80211_hdrlen(fc));
+
 	/*
 	 * Use the first empty entry in this queue's command buffer array
 	 * to contain the Tx command and MAC header concatenated together
@@ -1096,22 +1130,18 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* Physical address of this Tx command's header (not MAC header!),
 	 * within command buffer array. */
-	txcmd_phys = pci_map_single(priv->pci_dev,
-				    out_cmd, sizeof(struct iwl_cmd),
-				    PCI_DMA_TODEVICE);
+	txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
+				    len, PCI_DMA_TODEVICE);
+	/* we do not map meta data ... so we can safely access address to
+	 * provide to unmap command*/
 	pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
-	pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
-	/* Add buffer containing Tx command and MAC(!) header to TFD's
-	 * first entry */
-	txcmd_phys += offsetof(struct iwl_cmd, hdr);
+	pci_unmap_len_set(&out_cmd->meta, len, len);
 
 	/* Add buffer containing Tx command and MAC(!) header to TFD's
 	 * first entry */
 	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
 						   txcmd_phys, len, 1, 0);
 
-	if (info->control.hw_key)
-		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
 	 * if any (802.11 null frames have no payload). */
@@ -1124,34 +1154,6 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 							   0, U32_PAD(len));
 	}
 
-	/* Total # bytes to be transmitted */
-	len = (u16)skb->len;
-	tx->len = cpu_to_le16(len);
-
-	/* TODO need this for burst mode later on */
-	iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
-
-	/* set is_hcca to 0; it probably will never be implemented */
-	iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
-
-	tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
-	tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
-
-	if (!ieee80211_has_morefrags(hdr->frame_control)) {
-		txq->need_update = 1;
-		if (qc)
-			priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
-	} else {
-		wait_write_ptr = 1;
-		txq->need_update = 0;
-	}
-
-	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
-		     le16_to_cpu(out_cmd->hdr.sequence));
-	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
-	iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
-	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
-			   ieee80211_hdrlen(fc));
 
 	/* Tell device the write index *just past* this latest filled TFD */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
@@ -1663,6 +1665,37 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv)
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
 
+void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+	unsigned long flags;
+	int i;
+	spin_lock_irqsave(&rxq->lock, flags);
+	INIT_LIST_HEAD(&rxq->rx_free);
+	INIT_LIST_HEAD(&rxq->rx_used);
+	/* Fill the rx_used queue with _all_ of the Rx buffers */
+	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+		/* In the reset function, these buffers may have been allocated
+		 * to an SKB, so we need to unmap and free potential storage */
+		if (rxq->pool[i].skb != NULL) {
+			pci_unmap_single(priv->pci_dev,
+					 rxq->pool[i].real_dma_addr,
+					 priv->hw_params.rx_buf_size,
+					 PCI_DMA_FROMDEVICE);
+			priv->alloc_rxb_skb--;
+			dev_kfree_skb(rxq->pool[i].skb);
+			rxq->pool[i].skb = NULL;
+		}
+		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+	}
+
+	/* Set us so that we have processed and used all buffers, but have
+	 * not restocked the Rx queue with fresh buffers */
+	rxq->read = rxq->write = 0;
+	rxq->free_count = 0;
+	spin_unlock_irqrestore(&rxq->lock, flags);
+}
+EXPORT_SYMBOL(iwl3945_rx_queue_reset);
+
 /*
  * this should be called while priv->lock is locked
  */
@@ -1687,6 +1720,34 @@ void iwl3945_rx_replenish(void *data)
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+	int i;
+	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+		if (rxq->pool[i].skb != NULL) {
+			pci_unmap_single(priv->pci_dev,
+					 rxq->pool[i].real_dma_addr,
+					 priv->hw_params.rx_buf_size,
+					 PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(rxq->pool[i].skb);
+		}
+	}
+
+	pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+			    rxq->dma_addr);
+	pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status),
+			    rxq->rb_stts, rxq->rb_stts_dma);
+	rxq->bd = NULL;
+	rxq->rb_stts  = NULL;
+}
+EXPORT_SYMBOL(iwl3945_rx_queue_free);
+
+
 /* Convert linear signal-to-noise ratio into dB */
 static u8 ratio2dB[100] = {
 /*	 0   1   2   3   4   5   6   7   8   9 */
@@ -1804,9 +1865,9 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 
 		rxq->queue[i] = NULL;
 
-		pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->real_dma_addr,
-					    priv->hw_params.rx_buf_size,
-					    PCI_DMA_FROMDEVICE);
+		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
+				priv->hw_params.rx_buf_size,
+				PCI_DMA_FROMDEVICE);
 		pkt = (struct iwl_rx_packet *)rxb->skb->data;
 
 		/* Reclaim a command buffer only if this packet is a response
@@ -1854,9 +1915,6 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 			rxb->skb = NULL;
 		}
 
-		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
-				priv->hw_params.rx_buf_size,
-				PCI_DMA_FROMDEVICE);
 		spin_lock_irqsave(&rxq->lock, flags);
 		list_add_tail(&rxb->list, &priv->rxq.rx_used);
 		spin_unlock_irqrestore(&rxq->lock, flags);
@@ -5203,7 +5261,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 	iwl3945_dealloc_ucode_pci(priv);
 
 	if (priv->rxq.bd)
-		iwl_rx_queue_free(priv, &priv->rxq);
+		iwl3945_rx_queue_free(priv, &priv->rxq);
 	iwl3945_hw_txq_ctx_free(priv);
 
 	iwl3945_unset_hw_params(priv);