iwlwifi: move under intel vendor directory

Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 0 insertions, 295 deletions

diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
deleted file mode 100644
index e68a475e3071..000000000000
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-
-#include <net/mac80211.h>
-#include "fw-api.h"
-#include "mvm.h"
-
-/* Maps the driver specific channel width definition to the fw values */
-u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
-{
-	switch (chandef->width) {
-	case NL80211_CHAN_WIDTH_20_NOHT:
-	case NL80211_CHAN_WIDTH_20:
-		return PHY_VHT_CHANNEL_MODE20;
-	case NL80211_CHAN_WIDTH_40:
-		return PHY_VHT_CHANNEL_MODE40;
-	case NL80211_CHAN_WIDTH_80:
-		return PHY_VHT_CHANNEL_MODE80;
-	case NL80211_CHAN_WIDTH_160:
-		return PHY_VHT_CHANNEL_MODE160;
-	default:
-		WARN(1, "Invalid channel width=%u", chandef->width);
-		return PHY_VHT_CHANNEL_MODE20;
-	}
-}
-
-/*
- * Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
- */
-u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
-{
-	switch (chandef->chan->center_freq - chandef->center_freq1) {
-	case -70:
-		return PHY_VHT_CTRL_POS_4_BELOW;
-	case -50:
-		return PHY_VHT_CTRL_POS_3_BELOW;
-	case -30:
-		return PHY_VHT_CTRL_POS_2_BELOW;
-	case -10:
-		return PHY_VHT_CTRL_POS_1_BELOW;
-	case  10:
-		return PHY_VHT_CTRL_POS_1_ABOVE;
-	case  30:
-		return PHY_VHT_CTRL_POS_2_ABOVE;
-	case  50:
-		return PHY_VHT_CTRL_POS_3_ABOVE;
-	case  70:
-		return PHY_VHT_CTRL_POS_4_ABOVE;
-	default:
-		WARN(1, "Invalid channel definition");
-	case 0:
-		/*
-		 * The FW is expected to check the control channel position only
-		 * when in HT/VHT and the channel width is not 20MHz. Return
-		 * this value as the default one.
-		 */
-		return PHY_VHT_CTRL_POS_1_BELOW;
-	}
-}
-
-/*
- * Construct the generic fields of the PHY context command
- */
-static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt,
-				     struct iwl_phy_context_cmd *cmd,
-				     u32 action, u32 apply_time)
-{
-	memset(cmd, 0, sizeof(struct iwl_phy_context_cmd));
-
-	cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id,
-							    ctxt->color));
-	cmd->action = cpu_to_le32(action);
-	cmd->apply_time = cpu_to_le32(apply_time);
-}
-
-/*
- * Add the phy configuration to the PHY context command
- */
-static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm,
-				      struct iwl_phy_context_cmd *cmd,
-				      struct cfg80211_chan_def *chandef,
-				      u8 chains_static, u8 chains_dynamic)
-{
-	u8 active_cnt, idle_cnt;
-
-	/* Set the channel info data */
-	cmd->ci.band = (chandef->chan->band == IEEE80211_BAND_2GHZ ?
-	      PHY_BAND_24 : PHY_BAND_5);
-
-	cmd->ci.channel = chandef->chan->hw_value;
-	cmd->ci.width = iwl_mvm_get_channel_width(chandef);
-	cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef);
-
-	/* Set rx the chains */
-	idle_cnt = chains_static;
-	active_cnt = chains_dynamic;
-
-	/* In scenarios where we only ever use a single-stream rates,
-	 * i.e. legacy 11b/g/a associations, single-stream APs or even
-	 * static SMPS, enable both chains to get diversity, improving
-	 * the case where we're far enough from the AP that attenuation
-	 * between the two antennas is sufficiently different to impact
-	 * performance.
-	 */
-	if (active_cnt == 1 && iwl_mvm_rx_diversity_allowed(mvm)) {
-		idle_cnt = 2;
-		active_cnt = 2;
-	}
-
-	cmd->rxchain_info = cpu_to_le32(iwl_mvm_get_valid_rx_ant(mvm) <<
-					PHY_RX_CHAIN_VALID_POS);
-	cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS);
-	cmd->rxchain_info |= cpu_to_le32(active_cnt <<
-					 PHY_RX_CHAIN_MIMO_CNT_POS);
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	if (unlikely(mvm->dbgfs_rx_phyinfo))
-		cmd->rxchain_info = cpu_to_le32(mvm->dbgfs_rx_phyinfo);
-#endif
-
-	cmd->txchain_info = cpu_to_le32(iwl_mvm_get_valid_tx_ant(mvm));
-}
-
-/*
- * Send a command to apply the current phy configuration. The command is send
- * only if something in the configuration changed: in case that this is the
- * first time that the phy configuration is applied or in case that the phy
- * configuration changed from the previous apply.
- */
-static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm,
-				  struct iwl_mvm_phy_ctxt *ctxt,
-				  struct cfg80211_chan_def *chandef,
-				  u8 chains_static, u8 chains_dynamic,
-				  u32 action, u32 apply_time)
-{
-	struct iwl_phy_context_cmd cmd;
-	int ret;
-
-	/* Set the command header fields */
-	iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time);
-
-	/* Set the command data */
-	iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef,
-				  chains_static, chains_dynamic);
-
-	ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, 0,
-				   sizeof(struct iwl_phy_context_cmd),
-				   &cmd);
-	if (ret)
-		IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret);
-	return ret;
-}
-
-/*
- * Send a command to add a PHY context based on the current HW configuration.
- */
-int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
-			 struct cfg80211_chan_def *chandef,
-			 u8 chains_static, u8 chains_dynamic)
-{
-	WARN_ON(!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) &&
-		ctxt->ref);
-	lockdep_assert_held(&mvm->mutex);
-
-	ctxt->channel = chandef->chan;
-
-	return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
-				      chains_static, chains_dynamic,
-				      FW_CTXT_ACTION_ADD, 0);
-}
-
-/*
- * Update the number of references to the given PHY context. This is valid only
- * in case the PHY context was already created, i.e., its reference count > 0.
- */
-void iwl_mvm_phy_ctxt_ref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
-{
-	lockdep_assert_held(&mvm->mutex);
-	ctxt->ref++;
-}
-
-/*
- * Send a command to modify the PHY context based on the current HW
- * configuration. Note that the function does not check that the configuration
- * changed.
- */
-int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
-			     struct cfg80211_chan_def *chandef,
-			     u8 chains_static, u8 chains_dynamic)
-{
-	lockdep_assert_held(&mvm->mutex);
-
-	ctxt->channel = chandef->chan;
-	return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
-				      chains_static, chains_dynamic,
-				      FW_CTXT_ACTION_MODIFY, 0);
-}
-
-void iwl_mvm_phy_ctxt_unref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
-{
-	lockdep_assert_held(&mvm->mutex);
-
-	if (WARN_ON_ONCE(!ctxt))
-		return;
-
-	ctxt->ref--;
-}
-
-static void iwl_mvm_binding_iterator(void *_data, u8 *mac,
-				     struct ieee80211_vif *vif)
-{
-	unsigned long *data = _data;
-	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-
-	if (!mvmvif->phy_ctxt)
-		return;
-
-	if (vif->type == NL80211_IFTYPE_STATION ||
-	    vif->type == NL80211_IFTYPE_AP)
-		__set_bit(mvmvif->phy_ctxt->id, data);
-}
-
-int iwl_mvm_phy_ctx_count(struct iwl_mvm *mvm)
-{
-	unsigned long phy_ctxt_counter = 0;
-
-	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
-						   IEEE80211_IFACE_ITER_NORMAL,
-						   iwl_mvm_binding_iterator,
-						   &phy_ctxt_counter);
-
-	return hweight8(phy_ctxt_counter);
-}