orinoco: Move sources to a subdirectory

Keeping all the orinoco drivers in a common directory will make
maintenance easier.

Signed-off by: David Kilroy <kilroyd@googlemail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 248 deletions

diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c
deleted file mode 100644
index ede24ec309c0..000000000000
--- a/drivers/net/wireless/orinoco_tmd.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/* orinoco_tmd.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a TMD7160. 
- *
- * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
- * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * The actual driving is done by orinoco.c, this is just resource
- * allocation stuff.
- *
- * This driver is modeled after the orinoco_plx driver. The main
- * difference is that the TMD chip has only IO port ranges and doesn't
- * provide access to the PCMCIA attribute space.
- *
- * Pheecom sells cards with the TMD chip as "ASIC version"
- */
-
-#define DRIVER_NAME "orinoco_tmd"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_VALUE	(COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-#define COR_RESET     (0x80)	/* reset bit in the COR register */
-#define TMD_RESET_TIME	(500)	/* milliseconds */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- */
-static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
-{
-	hermes_t *hw = &priv->hw;
-	struct orinoco_pci_card *card = priv->card;
-	unsigned long timeout;
-	u16 reg;
-
-	iowrite8(COR_VALUE | COR_RESET, card->bridge_io);
-	mdelay(1);
-
-	iowrite8(COR_VALUE, card->bridge_io);
-	mdelay(1);
-
-	/* Just in case, wait more until the card is no longer busy */
-	timeout = jiffies + (TMD_RESET_TIME * HZ / 1000);
-	reg = hermes_read_regn(hw, CMD);
-	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
-		mdelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-
-	/* Still busy? */
-	if (reg & HERMES_CMD_BUSY) {
-		printk(KERN_ERR PFX "Busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-
-static int orinoco_tmd_init_one(struct pci_dev *pdev,
-				const struct pci_device_id *ent)
-{
-	int err;
-	struct orinoco_private *priv;
-	struct orinoco_pci_card *card;
-	struct net_device *dev;
-	void __iomem *hermes_io, *bridge_io;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot enable PCI device\n");
-		return err;
-	}
-
-	err = pci_request_regions(pdev, DRIVER_NAME);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
-		goto fail_resources;
-	}
-
-	bridge_io = pci_iomap(pdev, 1, 0);
-	if (!bridge_io) {
-		printk(KERN_ERR PFX "Cannot map bridge registers\n");
-		err = -EIO;
-		goto fail_map_bridge;
-	}
-
-	hermes_io = pci_iomap(pdev, 2, 0);
-	if (!hermes_io) {
-		printk(KERN_ERR PFX "Cannot map chipset registers\n");
-		err = -EIO;
-		goto fail_map_hermes;
-	}
-
-	/* Allocate network device */
-	dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
-			       orinoco_tmd_cor_reset, NULL);
-	if (!dev) {
-		printk(KERN_ERR PFX "Cannot allocate network device\n");
-		err = -ENOMEM;
-		goto fail_alloc;
-	}
-
-	priv = netdev_priv(dev);
-	card = priv->card;
-	card->bridge_io = bridge_io;
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
-	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
-			  dev->name, dev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
-		err = -EBUSY;
-		goto fail_irq;
-	}
-
-	err = orinoco_tmd_cor_reset(priv);
-	if (err) {
-		printk(KERN_ERR PFX "Initial reset failed\n");
-		goto fail;
-	}
-
-	err = register_netdev(dev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot register network device\n");
-		goto fail;
-	}
-
-	pci_set_drvdata(pdev, dev);
-	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
-	       pci_name(pdev));
-
-	return 0;
-
- fail:
-	free_irq(pdev->irq, dev);
-
- fail_irq:
-	pci_set_drvdata(pdev, NULL);
-	free_orinocodev(dev);
-
- fail_alloc:
-	pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
-	pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
-	pci_release_regions(pdev);
-
- fail_resources:
-	pci_disable_device(pdev);
-
-	return err;
-}
-
-static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct orinoco_private *priv = netdev_priv(dev);
-	struct orinoco_pci_card *card = priv->card;
-
-	unregister_netdev(dev);
-	free_irq(pdev->irq, dev);
-	pci_set_drvdata(pdev, NULL);
-	free_orinocodev(dev);
-	pci_iounmap(pdev, priv->hw.iobase);
-	pci_iounmap(pdev, card->bridge_io);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-static struct pci_device_id orinoco_tmd_id_table[] = {
-	{0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,},      /* NDC and OEMs, e.g. pheecom */
-	{0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table);
-
-static struct pci_driver orinoco_tmd_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= orinoco_tmd_id_table,
-	.probe		= orinoco_tmd_init_one,
-	.remove		= __devexit_p(orinoco_tmd_remove_one),
-	.suspend	= orinoco_pci_suspend,
-	.resume		= orinoco_pci_resume,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (Joerg Dorchain <joerg@dorchain.net>)";
-MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_tmd_init(void)
-{
-	printk(KERN_DEBUG "%s\n", version);
-	return pci_register_driver(&orinoco_tmd_driver);
-}
-
-static void __exit orinoco_tmd_exit(void)
-{
-	pci_unregister_driver(&orinoco_tmd_driver);
-}
-
-module_init(orinoco_tmd_init);
-module_exit(orinoco_tmd_exit);
-
-/*
- * Local variables:
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */