Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

1 files changed, 99 insertions, 4 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 4db1088a847f..a7630d5ec892 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -51,6 +51,7 @@
  * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
  * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
  * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
+ * RF5592 2.4G/5G 2T2R
  * RF5360 2.4G 1T1R
  * RF5370 2.4G 1T1R
  * RF5390 2.4G 1T1R
@@ -68,6 +69,7 @@
 #define RF3320				0x000b
 #define RF3322				0x000c
 #define RF3053				0x000d
+#define RF5592				0x000f
 #define RF3290				0x3290
 #define RF5360				0x5360
 #define RF5370				0x5370
@@ -88,11 +90,8 @@
 #define REV_RT3390E			0x0211
 #define REV_RT5390F			0x0502
 #define REV_RT5390R			0x1502
+#define REV_RT5592C			0x0221
 
-/*
- * Signal information.
- * Default offset is required for RSSI <-> dBm conversion.
- */
 #define DEFAULT_RSSI_OFFSET		120
 
 /*
@@ -690,6 +689,12 @@
 #define GPIO_SWITCH_7			FIELD32(0x00000080)
 
 /*
+ * FIXME: where the DEBUG_INDEX name come from?
+ */
+#define MAC_DEBUG_INDEX			0x05e8
+#define MAC_DEBUG_INDEX_XTAL		FIELD32(0x80000000)
+
+/*
  * MAC Control/Status Registers(CSR).
  * Some values are set in TU, whereas 1 TU == 1024 us.
  */
@@ -1934,6 +1939,9 @@ struct mac_iveiv_entry {
 #define BBP4_BANDWIDTH			FIELD8(0x18)
 #define BBP4_MAC_IF_CTRL		FIELD8(0x40)
 
+/* BBP27 */
+#define BBP27_RX_CHAIN_SEL		FIELD8(0x60)
+
 /*
  * BBP 47: Bandwidth
  */
@@ -1948,6 +1956,20 @@ struct mac_iveiv_entry {
 #define BBP49_UPDATE_FLAG		FIELD8(0x01)
 
 /*
+ * BBP 105:
+ * - bit0: detect SIG on primary channel only (on 40MHz bandwidth)
+ * - bit1: FEQ (Feed Forward Compensation) for independend streams
+ * - bit2: MLD (Maximum Likehood Detection) for 2 streams (reserved on single
+ *	   stream)
+ * - bit4: channel estimation updates based on remodulation of
+ *	   L-SIG and HT-SIG symbols
+ */
+#define BBP105_DETECT_SIG_ON_PRIMARY	FIELD8(0x01)
+#define BBP105_FEQ			FIELD8(0x02)
+#define BBP105_MLD			FIELD8(0x04)
+#define BBP105_SIG_REMODULATION		FIELD8(0x08)
+
+/*
  * BBP 109
  */
 #define BBP109_TX0_POWER		FIELD8(0x0f)
@@ -1967,6 +1989,11 @@ struct mac_iveiv_entry {
 #define BBP152_RX_DEFAULT_ANT		FIELD8(0x80)
 
 /*
+ * BBP 254: unknown
+ */
+#define BBP254_BIT7			FIELD8(0x80)
+
+/*
  * RFCSR registers
  * The wordsize of the RFCSR is 8 bits.
  */
@@ -2022,9 +2049,18 @@ struct mac_iveiv_entry {
 #define RFCSR7_BITS67			FIELD8(0xc0)
 
 /*
+ * RFCSR 9:
+ */
+#define RFCSR9_K			FIELD8(0x0f)
+#define RFCSR9_N			FIELD8(0x10)
+#define RFCSR9_UNKNOWN			FIELD8(0x60)
+#define RFCSR9_MOD			FIELD8(0x80)
+
+/*
  * RFCSR 11:
  */
 #define RFCSR11_R			FIELD8(0x03)
+#define RFCSR11_MOD			FIELD8(0xc0)
 
 /*
  * RFCSR 12:
@@ -2130,11 +2166,13 @@ struct mac_iveiv_entry {
  * RFCSR 49:
  */
 #define RFCSR49_TX			FIELD8(0x3f)
+#define RFCSR49_EP			FIELD8(0xc0)
 
 /*
  * RFCSR 50:
  */
 #define RFCSR50_TX			FIELD8(0x3f)
+#define RFCSR50_EP			FIELD8(0xc0)
 
 /*
  * RF registers
@@ -2497,6 +2535,61 @@ struct mac_iveiv_entry {
 #define EEPROM_BBP_REG_ID		FIELD16(0xff00)
 
 /*
+ * EEPROM IQ Calibration, unlike other entries those are byte addresses.
+ */
+
+#define EEPROM_IQ_GAIN_CAL_TX0_2G			0x130
+#define EEPROM_IQ_PHASE_CAL_TX0_2G			0x131
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_2G			0x132
+#define EEPROM_IQ_GAIN_CAL_TX1_2G			0x133
+#define EEPROM_IQ_PHASE_CAL_TX1_2G			0x134
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_2G			0x135
+#define EEPROM_IQ_GAIN_CAL_RX0_2G			0x136
+#define EEPROM_IQ_PHASE_CAL_RX0_2G			0x137
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_2G			0x138
+#define EEPROM_IQ_GAIN_CAL_RX1_2G			0x139
+#define EEPROM_IQ_PHASE_CAL_RX1_2G			0x13A
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_2G			0x13B
+#define EEPROM_RF_IQ_COMPENSATION_CONTROL		0x13C
+#define EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL	0x13D
+#define EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G		0x144
+#define EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G		0x145
+#define EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G	0X146
+#define EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G	0x147
+#define EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G	0x148
+#define EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G	0x149
+#define EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G		0x14A
+#define EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G		0x14B
+#define EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G	0X14C
+#define EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G	0x14D
+#define EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G	0x14E
+#define EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G	0x14F
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH36_TO_CH64_5G	0x150
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH36_TO_CH64_5G	0x151
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH100_TO_CH138_5G	0x152
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH100_TO_CH138_5G	0x153
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH140_TO_CH165_5G	0x154
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH140_TO_CH165_5G	0x155
+#define EEPROM_IQ_GAIN_CAL_RX0_CH36_TO_CH64_5G		0x156
+#define EEPROM_IQ_PHASE_CAL_RX0_CH36_TO_CH64_5G		0x157
+#define EEPROM_IQ_GAIN_CAL_RX0_CH100_TO_CH138_5G	0X158
+#define EEPROM_IQ_PHASE_CAL_RX0_CH100_TO_CH138_5G	0x159
+#define EEPROM_IQ_GAIN_CAL_RX0_CH140_TO_CH165_5G	0x15A
+#define EEPROM_IQ_PHASE_CAL_RX0_CH140_TO_CH165_5G	0x15B
+#define EEPROM_IQ_GAIN_CAL_RX1_CH36_TO_CH64_5G		0x15C
+#define EEPROM_IQ_PHASE_CAL_RX1_CH36_TO_CH64_5G		0x15D
+#define EEPROM_IQ_GAIN_CAL_RX1_CH100_TO_CH138_5G	0X15E
+#define EEPROM_IQ_PHASE_CAL_RX1_CH100_TO_CH138_5G	0x15F
+#define EEPROM_IQ_GAIN_CAL_RX1_CH140_TO_CH165_5G	0x160
+#define EEPROM_IQ_PHASE_CAL_RX1_CH140_TO_CH165_5G	0x161
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH36_TO_CH64_5G	0x162
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH36_TO_CH64_5G	0x163
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH100_TO_CH138_5G	0x164
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH100_TO_CH138_5G	0x165
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH140_TO_CH165_5G	0x166
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH140_TO_CH165_5G	0x167
+
+/*
  * MCU mailbox commands.
  * MCU_SLEEP - go to power-save mode.
  *             arg1: 1: save as much power as possible, 0: save less power.
@@ -2535,6 +2628,8 @@ struct mac_iveiv_entry {
 #define TXWI_DESC_SIZE			(4 * sizeof(__le32))
 #define RXWI_DESC_SIZE			(4 * sizeof(__le32))
 
+#define TXWI_DESC_SIZE_5592		(5 * sizeof(__le32))
+#define RXWI_DESC_SIZE_5592		(6 * sizeof(__le32))
 /*
  * TX WI structure
  */