wl1251: move to it's own directory

wl1271 driver is under heavy development but on the other hand the older
wl1251 driver is currently considered more as a legacy driver. To make it
easier to develop wl1271 features move wl1251 to it's own directory,
drivers/net/wireless/wl1251.

There are no functional changes, only moving of files. One regression
is that Kconfig won't be updated automatically and user needs to enable
wl1251 manually with an older config file.

Signed-off-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 231 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.h b/drivers/net/wireless/wl12xx/wl1251_tx.h
deleted file mode 100644
index 96011e78cd5a..000000000000
--- a/drivers/net/wireless/wl12xx/wl1251_tx.h
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * This file is part of wl1251
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL1251_TX_H__
-#define __WL1251_TX_H__
-
-#include <linux/bitops.h>
-#include "wl1251_acx.h"
-
-/*
- *
- * TX PATH
- *
- * The Tx path uses a double buffer and a tx_control structure, each located
- * at a fixed address in the device's memory. On startup, the host retrieves
- * the pointers to these addresses. A double buffer allows for continuous data
- * flow towards the device. The host keeps track of which buffer is available
- * and alternates between these two buffers on a per packet basis.
- *
- * The size of each of the two buffers is large enough to hold the longest
- * 802.3 packet - maximum size Ethernet packet + header + descriptor.
- * TX complete indication will be received a-synchronously in a TX done cyclic
- * buffer which is composed of 16 tx_result descriptors structures and is used
- * in a cyclic manner.
- *
- * The TX (HOST) procedure is as follows:
- * 1. Read the Tx path status, that will give the data_out_count.
- * 2. goto 1, if not possible.
- *    i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
- *    buffer).
- * 3. Copy the packet (preceded by double_buffer_desc), if possible.
- *    i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
- *    buffer).
- * 4. increment data_in_count.
- * 5. Inform the firmware by generating a firmware internal interrupt.
- * 6. FW will increment data_out_count after it reads the buffer.
- *
- * The TX Complete procedure:
- * 1. To get a TX complete indication the host enables the tx_complete flag in
- *    the TX descriptor Structure.
- * 2. For each packet with a Tx Complete field set, the firmware adds the
- *    transmit results to the cyclic buffer (txDoneRing) and sets both done_1
- *    and done_2 to 1 to indicate driver ownership.
- * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
- *    host to process the new data. Note: interrupt will be send per packet if
- *    TX complete indication was requested in tx_control or per crossing
- *    aggregation threshold.
- * 4. After receiving the Tx Complete interrupt, the host reads the
- *    TxDescriptorDone information in a cyclic manner and clears both done_1
- *    and done_2 fields.
- *
- */
-
-#define TX_COMPLETE_REQUIRED_BIT	0x80
-#define TX_STATUS_DATA_OUT_COUNT_MASK   0xf
-
-#define WL1251_TX_ALIGN_TO 4
-#define WL1251_TX_ALIGN(len) (((len) + WL1251_TX_ALIGN_TO - 1) & \
-			     ~(WL1251_TX_ALIGN_TO - 1))
-#define WL1251_TKIP_IV_SPACE 4
-
-struct tx_control {
-	/* Rate Policy (class) index */
-	unsigned rate_policy:3;
-
-	/* When set, no ack policy is expected */
-	unsigned ack_policy:1;
-
-	/*
-	 * Packet type:
-	 * 0 -> 802.11
-	 * 1 -> 802.3
-	 * 2 -> IP
-	 * 3 -> raw codec
-	 */
-	unsigned packet_type:2;
-
-	/* If set, this is a QoS-Null or QoS-Data frame */
-	unsigned qos:1;
-
-	/*
-	 * If set, the target triggers the tx complete INT
-	 * upon frame sending completion.
-	 */
-	unsigned tx_complete:1;
-
-	/* 2 bytes padding before packet header */
-	unsigned xfer_pad:1;
-
-	unsigned reserved:7;
-} __packed;
-
-
-struct tx_double_buffer_desc {
-	/* Length of payload, including headers. */
-	__le16 length;
-
-	/*
-	 * A bit mask that specifies the initial rate to be used
-	 * Possible values are:
-	 * 0x0001 - 1Mbits
-	 * 0x0002 - 2Mbits
-	 * 0x0004 - 5.5Mbits
-	 * 0x0008 - 6Mbits
-	 * 0x0010 - 9Mbits
-	 * 0x0020 - 11Mbits
-	 * 0x0040 - 12Mbits
-	 * 0x0080 - 18Mbits
-	 * 0x0100 - 22Mbits
-	 * 0x0200 - 24Mbits
-	 * 0x0400 - 36Mbits
-	 * 0x0800 - 48Mbits
-	 * 0x1000 - 54Mbits
-	 */
-	__le16 rate;
-
-	/* Time in us that a packet can spend in the target */
-	__le32 expiry_time;
-
-	/* index of the TX queue used for this packet */
-	u8 xmit_queue;
-
-	/* Used to identify a packet */
-	u8 id;
-
-	struct tx_control control;
-
-	/*
-	 * The FW should cut the packet into fragments
-	 * of this size.
-	 */
-	__le16 frag_threshold;
-
-	/* Numbers of HW queue blocks to be allocated */
-	u8 num_mem_blocks;
-
-	u8 reserved;
-} __packed;
-
-enum {
-	TX_SUCCESS              = 0,
-	TX_DMA_ERROR            = BIT(7),
-	TX_DISABLED             = BIT(6),
-	TX_RETRY_EXCEEDED       = BIT(5),
-	TX_TIMEOUT              = BIT(4),
-	TX_KEY_NOT_FOUND        = BIT(3),
-	TX_ENCRYPT_FAIL         = BIT(2),
-	TX_UNAVAILABLE_PRIORITY = BIT(1),
-};
-
-struct tx_result {
-	/*
-	 * Ownership synchronization between the host and
-	 * the firmware. If done_1 and done_2 are cleared,
-	 * owned by the FW (no info ready).
-	 */
-	u8 done_1;
-
-	/* same as double_buffer_desc->id */
-	u8 id;
-
-	/*
-	 * Total air access duration consumed by this
-	 * packet, including all retries and overheads.
-	 */
-	u16 medium_usage;
-
-	/* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
-	u32 medium_delay;
-
-	/* Time between host xfer and tx complete */
-	u32 fw_hnadling_time;
-
-	/* The LS-byte of the last TKIP sequence number. */
-	u8 lsb_seq_num;
-
-	/* Retry count */
-	u8 ack_failures;
-
-	/* At which rate we got a ACK */
-	u16 rate;
-
-	u16 reserved;
-
-	/* TX_* */
-	u8 status;
-
-	/* See done_1 */
-	u8 done_2;
-} __packed;
-
-static inline int wl1251_tx_get_queue(int queue)
-{
-	switch (queue) {
-	case 0:
-		return QOS_AC_VO;
-	case 1:
-		return QOS_AC_VI;
-	case 2:
-		return QOS_AC_BE;
-	case 3:
-		return QOS_AC_BK;
-	default:
-		return QOS_AC_BE;
-	}
-}
-
-void wl1251_tx_work(struct work_struct *work);
-void wl1251_tx_complete(struct wl1251 *wl);
-void wl1251_tx_flush(struct wl1251 *wl);
-
-#endif