NFC: pn544: i2c: Support PN544 C3 secure firmware download

PN544 C3 firmwares already contain the command frames to be sent, but as
they may exceed the i2c maximum payload, we need to fragment them into
secure chunks and send them through the secure write command.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 174 insertions, 6 deletions

diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c
index c7e277cddb48..f2acd85be86e 100644
--- a/drivers/nfc/pn544/i2c.c
+++ b/drivers/nfc/pn544/i2c.c
@@ -66,8 +66,11 @@ MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);
 #define PN544_HW_VARIANT_C2 0xa
 #define PN544_HW_VARIANT_C3 0xb
 
+#define PN544_FW_CMD_RESET 0x01
 #define PN544_FW_CMD_WRITE 0x08
 #define PN544_FW_CMD_CHECK 0x06
+#define PN544_FW_CMD_SECURE_WRITE 0x0C
+#define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D
 
 struct pn544_i2c_fw_frame_write {
 	u8 cmd;
@@ -96,13 +99,31 @@ struct pn544_i2c_fw_blob {
 	u8 data[];
 };
 
+struct pn544_i2c_fw_secure_frame {
+	u8 cmd;
+	u16 be_datalen;
+	u8 data[];
+} __packed;
+
+struct pn544_i2c_fw_secure_blob {
+	u64 header;
+	u8 data[];
+};
+
 #define PN544_FW_CMD_RESULT_TIMEOUT 0x01
 #define PN544_FW_CMD_RESULT_BAD_CRC 0x02
 #define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08
 #define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B
 #define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11
+#define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13
 #define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18
+#define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19
+#define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D
+#define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20
+#define PN544_FW_CMD_RESULT_CHUNK_OK 0x21
 #define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74
+#define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0
+#define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6
 
 #define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
 
@@ -112,11 +133,17 @@ struct pn544_i2c_fw_blob {
 #define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\
 					 PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\
 					 PN544_FW_WRITE_BUFFER_MAX_LEN)
+#define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3
+#define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\
+			PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN)
+#define PN544_FW_SECURE_FRAME_HEADER_LEN 3
+#define PN544_FW_SECURE_BLOB_HEADER_LEN 8
 
 #define FW_WORK_STATE_IDLE 1
 #define FW_WORK_STATE_START 2
 #define FW_WORK_STATE_WAIT_WRITE_ANSWER 3
 #define FW_WORK_STATE_WAIT_CHECK_ANSWER 4
+#define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5
 
 struct pn544_i2c_phy {
 	struct i2c_client *i2c_dev;
@@ -137,6 +164,8 @@ struct pn544_i2c_phy {
 	size_t fw_blob_size;
 	const u8 *fw_blob_data;
 	size_t fw_written;
+	size_t fw_size;
+
 	int fw_cmd_result;
 
 	int powered;
@@ -400,6 +429,8 @@ static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
 	switch (response.status) {
 	case 0:
 		return 0;
+	case PN544_FW_CMD_RESULT_CHUNK_OK:
+		return response.status;
 	case PN544_FW_CMD_RESULT_TIMEOUT:
 		return -ETIMEDOUT;
 	case PN544_FW_CMD_RESULT_BAD_CRC:
@@ -410,9 +441,20 @@ static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
 		return -EPROTO;
 	case PN544_FW_CMD_RESULT_INVALID_PARAMETER:
 		return -EINVAL;
+	case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND:
+		return -ENOTSUPP;
 	case PN544_FW_CMD_RESULT_INVALID_LENGTH:
 		return -EBADMSG;
+	case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR:
+		return -ENOKEY;
+	case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR:
+		return -EINVAL;
+	case PN544_FW_CMD_RESULT_MEMORY_ERROR:
+		return -ENOMEM;
+	case PN544_FW_CMD_RESULT_COMMAND_REJECTED:
+		return -EACCES;
 	case PN544_FW_CMD_RESULT_WRITE_FAILED:
+	case PN544_FW_CMD_RESULT_CHUNK_ERROR:
 		return -EIO;
 	default:
 		return -EIO;
@@ -610,12 +652,93 @@ static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy)
 	return 0;
 }
 
+static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy,
+					const u8 *data, u16 datalen)
+{
+	u8 buf[PN544_FW_I2C_MAX_PAYLOAD];
+	struct pn544_i2c_fw_secure_frame *chunk;
+	int chunklen;
+	int r;
+
+	if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN)
+		datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN;
+
+	chunk = (struct pn544_i2c_fw_secure_frame *) buf;
+
+	chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE;
+
+	put_unaligned_be16(datalen, &chunk->be_datalen);
+
+	memcpy(chunk->data, data, datalen);
+
+	chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen;
+
+	r = i2c_master_send(phy->i2c_dev, buf, chunklen);
+
+	if (r == chunklen)
+		return datalen;
+	else if (r < 0)
+		return r;
+	else
+		return -EIO;
+
+}
+
+static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy)
+{
+	struct pn544_i2c_fw_secure_frame *framep;
+	int r;
+
+	framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data;
+	if (phy->fw_written == 0)
+		phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen)
+				+ PN544_FW_SECURE_FRAME_HEADER_LEN;
+
+	/* Only secure write command can be chunked*/
+	if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD &&
+			framep->cmd != PN544_FW_CMD_SECURE_WRITE)
+		return -EINVAL;
+
+	/* The firmware also have other commands, we just send them directly */
+	if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) {
+		r = i2c_master_send(phy->i2c_dev,
+			(const char *) phy->fw_blob_data, phy->fw_blob_size);
+
+		if (r == phy->fw_blob_size)
+			goto exit;
+		else if (r < 0)
+			return r;
+		else
+			return -EIO;
+	}
+
+	r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy,
+				       phy->fw_blob_data + phy->fw_written,
+				       phy->fw_blob_size - phy->fw_written);
+	if (r < 0)
+		return r;
+
+exit:
+	phy->fw_written += r;
+	phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER;
+
+	/* SW reset command will not trig any response from PN544 */
+	if (framep->cmd == PN544_FW_CMD_RESET) {
+		pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
+		phy->fw_cmd_result = 0;
+		schedule_work(&phy->fw_work);
+	}
+
+	return 0;
+}
+
 static void pn544_hci_i2c_fw_work(struct work_struct *work)
 {
 	struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy,
 						fw_work);
 	int r;
 	struct pn544_i2c_fw_blob *blob;
+	struct pn544_i2c_fw_secure_blob *secure_blob;
 
 	switch (phy->fw_work_state) {
 	case FW_WORK_STATE_START:
@@ -626,13 +749,29 @@ static void pn544_hci_i2c_fw_work(struct work_struct *work)
 		if (r < 0)
 			goto exit_state_start;
 
-		blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
-		phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
-		phy->fw_blob_dest_addr = get_unaligned_be32(&blob->be_destaddr);
-		phy->fw_blob_data = blob->data;
-
 		phy->fw_written = 0;
-		r = pn544_hci_i2c_fw_write_chunk(phy);
+
+		switch (phy->hw_variant) {
+		case PN544_HW_VARIANT_C2:
+			blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
+			phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
+			phy->fw_blob_dest_addr = get_unaligned_be32(
+							&blob->be_destaddr);
+			phy->fw_blob_data = blob->data;
+
+			r = pn544_hci_i2c_fw_write_chunk(phy);
+			break;
+		case PN544_HW_VARIANT_C3:
+			secure_blob = (struct pn544_i2c_fw_secure_blob *)
+								phy->fw->data;
+			phy->fw_blob_data = secure_blob->data;
+			phy->fw_size = phy->fw->size;
+			r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			break;
+		default:
+			r = -ENOTSUPP;
+			break;
+		}
 
 exit_state_start:
 		if (r < 0)
@@ -684,6 +823,35 @@ exit_state_wait_check_answer:
 			pn544_hci_i2c_fw_work_complete(phy, r);
 		break;
 
+	case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER:
+		r = phy->fw_cmd_result;
+		if (r < 0)
+			goto exit_state_wait_secure_write_answer;
+
+		if (r == PN544_FW_CMD_RESULT_CHUNK_OK) {
+			r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			goto exit_state_wait_secure_write_answer;
+		}
+
+		if (phy->fw_written == phy->fw_blob_size) {
+			secure_blob = (struct pn544_i2c_fw_secure_blob *)
+				(phy->fw_blob_data + phy->fw_blob_size);
+			phy->fw_size -= phy->fw_blob_size +
+				PN544_FW_SECURE_BLOB_HEADER_LEN;
+			if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN
+					+ PN544_FW_SECURE_FRAME_HEADER_LEN) {
+				phy->fw_blob_data = secure_blob->data;
+
+				phy->fw_written = 0;
+				r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			}
+		}
+
+exit_state_wait_secure_write_answer:
+		if (r < 0 || phy->fw_size == 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
 	default:
 		break;
 	}